#🔧│keyboard_modding
1 messages · Page 445 of 1
seems better on contrast, but again ultimately its your preference
color contrast is important for me 😄
and the color theme is still my preference, not to worry ❤️
this is probably the best one available out of all the KAT profiles but i like blue hahaha
https://cannonkeys.com/products/kat-mizu different types as well
Mizu is back, this time in KAT profile doubleshot PBT! Renders (right) and doubleshot production models (left) shown side by side. Scroll through for comparison. We've heard all your feedback, and know you've all been waiting for this - KAT Mizu is here! Inspired by water (Mizu is water in Japanese), this set features
sweet thanks
which base do you like the best? the klight best is my choice for that
oh on the link i sent xD
i got nothin, i havent touched these things since I modded my 60he
Wahts up man?
dyk how stabs work
he took it off
ill try using chat
hes asking how to put it back
i fixed it kinda
butwheniputmykeycapback
itjustgoesdown
andlikedoesnt
idkman
idkhowtoexsplainit
oh its stuck
yeah
ur 360p video shows nothing
itwontgoupanddown
ok sounds like a clip on the side is broken and it gets pushed into the keyboard when u put on key?
i hate stabs, honestly.
how hard did you smash the keyboard? 😄
your wire isn’t in the stem
from the looks of it
remove the wire, push the stem down and insert the wire again
ok yeah i know the issue
the stabs are either not in correctly or its broken somehow
^
thats rough
then the stem stuff
comes out on the
that thing
n i forced it back in while it still being in the keycap
yea i have
i tried like
yea i dont even know
lemme see
so take the wire out of that side, push the stem down and then insert the wire
it’s impressive you managed to pull the stem above the wire tbh
hahaahah yeah
kinda looks like it but hope its fixable for him
😬
looks like he pulled the stem out of the wire
I have no clue how that even happened
snapping that little cross plastic piece
it shouldn’t even be possible lol
how does that even happen
😭
yanking it maybe?
He is HIM
Well he is gone now so either furiously trying to fix it or his keyboard is lodged in the wall atm
🤣
thats rough, goddamn lmao
stabs are akways annoying to deal with. theyre so inconsistent
LOL
spacebar sounds so dogshit
it is
its whatever wooting did
i think i fucked the lube a bit
normal that spacebar sounds way different than the rest btw
anything with stabs
What do you do for work?
cause the Stab lube is generic molycote so ez to source if you work with some type of mechanical work
ah okay
so im confused
your scool have a workshop
so do i gotta relube stabs
nah
just if you wanted to
which 13 year olds are you guys scamming next? i know logan na dmr beast are tapped out
cus you can go steal some lube there
shld i get new stabs
was it broken
im 16
or just not in right like i said?
im not scamming
its a joke
my bad
nah thats gine
u dont really have to buy new stabs unless u have extra money lying around
okay but back to the stabs, was the stem broken or was the wire just not in right?
wire wasnt in right
the stem was like
my spacebar sounds pretty trash as well tbh, let mer ecord it
the other way around
so as long as stem is fine you dont need new
it dont sound like rest
which fucks me
yeah but thats normal
tape mod is so easy to do
Anything with stabs sound different than just single keys
i'd do that before relubing anything
get the friction pad @frosty coral and maybe screw in stabs (if you have the 60HE+).
hes just complaining about the spacebar
stf does this mean
yea ofc 60he
just trey the shift, enter etc
the ones with stabs
and you can hear that those also sound different
The friction pad Wooting sells. It’ll help the sound a lot.
- ?
If you want different stabs as well that are screw ins, you need the 60HE+, only the + version is compatible.
from website
From Wooting?
@frosty coral don't feel bad my spacebar sounds like this
ya
Then you have the 60HE+
sounds good
i want mine to sound like that
I’d still check the box if you have it though, just to be sure.
get knight v2 screw in stabs
sounds ceramic
That's with stock stabs
That's interesting actually
Friction Pad
A PC or FR4 plate
SW Knight V2 stabs.
should i get it for all my shit
I would
What I meant was, I'm using stock stabs but I modded it with plumbers tape, some grease. The case, foam types and key caps will change ur sound profile
or js sace
Will drastically improve the sound.
