#🌐│pc_gear
1 messages · Page 12 of 1
Just sold my CRT. Ordered the PG27UCDM
The setup I have to use while I wait for the monitor
Ergonomics 
Why did you switch from the CRT?
Atleast put the laptop On a cardboard box
I ordered speakers not long ago which would not work well with the monitor on this desk. The desk is too small, as well as the space in my room. I cannot get a deeper desk since my chair is almost hitting the bed behind me even with this desk depth.
The CRT was so deep that it would end up significantly blocking the direct sound fired by the speakers. Also, the CRT + 2 speakers and speaker stands is way more weight than this puny desk can handle
Nice monitor you're getting too & happy for you that the CPU was your only problem
Just get a new desk
There is almost no space left for that, and I do not own the furniture here except the chair
I'd have to ask the landlord if I can switch out the desk he bought for this room with a new one which would lead to another problem of not having anywhere to store the old desk (He has said before there is nowhere outside of my room to really store things)
So keeping the CRT was just too many problems
I sold it for a peace of mind and to get good speaker performance
Another issue is that the speakers are not magnetically shielded and would definitely interfere with the monitor at such a close distance
Thanks 
oled hype!
Ah my ocd can finally rest. Work computer appropriately mounted under desk for a clean table surface
Fireeeeee
Yeah the M4 chips are beasts
My M4 max MacBook Pro is a monster
Can do 6 streams of 8k 60 ProRes 422 in DaVinci Resolve 20 without breaking a sweat.
My fricking laptop with an Ultra 9 and a 4080 laptop gpu can't even do that despite having more raw horsepower on paper
Hatsune Miku 👀
Hatsune Forg

thats cursed

XD
wtf
?
my fav DLC 
and my fav emote
deathadder v4 
Beastx pro 💪 💪 💪
i love my OP1 8K V2 
Im still beastx maxxing
Best mouse i have ever used for my hand shape
i never get a Beast X mouse soo 
maybe add this to the list and new Lamzu Maya champions edition
I would, but i don't know any details, i want to purchase basically in 2 weeks, just alot to go through and decide.
Viper v3 is great too
Razer is excluded completely, no
I specifically had experience with Razer mice, 8 total occasions in the span of about 3 years that were constant problems, from their side. So everything Razer mice related does NOT exist. Thanks.
that deathadder v4 looked very interesting ngl
I'm always going back to Viper
I will forever shill beastx 
Using glass again 
I may eventually return to glass
Raiden still treating my well though
Using Obsidian Airs right now, they were scratchy first 2 days and now they're pretty smooth after break in
Plan to get new Cyclone Pros, they come with spacers
Im still using stock beastx skates (the full ones not dots)
They're not bad on cloth
Horrible on glass
They felt good for a week on my mini + glass pad (using dots)
Once they started to wear it was scratchy as hell tho
When? Back in the 1900s
Roughly 2012 to 2014 or so.

