#🔌│tech
1 messages · Page 491 of 1
Buy a stealth OLED shirt or hoodie to support the channel: https://hardwareunboxed.com/collections/all
Support us on Patreon: https://www.patreon.com/hardwareunboxed
Buy relevant products from Amazon, Newegg and others below:
MSI MAG 321UPX - https://geni.us/SUPxM
Asus ROG Swift PG32UCDM - https://geni.us/wN9RQ
MSI MPG 321URX - https://geni.us/...
But I don't remember them being.. moronic 

https://wiki.rossmanngroup.com/wiki/Bambu_Lab_Authorization_Control_System
👉 Merchandise: https://store.rossmanngroup.com/memes-dreams.html
🔵 Cheesy mugs & t-shirts: https://bit.ly/rossmannstore
👉 Rossmann chat: https://matrix.to/#/#rossmannrepair:matrix.org
👉 Recording equipment used upstairs:
🔵 HDMI capture: https://amzn.to/4bcXEFL
🔵 Camer...
hahaha so someone other than archive.org archived bambus website before they tried to gaslight everyone
Yep
Bambu has always been suspect, but they made such a good product that people still bought the product.
Lots of people in the community were just waiting for them to go full corpo garbage
The consumer 3d printer market is built on open source, even crappy Chinese printers are open source.
Bambu Lab, 3d printer manufacturer
And what's the scoop this time, denying warranty?
Hardware good and cheap, but... yeah... 
they made 3d printers that were actually desirable for new people as it was just unbox, connect, print.
but now that i know why they are not on archive.org and this new gaslighting of customers i have lost all interest in bambu
i rea;lly looked forward to getting an X or P series printer with multi fillament stuff
So wait what's the problem, lack of documentation?
They sell you a 3D printer and provide no manuals of operation?
Can’t wait till we create printer exclusive filament just like the good ol dell printers
They wanted all users to go through their software and account to print, even if only via LAN, without connecting to their servers
And limit users to only their slicer, with no option to use 3rd party ones
Ahh, that bullshit
Yeah that's just annoying, why I'm never buying a Dell or HP printer
Now they've backtracked to "you can pick between staying in our ecosystem, need account and companion app, or fuck off of our ecosystem, here are open protocols, do whatever you want"
But they've added so much gaslighting and passive aggression to it that it's absurd
And edited previous blog post, so people won't be able to call them out
There's some no bs printers out there
Sounds like a usb device to me
Eh I guess I'll just watch that vid
Did Louis Rossmann start talking even faster than usual
Brother's spazzing
Don't kids nowadays call people his age "unc"
Buy one with refillable ink containers, not cartridge system, and use CUPS' PPD, not official drivers 
That's all for 2D printer
Ink is horrid though, if you want to print less than every 3 days
Just get a laser unless you need color lol
Still far cheaper
Laserjets are cheap as hell
My Epson still works great after 14 or so years 
Ink dries out and you have so many problems it's not even funny
Not only new ink, but also printer needs service 
And with Bambu printer I don't really care, because all I wanted was a possibility to use it on LAN with OrcaSlicer, I don't give a damn about their whole "ecosystem"
I still have about a week to return it, so I'll wait how things will go, but for now it's pretty much alright to me 
Naw. It was removed from archive long ago.
But it does make for excellent drama.
Not that I'll buy anything from them anymore 
A gang of autistic engineers fueled by self-hatred and caffeine
No wonder it feels like home 
Can you print in silicon yet?
ye but they requested removal cause someone used it to tell people about bambu just changing some warranty stuff and then trying to hide it
I would only consider a 3D printer than can print me kitchen utencils 
you can
In silicon though
Any of them can do that?
Sure. Too bad for Bambu that they operate in the EU, so I don't care what their website says 😄
I don't plan to use non food grade silicon
I wanted to float Benchy in tea mug, but it flipped and subsequently warped 
pretty sure if you disinfect all the 3d print parts (especially cause silicone is resin printed) you could prob do food safe printing
Tea with a hint of PLA 
ssss
Why limit yourself to microplastics when you could consume macroplastics?
you need to replace all brass parts on the hotend
wat
nvm

getting a metal 3d printer so i can make forks and shit
uv resin is iffy in general
apparently there is food safe silicone resins
only some time until someone makes not just silicone resin for 3d printing but food safe
those wood+epoxy tables are super cool
not why i linked it lol
Oh yeah, gotta print this thingy, poop basket
Previously unbeknownst to me, A1 likes to fling purge across the room 

wasnt related to EU as they state 2 yrs for the EU
was more fudging over basically everyone else
Mhmm.
Ad: Use code: PCBWay-James Bruton to get $10 off orders of over $30 at PCBWay. Go to: https://www.pcbway.com/?from=JamesBruton
I built an omni-directional ball-wheeled bike. This bike balanced like a Segway sideways, and drives in all directions, which makes it the ultimate drift bike! I used five ODrive brushless motors driving omni-directiona...
Flashbacks to the woes of ball mice
at least they dont look like hard boiled egg yolks
You mean trackball?
oh trackballs
I guess technically a trackball is a ball mouse
I never liked trackballs that much, but they are better than old track pads for laptops and rack kvms
I do love my 3dconnect, which kind of takes the same input
I remember having one as a kid. It got a small dent that you'd feel randomly while spinning it. Did not work well
Pretty sure most people hate it when you dent thier balls
I have a friend who to this day swears by trackballs
review my future pc build . any improvements I can make?
Part List - AMD Ryzen 9 7900, Radeon RX 7900 XTX, Lian Li O11 Air Mini ATX Mid Tower
Swap board to B650 and upgrade CPU to 7800X3D/9800X3D
Otherwise looks okay 
And no need for separate thermal paste
1tb ssd seems low these days
Depends on how good you are with keeping your games library clean I guess -and internet speed.
i also doubt you need 10 fans
How would you even fit ten fans into the Mini?
The XL has ten fan mounts, and it's BIG
Mini has 8 too I think
1 back, 3 top, 2 front and 2 bottom
Then 2 on the cooler
That's 10 fans
Ye 1tb is painful
Couldn't relate.