😂😂
lol
yeah but you hear in that vid that anything with stabs sound different
I want some magic foam too
I have sound dampening mat on mine 😂
can u guess my switches
your spacebar sounds atrocious, you either tune it and lube it or just order new stabs like knight v2, foam wont help you
fill your case with peanut butter
do you have pe switch pads for yours?
can u guys guess my switches
jades?
😂😂
just check the top housing
🤮
Tuning and lubing and plumbers mod really did wonders to my spacebar
you got jades of ali?
yeah
A sheet, both sheets or pads have a very minimal effect.
ah okay
remove a keycap and make a pic
if the top housing is translucent blue, it’s the Jade Pros. If not, it’s the Jades.
Telling u bro, tune, lube and mod those stock stabs first before u buy new ones ❤️
idk man
Pros!
buying new ones is a better idea, cus he has plate mount stabs right now
and one is broken.
buy knight v2
With new stabs, you still need to lube
i wld get 80he but bro that rgb shit pisses me off
but it takes like 15min at most.
yea lubin dont look hard
what rgb
RGB bar
mine sound decent and those are stock stabs. it sounded so ass before tuning
Why do u want the 80HE?
60 dont got arrows n it sucks but just lookjng for a final endgame kb
As case foam?
buy the 80he module then
sell it
yep

he doesn't like the 60
use mod tap
you can have arrow keys
what the fuck
tissue paper
Mod tap is a powerful feature that can help you create more dedicated or dual functional keys based on key press behavior. Tap the key for one action, hold the key for the second action.
For example, on the Wooting 60HE, You can map dedicated arrow keys on the right bottom keys while still having access to the original modifier keys. Let’s set ...
wtf
hold up maybe he's cooking
I used dedicated arrows like this because I didn’t use any of those keys.
no joke this shit made my stuff sound more thock
ohhhh
he's found the new meta
theres just rattling now
i mean, ur filling space, so i guess
steel plate with Jade Pros hurts
bro thats max level cope, just get new stabs 
why
So sharp
plumbers tape and grease solved 99% of my stab issues, just sayin,
I tested pros on my 60, I liked it
melt it down and make a keycap
I use 80he
show space
am i creazy or did i hear a rattle?
I'm surprised how little 80he modding videos are on YouTube, I thought there would be a whole bunch
it’s not the same on the 80
Not that much to mod.
not many cases yet
I meant that I already have pc plate on 80he
but planning to get fr4
from PC to FR4 is not as big of a change as from steel to PC or FR4
Mainly just like a video showing like the best layout to get a specific sound profile. There's still a decent amount of things you can do. A case is just one thing
I’d recommend it if you still use your 60HE.
Best layout?
Like switches?
Best mods, key caps, like design around how you build it
Plate, stabs, lubing, switches, key caps, foam, tape, etc... lots of stuff you can do to get a specific sound/feel. Just wish there was more out there
Stock stabs, kinda tuned
knight v2
Friction Pad
A PC or FR4 plate
SW Knight V2 stabs.
Friction Pad
A PC or FR4 plate
SW Knight V2 stabs.
Friction Pad
A PC or FR4 plate
SW Knight V2 stabs.
😌
im using the vinyl matt, thats why i was asking earlier xD
dyk what itll sound like
has any1 done it before
jade pri
steel case
Never used
and whatever u said
It’ll sound similar to the Optimum case
there’s a sound test
a similar one works
v1's baby xD hahaha
dont gotta br exact
Many requested a sound test with all the new switches in the Wooting 60HE. Now I can please all of you with a proper friction fit sound test! Switches tested in the video are the: Lekker V2, Genty Silent, regular Jade, Jade Pro, Jade Max, Magneto RGB, Magneto POM and the RAW HE.
🛒 Get the Friction fit pad https://wooting.io/product/friction-fit...
I got a 10meter poron sheet from ali like 2-3 years ago
and still didn’t run out lol
thats a good investment right there
same
i dont think ive ever used those bottom right corner keys ever
so might as well make them arrow keys
i also switched the FN and the caps lock key
cuz i dont use caps lock i just hold shift
people that press caps lock, start typing and press caps lock again don’t exist
idc if people say they do that
they’re lying
😂😂
fr caps lock is not a real key
i’m never gonna understand why
lowk bro
i used to do that
idk the guy keeps switching on n off
if i had an actual sound test
maybe it wld change
its someone who hasnt actually used the board looks like
nvm
since theyre talking about sound tests
when did u get ur board?
