#🔌│tech
1 messages · Page 490 of 1
at least you made an attempt then
Not everyone's gonna see it
and thats fine
nobody says linus has to email every person that saw the video
but people say he should have done ANYTHING
There's also the legal liability involved
What if I don't want said company to come after me and say i'm difaming them
True, we don't know what the sponsorship contract looked like
People have been sued for leaving bad reviews on google pages of businesses before
then you shouldn't be a influencer and never run ad spots if you never tell your viewers something bad if you know about it and mislead them
ffs LTT wouldnt care about honey suing them when they are aware of whats happening
ok lets say this happened in your firned circle. and you recommended smth to lets say 20 people you know. then that thing turns out shit. and 1 friend asks you what happened to that thing/place and you say oh it sucked. you then put a sticky note up at your fridge that all those 20 people COULD walk past but prob wont. then the 19 other people later find out from total stranger that the thing you recommend actually sucks. those 19 people get mad at you cause you didnt tell them. you then say should have read the sticky note on my fridge
in certain positions, like an influencer you have a certain amount of responsibility and if you dont take are of that people are correctly mad about it
no (thank shopify for that one)
i know this isnt the support channel but does anyone nkow what it means when it says my order is pending because it wont let me cancel them
I told you make a post in #1019755933959733258
it means its pending and again ask via the wizard. the discord isnt for order support
actually order support doesnt happen in this discord at all
i dont know how
I mean technically you tried, you just didn't put much effort into it
then go to #general and ask there
Saying it's malice is something else tho
ok
no thats you being an asshole to anyone in that scenario
thats not trying
thats doing basically nothing
doesnt matter?
could be both for all that matters
There's a difference between being just an idiot and being malicious
no?
both scenarios people have every right to be angry at LTT for not being responsible
it doesnt matter why you arent taking responsibility, you're not taking responsibility
and then after being called out he makes excuses
^
I still think it makes sense to reach out for comment though like they do with every other expose type video
so at that point there was a point of "yup we fucked up" if that was teh case
sure, that would be doing something at leat and not nothing
If i hit you in the face accidentally and you die then why do i get a lesser sentence than if I bash your head in meaningfully with a hammer
its not a legal situation
lol
Intent matters I think
must have missed the lawsuite against LTT for this
in either case you are being punished and thats the point here too
if linus was saying fuck, you caught me, I'm using honey to steal money, people would be even more mad yes
so that would be death sentence in your assault lawsuit example
https://m.youtube.com/watch?v=Lvvq2wYubEU&t=229s&pp=2AHlAZACAQ%3D%3D
People did know I guess just not enough people cared
in response to @megalag this 4 year old video video also Markiplier Predicts Honey Scam In 2020
in this one marcus talks about how the honey app really makes its money. some people claim this is the best free money app out there... others disagree... marcus is going to show you behind the scenes and reveal how they are using affiliate marketin...
If someone hurts me because of them being an idiot i'll be much more lenient on them and may even forgive them even if i was hurt. Where as if they were being malicious I wouldn't
saw that, thats only showing the referal part iirc
exactly why LTT making a simple statement would have been nice
roughly 1-2M views per video can make much more of an impact
but ltt basically admitted to knowing about it and not wanting to say something
the fact remains they hurt you. the fact remains LTT wasnt responsible.
again being an idiot or malicious doesnt matter
all these example you bring just arent fitting to the ltt situation
I just don't think it's up to ltt to babysit every other content creator's honey dealings
Yeah linus said the reasoning was he thought there would be backlash given his success that something that saved others money was bad because he didn't make the money
again they just needed to make a statement of why they stopped their honey sponsorship with what they knew
no one is saying they should investigate or babysit anyone
from what i recall LTT also knew honey steals the affiliate if they didnt find a code so imo thats a week argument
I'm curious
Does anyone here ever use affiliate links
Or affiliate coupons
On purpose
i do for certain channels
if I buy something on amazon anyway yes
might as well use the code for a chanel since I use adblock everywhere lol
affiliate links dont cost me anything and i can support a creator that introduced me to smth i want
I don't remember ever using
An affiliate link on purpose
Ever
I've used coupons if they happenned to be better than another coupon but i'll just take whatever makes the product cheaper for me
I guess so, they did post about it on their public forum but it wasn't publicized beyond that
He could say that it impacts all creators and give you worse deals that ones you could find by yourself
I don't think there would be any problem with that then 
Also never bothered supporting an influencer out there
the bad image could so easily be avoided by just featuring one smaller channel you talk to and have them talk about it or something, and that is when t
i dont think LTT knew about the deal limit thing
Always felt odd about "support the inflencer"
they knew it steals the affiliate though no matter if it finds a coupon or not
and if they didnt know about the rest, then you can still say "hey I never cared about the money but now we found out they are basically a mafia so we wanted to let you know"
"We ended the partnership with Honey due to the way their service interacted with affiliate links. Essentially, if someone clicked on a affiliate link (For example, one of ours below in the video description on YouTube), and then if they "use honey" and search for a deal, Honey will override that tracking link even if they don't find you a deal.
That didn't jive with us, so we ended the partnership."
yeah and even just that in a public video or wan show would have been more than enough to be responsible
yeah it would have been fine if they made a update saying they didnt know more and now that they know more they wanted to make people aware
would have been perfectly fine
but saying you never did anything because you valued your image over helping out consumers in the end, then you just didnt take responsibility for your role
I don’t
Not gonna make someone free money 
I don't think they knew it was affecting consumers, in fact the clip cuts off in the GN video before Linus says exactly that
yeah thats why I mean it would be fine to point it out after that has been brought to light
like I dont get how the thought wasn't "wait honey is doing what? and we had tons of ad spots for them? someone make a twitter post about it to point it out etc."
