#🔌│tech
1 messages · Page 563 of 1
Apple iPhone users and (modern) car owners rejoice: Apple CarPlay Ultra is upon us, and it more deeply integrates your iPhone into your car than ever before. Aston Martin is the first car company in the world to feature the next generation of CarPlay, and it extends across both the central touchscreen and driver instrument cluster, with masses o...
I can help
French Canadian spotted
Phantastic.
Now for the sheer hell of swapping them all out. But first figure out if I need a new controller or cables.
Oooo, I hope Phanteks makes more phans I love their fans.
I’m hoping for something like the Lian li SL fans
RGB wise
Send pictures when you finished your swap out mansen!!
thats a lot of fans
And of course it doesn't come with the cables needed, cause lol proprietary standard.
that is quite a lot of fan-tech that you got there
how much did you pay for that 💀
Half of what Corsair charged me a few years ago.
they are only a tenner a piece, so not too bad
oh
This was 155€in total.
well in that case mine are more expensive lol
Still gotta buy a fan hub though it looks like.
why did you buy one triple pack and then 7 single packs
Because the reverse fan 3 packs aren't out till August 😦
And ironically if I had bought those, I could have probably done this today.
idk how prices are for you
Cause the 3pack comes with an adaptor cable that goes into a 4pin pwm and a drgb each
16€for a fan
39€ for a three pack.
Anyhow. Gotta wait for Phanteks support, cause they don't sell the cables.
still waiting on a case that wows me tbh
not like I need a new one but there have been some interesting ones recently
Yup
it should only power the LEDs
I've been using three-way splitters so far on my Corsair. Wasn't sure if I should daisy chain more than 3 to each cable.
the fan should be an entirely independent circuit
Evolv X2 and the Montech HSO ones were kinda cool
So...if I plug in the RGB but not the fan header, they would light up? I can remove the RGB leds from the math?
yea
unless they are doing weird stuff that is how it is supposed to work
Good point. I'll test the three pack and see what happens before I swap anything.
Time to look for a fan/RGB hub that also has a temp probe and open software I guess 😄
lmk if you find one that isn't ass 

all the software powered fan hubs that I know of kinda suck
All I need is to be able to use OpenRGB or something I guess?
Assign the correct number of total LEDs and it should give each fan unique LED assignments?
Kind of new to this cause lol Corsair ecosystem just works.
idk, never used signal rgb
use artemisrgb ez
corsair ecosystem would be nice tho I had bad luck with their fan controllers
and they just kinda died
I think Phanteks has their own thing. I do also believe these fans works with windows RGB system.
Yeah... they have their LINQ stuff, which I am trying to break away from 😄
then they wouldn't use 3 pin argb headers?
They don't normally.
This is what allows that.
well windows rgb would prob be a decent solution
Oh... it's nice to know Phanteks made a typo in their manual and never fucking corrected it.
yea they wrote link with a Q for some reason 
Gee that's odd. There's that cable missing your website specifically says is included.
bruh
Support us on Patreon: https://www.patreon.com/hardwareunboxed
Buy relevant products from Amazon, Newegg and others below:
LG 27G850A - https://geni.us/b9BJL
LG 27GR93U - https://geni.us/nNm4
Gigabyte M27U - https://geni.us/Lm8H9Al
Asus ROG Strix XG27UCDMG - https://geni.us/Kxed1
Dell Alienware AW2725Q - https://geni.us/Yhg0lr
MSI MPG 272URX - ...
Shame lg fumbled the overdrive on this, but this might be a nice alternative to the OLED dominance
IPS black monitor from Asus or gigabyte with a kvm please
is there a site which lets me used GPT DR AND GEMINI DR at same time, with one subscription?
Tiny ass monitors.
openrouter
not sure what DR is.. https://openrouter.ai/chat lets you pick mulitple models
is this windows 10 or 11
i find it really cute that the first phase of the windows setup wizard still to this day has old school windows 7 styling
if true
ik 10 does
Yeah it still looks oldschool on 11 in the initial installer
deep research
ultrawide gang

Idk how tf yall use it
I tried a dual mode 32” but returned it
let me introduce you to mfs who use the 57" samsung g9
gaming monitor
I mean i use the 49 inch version
I mean I get it for like racin sims and shit
But how do you use 47”
47 is basically 2 horizontal 27s
I play the vidya games
If someone forced me to use 32” I’d get used to it but like 47 is 2 27 inches
or just use 5 27 inch monitors in portrait
Sponsor: Thermalright Frozen Prism 360 on Amazon - https://geni.us/FUqbQC
The Fractal Meshify 3 case has finally shipped. This review and benchmark of the Fractal Meshify 3 looks at build quality, cable management, thermal performance, acoustics and noise, and value. We test the Meshify 3 vs. the prior Meshify series cases, talk about the Meshif...
oh my moumou
meshify my beloved
Can I has tldr?