Cuz of the wobble?
i modded mine like 2 weeks ago
what are u comparing traymount to
the sound, as crazy as that is
bruh idk a word ur saying
friction
sory
"hardmount" is just some weirdass way to say traymount
it’s alr
Fair
should i use the normal wooting stock foam or keep the tofu foam
but woot’s stock foam doesn’t fit in the tofu unless your tear the top half off
jade pros steel case
maybe he's just hard rn
it fits, but very compressed*
hardmount is wild
prolly not worth it
Hey guys does someone know how i can eliminate this sound ? When i slightly tap on the spacebar it makes this sound i tried so many things other stabs balancing the wire other keycaps other switches does anyone have suggestions ? I also have tape in my spacebar
no
wire balancing
fml
grease
I tried that but did not help
grease
grease + plumbers mod
what the hell is plumbers mod
press the keycap firmly on the stabs, both sides. If that doesn’t help, then balance the wire, it’ll be very slightly bent/offset

I have knight v2 stabs i read that krytox 205g0 is best for the wire cause the grease may interact with the sikicone from the knight v2s
the grease is just too thick
holy moly those are knights?
rip bro
unnecessarily thick for SW Knights
ohh I've seen that
just didnt know it is "plumbers" mod lol
Yeah i pressed it fully down but also when i hokd my ear close to the spacebar it seems it coles from the switch i dont know anymore
who got a jade pro and the sw knight shit
FUCK MECHTECH/BADMARK
this guy BLOWS
Yup that are knight v2 i dont know
worse sounding knights ive ever heard
im using design studio stabs totally unlubed rn
well, it works for me lmfao
😭
skill issue on their part
I dont know what to do anymore
@tropic urchin
lemme hear
the message is fine (even though people need to stop putting shit inside their stabilizers) but fuck badmark (the guy who posted that video)
Are 28g springs overkill for gaming?
?
The video is a little bit up
dogshit
tofu 60? @tropic urchin
uhh whatever works for you?
hmu w cid of spacebar
It’s not the switch, it’s just the wires that aren’t 100% flat/straight.
wtf r these nerds talking about
a bit of a bummer if you already lubed them tho
lmao, yeah. im just here for the mod because it worked for me and I only had to do it once and my spacebar and other stabs sound fine for the most part
I wasn't trying to say that,
Do u thibk i can use dialectic grease on wire with knight v2´s ? I did read ut is not such a good idea but i dont know
What’s going on
hardmount
The Jade pro bat signal is going out
tried glorious raptor and there was no issue with magnet strength or anything they just use a weird spring diameter that does not match the lekker type may be the same diameter as cherry
lighter = slower rebound = dogshit
I personally wouldn’t recommend it. It can help but there’s much less room for error than with 205 or moly
I have molykote also can i try that one ? On the wire ?
Yeah, you used moly on the wire already right?
Nope krytox 205g0
Oh
But the molykote is a bit thicker
just dont overlube the stabilizer it will make a mess and attract dust/hair if it is not so sluggish that it fails to return
ngl ive used three sets of knight
with grease
and theyre fine
light coats tho
There is plenty of 205g0 already on it
if there was a stab that only needs 205 tho itd be that
It can be fine if you use reasonable amounts
The wire was almost totally white well the little part altleast
I also used thicker grease there, xht bdz and it was good\
I’m confused, why do you want to put grease on it still? You can do it but it’s totally not needed
I mean in knights
I wanna do whatever it takes ro make it sound goid
I dont know what to do anymore tbh
personally I like a tighter stab, might try staebies some day, as you suggested once
That’s what I would do
Staebies enjoyer, yes!
paigus cost like 1 dollar bro
I mean more gpster, why does he want to put grease on it?