I had shit experience with razer leading up to 2020
Thats when I decided no more razer products
Every single product i owned from them aside from their god awful plastic mouse pad bad issues
anyone tried the artisan mizugomo skates? gonna order a couple new pads and might get some if they’re decent
Yeah, I wouldn’t order them alone but I’m planning on getting a couple new pads and they’re only a couple thousand yen so thought they might be worth trying compared to my x-raypad jades
I've had this problem with Logitech mice in the past, ever since I've had Viper V3 Pro, never had an issue so far, my first Razer mouse too
Bet, will buy them too, good looks 
i got them on my Key83 and they have felt like the best cloth pad skate ive used really
can someone suggest me a good mouse i currently have wl beast x but i want a new feel that is good for fps games too
tried to use the new jade ultras after and they felt like mud
is this the best mouse tier list?
@hazy fiber sorry for the ping but i just wanna ask so i can buy the no.1
There's no "best" mouse
There are many good mice
Viper V3 Pro
Lamzu Maya X
Pulsar X2 CrazyLight
Hitscan Hyperlight
forgot to mention g502
which one do you prefer the most for fps game and which mousepad glass? i don't have any mouse pad rn
G502 my favorite mouse
Do you want medium size mouse or a small mouse?
medium size
i have wl beast x mouse rn i can cover the whole mouse with my hands
Then get either Viper V3 or Maya X. I haven't tried Maya X but I like Viper
You can watch reviews and then decide
okay what about for the mouse pad? i see people wanting the hack something
i forgot is it good?
I haven't tried Wallhack glasspads, but people like them.
I have only tried GLSSWRKS Hana
I think skates are included with Wallhack glasspads
your mousepad is hella expensive
HAHAHAHAHAHAHHAA
You can only get it on eBay rn
If you want budget but very good glasspad, get Tekkusai Singularity
okay ill check it out
Artisan pads are nice for cloth, glass is kind of another ball game entirely if you're using it for fps anyway
hands sweaty hehe
even tho the glass is high quality? i really don't want cloths lol
Get a sleeve and a microfiber cloth
^ for glass
got both of them
Lol I had this when I first moved into my new place and got new baby kittens and they chewed on the cable
so hana glass 250 is a steal right?
Definitely not a steal
Then I got GPX 2 Superlight and had left click issues and borked Mouse wheel after like a year or 2
Get something else
now I'm on Viper V3 Pro
just wallhack glass pad?
Not sure, but i collected all the top picks i could from friends and others, it's also not in any type of order, just as i collected.
Mine is in the closet after it started having issues
I even took it apart and cleaned it
Padsmith has some good glasspads too
Scroll wheel and left click still broke
icky
thank you so much!
and I got Viper V3 Pro around the time it launched for $40 below MSRP
Got the hook up
I bought it in 2024 and it's still perfect, wish it was slightly smaller but w/e
Nice, yeah I'm not deep into the mouse rabbit hole in terms of hands size, mouse size, etc, this one works for me tho
I love it for the battery life
Yeah I mean if mine didn't start having issues, I'd still be using it
and yeah battery life was solid
rarely had to charge it compared to my Viper V3 Pro, which still has nice battery life but I find myself charging it more frequently
I'm charging mine once a month using the 1000 Hz mode.
I've got a Naga V2 Pro in it's box because the 12-button side panel isn't comfortable and while it's nice with the 2-button side panel, it's much heavier and not as nice for longer sessions.
Got a Scimitar Elite or whatever the latest model is and that has a bit of an awkward shape but is more comfortable for longer XIV sessions (if I'm not just using a controller).
Logitech G600 still remains undefeated in the MMO mouse department... too bad Logitech haven't made a modern version.
I'm sure there's a higher quality mouse that's effectively just the GPX2 but until this dies, I won't bother looking for it.
I've heard that finalmouse have pretty good battery but haven't tested it myself
I have a MX Master 3S for work and it's like 6 month of battery life
I have the older MX Master 3 and it’s the same thing
wish the polling rate wasnt 125hz though
wouldn't mine like 1-2 month less for at least 500hz
Now, I’d love the 3/3S with 1000 Hz polling rate. I would use that all the time as a non-competitive gamer.
lol nah a bit toooo heavy for me other than for work
its decent, has held up with my other mice, but i wouldnt say its a crazy difference from the other contenders. I usually dont notice it which is probably a good sign for how batteries go in wireless mice
nice, isn't their battery smaller than the competition cuz of weight? wonder what they are doing, sensor or just good power management
I havent checked out their battery size, but i think their sensor is the one before the new 3950 sensor
Bro sold
you just mad im getting cat dongle
and you got that poo poo razer
@plain schooner
I got the beast X mini cuz fingertip
i liked mine but too small
was fun when i could use it
I just find fingertips more comfortable due to the fact I’m a chronic sweater whenever my palm is touching anything
Tiny hands +chronic sweater and very flexible joints
I’m afraid that will be me in a couple years time
Claw on controller for a dozen years probably isn’t the healthiest thing I’ve done
claw still feels fine to me
I can’t do claw for any extended periods of time like 6hours and I’m cooked
i have paddles so i only claw for certain actions
I just never got used to paddles
once i got used to them i never went back
I know it’s probably better but I can’t I just use pointers no matter what
It’s too much muscle memory for not enough return anymore 😭😭
I will stick to K&M
i hvaent really touched my roller since i stopped playing apex 
I only use a controller for fighting games 😭 and maybe a Cod game here and there
we all know zeroumouse is the best ftip mouse
could design your own ftip mouse like I did!
What does it cost and what’s turn around? And specs
basically took the guts of a Pulsar X2CL, took me about 2 weeks of very laid back reverse engineering and CAD work as well as refining the shape to what I find most comfortable for my hands and grip style. the cost to actually 3D print the shell was mere cents.
Aren’t those just g pro shells like stock
How’s flex in the shell
its a pure ftip mouse, so its more like a skeleton than a shell
think like zeromouse style shell
aye! the only barriers to entry for doing something like this is your design abilities and access to a 3D printer.
learning proper mechanical design is not easy
Lucky for me I have a gf who works in cad for architecture engineering and she messes with our Bambu and prusa printers a lot I just print stuff through tinkercad lol
I tried once 😔
rip
I applaud anyone who knows their way around that stuff I can’t
lol
did you use the mini before or the regular size?
mini
UGREEN Nexode Portable Power Bank 300W(29% OFF): http://amzn.to/47zE6gp
Check Out UGREEN Nexode Power Bank: https://amzn.to/4oGTr52
Support us on Patreon: https://www.patreon.com/hardwareunboxed
Buy relevant products from Amazon, Newegg and others below:
Asus ROG Strix XG32UCWMG - https://geni.us/scnBt
Asus ROG Swift PG32UCDP - https://geni.us...
Maybe I don't get an iPad Pro this year and instead buy this.
Glossy WOLED 
But iPad Pro useless 
Great hardware limited by iPadOS you can do barely anything on
If it was iOS or macOS then it'd be great, but on iPadOS all that power is wasted
The real question is how much is asus going to charge for their 540hz version. I’m guessing $1200 but if you told me more I wouldn’t be surprised
No its perfect for watching Youtube when eating
The 540Hz seems cool but I don't need it for Fall Guys and FFXIV... or whatever story game I'm playing.
7800X3D + 4090 is perfect for 1440p 280Hz
Plus for only $699, that's a really good price.
for non comp games sure
I am a non-comp gamer
I just wanna get that 360hz matte display one from asus 
Quest 3 would like to differ
No mess on screen cause it's on your eyes
but the displays are bad
Good enough for YouTube
time to get a vision pro
Ooo yeah
First impression of the tangzu
Damn it's as good as I remember the first one
Hmm, not as detailed as alba. But for $24, def very acceptable especially since this is for my sister
I kinda dislike the vocal emphasis though, but my sister listens to vocaloid a lot so this should be nice for her.
The emphasis makes piano feels weak. But the bass is nice though
$159 vs $24
not as detailed
Gonna try the super mix
I got SuperMix4s I like em
Supermix cable too thick
yep, supermix 4 is very nice, it's about as what I expect for something that's kinda the opposite of Alba. I prefer listening to piano song on alba, but supermix bass is really nice.
Valve Index possibly has the best eye-tracking motion clarity in a display you can get
Far far better than even the best oled monitors. Easily beats 720 Hz oled. Beats CRTs
I hope you're joking, cause if that's true, why the fuck it's not being used more.
It's made and optimised for that very headset
valve do be like that in hardware I guess
Apple Vision Pro is nice, but there is like no support for it at all, not even like a simple display bypass mode.
Quest 2 and Index have an MPRT of 0,3 ms according to him
does that also include quest 3 S?
Idk
3S feels like 2 but with better chip.
3s and 2 uses the same lenses, the regular 3 got the nice pancake lenses
This would require a 3333 Hz display to match btw
But a 3333 Hz display would be better at other things assuming that framerate
My oled monitor has not been sent yet 
This country is so slow
Which one did you buy this time?
999hz
This time? It's my first one. PG27UCDM
Oops was thinking of someone else, but dang 4k at 27"