Not like influencers care about you anyways
XD
The parasocial shit wierds me out
People really seem to behave like these people are their friends
So is every channel out there
They're companies
Not yoir friends
Tech entertainment channel for sure
Sure, he doesn't have to do that
But he shouldn't complain later that he is hated on 
they dont have to be your friends for you wanting them to be held accountable
anyway to keep socd on cs2 without being kicked for input automation?
nope, i mean yeah u can by turning it off
Well same with gamersnexus if they want to be known as journalists they have to actually do things journalists do like reaching out for comment and not just putting out what is basically a hit piece in the middle of an otherwise good video
oh I didnt even watch the gn piece about it
I wonder how much the 9950x3d will be 
That's true, that jab at LTT was kinda unnecessary, MegaLag already called them out
Fells like just forced in just because
Free* upgrade 
My work pays for half and I'm selling my CPU to brother for another half 
the lucky one
Seems like LTT has extended olive branches they just haven't been accepted
i mean from GN im more interested in the EK stuff, NZXT
There must be drama 
LTT vs GN, Musk vs Asmon, PirateSoftware vs I don't know who from WoW
DRAMA 
Drama sells
Wtf is asmon and musk doing?
Wish I was playing poe 2
#🐸│memes message
Why aren’t you 😮
i mean the Asmon vs Musk drama is just funny
Ah....Elon being petty as usual
or atleast for me its just funny
Gonna get far worse this next 4 years
Got an infection and ended up in hospital 
Only 4... Unless he gets away with removing the term limit
Hope you get better

Thanks
I'll be alright it's pretty minor just gotta be careful being immunocompromised
Sorry to hear that damn
anyone here do coding?
get well soon my man
i would like to learn
tommyinnit vs dream
i want to get into it as well. Some people recommend me to get a full size keyboard for the number pad but some say my 80he would be more than enough
just wanted a coder opinion on it
game first code second, probably 80HE yeah
I would really hope they get to cooking up a Wootpad with that true 8K polling for them excel spreadsheet esports :O
could just buy a numpad separate
you probably could
Truth is you'll rarely use numpad when coding, maybe only to type some bigger numbers
But on 80HE I just made a numpad on Fn layer for everyday usage, I'm happy with it, that's all
if its not too much trouble can you post the fn layer?
i would appreciate it a lot
Oh, and can highly recommend
Bind Backspace instead of Caps
Took me few days to get used to, but it's oh so worth it 
Data Analyst and 100% the 2he
because of the numpad?
Yee I'd never go without one, but data analytics and coding are pretty different in needs
yeah you want dedicated arrow keys thats nice but wont need a numpad for coding
you can rebind stuff for rarely used hotkeys if needed
You don't really need the numpad tbh the extra keys would be nice for dedicated code editor shortcuts tho
I would say try coding first then decide if you actually need a whole ass keyboard, on that note just an external numpad would do fine
damn
Goodbye tiktok
wdym
and thanks i will try out both and see which i like more
Its banned in moumourica
i thought it got pushed back
Nope muricans just see this now
ohh i see. Thank you
This is the last one, promise🤞
Meta is meta
#2025 #CPU #gpu #fun #thermalpaste #pattern #AMD #Intel #Laptop #PC #turboboost #Asus #MSI #Razer #HP #DELL #GamingLaptop #TechTips #PC #hardware #idoitsoyouwouldntneedto
Tags are tags
Laptop, notebook, overheating, issue, throttling, hot, turbo boost, intel, amd, nvidia, core, cpu, gpu, gaming...
Anyone tried Honor Magic phones here
Chinese phone with bad software update support
breaking news: elon musk has money and may be a potential buyer of any damn company on this earth
Local Text LLM so far
Back in the dark ages, only people with 3090 can run LLM comfortably, now, even with 8gb of vram, you can play with pretty nice model. The good shit still need like 48gb of vram tho if you want speed.
Elon Musk buys Wooting and turns them into Muskboards
Musky Husky board uwu
¯_(ツ)_/¯
weird Musk&Qualcomm&GFO partnership
https://www.nvidia.com/en-us/geforce/news/small-form-factor-sff-ready/ Seems like the 5090FE is the only SFF 90 series card?
Will probably change but nice to see a list
weird that 80 and 90 fe is exact same size
Yeah, they confirmed it a while back that 5090 is the only one SFF-Ready
Which is weird, because all 50s FEs are 2-slot, there's no problem with power cable... Even Google cached SFF-Ready on 5080's landing page, but it seems Nvidia removed it
Yeah 🤔
Maybe it's about cooling? Iunno 
Either way there surely will be some 5080 AIBs which will officially work with SFF
Maybe but there are 80 series there on the list, even the unannounced ProArt
tiktok ban thingy
I'll bloody then a blind eye and not recycle you in a minute
Fun fact tik tok no longer works in canada despite it not being banned here, they use the IMEI of the device to determine if it's american or not and nice US and Canada have the same IMEI, canadian users are getting fucked lol
I guess they really didn't want people using VPNs
I thought it was accounts they used
Followup question: Why are apps allowed access to my IMEI in the first place?
Because apps ask you for permission and you grant it because if you don't it just goes "uh no we need that permission nothing sus is going on :)" until you grant the permission
on modern android thats not possible iirc
Guys aoc 25G3ZM or samsung g4 S25BG400???
android 9 or 10 split permissions between privileged info (mainly unchanging dtaa like serial number, imei, mac address and such. and then theres the old read perm for things like a generic device fingerprint and such. privileged perms are whitelisted in the OS and cant just have an app added to it unless you root the phone (at which point you can have more issues than an app reading your imei)
IM
speechless
Nice, so what do they say are the benefits of that?
yeah basically "security" and then you need to basically connect to the internet for "authorization" even if you wanna use lan mode
only SD card doesnt need auth
oh and you need to use their software if its not an SD print
afaik all third party tools cant do the authorization stuff
Don't update firmware, use OrcaSlicer still 
Ah yes I want my hardware to be secured... from myself
Took people several hours to extract certificate from Bambu Connect 
That much securitah 
i mean havent they been kinda not listening for quite some time now
and i also was interested in getting one but oh well
My A1 literally came 2 days ago 
Meh, it got update to firmware from December I think and it'll never see Internet access again 
wot?
World of Tanks?