😭
So take out wire rebalance and add molykote ?
yea
Or 205, yes
Last i tried to balance the wire it was flat on my phone but welk lets try again i guess
Why not just use 205g0 and be safe with it since it’s your first time
you could also try flipping it
has anyone else had inconsistent switch pulling issues on two HE plate
any time i go to remove switches its horrible on 1-2 areas but then one row flys right off
just use 9 layer tape mod and be safe
I will post video when i am balancing the wire or try to
14
It can happen as well if your keycap isn’t seated all the way but you pushed it down so it really comes down to the wire.
who needs a case? just tape it
Your space bar will have some movement no matter how much you balance that wire btw
that’s just the natural movement of knight v2 in your video
movement is fine, ticking is not
flame maple keyboard 
maple would be nice
If your goal with the grease and rebalancing is to stop that small movement completely then you will not get anywhere with that just fyi @high sphinx
im rocking them lekker v1's with no movement
I just saw that video you posted before
doesnt your spacebar need to be absolutely flat too then
alot of them come with a slight warp
even expensive sets it can happen
im not even joking, shit, LMAO. that switch wobble is fixed by tape LOL
@glacial wind that’s the goal^
just dont tap like that, fixed
That’s literally just the minor movement of his stabs and totally normal
🥴
Oh so that is normal ?
Yeah there’s a difference between ticking and normal stab movement
There’s no ticking in that video
So no way to elimonate that man i thougt i was going crazy
your stab will always have a small bit of leeway
it’s not going to hold your space bar 100% movement free
Cause when i press my spacebar fully i am really happy with jow it sound but i was just when i was slightly tapping the space that it made that sound but u probably saw the video
also it makes sense to give your freshly tuned stab some time and let the lube set in, it might become better over time
@high sphinx can you press slightly deeper on both sides?
in a vid
if u don’t mind.
when i press my spacebar, my lekker v1's never fail me ❤️
I posted a video from heavier presses
Yeah basically zero issues with your stab
I think it's fine too
u have no rattle dude
Oh ok ty man sry for all this nonsense than i am still kinda new is this keyboard modding thing since i got my wooting but i appreciate the advice and help u guys provide me u guys are the best
It’s all good, gotta learn somewhere
It’s fine, from the first vid it sounded different from side to side
So the sound from the fist video is just normal movement frol the spacebar then ?
to me.
Yeah it is only while light tapping the key
by normal movement u meant, you tapping the key lightly xD
Yea that’s just normal space bar movement because your stab doesn’t hold the space bar fully tight (which is normal)
Ok i understand now ty so much
dont even touch that thing dude, it sounds pretty good
💀
def gonna sue that thang
Yeah i changed a lot just to try to eliminate that sound i changed switches to geon raw i changes stabs to knight v2 i changes keycaps i put tape in my spacebar but i was not going away no matter what i did haha but i am happy with the sound of my board
I bought this keycap set the spacebar sounded hollow so i wanted to fix that and the tape dod the job for me
how many layers of spacebar tape I need
stock stabs as well?
ya
we don’t count in layers, we count in rolls. 😼
good spacebar would help tho
I had the stich ones but since it made that noise while slightly tapping the spacebar i assumed that something was wrong with my stabs so i ch1nged them to knight v2 stabs
This keycap set was not so cheap
what set
atleast 5
It was mk grey on black from monakokeys i spent 70 euros
nice just put a spacebar onto another spacebar then
I used one layer of ductape only

buy a gmk spacebar
singular
ya
just one
just one
damn
Only for the spacebar ?
yea
lol that was synced
lmfao, damn thats sad
JINX @tawdry tree
fr tho
one gmk spacebar to just slap into a build that needs it
why not?
Is my spacebar not good ?
eh
its ok
are singular keycaps even sold?
nyope
id rather go with the clack at that point
would be interesting ngl
They’re memeing
Oh ok haha
https://typemachina.com/products/gmk-spacebars?variant=11185411333 unless u count this
For a restock notification of the Cyan/Purple color, please enter email here. For a restock notification of Beige/Black color, please enter email here. Thank you! These high quality spacebars are newly manufactured by GMK with original Cherry equipment. Thick and durable ABS are used for longevity. Different options a
dont make my guy even more crazy
wow
U guys know anything about the ghostbar ?
ya its muted
pretty much all it does
U like it or nah ?
no
@glacial wind u came just in time a little bit back to explain i was already pulling up my screwdriver set haha
yeah that was an interesting conversation to wake up to
buy gmk spacebar
Atleast i can sleep in peace now here in eu it is 3 am and i was about to open up my keyboard haha
on diddy
gmk spacebars so good
Well i huess i have to buy gmk spacebar then 😜
Yeah I have one
U like it ?