About to go to bed, don't need tech Jesus whispering in my ear as I fall asleep

uuh new meshify
New meshify has a better fan hub (controlelr via web browser), a scoop to direct the bottom fan airflow to the gpu, proper clips for cable management instead of velcro straps, the psu filter comes out the side which prevents it from sliding while carrying the pc, better fan rail mounting system should prevent humming and reduce noise
oh and it's actually the moushify
Asmr tech jesus
Can anyone help me choose between these monitors?
ASUS XG27AQDMG 240hz 1440p OLED
ASUS XG27ACDNG 360hz 1440p OLED
Alienware AW2725DF 360hz 1440p OLED
I mainly play competitive fps games
I just checked their site I’m curious to see what’s going to be at computex. They got new fans
buy me plane ticket and wooting ticket and i'll stream it live for you

imagine having a car fancy enough for carplay or android auto
imagine having a car
check rting
Has exit lag worked for anyone here
exitlag is like a bandaid fix to the real problem
if it actually improves your ping then it might be time to find a new ISP
it also isn’t going to help you win games, at all
if you want to waste your money then you can give it to me
Exitlag defaults to german for me, but why 😭
Is exitlag some kind of VPN that just routes game traffic over their servers?
could work
But that depends on your ISP if it has shit routes to the game server it also might have shit routes to the exitlag server and in that case it doesn't do anything and might make it worse.
routers have advertised that forever too
Gaming routers 🥲 would be funny to try one of those and see if I can make it last over a year

Da fuck is that exitlag 
Funniest shit I ever saw 
It is fucking moronic
Nothing more than a VPN lol 
At least VPN's don't default to the language 0.7% of the population in my country speaks 😭
can't you just... change it
In the settings
Well yes, but why default to it 😛
It's like shadow.tech (the pc gaming site) where you can't change it, and it defaults to what 40% of the population speaks, so you have to read their terms of service in a language you don't understand
I mean shadow.tech has a Dutch site (59% of the population of my country) and a german one for the remaining %
But if you use those languages it's a hardcoded country, so you can't sign up in say Dutch for a Belgian address 😄
What's the official languages @plush stirrup
should i get this mic 
Dutch, French, German
Well then it should be in those 3 languages
Just like in canada everything is basically bilingual due to legal requirements
I mean if you have to default to one, default to the one that the most people use... or just default to English 🥲
That aswell
ebay is always in french for me
idk where to change it, it asks when I visit, Dutch or French, but if I click an email it's french
Yeah, or well web browsers are supposed to send language preferences now, just use that..
Damned lazy webdevs
(Unless blocked by your browser/adblock for privacy reasons)
Mansen
When can i give wooting more money
Where is my 2he refresh and my switchy plushie
It's important
There's no option to see the language in settings as far as I see, so I just get french mails, and if I click the site is in french 😭
i want clicky he
i like clicky modifiers
its how i have my og 2
Wooting hates us full size fans
i mean the market dose XD
fair
makes no sense for a company to make full sized anymore
At least if they made a numpad
I could put aside an 80he
Maybe i'd be interested
I just want a tkl again
i literally have a macropad attached the me two XD
buy an 80
I want a tkl
Same shit you lose like 3 fucking keys xd
no the arrow keys are in bad spot so close to the other keys
i dont want tlk i have 12 extra keys strapped on XD
more keys more better
we need all the keys
80he is just tkl but tiny bit smaller without any gain and the arrows are in a worse spot, I dont see any benefit over a tkl personally
why did you buy it then
because there isnt a tkl I can buy?
Exactly
???
They got u
the right control being in wrong spot is enough to make it a no go
It's close enough to be a "replacement" for a tkl
Proof is you got one yourself as a tkl fan
To use as a tkl equivalent
and?
Just pointing out then making a tkl on top of the 80 would make little sense
Because most tkl fans will do what you did and make do
okay dont care, I still would prefer a tkl
just use a saw on a 2
rather get the K688, same mic but less ugly
https://bsky.app/profile/arstechnica.com/post/3lp7xni3vk22l
It's almost as if they want to provoke people into piracy at this point 😄
Subscribers can expect to start seeing the new ads in 2026.
► Lazy Town - New Videos!: http://bit.ly/2pomR9p
Sing along to the Songs of Lazy Town!
Subscribe to the Lazy Town YouTube channel: https://www.youtube.com/channel/UCNuLcjVa3vCeHFyUeTKtBlA?sub_confirmation=1
Click to watch more Lazy Town Videos 🎬 🎤🎼
🎬 🎤🎼 All New Lazy Town - Karaoke/Sing-a-long HD : https://www.youtube.co...