A1 is currently unaffected, but essentially they want people to use their software, not 3rd party ones
Oh lovely. I'll make sure to make a mental note to not blindly update then 😄
Thankfully it needs to be bound to an account to even update, so you can just download app, update firmware to newest one, remove it from account and done 
And it just so happens that newest version is both from before that kerfuffle and it's the one where they added option for offline updates from SD 
apparently it forces updates before the print job starts in some cases
idk how that works exactly but thats what some people reported
Watching Mr. Rossman's video. Guess I'm keeping the printer in box while we wait for a community response to have an effect 😄
Only on X-series
It asks you on P-series to update, on A-series there still isn't update yet
#Breakthebamboo
Not the best timing with buying one of their printers 😄
what is up my fellow members ! 🤓
14 days as it's a EU purchase. But eh... company purchase etc...
my wooting 60he+ is estimated to come around the 24th-31st of january
Ooo, did you get dinosaur ones? Would you like to swap? 
I'd return the thing if I were in your shoes
Open source ftw
Pink obviously 
But I do get why you wouldn't want to bother with the trouble of it
if it says its estimated around 24th - 31st of jan do it mean the order is getting packed on the 24th and they gonna deliver it the next day
and then its gon get shipped
Delivery is exclusively via ICBMs
I'm quite baffled what bambu are doing....
If it say estimated 24th -31st that means it'll show at your doors around that date
10/10 pc btw
i went with fedex chat!
Even ender who up until recently aren't as horrendous as closing like this sheesh...
wanna trade for 4070 super ryzen 7 7800x3d
I'm considering it. But with how much trouble it was to order this thing in the first place... 😄
I have some time to consider.
Return and get an ender 3 V3 ke
Klipper ftw
its the same setup but it has a 9800x3d
or atleast i think
I am actually quite disappointed I will admit, I wanted a bambu myself so I'm not being a fanboy..... I almost bought one recently too hmmm
Meh
Keep it in LAN Only mode and problem solved 
But bambu were already pretty proprietary
mmh
They are locking out other slicers and require local loading of gcode.
And you can't control the printer without their software.
Not if you keep it on older firmware
Unless they can somehow retroactively modify it without Internet access
Right now I'm using Moonraker/fluidd with octoapp and a local VPN when accessing outside.
Thats not good enough....
Big breakthroughs are made with 3d printing regularly.
Methods etc
Yeah, accessing outside is the key
I honestly don't give a damn about using their services and I certainly don't want to connect printer to the Internet
It's in LAN, on older firmware, with blocked access to Internet
And besides it wouldn't update by itself anyway, it needs to be bound to account to do that
Jailbreak is likely if they don't rethink this.
Also does bambu offer firmware files so you can selective upgrade? Imagine getting a printer with ancient firmware and it only fetches the latest.
And you can only access the firmware online for the newest.
On A1 newest one allows you to load firmware offline via SD
And the latest one is still "safe" one
And honestly, that's the biggest change in the past year there 
If it's like some other printers stuff won't work.
For example older ender series stuff like the screen etc no longer worked so you had to do everything remotely.
Oh no?
Another thing to mention about jailbreaking is it's not always simple really.
Oh nvm that's still official
Blow on that thang
Except it took people several hours to extract certificate from Bambu Connect and make it work with OrcaSlicer 
That's the level of security we're talking here 
Came for the juicy news, stayed for the cat
https://www.youtube.com/watch?v=aIyaDD8onIE
https://wiki.rossmanngroup.com/index.php?title=Bambu_Lab_Authorization_Control_System
👉 Merchandise: https://store.rossmanngroup.com/memes-dreams.html
🔵 Cheesy mugs & t-shirts: https://bit.ly/rossmannstore
👉 Rossmann chat: https://matrix.to/#/#rossmannrepair:matrix.org
👉 Recording equipment used upstairs:
🔵 HDMI capture: https://amzn.to/4bcXE...
Same
I hear cat, i watch
I thought the video was about new tech for cats
@marsh glade did you see his other video where he didn't realize the cat next to him wasn't even his? 🤣
He was talking to the camera
The kitty council
https://youtu.be/bu_rjYHZj9I skip to 17:00
https://www.youtube.com/watch?v=ASJE0501nOA
https://www.repairshopr.com/repairshopr-user-access-and-license-agreement
https://www.youtube.com/watch?v=_QNMVMlx48E
https://www.youtube.com/watch?v=HibW8CQK1js
https://youtu.be/KYYxLiW85Vs
TIMESTAMPS:
00:00:00 - Insane intro
00:00:17 - Redefining words
00:00:25 - An ill Clinton the cat
00:02:41 - Re...
Keep watching lol
The cat just makes itself at home, I love it.
I'm so glad Clinton is back on the chair though ❤️
When things get too silly
Get on with it!
~Monty Python
this isnt even half of the noctua fans going in there
i have 4 more lol
uuh i bought 4 140mm for like 140€
and i have three 120mm from my last build
so overall i did probably spend around 250€ ywah

is the viper v3 pro solid mouse ?
what would be a better option? bc everywhere i see people rate it the best mouse
copy thank you 🙏🏽
Radeon RX 9070 launch with retailer background PC Games Hardware reports that their moderator “pokerclock,” a well-informed person within retailer circles, has shared a new update on an upcoming Radeon GPU launch. Previously, this source provided insights on the GeForce RTX 50 series launch, including details on how NVIDIA is handling business-t...
if true, seems like it's gonna go ahead exactly like everyone predicted
too little too late for too much money -> useless junk
Hope it’s sub 499
Considering 5070 is going to be around same raster as 4070, AMD can price higher than that
4070 super
Intel eating amd lunch
not really, B580 is higher than msrp outside the US and stock in US is barely there
I dunno 600$ is prolly what AMD will sell for
And unironically they can just tweak AFMF2 a little bit to insert more than 1 frame and they suddenly have DLSS4 
and all the recent discoveries with B580 has suck the wind out of the hype
it not the amazing value it was initially seen to be
Hiya
I'm confused as to why nvidia doesn't have a universal frame gen like afmf
Being able to add framegen to unsupported games is cool
Cause they haven't gotten around to it yet?
Or games with an fps cap
Didn't they say that they are working on a solution that'll work on everything of DLSS?
because they want games to add their software
Old games will totally patch it in clearly
they dont care about old games
DLAA
Well they don't advertise old games lel
Old games don't sell GPUs
Nvidia sponsored new games do 
Up to the devs to pick what they want to introduce
Framegen input lag in a racing title is risky
DLSS2 has no input lag so, there's that
Capped at 60 in any online mode
I like being able to go over the fps cap
Prolly unlockable with dll tweaks
No, you will not get banned
They're doing it for fairness with crossplay
Framerate affects physics ever so slightly in forza, it's why they cap the fps in online modes
Gives an advantage
Wtf, Fallout and Skyrim all over again?