But definitely manageable
If you have a secondary drive, however with my laptop I always feel the pain of 1tb
I would downgrade speed for size
2tb is pretty cheap these days tbf
This specifically since the CPU tower fan comes with it included
There's prolly a few celsius worth of improvements from top tier 15$ paste tube but.. it's a good fan, it'll do fine
so i only need 1tb i have it now and it still not full
85$ is way cheaper than what you'd be paying for 2TB so it's fine
the fans are just caus i can fit 3 on the bottom 2 in frond 1 at top 1 in the back and it cheeper to get them in a 5 pack so thats way
i manage just fine with 1TB as well. but that was in a pc from 5 years ago 🙂
I am unsure if it's the right time to buy a GPU right now
Just get x3d and not worry about paste is my recommendation.
X3D are a lot more expensive
no past ?
2tb the king, i got 2 of em in my system 
Tbf if you don't get the X870 and get a B650, that's prolly enough savings to upgrade to a 7800X3D
The cooler comes with paste
i want aircooling so no x3d caus it will get to hot and then i need to go for an aio
X3D doesn't need AIO
no you dont
And x3d does not get hot
Only Intels do
ok thx
X3d pretty chill
Source I run a 9800x3d and most of the time my fan isn’t even moving
u sure ?
60°C when gaming it's chilling
Yes very sure
I run 7950X3D and it's perfectly happy wit air cooler
amd wabsite says you need on aio
You don't at all
What I'm seeing wrong with that build is that you can get an X3D if you get a B650 board, don't buy extra fans and controllers and instead get a case with 4 fans preinstalled
Although maybe you need the cores so, idk
7800x3d at 69……. Nice…
No matter which CPU you'll go with, do not get X870, B650 is cheaper with the same stuff
What Cal said, and then get a 7800X3D which is a lot faster in gaming
Unless you need cores for work reasons
Don't buy the extra Noctua thermal paste, the fan comes with paste, and you can get a better case that already comes with 4 fans so you don't buy more
but .... i want the usb-c ports and wifi 7 lan 10
If anything there's enough savings there to go with a 9800X3D
-100$ from motherboard, -100 from extra fans, that's a 9800X3D
i want to start steaming not sure if i need the cores or not
For streaming you'll be fine with X3D and 8 cores
If anything the GPU matters more there lel, you should prolly get an NV card
amd fan xd or do you think the 4080 is so much better ?
I'm an AMD fan but you should prioritize what matters to you instead of brand loyalty
Unless you already 10G infrastructure go for it, otherwise it'd be a waste of money
And there are B650/E boards with USB-C
I'd suggest waiting for reviews on RTX 5080 and 5070 Ti to see what happens with those cards
i think they are 💩
Buying a thousand dollar card right now that is about to be last generation is a bit pre-emptive
If you need VRAM that's a proper argument, but it's better to wait a few days
mmmh true but my potato pc crashing
Also that price for the XTX seems a bit high, surely there's cheaper ones
not rly
It's a good card but I'd wait until Jan 29th or 30th when the review embargo lifts on the new Nvidia cards
its euros btw not dollar
Country?
belguim
I mean I can find up to 100 euros cheaper but that's just my country it does weird things with price
Kinda around that mark that you're paying for XTX so yeah saving isn't a thing
Meh if you find that price okay then it'll be a good card, Nvidia pricing is insane in Europe so RTX 5080 won't be within your price range
i found one for 860 something but i did not like the color of it
Priorities, huh
Future GeForce RTX 5090 Ti? This prototype card is reportedly 800W design. The first card with dual 12V-2×6 power connectors in the RTX 50 series is not an overclocking model like the GALAXY HOF or MSI Lightning but an unnamed prototype from NVIDIA. The card’s board was pictured and shared on the Chiphell forums, which […]
haha yea
In this video, I give a final update on the possibility of a KINGPIN Graphics Card for this new generation of 5 series NVIDIA cards. I also talk about new CA regional availability of my KPx High Performance Thermal Grease and the future of this channel.
Timestamps:
00:00:00 - INTRO
00:00:27 - Headed to the Post Office to ship out some KPx
00:02...
5090 kingpin is going to be like 3000 i bet
crazy you will need a 2000 w psu
You will.. not
800W is a bit insane so you'd need 1200W prolly but it'll rarely ever actually run at 800W prolly
Brand loyalty is the stupidest shit someone can do
Corporations do not care about you.
big brain moment
i own an XTX myself and right now is an absolute stupid time to buy one
Especially for the price you found lol too damn much
There's still so much rdna3 on shelves anyways they ain't vanishing any time soon
Is basic troubleshooting too hard for you?
1600w more likely as that's the most you can do on a normal outlet in the us
hey yall i’ve never had a pc before but i decided to get in to the market for purchasing my first i bought absolutely everything i need wooting keyboard which gets here in march mouse high end monitor etc all im actually missing is the pc itself do you guys think its worth waiting for the 5090? or should i just go for 4090 (im building high end to game as well as video edit)
You don't need a 5090 to game
Y'know, that's a better price than I expected for the UK.
5070Ti or 5080 is fine as well for editing
do u have any recommendations on prebuilt sights?
Are the 5k oled gonna release this year?
Weren't you the kid who ordered that intel ultra pc and 4080?
Like a few weeks ago
yeah i canceled it because of 50 series
I don't think so
Le sigh
its a laptop that is running to hot caus it on for to many hours.
i also decided i didn’t wanna go intel as a cpu
Well right now theres no prebuilts
Repaste it?
Get a cooling pad?
only websight that i saw would let me preorder is build redux and im on top of their list for the pc itself
but at the time i was i need for a laptop for school but i put it in my back one or two times and i think i destroyed the gpu
bag
Not how it works
well its crashing all the time and it disabbeles my gpu
There are a few
the graphics card itself is 2k
With 50% markup
The rest is a grand at most and not even gaming focused
someone know anything of this motherboard ? MSI PRO B850-P WIFI what does the p mean ?