You’ll like it. I got mine back in march and been very happy. First QDOLED for me and honestly didn’t notice much of the purple tint at all like people complain about.
My LG C1 TV (WOLED) has the same amount of tint to it from direct light.
The C2 has a light pink tint from certain angles
But nowhere near what I've seen in pictures of what QD-oled gets in a worst case scenario
I don't think I will be affected much by tinted blacks
I don’t notice any significant difference between the c1 and pg27ucdm. If anything, the c1 is slightly more noticeable tbh.
Me either, it supposed to be more apparent if you have more light hitting the monitor but even with my window curtain open or room lights on, it doesn’t turn purple to me
Which one?
The monitor one
woah no way
@heady crystal

Homemade DIY VR treadmill, that was right under our noses this entire time.
Check out the second channel :)
Tutorial Video: https://youtu.be/EzYy1MZocXU
HL2 Playthrough Video: https://youtu.be/bLBuH6-L8Qg
VR Headset: Valve Index
PC Specs: Intel i7, RTX 3090 Ti, 32gb Ram
Chapters:
0:00 Intro
2:30 How
5:30 Features
8:37 Experience
13:18 Immersi...
$350 for a DIY VR threadmill. Only forward or backward but waow, it seems like it works really well from the look.
I'd play Rust with this
anyone recommend any IEMS my budget is around 200$ - 400$
Do you have a sounds signature preference? Cuz there are literal thousands of options in that price range
well uh, i just need something good for fps, horror, etc. and preferably black and red color
Are you upgrading or is this your first "nice" iem? Color requirement kinda makes this hard
Sorry, this is my first nice IEM. I'm switching because I'm tired of the hair pulls from my Arctis Nova Pro Wireless.
Ah ok, I would honestly recommend starting with the truthear red at 50-60
They are very good for the price and is red/ black
Alright, thank you so much ! :D
crin tuned IEM is nice
Yeah
Zero:reds 
best 60$ that i spent on a IEM
and i switched from a 120$ Wireless headset xdx
How big are your ear canals
Because thats what everyone should ask
well all i know is the small buds for the airpods pro fit my ears perfectly
How deep can you stick index finger into ear canal
Or can you even fit it?
If you cant. It would mean zero red wouldnt even fit
Kiwi ears Astral ($270)/Xenns Top Pro ($500) for my personal rec, can include the Tea Pros ($350) if you like a lot of bass
tea tea
@abstract warren well we do not know his nozzle size
If we dont know nozzle size we cant get proper iem for him
Can't they just get smaller third party tips?
Nozzle size + ear tips size u know
It is kinda important
Or see third party reviews on YT, but we can’t be having that
Well he could get small tips
Though
Entire nozzle could be already too big for him
tbh i would wear one 

Try the RTINGs color management profile, I happened to prefer it over the standard profile
I have it set up now. It looks way better than my CRT
the nozzle is like 7mm wide in diameter
thicc boi
its gonna hurt if you use it for an extended amount of time, im using M on my airpods pros and it took a week or 2 to get used to them
id say youre better off looking at other options
using the zero:reds probably moved my airpod pro tip size up to L but i havent bothered changing it
Nice
Today or tommorrow i may get a g9 oled g95sc
Some ones trying to snag my ultra gear oled so now will have a more open desk for the g9
Well you are not supossed to do it
Because you could hurt your ears
yes.. its why i said i recommend looking into other options
Just do ear stretching
Thats why i ask for ear canal finger test

ok
Oh cool didn't know smsl started making audio interfaces
I'm doing USB PC > SMSL PO100 Pro > coaxial spdif > speaker 1 > coaxial spdif >speaker 2
Omg
I opened Dragon Age Origins to try the monitor. It looks so incredible
Turning the camera around looks so damn good
Also running with AA off and it looks pretty damn sharp
When you see smoke rising in any game it looks like it would irl it’s really sick
No grey blacks
Colors look super sharp

163 ppi 
I'm going to download CPunk to try HDR in a game
Do I have to enable HDR in Windows before opening CPunk or does it enable automatically
I think you have to enable in windows first
I wasn’t a huge fan of HDR
SDR looked better to me
I really need to upgrade my GPU
240 fps in Origins looked so good
I'm surprised it hasn't gotten better at this. I always felt it clunky having to do that
I'm surprised it's still working like this
screenshots are fucked (and other game-recorders that isnt obs)
well im using the windows shortcut for screenshots (win+shift+s)
the only way i got okay screenshots were with gamebar
ill try it again when i get home
its okay like 45% of the time
the last time i used it
Hey I just bought the 60HE wooting, is there something that I should expect that would be a little complicated to setup maybe like the software or something of the sort?
Wootility isn’t too bad to learn once you poke around a few places to see where everything is and configure to your liking.
Might take some time but should be straight forward
werent you the same person talking shit about oled monitors a few months back then you buy one yourself 💀
Alright thank you!
I was not shittalking them. I said that I'm not happy enough with any of them to upgrade. I wanted to wait for LG's panels that do not use white subpixels. But due to compatability issues with my speakers I ended up having to get rid of the CRT and so I bought the oled that is to me the best one there currently is
true, I go from 60hz all you need to 120
Single player games this is true
Having hi fidelity audio trumps higher refresh at that point 
tbf, I feel like I wanna go full audio. Buying ~$150 iem and listening to it gives me better enjoyment than Gooning with AI lmao
You also need good dac amp
can't wait to demo hd600/dt990 pro on december, I'm itching to get either of those for like years.
Audio show?
nah, just regular store that has them available
I still think I need a new desk. It's more narrow than ideal for optimal speaker placement

