#🔌│tech
1 messages · Page 646 of 1
Yeah.
even more cores and even higher boost clocks
It's weird how hard it is to source them from reputable sources.
Double the memory channels!
iirc there was one LTT video of them demoing a 9995WX with a 2000W power limit
it was insane shit
the cpu peaked at 1900W which is absolutely insane
I just want make -j -l 384.
LOL REAL
Supernova in your room 
That's half of my car.
fancy car
30K is cheap.
most impressive thing is the cooling needed for those cpus
why is someone auctioning off a 9995WX, LMAO
they should just sell it to a company, these are so hard to come by
like a big company would gladly pay like 40k for that cpu
its not meant for consumers thats why
if you want to order these you need to do it via a B2B vendor
also they expect you to buy a fully assembled system with 9995WX, not individual CPUs LMAO
I hope I can get a better paying job next year.
amd doesnt want you to have them beacuse the market it almost dead and they dont want to bother
But like, if it was dead they wouldn't sell and they wouldn't make them.
they are making them beacuse its just chiplet reuse and existing contracts
also its gives you free PR
What's the highest end one they let me buy, only the one Microcenter sells?
lenovo is >50% marketshare for threadripper sales and they only sold like 30k worldwide
I mean, it's not going to be high volume in the first place.
30K sounds like a success.
yeah dont they use the same CCDs across almost all their current gen desktop CPUs?
oh yeah, Epyc processors use them too
its very different from Intel
Intel still sticking with the monolithic die or tiled design
uh, either its monolithic or tiled it cant be both at once lol
meant to say 'or' yeah, 'and' is not a very good word LMAO
the only monolithic intel chips are low end mobile ones
just like amd
they just dont use the same tiles for server and desktop
yeah, like their celerons and duos
I see
makes sense
allows them to take advantage of multiple fabs too
like they can make their compute core silicon at intel foundry and the I/O silicon at TSMC, etc.
yeah, their little cores are pretty good
Intel 18A might change that because they have better efficiency gains when it comes to power delivery. more specifically backside power
AVX 512?
backside power matters for big things like gpu it doesnt matter for low power or idle
yes next gen intel will finally have avx512 back on consumer again
Part of me wants to play Minecraft with software renderer on a TR.
Cool.
That's annoying.
why did they get rid of it? was it beause of the little big architecture of alder lake?
pretty much
makes sense
because iirc if you wanted to get AVX512 on alder lake you needed to disable all e-cores
Maybe I can do some LFS stuff when I get home today.
I still want to successfully bootstrap GCC so I can have a hypothetically validated compiler chain.

🤔 Should I install this?! I already have the AMD drivers from the AMD software and they are up to date....
No
it put the stupid pending update icon into my taskbar .-. ffs
theres no way you're thinking about updates constantly
either always wait or just do them
I got a notification that there were updates ready to apply, so I go check and its this AMD update....
and its got the damn yellow icon in my taskbar .-.
so no, i dont think about them until Windows sends a notifications or just randomly reboots to apply them
then just decide on either one
I usually skip the windows feature updates and only update on patch Tuesdays
disable them if you dont want them or just apply them whenever they appear
I was asking if I even should apply this one cause its the driver...and seems to be an old version too
if you are sure you already have the latest drivers, I wouldnt bother
According to the AMD software, they are up to date
then dont bother yeah
Chipset probably
Version number looks like it
@tribal dirge
damn dashi being slower than youtube shorts 
lmaooooo
hush
I'm gonna fucking
Put a plastic bottle in the trash instead of the recycling bin
youve been warned
maybe kingston would have the means to tool up for ram production, probably wont though
I doubt it, Storage and Dram are very very different
i am going to make ram
openai pls contact and buy it with imaginary money
heck I dont think Kingston even makes their own NAND chips
they buy NAND flash from other manufacturers of NAND chips like Kioxia
can pick this up for €230 new from dell atm
havent used firefox since 2012
it changed so much
(good changes)
lowkey conflicted between using firefox or brave now as main browser

Is Brave Chrome based?
no its chromium based
That's an easy choice, Firefox. STOP GIVING THE MATERSHARE TO GOOGLE
Would that not be more developed choice, since Firefox does have open source components?
we dont have that
oh
idk what a wooding 68he even is
its like 30 to 40 dollers on amazon'
Wooting Two is peak.
is it
i cant even find it
Same.
type wodding 60he keybord then scrol down and you will find it
its actually 45 bucks
first you say wooding 68he now wodding 60he
Noone couldve seen that coming!
What's with people using "noone" instead of "no one"?
saves space
whats your opinion on the two browser tony
sorry for ping
using zen personally which is firefox based
the only place i use chrome/chromium is my phone cause its preincluded in android
i see ty for your wisdom tony 
I see what you did there but it's harder to read.
ive been a firefox user for ages until arc (chromium based) did tabs in a way i really like but then did it shit once they went outside mac only (and then stopped updating it beyond chromium updates) and then zen popped up and its basically arc for my beloved firefox
I've been using Firefox since they added extensions to mobile.
when was that?
i stopped using them back in 2012
but man definitely changed since then for the better 🙂↕️
I dunno, like when I was in highschool or something crazy like that?
