#🌟│wooting80he
1 messages · Page 328 of 1
Whelp, that's good to know.
wooting zinc case is better.
I tried many other case.🥱
still think zinc is better
I just think it's super plain
what are the other keycaps they look nice
traitors keycaps from the providence series https://traitorskeys.com/providence/
thank you, do they feel nice
Not as solid as the wooting ones but good enough tbh
the rgb shines through a little funny
it's the worst with the esc key but overall they do look good
id also take a look at this interest check from ncase if you're looking for a simpler design https://ncased.com/products/kb-w80he?variant=50568625619112
This Wooting 80HE casing kit is designed for users who want to upgrade their existing keyboard casing. This kit is specifically for the Wooting 80HE keyboard. This listing acts as a survey to measure interest in the featured product. To assist in bringing this product to fruition, click on Notify Me When Available butt
can't see using that over the zinc case on it now. But looks nice for being minimalist
i think the kbfans gt-80 wins right now. I like the center usb port too. But it'll be a bit before I ever order one probably.
by then something else cool might be available lol
Well i think it is abadoned
damn wordddd
Pure white showdown
I have made an unboxing article. Maybe you can read it with a translator.
what
Introduction to the modification of Wooting 80he.
v2?
Lekker v2 switches
i already diy modded mine
Black or ghost with white keycaps?
Ur choice.
Its ur keyboard ur opinion
But if u want others opinion, I’d say black case
✨ ✨ Kailh Moon & Star switches✨ ✨
looks cute, not sure if it'll be an ice option for 80he though
hopefully it's only few one
I got frost 🤌🏻 😍
Hey guys how long did u wait for the keyboard to arrive?
itll arrive when it arrives
Has anyone tried Cerakeys yet? I'm having problem with spacebar, even if I use the spring of 100g, the spacebar still struggle to push back up initially.
And I already turned the spacebar up side down.
KBDFans Holy80
More like Unholy amirite
Ngl haven't updated my wooting 80he since I first got it from the 2nd ever batch that arrived in the US. I'm thinking about updating it but does anyone know if the current version of the firmware is stable enough (like no induced ghosting etc) RN I have 0 problems just want my keyboard to be up to date
It wouldnt be released if it wasnt stable
Try to have your keyboard always up-to-date
All our stable releases are stable.
All our beta releases are also stable.
Not yet
It matters to me 🥺
But there's no difference, no
Actually, one minor difference which will probably not be relevant: we include extra stabilizer stems with our Jade packs for the rare event that a given 3rd party keycap set requires them. This is almost never the case, but every once in a while it matters
Yes. wooting sells outdated version of jades, you can get pro version on amazon
actualy my stabs on the 80 (nonjade) hat a sizing problem most keycaps just flipped down got a new one. is that something similar?=
ok
Not exactly sure what you mean here
would recommend getting owlab ti he over jades btw
less wobble, cleaner sound
are they more stable?
Yes
ok
Also theyre cheaper
we include extra stabilizer stems with our Jade packs for the rare event that a given 3rd party keycap set requires them. <-- how so?
90pc for 50$
stem is stem isnt it?
It has to do with specific keycaps sets for which the long keys (predominantly spacebar) has wide tolerances and results in an imbalance or seasaw effect
can you send me a soundtest vid or smt?
also where do i buy them
1i excatly had that issue with lekker v2 and my stab my spacebar liftet on the right side got new stabs works only downside was wooting didnt suply lube wich i think they should since not all ppl hafe that - i haad so no issue there.,.
are you EU or NA
Preference but I recommend 50g, 40 might be too light
do i need to select 84 or 1 here idk if 1 is 84 switches or 1 is 1 switch
oh i didnt read description mb
Each pack contains 10
9
Or you can get 84 sets of 10 for 420$
All of the keyboard's brains go towards maximum speed, and none of those silly RGB effect calculations
ok
rgb effects 👎
i just bought a set of 84 owlab ti's 40g
swapping from geon raw 50g
we shall see lol
i know haha had to do it already once I think they'll come out this time lol
few of the little clips broke but didn't seem to affect them being seated in there
second time is still painful
i got a pretty dope extractor that takes them out pretty good now too
And it feels like the first time
Like it never did before
which?
oh
it looked like it would suck but it actually works well for me
wuque puller is also good
Scared about taking my xray set off
Shit holds onto the switch stems like a motherfucker 😭
Might not be that bad but I'm nervous about breaking them
which switches are the best for Wooting?
Many options, theres no best
Ti he best because not expensive asf
Safest recommendation is owlab ti he probably, they sound good, they have minimal wobble and are fairly cheap
Or spend 180$ on fluxes 
i saw some sound comparisons and the stem wobble is why im trying the owlabs from geon raws
fluxes?
Wuque Flux
I wanted raws for white switch but ti he just looks like a better buy
200$ switches made by wuque
stop it im king of pissing money away on stupid shit when its cool
2$ per switch 🥴
Don't do it
are they worth? pls tell me no
Probably not
I'm sure they're nice but... so expensive
TTC Poms are similar and cost about half as much. Still expensive.
