#💬│general
1 messages · Page 373 of 1
i almost threw up when i bought my gpu but i guess i grew up frugal
Damn
better fresh from service and support I had express delivery of glass mats it was delayed for 2 months it was so long that the guys managed to tease something new
yeees
what country are you in
Russia
I buy this through AliExpress
that is, they don't even sell it in my country
it's not a fact that I won't be deceived
I literally don't know what I'm buying But I'm glad that AliExpress can return my money if anything happens
I really hope so
they are very reliable at that
Well, that's how I think about whether it's worth paying $1,000 for the case
i remember when i boughht like a 20$ item and it showed as delivered but i didnt get it but went support and got refunded fully and they said if i get it i can keep it and 4 days later it came
My PC is cheaper
have you seen my setup haha
nop
Wtf
haha
no no I will buy the most expensive peripherals in the world and only in the very end I will buy a normal computer
Uhm what do hou even do with the conputer
no no that would be too easy
You dont seem like a gamer
I used to play on it, now I work, study, and it can't handle games anymore.
Glass pad ontop of the cloth pad
I play computer only in my club and I am a cyber sportsman but I don't play at home
Just save it as a emergency funds
aint no way you want to drop 1k on a keyboard case instead of building a pc
Iust incase you want to travel or something
y artisan
No, you should just wait a few months
yep I'm a maniac
Especially if you're already familiar with parcel forwarders, you could save half the price just buying it direct
I want to get an ow60 idk when they will be available though
by the way, do you want a joke, do you know what switches are in this keyboard?
Which one?
Holy 420 euros
on the floor?
Is it made out of gold
sure
Possibly
s
this made me chuckle more than i should have 😭
tts magnetic zodiac
This took me a minute haha
whos they haha
auto correct mb
ah
Osu!!!
Just put my keyboard in the box
wats up
I paid about 15,000 rubles for 70 pieces.
normal price
no
Is that like 50 euros or sonething
150.....
ayo wtf
lol
i found russian eathan
Tamikk…. you shoulddddd just get a financial advisor at this point
It's not my fault that everything is so expensive in my country
and in general I am a doctor I can
i wouldnt say that
Fair okay
its more where you go to spend the money
you are rich
no no
im a 2nd yr student in college in cs
rich milioneeeer bomboclat
Does russia pay well to doctors salary
Ooh nice business owner
It's not funny that I'm still a student too
Is that with or without loans
I just work at the same time. I'm so tired. 
🤑 just spent £600
On
Nice on what
what is this my translator didn't translate this word \loans\
Debt
PVC with music in it
do you mean credit?
Yeah
Debt is when you owe x money
no no all by myself
When you take out a loan you have debt to the person you took a loan from
credit is evil
bye ✋ going shower
Enjoy your steam!
Lovely to meet yall
Us too
/good talk
hehehee
actually its HE not hehehee

What's the best way to make a toggle (with RGB on/off) to mute my microphone in wootility? Idk why im struggling so much to figure this out
U cant
Can you do it in wootomation then?
Map a key to an extended function key (f13-f24) then bind that in whatever software you use as mute toggle or whateer
Can I make it so that F13 for example is a mic mute toggle system wide and then bind that in wootility?
Well depends on the system, I have such a setup but I be Linuxing so it's easy to do fancy crap like that
True
Trying to set it up so that I don't need to install any software on my work pc as I switch back and forth all the time
Yeah no matter which way you do it you are most likely gonna need software help
That's what it's sounding like. Oh well, thanks for the help!


anyone know why my rgb is just off? i havent touched anything
its just off and i try to like UP the brightness and itll turn on and immediately fade out
Check if rgb sleep is on
If u use other RGB controller apps try to look in them
i dont think i do ngl
how do i?
it just turns off even if i use another profile?
Open wootility and go to settings
Its there somewhere
Im not at my pc
i turned it off and its still turning off
need help from a german cant type ä ö and Ü
Check ur windows language