To spell this out clearly, the reason RAM has quadrupled in price is that a huge quantity of RAM that hasn't been produced yet has been bought with money that doesn't exist to populate GPUs that also haven't been produced to go in datacenters that haven't been built powered by infrastructure that may never exist to meet a demand that doesn't exist at all to make profit margins that mathematically can't exist while economists talk about this thing they call the "rational markets hypothesis".
2641
2754
no thats not quite right
the future ram supplies being bought by open ai is something that accelerated the panic and people then rushed to by more
its similar to covid toilet paper prices
The demand also kind of exists
yesn't the demand exists because people rushed to grab even more
demand was up, then people paniced, bought more than they need and that spiraled
Yea i mean it allows for larger LLM models
the demand was real but it isn't that big and didnt cause it on its own
Which is the easiest way to make them "better"
This isn't normal behavior.
no but it is normal that panic buying makes a slight undersupply worse
Oh really
It's awesome that you can't make them more up to date because of all of the generated crap that you'd scrape which would destroy the new models.
how long ago was that
👀
Over a decade I think? Not sure what year I graduated I just wanted to get past that.
Oh dang, the 10 series and older just got dropped?
yeah few months back
News to me.
is there a way to revert the beta?\
hello guys
i updated my wooting to the latest version and it doesnt turn on now it doesnt have rgb its not functional
what can i do
it doesnt work it feels like i tried everything
how do i do it
is it detected in wootility?
press initialise
The purpose of this article is to help you with the factory reset, restore and recover process to solve any issues with settings, actuation or connection issues
ye but it says plug it in but i did its not detecting it
sorry about the delay, wifi isn’t the best over here
i found the setting but it doesnt allow me to reset it
ig it thinks that i alr did it
@maiden steppe did you try this?
im guessing that’s what you’re trying and it wont let you reset it
yes i watched the video
idk
oh
thats what i did
is the v2 really THAT different from the normal 60he that it is worth buying?
yea but idk if i want to wait a month and spend an extra 100 dollars
if you have the normal 60he and u dont have money out the wazoo then id stick with the 60he
i dont
but i rlly like the v2 so idk
Does the 60HE v2 module come with a usb or do I have to buy one separately
id say the only reason someone should upgrade from the v1 to v2, is if you REALLY want that split space bar
and then you reap all the other benefits too
ur not getting a whole new experience so i’d say no
A
Hi
What’s the best keyboard kit for modding with the keycap remover and switch remover or is the wooting one the best
are there specific keycaps for the wooting 60he
dunno about best, but this one is nice
I ordered it 
I hope I like it lol
If not I’ll return it in time for the S26U
Same phone for 5 generations 
what is it?
Onepoop
I'm actually super impressed by these headphones but man the design is stupid for the case.
No cover at all
Too distracted by those nightmare feul nails
You can get a separate case to cover it
OnePlus 15
Fancy
no purple??!!
Nu I like how the black one looks 
I see... xd fair
Just saw a video of it looks pretty
yeh 😍 I want
Disgusting design
I love the cyclops camera modules 
Money
Why the stem so damn bulky and long?
any good IEMs for gaming and music?
Better ask in #🌐│pc_gear but you can start with 7hz zero 2.
If you have extra budget (like $300), you can go for kiwi ears astral
Alright thanks
Because full touch functions etc
And the anc/pass through is on them
It's a standard packaging for kickstarters and such.
I have several of these tins with USB sticks with a game or music.
interesting that the dawn 2 pro comes in a tin
not even my JDS Labs Element IV came in a tin LMAO
lolz
Medication
I am curious to see how warm they get
I have a prescription
I haven't tested it yet
drugs are good mmmmkay
Been vibing with my anibuds
ah
US?
Ah, I thought schedule III was less restrictive than it is but you still need prescriptions (federally).
mine are worse
Oh this is the dac I wanted to get
Unfortunately I can't test it as I've lost my 6.5mm adapter
Oh wait nvm
It has two audio outputs
Forgot
Given it doesn't have 6.5 that's not a problem 
Big holes.
i love web apps
4.4mm fite me
I don't understand the problem with 3.5mm.
Smaller, therefore worse 
For real though, usually DACs pump more power through 4.4s 
Oh the balanced output?
Yeah, usually balanced headphones require more power
So that makes sense
mep
it's a side effect of the fact that DAC ICs are cheap and way easier to control in mono mode
So just slap 2 of these, for 3.5 reduce power and connect grounds together, done 
But why? It's not like there is going to be that much loss?
I dunno 
Check any small DAC, be it Moondrop, FiiO or whatever and they pump like almost twice the power through 4.4 
hey snowy calsy
what dac & amp should i get for my moondrop blessing 3s

idk if i even need an amp im new to all of this
What do you have now?
Just a motherboard output?
same
right now i just use my motherboard output
do you recommend getting a dac?
Anything will be better than your motherboard output lmao
If you don't need crazy amounts of power, the Apple dongle is good enough
fair
im using hyper x mic and hd560s headphones
i might get a new mic tbh
i want to get a dac but idk if i need one
You'd probably want something with a bit more power though and with a mic pass through feature.