I paid 55$ after shipping for 61 ti hes, you can get 25 fluxes for the same price
They are absurdly priced but have almost no stem wobble. If they were 1$/pc then it would be actual good recommendation, but nobodys buying them for 2$/pc (except me
)
55$ cad* so less than 25 fluxes
do they sound good?
Yeah all of these are difficult to know without hearing them in person. Best bet is finding some back to back comparisons in the same board which is rare to find.
But folks do seem to like the owlabs and they're certainly reasonably priced
The geon raws sounds pretty decent right now
Video comparisons lead me to belive the owlabs sound even better
Raws sound nice but they disassemble themselves when you observe them too hard
owlabs sound cleaner
Cant wait to compare og jades w ti he
and also owlabs dont have that weird sticking at the top like raws
now i'm looking at these stupid ws flux because I was too intrigued not to lmao
Yeah the raw sticking was not ideal
$20 for 10 sure does seem like a lot for switches
Absolutely
It's about 400% the price of the average HE switch.
if they were 1$/pc then I would probably recommend them, but nah
compared to the owlabs what do u think
I will try fluxes on tuesday
they have less wobble, thats only thing i can tell rn
expected because of their design
ws flux is sold out everywhere it seems.
They will restock at the end of this month, but dont buy them for 2$/pc please😭
You did this, shafie
night mentioned fluxes first
not my fault
or you meant that i bought them for 2$
dont mind me
I found some.... BUT I just bought the owlabs and they not even here yet which would make it double crazy to order ws fluxes rn
You're both to blame then
thats me talking myself out of it through discord. Yes.
where did you find them
I've already went way beyond modding this kb then I knew or thought i would
owlabs are very good, please dont 😭
aliexpress
I got my geon raws from there a little cheaper and they actually showed up lol
oh i thought they were out of stock on ali too
90pc $180.40
dont buy them now, they might do sale in future. there was 35% discount code few weeks ago you missed it
yea i'm in no rush
gud
sounds like the owlabs will be endgame switch for me for a long while anyway
but i said that about the raws
lmfao
lmao
owlab is all you need for a 'good' clack HE switch... I'll say that when I got it
:p
I went all out and got that keyboardman modkit with the pom plate + foams, geon raws, gateron ink v2 stabies /w lube.
I planned on doing absolutely none of that shit lmao
hah
I cannot believe how much money can sink into a keyboard once you get started
this is a new hobby for me lol
800cad on my 60he :p
upgraded the entire setup new pc too lol
wooting ties it all together so good tho lol
I wanna try a carpio
they're awesome tbh
based beastx enjoyer
yessir!
guys what switshes can i put on wootiing 80 and what are the best
But I'm not wanting to spend 80 cad on one
i loveeeee the beastx so much
same
is Magnetic Jade Pro good switshwes?
owlab ti he
dont get the package with the 2x carpio. I dont even use the left one I just use the wrist wrest
Get just the one gaming one with the strap for ur mouse hand
This single one is 80 cad before shipping 💀
I stupidly ordered the normal non strap double set first. Then realized they had a strap one so tried to return the set, they offered me the gaming one for half off if i kept the original so i said f it send it
what??
should be 40
55 usd no?
jeez those tarrifs smacking u guys hard on everything
Nah that's normal pricing 💀
Cad is just worth less
Added an extra space in that word
True
55 for one sounds obsurd but I will say it is nice to have
Yeah that's before import fees too
And shipping

47$ shipping 💀 💀 💀 💀 💀
102$ after shipping and before import fees
Morning
ayoo
Do you have any preferences on stabilizers or the one come with it okay?
I swapped to these and like them a lot
I believe I have the Gateron stabs in my current keyboard as well
Though I'd probably get the transparent ones so LED would shine through if I end up using LED>
have no issue with rgb coming through with them as it comes from the switch
Oh, alright. Well, I'll just need keycaps and I should be finished. I need to find something that matches purple. 🙂
Keycaps will never be finished I still look at them weekly lmaoo
Bit very happy with the additional white set I got from wooting. I swapped out a bunch of black for white and added some accent keys and its good for me for now.
lol, well I have the same GMK's since Covid.
However ill show u the set im eyeing
The color scheme of this set of keycaps is inspired by KO2, the drum machine designed by Teenage Engineering. When your fingers dance on the keycaps, the pleasing sound of each keystroke jointly comprise an electronic song. We introduced elements of the drum machine into the design of keycaps to build an exclusive “d
these look super clean to me but no rgb is the only reason I haven't
Yeah, from what i remember is the better keycaps don't have RGB.
thats the nice thing about the wooting ones. Good quality double shot with rgb shine through
https://traitorskeys.com/infinity/ these are purplish
https://traitorskeys.com/ukiyo-e-浮世绘/ i want these ones too lol
anyone have the white zinc with black keycaps?
Love to see the batch update
Honestly I’ve been thinking to do that
I have the ghost version and just thought about getting the white zinc so if anyone has the keycaps, it would help if it looks good enough or not
What’s the ghost version? A different brand?
wooting's plastic case
Guys i ordered 4 days ago the 80HE how long did u guys wait to arrive?
yo whos key caps are those?