f...
Sometimes wootility just doesn't seem to be able to get what keyboard layout you have
so i just need to restard
Your ability to type ä ö and Ü have nothing to do with Wootility.
That's your keyboard language of choice in your OS.
alr wait
brave is the usual offender here
thank you guys now i can do it
Tbh if i change my language when wootility is open its not updating, i have to restart wootility for it to read what language my windows is on
i did
operating systems in general are not good at dealing with multiple keyboard layouts and switching between them in my exp
one thing I like about the 80HE is that it's easy to disassemble
and that the firmware is pretty good
Never had a problem with this, last 10+ years, if I installed the OS myself (windows/unix).
What can be a problem, are programs that fixate on the current os lang at install or language selected at install.
I swap kbd layouts / os language all the time
i think the problem I have is that on windows i have two layouts active, NL-ISO-UK and NL-INTL and the hotkey to swap between them is alt+lshift but at the same time i press alt+lshift a lot because i press alt+lshift+tab a lot when alt tabbing but thats just a theory. i could probably fix this
use win+space instead
and disable the alt-combi
windows is degenerating, I agree.
well that option is certainly buried somewhere
Open the Windows 11 settings "Advanced Keyboard Settings":
win+i > Time & Language > Typing > Advanced Keyboard Settings
Click the label named "Input Language Hotkeys" to open the dialog with the caption "Text Services and Input Languages"; it has two tabs "Language Bar" and "Advanced Key Settings".
The second tab "Advanced Key Settings" has a frame labeled "Hot keys for input languages" where the keyboard shortcut for toggling between input languages can be customized.
To avoid the windows GUI, the following command-line opens the dialog "Text Services and Input Languages" directly:
rundll32.exe Shell32.dll,Control_RunDLL input.dll,,{C07337D3-DB2C-4D0B-9A93-B722A6C106E2}
i didnt even know about win+space, why are there two shortcuts for this xddd
And yes, to disable the alt-combi, its hard to find, but use the method I just showed u
i fucking hate how it's shift + ctrl to change layouts
oh theres 3? :D
Can't remember where the win+space thing is located
alt+shift to change languages, ctrl+shift to change layouts within the language, win+space is just a newer hotkey with win10 and up
the alt-combi is bugged. sometimes it does nothing
no there is only 2 Alt+Shift and Win+Space
you know it's good when it's one of these dialog windows
Any wooting team support here
Pick the category and issue you need help with, and we'll guide you through the process.
yeah you click "advanced" in windows menus to go back a windows version
I just want to ask about ow60 adds on?
Just ask normally in other words. You don't need to ask Wooting staff.
if you click "advanced settings" enough times you'll end up somewhere in win95 dialogue boxes
And maybe ask in the community support channel or game support channel
Any adds-on for sale? Foam plate screw
disable key combination, add taskbar icon, perfect
dont ask why my pc is running at 85 degrees
I've got a little dopamine high.
VBA: Eval() sometimes corrupts the compile cache leading to undefined behavior / crashes.
Wrote a tokenizer, LL1 parser and stackmachine in a couple of days.
Now we can eval at will 😄 And the code is simple enough and concerns are separated, so it can be maintained by a junior dev.
All fun and games till it's per app, and you can't select the menu while the app is active 😄
ah but i almost never need to change my keyboard layout ^_^
im also a windowed mode fiend
Or could share the specs of screw, plate file. The some screws that I received from ow60 for tie plate and pcb is not tight.
I agree. It would be nice if they'd gathered all specs on one page. Called "specifications", and not spread them out, so you have to ... click-click-search-click
Same goes for youtube ... never know if it's up to date or outdated
why is it running at 85 degrees
hi guys!
And some of the newest videos linked here, are not visible in the youtube > videos section
which ones
floor not level
Checked videos when I bought the 80he a while back. Didn't write them down.
Had the same experience when I bought the fullsize HE TWO - outdated videos - had to ask for links here - but thats a long time ago
oh yeah, some are unlisted because they're explicitly for the quickstart guides and uploading rapid fire tutorials and publishing them all at once when we release a new product that only pertain to one product clog up the videos page and sub feeds
public youtube videos should be for general tutorials applicable to all products, product/company updates, announcements
at least thats the idea
I've said this before: Organize and publish, to minimize support requests.
Every time I am here, I see people asking basic questions, that should be easy to find on our own.
this is way out of my area ;)
you underestimate the unwilligness of ppl to do basic research
i wouldnt be surprised if someone asked how to tie a shoe in general Chat
the playlist organization seems good and includes some unlisted videos but i should get the video guys to do an audit of them lol
ty.
does the bunny ear go under the tree or around it?
Worked with software development (including embeded SD) for almost 40 years.
When I create code/docs, I always strive to make myself obsolete.
It means: easy to find, easy to read, easy to modify, easy to test (docs + code)
put on the bunny ears
forg
thank you good sir
before wooting kb i was a mere peasant but now with wooting kb im still a peasant but i have the will of the gods in my hand
what's an takmind good sire...
its Tak
okay i tried to think up a tak-including pun name but all of them are ass so im not joining
yeah this was this first one
tak.
sleeping is for weak
yall got any good recommendations for a dash cam that i can pick up before prime day is over
not expensive either, like $70 or below
can i change ! to be an different char when i shift press 1?
l
no u cant
its binded to windows
when is the wooting 60he v2 releasing >
q4 this year
damn, so no specific date ?
no
aight
thanks for confirming
wow
Custom keyboard/language layout in the OS
One travel one for at home ? Thoughts ?
Is there a way I can make my keys feel normal again couse I pressed it so much the plastic coating is worn off so it feels greasy
So I've got a question. There was a stream yesterday, where Clader talked about a potential hypothetical refresh/new of the Wooting Two HE (a wooting full sized keyboard)
If such a refresh, remake, new keyboard was to be made, how long are we talking? 1-2 years from now?
I'm just wondering If I should get the current one now, or if its worth for me to wait that long and get the new one/
What about the 80?
When you say worst, is it that much different from the 80 HE?
Explain
So I could technically buy the Two HE and put in the Lekker Tikken switches?
Alright
Thanks for all the answers
Imma go to sleep now. Its 06:25 am, been awake since yesterday lol
where can i get caps like this
which ones ?
top
i can link you if you dm me
how do u disable windows key with hotkey