I mean... if its only for people with the ad supported tier who cares
They already get ads regardless
?_?
who gives a fuck if its ai gen ads or real ads
I care 
Maybe being a sports fan with sports washing and merchandise that's a walking billboard isn't so bad after all
An ad's an ad... i'm not gonna pay attention to it anyways lol
Like it could be anything and i wouldn't give a fuck
I'd just... look at my phone
I don't pay attention to ads about hemmoroid cream for the ass
rookie
Do you sit there and watch those ads and go
Ah yes i love watching ads about hemmoroid cream
Dashi
you realize they make money off midrolls regardless if people are paying attention to them
the issue isn’t the ads being well… ads
what kind of tech talk is this?
it’s companies making money off of gen ai slop
They could be generated by a hamster for all i care
not that I know of
and I think I would know
Im just counting here how many times u can say hemorrhoids differently
i tried to pick the most boring topic i could for an ad
why u watch adds
if u dont topic dont matter 😄
@unkempt lake thanks for solving my problem 3 other people werent able to
thats on high+spamming odin+killing bots
enjoy
next time before spending 10 hours troubleshooting
Just ask xD
whos the other 3?
👀
2 people in pcmr and one guy here
Not them
ahhhhhhhhhhhhhhhhh
so the issue was the m.2 was failing because you couldnt update it?
samsung is still fucking stupid for not being able to install magician on their drives
pretty sure yea
its workin fine ow
its weird you had an issue installing it because it downloaded fine for me
i wonder why that was the case
see its always the easiest fixes that stress out everyone
i remember when i got my first pc built
was fucking hell
(thats because i let other monkeys build it and i should of done it myself)
when i built my first pc it was boot looping into bios and i couldnt figure it out
(i didnt install windows yet)
you buy your parts used right?
i dont think any parts of my current pc are used
i bought my old 3060ti used
unless you could my monitor arm none of it is used
NothingOS has app cloning!!!!
Can clone pretty much any app with OneUI through secure folder 
And you can do it again with work profile
Because why have a feature when you can have 2 of them
The legendary 3dfx Voodoo4 has been resurrected - in MXM form! Thanks to SDZ-Mods and Daniel Simionescu this custom MXM card brings 2000’s-era Glide gaming to modern(ish) laptops like the Dell M4800.
We’re testing Quake 3, Unreal, and even Half-Life 2 on a VSA100 chip.
And yes, someone crammed a Voodoo 5 5500 into MXM too. Because of cour...
alr my em6l arent cutting it
they suck my hd450se are more comfortable and also i cant tell the difference in soun d
anyone got reccomendations for gaming audio devices
iems and headphones accepted
preferably wireless headphones that are open back but idrc
“gaming” audio devices are a scam
good sound staging
wireless
Pick one
AirPods do both of these
can you guys recommend me a good headphones, ive been a speaker gamer for a while now and wanted to try out actually hearing footsteps
IEMs, over-ears, on-ears, closed-backs, open-backs, wired, wireless? 
over, either open or closed i dont really know the difference, wired
Open back u gonna hear the outside as well when u gaming closed not
For cheap ones closed-backs I'll always recommend the good ol' trio: Beyers DT770 Pro, Audio Technica M50x and SONY MDR-7506
Also FiiO FT1s are quite popular 
Yeah also closed if you don't want others hearing what you're listening to also or you share a space
Ft1s are pretty damn good for the price
The more ohms, the more power they need to drive, otherwise they'll be quiet
So 32s are perfect for laptops/phones/PC, 80 is good too, but 250 would like to have an amplifier or beefy DAC
In the end it's mostly about where those headphones will be used, in home, at studio etc.
And higher impedance headphones sound marginally better, but that's just audiophile space at this point
thnx
any reason to choose one of these over the others?
im split between audio technica and beyer just purely on looks really lol
Mostly how they fit on your head (🎵if they don't fit they sound like shit
)
And sound signature, M50xs are for example more bassy than 7506s 
thnx i can try out the audio technica somewhere tho not the beyer
I have M50xs for few years now, very comfortable and nice for gaming too 
koss ksc75
also where should i connect this, line out on the mobo or on the front pannel connectors
Doesn't really matter, but if you have a possibility to plug them in the back then do so 
get yourself a usb dac, simple usb-c to 3.5mm
FT1s run on anything and I think sound the best by far having owned both DT 770s and m50x
the usb-c apple dongle is decent, or just any other cable similar to this
in my experience the onboard audio is terrible
i dont have a way to purchase it on my country tho, im gonna get assulted by taxes again
That is a consideration 
tho, is it made from china, i found one on a chinese store and im not sure if its legit
as i said, if you are on a budget and want to try open back headphones, get the koss ksc75
i genuinely use them as much as the hd600s
aight ill check them out first then
they look weird though
seems like an easy purchase
if you are after looks then these will not pass
yea im only using it on my desk so im the onlyone that will really see it so looks is just a factor since i dont really know much about headphones
also this?
where are you from? which store?