WS Mizo
those are fuckin clean lol
Yeah, they're limited releases.
3 days
8 days rn
Still waiting
If I understood the batch update right, I should receive it next week?
This is what mine says
I didn't think of this but does your package require a signature?
Probably not
Okay, good.
Hmm, well I hope not as depending on the date it comes I may or may not be home.
I also didn't realize that it shipped out in batches either.
Hmm, mine doesn't say back-order. It says Your order is being prepared to ship to you.
Oh, it's because you purchased the zin alloy case.
😢
Q: I replaced my keycaps with ceramics. The spacebar is especially massive compared to the plastic one. I don’t see a stronger Lekker keyswitch than the green Lekker L60 which is already installed for the spacebar. Is there a recommended switch for heavier ceramic spacebar or… should I simply keep using the original (lighter weight) plastic spacebar? TYIA
you can get heavier springs
wooting sells them
100g 80g
does anyone know the hex code of the green in the seawave effect?
You should put padding in the blank keys.
you will need switch opener to replace your spacebar switch spring with heavier one
I think the Mag Pro is quite useful.
One message removed from a suspended account.
it is just a bug.
TY for all your (super) timely help!
00ff8f you can right click it to get the color
thx man
np
It was available one day and quickly got bought up i think
Will there be wooting two He 100% keys 8,000 polling rate? Same as wooting 80HE?
Perhaps some day. We have however not announced any such products.
There might be one in making
Propably they will annouce it closer to computex
💀
Appreciate you for answering
My wooting 80 HE when pluged in only shows E AND R keys in read i cant do anything on the keyboard please help😭
Mansen, just for clarification, white zinc orders that have already been submitted for fulfillment will not need to have shipment addresses confirmed come Tuesday?
took my wooting80he to a LAN and couldn't get the gamepad emulation working on xbox. Does it only work on PC because Wootility needs to be installed? I had already set it up on a PC beforehand and had the settings good to go
This article helps you out with some of the issues and quirks you might encounter while using a Wooting on a console or in the PC BIOS. What is nKRO/6KRO, and w
it finally arrived
Finally got mine too:
Wooting 80HE
Geon Raw HE switches
JTK HSA Snow Camping keycaps
any recommended wootility settings? 1mm actuation is to sensitive
yall seen this??
holy80 looks fuckin crazyyyyyy
What is this?
holy80 case for wooting 80he by kbdfans, look at the twitter link above it
Ahh, my bad didn't see that. I don't use twitter, lol.
I think the design is cool but I feel like it's to open, lol.
I also wonder if it'll feel heavy or not.
my light indicator doesn't show up after using signal rgb by accident 😦
anyone know how to fix:? i tried to reset on wootility, update , reset on wootility even disabled it on signal rgb
replug usb
done that many times
what you're describing doesn't really make sense, assuming you actually fully disabled it on signal
do regular rgb effects work?
what does the lightbar look like? leds turned off?
yeah
what does your solid layer have? what is your profile color ( for the profile indicator layer )
but if even a total reset didn't fix it, that's super sus
oh and also what;s on the preview on the top of the screen in your screenshot
if it looks white here but turned off on the hardware, that's not a good sign
contact support is my suggestion
surely singal rgb didn't fry my light bar
and you're absolutely sure you have fully closed it to make sure it doesn't interfere?
then when i pressed caps lock no indicator wasn't on 😦
you could also try plugging it into another PC that doesn't have it.
ok
I somehow
hehe
turns out the little black led silicion piece was somehow off angle when i installed the case ;o i am a muppet
thanks dio for the support
wait so what does signal have to do with this lol
Is it low front height is what i wonder.
20mm+ is where you'd need a wirst rest, imo
Guys
Can u guys see the little defect on the case in the second pic
Support offered me a new case, or 20$ gift card
I lowkey chose the gift card bc I’m gonna get a zinc case in the future anyway
i installed it
I just wanted to mention, this looks like you installed something wrong and the light is getting blocked.
Yes, I'll inquiry what the state on it is. I can tell that it's not been continuous work for 6 month. Rather that it had to make place for another item, reaching a deadline.
is there anyway to bind like up arrow and down arrow specifically to spotify volume?
Excuse me, my order has been told that it has been delayed. Can I still buy additional goods in the order?
Calder Does wooting delay the shipment of white zinc alloy 80he to Taiwan?
Can do it through a third party app most likely but not through firmware
ty ty
Anyone else on the EU-Steenbok-8 batch?
I am
Do you still see the estimates?
Me too, what happened?
Yes
Did you contact the support?
sure
that’s why ☹️
What did they say?
Felt so good bought an 80HE two week old before Donny starting going crazy with the tariffs
does anyone know how to fix my browser not connecting to my keyboard
i can do it on chrome but on vivaldik it doesnt work
wootility doesnt work on vivaldi
rip alr
wtf is vivaldi lol
browser
Does typeplus stab supported for stock plate from wooting 80he?
yeah works fine
They didn't respond to me.
is there a owlab ti alternative that sounds deeper or thockier?