Build a PC yourself
not experienced enough nor do i have time only free time i get to myself is weekends until september
Considering that is the only -P motherboard in the market, it means virtually nothing and that is something the manufacturer just added to the product
My b650e has 2 usbc 
There is a ton of tutorials on youtube how to build a pc
ah
name
oke thx
Oh shit when did you upgrade
Sounds legit what even is a cashtag
This sounds like a case for <@&1098943457654997093> 😄
They gone 
my god now i'm home during microsoft support hours
"we'll call you back"
lmao this company
9-17 on weekdays but you cant even talk to someone

to be fair, it's almost time for them to stop working
yeah but for me too
usually idont get home before 18
this is a multibillion dollar company
and they cant afford a ticket system or something?
they push AI on you but dont have a chatbot? something?
also you can have help centers around the world so the timezones do the work for you
but nah
their call center probably does indeed work night shifts 😄
@balmy vector what mobo do you have ?
B650e-e gaming wifi
asus rug right ?
On release when they had stock for like an hour xD
it is 350 euro here even more as the x850 that i selected
🇧🇪 belguim prices are so strange
Just get a B650 AORUS ELITE AX V2
Wifi + BT for connectivity, USB-C ports, 2.5g networking, it's a good motherboard and I see it's under 200
GN Extras Our Response to Linus Sebastian January 21, 2025 Last Updated: 2025-01-21 GamersNexus responds to Linus Sebastian's WAN Show segment Evidence Included PLAGIARISM: Receipt #1 - History of Failure to Resolve IssuesDATA ERRORS: Receipt #2 - History of Failure to Resolve IssuesEDITORIAL DISPUTE: Receipt #3 - Unprofessionalism in Prior Comm...
I just saw the word "attorneys" 
Okay soo what would be the best outcome for me in terms of a new GPU
Should i just wait till late march and buy a rx 9070 or just buy a gpu from 2nd hand and be happy
Bro I just read like regurgitated words for multiple paragraphs
just for them to say this only the minimum amount of interactions are presented below that are needed to prove the claims that were made and provide the requested evidence.
and then a following screenshot of Linus oblige a request and the dudes response is basically calling Linus's writing team uneducated
lmao
This one is fun lol
Linus saying people are a type of R word and autistic
yeah I saw the part where he was called less autistic than he used to be or something
Tbf Linus is ridiculously not self aware
honestly this whole drama is such a stretch
In WAN show 2 weeks ago says "Dude I'm not going to make that (Honey expose) video, that will be insane, people will think I just care about money"
Literally NEXT WEEKS WAN show "Dude I've been looking at jets recently"
Linus famously cares about money
Ah yes, because making videos about having a fancy house and a private jet.. does not make people think you care about money
Especially in 2nd hand market lol
Tbh I wouldn't join a lawsuit either if I was in his position
it would such a pain in the ass
This isn't about a lawsuit
LTT knew about Honey's fraud practices 3 YEARS AGO
And did NOTHING about it
Ah
i honestly do not think linus does much of the management
He allowed for Honey to harm other creators and his excuse is "I can't make that video cause people will think it's about the money"
It's morals and ethics
it feels like he is just being told what to do
Agreed especially since he stepped down
Wait so this whole drama is about honey?
The recent one got sparked by it
i dont think he knows much or is involved with other things like sponserships
I honestly have no idea what's the ltt gn beef is about
its not only about honey, it just added more fuel
I love the channel Drama Nexus
The whole honey stealing from creators thing was public knowledge back then too 😶
Info was already public, it's not linus's job to babysit other content creator's sponsorships. He could have handled things better but GN behaving as if everything is Linus's fault was stupid.
Linus Drama Tips
its started sorta with the billet labs thing that ltt messed up and then theres just been a lot of cases

it's not linus's job to babysit other content creator's sponsorships
not what anyone ever said or expects
GN did a video announcing a lawsuit of Honey and they showcased a clip of Linus saying that he knew about Honey's practices years back and did nothing about it, GN's point being "you should remember where you came from" and morals & ethics
And now Linus basically broke and is out on an attack 
it just is funny that they made videos like investigating our sponsers
Idk linus does feel a bit out of touch for a while
I mean GN's been taking jabs at him here and there for a while
There's more to it than just the honey thing
its not just gn and gn didnt even starte the billet labs thing
I watch their videos and GN did not really mention LTT since the original controversy
(but steve is definitely not doing it he best way either imo)
Steve is.. honestly a bit carried away at times
GN steve has had an obvious hate boner for linus for a while now and even when he was giving valid critisism it always felt weird cause he would always go above and beyond
Fairly sure i heard him being mentionned a handful of times
^ this is just funny to see
Maybe it's just my memory
But I respect the dude, Steve has the best intentions at hand
iirc the only time something was said was when steve called linus in the night as the first person when their channel got hacked, nothing else between now and the first disagreement they had
Yeah that happened, Steve was the first to call Linus and warn him about multiple of his channels being hacked
I remember the WAN show episode when that happened
Which time linus‘ channels got hacked
You‘re gonna have to be more specific about that one 
Tbf the whole deterioration of GN/Linus relations started with the backpack
"Trust me bro", the T-shirt, basically ridiculously out of touch Linus
Yeah and linus still kinda just blew that off hand wavey
GN said they'll treat LTT as a company not as friends anymore after that
Linus did not like that, I remember
Cause giving people not a warranty but a "trust me bro" is a very nice thing to do on a 300$ product
They are bound by law to give a warranty and they have since shown to take good care of their customers that bought it, if course it was a bad look back then but you cant say he was entirely incorrect
And a normal warranty policy is also just "trust me bro" written in more fancy language and slightly more legally binding
He shouldnt have been an idiot obviously but that whole thing was completely overblown
It was also very out of touch to then take that whole "Linus wtf are you doing, where's the warranty" thing and print it on a T-shirt
Yeah that is true
Cause that's very funny and not out of touch
I think linus has a way of taking serious situations not seriously and it ends up in shit like that
Linus is just unfit for a public position imo
To be fair, how many people that drop big bucks on the initial run of the backpacks actually got offended by the trust me bro
He's a decent worker and visionary for content I don't see him as a spokesperson
If that were true his company wouldnt be where it is
I dont think he‘s a bad presenter or anything like that
I do however think that he‘s a bad descision maker
Honestly though after skimming the Gamer Nexus article it feels like they intentionally have people at Gamer Nexus proof watching LTT videos just to point out when they're incorrect - a lot of the drama seems to come from Gamer Nexus'
I don't think Steve has bas intentions either.