Ph shopee
hmm never heard of this store
honestly i'd just grab something locally, audio is very subjective; everybody likes something else
find something that looks good to you and fits your budget, look it up on youtube and make sure it's not a total audio flop, buy, profit
Why is there no option to remap the wheel scroll to the keyboard in wootility? I have to use macros for that 
I believe that's on the TODO list to add. Can't say when though.

Ft1 pros look sexy 
whats giving the woting 60hev2 the 8k polling rate si only the module right?
so if i ave one already i could just order the module?
Sure.
Nah, it's just Mansen 
cause i js ordered mine 1 month ago i dont want a whole new keyboard
Some of us use somewhat proper grammar, even on social media.
just 1 word
isnt a proper sentence
at least in my language
so a dot would be wrong
this troll is annoying
No it wouldn't.
One word sentences are a thing in any language, friend.
well alright then
i didnt know
Yep.
Documentation takes so long.
New switches for Nuphy's Air75v3 include red tactiles and brown linears lmao
We sponsored ourselves! Support our ability to independently buy parts for review and get a B-STOCK GN Modmat! https://store.gamersnexus.net/products/modmat-volt-bstock-large or grab one of our high-quality GN15 mats here: https://store.gamersnexus.net/products/large-modmat-gn15-anniversary
In this review of the Corsair / Origin Genesis Pre-Buil...
huehuehue
Is the wooting 60 he v2 better than 80 he ?
It’s a preference
Do you want fewer keys or more keys? That's the main difference.
Also #🤩│wooting60hev2 / #🌟│wooting80he 😄
More keys
Twas a rhetorical question, that answered yours.
Odd how 50 series is starting to drop below msrp here
With like the 5070
but hey lower prices more hetter
🇨🇦
Overcharging for a build like that sure, but discolored water tubes and nonsensical fan curves, kind of expect better, also water cooling a cpu that really does not need it while using the stock gpu cooler.
Corsair stuff is kinda sucky
They branched out way to quick
So like elgato stuff suffered
Still it's tubing, could have used dark tubing if anything.
Good lord those stained pipes are bad.
Looks like they used year old tubing, that's been dosed with a lot of UVs.
Also whythefuck isn't the 5090 blocked.
For the 5090, it's launch timing from what I hear in the video, it is available now at an upcharge.
I mean... don't release a product like this until it's ready. And make sure the product meets... acceptable minimums.
Cum coloured tubing is not a good look.
tbo a prebuild should always be neopreme and delrin sblocks
The RAM is also very bland. It feels so randomly put together without a vision.
Is it an RGB party boat, or a sleeper, no glass or lights powerhouse?
clear stuff on a prebuilt is too risky
clear plastics are always a crack risk as they age
Definitely don't want to use plexi blocks, where the fittings screw into that.
But yea this system really should not exist.
But a mix of plexi and metal is fine.
acrylic can still crack
Sure. But the main risk is having it crack in the threads.
some customer will put it next to a window in the tropics
And shipping is a lot more precarious. I'd never ship a watercooled PC in anything short of a wooden crate with so much padding, it'd worth half the PC 😄
Should sell these with a service plan only in countries, where you can take it in for a one year checkup.
Also gives the seller a chance to upsell on newer parts 😄
No but those are metal on all sides, with a lot fewer parts that can go bump and cause issues 😄
unless its hardline, is issue is pcie slot damage
Oh the memories.
peak cooling
its busting with swagger
Never again. I still get mild PTSD from having to tear down my entire loop and take apart every component to clean out the EK milk coolant.
this isn't ek milk cooling look at the bottom right
👀
Oh dear.
cursed xd
at least its smooth i guess
i'm sorry not sorry mansen xD
Ducks and dragons got togeather badly XD
Mansen rn
To clarify the coolant went bad and killed my entire loop.
I spent two hours in my bathroom at like 1-2AM screwing every component apart, cleaning and scrubbing out the crud it had turned into.
EK eventually replaced all of the blocks.
I used ek coolant once... never again
I was beta testing it. Apparently later, retail batches fixed it.