Bro use google💔💔💔
Give it some time, if it exist and do matches the tee hee, it would've been talked about here
what
Wooting devs be like.

No, as far as I know.
I got mine today.. 💯❤
Nice
Penguins: Exist in an uninhabitable island that takes 2 weeks to reach, with the last human to touch that place being 10+years ago
Donny: Prankem John.
I dont know how to say that the black keyboard is more suitable for the light colored table.😂
Im no photographer but just got my Wooting 80 White V2. It looks amazing, could not be anymore happy with it
Don't want to say that I am jealous, but I am JEALOUS..
Why can you get it?
Our orders continue to be backordered.
😢
Should've ordered the wrist rest right away. 40 bucks hurts
As long as you are willing to earn money, you will get it.
Or you can find something else that might suit your needs better.
I really like the soft wrist rest of razer keyboards. Are there any alternatives?
Ive had mine pre ordered since june 2024, so some time 
This rest is different from Razer.
Yeah, Razer's are a leather gel at least the older ones were.
The rest of Steel Series is also quite good. Apex Pro TKL gen3
Why not get a custom one?
I have an acrylic one that's pink/purple that I had chosen for me.
I'm quite sure I paid around $40 for mine.
I already own more than 30 keyboards. 3 of them are 80he.
bro spare some for the rest of us 😭
My feeling is that buying accessories from other brands is not as good as buying accessories from Wooting.
Recently, due to tariffs, the sales of Razer viper mini se has also been suspended. My guests are waiting for it.🙄
guests?
Pi are you in the U.S.?
I think he said taiwan
Ahh, I was honestly wondering how the tarrifs work here in the u.s.
You didn't follow our conversation yesterday. I am in Taiwan.
I have a better understanding of how China's tariffs work.
didn't work unfortunately :(
Then you're either doing something wrong, or the game you're playing doesn't support keyboards.
Me aswell
Where are you from tho?
Im in the UK
Damm
Did you already receive yours?
Not at all
Feels bad
muricans gotta receive it first looks like
Yes
Because those umpa lumpa tariffs are hitting hard
Who tf let his doggo create this equation
elect a clown, get a circus... and somehow get priority
What's the difference between the 80he and 60he I'm new to this stuff
60 Keys vs 80 Keys
60% vs 80%
80he has the F row and some additional keys
It's kinda necessary to prevent high tariff costs
or pass those to the costumers and call it a day, but as a business i understand it... as a costumer, fuck that... it is what it is
From a business perspective it is the only smart move to prevent bankruptcy xD
if everyone keeps getting priority then they wont feel what a tariff is, a tax to the costumer...
wooting is faaaar from bankruptcy
But as a customer it pisses me off but it will be more than joy
hyperbole
parabole
Anadrol?
nah im sorry fam that your country is on a downfall but you elected a clown, cant expect others to bail you out
superdrol
tren
anavar
did you even research how their voting system looks like? Complete mess lol
hrt
mk677
Everything that requires a vote is irrational. Just like we don’t let vegetarians and meat eaters vote on what to eat.
Everyone has different ideologies, and forcing everyone to be the same will only cause our 80he to be delayed again and again.
🙄
I agree, but if you vote face eating leopards you should not act surprised when those leopards start eating faces
Honestly I was looking to start testosterone
Just to juice for the love of the game
what...
It is not clear from Wooting's hub what caused the order to be delayed.
If you're not at your natural max it doesn't make sense lol
When you get off, after a year everything will be gone
Read the latest #📦│batch_updates
Yeah it’s one of those things you gotta stay on forever
I mean, your heart gets bigger, because it's a muscle too. Doesn't benefit your health at all unless you do HRT with medical supervision.
I've seen it. But I want to buy 2 more 80he. I don't know if there has any chance to combine it with my order.
Prob not
🙁
a wriest rest can be soft? mine is just pure plastic
Ya, Razer's is like pleather + a gel.
the keyboard works, my initial issue is the gamepad emulation isn't working
I honestly don't care for it.
Well of course not. That isn't something that'll work on consoles. They only allow genuine controllers to function as controllers.
As I mentioned previously - It'll work as a keyboard.
okay I didn't know that was obvious information, my bad I guess
Unfortunately there's not much we can do about that. We're essentially creating a fake controller - which is lacking any licenses or anything. While there are some devices out there can can achieve this, Sony and friends are actively shutting them down.
yep, they are even putting updates so cheap better controllers that are not "approved" dont work either...
yeah its expensive to get the lab work done unless your insurance covers it but I rarely see pts who get it covered
i just orderd the 80he how do i see the estimated delivery?
Right corner there's a person icon > your oders > click my orders on the left side > click on order > it'll show estimated delibery time/ect.
ty
No problem.
can i change the Shipping method?
I'm not sure but if you click on the order there does show an Edit icon, reuqest invoice get in touch, and cancel your oder. It might be allowed to be changed until the delivery has been submitted for fulfillment.