Ye
do i have to pay a good price for one?
why mic passthrough
or theres some decent options out there
He wants to also use it with his HyperX headset
he only said he had a mic, assume it's just the hyperx usb mic
hey ducky
Ouhhhhhh
should i get the benchmark dac3 hgc
it is usb yeah
monitoring is kinda nice if you're talking a lot in closed backs but I never use it with open backs
Well in that case, you can probably get away with a Crinear Protocol Max
Has plenty of power to drive headphones on the boost mode
whats your guys thought on this mic? People say they have a hard time hearing me on my hyper x
Tbh you might be able to get away with the apple dongle because blessing 3 really doesn't need much power to drive.
I'd check your settings first.
Yeah, usually windows sets your mic gain to 0db
i did
Usually I've had to add like a +10db gain in most cases
ok but like
should i get the benchmark dac3 hgc

If you have money to burn, sure
They're nice DACs
No

For me personally I wouldn't go beyond something like a JDS Labs Element IV for a DAC/AMP combo for the things that I do.
I wanted their HPA4 for a long time but it's completely pointless to buy now unless you just want a nice looking well-engineered product
Which is why I said if you have money to burn
bankai asked to borrow 62k cad for a dac 
can confirm i asked to borrow 62,000 cad for a dac

idk who you thought i was 
Biggest problem I have with the design is the now outdated display
If this released in 2026 ($3k+) I'd want a higher resolution better screen
That's more than a good enough display tbh
valid
I'd rather them spend the money on good quality components than a fancy screen LMAO
if you're putting a screen on something that expensive you could at least make it good
probably won't mean they're forced to make the rest of the components worse
It's better than screens on DACs that cost 3x as much LMAO
Heck some have no screen at all!
Chord Dave has the worst screen I have seen
And it costs $15 000 or something silly
and they should do better too
Or is it because the screens don't really matter that much? 
Look at how the edges cut off
I haven't seen any audio engineer really complain about the screens on their DACs of all things
Now that's just bad design LMAO
snore can i borrow 5100 usd
$15 000
n o
LMAO
id rather use that 5.1k on a car import fee 
I'd use that money to invest in index funds. Lmao

jdms are investments fr 
Never treat anything that depreciates over time as an investment, big mistake

have you seen the price of old jdms 
theyre worth more than a brand new car (40k+) 
Those are the ones that are kept in good condition or have been restored, ones that are beat up don't sell well
Cars 100% depreciate over time and require periodic expenses to maintain their value
i wonder how much this person would sell it for 
beri clean car
Probably costed quite a bit of money to hire a detailer to keep it that clean
Ohno and it looks modded
Even worse resale value smh
Modded cars are super problematic
i mean if youre this into cars id imagine people find joy in detailing their own cars
this i agree with
True
though if its fbo and they revert it back to stock then its probably fine
same goes for the bodykit
Yeah, but all that is gonna cost money
Did you guys know that caller ID is basically a modem signal?
its a thing i think most people consider or should, if they eventually are gonna sell their car, its best to have it’s stock parts laying around
the only thing that would point it out is that pink engine tub

I'd rather give the traction battery back so I could get the core charge.
Body kits are ugly.
I don't understand why people want fat cars...
that car i sent has a kit, its not widebodyed
not every bodykit is a widebody
You can hardly see the car in that picture.
some only does front bumper, skirts, rear
I do wonder if it would be worth getting wider rear tires and pushing the wheels further in to keep the stock look, assuming you can deliver 400+HP to the rear.
its a nissan 180sx (s13) 
I meant for my eventual project car.
I want to shove as much electric power into a Corolla/similar as I can fit.
i mean theres only so big of a wheel you can put on a car before you get poke
or it rubbing
I meant like wider not thicker

yes.. that is what im talking about too, depending on how deep your wheel well is
determines how shallow you can your spokes and how big the outer rim can be
You can cut into that no?
I can't think of very many reasons why you wouldn't.
Other than more tire = less range.
well i mean cutting the back of wheel wells just goes into the interior (in some cars) and then theres also just the subframe on most
Wooting Lekker Tikken Switches / Switchy Heist / 20 pack --- what is the difference from preinstalled switches? Stronger spring?
yes
100g vs normal 55g
yes
HMDs marketing is so fun... And the colors of the phones is really pretty
This one has a really subtle pink
interesting
i did not know
is that a mx5
180sx
yeah what jabber said, 180sx (s13)

I mean, it's not about the outside, it's about the inside
I'd sharpie oover it ngl
id spray paint it
or just get a case where you cant see internals
or get smth custom made
sad thing is that whoever receives this card is just gonna continue playing fortnite and play nothing else at all or just sell it
yep
i mean tbf it would be worth smth coz they dont sell that generally
id sell it to buy smth better
I just dont understand why they do these give aways
people always think they'll be the 0.001% chance of winning
gets them more players
does wooting work on steamdeck?
interesting
It should. Might need a powered hub.
100000 people in a giveaway 
is the rk61 gud
Win it only to sell it and buy a normal one 💀
anyone know some good arm sleeves
i use the Es one from pulsar
procision arm sleeve
anyone know a lot ab monitors?
What kind of monitors?
OLEDs or LCDs?
I know a lot about current and last gen oleds 
@sullen bear oleds, basically here is my dillema hold on
this is from something I posted in a diff server
Hey, I’ve been really indecisive. I don’t play FPS games super competitively anymore, but still play them from time to time. I mainly play fighting games, random steam games I find, Minecraft, and Roblox. I have occasional phases where I aim train, play ranked games, etc. but not too often. I know the image will be blurrier on 1080p on a 32 in display but im wondering, is it worth the tradeoff for being able to switch between 4k and 1080p seamlessly as opposed to just going for something like the MAG 272QP from MSI (1440p 500hz), or the ASUS one at 480hz?