howdy pals! i think i'm just being dumb so could anybody help me out a moment?
i just got my new keyboard but i've tried every port and it will not turn on 
hmm
it is tricky
i'll check
hey chat
anyone else got the wooting optimum and friction fit their module? wanna know if ur usb port lines up nicely
i can't seem to see it in device manager
where would i look?
Anyone got a quote to cheer someone up?
should still be a keyboard
or usb device/hid device
"wooting restore" is what it would show
i didn't see it under keyboards
hmm if it doesnt show up at all it might just be totally dead sadly
contact support for replacement ^^
So, I may be cooked.
hi cooked
ok so kinda breakthrough, i connected it to one port on TOP of my computer and it gave me the windows popup that it didn't recognize the device and it might be malfunctioning
which means the cable works i suppose?
are there any other keyboards that have a split spacebar
countless amounts of them yes
Nah, but when a company create a low profile switch that's compatible with wooting, you can almost make the same thing with 2he
wooting will help your mental health
trust
Real
thats odd, wonder why the usb ports on the mobos dont work. Ig you can try to initiate the restore process in wootility and hope it does sth?
it didnt
youre beyond saving
My 80he is here later

wooting strapon or strapoff
I have aluminum case right now so I don't have the strap 😦 But it's still attached to the original (empty) case.
whats the difference between ttc kom vs ttc pom kom vs ttc kom rgb?
if i dont care about sound or rgb and only want best for gaming which one should i choose
No such thing as best for gaming. The switches all perform identically, and it's all about feel and sound.
yeah i mean the best feel for movement in such games like valo
so the pom ones only make sound better?
Your best will be someone else's worst.
but whats the difference about feel between those 3
Only difference is material, POM version will be smoother and will sound a bit better than RGB version
None of them are the best sounding, but if you care about stem wobble then they are good
Yeah, they are dry
actually 3 small dots at the bottom
has anyone in europe ordered TTC Elf King switches?
wait they come lubed? not buying, smhsmh
is wooting good for r6]\
and how big of a difference would if be from going from a keychron v4 to the wootiing
also is it usaully in stock
hmm
@cinder egret tu crois tu peux m'échapper ptit trdbl? tu crois mentir c suffisant? sale con sale trou du cul tu t'affiche et tu sais pas comment réagir quand jte met des gifles virtuel
Only English in chat please 
yeah mb just was talking to my friend rq
I wish I could order an elf
Apparently you can order them through ttc official site straight to Europe. And shipping isn’t that expensive, for me it was around 10usd
Um
Oh I misread
Too cold in Poland today
, no switchy blanket is torture 🥀
It is too hot today
Where?
Did you order sample set? I heard you can ask for them?
Meanwhile me
I have 14° in Warmińsko-Mazurskie
Got it from their giveaway
Aaaa ok, do they feel the same as ttc king apart from sound profile?
I would place them on same tier as owlab ti but with little bigger wobble and deeper gateron jade sound
Oh I see! Thank you!
Thats still too hot temperature
Hell nah
Specifically if comparing to last week
its intentional to teach zoomers patience
more keys
I use 60, 80 and two and other kbds.
I have a 60HE and a two HE also
Depends on what I am doing, feeling like and/or if I need to transport my kbd.
80 hits the sweetspot for me
60he crazy for fort or nah
well it is, tenkeyless literally just means without the numpad
No, tenkeyless = ins, del, home, end, pgup, pgdown above the arrows keys. at least that's what I meant.
doesn’t answer my question
The 80, no matter how I setup the keys, 2 of the keys are ... missing - not in their expected places.
I mostly just use pgup/pgdn, home and delete on those so its fine with me
yeah you only really use prtscreen, insert, delete and some pos/home occasionally these days
who uses scroll lock? it doesnt even do anything in 99% of software
arrow cluster is what I missed the most using the 60
I use all 6 keys all the time. including ins.
in my close to 40 years of computing I never used the insert
Started coding the ping-pong consoles pre-1980, started being serious with the ZX80.
sth like prtscreen, ins, del, home/end modtap, pgup, pg down fits on 6 keys
no problemo
finally someone more ancient than me in this chat full of zooming fortniters 
Those units had the worst typing experience ... ever.