I never took LTT videos as 100% accurate
None of that would have happened if someone more serious told him to stop and not make that shirt
Steve never had malicious intentions, but he's quick to burn bridges and I don't really see why
He literally started as a one man thing and went from there. He's always been the public face of it and if was bad at it, he wouldn't be that successful
I'll say tho he should improve on some stuff like right to reply
isn’t the whole trust me bro controversy almost 2 years old at this point
GN has some stuff thry need to get better at
I stand with GN on the right to reply thing
Right to reply doesn't really apply with public personalities and the ability to hide and manipulate evidence
Meh, that's my hot take, I disagree with GN being so hellbent on burning bridges, and I did not particularly see the need to include a Linus clip in the Honey video
Hard to "manipulate" evidence when you're on an extremely tight timeframe
Which is why GN should release their things in writing first then make a video out of it
But I'm standing with GN, Linus proves time and time again to be inept
Okay but seriously do you guys actually watch LTT videos and take all the information as 100% accurate most of the time they're being very unserious and making jokes about how they aren't even using final production products or they're fixing issues caused by other products they used by using a newer product
I think GN's right but nowhere near perfect
I've stopped watching anything LTT since like 2021, their stuff is just.. cringe
I want numbers and graphs
ltts viewer base is so large you can absolutely expect a large portion of that do think of the content to be completely true
especially when thats literally what they tried to do with labs
yeah have not seen labs content at all
every review uses labs data
I always thought the labs thing was a way for them to become a "proper" business and aim for selling a service to other businesses
thats why its such a meme because it has bad data so often lol
no they were clear from the start labs will not make money lol
I thought I remember them mentioning that Labs will also sell services to other companies
I think LTT can be entertainment and accurate at the same time. while I also just watch them for fun and entertainment, if they’re trying to give data out they need to make sure it’s accurate.
The only videos that i somewhat take seriously is the server/building stuffs or whatever but not fully
guys whats better huntsman mini red switches or gk61 w yellow?
LTT has definitely shifted content direction too
don’t send the same question in multiple channels
like renting airbnb to find hidden cameras
its not even your normal consumers technology anymore
its just entertainment
Just like the gold xbox controller
mb
Was that not the point of channel super fun?
Where they'd do just wacky shit?
And keep the serious stuff main channel?
They're putting dumb shit on main channel? 
Yeah i mean its basically entertainment only videos
you could scroll through the channel
Channel super fun is also less pc tech related
Isn't CSF dead?
I only watch LinusCatTips
Is that a channel?
I would unironically watch it
Also I hardly ever watch LTT and certainly not any of those sub channels but I do listen to the WAN show
gottem
ltt really fell off after that gn article
Also discord was robbed
We talked about it yesterday
March release in a tweet
Is meme worthy
WE DONT EVEN KNOW WHAT IT IS YET
It feels like they want to get this gen over with and have an actual launch with rdna5 or cdna
its just marketing messing up I guess, could all be fine but without a halo tier you need to price it after the competition is out
we dont have indications for anything else
Anyways the Asus Flow Z13 is 2 grand and I really want a tablet that has the possibility to play absolutely anything at FHD 
Though I'd basically never use it
Is stx halo on rdna4?
Keep forgetting that but it's disappointing every time
whats better gk61 optical yellow or huntsman mini red switches? and which is better wlmouse akitsu mouse or hitscan hyperlight?
yeah rip all the fallout from 3
Well they're working on an X3D Halo apparently and that could easily be "RDNA 4.5"
Why is the w key less bright?
Would be hard, not easy
X3d halo if planned for could be no change whatsoever just staple on the x3d die
We don't have halo die shots right?
We do?
who wants to play halo 3 with me
is 9800x3d out
Basically this
Yeah for a while now?
OK
In short stock though
yeah it released in november or such?
I mean one where you can see the compute structures
Or was there confirmation that halo CCD = client CCD?
yes in the CnC interviewr wiht mahesh
its the full one and the difference is how its connected mostly
Can't they slap X3D on both CPU and GPU?
GPU would benefit from super fast cache maybe
thats why i was asking for die shots, if you see the x3d connectors
halo has MALL already
yea but imagine 3x mall
we first need to see how much that even changes for the gpu
could very well be 100% power limited not bandwidth
maybe
but if it saves imc power?
theres always some section of the render pipeline that consoooooms bandwidth
yeah but the added cost is immense too so I just dont see it for a niche in a tiny product
can always wish
cpu x3d tho im very down for
I just want the interdconnect to be well enough that zen6 can use it and wont be io die limited
whats better gk61 optical yellow or huntsman mini red switches? and which is better wlmouse akitsu mouse or hitscan hyperlight?
I kinda want a USB hub that I can plug a Wooting Two and other devices into but I don't know of any good powered hubs. Does anyone have recommendations?
(The use case is one of those active USB cables to go to a couch for HID)
Do anyone know what lekker springs do?
they... spring?
I have one
Bounce
Boioing!
I just use some no name brand one and it works fine even with rapid trigger and crap like that
so much cat floof
No need for anything fancy
Yeah, but what about moumou rgb
hell nah
It does get everywhere
RGB is cringe
nothing should distract one from the game
unless Moumou needs attention
But it’s moumou
Moumou is priority
Give moumou the rgb so she gives you extra fps
Anyhow what i was trying to say is @iron wave even a fairly cheap on will work fine
That says it's a switch?
I've had pretty big issues with them in the past so I wanted to ask.