Mainly, I wanted to try 4K since I’ve been using a terrible image quality Zowie monitor for years, but I also didn’t want to compromise on performance which is why the dual mode seemed enticing to me.
It’s also used by techless and optimum so I think it would be unlikely to be a bad option.
However, I’m conflicted because I’ve heard from some it’s very blurry when on 1080p and they would rather just get a 1440p 480-500hz, others say they love it and the convenience of having a simple button to switch. Another point is, I’m unsure if buying the LG today will be a wise decision since it was released over a year ago. Are there any better options coming out soon or available now? Should I just pull the trigger? What do you guys think? I haven’t upgraded in so long so money isn’t too big of an issue, because I’m aware the price is insane for the LG.
Specs: My specs, once I upgrade my GPU would be a 7800x3d paired with a 5080, and a 1000w psu. Currently using a 2080 ti, but definitely getting rid of it soon.
TL;DR LG 32GS95UE, MAG 272QP, or a different option
I see
Basically a 4k 240hz/1080p 480hz dual mode lg monitor
vs a 1440p 500hz monitor 27in from MSI
the current gen LG dual modes are really nice, if you want 32 inches, go for the LG or equivalent panel, if you want 27 inches, go for that one.
It shouldnt be blurry from 4k to 1080p, it scales down and you just have some black borders
yeah you can choose how the 1080p mode is displayed
Yea if u do 1080p without black borders itll be blurry
idk I heard there was some issues with it the dual mode monitor I’m
Talking ab is the one that optimumtech uses
it wont be blurry, just a really low pixel density
is the difference between 1440p and 4k that noticeable?
Yeah blurry or low ppi idk man, same same for me
it will be noticable yes
4k will be a big step up from 1440p
Yes but i think the hz is more noticeable
hmm ye im not sure ab the inches mainly i would get the 4K dual mode if the 1080p wouldn’t be too blurry or low pixel density ykwim
I have a 1440p monitor now but not OLED I don’t think
if the bro is only playing competitive titles occassionally, I think the 4k resolution will be more impactful
ur prob right cuz rn im playing
factorio and Minecraft
being able to switch between would be better
but at the same time I do play competitive fighting games, the 500hz wouldnt be that much better in that regard right?
also OLED fringing is much less noticable at 4k than 1440p
in my opinion at least, super high refresh rates is really only beneficial in competitive FPS
not sure about fighting games
gotcha so overall since I mainly play games like mc with shaders 4k would be better right
then just switch to 1080p for fps
its perfectly fine to me at least
I have a dual res WOLED, and it looks perfectly fine
Most fighting games are hard capped to 60
Honestly with his usecase i wouldnt go for either
ok yeah then 500Hz will not matter LMAO
wait really?
how many inches is ur monitor
32
what would u recommend
wow do u have the LG?
it's a Asus PG32UCDP, but they're the same LG panel
yes, at 27 inches 1440p looks fine
not as clear as 4k 32 inches though
I would prefer the 4k at 32 inches personally
u play comp fps at all?
I do play competitive fps sometimes like every once in a while
some CS and whatnot yeah
the 1080p mode is just fine for a title like CS
gotcha I’m assuming that’s less of an issue because of the resolution ur usually playing at in cs
tbh with u then
I think I’m going for the dual mode
thank u this has been such a hard decision ☠️
I’ve been stuck on a 240hz zowie monitor with terrible colors for years
One of the new woled tandem panels
yeah, one thing to note with 32 inch monitors is that you do need to sit a little farther away from them than say a 27 inch monitor
Its cheap, high ppi, decent refresh rate
heard about these but the refresh rates are lower right?
they are not cheap lmao
280+
I use a 240 rn prob not yet cuz I wanted to try the higher refresh
optimum said it is pretty noticeable
heard ab this as well
thank u sm guys
ducky do u think the jump in refresh is noticeable?
480€ compared to 4k 3rd gen panels which are at 800+ rn?
oh I wasd looking at the 540Hz one
that costs 1100 dollars
they have a low refresh tandem oled?
280hz
280Hz high key is not it for super sweaty FPS titles
but if you arent like super high rank, I dont think 280Hz will be too bad
is the 540hz problematic at all? Aren’t tandem oleds pretty new
540Hz panel is a bit pricey
but very good
yeah that’s true but the lg one i think is
1300 or something anyways
wanna weigh my options fully
is tandem oled a better image quality
60 is not enough for super sweaty FPS
280 is more than enough
same image quality but gets brighter than normal OLEDs
thtas the main benefit of tandem oled
gotcha but from what you’ve heard of my use case
prob just the dual mode right
if you want 4k 32 icnhes, go for it, if you want 1440p 27 inches, no reason why not to go with the tandem oled one
I’m ab to flip a coin or something 😭
what’s the name of the 1440p tandem oled one?
Mo27q28g
its very situational, tbh its really down to what size you want, theyre entirely different sizes
Is the cheapest one
Asus rog is releasing a glossy tandem woled but it has bad reviews for 600
tbh
prob just dual mode or the 500hz one cuz
optimum has been using the lg as his main for a year
says there’s been no issues
plus i use a file manager
you have a competent PC to run that full 500Hz?