For example, some of the consoles, if you mis-typed, you had no ability to backspace.
that was intentional, programmers back then weren't allowed to mistype
But the keybaord was ... caused the typos.
maybe a north korean programmer can relate
you type a lil piratesoftware and your whole family gets send to the gulag
red star os > every os
The shitty keyboards, was what motivated me to create a tcp client with command line editing.
Back in 1990.
ywp
kids today thinks all the good ol keyboards were badass mechanical switch ones but nope
they were predominantly trash 
I didn't have the money to just buy keybaords for evaluation back then 😄
it's called a ribcage mr frog
I had membrane kbs for most of the 90s
Most of my money was spend on books 😄
if not the entirety of it
Yep, the membrane ... couldn't recall the name.
i think i need cola
Shittiest keyboard tech ever.
cola can save me
some brands did make okayish membranes though, like keytronic
Opened instagram and the first thkng I see is; "texas man arrested after using roblox to plan terrorist attack"
but they still had garbage multi input handling

yes your honor i was trying to play counterstrike mod for roblox
The first real good mouse I got, was the Intelligemouse 3.0. Even when I thought I missed my shot, it was hit 😄 Had searched for years for a good mouse.
The first mouse that didn't spass out if you flicked 😄
keyboard wise, it was the ibm noisy big heavy thing.
Expensive as hell back then.
The ibm keyboard was immune to sugary soda spills 😄
It had an amazing endurance/quality.
Never understood the cherry thing, as all the cherry switches I've had, became buggy very quickly.
Layout, mounting, light bar, 8k hz
my mouse for like 10 years
and lmao rare it was everywhere in the 90s
you couldn't escape it
the later versions added a scrollwheel 
probably
they've all gone ultra yellow now too
Before the Intelli, I bought cases of .. cant recall 10 or 20 mice, also ibm, ball mice, that when new, you could flick with. They didn't last long though - hence buying a case of them.
the ms mouse was virtually unkillable
except the goddamn switches/scrollwheels break
yep. usually it was MB1 that broke.
never had issues with the side buttons or wheel.
can't recall either breaking for me back then
from what I've heard most companies underpower/volt the switches in modern mice
so they must be perfect mechanically or they'll start to misregister inputs
Will wooting have like trade in? Like phones (I would give wooting 60he+ for some discount for wooting 60he 2.0) 😭
no
pawn star calder
prawn star
selling it is your best bet if you want some money back
it's not a 2 bucky logitech, someone's buying it
wondered why my pc was kinda warm
wootility was hogging 10% cpu even tho i closed it 
Yeah it's an ongoing issue with the debugger. We're trying to quash it, but on rare occasions it keeps the app going and eats up CPU time.

From what I understand this was an external change, so best we can do is try and mitigate it shortterm.
For the holy 60 case I have done tape mod for the 60+ module do I have to screw it in or I can just drop it in

just got mine and its insane how responsive it is holyyy
gonna take a while to get used to 😛 but i am very happy with it
60%
TKL has more keys. That's more of an 80HE for the record.
https://wooting.io/wooting-60he-quickstart#shortcut
But yes - FN+5 is F5 by default.
Cheers bro 😂😂
Is it normal for my 80he lightbar to be chipped?
Chipped?
Yeah it’s like got a deep ish scratch on it
A photo might help cause uhh... yeah
1 sec
Looks more like a speck of plastic underneath, no? Can you actually feel it?
In any case, reach out to support and they should be able to help.
I’ve used my flash on it it’s definitely a scratch
It’s fine it’s just it makes the lightbar look like it’s got a dim part on it
Il contact support though
Ready to pack 🥀
It IS the weekend after all.
i have sinned... i am using a razer keyboard
Ikik, I just NEED to try it
Anyone mby know about if temu glass pad would be good to test if u like glass pads? As its would be first glass pad if I like glass pads i would buy wallhack one
yes
You got mby any recommendations?
Ah okai
What mouse skates should I use for the superlight 2? Bc everyone says u need 100% mouse skates if using glass pad
100%?
(I don't know anything about mice don't ask me)
((but do buy a cheapo chinese pad first because realistically it's all just glass and not gonna be any different whether you buy a 150€ pad or a .15€ pad))
Nah like u really need to use mouse skates they said idk why no mouse skates wouldn't work just original should work 😭
who uses a mouse with no skates