Oh i see
kbdfans are releasing cf and fr4 plates for 80he
oh cool, would be great with the new case
still no alu tho...
asked about alu too, waiting for their reply
I just removed my space bar foam, no foam gang is starting 
What if you get brushed titanium
why would you ever do something as cursed as that in the first place...
maplecase with stainless steel shine through diamond embedded legends
but the real answer is my other keeb had it and it sounded fine, but I think this foam is chalked
@calm pulsar why does this cheap amazon keycap set actually not sound bad on the frog T_T
yes
cause your build is good alrdy
Is that to me?
yes
Kk
that spacebar is naisu
never
alphas are kinda bright yeah
needs tape in each keycap for sure

what is that build
i only busted the set out because i remembered "oh wait i have a wob set" and i wanted to see what wob looks like on the frog

@calm pulsar im receiving 60a tadpoles soon for the frog
:D
hopefully this week TwT
wob is the shit
from bigsly?
ur wob better ToT
ya
nice, I got the 50a ones too from geon but it's probably not much difference
btw is that what you use for desk pad? 😮
looks comfy
.......
.........
......
....................
;d
face towel
😭
i need keebmat
T _T
😂
if it works it works
I use a razer strider and it's been fine for me, no need for separate keeb and mouse pads
and they scrapped it again prolly
which switches have the least stem wobble overall
to the point that they are almost rubbing if you press off center
hate stem wobble more than anything
ttc kom
Ttc kom rgb/pom versions
do they use the same springs as the lekkers or are they completely different
id like to get them with 100g and I have a 100g spring pack for lekkers
Are the wooting Tenkeyless wrist rest and the wootting 80he wrist rest same size?
No they are different sizes
how so
I reckon width
anyone got a side by side ?
TKL is a bit wider then the 80HE wristrest
then that is not a big problem
a bit is not alot right?
let's go
can't wait to do a new build in lx60
well if I am able to, since gummy oring doesnt work, I will try to maybe use gasket mount with the included plate
i think the biggest difference is shape
locked in mode
Me wanna
also the lucifer switch
#🔧│keyboard_modding message Jeds comparison
What is the lucifer switch?
geons new switch
cheaper than raws
Oooooooo
what
Okay I'll buy it for my venom
damnnn Im ordering this along with venom mx and other stuff I wanted
i just ordered raws now lucifers getting released
he took deng gods and updated the molds to make them better, pricing around 20 cents a switch
i dont think theyll be better than raws
but just another option
:p
full black tho
HE switches come out like hotcakes 🥞
Doesn't really matter when venom dont have rgb. For wooting, mmm, depends
yeah but I like having a full black switch on black plate, so that only keycaps can be seen basically
so it's a plus for me
@glacial wind have u gotten word or anything about lucifer switches?
apparently selling domestically first
is it box stem
anything is better than black knights
I'm going to korea in May maybe I should order some goodies to my friends place and take them back for free shipping 
should be

Wanna know the material
its sillicone
deng gods are okay for their cost
i assume better ones that works out the kinks would play nicely
also
sub 15 dollars to fill a 60%
geon wins again
did i buy raws at a overprice?
why
fine
they're not super interesting. Geon said they're basically a budget switch not as good as raw he but meant to fill a gap for people who want a super cheap basic switch
ya thats a given
i meant like compared to deng gods
are they tastier
?
come on geon you can do it
pave the way, put your back into it
and how much more so
does anyone know a pudding cap with dark base white/gray top ?
kinda like black translucentish base
cherry profile
he just has the lucifer listed as in production/new arrival right now but no sales date yet

👀
i'll probably order a set when it's out since it'll be dirt cheap with geons typical first sale discount
just to have on hand for the mod site
yeah and who knows what the frankenswitching possibilities might be with these new geon adjusted molds

:0
@glacial wind what were raws a retool of
i forgor
it'll probably be like $10-15 for a full set with the 30% discount he always throws in for first release
ya
raws were his own from scratch basically
anyone know discount codes for wrist rests?
i see they're finally repushing out the venom zero deadzone stuff to their beta software
i am also looking to upgrade my mice
currently using a rival 600
i use a claw grip
and i got big hands

when hopping from venom back to wooting I noticed the rapid trigger is not as fast when spamming movement in wow
not that it matters in this game, but still a noticeable change
yeah unless you're on the higher stability switches you'll be getting +0.15-0.18 more deadzone on the same setting or +0.2-0.25 more if you were using 0.1rt on venom vs 0.15 on wooting
basically doubling your base rt sens if not on ttc kom or similar
ah so basically I'd need ttc kom on wooting to achieve similar results as on venom with other switches?