They didn't cap it in Horizon 3-4-5 and the previous motorsport and it caused some unbeatable time records to happen
Does wooting only ship if all parts are in stock so they can send it together? or do they also send it apart
This makes the competitive aspect of this game basically pointless, especially in singleplayer. Some of the key game functions like timers and physics need lots of work.
Thanks to those who helped with the investigation:
AngelJA (Telemetry tool: https://github.com/AngelJA/forza-daq)
Hexor6T (@emoquit)
Danx98 (@dandavidson3942)
AkumaNoZero (@aku...
Lol yeah it seems there was a test done and people with higher FPS completed races faster lol
Talk about bad design
Seems it's rendered locally and then sent to a server, instead of the server sending you data and then the PC playing catch up, at least that's how I interpret that
(still funny how higher FPS caps break older games)
Yep
XD
So now you get why i use AFMF when im forced to play online at 60fps
Apex Legends Hacker Drama is getting Worse!!
clip via Imperial Hal: https://www.twitch.tv/imperialhal__
follow his Twitter: https://x.com/ImperialHal
#apexlegends
#ApexSeason23
#ApexLegendsseason23
#ApexTrailer
Apex hacked again
After linux got banned
Clearly linux was to blame
nobody said that
linux made it easier for people to cheat in apex and that was a fact
linux wasnt the only weakness of their not so great anti cheat
This is way worst than any of those "hacks" people could do on linux
so?
This is literally account hijacking mid game
yeah but hows this related to linux
glad I stopped playing apex months ago, shit it clearly dying
Because they were behaving like removing linux players was this one big great fix
And apex players were all like it's gonna fix everything
Which is laughable
I don't even play apex i just find this shit hilarious
this is a handful of players that will get issues vs a lot of people having super easy acces to cheat
not great for the game, bad look etc. but for the average player this isnt of concernt as constant cheaters who like 80% used linux
banning linux didnt fix their anti cheat but drastically lowered how many people would cheat
That's just embarrassing. The one thing you'd expect a RACING game to get right is the timing.
Yep
Time trial leaderboards be broken
It must be an absolute nightmare to try and admin any speedruns related to this.
Wait did the titanfall exploit stay in the game?

The RCE was patched
Well
The original RCE exploit
No clue what this one is
It was bound to happen they didn't have much time to sell anyways
I assume they are going to definitly sell like they were required
Again time to see people stick to a app which lowers the attention spam and just seems to throw trash at your eyes
I mean read the message, it literally says that because of trump they are back
tiktok was banned for 14hrs
just buy a 10$ key
problem fixed
just pirate it
just kidding that would be illegal and a crime and crimes are bad
👍
Wasn't trump the one who wanted to ban it?
It was
But he is a spineless twat and money talks 
yes, he directly started this whole ban in the first place
now tiktok is kissing his ass
Then why he trying to get it back?
money and publicity
if he unbans tiktok theres higher chances of kids liking him
because "he saved tiktok"
Especially when TikTok will put it in the pop-up 
I wanna see the decisions taken for the MENA Region
its all just a huge PR stunt
Yes this sounds like very weird
I mean
'HEY NOW WE SEE WITH U.S'
'HEY TRUMP ALLOWED US TO EXIST HERE'
From the Popups they shove it right into their faceit
Saw this on my phone, when i looked for a minute on youtube
How blatant can they be?
my key was transerrable so this shouldnt be the case. ill get it sorted
its crazy right? namedropping politicians
Then normally its just bound to your ms acxount
Sarcasm?
he isnt even inaugurated yet
yep but it doesnt activate. ill write them. i double and triple checked it
no? its plain crazy that an app is namedtopping politicians
Did you go delete your previous pc under "my devices"
yes
Ahh, okay, i thought it was sarcasm, my bad.
Yes I agree, this is just blatant attempt to manipulate people.
idk what ms is smoking. wouldnt be surprised if their server blew up again
ill talk with support
@analog sinew wait you speak german natively ye?
yes
"is it so far right" what
it sounds fine
They are a far right person dealing with rust I assume
makes sense
It is right so far?
Or more like
"Is it correct, so far? "
oh
too much, i only use 0 and 0.1
Sorry I use 7-adic numbers
01100111 01110101 01110110 00100000 01101101 01100101 00100000 01110111 01101000 01101001 01110100 01100101 00100000 01111010 01110101 01101110 01100011 00100000 01110000 01101100 01111010
beep boop
The RTX 50-series cards are coming and at the forefront of Nvidia innovation is a full revamp of DLSS, with revised transformer model Super Resolution and Ray Reconstruction, along with up to 4x multi frame generation. At CES 2025, Alex had the opportunity to sit down and talk about the new technologies with Nvidia's Bryan Catanzaro, VP of Appli...
Anybody got webcam recommendation 
they basically stated the only reason they used a transformer model is because the increase in tensor cores allows them to fit it within their budget
that's probably why they were showing games with a toggle between CNN and Transformer model
White keyboard case and black caps or black case and white caps ?
Probably safe to assume even though all the RTX cards are getting the newer transformer model it's gonna suck even more ass for the latency hit
Elgato
Have a good 1080p and 4K web cam
you have a link?
Although I’d probably just get the 1080p model to save a fair amount of money: https://www.elgato.com/uk/en/p/facecam-mk2
I recommend 720p or lower webcams over 4k ones to hide imperfections in your skin
720p 60 fps webcam is perfect for my use
https://wiki.rossmanngroup.com/index.php?title=Bambu_Lab_Authorization_Control_System
👉 Merchandise: https://store.rossmanngroup.com/memes-dreams.html
🔵 Cheesy mugs & t-shirts: https://bit.ly/rossmannstore
👉 Rossmann chat: https://matrix.to/#/#rossmannrepair:matrix.org
👉 Recording equipment used upstairs:
🔵 HDMI capture: https://amzn.to/4bcXE...
yay more reposts
How does this stuff work?