Like superlight 2 got rubber padding ? Idk about mouses fully 😭
?_?
Idk?
these are mouse skates
what are you talking about
anyway go to #🌐│pc_gear to ask the nerds there if you want, I'm just an idiot saying things to amuse myself because I don't really care about mice
I have a catpad and just a stock mouse and it works 
These
yes these are alternative aftermarket mouse skates
R these needed for better experience as first or I should not care about em?
don't care about them for now
just buy a glasspad and see how it is, you can worry about the ten million aftermarket skates afterwards
And about sleeves?
another moneywaster if you want to spend your money on one I guess
just try without, you can buy more stuff later if you need it
Oh okai
cheap enough to just try, or also buy a sleeve from temu/aliexpress while you're at it
can't be more than couple euro
asked for glass pad
I just sent example sorry
Even worse
M
wait then what are glass skates for
if you can't use them on anything
You can use them on cloth, but doesnt mean its good
After sometime they get scratched and damage the surface of the pad
There are fast PTFE skates for example Xraypad Jades, no point of using glass abomination
i think the whole hubbub about skates, mice and pads is already pointless but then to invent a skate that is just worse than what comes stock is funny
Wait for Tekkusai Singularity restock and get a real glass pad, I doubt you can find usable glasspad on Temu. Singularity costs ~$50.
For a glass pad you need hardened PTFE dot skates (Xraypad Obsidian Air, GHOSTGLIDE Cyclones)
Glass pads are different
glass pads are really good, but high maintenance
Yeah and sometimes annoying too, you can feel dust/hair on the surface every few minutes
how are they different?
what shf said, and they also chew through mouse skates
they offer unparalleled smoothness and speed (the good ones)
but at a price
can feel all the dust and stuff on them, you need to replace skates regularly
also some people can't handle the surface on their hand, so a sleeve might be necessary
Surface, durability
yeah one dink on cloth pads is that they get dirty immediately
and the surface goes unslippery after you wash it a few times
Depends on the glass pad. If the glass has shit coating, you can feel degradation after a year (Razer Atlas), GLSSWRKS coating is goated tho
oh yea I forgot to add, the good ones virtually never degrade lol
When will that happen
2-3 weeks
Hey all, I’ve just been through my box to put the tag on that comes with the 60he. Turns out I didn’t get the silicone rubber part and screws. Anyone know how I can get them? I’ve opened a ticket on wooting site but no reply yet
you get them by opening a ticket on wooting site 
Yeh… done that already a few days ago, no reply as of yet but I’ll hold out and hope they get back to me 👍🏼
yeah it'd be a low-priority ticket so you might wait a few more days but they'll sort you out eventually
Yeh thank you 👍🏼. Do you know if I will have to pay for it or pay for postage etc?
It can take 1-2 weeks, they will get back to you soon
Thanks man

🐒
@wispy marsh
That’s adorable 
flop flop 
Someone know how i can talk to the Support
at the wooting hub
Like Email or talk?
email only.
LF BUTTERFLY WILLING TO GIVE A CHICKEN JK (NGF!!)
what
who wanna chill at the wooting hub
They didnt answer since a day
then wait longer than a day
You a User right
indeed
Haha why u write like a Supporter
cause i'm trying to help you
They should make u Supporter
it is the weekend soo support not gonna email u till monday
Yes but is there a chance u can answer my question
Its about my he80 what i orderd
dont ask just ask it
Wym ? Sound like unfriendly do i take ur time or what
just write ur question dude
U have a Founder role i Support ur marketing i buy it. Dont be like that
just write down ur question and im gonna try answare u
Thanks . I orderd the 80 in german iso but its not in Stock can I change it to the asi because its avaible and I would not wait 1 month only like 4 days
me and twin so tuff🤝 ✌️
put ur order on hold and request a refund
and reorder ur 80HE
So like i cancel?
yeah but u have to wait for the refund
Okay thanks
absolutely!
Guys can someone build me a profile with the mouse function my mouse stoped working
you can just use your keyboard to do everything though
not possible
Yea that’s all I need to I can get myself a mouse