also the perfect time since I prop gonna saved up enough to also get a dac.
Then build one ur self
No
No
Have you looked clamp-on stands, e.g. I use https://www.amazon.com/dp/B084HPVQBK
The desktop studio monitor clamp-on stand pair by Gator Frameworks supports most small-sized studio monitors in both vertical and horizontal orientations to improve speaker performance during playback and mixing. The GFWSPKSTMNDSKCMP functions by separating and elevating speakers from your deskto...
No
I already have stands for the speakers
The stands were VERY expensive (I even bought used)
Neumann stands are overpriced
As a kiwi ears astral owner this is true
I've spent some hours on the product pages for their mics and never even added to cart 🙂
I got these
I want a balling genelec setup one of these days
I was lucky someone was selling them used because I don't think I'd have bothered to buy new ones
How was the top pro?
Remembered you were waiting for em
Ah, the reason I specifically mentioned clamp-on is because you could attach them to the sides of the desk and gain a handful of inches (not to mention freeing up desk space)
~$150 iem is all you need. Prop gonna grab 1DD 3+BA IEM next, eyeing Juzear Defiant and wanna to avoid anything Harman JM-1 since Supermix 4 already gives me that.
I loved the original tops, and honestly the Top Pro lived up to the hype for me. They are my favorite set from all I’ve tried (Yanyin canon 2, OG top, Fiio fa19, astrals). Astrals are also really good for their price point
Not going below kiwi ears astral for set
I wonder if they would fit. My desk is one of those stupid desks with a support piece along the outer edges making it very tall in that spot. Attaching things with clamp-ons is hard
I only set that amount so that I don't have to carry around $300 on my ears lmao.
Ooo how was the fa19?
I know fiio loves mid bass
Just another reason to get a better desk
If it doesn’t have atleast 8 drivers I’m not touching it
Lmao the drivers wars
They were a little too neutral for me and sometimes made normal videos sound distorted etc. they were the loudest I’ve tried by far, but I didn’t enjoy the tuning as much
The earvents for me were kinda brittle and during regular cleaning it got ripped off 😭
Oof
Not worth the $1k for me, but I’d rather try the new monarch MK4s
For that range
The new mk4 housing looks so nice
The top pros are 100% it tho if you like the monarch tuning @frigid ivy
waow, 1k~
I love it
If you carry your phone on you it’s already more expensive than that, you may think that now, but you’ll forget about it pretty easily over time
Going out and about with a wire just seems cumbersome just get air pods tbh
I don't mind wires, plus since I'm going to arcade, I can enjoy my IEM on my way, and during my time at the arcade
I guess you're right. Hopefully I could try the insane 8 driver IEM someday
Worth it, I wouldn’t go past $500 personally, and honestly for the $100-200 range I’d just go Astrals all day. Their tuning is closer to a $400 set than their current MSRP imo. They sound night and day better than the Yanyin canon 2s and those are like $100 more expensive
Truthear hexa all i need in my life

hmmm, astral could be a nice set for me. from the graph it seems different and has driver config that I'm interested in
They were the first kiwi ears IEM I’ve tried after being interested in the orchestra lites and honestly they pack a punch. I think thockson is getting some soon
Are you interested in over ears at all?
i dunno, my experience with them are just the cheapo while hearing a lot of good stuff about hd600 and such
I was going to try until my FA19s told me to go f myself

Lol
The only over the ears I’m interested in are the crazy HD800S but I also don’t wanna drop $1.8k on those
lit cost as much as my AI pc lmao.
Yeah even on discount they’re kinda obscene
I’d rather buy the monarch MK4s
But I also told myself I wasn’t going to go past $500 again 😭
I've been daydreaming of owning a pair of HE6 or Focal Utopias
I feel like I’d need a new dac for those 
HE6 definitely need a beefy amp, utopia isn't as demanding
Im rocking the ifi zen dac v3 atm, i wonder if its even worth really upgrading DACs for IEMs
Only if the amp is noisy at low volume or to get a digital adc volume knob
So you get perfect channel balance at low volume
the more I look at astral in graph, the more that I see that it's tuned very closely to top pro while also close enough to alba which I like for listening to piano recording. So I'm hoping it'll be a mix of top pro and alba.
From the reviews I’ve heard the astral tuning is similar to top pros but the pros have better clarity, resolution and has a greater pop to them
Hearing snipers in Tarkov with that level of clarity and vibrance is alarming 💀💀
@lunar holly where the astrals 👀
I can see that, alba also has less clarity than SM4 and the treble on alba is similar to astral (if I read the graph correctly). Though I'm not really chasing clarity since SM4 feels clear enough to me.
Once you get your first big boy set it’s like a third eye is opened
I remember going from a random bullshit wired earbuds to Bose was a religious experience
going from kz then wan er then zero 2 to alba. Going from KZ to wan er already feels insane lmao.
It gets better
Listening to some EDM tracks with top pros felt like I was suspended in mid air and the sounds were racing around me
SM4 gonna be my main rhythm game IEM. The tuning is really unassuming while being clear. It doesn't demand attention much like Alba. But Alba is really good at calming my ADHD
Shit can get crazy real fast
It’s those experiences that keep me coming back lol
legaller than drug and cheaper long term lmao
I am also using true bass and hi power mode
Makes it feel more uniform and pop more
waow, jm6 pro is all I need for now for DAC. Or regular 3.5mm on my pc.
And 4.4 balanced 
4.4 best connector
I didn’t like balanced on canons or original top as much, but the FA19s and astrals were great with it so I’ve kept it
I could switch to 4.4 as long as there's good 3.5mm to 4.4
Astrals have the swappable adapter
hmmmmmm
I could possibly get 3 same cable and just hot swap between 3 iem
naisu, thanks for the IEM recommendation, astral going to my 'to buy' list. Maybe December I get it.
Tuan is getting them soon so he can also give you his opinion
What cable do you recommend for my iems
Cables are kinda hit or miss
im pestering him in 3 months. That should be enough for me to know if he likes it.
Ppl like kinera cables, but the pins didn’t line up as snuggly as the stock for my top pros so it annoyed me @plain schooner
I’d probably use the stock cable unless it gets super frayed and feels like shit
For my other 3rd party cables I’d have to constantly use flat pliers to make it more snug but it never worked too well @plain schooner
That extreme 
Yeah it kinda sucks
I would suggest kinera if you do get one
You don’t have a lot of choices
Or you get the $200 effect studio ones 
Just ordered some
Timeless Elegance, Defining a New-Era Masterpiece CENTURION II is crafted with flagship-grade materials — UP-OCC Platinum-Silver Alloy, Gold-Plated Gold-Silver Alloy, and Gold-Plated Silver — representing the pinnacle of EFFECT AUDIO’s engineering legacy. Specially designed to align with CENTURION II’s material tuning