I was gonna mention doesn't EK coolant settle like an absolute bitch? Haha
Orange coolant more like BROWN
Since then I've stuck with the clear, coloured stuff. Much more stable 😄
puke greenish brown
like I seen that stuff block up microfins so bad lol
Distilled water
Is all you really need
That's not cool looking though. And you definitel want more than just water.
Use colored tubing
Meh. I'd rather have clear, so I can spot any colour changes.
Which keycap size do I need at the wooting 8he because I would like to buy individual caps
What ?
Yes, so I want to buy single ones with a design but don't know if they would fit
Perfect thx
should i spend the money on it 
Lower tolerances when?
for what
Lower tolerance for bs
Lower number better 🤓
rv coolant is king
run 25% with distilled water
Thanks to KIOXIA for sponsoring this video! Learn more about their fantastic SSDs at:
https://americas.kioxia.com/en-us/business/ssd/data-center-ssd.html?utm_source=YouTube&utm_medium=LinusTechTips&utm_campaign=KIOXIA+Data+Center+SSD
https://americas.kioxia.com/en-us/business/ssd/enterprise-ssd.html?utm_source=YouTube&utm_medium=LinusTechTips&ut...
https://wooting.io/wooting-60he-quickstart
I don't know but it might be in here
Didn't expect LTT to take this record but makes sense with hardware being taken care of, cost is a lot more manageable.
they had enough contacts to get some samples
Just looked who the previous holder was and it seems to be some people from storagereview.com, which have similar access
Yes
https://www.storagereview.com/news/storagereview-lab-breaks-pi-calculation-world-record-with-over-202-trillion-digits
I am sure they will leapfrog linus again
LTT has set the bar beyond a single sever worth of storage
makes it much harder, and longer
the bottle neck at ltt was IO across the network
youd need 2+ PiB on a single server
Odd
vrr only when using the internal display
i dont really care cuz my tv is old and doesn't have vrr
But i'm still surprised that they didn't get it working
Perhaps in a later software update?
Reminds me sony still hasn't fixed vrr on the ps5
I am sure as an outlet they are well-equipped to handle that, more so than ltt.
its more who is backing them
yeah but your eye cant see past 30fps
Please don't ask in multiple channels, @whole lichen
i didnt see he crossposted
sorry for answerong
i'll axtually delete my answer now
He doesn't deserve to know
:(
I didn’t know mb
Reminds me of me messing around and failing with a switch plugin for xbox controllers and putting my wooting one to output as a controller. Didn't work at the time sadly, but would have been cool to use a keyboard as a controller.
I think the issue was it being detected as multiple devices.
opinions on the attack shark x68 he
its a keyboard 👍
fair
It would be nice if it had 1 more
It's an Chinese OEM board, exactly the same as the other guys
Don't expect 0.01ms nor true 8k from it
my monitor is 2560x1440
and nvidia control panel wont launch (briefly spikes to 100% cpu usage but dosent launch)
Did you enable nvidias schizo dsr or whatever its called
no

i play fps bruh
mystical shadow res upgrade
I saw 5070s for under msrp today lol
in store is wild though
under canadian msrp or under msrp if you do usd->cad
WHJERE
what is msrp
Canadian msrp
cop?
that is just us msrp in cad
Msrp is 799.99cad
549 usd is 760 cad
That doesn't actually matter tho
wait lowk my brother's 9070xt is bugging out should i return that and just save 300$
We talking about fucking canadian msrp lol
yes and take a guess what other countires msrp is based upon..
Ah yes let me import a 50 series from the us
thats not what I said
Or europe
I'm saying msrp is based on the usd price and if currency changes it generally is adjusted to the USD price
so if currency fluctuated msrp in other countries is adjusted to USD price since thats what gets used for global trade
its why eur msrp increased for anything when russia attacked ukraine and why msrp was lowered even by nvidia when eur was getting stronger than usd this year
Generally doesn't really happen on the canadian market
Tbh
Parts generally just stick
To their msrp
Adjustments may happen buy are honestly rather rare
find me a msrp 5080 or 5090
well yeah its rare that currencies fluctuate hard enough to make a difference
and then its still up to the companies to implement it or not
...
if you have a problem detail it instead of "is brokies"
Yes you can lol
ok so like whenever he plays games or watches youtube
any object that moves across the screen fast is like black
That's a 24h2 issue with chromium apps
can you translate that into english please
ok thx ill take a look
oh so that's why I couldn't watch youtube in brave and open discord without everything pausing and going frame by frame
yep
Ur welcome
I just disabled the mentioned hardware accel in brave, but that only fixes that interaction 😄
Yeah do the proper fix in the post xd
@bright briar you updated to 24h2 recently iirc you may wanna take a look at this
Ah 24h2 the update that keeps on giving
I'm a bit confused though, I've had 24H2 for quite some time and this bug just started a few weeks ago...
shrugs
dont question 24h2's logic
hm, interesting. this "fix" causes the brave tabbar to flicker like crazy when reenabling hardware accel. but at least no stuttering anymore
no
A potential fix for this? Finally?