Then just stay natty. Really not worth trust me.
in one hand you get more gains but lose a lot in the other hand
has anyone with the gt 80 had any issues with the daughterboard being loose?
and you still dont have it?
like hard?
some of us dont have it yet nope, and due to the fraking politics of murica we gotta wait longer...
i forgot about the na brothers
i ordered mine nov 2024 and got it early januari. but i live in the netherlands so it makes sense id have it quicker
Im not murican, i live in the netherlands
but those guys gotta be prioritized before they have to pay 145% over everything electronic
yeah, vote a clown, get a circus and somehow prio on everything
Hopefully next week is my last week of waiting... big hopium puff here
they are probably the biggest consumer of wooting
hence priority
when did you order?
yeah its a big loss, ik where I our we only do it for pts above 40
is there any wooting 80he compatible plates other than the factory PC plate. If so, where can I buy it
just swapped into the friction fit and optimum case + keycaps. i'm new to modding but i've gotta do something about this spacebar, it's so loud and clicky sounding. any suggestions?
Is it rattling?
If it rattles, lube and tune stabs, if you want to lower sound, space bar foam
If you dont want to tune the stabs you could get a set of premium stabs (knight v2/yikb screw in stabilisers)
You will still need to lube these tho
what u use for your xlr interface, looks nice
Thx bro . mic is fifine
just got another order for wooting 80he module
any raw zinc users review as it was mentioned in yt that the oxidisation changes colours in long time
Wait can I connect my 80he to my phone?
Do I need any sort of converter to connect the 80he to consoles?
Only android ig
iPhone sucks in this case, only wireless connection
Nah, works fine with my iPhone 16 Pro Max. I thought supplying enough power was going to be a problem, but it wasn't
common iphone w
Ye
I forgot bout this
Because type-c not lightning
Had mine for quite a while now no signs so far 
It does have a coating to prevent oxidization so shouldn't be a huge issue
Alright thanks, I will order one soon enough then
https://help.wooting.io/article/106-how-to-use-your-wooting-keyboard-with-playstation-xbox-or-pc-bios-nkro-off
You need to set it up on PC for console use. And then be at peace with the fact that it'll only ever work as a keyboard on consoles, in games that support keyboards.
This article helps you out with some of the issues and quirks you might encounter while using a Wooting on a console or in the PC BIOS. What is nKRO/6KRO, and w
ok
One of my stock switches has a weird clicky sound when pressed, ideas on what it could be or how to fix it? Or do I just replace the switch completely?
take it apart and figure it out
is wooting making a silent he switch?
any cool new switches out? 28g still the lightest spring? 😄
28?
💀
Lowest we make (springs for) is 35
you need 10g springs or what
hell yeah.

I did try the 80-100g ones, very exhausting indeed. Must be for people with heavier fingers.
for people that used to use heavy mech switches
i'm trying to get use to with 50gf
but still 68-75gf is the best option for me rn
there are owlab ti he switches, 35g initial, might be too heavy for you i guess💀
ya those are bricks for sure.

pen springs? like just find a random pen and use that spring? lol. Prob won't be HE compatible. +length issues. 😄
wish we could use the MX springs, because they go down to 15g
i think there is a pen spring which is not magnetic
just wait for china to produce it
prob gonna take a long while, need demand/more people using HE KBs
in china's market HE is already sky rocketing
industry moves at a snail pace. Take a look at how long lightweight mice are taking to catch on.
just wait for the demands
ya hopefully
most likely outside of china
because in china they can release a brand new board every 2-3 weeks
28g is still the lowest for many months now.
even ipi released a new kb, and latenpow released a new keeb (wooting 80 clone)
yeah new KBs for sure, but not necessarily springs.
there is not much of demand i'm pretty sure
ya that's what I'm saying. Rough
u can buy duhuk's spring are also 28g
Wish Wooting would just do it. 15g springs BB. 😄
but I think I'm solving the issue another way. I'm trying washers to reduce travel distance of the keypress. So, in essence, I'm feeling less of the rated bottom out force.
so lighter springs might not be nec.
Yo
1g spring meta, if you can’t telepathically press your switches what’s even the point right
no, just do 0.005mm actuation with the lightest spring. Even a breath can trigger it
Has anyone tried the torontokeyboardman + gamezone bone 80? How does it compare to the gt80?
Who is all founder and co founder ?
Erik, Calder and Jeroen are the three founders.
🫶
The fu...
just seeing
Don't ping staff or moderators, unless you need help with moderation.
it'd be funny if they responded
noted
how many switches are on the wooting 80he?
84 ansi
85 iso
87 jis
so if i get 90pcs of a switch that shud suffice even if i get a few defects in the batch?
yes
Very smart, boi. Do you have a self-preservation instinct?
No.
the wooting 80he already has foam mod right?
i was asking bcs of the person above just was wondering
Is it normal that the USB C cable is a bit loose on the keyboard?
Wouldn't really call including a case shaped pad of foam a "Mod" perse, but yes. 🙂
White 80HE Zinc case available on website rn in US
hi guys. any league profiles?
didnt find any there
@buoyant solstice is wooting working on making a silent switch? 👀
We have not announced any such product, no.