yep. Since wooting just auto adjusts the deadzone based on the switch, you basically have to use the most stable switch to get the deadzone down that low
thanks for explanation
I can kinda see the value of ttc switches now, but not sure of their feeling and sound, and also I am gaming just fine on with my frankenswitch that has geon raw stem in it
yeah realistically it doesn't matter much unless you absolutely need that less deadzone and ttc switches need to be hand lubed to reach max smoothness since they don't come factory lubed
oh wow, didnt know that
for dollar per switch you'd think they would factory lube them 😄
Why do the jade pros feel and sound literally so much better than regular jades? What makes them different cuz it’s almost night and day
tolerances and spring
one is tighter (the pros). You don't feel the wobble as much because there's less wobble to feel
Anyone know of a way to ground the 60he+ module in the tofu 60 acrylic case with the friction fit pad?
By plugging in usb cable, the outer shell of the usb connector should connect to ground
faster on venom?
yea
ok sold
yeah i need KoM's
then i need 60he+ pro max v2.0
🤓
are their springs light?
it feels heavier than it is due to having the tallest springs out of all the switches
any ides of key caps that help show the layers for the 60% key board?? EX. f1 f2
They’re all roughly in that 50-55 bottom out range, similar to jades but with a longer spring
Well not really that’s light lol
Eh I guess in gamer terms for low spring users
yeah i'm ultralight err'thang
any ides of key caps that help show the layers for the 60% key board?? EX. f1 f2
You could spring swap if you really hated that
well but that's part of the whole attraction is having a nice long spring lol
yeah idk i'm just conflicted
any ides of key caps that help show the layers for the 60% key board?? EX. f1 f2
Guys, I am thinking of getting the Ttc magneto pom's or the geon raw he switch
Which one is better in terms of feel (smoothness and stability)
Personally I don't particularly care about sound because I use headphones
poms are superior, but almost double the price
Hey everyone! Since the Wooting 80HE is finally in people's hands, I thought it would be helpful to showcase a sound test of some of the most popular Hall Effect switches so you can find the perfect match for your preferred sound and feel!
In this video, we’ll be testing:
Lekker Switches (V2)
Black Knight Switches
TTC King of Magnetic Switch
G...
the guy in this video says the geon raw's have the least wobble
in the description
thanks,
can i get the link to the video please
looks like gaterons jade pros are also pretty good
Huh someone else said the magneto’s beat them
oop didn’t see the image below
✨ 눈쟁이 X MCHOSE 구독자 증정 이벤트! ✨
✅참여 기간 : 12/12(목) ~ 12/19(목) PM11:59까지
✅댓글로 디스코드 아이디 입력
✅눈쟁이 디스코드 이벤트 채널에 입장한다!
✅디스코드 채널에 올라와 있는 메시지에 지정된 이모지로 반응한다!
✅참여 완료 ! ( 이벤트 기간동안 꼭 반응 상태를 유지해주셔야 해요 )
✅디스코드 링크 : https://discord.gg/eyejoker
서버 접속 후 " ︱🎶︱이벤트 " 채널로 이동하여 이벤트 참여하시면 됩니다.
───────────────
⬇️⬇️ 이벤트 제품 구매하기 ⬇️⬇️
https://url.eyejoker.com/AC...
imagine still not having made jade knights shaking my smh
The only place to get the rubber stand off covers was with the optimum edition right?
The ones in the friction fit vid

Anyone got both the Optimum and 80he raw?
Stabilizer issue
How different are the two colours?
Yeah I think I just noticed that rn
It’s the right one
yeah both. They are nothing alike
raw is a bright silvery color, optimum is more of a darker grey coated metal color
Okay thanks. I love my Optimum and am thinking about buying 80he raw too
Do you have a photo?
keep in mind raw is nothing like the optimum finish
raw is not smooth even coat or anything like that. Lots of marks on it, bright silver
you can see the machine/flow marks on the case
closed bottom
wooting did say they're working on another limited edition raw too, which might be more up your alley if you want a 'cleaner' raw case
Oh wow, yeah thanks I can see that
I was thinking of copying this actually: https://www.reddit.com/r/WootingKB/comments/1hk0xz5/metal_erywhere_wooting_80he_gateron_jades_w_aluve/
personally i'm going to cerakote my raw case down the line probably
sand it then give it a tungsten cerakote i think will look really nice
Yeah I knew it was less clean, but it looks a bit too raw for my liking
Where did they mention the new raw?