Tile**
thats another thing to consider
so a bigger screen would prob be a +
When i upgrade my gpu it’ll be 7800x3d with a 5080
very nice
that’s good enough for some titles right?
that should be fine
i usually crank settings to low anyways
medium even!
ngl dude just decide for me atp 😭😭
Btw almost all the panels are the same
Its software solution generally
ye i mean the convenience of 4k to 480 rlly sounds nice ngl
also panel calibration
why bother with rendering graphics when you can render the game in ascii and gain even faster framerates
it is very nice I will say
have you ever owned a 32 inch display before? or you mainly stick with 24 or 27 inch displays?
literally never which is why I’m clueless, I’ve only ever used a 240hz xl2546 from zowie
and a 1440p 27in
From dell
the 27 inch 1440p fast OLEDs wont be super different from your dell except well, its fast and its an oled, you can pretty much drop that in almost.
gotcha so if i want a real noticeable change then do the dual mode right
I don’t mind spending the money since I’ll have it for years
that will make the biggest difference (literally) since its bigger (32 inches) and higher resolution.
bet cuz sometimes when I’m playing chill games I’ve realized I just want it to look great ykwim
is the picture really really nice
But why oled, you play minecraft and roblox, and sometimes comp games at not high level?
4k 32 inches will be a more immerssive experience than the 27 inch OLEDs
nah I play fps and aim trainers whenever I get into those phases
I dont think oled 4k is even the monitor you should want or need
like sweaty ykwim
simply because its bigger
any issues with alt tabbing?
hmm idk I don’t want an ips again
I mean, its just like any other display
bet
I’m js going with that I think
since the 1440p 500hz oled prob won’t be a lot different than my dell in terms of visuals
I really like my 32", wouldn't want to go back to anything smaller again
u have the same one?
same, I love the larger size of 32 inch
the dual mode
nope I have a 1440p VA one
you will get OLED motion clarity and colors, but as far as resolution and pixel density though it will look the same as the dell
I hate it and I return it
yeah so not too big of a difference
Im js gonna get the 4k
yeah
I have a 2080 ti rn with my 7800x3d do u think i need to upgrade the gpu before i even try the monitor
I’m getting a 5080 regardless
not sure what brand to go with tho
you will want a GPU upgrade if you want to take full advantage of the 4k 240Hz of the monitor in modern games like BF6 and Arc Raiders
for sure but I can get the monitor first and it might run certain games at 4k 60hz fine right?
Just while I wait to upgrade my gpu
yeah obv
bet bet
maybe not 60Hz but more like 120Hz
gotcha that’s fine then
any idea on gpu brands?
I have an evga right now but I think they dont produce
I heard gigabyte was bad
the 50 series FE cards are surprisingly good if you can find one
idk what else
Asus makes good GPUs
what is an FE card
I haven’t upgraded in years
Founders Edition card
no, they have the lowest MSRP LOL
4K would be nice but I don't really have the gpu for running games at a sufficient quality/framerate in that res
I’ll check it out
I am not, 50 series FE cards are unironically cheaper than other brands
gotcha, I hope 4K will be worth it I think for my use case it will
I have an FE 5090 that I got for 2k at microcenter
Are they the best performance wise?
they are what you should expect from that class of card, they run stock power limits and stock clock speeds
Might give my microcenter a call
FE just means its nvidias own range of cards
tbh I built my pc but I might just have them do it cause I need to do more than just install the gpu
my cpu cooler is an nh-d15
it’s pressing against my 2080 ti
so I need to get a smaller one
thats a perfectly fine cooler
ik it’s super big tho
ok thats a bit of an issue
you can only get them in the US afaik
I’ll need to get some new thermal paste
ANYWAY
thank u guys sm for all ur help genuinely have a great new years
sorry final question, how many gb should I get for my gpu?
32 or 16
prob 32 then is safer
do you mean vram on your gpu?
holy 32 is so expensive
they dont really have options there
yes
you want at least 16gb of video memory for 4K
32 is just extra
do u have 16 and its fine?
no gpu that has 32gb is available as 16gb
I have a 5090 so I have 32
you want to look at gpu power first not vram first
wait ur right it was a 5090
read it wrong ☠️
yeah, but like I said, the 5080 that you were considering is more than good enough for 4K
star citizen actually uses all your vram?
gotcha, on the asus 5080 I’m looking at it says DisplayPort 2.1 but the lg doesn’t have 2.1 is that an issue
i've gotten Arc Raiders to use nearly 27gb of Vram on my 5090 LMAO
I’m assuming they have the other one u can use too I think 1.4 or something
can’t remember
no, its fine
it'll cpu bottleneck on most systems before it manages to fully utilize the gpu kek
usually displayport versions are backwards compatible
you will not have issues connecting a DP 2.1 interface witha DP1.4 interface
ASUS NVIDIA GeForce RTX 5080 TUF Gaming Overclocked Triple Fan 16GB GDDR7 PCIe 5.0 Graphics Card getting this
they are usually forwards compatible as well
I think
Asus TUF cards are perfectly fine, as long as it fits it will be just fine
bet should fit as soon as I get a smaller cpu cooler
can’t believe how big the nh-d15 is 😭
personally I wish there were more 32" monitors with 1440p res
I think the next gen OLEDs releasing in 2026 or 2027 will have a dual mode 5k and 1440p mode
yep they’re ips tho
maybe even tandem too!