Time to try.
oh, even funnier. since applying that fix I have a flickering black square top left. that's not brave itself flickering 
others in that thread report the same. now let's see if reverting stops it 😄 (it does)
the fact 24h2 released in such a broken state and has only continued to get worse really shocks me
well, it doesn’t
but you would think literally anyone at MichaelShaft would fix it
Just be cook and not have this happen 
Nah but for real its nice
uhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh dashi he said it didnt fix his problem
not my fault if he has a different problem
Also
It did fix it mostly
Dear builders, gamers, and tech enthusiasts — EK is turning the page.
After a year of challenges and uncertainty, the EK brand you know and love is reborn under LM Tek: a new, stable company founded to preserve and elevate EK’s legacy of premium liquid cooling. Backed by fresh investment and led by a team of seasoned professionals, LM Tek i...
So EK is under new management and has new backing?
Because as long as the old leadership still has money/stake in the older company I wonder how hard it will be to separate identity
pro scam
wait now I'm confused, what do you accomplish with this that you couldn't with a ball-joint or similar
@twilit schooner Good news, my mom agree to buy me a 180hz 32 inch ips monitor in the coming months. Specifically LG Ultragear 32GS85Q-B. Not oled but at least much much better than the monitor I'm using RN
👀 👀
Congrats
That's a big thing to get from your mother..
Ur mom is cool
Supreme rigidity and absolute precision, your lead screws are part of your motor mine are not. Mine are also bent at bit at the end. Also I can not use decouplers I wanted
The axle system technically becomes more relevant with heavier printer beds and more precision though
my point is, it translates both pitch and roll
you went to a great deal of trouble to do that when a simple magnetic ball does the same
or that weird bearing the trident has in its z mounts
The trident you have also uses smaller linear rail right
from your description earlier I thought you wanted to eliminate pitch
so it would only do roll
I wanted eliminated and hulahoop effect and just about any z artfiact
what does your solution do differently than the provided default solution?
Well ratrig used to use blocks which were really bad then more recently they used oldhams were make a positive difference
I come from the old times
Basically like your solution technically the bed cannot be like a hoola hoop
those relate to translating the z-screw motion up and down
we're talking about translating the up/down motion to the bed's freedom of movement I guess
yeah I'm just not clear on what this achieves
Okay let me put it this
The back Z is reference Z
And because of that the system very constrained
That is what my vcore was capable of
It is not absolutely necessary, it basically constrains the motion like your three smaller rails
However the axle may allow more degrees of tilting. I am not sure how far your bed can tilt
point is why not have this ball there
Also I guess besides that the only benefit is the whole assembly can be taken apart very easily since no decouplers
why have a cross-shaped axle
It basically solves the problem in a clever way not my idea. Ratrig had bad very bad printer artifacts
what's the problem? and why does this solve it?
And the company refuses to admit it for a long time
from what I can tell it's still the same freedom of movement
The Z screws being bent or twisted
You see where the screws are
sure
There was a rectangular piece
Which meant the whole bed could wobble because it was rigidly mounted
Enough of 12vhpwr when are we getting 24v ULTRApwr
The ball being a ball does not help, it basically floated and that motion went into the parts all the wobble and movement.
I feel like the solution is just getting straight screws 🙄
That is impossible sadly
Talked to Julian, they are all made the same way if I got thicker ones
Only thing that could be done is ball screws
Here is another way to do constrained Z arms. 6 linear rails one smaller ones near the coupling on each end
ohhh I understand now
given it's a 1500€ printer kit it's kinda insane they rigid-mount the z-screws to the arms if they know the screws are wobbly
just build the system with eccentric motion allowance such as with oldham couplers or similar and problem is gone
Those are like 500mm long also by the way
yeah
They did that years later
And the guy told them it is an issue and they still did not listen for years
so what the cross-shaped axle does is remove any translation in the X- and Y-directions (so bed can't pull forward or side to side and ride "up" the ball-detents) and removes yaw (rotation around Z-axis) to again avoid the same
while still providing the main function of the balls, pitch and roll
yeah complicated solution to a simple problem that really just stems from the base engineering
should've taken notes from the trident honestly
it doesn't even have oldham couplers but you can just leave the Z-nuts a tiny bit loose so any fractional eccentric movement from the screws (that should be straight anyway since they are integrated motors) is allowed
basically a poor man's oldham coupler
So he uses a star drive under
And it has not worn for years, printed by the way
In addition to that though, could be redundant but I have magnetic decouplers and preloaded rails
what does this mean
I will show you
One moment
Sides
Back
Slides out and bed can be grabbed and ran away with
He states makes testing and maintenance very easy though
I may give that a try later
I don't see the point, screws go through anyway
Yeah but from I see
Basically the arms are floating on that
So take off the rail mount screws and bed arms are free
So minimal assembly
Anyways the system was made by a guy who had a hand in the reprap days
thicc
Sponsor: Thermalright Frozen Prism 360 on Amazon - https://geni.us/FUqbQC
HAVN made the well-built but strange HS420 PC case from last year, and now the company is back with a heavy emphasis on thermal performance and acoustics -- though we'll have to test it in our own benchmarking and reviews. The new HAVN BF360 joins the HS420, with the BF360...