Fuck no 6K is insane
Cheapest is like $200
I haven’t tried but it’s kinda crazy shit
Prob not worth it
Some of them are really ass tho
And are fray city
Pain
@heady crystal https://www.techpowerup.com/340347/logitech-mx-master-4-pricing-and-launch-date-leaks
We've already reported on the upcoming Logitech MX Master 4 mouse, but now full details, including pricing and the launch date have appeared online, courtesy of WinFuture.de. Also revealed is what the new thumb rest button is and it goes under the name of Actions Ring which is said to be integrated ...
still a brick, but I wonder if they upped the polling rate
1000Hz would be nice
Why you want 1000hz in office mouse
because I have been spoiled by 1000Hz mice
Then join me
So it feels smoother on desktop
no
nothing can beat the Magspeed scroll wheel on the MX master 3S
and horizontal scrolling
I need that too
G502 scroll is devine
Mouse
-2021 added subs
Jukin Media Verified (Original)
- For licensing / permission to use: Contact - licensing(at)jukinmediadotcom
the master 3S has some very nice notches and when you turn it off it's smooth as butter and tight as a drum
Master 3s can do it?
yes
ofc
the encoder is magnetic
so it's the smoothest one i've felt
and not weigh like 250 grams
Are you sure
yes I am sure
because i've done it before
LMAO
it's called magspeed for a reason
Well g502 is like 120g
that is nice, but horizontal scroll wheel
Had a few G502s, but i dread if i went back to that heavy ever
keychron tried to make a smaller clone, but just not quite as refine as the real deal
Keychron M6 Wireless Mouse. It supports 2.4 GHz, Bluetooth, and a USB connection. Besides, it provides two scrolling modes and multiple ways of scrolling. All the essential hardware features in an ultra-lightweight mouse are ideal for any use case, whether it’s work, gaming, or anything else.
Although almost invested in a HoF Tactical, which is again relatively heavy
yeah I was tempted
Hope it comes with an AI subscription too
https://www.theverge.com/24206847/logitech-ceo-hanneke-faber-mouse-keyboard-gaming-decoder-podcast-interview
lol I hope not, then again I rarely open G hub or the regular logitech software
OBMM is clutch as well
Options+ is at least not garbage like GHub
yeah
I just wish GHub was morphed into Options+ as one unified app
and not have to, install both of them
LMAO
or browser based
Don't have much hope that Logitech will bring out anything good, seems like anyone that had any idea what they were doing has left
all hail wooting
classic xerox scenario
wooting mouse would go so hard