It shows an actual photo of my earbuds in the battery level notification
It even shows them in the same color that I have
Is this part of Google Fast Pair?
true
my nintendo switch does that with my joycons
Yeh cause those are both made for eachother xd
Seen it work with third party controllers tho
I didn't know Android could do this for third party earbuds
Thought only pixel buds would be supported
Like my teal 8bitdo mini controller shows as a teal joycon
Oo that's cool
Hi please I need help for choosing my keyboard.
In term of performance the 3 keyboards are the same? You mentionned the 60he+ for professional but not the two he . Thanks
the tech is pretty much the same between the 60HE and the Two HE but the Two HE has more keys to scan which slows down the response speed
the difference is pretty negligible though not something you would notice in person
not really
There is the counter straff thing with the two he?
yep
Thanks a lot
idk what you are talking about, people used higher hz scrrens and it was obvious, people used 8khz devices for a while now and for keyboards it is extremely similar to 1khz
this isnt a new untested thing that people might be wrong about
yes and I'm saying acting like 1vs8khz is the same is just wrong
010000000001001010101010101010100101
transformers are extremely parallel, cnns are less so mayb but mayb not
that never existed btw
the majority had no idea, out of the minority who knew anything, the folks in industry (military or remote control displays) knew you needed more, and the folks in cinema wanted to keep their minimum tolerable as long as possible so they wouldnt have to spend so much on film prior to digital, and after digital they want to keep it low so that they dont have to change techniques
ceramic treated steel pad
@ashen spindle
https://youtu.be/jC_z1vL1OCI?t=5954
found where the apple custom x86 emulation myth came from, and the truth about it
HUGE shout out to Casey for coming on and helping me finally understand CPUs. ARM vs x86 is not as simple as we might like to believe...
CASEY'S STUFF
https://x.com/cmuratori
https://www.computerenhance.com/
Check out my Twitch, Twitter, Discord more at https://t3.gg
S/O Ph4se0n3 for the awesome edit 🙏
timestamped
dont sweat
Yay
The app uses asarmor to prevent easy reading, the key is stored in ./app.asar.unpacked/.vite/build/main.node and can be extracted. Unpacking app.asar without fixing it first will result in an encrypted main.js file and 100 GB of decoy files generated, don't try it.
Aah, good old zip bombs
This is getting interesting
https://www.reddit.com/r/OpenBambu/comments/1i5kp0t/we_will_be_getting_an_update/
I still have 11 days to return, we shall see 
I have 14+however long it takes to deliver. I already sent Bambu a strongly worded email
Seems like as perfectly acceptable middle road. Completely removing yourself from their ecosystem.
They can't wiggle themselves out of warranty here in the EU anyhow.
I mean I don't really care about their ecosystem, I just want to print via LAN, use 3rd party slicers and get firmware updates
If that means I won't get access to their cloud service or MakerWorld then I'm absolutely fine with it 
You won't get firmware updates most likely.
At least not from Bambu - but I bet community ones will happen.
Yeah, firmware updates are the biggest problem
If not for that I wouldn't even care about the whole issue
Why this shit had to happen the very next day when I got it and I was so happy with it? 
Or literally one day after mine ships 😄
That's true she's such a hot nugget
should've taken a page from the people who come on this discord to hem and haw about the purchase for a week while asking every question imaginable


Become your own enemy
Opinions please? https://fi.pcpartpicker.com/list/37Q98Q
Part List - AMD Ryzen 7 7700X, Radeon RX 7800 XT, Phanteks Enthoo Pro 2 ATX Full Tower
Looks good, 850W will have a lot of headroom for this build, but you can swap cooler to cheaper aluminium block instead of AIO 
Ehh, I do want arctic AIO as they are pretty good
besides that, they'll cool pretty nicely with the pc case

Sure, if you want AIO go for it 
7700x doesnt need one right?
Because I'm basically gonna be selling my current PC and get a new build up
and aio is a complicated air cooler
Nah, any Ryzen can do with air cooler just fine
It's only cuz my room gets easily dusty, so I wanna keep the dust at a minimum
Towards the fans mainly 
Positive air pressure in the case and no dust filters on air outlets and you'll barely have any dust in PC 
It's crazy how my room is the only room in this apartment that gets the most amount of dust 😭
It's more of a how AIO is not necessary on Ryzens, but if you want one go for it 
On high-end Intels water cooling is pretty much a requirement, air cooler won't do
I know, just want the very quiet experience
Love you all for the opinions, thanks <3
Keep in mind AiO pumps are often louder than fans that are barely spinning
I’m on a 1050ti rn so
Upgrade is needed,
Im spending around 4k on it
Hyte 70 touch case, 32 gig of ddr4 ram
Ryzen 7 9800
I think
I just took advice from a mate who’s building it for me
For 9800 you'll need DDR5 RAM 
And don't take X870 board, B650 is more than enough and you can put money in other components
DDR 5* I’m useless with components ngl lol
X870E 
I’m just paying 😭
Overpaid much for that one 
Oh well 🤷
Already paid lol
So can someone explain how this dlss shit works with to 5090, is it gonna be Dogshit for games that don’t support it
using math and a lot of data, it generate frame between 'real' frame giving it the feel of smoothness. Game that don't support dlss either too old or too easy to run for the dev to add.
Worse, dev just lazy
best tldr I can think of
That's framegen though, not DLSS 
DLSS is whole suite of tools
One you're talking about is Frame Generation 
So it won’t be better than the 4090 without dlss?
it'll still be better, has more vram and new arch.
Ohh ok
plop
Ty 🙏
Alright, so LAN Only Mode in developer mode stays the same even on newer firmware, Bambu Connect integration is only needed for if you want to use cloud
Hmm he does pull up Dougall’s reverse engineering site where he talks about the extension to enable extra flags which is where I had the info from too

damn i have been desensitized by wooting's preorders lmao
i must say, them having 10 bucks dhl express is nuts
Lol for now
Wait 6mo and they will do it again
It's 100% for forcing cloud subs
It's internet startup 101
Make cool shit everyone wants spending VC to pay for servers
Then scramble to pay for those servers
I mean Bambu is private Chinese company, so no VC 
But, like, let people use their printers completely out of their ecosystem, no server cost then 
And it's still not clear if Bambu Connect is required or if you can print straight from slicer in "developer mode"
I mean, they got to the moon
Check out Seasonic Prime TX PSUs:
https://seasonic.com/prime-tx
Music / Credits:
Outro:
Dylan Sitts feat. HDBeenDope - For The Record (Dylan Sitts Remix)
Paid content in this video:
- Seasonic Spot
Samples used in this video:
...