I thought
nono, like in the future
Need those 1000nit sdr 100% image screens 
iPad Pro much LMAO
that would be pretty neat but it'll be pricy as heck with decent refresh rate 
iPad Pro is unironically the best display I have in the house
Definitely need an ipad pro monitor
Absolute max settings in that hippy village?
it can go to 1000 nits in SDR its kind of insane
REAL
iirc the new macbooks coming in 2026 are going to get the same tandem OLEDs that the iPads got
Just get the cheapest one ngl
or just get the one thats in stock lmao
Wish i could have a miku 5090
why not get the ROG Astral 5090 and then wrap it yourself?
Cause im both broke currently and not familiar with wrapping lol
lollllll
Paying for that g5 tv was worth it but my wallet hasnt recovered just yet
It’s a 5080 no?
Yeah there’s a 5080 version
For 5090 price 
need more mini-led options for monitors
Also true
nah, MicroLED is the future!
Idk they are way too expensive for what they offer
or RGB LED
I don't dare to daily an oled monitor yet
too scawed of burn in?
They have like 3 years warranty nowadays lol
I'm quite adept at causing burn-ins on various screens historically lmao
I have burn in on my iphone 13 pro which is only noticeable in pitch dark at lowest brightness so i think it’ll be fine
I like running my monitors bright, and also leaving static imagery on there for long periods 
I hope i never claim this power
mines survived with no visible burns so far probably because I've been paranoid enough to set display dimming/shutoff to a really short time 
stupidity 
check in pitch dark at lowest brightness with the static elements such as battery and your button thing?
Real
but yea I use high brightness a lot in bright environments
Same
But I do use pixel shifting and pixel refresh
So it's not a huge issue
with a phone I feel like I can adapt my usage behaviour to avoid it a bit easier than on my pc
also helps that AMOLEDs used on phones are generally better than QD-OLEDs or WOLEDs when it comes to burn-in
which is why we can have always-on displays on AMOLEDs
I’ve had my eye on an iPad Pro for a while now 👀
Might just hold out for the MacBook Pro redesign.
if you want a good tablet, get the iPad!!!
i tried to find the next best option, mini led or qled but theres not much out there
I already have a regular iPad, just want that juicy OLED screen.
would probably take a while for some average consumer prices
yeah
qled qdle micro whatever, will be quite a while away and we dont know which one will actually be the one that is cheap enough to replace oled
Let me just jump into this conversation without prior context. Isn't tandem OLED a plenty good solution for the time being?
can make out the entire keyboard burnt in on the screen of my assmung note 8 
Tandem OLED is REALLY good at addressing many existing issues from both normal WOLED and QD-OLEDs, mainly improved brightness and reduced risks of burn-ins(massively at that).
And then there's also the upcoming RGB Mini-LED panels
its not a solution thats elimiates burn in entirely
True but I think rather than waiting for micro-LED, tandem OLED is plenty good and is worth it at current times
I mean if there's a 34 inch 3440X1440 tandem OLED coming, I might just splurge and buy that
Otherwise Mini-LED is also good enough for me
Btw, can I know if there's a realistic time frame for wooting 80HE refresh? Or completely no news yet?
I mean same thing as others, we need to see the cost first
if tandem oled costs 2x regular thats not a fix
I don't see it happening anytime soon
It doesn't cost 2X regular what... there's already tandem OLED monitors in the market now and it definitely isn't priced 2X the price of a regular OLED monitor
I'm not tripping, right?
only thing missing vs the 60HE would be split spacebar and am not sure there's enough interest in that for them to warrant the cost of two 80HE versions at this point
I just found one on my local e-commerce site..
I know CES 2026 is announcing MORE tandem OLED panels
ASUS's 1440p 540 Hz/720p 720 Hz tandem OLED is also available right? If i'm not mistaken
and that one is indeed SUPER PRICEY
I saw many people reviewing it already but you can say "oh asus let them have early access to test it out", so I chose not to mention this without fact-checking.
is that tandem in the same way that apple uses 2 screens? I thought 4th gen was just using another layer on the rgb pixels
Oh, wait
Okay nvm forget it then, we are not on the same page and I'm showing my lack of knowledge/inexperience in this particular tech
Yeah I meant tandem OLED as in stacking one layer of diodes on top of another
I think thats why they all it rgb tandem to use the same name for marketing
What technology or novelty does apple use..?
Stacking 2 screens or whut
I'm sure not right?
Stacking 2 OLEDs on top of each other yeah
yeah apple's tandem OLED and monitor's tandem OLED should be the same thing, no?
That's why there are double the display connections on the 2024 iPad Pro vs the Mini LED iPad Pro models
iirc apple uses 2 seperate screens vs here they just add a layer on the pixel itself and not a full second screen layer
idk names are too similar so I cba googling for a detailed comparison
hey Mr Ducky, we need your tech knowledge here xD
OvO?
What are you confused about exactly?
apple's tandem OLED is still just stacking diodes and not literally stacking 2 complete screens right?
addressing this question ^
No, they use 2 independent displays
Because the iPad still technically works when you disconnect one of the displays funnily enough
so literally 2 screens stacked together?