Mansen means yes
He cant say it
Looking but not developing yet. Need to find out how to both silence yet keep satisfying. No off the shelves solutions available that we can tweak.
Now lets over analyze calders response to get leaks

gateron genty """""""silent""""""
Hey guys how come myu wooting 80he can only cycle throught profile 1 and 2, i have profile 3 and 4 but doesnt cycle with F13 key
Hello, i was disasembling my 80HE and this rectangle fell out but i dont know where it came from, where did this come from?
It’s the led blocker
For the light bar
Oh okay, so thats the rectangle hole on the left that would go in
Because the default keybind has that behaviour. You can rebind MODE to CYCLE.
how do you have leaks of the new wooting air 0he+?
Did you end up getting the switches?
Anyone know if you can combine the top housing of the plastic one with the bottom housing of the zinc case? Either straight away or with a little DIYing
You cannot.
Not the kind you're probably thinking of. We don't do holiday discounts or anything like that. Only discounts applied for bundled items during checkout, and for repeat customers.
thats what i wanted to know
Showing up today
Says out for delivery but you know how that game goes lol
I should get mine next week, I’m excited
just ordered mine yesterday
if i order 80he today how long would i have to wait?
they're in stock last i checked. mine was ordered yesterday and they said it would arrive anywhere from the 25th to the 9th
not bad
ikr
which options did u get?
I got the white zinc specifically and they still waiting for it to arrive in their facility
But it arrives to the fulfillment center tmm and should arrive before may 1st
i went with the basic black plastic one, though looking back, i could have gotten the ghost option
also got the wrist rest
i didn't want to get the zinc
Same needa save myself from carpal tunnel
I just like my white peripherals
Mainly your location matters but it also tells you the estimated date before you order
I got the black Zinc because I'm not a fan of plastic
I would guess a week, that's how long mine is predicted to be
for those of you who own one, what is the default cable like
is the detachable cable worth springing for
Checkout will provide you with an estimate
Only if you want a coiled cable.
MANSEN
They called me a madman @buoyant solstice it works! And no looseness at all
I guess you proved Kevin wrong cause I specifically remember him saying this wasn't possible.
🤔
Zinc top on plastic does not however cos the legs are differnet hahah but the plastic doesnt have legs so it fits and the screws are more than enough
It looks soooo good (pics dont do it justice) or at least phone cam doesnt
same...
and arrive on 19th may - early june
probably the distance from you to the warehouse affects your delivery date
that's what someone else had mentioned
nooo, because i bought the module version
and it's a pre order
oh.
kinda sad tho, but i spent most of the budget already on gt80 case & couple set of switches
80he ordered
good stuff @grim adder
and tax in my country will be more expensive if i purchased the prebuilt version
i bought wooting plastic case (for the daughterboard) and i purchased a gt-80 case from kbdfans
oh how convenient!!

anyone know if the white zinc 80HE will be available to order anytime soon...?
Depends on how crazy Orange Man is going to be in the next long while.
Nice, mine just came in today.
should i just cancel my module order and purchase the prebuilt tho?
Time to install lol
I only bought the Wooting 80HE module by itself (no case or extra parts). Will I run into issues if I 3D-print a custom case, or do I need to order a pre-made plastic one because of the daughterboard?
You're going to be lacking the daughterboard, JST cable and USB cable, if you don't include a PCR case from us as a minimum.
Should i cancel the order and make a new one with the case
That would be my recommendation. It's going to be tough to find a daughterboard, JST cable and USB cable for the 10 bucks we're asking for a PCR case.
OK thanks
This finally doesn't scare me to do lol
Hmm imma list my keyboard for $10,000 on eBay for fun
Scares me dude
I cannot wait to start using my F keys on my 80HE in LoL
Nice, let me know your thoughts. I'm obviously still waiting on my board. The case & keycaps will be here before the actual board will be.
Which case did you go with
The Purple
Gt80?
Yes
Noice
Thes Geon Raws are probably fuct now
Such a pain to get out and a lot of the little holding clips are no longer there lol
very common
I'm not sure if I should order stabs or film or anything else.
The only thing I'm not sure about are the keycaps.
Keyboardman kit comes with foam and film
And I def like my upgraded stabs over the stock ones
Mind sending me the link to that kit again. I think I lost the link.
Honestly, I just really don't want to relube everything.
The most powerful modding kit for Wooting 80 HE Exclusively designed for the Wooting. Now revamped for the 80% layout. Modding Kit only, Keyboard not included. Not compatible with other keyboards. Why mod your Wooting? Sound profile: fine tune your auditory experience; whether you like clacky, marbley, or thocky. Modif
I can see the white pom plate in the photos. That's keyboardman.
The black foam under it as well replaces the wooting gasket
I think I currently have White POM in my Alpine65 but I also have Carbon Fiber and Brass.
You can see *
I’m still trying to look for key caps but nothing stands out
Gotcha
Yeah, that's my issue.