Gesundheit.
there the english version

moumounese version where
bit weird they arent allowed to show bench numbers yet
https://wiki.rossmanngroup.com/wiki/Reverse_Engineering_Bambu_Connect
https://wiki.rossmanngroup.com/wiki/Bambu_Lab_Authorization_Control_System
👉 Merchandise: https://store.rossmanngroup.com/memes-dreams.html
🔵 Cheesy mugs & t-shirts: https://bit.ly/rossmannstore
👉 Rossmann chat: https://matrix.to/#/#rossmannrepair:matrix.org
👉 Recording eq...
hahahaha
security so much
now you can just sign your own firmware
If I had to guess someone in the higher echelons of reviewers couldn't get good bench results, and had to beg nVidia to postpone with new drivers.
Bambu also basically backtracked the whole thing and will offer a permanent LAN mode without "support", while also blaming everyone but themselves for all of the "misinformation"
synthetic benches 27% up. der8auer also shows some slides comparing this to other gen jumps
nvm it isnt firmware keys its worse. its keys to the cloud stuff
lol
So much for a closed ecosystem with lots of necessary security.
"security"
Meanwhile over at Bambulabs.
Nothing says "We f'ed up" like excluding your latest blog post from the way back machine so you cannot compare edits to the blog.
should be able to manually save it though
Oh yeah - People saved it elsewhere in time as one would hope. This just shows how petty they are.
#🔌│tech message
Here's the official "now hear us out" response from Bambu.
🤔 Why is there a different AppImage just for Ubuntu? AppImage is meant to work the same on any distro
apparently has to do with webkit
GHA is outdated, interesting
just saw a youtuber say that shorter key travel on their keyboard is better because they type faster and their fingers dont hurt as much as using a keyboard with longer travel
might work that way for that youtuber
Dat price... xD
pointless, as we saw with nvidia just last week, we had prices that were like almost 2x the actual ones as placeholder
it says in the title that the price is placeholder
Yeah the prices are not real. But it just reminded me of how expensive my 3080 was.
The MSRP was just so unrealistic with the shortage. I remember my cancelled preorders going up by 200€ or more
MSI's 2025 refresh of their 32" QD-OLED releases in the UK next month, apparently. That might just tempt me given they've fixed the HDR 1000 accuracy issues unlike other vendors.
Theoretically.. if I were to get a 5080.. will my ryzen 7 5800x3D hold it back?
we dont know yet
benches arent out
Is it just the 5090 that’ll be public at the end of the month?
not like you have good chances to get one on release if any past releases were any indication
parts holding each other back is not a thing anyway, it depends on what games you play at what resolution and so on
5090 testing embargo drops 24th. 5080 testing embargo drops on release day for both cards (30th). Kinda suspicious that you basically will have to buy a 5080 before you can see any testing reviews in order to beat the scalpers.
well you coudl go from gpu bound to cpu bound in some scenarios
not like its tons of fps though
prob single digit fps at best
Def. 4K will almost always be GPU bound with decent cpu.
you play an MMO the GPU is already been on vacation for years so upgrading it will literally do nothing for you, but for graphically demanding AAA games from the last year or two you'll gain performance
so answer is both yes and no but the answer is also yes and no no matter what parts you present and/or upgrade to
Not planning to on release, best option would be to wait for actual benchmarks. It also really depends on how good DLSS 4 is gonna be to make my decision since I’m rocking a 3070
I’m just going for 5090 for the vram. My 4080S has def limited me with 16gb
given that 3080 to 4080 was like 100% increase or smth in perf id imagine you benefit anyway
or was it 3080ti to 3090
too long ago
but it was massive gains
I love modern games but some of these titles have been rough on my 3070 like Indiana Jones and Silent Hill 2
People gotta realize even though 5080 isn’t necessarily a useful upgrade over 4080, it’s a better price to performance proposition for those who haven’t upgraded in years or are building a new pc. Same cost as a 4080S with better power 🤷🏻♂️
I dont have a 4080 so I’d be better off getting a 5080. If I wanted to get something for a better price then I’d gave to start looking in the used market
Not really interested in AMD
Waiting for there new series to drop to see how they do with raytracing
I’ll be selling my 4080S locally for a decent price. Already got a few potential pickers in the local gaming facebook group
You’ll def see some good prices on used gear
Oh for sure
I was thinking about selling my gpu but I honestly dont want to since it was my first
I want to put it on display somewhere in my room whenever I upgrade
why does Windows scale to 150% by default on a clean install?
It sets it depending on resolution your monitor has 
1080P
It sets it depending on the monitor data. If it's big enough physically, it will set it to 150% or higher.
So plug in a 60" 4K TV and you should expect it to upscale even at 1080P
Sets 150% on 1080p 15,6" laptops too 
its also insider preview so it could always be something broken
never understand why you'd willingly install insider preview
Wouldn't be the first time an LCD reports weirdly 😄
this happened on the stable build too, maybe cause my laptop has a 13 inch screen and they figure 100% might be too small?
or you could read the the sentence mansen wrote above yours
i did
then you have the most likely answer
At any rate a non issue. You can change it to 100% in a few clicks 🙂
yeh, its just curious to me
guess they go from screen size and DPI for determining the default scale
My tablet just got HyperOS 2 :D nearly 6gb update 😅
The LCD sends actual data over the cable you know.
IDK how to explain it, but MacOS seems to always have more display space than Windows,the apps feel like they take more space on the screen than the same app on MacOS
need to enable all the betas and change all the settings 
its not my main laptop so why not?