@iron wave https://a.co/d/1O5REY3
The USB 3.0 Switch Allows 2 Computers to Share 4 USB 3.0 Peripheral Devices, Such As Printer, Scanner, Mouse, Keyboard, USB Disk, Etc,Just Using The Button Swapping or External Controller.Don't Need Swapping Cables or Set Up Complicated Network Sharing Software.The USB Switch 3.0 Supports Ultra-f...
Used it for a while
I suppose I can just look for a powered hub if it's been solved.
Basically a hub that's switchable between 2 devices
So i can switch all my peripherals from my desktop to my laptop
With a little button i leave on my desk
Yeah in this context I don't need that at all.
I do need to find a KVM for my Mac though.
Welp this one works and is fine with my wooting 2he even if im playing games on my gaming pc
I need one that won't let the computers see the monitor fall off of when I switch devices.
why my wooting not working on my ps5? it connects but the keys dont respond at all
Is your Wooting keyboard not responding on Playstation, Xbox or in your Bios? Disableing NRKO will resolve this issue.
➤ Follow Wooting online: https://links.wooting.io/?id=VYzZf
➤ Twitter: https://twitter.com/wootingkb
➤ Instagram: https://instagram.com/wootingkb
➤ Discord: https://wooting.io/discord
➤ Twi...
thanks
yummy
Also why are you reposting messages from months ago
I went to search for what on earth was the name of that insane small case that was SFF sized but positioned the GPU properly with no risers and has enough clearance for a tower, and here you go reposting shit 
NCASE M2, just get that and that's an insane case
My next pc will probably be a rackmount case. Idgaf about looks anymore
Looks never mattered to begin with
You know what did though
Putting many cats on top 
Make the biggest warm station for cats
No that didn't matter either
forgot I had posted it, and because it's a nice SFF. Nothing wrong with a repost 
You should be ashamed 
I should though, with how pricey it is 
That's kinda cool
When the frog takes over the brain, you forget sometimes
Also @magic minnow that yakuza thing i showed i found among us in it, and maxwell the cat
Maxwell!
Casual reminder maxwell the cat was never named maxwell 

LIGHT MODE
They have shit write endurance, but fine for secondary storage
Vidya game storage
Since 2016 or whatever
Dark/light though, not light mode
Hybrid basically
Yeah, just don't put anything mission critical on those
I've been actively trying to kill this Sandisk sata ssd using it as a torrent and download write disk before I move the content to my nas.
soo a full system would be fine
So far the replacement I got is trucking along
I still need to buy a 2tb sata ssd for games xd
P5 Plus has better TBW, also shouldn't be that much more expensive 
I use p3 plus for games thank goodness
Sats ssd aren't that much cheaper anymore
As i cant use more than 1 m.2’s
I have currently found a balance on two 1tb NVME drives, helps my download speed is decent
I still have a HDD
256G NVMe for OS 
I have a 250gb 860 evo for my OS
I got 1tb nvme os, 2 2tb nvmedrives for games, and 1tb sata for video recordings
And thats my only m.2 in my system
128 gb slc ssd for os 
SLC? 
Slc last wayyyy longer than modern cells
"official"
What really is official about what Radeon slapped their logo on?
Yeah, but still, usual MLC/TLC last for quite long too 
They never made these themselves to my knowledge
Though AMD making their own SSDs would be.. interesting
Slc is like 100,000 write cycles while qlc is like 1000
Is perfect for like a server boot drive
OverlayFS 
Reduces wear even more 
He explained nothing btw
Other than there's major segmentation there where the Go version is basically a Steam Deck chip 
When's the Strix Halo handheld launching huh?
Z2E should be pretty okay though
You guys ready for benchmarks in a few days
when people want a 2 grand 140w handheld they will launch stxh handhelds
If it can't hold the battery for 5~7 hours when on battery playing indies, then I'm not interested 
If it can't run all games I'm not interested 
That's why I'm kind of looking at the Flow Z13 with the Strix Halo, that thing looks nuts
Again, would prolly never use it though
For all games there's PC 
I just want to play cool indies on handhelds while chilling in bed or outside 
Tbf Z13 seems a lot better than a handheld
I hate holding things in my hands like a Switch, I'd love the Z13 as a screen to put in front of me and then use a controller
Big screens are also big pog, that's why I have an S8 Ultra
Balatro for any occasion
Mobile 
I regret buying it, I have at least 300h or so already put into it 

i will never understand how one can play 300h in a digital card game

If game good then it doesn't matter what kind of game it is 
I have 2200 hours in osu 
OSU us also quite different
i did useless cable management 
Ayyy, risk of electrical fire significantly lowered 
Me with a 40 series GPU 
why should bad cable management cause fires
Oooh, like in PC case, gotcha 
That's nice, future you will be thankful when it'll be cleaning or upgrade time 
im pretty confident ive spent more than 300 hours playing klondike with physical cards, and from what i can see balatro is alot more fun...
It shouldn't unless you really fucked up.
I just got it, it's a lot of fun
I'm at like 510 days played across my runescape accounts 
gz, you joined at a contentious time 
Rejoined. I quit OSRS in like 2015
Although the account I play on is "new"
https://media.ccc.de/v/38c3-breaking-nato-radio-encryption
We present fatal security flaws in the HALFLOOP-24 encryption algorithm, which is used by the US military and NATO. HALFLOOP-24 was meant to safeguard the automatic link establishment protocol in high frequency radio, but our research demonstrates that merely two hours of intercepted ra...
hm yes very casual thing to make a talk about
great timing too -_-
ironman?
amd naming scheme is so confusing
Ryzen 9 9950X - $649 retail
Ryzen 9 7950X3D - $699 retail
wtf
is the 7950x3d newer or is 9950X shitty
X3D tax, means more better
lmao
X3D means better gaming, so you pay a lil extra
nothing wrong with the regular version
9950X3D is coming out soon to replace the 7950X3D
oh
im just looking for what's best now and within the next 2 months
price is sort of irrelevant
9950X3D is soon and will be the best gaming + multi-core work
is threadripper overrated?
going to use as part of homelab to run intensive loads and host k8s cluster
plus occasional game sesh
do you need that many pcie
like 25gig networking and shit ton of nvme?
cuz a 9950X is plenty for most workstation workloads
no
you gotta KNOW you need threadripper
the cheapest thread ripper 7000 is like 1300 for 24 cores
you can get 9950X mobo + ram for the same price
kek
if I was balling and want to make a giga home server, I would choose threadripper
but I don't do anything that would justify the money
how are the deals on 1st/2nd gen epyc on ebvay?