They look slick with the dark stabies too
I lost my 10 degree stands that go into my keyboard during my most recent move into a new apartment. i ordered my 80he 3 months ago. is there a way for me to buy just the keyboard stands on the website if i'm not eligible for a refund
Pick the category and issue you need help with, and we'll guide you through the process.
anyone know what keycaps kbdfans use in ther example image with their shell?
which ones are these?
thx
mannnn these switches feel goooooooood!!
also happy my board turned back on and seems to work lmao
i relubed the stabilizers on my 80he and the extra lube def made them feel nicer to me, still not to fond ot them to
which ones did you end up using?
I just switched out geon raw he 50g for owlabs he ti 40g
I kinda figured it would be a waste of money but not at ALL
the weight makes a lot of difference
they sound better, feel more stable, and I guess I like 40g better plus I belive the travel is shorter
i use l45 v2 rn
I won't be putting the raws back in these are amazing
sadly still heavier than the lekker 45s
im still looking for some better sounding switches with the same weight
you can swap springs
^
You can move your L45 springs to owlabs
oh they are the same?
difference isnt massive, only 5g
I highly suggest these owlabs
i am specific like that
you can use lekker springs in them yes, diameter is the same
good to know, thanks
youll need switch opener and some time of your life
shit ton of effort to spring swap that many
like i said at that point might as well lube
i have the tools do it it because i spring swapped some to 35 to test that out
they start at 30 end at 45. the Owlab Ti start at 40 end at 50
big difference tbh
you notice the starting weight the most, since most keystrokes in gaming you tend to not bottom out the switch, adleast i dont
initial force of owlabs isnt listed
its right there
40 and 50 are options
oh
not initial and bottom out
no yeah im a mong i see now
i completely forgot you can get 40g
tbh im more interested in the starting force then bottom out force
if its more sensative than the l45 i might activate them when resting my fingers on the switch
40g on the owlabs feels better to me than 50g on Geon raws
Less stem wobble too which I thought was already good on the raws
Hopefully that translates to gaming so far that's typing lol
actually, whats the heaviest switch?
I tried lekker v2 60g and now on geon raw 50g, Im interested in finding heavy ones for racing
most switches max out at 60gram because thats where the baseline is, could spring mod lekkers
i doubt any switch is gonna be as heavy as the l100
theres above l60?
no, these are springs
you can swap the springs inside your l60 for l100s. to make them heavier
ohhh
https://www.youtube.com/watch?v=_VKobXffM2Y their tutorial
🛒 Lekker Springs https://wooting.io/product/lekker-spring-packs
🛠️ Switch toolkit https://wooting.io/product/blank-switch-toolkit?Option=Switch+tool+set
Purchasing a spring pack is an economical option to alter the feel of your switch without the expense of buying a whole new switch pack, which can be significantly more costly.
✨ Foll...
ive done my arrow keys, doesnt take to much time
great idea btw, might try heavier ones on my arrow for racing games
Yea, I noticed that from 60g to 50g the throttle was way lighter bcs theres no force pushing back
what racing games do you play?
So when I felt this I was wondering if theres any switch that is heavier
i had trouble setting up the analog movements for alot of games
I tried out ACC, AC Evo, FH4 and Forza Motorsport in this aspect. I have plans to buy a sim setup soon
sick man
did you get your 80he to work with the analog controls?
same profile for all of them?
The 4 games I tested all used the same steering and throttle inputs like on controller
the only thing I needed to reassign was the shifting
idh it rn, I think wooting has a racing profile by default
u need to enable gamepad mode
the most annoying one was cyberpunks driving, couldnt get it to work
ik, just didnt figure it out last time i was messing with it. might try again tomorrow
lets see how these are
100gram would provide alot of control lol
Only if you want use gamepad
that is my intention
put them in my arrow keys and use them for driving
my entire board is l45v2 rn
hello guys, what are the differences between 60he and 80he
ok so 80 he doesn't have rapid trigger andrappy snappy and socd that's to bad
no they all have it
so what are the differences
he literally posted it
8khz polling/scanning on the 80HE, comes in metal case options prebuilt to name a few.
from what i see in the post and about what you told the differences between 80 he and 60 he is the size and poling rate is higher than 60he and what you suggest to let me pick up between 80he and 60 he.
Pick the one where you prefer the layout
it's more of the layout, do u want 60% or wooting's 80%
Good morning, question: I am planning on buying an 80HE Zinc and I see I have the option for both white and black, however the white says it is expected for the 23rd? I'm guessing this is just a preset that it will in the near future be available, but is that witin a few days/weeks/months? Does anyone have an idea? Or should I not get my hopes up for the white one :D.
What makes you say that? If it says they're expected at the warehouse tomorrow, then that's the case as best we know.
The reason I'm saying that is cause I have checked multiple times the past days 😉 and it keeps shifting forward. That's why I was asking 🙂
But thank you for your response. Then I will wait for now.
Ye i think its a bug, it was doing that for me too before, just kept saying the day after
i know they are shipping out past orders of white zinc today and tomorrow tho... so if they have extra maybe
How does one come to this conclusion
i got it from the picture that i saw
Then you don't know how to read a chart 😄
Cause it's clearly saying that ALL of the keyboards mentioned have that.
yeah
We're actively looking into it.