I keep Windows on this laptop so I can update shit that doesnt have a way to update it on Linux
which ones are those?
macos apps are often design around the whole global menu thing
16:10 vs 16:9 likely
also that
why would you want to waste your time to beta test windows for microsoft when you wont know half the things changed and dont even use windows as a main os and dont even know how most of the stable os even works
my controller firmware updater
updating the Windows version on my Windows install USB Drive
especially if you say its only to update stuff, why bother going on anything but stable versions
inb4 wine could just run those
well I mean answer is it's fun to lana
^
the controller updater wont work in Wine ;-; it fails to apply the update
dont want to risk bricking the controller
I hate updates, I never want to see them, and I make fun of lana for always being on bleeding edge everything, but yeah we don't all have to like the same things 
if its fun to wonder why stuff doesnt work when you only want to use it to update.. sure I guess
huh?
the benefit of insider preview is you get access to new apis to develop for prior to release, and get to give microsoft feedback
since you arent doing either, quin is speculating as to what other benefits you could be getting
I like to see the new features and whatnot
also, I said that the updater isnt working in WINE, it works fine on Windows
the latest insider build has something like widgets added for devs, or windows backup features that you wont need
but also known issues for settings page crashing or explorer not rendering correctly, so I just wonder why thats a choice when the use is to update shit that doesnt update on linux
since I assume you'd not want the updates to break or have issues
Wat, nice one MS
Rare microsoft v
My ROG Keris wireless I got like 3 years ago switches DPI everytime I plug it in and for it to be consistent I need armour crate to be installed. What can I do 😭
new mouse that has onboard memory
speaking of mice,l was contemplating trying out maya x
well my go to brands for mice are End Game Gear, Lamzu and Pulsar
ill miss my little wlmouse fabulous beast 
i want every mouse brand to do a collab like that
Vaxee is good too
Bambu Lab is rolling out new firmware that further restricts the ability to access the printer's functionality without using their software, either Bambu's cloud account or 'Bambu Connect'.
I already said the worst aspect of setting up my P1S was the cloud account requirement just to get the thing to turn on and start printing... now they're sa...
Which endgame gear mouse is good for palm grip
Looking for something with 4k polling that’s palm grip
depends how large your hands are but they don't really have a palm grip shape mouse tbh
Rip
Lamzu have any?
I do like pulsar and lamzus looks
And if either sell decent mousepads I’m down to pick one of them
I don’t have the time to deal with artisan customs
Lamzu thorn potentially, I think Pulsars Xlite v3 is a better option for palm though
I’ll measure it and let you know
if you have larger hands maybe something like the Vaxee XE if you want a large symmetrical palm grip mouse
9~cm wide ~16cm long
oh yeah Maya X will be fine
I’m not a very larger person
you'll be fine, gives you lots more options in terms of mice you can palm grip
Ok so why is discord forcing me to lower the sample rate of my microphone for it to work? I don't understand
It only works at 48k hz 16 bit
any higher it just stops working on discord
it just doesn't support over 48k hz
Oh I see, just thought there was a more specific reason but alright
No reason to use more than that anyway for voice chat
Rate the sag, i know it needs to be more droopy
I have a sag bracket but I literally havent put it in yet
I've had it for iver a month now
Slants work better than straight lines
Lmfaoo
Mostly because Im lazy
Not to put the sag bracket in but knowing I’d have to dust my pc and fix some wiring as soon as I open it

I should do that stuff today tho
The london card is very cute, and my eyes hate trying to look at gpu sag
I have a couple of magnets I’ve been meaning to put in but like I said I havent come around to opening my pc
One was from a Dragon Ball advent Calendar and the other one is from my trip to Puerto Rico
airflow blocked 😤
i'm stuck here
Not Configured to Enable, apply and done?
I is in look for a good microphone because my current one is dead.
Should not be too expensive, just enough for basic communication for teamspeak mostly and cursing people in foreign languages on cs2
Any recommendations?
Last time I got a microphone was 2016 from tbone
Radeon RX 9070 has a launch month, it’s March Not in January, not in February but March. AMD has finally provided an update. The company, through David McAfee, confirmed today that the Radeon series will be released in March. This puts an end to speculation about an announcement this week. It appears AMD has adjusted […]
sheesh thats far away
To pick at the bones of whatever nvidia leaves 
no competition is bad for everyone tho
Including nvidia buyers
Well AMD gets to experience it on the cpu side
we’re all about to lose
You know it's so funny that whoever is responsible for actually selling AMD tech is the weakest link
Tech stuff? Great. Software stuff? Recently pretty great
Marketing and sales? Absolutely dismal abysmal
Whoever that is they really should axe them fast
Haha people are reminiscing of Raja days of incompetence
I guess other than them being a lot more competitive now, spirit of mr. Koduri still perseveres
Just sack the whole marketing team
They're so damn incompetent
I mean it's not just the gpu division
Zen5 was a meme
I'll just break into a logistics warehouse somewhere locally and cop one early
They are sitting in warehouses and nobody can buy them
zen 5 also was zen 5% tho, that wasnt marketings or sales fault
Absolute incompetence on Intel Arc Alchemist levels of proportions
Yes but the marketting tried to claim it was way better than it was
AMD must be waiting for the 5070 to launch or something, those are in February right?
Nvidia is launching what, 80 and 90 soon?
never lied tho
cherry picking games to only show the ones thag got big boosts is how it always works, not sure you could hire anyone who wouldnt do that
Make good products at good prices and people will buy them
why?
lol isnt amd doin pretty well
huh
that makes no sense
It's easy to look good next to intel right now 
Is the product not complete?
or are they trying to squeeze more performance and polish through firmware and drivers?
Shops had stock already from the leaks I imagine it's drivers that aren't ready in classic AMD fashion
But also I'm not sure they are trying to compete with the Nvidia cards coming out in Jan/Feb
we have no clue why its delayed so until its launched we cant really judge if it was a deserved delay or not
Better to have stable launch drivers than the typical meh launch drivers amd puts out
Every single gen it's always the same, new cards releases, cards are overpriced drivers are bad for the first 3 months, then they fix the drivers and drop the price
Well as long as they don't have another RDNA 1 or Vega they should be alright
Rdna2 and 3 launch drivers weren't great
Fine wine as they say
I got my 7900xtx 6 months after launch so i didn't have to experience that xd
But if you looked at reddit the first few months it was just angy people
I had a 5700 XT near launch after the good reviews 
i have a tech question, a weird one
is it edible?
so i have some 140mm noctua gen2 fans but for some reason they seem to only reach half speed
Did you use the low noise adapter
no
even then they should reach 1200
the strange part is the cpu fans do reach 1500, they are gen1 140mms
its just strange.
happens in dc mode too
ig i should try it from within windows too
rdna2 didnt have any issue on launch it was mostly 1 and 3 due to different things
oh god i figured it out
i bought the ls version for some godforsaken reason or got sent them. well that explains it at least
What ls
low speed
god damn shop interface must have gotten me confused
NF-A14x25G2LSPWM
okay so what now
do i return them or not
Did you get them for cheaper?