Sorry. I cannot take a brand name like "Harbour" seriously. It's just as bad as Byd.

its where they comefrom, they are in-ports
This is annoying ....
Have to choose..can't have it do both at once :/
My printer doesn't like 5GHz .-. so when we want to print I need to disable it and turn 2.4 on instead
Shitty hotspot.
Just use 2.4ghz. Your carrier pidgeon internet won't be able to push that anyway 😄
At least it shows me a list of connected devices.....pixel ROM didn't
Ooo even in the main settings page it shows the number of connected devices
True
This phone also natively supports double tapping to lock the screen 💜
So does Samsung 😉
You never used it, how do you know
I don't like how the current one UI design look, I prefer 6
and?
rpm-ostree repo decided not to have Chrome anymore, which I switched to for playing YT Music because Firefox was using too much RAM and made Minecraft crash when I tried to play it
but now Chromium, that I switched to cause the repo doesnt have Chrome now, is using just as much :/
is chromium using much or is it a big site that needs a lot
YT Music usually uses like 300mb when I used it on Chrome
both Firefox and Chromium seem to want to use ~1.7GB for the same site :/
I have just 12GB ram cause im using 4GB for VRAM
are you running out of ram
when Im using YT Music and Minecraft together, apparently so
ive set minecraft to use 3GB max but goes over that sometimes...
I have 8 tabs open on Firefox and its using just over 1GB
Gonna install Chrome from the RPM package...
Really?
Really what? That NothingOS shows the name of the connected devices or really that Pixel OS does not?
I wonder if I can change the printer's hostname....."Unknown Device" is a horrible hostname
it's unknown
Now that I have my previous phone sitting around, I can finally set up my smart bulb again
cause I Cant use the phone thats being the hotspot cause its not on the same network as the bulb technically
Even though KDE Connect doesnt seem bothered by the that, KDE Connect works just fine despite the hotspot device "not" being on the same wifi
I'm not seeing stuff that wasn't on my pixel
Why isn't it? It's hosting the network
Idfk :/
NothingOS is basically PixelOS with extra features
And a different quick settings design
You can resize these too!
And it has a light theme.... Unlike on PixelOS
Neat I’m gonna wait for the new pixel wanna see how the new chip turns out
What, pixel hasi light mode
Or do you mean white icons
yes but the quick toggles stay dark no matter what
Ah
the entire top half of the notification shade too
Isn't that based on what you select though
yeh, the color of the tiles themselves are
but the shade and expanded shade background is always black on PixelOS
I see
I can't stand how round the icons are on nothing os
Genuinely hate it haha
Other than that I do like it
Some widgets are square xd
XD
Why do you need huge buttons
Why do you need any at all
I would love a combo of Google and HyperOS
im just trying out the lockscreen widgets to see how I like them cause thats not a thing on PixelOS
I miss Now Playing 
I mean don't get me wrong, there are options.
But not the same
Oh wait
If only I could have text on the top left one, that's my desktop.
Also wish I could get rid of the home icon
Go to settings < notifications & status bar Scroll down and then change "smart device control" to none
:')
Now I need to capitalize my desktop
Link to Windows??
thats a OneUI thing right?!
wut
I've used it for many years XD
i dont have it
The only difference was Samsung you could stream your apps and screen to Windows. However multiple phones cns do that now including mine.
hows the desktop tile working?
google home connected to a Smart Wall socket?
ye
Xiaomi interconnectivity doesn't work with my pad 6 pro 😦
I cant try it anyway
dont have hyperOS except my tablet xd
I have HarmonyOS on my watch xd which is also Chinese and starts with H xd but thats different
It's because Chinese rom
I will say, hyperai is nice
Everything else is just Google lol
Global HyperOS doesnt have Interconnectivity????
Yes but they don't seem to like eachother
o.o
huh?
why you looking at people being hung and then looking at british meat
you like hung meat?