maybe
people jumping to conclusions way too quickly with the phantom presses
What’s that
my high comma key is stuck, it displays 4mm in wootility and it only deactivates in tachyon mode, i even took out the switch and swapped it and even with the switch out it gives the same result. also the key is not physically stuck
what do i dooooo
Any dutchies or someone else here that would review an ad for a wooting two he?
common issue going around rn where multiple inputs are registered with a single press
but its likely people are just having trouble with beta firmware, and they just have to go back a version
but how tho, is this my problem? and why does it do work inj tachyon mode
eh what
that seems weird, take some images and maybe try making a ticket
yeah i mailed to the support team
thanks tho, i just think its a lil stupid i pay 190 euro for a keyboard and one key is just broken.
yeah idk
i dont get whats going on, ive had this thing for months and it never acted up
i have a wooting 80he btw
ohh i have 60he+
but then recently my "e" key has been registering multiple inputs, switching switches doesnt do anything, but im gonna try going back in firmware
do you know how i go back to another version ? maybe that works
im hoping it is at least, if the pcb is damaged somehow on only that key im fucked
exactly I hope mine is ok too
If your Wooting keyboard starts acting up, don't worry—it doesn't always mean it's broken. Often, the issue can be resolved by simply restoring your keyboard to its default settings.
✨ Follow our socials! ✨
Discord https://discord.gg/wooting
Twitter https://www.twitter.com/wootingkb
Instagram https://www.instagram.com/wootingkb
Customer ...
i think its in here?
okay thank you
not sure**
oh yeah I already did that and it didnt work, geuss im just gonna wait for a response of the wwooting team.
yeah sorry i couldnt help you mate
nah no worries, it was worth a shot
Does anyone know who I could ask in the team for discord server related stuff?
In what sense do you mean Discord related stuff
#1141096226884956181 would be the place to start with whatever the issue or suggestion may be
nah, more questions than issues/feedback
hello gamers
I would just reach out then if you dont want to post it here
yea but I dont wanna dm someone randomly
thats why Im asking
Yes why I said reach out, you seem to want direct contact.
ig Ill ask when i see someone from mod/team in chat, tysm tho :)
I am a Mod 

ahaha sry
idk why I was looking for the purple
Can I dm u then?
does anyone know if theres a discount code available rn
If you already bought something
Its the same code for everybody, its account tied tho. You get codes when you buy Wooting products
ohhh ok thank you
Feel free
Just confused on what needs to be asked in a DM that could not be asked in here.....
Usually never is, just for that person
lol this must be a common situation
Some people are shy and dont like to ask in chat... idk
has anyone had issues with the 60he+ with the lights going off and it dropping inputs for a second?
fire username
Are you using stock cable? If yes then try other port
Port Fixed it, asus are a bunch of a holes and put 10g above 2 ports when only 1 is actully 10g
If it happens again, lower RGB brightness
We do not facilitate trading or reselling in this discord, please use alternative platforms
is this a frog

guys im back again looking for assistance
anyone know how to fix cat piss smell from keyboard
Wash it and don't let your cat piss on it again
usually first step is to stop your cat from pissing on it
ok well too late
its on the back of my keyboard
😭
wait did it really.....
yes
it peed like on my desk and it seeped under my keyboard now the back ofm my keyboard smells like pp
but its cat pee so its way worse
ah just the back
So wash the back then
^
i drowned it in isopropyl alchool
seems fine now
Why is your cat peeing on yourd desk
I'd be more concerned about the cat than a keyboard.
i mean, cat behavior
doesnt seem that off
idk but im getting rid of bro
that was lowk my last straw
Peeing on a desk doesn't seem off?
i am not emotionally aattached enough to keep this guy
i have 3 litter boxes downstair too bro 😭
But usually stress or illness.
So maybe check on the kitty.
It can also be their litter box is not cleaned regularly.
But you said you had 3, either way it's not normal behaviour. @woeful stone
i mean it heavily depends on the context
definitely not fear or neglect i spoil tf out of bro
is the cat young, is the cat new, was there a move or big changes in the room recently, etc.
ive had him for like a year and hes always jus been a dick
Hence stress etc
he like a year old no changes at all in my room ion but this is like the 7th time 😭
7th time?...
def not sick or whatever cause hes been doin shit like this since i got him
Oh.
Is it sprayed or neutered
yah that's not so normal anymore
not neutered so probably a good reason why
tbf im just not cut out for owning a cat its way too much patience required, i tried for a year but its just too much 😭
prob
all i know is it fuckin reeks 😭
I've gotta be careful because cats are like a holy thing to me haha

i like cats usually but this specific cat pisses me off
I don't believe cats are "assholes" for no reason.
dude is a master of ragebait
indeed froggers
idk why hes an asshole but its not me
unless hes pissed that i give him treats often and buy him random shit all the time
it lowkey is where i am
Is it a male?
yea
Get that sorted regardless of the gender.