Only if it was g502
https://cdn.discordapp.com/attachments/874235875591065620/1408862046296211708/C96228A3-378D-4324-B81E-07F7A3DEC4D5.png?ex=68af3d07&is=68adeb87&hm=4038a1cc3a52f72972db7afe9b0fb31c3fcb8e1db823a9bdd939a6edcb9ea8d8 speaking of wooting mouse, whats the one in the picture, a friend was wondering
Embed fail
Maybe, for fingertip users
I can't use fingertip mice
oh well that and i was mainly talking about the paint/livery it has 
Cool lemans gulf livery
yea
Still waiting for purchase..
Today everything changes
︀︀
︀︀We built our own mouse production facility from the ground up, designed for innovation & scale.
︀︀
︀︀Technologies we’d never trust anywhere else, now unlocked.
︀︀
︀︀And starting today every flagship mouse is $175 and ships next day
︀︀
︀︀No waiting. No delays.
Now give me optical switches
finalmouse msrp below logitech / razer 😭
where is the factory though
monaco
Lol definitely fits the while finalmouse vibe
nah jk, no idea
you would think if it was in the us they would have it posted everywhere
They are using fancy names. We rented space in factory and signed nda with them like wooting so They wont steal ur designs
@hazy fiber
seems to be in vietnam
Thats what they meant
Wooting atleast cant lie
and lower price is nice ig
Because i keep everything about them in wooting files
Wooting files are already like 65 pages
Finally a factory designed to have less qc from the ground up
thats why they got cheaper
Finalmeme
I got attacked by a bunch of idiots in their discord for calling finalboy out. They say they're lowering prices but they aren't factoring in tariffs with the $175 price for mice. Also, it's a US company, keep production in the US. Trump is giving out tax breaks for companies to invest in domestic production. Not to mention, everything would be done completely in house and they'd have complete control of production and processing for shipment. Finalboy's response was that it would be too expensive still. Which is only true if you're doing 1 limited production run a year. As production scales up and becomes constant, the margins between the two becomes insignificant...far less than any tariffs.
lol
I don’t think I’ll ever buy a finalmouse product because of how poor their business practices are. Even Call of Duty produces a better product 😂
flaming them for not producing in the US is funny
Nah call of duty is on the same level
Idk yesterday’s post that carry forward won’t be in BO7 was pretty big and there’s leaks that lobbies will no longer disband after a match. I’d say it’s ever so slightly better than finalmouse. Both companies are only interested in $ though and don’t care much about the quality of their products.
Well because battlefield forced them
Yeah cod just got scared because bf2042 is doing better right now than it both in player count and profits (all cods combined) and it’s the most hated on battlefield game and is 4yrs old. I’m one of those people playing it though. Got my Xbox running on an afk server to get the bf6 loot.
its wild that they can do it in the us for 150+
yeah the free battle pass has some nice stuff
but idt I have the time to grind it all
not to mention 2042 is 3 dollars rn
Just afk farm every day each weekend when 2xp is live and complete the weekly challenges.
I refuse to buy it on my pc. I still really don’t like it. Still have it on my xbox and got ea play on steam to knock down the price of bf6 preorder by 10%.
bro like 1/4 of the lobbies in some games are just doing nothing, LMAO
0 kills 0 deaths
like bro
💀
There’s afk servers in portal. I just leave my Xbox running 24/7 during the weekend and play on my pc during the week to do weekly challenges.
Already level 38 on the pass
dayum
Shii better than some weirdo that doesn’t shower and is impossible to kill.
LMAO
been 3 days since no updated tracking from beast x pro mouse 🥀
Yeah the shipping is ass cheeks
Prepare for it to take the ‘Gateron Special’ —> 8-12 days
if it have to wait like 20 days and get hit with custom fees im returning that piece of shit
and buying from deskhero
$212 compared to $250 from desk hero with better and quicker shipping without the custom fees
They treated me so well
No import/duties and it was quick
Still takes its slow ass time
From china to my door in a week ain't bad 🤷
It spent like 2-3 days circling the Great Wall of China and then it was delivered to a 1 star delivery company 😭😭😭😭
Like fuck no
Shit my lamzu got this treatment
It came from china to Canada in 2 days
I think the message of me malding out is still in here
Then took 5 weeks to make a 4h trip to where I live
Yeah literally this
Like what
You don’t have a choice
fr 😭
Yun express always delivers but it’s ASS for shipping time
Delays/tracking not always happening is true, lost packages I can’t say ever happened to me
They slower than USPS
It was fine for me
Its the last mile couriers they use
They suck ass
Last mile always sucks
It seems they just have random people who drive their own cars
For the last mile I always get
Literally just had an Indian dude pull up in his prius and hand me my lamzu 😭
No business markings/postal markings anything
Seemed like a personal car
Mf went on a whole ass road trip before getting to my door 💀
Already been posted
If they don’t implement optical switches I sleep
Indeed
TTC mechanical my beloved
Never tried mechanical until my Ulx and I honestly really despise MX mouse switches
Don’t forget that I’m TTC #1 Fanboy
I hope they can be like wooting
It’s not in your name so I figured you shedded the weight of such a burden
This is immediately upsetting, but cool on further review.
It’s a little too high brow but once it hits 
So long as it means qc improvements yes
And making ulx less overpriced is always welcome
$175 *PLUS tariffs is still wildly overpriced. And now that they don’t do stuff in house, warranty servicing will take much longer.
Thatd only be outside of the states though no?
It would only pertain to those living in the US
Nah they’re moving it overseas
Yeah. It’s a factory they’re building in Vietnam. I caught a bunch of flak in the finalmouse discord for calling them out on it because there’s so many tax breaks for US companies to build production facilities in the US. It’s only more cost efficient to outsource if they stay doing limited run. And that sounds like that’s their intentions from the reply I got from finalboy
Also, he teased a “hypothetical” new mouse drop in about 2 weeks if you’re interested.
I am not i will never support that company
Me neither. I was saying earlier in here, cod is more pro consumer than finalmouse
They would need to make something absolutely revolutionary for me to be interested in one of their products
And even then id hesitate because of qc
https://www.reddit.com/r/FinalMouse/s/0GzqMmIo02