berry tickler is a wild name

Ticklemaster was his name
And the meat was a picture from my gallery showing my friend :Lenny:
LOL
You show your meat to friends????
Ye, I can send you a pic if you want.
be like moumou, have no object permanence
And go to another chat
you aint moumou
you cant tell me what to do peasant
why would you need more than one computer smh
he said he was looking to upgrade his also more than 1 computer is pog means you can have an HTPC
i hate you too chinese cartoon
im japanese cartoon you racist
I feel like someone should be banned
no you're korean

checks out
why is it bent? Are you alright?
Animation by me
Daffy art by @EllisBros
Audio by @KoltJolt
OG post by @ebola_granola
lmfao wtf is wrong with you
😭
I wouldn’t ask that bro
we gonna be here for hours
the ending took me out with the scream
you right mb
everything
but back to what i was saying
You said you wanted to upgrade
whos he?
you
it’s me, isn’t it 😔
i feel like youre looking at me for some reason
I'm not a fan of the 5080 but this is a pretty awesome bundle
bruh 5080 trash
thats why you’re one of the best mods
killer deal in maple syrup v bucks
for that price i'd argue its a good bundle
hey that's my motherboard
Me on b650e-e 
I couldn't find a b650e that worked well for my use case sadly
I needed the io
What's your board again?
who
Also i have too damn much storage xd
The ROG Strix B650E-E Gaming WiFi is a future-ready B-series beast, featuring 16 + 2 power stages, hyperspeed DDR5 memory, and next-gen PCIe® 5.0 connectivity. It features four M.2 slots with heatsinks, USB 3.2 Gen 2x2 support, WiFi 6E, AI Cooling II, AI Networking, Two-Way AI Noise Cancelation, and Aura Sync RGB lighting.
ima buy x870e mobo and $600 asus rog aio pump just to annoy you dashi
I dont use the rgb on it
and 5090 house fire starter gpu
Its a lil reflective tho
fake gamer
The reflection gives a nice vibe
I second this
how dare you deny the rgb
more rgb means more fps
i have the xfx logo on my gpu that's white that i can't turn off
That's a really nice b650
I like it
Good io and really balanced overall
i plan on getting a proart 670
no usb 4
shame
then what is that
i am wrong
But i don't care about usb 4
zoom
been like that for ever
its a random 256gb that came out of a laptop i upgraded years ago
The 2 usbc is real nice
Do you use them tho
XD
One for my 80he yea
everything other than my mouse is C
but... your 80he works fine with a usb a to c?
why not c though
Because a keyboard doesn't need c to c?
i mean c is just better though
you right im meat shaming mb
it would of odd to have straight meat in 2025
Episodes, games, and contests visit: http://www.mondomedia.com
An elderly man doles out the harshness on how Dr. Tran, Leland and Fat Friend might better peddle their lame little wares. Created by Breehn Burns & Jason Johnson.
damn i feel old now
thats in 144p still too
i got a 3070 and it spikes to 100% and i start to get frame drops and i dont know why
ram did the same but now its 32 gb ram and its chilling at 16gb of used
any help ?
Limit fps
wym ?
if your gpu is at 100% limit fps so its not at 100% load
a week ago the gpu was running around 40 and % while holding up 160-180fps
now it just crashes the gpu and it barly runs 120fps
you're giving like basically no info about anything so its hard to say what can help
i got this issue when i improperly OC'd my 9070xt had mods on the game
its stock
well nshidia 
i just remembered it was MR mods that kept crashing my game
and not an issue with the gpu
average day in the life of a new nvidia owner
It's an estimate
Estimate proves wrong, it updates
It also changes depending on when the product arrives into port
then it will track when it would possible be trucked over
imagine getting amazon orders in less than a week
Hi guys, my wooting 60he keyboard fell and now it kinda broke, the part where i the cable usually plugs into my keyboard is loose from the inside, is this fixable?
dose it still connect?
youd probably have to solder the usb-c port
or you can warranty your keyboard
When i plugged it in it worked, then sometimes it would disconnect and i had to replug
Now it stopped connecting completely after i picked it up
All within the timespan of 5 mins now it hasnt connected for 30 mins
How long does warranty last? I think i have this for almost a year
iirc its 2 years for the board and 4 for the led
dropping your keyboard isnt warrantable
What is? It wasnt really dropped but someone smashed it on the ground :/
Idk if you understand what i meant but the part of the keyboard where u plug the cable in, that part is loose from the inside like it wiggles
yeah youre gonna have to solder it back into place so it doesnt wiggle
Do yk how i can do that without a screwdriver
no, you need to take apart the keyboard in order to do that
and you need a solding iron