Yeah
Each have their own signal and their own power cables
Why does apple do this instead of just stacking the diodes on top of each other?
Higher peak brightness mainly
My iPad Pro 13 inch can get to 1000 nits in SDR mode
With 100% white pixels
Which is extremely impressive
Although it only does this when it detects a bright environment like using it outside when the sun is out
Otherwise it limits itself to right around 500-600 nits indoors
Although in HDR mode the ambient light sensor is ignored and it will go up to the full 1600 nit peak brightness when you turn it all the way up
Apple support all four HDR standards on the iPad Pro, I think. HLG, HDR10, HDR10+, and Dolby Vision.
Yes
Although some streaming apps don’t provide the full 4K and/or HDR experience even on an iPad Pro.
I have this one 👍
It also supports BT.2100 PQ, BT.2100 HLG, Dolby Vision Profile 8.4, and Dolby Vision Profile 5 in reference mode
what do you mean by this? Two power cables? You mean from the internals? How did apple stack 2 screens on top of each other tho.
apple didnt do it tbf
Apple co-developed it with LG iirc
yeah but thats pretty much LG's work then no? 😄
The Ultra Retina XDR display
Yes and no
They developed the display together
if this image is correct, then it really isn't two screens stacked together but two layers of panels no?
I mean isn't this still the same as what LG is doing now with their tandem OLED panels for monitor
Apple handled the electrical design for the most part since they use their own display driver technology and LG handles the manufacturing of the panels themselves
Afternoon Guys,
Anyone have a list of compatiable cases with the 60HE v2 module?
Don't forget the underlying display technologies themselves are vastly different, iPads use AMOLEDs but desktop OLEDs use WOLED or QD-OLED
Yeah I know mobile devices or even laptops use AMOLEDs, though I'm no expert so even after I googled many times I cannot remember the differences.
The only thing that I want to clarify is
Isn't both tandem OLEDs from BOTH apple and LG's upcoming panel technology, just essentially stacking 2 layers of diodes on top of each other, or OLED panels (if you will); and apple is not literally stacking two completely assembled OLED screens (the full thing) on top of one another?
good for you, how does it feel? I would really like to buy an ultrawide version
On apples iPad their tandem OLED solution is literally stacking 2 independent OLED displays on top of each other
Okay then the better question to ask here is, how does this differ from how LG implements their tandem OLED displays? Let me make an educated guess. In LG's monitor panels, they just add 1 layer of diodes but not the full functioning electrical circuit, so the additional diodes still take power from one source of HTL/ETL? Whereas there's two independent OLED displays on apple so one layer can shut down completely if not required?
Something liddat?
I think you should read this article and view the schematic diagram inside the article. If this is how the tandem OLED is stacked, then it's just normal tandem OLED stacking, not literally 2 independent displays.
the article you point to literally says though that its two identical oleds on top
I mean, if two independent displays then it would be two independent electrical circuits and so on, which I don't think make any sense to me. I would need you to tell me where did you find the info that apple's ipad pro has two power cables for the display though I think since you own one you still know better than me.
also why would that need two power cables wtf are you talking about
I don't know?? Ducky told me that the ipad pro has 2 display cables?
this ^
Its great, personally i only stick to 27 inch 1440p cuz 4k uses too much hardware.
But ill probably buy a 5k > 1440p tandem oled if that ever releases
and this?
the thing with LG's panel is that they use a 4th gen OLED technology that uses 2 blue layers and one red and one green layer vs with their 3rd gen OLED that uses one multi-color layer
Or am I greatly misunderstanding something?
two displays doesnt mean you cant just combine the power input
idk if thats accurate since I never looked much into it but display connection != power connection
they use 2 signal connections, one power connector, and one digitizer connector
39 inch 5k2k tandem OLED is coming soon, but I'm looking for 34 inch 3440X1440 because it's less demanding and I don't need that much screen estate
I would love a 27-32 inch 5k2k
High ppi
Still the fundamental way of how apple stacks their OLED and LG stacks their OLED is the same right? It's just stacking the complete emissive materials (including HTL/ETL and what not, because it is fundamentally necessary), just maybe the display connection is different.
Or maybe LG requires more filter because they use different colored diodes.
yes they stack 2 full spectrum emitting layers on top of each other
Otherwise it makes no sense to me lol
okay there we go LOL
I'm so sorry ducky but I absolutely hated the way you mention "two independent screens" and "can be operate independently from e/o" to me, although it's because I lack the knowledge and understanding, but that genuinely made me though apple make TWO SEPARATE screens and stacked them on top of each other (I meant literally backglass included), which made me so confused. Thank you for your time and explanation though, I appreciate it.
glad I could help you learn something new!
the marketing terms does make it confusing ngl
And this brings me back to what I initially wanted to talk about, tandem OLED monitors are here and more is coming from 2026 onwards, tandem OLED monitors may be a stopgap measure until micro LED can be commercialized but this innovation is still a massive improvement from traditional WOLED and QD-OLEDs in terms of brightness and reduced burn-in risks.
So it's not a bad time to wait a bit for tandem OLED to come out and just snatch one IMO.
The pricing is not bad either, at least in my country, just don't buy the premium stuff from asus if your budget is not there.
fundamentally its the exact same though so its not changing burn in just delaying it
which is a nice step but very far away from being a solution
Yeah I get it but it could last for 3-4 years if properly maintained.