Well ye but I think in general makes are worse no?
i do fw having a cat its just the cleanup sucks
I wasn't talking about the personality...
There won't be cleanup if you do the right thing.
Ah
well i didnt know that ive only owned amphibians and dogs 💀
Cats are pretty low maintenance.
and my dogs were alwayus well behaved
Especially compared to dogs haha
Are your dogs neutered?
Have you noticed that your dog pees on things? It's the same thing.
id say the severity is alot different and my dogs always just peed on like training pdas
But yes, give the cat a better home or get it sprayed.
im still debating if i wanna keep him thats the only reason i havent
my brother gafve him to me
My main point was dogs do the same thing but because you walk them etc they tend to mark territory outside.
hes like a really idk if its rare but hes like a interesting breed of cat
I don't mean to come across attacking.
he looks like a leopard
just spray your cat with water
probably bro
I suspect the breed you have, I just can't remember the name.
he looks sick tho
its not gonna damage the cat at all
Please don't fucking tell me it's a BENGAL of all things.
i have a lil water bottle for my cat LOL
That's the name
its a bengal mixed with a i forgot
neb something
Bengal cats are high maintenance haha
It's probably also not getting enough stimulation
Bengals are hybrids, and depending on how many generations ago they were fully Bengal, you've got a cat shaped stick of dynamite with all of the personality traits and excessive need for stimulation and space. Failiure to provide that is going to be miserable for both parties.
o
Kinda like a husky
It's like keeping a sled dog indoors.
bruh i ain know i thought it was jus a cool lookin cat 😭
I wouldn't mind a Bengal, I think I'd exhaust it with all the love and nagging id give it 🤣
issa mix of these two
Oh noes
You would be surprised.
literally gets the closes thing to a big jungle cat
confused why its high maintenace
it was cute 😦
i aint know i was adopting a jungle cat
spray with oil and cook it
(joke pls)
usually wasnt an issue cause i only had dogs and they were like more well behaved so my family never went for neutering or whatever
ill def figure it out tho
I get where you're coming from.
We've given advice and hopefully you follow it so both kitty and you can be happy.
i didnt even know what it was till he said it 😭 i just thought it wa sa cool looking cat
If not there's no shame in feeling overwhelmed and needing to re-home it.
spaying is what you do to females and neutering to males. you spay female pets as there is general health benefits and some behaviour benefits. neutering isnt really necessary most of the time unless you let your male dog/cat out then its sort of good for population control in case they go wild on a female dog/cat
i just didnt know how important it was
he?
mf would be an angel then jus piss on a wall or sum
I'm extremely passionate about cats but attacking someone isn't helping the situation.
oh marking territory
its a male cat
terretory?
Yay
Territory
teriotitrial,a\
trilili tralala
i mess up when i try to call someone illiter
fuck i forgot how to spell it again 💀
yea
politie?
pilicia
You mean popo?
Oink
I played with my cousin's kitty so much she was falling asleep as I was playing with her.
It was adorable but she was only a kitten so they only have so much energy XD
Yes XD
Ants are assholes
Do frogs actually eat ants?
Maybe I should get one to deal with the ants I have.
Annan dag, annan frosk
samma skit, annan dag
Ah nah they aren't like that, they are always on their own or close by.
And I say close by loosely
I don't think I've ever seen ants in lines in my life haha
I've seen swarms though
At my mum's we used to get infestations, literally you'd wake up in the morning with hundreds dead on the living room floor
As we put ant killer down
We had to pay a fortune to seal any gaps but outside still has the odd amount popping up every few years but way more manageable.
In my current house they got into my kitchen, however I either killed their leader or they are smart enough to understand why loads died whenever they got close to my backdoor lol
Endå ein dag med froskar på Wooting tenaren
It's like there's an invisible line, after I covered the backdoor they rarely passed it, even when the poison went away.
🐸
Weirdly I saw a huge one once.
Like it was really big, is that a like higher up one?
Like how bees have different types.
Still, it was a big ass ant.
Don't think I've seen one that size before.
It could have been another bug tbf
I thought ants have a leader?
Ye
But I know they keep hidden.
So it wouldn't be that and there were none surrounding it.
Isn't it queen's that go into other colonies and destroy other queens?
And basically turn that colony into zombies
Ye I know that.
But I'm on about when they invade other colonies.
I know some ant breeds are more aggressive.
Ye
I got mixed up with zombie ant term
I meant they basically force them to work till they die or something
Using the old queens pheromones?
Or something.
I might be mixing up different species of bugs.
Not sure, however ants are incredibly fascinating but they can piss off when entering my house.
Ah i see.
Nature is lit
how late is late july
20th onwards
Hello does anybody know where can I get the black strap?
I’d love a wooting keyboard with 4 macro keys on the left and potentially a scroll wheel?? Any plans for more feature rich layouts
there's gonna be the knob thingy, i hope there's more stuff like that coming