If not I would personally
Don't return them
But then how do they get the ones they wanted 
They still push plenty of airflow at 800rpm
You don't need them to run faster... especially when it comes to case fans
I run my noctua case fans at that rpm actually
And it's plenty and quiet
We talking case fans... just keep them
but if i want 800rpm i can just run the regulars at 800rpm
Then why would you bother buying the faster ones in the first place
Just keep the ones you have and run 800rpm they'll be nice and quiet
Also this is such a waste of time to get the other ones
We're talking CASE fans
What do you run your cpu fan at?
Me?
Or just auto?
It's just a flat line at 1100 rpm lol
the point is having the option
these are just neutered for no reason
Are they the same price?
yea
Literally won't even affect your temps
Like... margin of error
Your case already has good airflow and the fans you got are plenty
Not worth wasting your time returning them all waiting to get the other ones back redoing your cable management for some extra rpm that won't even matter
But hey if you wanna waste your time be my guest
XD
i wanted to remount 3 of the 4 anyway with different rubber mounts
and i dont mind pc tinkerinh
Do you care about noise or not
Lmao
somewhat?
decide already
you know me
i cant decide for shit but i dont want them you sre trying to convince me to keep
I’d return them it wasn’t what I wanted originally 
yea
i dont see any point to them
if they had lower min rpm or slme shit or were slimmer/cheaper whatever
but it looks like they just are slower for god knows what reason
on a dc fan that would make sense but what do i have pwm for
tak be like
Puts off building the pc early because he doesn't want to waste time rebuilding
why build pc when game in mind
Then wants to return fans that work and do what he needs because reasons
And waste time
i considered it but i didnt do it
I don't understand you tak lol
maybw humans are not always logical beings
yeah it's a great cheap server option
Ye, power draw seems to be OK too... Plex/Storage/HA/immich
quicksync is very nice for power saving
Can you even have more than one drive in those.
2x2.5 and 1xm2
Not even a 3.5?
1x 3.5

its sff
It's a poor NAS, that's what it is 😄
Is it better to pay 130 for a PC that couldn't be considered a NAS at all? 😛
considering my last one was 4tb
ye
If you can't even do a simple mirror, it's not a NAS, it's a ticking timebomb.
2x2.5
We both know you're not buying two, large SSD 2.5" drives. And 2.5" mechanical drives are utter shit.
how do we know that

because that was the idea...
i dont particially wanna rely on my old drives that are 7 years old
HP EliteDesk 705 G3 MicroTower
Has 2.5"
nvm its a whole tower lol
#🐸│memes
in other news
the sky is blue
grass is green
and moumou is a cat
why would someone who just games buy this
Big number 
Manli RTX 50 Gallardo Racing: Ready Set Go DRS engaged. Manli has announced a new series of graphics cards based on NVIDIA’s Blackwell series. While the new cards are not yet listed on the company’s product pages, more details about their designs and features have been shared through an official press release. This announcement has […]

So, I heard AMD has delayed the launch from Jan to Mar month. Totally not pissing off many retailers with unsellable inventories for few months.
AMDs got to figure out what price Nvidia is going to sell at so it can sell at that price minus $50
I don't see many good reasons as to why it would be delayed so long after retailers already have units
How to kill someone's tech brain
I'm gonna be using a Fujitsu Futro S920, 2 core CPU as my server for storage and other things locally

Interesting choice
I know
Gonna attempt to shove in 8TB of HDD storage
Make it my personal, local NAS
Is it a thin client?
yep
Fujitsu Futro S920 ThinClient with GX-222GC
Low power, but pretty much a good enough mini serv
ew debian
I had nothing but problems with ubuntu, I'll never touch it again
Removing libraries which are in widespread use from repos just because, freaking mesa has to be installed from 3rd party repo, and good luck with getting anything recent there 
yeah that baffles me about mesa
Because people see LTS being referred to as "stable", and that's what they're going with
Despite the fact that "stable" doesn't really mean to them as to people who know more about tech
Heck, even Windows is now on semi-rolling release, just like Fedora
LTS should be used only in servers, never on personal PCs, otherwise you get outdated packages and libraries and everything breaks 
Debian immutable would be nice
Of course Debian apologists would instantly flock with "Debian is around for so long, it's so stable that it doesn't need immutable version" 
thats not what immutable means i think
guys gateron vs cherry mx vs akko vs outemu vs razer (RED SWITCHES) please help i need to get the best
We don't know much about mechanical switches
Maybe folks over at #🔧│keyboard_modding 
Thx
I use debian 12 as it's been an easy ride and I haven't actually gotten any problems with it
I mean, I only use it as a server
not as a daily OS for myself 
#🐸│memes ?
So, TeamSpeak is making their comeback tomorrow eh
Other than the far better chat quality though, is there really any need for TS to exist over Discord lel
I still see TS as the go to for tournaments, but for the normal people? TS is just yet another client you don't need, Discord integrates social media and communications in one package
But maybe I just hate having too many apps on my PC cause if it does one thing something else on my PC already does, I don't need it
I use both of them but inly bc my friends hate discord xdd
Was Kepler always a dumbfuck
https://x.com/Kepler_L2/status/1881445437267431566
Honestly just shut down Radeon division at this point, what's the point of making GPUs if you're not even going to try to compete?
Twitter does annoy me with the amount of braindeadness, but I don't see the point of Bsky, the same thing but in the left wing flavour
I'm just a redditor at this point 
And who the hell are they apart from being random Twatter account? 