That does look really nice
just on livestream in random qna time
Reminds me of the optimum finish lol
so if you want the cleaner raw i'd wait for calder's limited edition raw down the line
rabbit0 selling the mm m6lite soon, 12k scan, 20~30k on WASD
ooo
not cheap, 210 usd for the set
cheap
not overpriced
little less than the module
mmm, venom with rgb
the m6 scored the highest on nearly all tests
both latency and deadzone
pretty promising
64%, south facing LEDs
Hey I am looking on buying the module 80HE since it ships faster. Since I will be going this route I have been looking for the quietest switches. Any one has any info on the GAMAKAY Phoenix switch?
They’re the quietest but not very clean.
Does it affect performance?
and what do you mean by "not very clean" as in the sound right?
Not latency if that’s what you mean. You can still use 0.15 RT but they aren’t yet optimally compatible (you can only set your actuation point to 3.7mm or so, instead of 4mm).
Yes, the sound isn’t great. It’s quiet but a bit scratchy.
Wish they had a sound test on these 🥲... What would you recommend as far as both performance and the quietest switch? I've also read about the Black knight switches but haven’t researched enough
Black Knights aren’t available anymore on Ali, so they’ll probably be more expensive to get than Lekker V2s and sound similar.
For quiet, all we have are the Phoenixes.
You can mod TTC KoMs to make them more quiet, if you and your wallet are up for it. 😄
Would getting phoenixes switches and lekker l45's for AWSD be a good idea? Modding a switch sounds a bit scary for my first ever build
Apparently, Only PCBA sales will start in January 2025.
btw idk much about switches but do I still get RGB on these on my 80he even if it doesn't look as good
you do
ayo you're the ttc dude xD. Do you have a screenshot of what you 80he looks like with them on
also would it matter if I got them on my zinc 80he and will they be fine with the stock nordic keycaps
You could get Lekker V2s with the Module for cheap. Try them out, see how you like them and if they’re too loud you can try Phoenixes.
That’s fine.
not the same casing as me but they still look plenty bright I think
might end up grabbing them in that case xd
They have a light window/diffuser.
is the part the light goes through called a window/diffuser
Yeah!
in that case I'll also get good light on my keycaps, so that's cool
this is the case? Clear black looks so good 😮💨
yeah that's my ghost case
Firee thx
i have the raw zinc too, but i think ghost looks better with retro keycaps
ye on the image it kinda looked like a covered purple plastic but I guess it's just the shadow
Yeah haha, it’s transparent.
also it says the total travel is 3.4mm, will that affect me if I'm on 0.1mm actuation
Nope
or is it more so that I can't put it farther than 3.4mm to say 3.8
You can
The slider in Wootility shows as millimeters but it’s %
think of 0-4mm in wootlility as a percentage 0-100% instead
So you if you set it to 4mm, it’ll be at bottom out.
we're waiting for switch selector so it updates the numbers on the side, but for now you can just pretend it's 0-100% on the side and ignore that it says 4mm
okie
next major wooting update will be nice actually. Switch selector and 0.1 rt at last
how would you say it feels to press compared to the l45 v2
o what's the implication of this
you notice the hair trigger more since you're getting rid of a lot of deadzone
just means rt will be able to be set more sensitive and any autocalibration will be quicker if you use a switch that's in the switch selector
so will it have like a list of known switches to support it and you can automatically select which one you have
yeah exactly
that's cool
it'd have the most used switches, then you select your switch from the list
then it can update the side numbers in wootility to say 3.4mm instead of 4mm for ttc rgb/pom
oo
btw if I get them do I get to get some sort of lube for them as well. I'll be ordering the blank toolkit if relevant but I've never done any modding before
Lekkers v2 vs HE raw vs Jade gaming Which one is the quietest out of all three?
it's up to you, but personally i think they perform best with a lube job
ttc does not factory lube them