Maybe it's not a thing now but the spiral was a thing once.
👀 👀
this shit would use 40% of your CPU on corsair ICUE
But it only looks good because of the camera and translucent everything.
fingerprint machine
Also this, it's not remotely worth the cost as everything is run on the keyboard itself not via software.
Background services are coming though.
corsair ICUE uses so much cpu
I know.
like your PC's CPU
no idea why that's acceptable whatsoever
can't wait for my 80he to come 😼
I'm not a fan of anything that relies on software to function.
The only thing I actually do this with is my lg mouse as I like my profile switching, however my onboard memory is my desktop profile in case.
I've very much been enjoying the background service features with the 80he 👀
does it not destroy your CPU
Not really.
Its nothing like the video etc and is optional
Eg controlling the led bar for stuff.
dude i've been using these fucking
mx silver speed switches
for waaaaaaaay too long
they SUCK
Its exclusive to the Alumaze case I'm afraid.
are the phantom press issues fixed on later batches
seen people having problems on a batch that shipped around last week

K70 TKL speed silver variant?
yes
same, mine broke before i got a wooting
how did it break
up arrow from GD
GD?
Geometry Dash
actually I liked them, they were just breaking is all
which is why I got the Geon Raw HEs
i like short travel switches
bro i don't understand how so many CS players are using logitech keyboards with their romer G switches
i think those feel so fucking bad
bc logi sponsoring the Esport teams
@dusk musk FWIW I ordered one, received it last week and it had phantom presses. I sent it back and my replacement has them too but not as bad. I have no idea if it's a sofware or hardware issue but the first board I received was tested on multiple PCs and cables. The new one I havent been able to test beyond my PC and laptop, and it goes away if unplug/replug constantly vs before when it was immediate
agreed, I had a romer g board and they were awful
key binding was so common even when they said it would happen less
worried
Yeah it hasnt been a great experience but support has been good at least
Yes it sucked lmao
The first was most keys (it seemed random), would be like 3 - 10 keys at once. Would actuate so high random presses were unavoidable.
This one it seems it's a few at a time aside from a few moments where it gets crazy. Actuation has been below .25 for the most point. Usually it "gets better" by unplugging/replugging but often it will also fail to connect.
It's a pre-built zinc alloy in white.
Oh and this has been the case regardless of polling and brightness, I should add
ya i ordered a prebuilt 80he zinc alloy it should come late this month
hoping it's part of a diff batch
@drifting spire can i ask what batch ur kb was
saw this in a diff discord
They need to check the usb cable they are using.
Or if they are using a usb hub
I preordered the 80HE Black Zinc
Was pretty cool

My main until that split spacebar 60HE v2
the split spacebar looks so cool
agreed
If you are experiencing your keyboard pressing random keys and opening programs, then you came to the right video. The issue is usually caused by an instable amount of voltage entering the board. Follow along to see what you can do about it.
➤ Follow our socials!
🧑🤝🧑 Discord https://wooting.io/discord
🐤 Twitter https://www.t...
Send them this.
i wonder if the issue is mobo dependent
@dusk musk I mean I received my first like 12 - 14 days ago, and the new one I just received 2 days ago on the 10th. Is there a way to check? I would think the same batch given the timing though
And my first I was able to definivitely narrow down the the KB (tested on like 5 good PCs and with like 20 different cables). This one have only been able to test on my PC and laptop, which should both be fine but who knows. And my cables at home are all longer than stock.
So with the new one I'm not returning just yet, just waiting on support to see if I should try anything. They might want to send another stock cable because maybe my cable is busted, I can't rule it out yet.
It actually can be yes.
But only older Ryzen ones.
B550/x570 during the early days had huge issues with the USB ports, especially when updating.
think u can put ur order # here
You can and check the hub
Access and edit your orders, connect your discord, and manage your Wooting account.
i'm seabass-3
I need to sleep
wonder if they're going to do extra qc on this batch
It's 3am and I'm awake at 7am
its 4am here 
Unless I've been living under a rock there shouldn't be any reported issues with cables?
On a large scale I mean.
most likely there is an issue with the sensors
idk it's just something i've seen enough times for it to be concerning
The spamming?
w/ the batch that shipped 1-2 weeks ago
Oh
yeah phantom presses
#1019755933959733258 is full of the same threads
Holy
both with the 60HE and 80HE
Oh, hmm.
most likely the HE sensors having some issues 
it could probably be like <5% failure rate
would this be like a board issue or switch issue
all HE switches are just magnets so no
and the HE sensors are on the board
I've asked about it.
I'm going to assume they are aware based on the responses, since it's the weekend I haven't really noticed anything.
tho there are only 5 threads that are about Phantom Presses
we can't see customer support tickets though so