We also allege that there were derogatory comments made by Linus Sebastian in a conversation with Steve Burke on a private phone call on August 31, 2021 at 7:31 PM Eastern lasting 9m 43s, where Sebastian referred to Burke as being “less autistic than you used to be;” however, with no recording of said call, this can only be alleged and there is no additional evidence to provide
I find this way too funny
"less autistic than you used to be"
Tech bro beef is crazy
Lmao
It’s tech YouTube, they’re probably all turbo autists anyway
Proof or not, that’s such a dumb comment.
is it? most phones have a call history
You can also request it from your carrier
Logs are generally kept for a year or 2 for legal reasons
in a moumou database
I can check my phone for when a call was made. Doesn't mean I literally recorded every call though.
S25 gets announced today
yup, i will be reading the news about it
i am thinking of buying 1 even if it's relatively mid as the kids say
the S25 that is not the 5090 👀
teamspeak 6 is out
with the ability to screenshare
I'm more surprised that you can set your own bitrate 
Which S25 
probably the regular s25 or the s25+
might try a bigger phone this time around see if I get use to it
You could get a ohsnap on the back I love it
i'll most likely buy it anyway.. the s25u.
Dat Lilac, I want~
Same 
It’s pretty
So it's confirmed that the 16GB S25U is exclusive to the Asian market only. China, South Korea, India, Vietnam will have far from my knowledge. Looks like Asians like us are eating good one more time
progressively bigger lol
tis a silly one...
but not one really noticeable i guess
soo much ram
OnePlus did the same with the 13 I think Asia got the 24gb of ram and 1tb of storage
But why?
Because they take more photos, and don't want cloud? 😄
(And don't mind paying the luxury tax)
internet coverage on certain area is still spotty so it make sense
oldcals ranting Back in my days we didn't need terabytes of storage, we had those small rectangles called microSD, it was enough to put one in and it worked, and you could even swap it to a bigger one in mere seconds!
But Samsung wanted to be like Apple 
It's not like you need a constant internet connection to cloud sync though.
i just got txt another discount code now I'm at like $400 off with the trade in 
the curved edges really make it look like an iPhone from the side
In this video, I give a final update on the possibility of a KINGPIN Graphics Card for this new generation of 5 series NVIDIA cards. I also talk about new CA regional availability of my KPx High Performance Thermal Grease and the future of this channel.
Timestamps:
00:00:00 - INTRO
00:00:27 - Headed to the Basement Post Office to ship out a lat...
https://jh.live/tines || Build, run, and monitor automated workflows with Tines and their AI feature-rich platform -- try their Community Edition completely for free: https://jh.live/tines
Links:
https://x.com/ryanchenkie/status/1880730173634699393
https://www.virustotal.com/gui/file/b329b32fa3e87f2e8ff7dc3d080e2d042a5484d26f220028b556000389a43...
Nothing new.. Very annoying though. And an other good reason to have adblock :p
It would be so hilarious if we get a amd kingpin card xD
I mean I think a lot of ppl would be surprised
Or even a intel kingpin card
I must have no attachment to them so.. what's surprising about that?
I get it that they used to be Nvidia only cause EVGA, but.. new company, more selection? I don't get the hilarity
Saw a cool short though https://www.youtube.com/shorts/5LStXyYziLc?feature=share
In this video, I take the bold step of voiding the warranty on a 20TB external drive to save $100. While it worked for me, I don't recommend this approach as it could leave you with a non-functional drive. I made sure to pre-test, wipe, and reinstall the drive before proceeding.
🚨 Disclaimer: Voiding your warranty is risky and not advised unles...
I wonder if it's true the reason why an "external drive" with basically the same exact drive that's sold by itself for 100$ more is cause they are just shit bins stuffed into a lower quality product
Cause tbf it's kinda weird that you can just buy a 300$ HDD for 200$ and just.. save money
Ooooo, Teams wants to fight today 

Hi, Calslock
Thank you for your feedback!
None of it will be acted upon
Kindly, fuck you
Microsoft
Tbf I found teams just.. meh? Annoying UI but it does what it needs to do
You haven't seen bad ui. Teams is ok. It works. It does the job.. Doesn't excel
its just another jab at shitting on ms
like we know ms is shit but teams is kind of a reach in terms of the worst they do
I just want one thing
I just want to sit down, in a closed room, with this absolute genius who bound call to Ctrl+Shift+C shortcut
And one who had a brilliant idea of not letting people change shortcuts
Guess what happens when I want to try and copy some chat message 
you're using it wrong, you are supposed to right click to copy and press the call icon to call
ive got no idea where to put it but my 80he doesnt connect to the wootility app, with the browser its connecting without problem
anyone here might know why?
Are you on Linux by any chance? 
And you're using v4 or v5 app?
v4
Yeah lol I like curved edges 
Oh my 9800 shipped already it wasn’t meant to until late next month 
While im disappointed, im not surprised
is there a vendor in the US that does all 3 or 2 vendors?
would be funny to have kingpin cards of both intel and amd 
the whole point of kingpin was to go ham bypassing the limits that nvidia imposed, amd doesnt impose those sorts of limits on the vendors, (except for the really wonky cards) its just not practical to make an xoc card for not the best gpu,
thing is tho a kp card that doesnt get the 3dmark record is kinda ???
oh no amd has been putting up more limits in the last 2 gens so theres room to unlock things
intel probably not, they first need to stick around before we worry about a halo gpu lol
A kingpin intel card
for amd my hope would be that could help push management to not cancel flagships all the time even if its power hungry monsters and not moving marketshare because they need to understand its needed for mindshare
Sounds like a good meme
intel had plans for bigger gpus but obviously got canned since they arent in the best palce either currently
who knows how that translates for next gen
yea but arent there hidden tools that bring it all back still?