look what I just saw on Reddit 
Absolutely wild. Not acceptable for any mouse to do that. And to charge $ to fix?! I’d honestly take them to small claims court…I’m that petty at times.
Finalmeme
LOL
190$ mouse btw
The fact they still wanna charge over 150usd is absurd 😭
Over $100 is obsurd. My egg op18k is much better and only like $80
Whats funny, wooting would fix it for free
its 2 years old
i still havent received a tracking update since the label been created 3 days ago
if i dont see an update by tomorrow im going to message their support team
i dont mind waiting but no update is crazy work
finalmouse is lowkey right in this case lol
but who knows the whole story
What skates for g502 should I get from max gaming?
paint peeling on a 2 year old mouse is wild tho
especially for the price
imho if it wasnt wear and tear it would have been apparent and reported earlier than 2 years
yes but that just screams shit quality to me
but he says its in rotation so idk if he even use it regularly
ive never had a single mouse have paint peel
it could be not that worn
they said its 2 years old but yeah who knows how often its even used
Doesn’t matter. Just another bit of proof that the mice aren’t meant to be used
You know, the black zinc 80HE coating issue going on for people (myself included)…if it say were to start being a widespread issue in 5 years, guarantee wooting would still do something about it. It’s a fundamental difference with how the companies are run and how much they stand behind their products.
Finalmouse is no more than a hypebeast company or whatever it’s called
Wow Reddit is a very dramatic place. Says the whole left button is flaky, but I had to zoom in to actually see anything
That's a fucking joke 
My Logi G502 has been used daily for over 3 years and no such thing happened
Another one to realize that you shouldn't go with Finalmeme 
G502 is also 100g+ and has other issues
Worst part of the 502 is all the nooks and crannies that are magnets to dirt, grime, and dead skin cells
I havent used a G502 in years, but the rubber wears down very quickly
Dont think Logi would replace that for you
3 years
Just a bit of wear under the thumb 
My $80 something op18k is better performing than finalmouse and have no issues thinking it may break. Sure it’s wired, but wireless one is still cheaper than finalmouse
I don't get why people even go with Finalmeme 
Same reason people buy from brands like supreme
Oh I love my OP1 8k, but you should keep in mind the materials used.
Yeah, one is meant to be used and balances weight with durability very well. The other one cuts corners and uses poorly tested materials and build structures, causing extremely high failure rates. Not to mention, an op18k is meant to be used so thoroughly, they’ve made it user friendly to service it, swap switches, etc. whereas the other one isn’t meant to ever be opened. However, many users end up having to purchase the parts and do their own repairs because the warranty doesn’t cover that kind of thing.
Finalmouse is plagued with a lot of issues, but all of their mice have been a engineering feat, in terms of materials and internals
Only thing finalmouse did right is force the market to focus on producing lighter mice. Internals really aren’t that much different than every other company. I’d say the only other good thing is xpanel is decent.
@plucky sky Also go with Fractals 
i think this is the way 😊 🍺
@jolly pulsar got Fractals recently, she knows how well they work 
if your key caps got shiny after 2 years you'd try to warranty them?
Less than 3 years
My g502 is less than 2 years old
I wore a small chunk out in 2 years
Also the rubber becomes shiny and slippery after less than a year
Well because you picked g502x version which is worse
I prefer a rubber issue than a rubber issue + double clic issue
A lot of Finalmeme fans has been caused by a rubber issue 
It's called Finalmouse because you throw it out of the window and switch to controller gaming instead
indeed they are awesome
That’s natural wear from friction, body oils, etc. Paint straight up peeling or chipping is entirely different.
Okay but for a 190$ mouse youd expect the paint to be good enough to last
Especially considering it wasn't their main mouse
nothing last forever. and its purely cosmetic
I haven't had a single mouse have paint peel ever
Whether I used it for 2 years or 5 years
most mice aren't painted
For 190 usd id expect a lot better
they are injection molded plastic
you have no idea what ahppened to that mouse in 2 years
They should make a anodized alu mouse, and call it maus 
they could have cleaned with with acetone for all you know
Judging from how the poster explained it, it wasnt even their main mouse and was in rotation with a few others
I clean mine with 99% iso (ik its different than acetone)
iso is was less damaging to paint than acetone
I highly doubt anyone is cleaning a 190$ mouse with acetone
Leave it to the wooting server to defend finalmeme
Never disappoints
i dont even buy light mice
im just saying
a paint issue after 2 years is well outside of what should be warrentied
they offered them a replacement shell at a discounted price
But its not even 2 years of heavy use 💀
Its a 190$ mouse do you forget that part?
the poster said it was light use as it was in rotation with other mice...
again loot at from the manufactures side
its 2 years old
and has a minor cosmetic issue
Its 190$
so
It shouldn't have paint issues 2 years in
at 2 years most cars wont cover paint issues
The fact you are defending this is wild
and they are 10s to 100s of thouands of dollars
cost has nothing to do with warrenty
its a minor cosmetic issue
and the manufacture offered a replacement part at a discount
A whopping discount of 30$ + shipping and taxes for a left and right click...
- tarrifs too
Oh lord finalboy how generous you are
also what even is the warrenty on the mouse is it even 2 years?
Its finalmouse, its probably 30 days
its 3 years one new ones
idk what it was 2 years ago though
ive seen 1,2 and 3 year on posts
Their warranty is also not even free
They still charge you
Talked to a dude who had to send his mouse in 3 times and had to pay each time
that is true for a lot of products
paying for shipping/handling isnt that out of the ordnary for warrenty
The what?
Since when warranty is not free 
Shipping sure but finalmouse uses very vague (limited warranty)
@proper vector have you tried swaping sliders on g502?
They've used it to get out of free warranty quite a few times from what I've seen
Even with very clear qc defects
Sounds american
They blame end user and make them pay out of pocket
Nope, I only use it at work 
This is exactly what happened with this case
I use DAv3 at home 
How could u.
Betray g502 master race