Otherwise the RGB mini LED is also another thing that you can look forward to.
Apparently the asus one is kinda shit
Probably way longer than 3-4
The 720p 720 Hz refresh rate is honestly just a gimmick
Like man, even for esports, 720p is absolutely atrocious.
Nah it has black crushing and grey banding and more issues
Hmm wasn't expecting that.
if it helps, this LG video more or less explains the difference between their Tandem WOLED (desktop and large displays) and their Tandem OLED (for mobile and small displays) technologies https://youtu.be/-8Z870o6t5o
#LGDisplay #TandemWOLED #TandemOLED #WOLED #LGOLED #LGDisplayOLED
With boundless potential and limitless scalability,
LG Display once again unfolds the full spectrum of what OLED can become.
Always the Standard, Always Ahead: Tandem WOLED
Leading-Edge Innovation for Life: Tandem OLED
Tandem opens a new chapter in what OLED can truly become. L...
these are more or less the 2 main types of tandem OLED display technologies you will see
Same cuz it should be the same panel(but glossy coating) as the gigabyte one, but that one has positive reviews, so they fucked some shit up
Thank you, I just watched it. Based on how I understand it, tandem WOLED means White diodes + one layer of RGB diodes and tandem OLED means 2 layers of RGB diodes.
eh? basically LG's Tandem WOLED all they are doing is separating the R/G emissive layer into their own separate layers whereas in their previous 3rd generation WOLEDs they used to be combined into one layer.
they still use the 2 independent blue emissive layers like in the 3rd generation however
Yeah I noticed that I remember seeing how their tandem WOLED should be BRGB, but it makes me wonder why is it called WOLED lol.
the benefits of separating the R/G emmissive layers into their own separate layers is to allow for higher color volume and wider color gamut
it's called WOLED because they still have the white sub-pixel
It's called WOLED because the W stands for Winning
Was it blue yellow blue for their 3rd gen one?
for their 3rd gen WOLEDs they used 2 blue emissive layers and 1 Red/Green emissive layer
iirc
Hmm I wonder how they managed to improve brightness just by separating the red and green into two separate layers
Just because more diodes are available?
also by removing one MLA layer
because the R and G diodes are now separated
Has some pictures
it's also worth noting that their Tandem OLED technology does not use color filters at all and has direct RGB emission
unlike their Tandem WOLED technology which works like a normal WOLED but uses separated red and green diode layers for it's white pixels

This is the clearest, craziest VR headset that I've tested.
Pimax Super OLED: https://pimax.com/products/pimax-crystal-super-sony-8k-micro-oled (not affiliate link)
Need a new wallpaper? https://optimum.store
Video gear
Camera: https://geni.us/5YfMuy
Primary Lens: https://geni.us/pWnoPBr
I saw this, the swappable display modules I really like
means you can upgrade down the line if they want to continue support for it
oh nb seems like theres a couple 500 euro options for tandem oled
i was expecting 1000+
lol can any gpu run this with a game that's not simple just shapes
Can someone suggest a managed switch, i want to be able to monitor network usage, eg see how much a device used data wise a month etc
I know this can be done via router but i dont really want to buy a router as its just for ethernet i care about.
how many ports? also is rackmount ok?
also where in the network is it going to be positioned?
and its going to be positioned between your core layer and your access layer right?
oh LMAO
just saying i can get a rack one and shove it somewhere lol
my server is plugged into my router itself due to 2.5gb tho and its closer
PoE is needed but i can run a second switch just for PoE
aks the one in the pic
tbh long term i made need a rack one if i have access points in other rooms, espcially with poe hmm
so yes rackmount or no rackmount?
ideaily no rack, but if rack is cheaper ill take it
lol
your router handles L3 routing right?
or you need a switch that can do L3 routing?
yeah, check to see if your L3 routing is handled by your router or the switch you currently have installed
my router seems to be handling it
ok, then you probably want a small L2 fully managed switch
you can probably get a Unifi USW-Lite-8-POE
no, not at all
lol
tbh tho its a shame its only gigabit for that price
but you get all L2 features and the Unifi network application is self-hosted
I would get a Ubiquiti router but they are stupid expensie
i do regret my current router so much when the Ubiquiti UniFi UX7 exists
Unifi Cloud Gateway Max is 2.5G and is 199 usd
although all you get is the router, no wifi
Ye no
if you want built in wifi you need to get either a UDR7 or a UDR-5G-Max
£239.40 inc. VAT
xD
ill have a thing about it.
I have a cuboard i would have loved to re use for my servers etc haha
lolz
Put a rack in there, however i have no one to help me as i cant get in there withg my wheelchair and its full atm
ah
oh yeah UX7 is really cute lmao
and it has built-in wifi 7
only sad part is that you only get one 2.5G ethernet port
yet you get a 10G WAN port
which makes zero sense to me
desktop consumer PC as a server is so real
tbh they could have put a 10G ethernet port in that thing easily
10700/32//40gb ram (don't question it) with a 2.5gb pci
lol real
And my raspberry pi 5 running home assistant/pihole
Nothing fancy, fairly new into homelab
Ooo I wonder how a rack mounted PC would turn out
Like those people who build theirs on a wall
Without the case, just all the parts connected together
dusty 
YEP XD
It's what Linus does