I have the same question. Because my order originally showed that it would arrive in the warehouse on 4/17. But now it has become BackOrder.
So I also want to know whether the white zinc alloy arrives at the warehouse today?
what you suggest me to pick 60he or 80he please tell me notice that i haven't tried 60% keyboard before
If you don't care about the arrow keys or the F button, then choose 60he.
If you just want to use it for gaming. And you have another keyboard. Then you should choose 60he.
But if you only plan to buy one keyboard. And you only have this one keyboard. Then you should buy 80he.
if you havent tried 60% get 80he, its still better overall keyboard
There is only one reason why people usually consider 60he. That is they have more than one keyboard. And they are masters of the game.
Or they like going to tournaments and LANs...or have a small desk?
If you really don't like big bezels, I'd say 60he since the 80he does have bezels big enough for me to prefer 60he for osu
ok, I will choose 80 he and thank you so much, guys, for helping me to pick
80he is better in every other way ime
What is the scan rate for the 80HE?
a bit above 1khz without tachyon and 8khz with tachyon if i recall right
1600hz iirc
what is the best 8khz 60% keyboard under 100
venom?
venom is not under 100
really depends on what they consider a keyboard
im talking prebuilt
pcb is under 100 tho
yeahhh good luck with that
good luck
pcb, you need stabilizers, plate, case, keycaps, switches
MCHOSE ACE 60 Pro Magnetic Game machinery Keyboard In today's competitive gaming environment, choosing a high-performance keyboard is crucial. The MCHOSE ACE 60 Pro series gaming magnetic switch keyboard is designed for players who pursue excellence, making it the ideal choice for mainstream game...
technically you dont need keycaps, case or stabs or a plate
is this one good? it has 128k scan rate idk if thats legit
just saying
Seems SO legit
you dont need an 8k board
yeah i only know wooting im asking for a friend
that keyboard is fine for the price but dont expect consistent firmware/software updates.
tell your friend to save more money and get something better
and no its not 128k scan rate and iirc if you press 10 keys at the same time latency jumps to 10ms
or find a used wooting/venom
tell your friend to save money and buy tigerlite venom from kbdfans + build service costs like 8$
Mb sayo pcb
i think he wants a 60%
possible to build a <100usd
Ye
use lucifer's
just find a used 60he
theres no 60% i would recommend except venom and wooting
both are expensive
sayo is good imo, i have build it for a friend once
the owner gives fw & software update..
but certain translation is kinda odd for now
im sorry but sayodevice isnt good recommendation
it might have good performance but the software is ass and you dont know how long it will be supported
Best I can think of is Nuphy Air 60. But idk if it's true 8k and it's low profile. But it's still above 100 and might as well get venom at that point.
Sayodevice is crap, sayo pcb is mid
i've talked with the owner on QQ..
and it's not a horrible board for the price..
for a low budget build, it's definitely good
don't expect a lot of things from a 40 usd pcb
does venom have frequent firmware updatesa
People looking for insane sub 1ms latency to beat someone in silver meanwhile Jimmy is hardstuck at max rank playing with a 3$ keyboard they found in a dumpster
Placebo maxxers
venom 60he does not have frequent firmware updates.
hello what is the best switch between lekker -linear 60 or 45
Official verdict in. The Owlabs HE Tis feel much better than Geon raws and I won't be switching back lol
can you explain more if you may
they are same, just different spring weight
although i recommend getting owlab ti hes over them
the one you like
go for owlab ti he instead of lekkers pls
as for keycaps any that look good to you and fit within your budget
if you have some color preferences i could send you some or point you toward vendors/brands
why
less wobble, cleaner sound
ok what about layout and language ANSI OR ISO
what do you usually use
ANSI has more options for keycaps but you may not like it and it has 2 keys less than ISO
BEFORE I WAS USING ISO AND THEN LAST 3 YEARS STARTED USING ANSI
its up to you
what you like more
no performance difference but it may be easier to find a keycap set in ANSI
so if you really want to use ISO go for that, if you dont care, then ansi is probably fine
Still waiting mine, this week will arrive I think
I PREFER TO FIND MY KEYCAPS EASIER
then ansi it is
OK THANK YOU SO MUCH

iso is so bad
ansi superior
Average iso haters
i am ISO enjoyer
ansi just kinda feels weird to me
tho i can see why long left shift would be nice to have
after i used ansi i just couldnt use iso
i have used both and own both
yeah that and the enter it dont take up like half the space
ansi still has less keys than iso
If you use more than one language for your daily life, ansi just doesn’t work
doesn't work well at least
And this. Small enter should be a crime
is this why ansi people get so uppity by the mentioning of iso
it reminds them of their shortcomings... somewhere else
probably
If you only speak and type on plain English probably you can get used to any and would find ansi more comfortable.
But ISO provides a lot more granularity and adaptability to other languages
theres your issue
anyone know what keycaps these are or where i can find similar ones?
use lens bro
bro its not smart enough

tf