MPT doesnt work on 3 just on 2 I think? but havent really kept up there
Lets liquid nitrogen an intel gpu
Members of the NVIDIA design and engineering teams share their philosophy and how they approached the innovative new Double Flow Through layout for the flagship GeForce RTX 5090 Founders Edition.
Disciplines like electrical and mechanical engineering, plus industrial design and more come together for a fully-integrated product design that pushe...
Was kp still holding records post tin?
the quad 1080ti machine held the record until 3090 lel
Lol
1080 was tin
3090 wasn't and last I checked it was all HOF
KP is an amazing overclocker, but tin was the magic that made the cards the best.
is embargo lifted on 5090 yet? haven't seen any benchmarks
well I think you just answered your own question?
even if they arent as great, just the fact its a card for OC will mean it has more potential
since HOF/lightning etc arent really being made either
don't know - last time i checked was 2 days ago LOL
They still make Hof
for the 4090? dont think there was one
Yep
Just checked HW Bond and it holds the ultra record
GKVV`s 3DMark - Fire Strike Ultra score: 29398 marks with a GeForce RTX 4090 https://search.app/GVFBZUCu7ny6uz7A7
Also I don't think gigabyte has ever been their competitor the GPI space. It's always been Galax and ASUS
woah, in fs extreme, they kept the record until 4090 came out
🤷 a records a record
The actual record isn't even with kp cards
Yeah there's only a handful of profiles for the 3090s
I don't think timespy was ever one of them
also you are reading them backwards, titan is oldest
I'm on mobile so it's burry
roboclocker was so op that it held the record for 3 entire gens
Yep
That and the lack of multi GPU in a benchmark that historically loved multi gpu
Yeah timespy is the one that a good nvlink profile exists for
A6000x4 holds it rip wallet
20k for GPUs to bench
A6000 is the last of the 4 way so it will be a while on that
who knows, 5090 is quite a monster
this does really hurt to see on a WR tho
yea looking it up peak 3090ti doesnt even break 15k, 4090 is 24k
I finally got my money! Time to buy my epick new build
o:
What I have so far:
Case: Fractal Era 2
Motherboard: Asrock B650M-HDV/M.2
CPU: 9800X3D
GPU: 5080 (subject to change in the future since I have no choice but to wait for reviews)
RAM: G.Skill Flare X5 DDR5-6000 - 32GB - CL30
Haven't decided on PSU and cooler yet
What do you think of the exclusive colors
Be quiet or seasonic for the psu and Thermalright Phantom Spirit for the cooler
I should say that I'd prefer a PSU that is fully passive or at least has a mode where the fan can shut off
Install Fancontrol, you will be able to do that and many other things (for the CPU cooler/fans)
Also be quiet and seasonic are silent
Turn the fan off?
You can't
Most psus will be near silent and only ramp up when the gpu fans overpower the sound anyway
I had a Corsair PSU before that let me turn the fan off when below a certain power level. It never ever turned on
On good psu you will never hear the fan
Hmm, sounds nice
I use a sfx Corsair psu and never hear it
my previous psu was corsair and it made strange sounds
worked well but it made some strange... beeping every now and then
I have only had bad experiences with PSUs that didn't have fan-off modes
support told me its fine
but i wanted to try seasonic next
So far its nice but i have only used it for 2 days :D
Asus Rog Strix Loki 1000-watt is currently cheaper than that and it also has a fan-off mode
Seasonic: 2 700
Loki: 2 300
hm i'm not the biggest asus fan but if the price is the deciding factor sure
The Asus one is very uggy but the case isn't open anyway
The Vertex GX is for gamers and has beautiful, smooth, individually-braided cables that you can easily bend and cable route beautifully
This true?
I always have awful thick and stiff PSU cables that are horrible to work with
Dat's nice
But since my case is very small it might be better to get shorter aftermarket cables anyway(?)
i've never dabbled in custom length cables ^^
i wanna make my own keyboard i already have a keyboard that sounds pretty good and looks pretty good however i think getting another keybaord wouldent be bad tell me if these are good things i should be doing/using for my new keybord (maybe)
Starter keyboard : Wooting 5 Dye-sub PBT Magnetic wave keycaps
Switches: Gateron Oil kings
Keycaps (If i get any the wootings already look good) https://shop.minimaldesksetups.com/products/keycaps?variant=47612025209025¤cy=USD&srsltid=AfmBOopKya67E6uuPWorCAyEVKbog7syqL41N9GM91Pwc4lGSK8YLnJ5sno&com_cvv=8fb3d522dc163aeadb66e08cd7450cbbdddc64c6cf2e8891f6d48747c6d56d2c
so are these good ore should i change somthing or reinvest into my current
I don't like it
I don't like how everything I want has to be ordered online and having to wait several days to get them with no way of trying them
And if it doesn't work out you have to wait even longer for another chance
yeahh
so i should get them from the same company
or should i reinvest into my current keyboard
invest into $TAK
what shold i actualy put it into
#🔧│keyboard_modding might be better suited to help
Yo monkeys is phanteks a good case brand?
Idk a lot about cases but I need a new one to support a bigger gpu
Yeah Phanteks is nice I owned one before my current case
I saw some reviews and some people said something about a o11 case being better
What is your current one if you don’t mind me asking I heard that airflow is super important for cases
The LIAN LI & DAN Cases A3-mATX is a versatile M-ATX mesh PC case that maintains a minimal chassis size while accommodating large components. Thanks to the relocatable PSU bracket, the A3-mATX empowers you to build a powerful and compact PC system tailored to your needs and preferences. Minimalist Design Enhanced Modularity 360mm AIO Layout
This was the Phanteks I used to own it was just too big but plenty of airflow
it's not gonna be super important unless you push it with high-end components
just don't get the literal worst one haha
Igu thanks
Are there cases that are considered kinda like yk the best for performance
I generally don’t care about looks all that much
Just how it performs
Cases Best PC Cases of 2024: $80 to $800 Airflow, Cable Management, & Thermal Leaders November 27, 2024 Last Updated: 2024-11-29 Our best cases round-up is back! We're looking at the best gaming PC cases for 2024, ranging from $80 to $800 and covering all aspects of custom PC building. The Highlights Best Overall Case 2024: Fractal North & North...