G502 master race is like the console master race of mice 
Well why upgrade peak
G502 lightspeed is peak g502
Truly the 55-60g bottom out of mice
Thats weight of g502 switch required to press?
Hes calling the mouse mid asf
2013 MMO raiding wants its mau5 back
I call it weak fingers
Call me when Logitech revives the G600
I will die of old age before this, probably
Not how that works king
Don’t worry he needs it to work out instead of actually working out
G502 is like eating well done steak for 3 hrs, ig some ppl are into that
yall just jealous you can't handle the 3kg weight of a g502
Yez very jeluos
Ok guys, help me choose skates for g502
I’ve used it all down from the MX master 2, corsair nightsword and razer naga… I’ll maintain my position that they’re all ASS as everyday mice
True, even artisan Pom dots aren’t saving that shit
@abstract warren well I saw dedicated skates for g502 on max gaming, but dunno which one to choose
So tell me which ones
Why are we buying new skates for a my 600 lb life ahh mouse
Get a normal fucking mouse 😭
logitech $10 mouse
It’s all you need
So changing skates isint like upgrade everyone does
Who’s going to tell him chat
So tell me which skates
Xraypad obsidian or jade

Get sapphire skates
And a glass pad
And breath in really close to your mousepad once a week
I want to buy artisan tho
And i dont think so glass mousepad can handle g502 slammed into mousepad
Trust you wanna do this
Its the move
Make your lungs low friction
Glass mousepad sounds like scam, like finalmouse or gaming sleeve
You know long sleeve shirts exist
give me sleeve that works with artisan zero
Avg g502 user opinions
Really any would work
Checkout pulsar
didnt work
i tried like 3 different ones and then gave up
there is supposedly some japanese one but importing it is pretty expensive
I like my glass pad because it doesn’t collect skin cells or pet fur, easy to wipe off/clean, and doesn’t wear out.
just use a glass desk at that point
Glass desks don’t have the same tracking performance, texture, and are fragile.
I don't think so it should be a problem if we clean mousepad in right time
They are a pain to clean after you spill orange juice on them (personnal experience
)
Your body will over time 100% release skin cells and other grimy junk on a cloth pad. That’s why you periodically have to wash them. A glass pad, I can just take a Lysol wipe and boom it’s completely clean and sanitized.
Well it is worth tbh
Did you spill Orange juice on cloth mousepad?
Not to mention they wear out over time. The main cons of glass pad is if you sweat a lot, you need a long sleeve shirt, hoodie, or arm sleeve. I don’t have that issue so it’s a case by case basis. Also, it wears skates but in the year I’ve had my glass pad, I’ve only gone through 1 set of dot skates.
Yeah, and into my Logitech g910 mechanical keyboard
The switches where sticky and when I pressed the space it wrote 3", so I just spayed a whole bottle of wd40 into it and fixed it that way
The mousepad took a shower
I don’t think it’s really a universal right or wrong as to which one is better. Some people prefer glass, some people prefer cloth. But definitely don’t dismiss either if you’re not aware of their pros and cons.
If I wasn’t a clean freak (mainly started from my previous career in EMS) and didn’t have a dog that sheds 24/7/365, id probably look at an artisan pad. But since glass is easy to clean in seconds and doesn’t attract dog fur, my personal choice was apparent.
Dog fur explains a lot
German shepherd…idk how she produces so much fur.
Maybe get mix that dosent shed fur

She’s a pedigree working dog imported from the Czech Republic. Not a pet you get from the animal shelter.
Probably my most expensive “possession” if you’d even call it that. She’s costed more than my house, property, and vehicles combined.
So like 400k?
Or maybe more
Just under 2m
Wtf
I didn’t pay for all of it. Got grants to cover about 75%
She’s a multipurpose dog trained in explosives, narcotics, bite work, and search and rescue (tracking, human remains detection, avalanche, and water rescue). She’s also cleared for airborne and ropes operations.
Didn't work how?
Is your house a cia hideout black ops site
way too much friction
And you work at home
Took 2 years of 12+hr training every day just to get her certified in everything.
I see
You must be definetly rich
My house currently is definitely a secure location. But when I lived in the southern US, she was the main k9 for anything throughout the whole county and we’d get deployed on rescue missions all throughout the country.
So you work at Police
Or you work in army

She was largely funded by fundraisers, donations and local government. My share of the costs were to get trained to be her handler, housing, transportation, food, equipment like leashes/harnesses/vests, and toys.
In other words your dog is a badass and the goodest of girls
Worked alongside police. Was a swat medic and would also get called in if they needed the dog for something. But I would get deployed throughout the country with fema for any sort of rescue missions for disasters.
So it explains why you are deployed everywhere
Very. Now she’s retired and enjoying every moment of it.
Pretty much. Certain jurisdictions do take issue with a dog being certified in bite work and doing search and RESCUE missions though so those ops I’d go alone.
Liability issue for if she were to bite someone that’s needing saving
Nah. Thats my specialty
Like at the hospital?
That's nice, do you ever find her still trying to work in normal day to day?
Oh absolutely. She’s pretty high drive, so that energy and mental stimulation has to come out.
Kindoff..
That’s like asking if kids go to school
If you’re talking about a show or movie, no.
Nah
What glasspad do you have?
i got updated tracking info on my beast x pro we chilling 
the update was it saying it got lost in shipping

Oled is ordered
Says itll be here around September 8th
which one youd get?
G61sd
There was an open box "geek squad certified" one with 2 year warranty
For 660 cad adter tax
base monitor tuning is pretty good, i wonder if the g60 profile o have work on the g61
Im colorblind so probably gonna do my own tuning
😭
oh well have fun
Yeah idk how well ill do but fuck it we ball
You are colour blind?
Yes
Which type
I forget what its called
Do quick colorblind test
But its mostly with green, blue, purple
Kinda happens with every color, depends on the shades
Red green it says
Well i have issue with eyes when i look on light (not ingame) i see lines going out of source of light
I didnt know it is not normal
@wispy blaze it is not from drugs tho
Ik its a genuine thing
yeah youre not supposed to directly look into light
Im just saying I get it when im stoned
It happends anyway if i do not look
Propably your eyes get more sensitive
Yeah when your high your eyes dont adjust to light as fast/well
It can be fixed with eye glasses or operation
It is not that annoying tho
I have kindoff mild version of it
I heard people cant drive at night without glasses because of that
Astigmatism
I have that also
Ye i have to get glasses finally
But propably i will have to spend like 400€+ for good ones
Because i cant see shit on long distance
@wispy blaze you might have astigmatism too
dw i spend 500 plus euros on glasses
I do not know prices of glasses that help with eye sight ok
Well do you want unwanted painful pressure in ear canal?
Nah
Aside from colorblindness I have really good vision
Don't need to see shit in the club
Are you joining g502 club?