I like the navy one
I wish they’d let you choose between black trims or silver
Sadly GN do not test enough cases for me to be comfortable to trust their "Best of" list in that market
They test very few, and when it comes to SFF barely any
yeah well sff sacrifices things for form so its hardly something to look at if your need is just performance
a case does nothing for performance, how could it? it's a block of material
cooling kinda?
I mean sure but as long as you don't get such a horrible one that it lets no air through I'm sure pretty much anything you can buy is fine 
it does in the sense that better airflow means lower temps and thus quieter fans or higher boosts depending on how far its running at the limit
a friend of mine cut a hole in the case with an angle grinder lol
17.99 usd 
Literally though
It’s like they want us to
Did you order it? I’m still on the fence
idk my pre-reg promo code isn't working which makes me not want to atm
is my rappid trigger on?
It’s not automatically applied?
my s key sometimes double taps and i cant figure out why 😭
I’m just gonna wait for the Pixel 10 and see what they show off with the new chip
@balmy vector doing that TODAY actually
gotta keep the magnets
Keeping the case warm with blanket

:D
For sure
I kinda want more magnets ngl
can never go wrong with more magnets
Puerto Rico 
Whaaa??
Google doesn't sell their phones here so that makes that a pretty easy non option 
How reliable is pcpartpicker when it comes to compatability in terms of size of components?
If it says x components fit into y case, how high of a chance is this to be true?
usually accurate since it just takes the numbers from case spec tables
for SFF I'd double check and such
Okay thanks
The M4 MacBooks and Mac Mini monitor support.
Check out the Anker 563 USB-C Docking Station(10-in-1) on Amazon: https://ankerfast.club/h12il6
🛒 Gear Links 🛒
🦾🦾 My Dual monitor arms: https://amzn.to/42nTA4I
🪛🪛Highly rated precision driver kit: https://amzn.to/4fkMVfg
⌨️🏢 Keyboard for office (heavy): https://www.keychron.com/products/keychron-q1-...
Damn... My motherboard can't fit in the case I want
Yep, HDV
Fractal Era 2
let me guess, its the number they say it supports, or its more/less because hes not following spec or using splitters?
oh yeah thats tiny
Had it not been for pcpartpicker I would not have known it wouldn't have fit. So thanks for that
I thought they did fit originally
Are there any AM5 mini-ITX motherboards you recommend?
never looking into smaller ones so would have to look at hub's big board reviews
I don't have requirements for Wifi or a ton of ports
Alright I will
@balmy vector @magic minnow loving how it turned out
ROXIE AND LAMB
Yess!!!!!
why only one intake fan
I should ask my boyfriend that 🙃
He bought the parts for me and I built it.
Im very grateful but this has been bothering me for a while
another fan on top wont do anything if your cpu is using an aio anyway
gpu just drags in air from beneath
if you have a fan might as well put it in, if not no point getting one really
Thanks for the info
Thats a thing for another time cause I just spent like 2 hours working on it and I just plugged everything back in
Yeah im aware 
sff probably means the usual air coolers wont fit
do check if the board has a pcie gen5 slot since we dont know quite yet if the 50 series needs it or not
The 1000 watt one is actually cheaper than the 750 watt one currently
I'll check
otherwise we do have the 5090 tests on friday so I assume TPU does the usual pcie scaling test and we will know if it matters
It says 1 PCIe 4.0 x16
A low profile air cooler
The 9800x3d doesn't really get hot tbh
meh those do get quite loud at that point the pump noises arent louder anymore
I haven't looked at Liquid Freezer 3 reviews yet, I forgot to do that. But the product looks cool and isn't very expensive
its a decent one for the price
I had an AIO before but it eventually died somehow and after that I vowed to never get another but here I am
SFF compromises xD
If you get a good one it shouldn't be too loud
shrugs
ohhhh cozy
Dave2D flexing on us
just get you a SFF that does support a big ass air cooler 
physics in small cases just limit what you can do even if you fit a big towercooler in, if the airflow isnt good enough in the case its still louder etc.
yes and we are talking SFF builds
I know i'm talking about somethibg else now
:3
Meshify 2 xl big
Gigantic
But i got it massively discounted and it was cheaper than the smaller version i was originally gonna buy
And my cat loves it
Hell this case makes me 7900xtx look normal sized
I care a lot about looks, that ain't it
Love how this looks
Especially the curved edges which remind me of the Xbox 360
What case is that?
Meshify 2 XL
It's gigantic
I can't say no to the cat
She loves it too much
Also gets her head at desk level for easy petting
The Meshify 2 XL is a massive high-performance case with a bold, stealth-inspired aesthetic. Its striking exterior features bolt-free, flush tempered glass, a fully removable top granting excellent interior access, and a fully redesigned front complete with USB 3.1 Gen 2 Type-C. The enormous dual-layout interior supports full-sized E-ATX and SSI...
Me too and imo it's a lot prettier then that
https://youtu.be/C1rHpHN_3L0
Check prices on Amazon below
AMD Ryzen 9800X3D: https://geni.us/x0lD
MSI B650-I Gaming Edge: https://geni.us/daCK
Arctic P14 PWM: https://geni.us/S37l
Corsair SF850: https://geni.us/avEMP
Ncase M2: https://ncased.com/collections/m-series/products/m2-grater
My Wooting keyboard collab: https://wooting.io/project-optimum
Need a new wallpaper? ht...
will gaming on a normal laptop cause more wear on the battery / laptop itself compared to if I were to game on a seperate device?
TECH






