#🌟│wooting80he
1 messages · Page 217 of 1
i hear a lot of people go for knight v2 if they swap from stock
I ordered module so im building from base also tape modding
After a bit of typing this ends up happening.
O
lol
does anyone know a retailer in EU that carries the v2s, deltakeyco sold out. and import will be too expensive shipping wise
he chose death
What exactly are u looking for
It hadn't happened for a couple of days, then I start work today and it's back 😭
long pole knight v2
Honestly it happened to me once earlier, I just tapped my A key and shit detached
i think u can preorder them on mechanicalkeyboards
I’m thinking it was the keycap fault but unusual
Man the double push back this month 😭😭😭
Nah tbh same happens to my spacebar on my polar65
Set up in the mean time
What would be the most accurate way to interpret the data from keyboard inspector, specifically the frequency domain?
Not sure if this is the intended way the stabiliser is meant to work on the enter key compared to other keys. On the backspace stabiliser stays up and feels totally different.
Probably just a little thin on lube
Ninjutso and their fake 8k dongle promises still stings
this is signal analysis (electrical engineering field) and it's difficult to summarize in a few words, you can try reading through this section to get a higher level idea of what's going on. good quick rule of thumb though:
-
if you get noise (like in your last review), discard the recording and try again with less hardware stress (safe mode is usually the fastest and easiest way to get the most accurate results)
-
if you get a single clear peak, 99.9% of the time the peak is the polling rate, and the scan rate is >= the polling rate
-
if you get multiple peaks or something complex, then there's a few scenarios, maybe the scan rate is lower than the polling rate, or the keyboard exhibits some weird behavior, either way you're then trying to work out what kind of processing would have to happen to the input signals for this kind of peak pattern to show up. this requires a good intuition on signal analysis (how sampling stuff works)
its giving that 90ies vibe 🙂
Is it normal to take that much time to appear my order? I already paid everything and it still doesn't appear.
3 days
are you using the same email as you odered with?
Yes
Thank you and I was just reading through that documentation as well. I'll make note of this in the future.
support time 😉
I already ordered uwuting before and everything was fine
Got any mails maybe in spam about payment verification?
If you paid with SoFort then expect it to take a few business days
Today is also a bank holiday in the US, so add one day
Holy moly @zealous oak , my expected delivery date is TODAY!!!!!
I paid with credit card, i dont even know what SoFort is
Then indeed reach out to support
And that doesn't mean you couldn't have made a typo this time 🙂
I got clip of everything, I know it doesn't serve as proof but at least i can check if everything is correct
give him time
Never was interested much in it, otherwise great mouse and very much improved from the previous 2 soras
I do wanna hear his opinion as well
Yeah I like the beige look
probably my favorite keyboard in terms of feel
At any rate this will be resolved via email 🙂
My question is about the stains or marks people have been reporting. I'm a RAW user myself so particularly interested!
i wanna get the sora v2 but idk if the thin stock is 4k pollin rate donle
since i aint a tryhard/pro Im not considering the 8k polling
Comes stock with 1000hz for the max polling
idk where to buy the dongle
Most pros are not using 8k, simply just not a better/noticeable feeling
It’s not available
i mainly dont want to get 8k cuz i heard it stresses the PC more compared to 8khz kb
I don't know what's going on with them but 8k mice are just battery burners anyway. I never run above 4khz
i run on 1k with the superlight and I charge like once a month
since superlight is well…. 1k
@forest flume 8khz in safe mode w/tachyon on:
It does depending on your hardware, also it’s just unusable for dual monitor setups
wdym unusable for dual monitor?
Moving windows across displays is a struggle, you’ll have to flick really hard
yeah nobody can really touch logitech when it comes to battery life. The SL2 has equally good battery life, so good in fact that I removed the stock one and put in a smaller lighter one and it still beats chinese mice w/bigger batteries (both run at 4khz)
funnily enuf my SL1 nvr dropped below 50
there you go, perfect 8k
Nice!! Mine is still the same
No update
I never had sora v1 but heard good things about it. Dunno what's up with ninjutso though. They tweeted a pic of the 8k shell months ago and then nothing. Hopefully they don't just forget about it and release a sora v3
Great, thx for the confirmation.
Oh you are having fun today, nice to see you already have it
Sorry to hear that mate! Here it did update this morning saying is out for delivery! So fingers crossed!
I'm not leaving the house even for drying the laundry 🙂
I hope you receive it soon today
Time so long
Will send an update as soon as it's here!
received de wooting

Just a question, for the founder key switches, is it in one of the packages because I only received 1 pack of switches
What you got is correct
yooooo support answered me
where do you see this? 🙂
i feel bad😭 they are giga overworked
ok just checking
Lots of happy folks today
😄 🤠
calculating for 5 days
where are u from
is this reply is just automatic reply? will they send reply email later?
bruh i can't see the email💀
I'm glad I'm not na
oh sori this one
and this 1
this one probably but idk
I'm assuming it is because u put the na damage thingy
I got a new message from DHL giving me the update and where to track. There I can see the package is already in Lisbon, and out for delivery.
I wish we got DHL for these in NA. Mine came in a bag from USPS looking like it was kicked, ran over, sat on, chewed, and thrown at my door
I am planning to order 80HE zinc alloy, I am from India any advice? I hope there isnt much customs restriction to get my shipment? Any info on this would be helpful
They are unintentionally skilled tho, because none of the actual components were damaged, just the box
Expect to pay heavy import duties on delivery
yeah, this
Also, they aren't in stock yet right?
Is wootints customer support good?
any idea on how much extra? I tried to e-mail customer care but seems they are busy and need 2-3 weeks to respond 😄
From what I've seen, yeah
You're asking the wrong people. Contact Indian customs.
Just bribe them
LOL
lol
Good stuff do you know if the wooting 80he comes with warranty?
https://wooting.io/policies/warranty-return-policy
4 year standard warranty, 2 years on the LEDs
An overview of our policy for the Warranty/Return/Cancellation Policy
W wooting 😩 i would've been so sad if my keyboard broke within like a month or two and I wouldn't be able to fix it
I've had mine for about a week now tho and it's amazing
I heard from some friends that the 60 came prelubed but not enough, but the 80he is literally perfect
https://www.reddit.com/r/WootingKB/comments/1ceor5j/i_am_being_charged_inr_12358_by_fedex_for_custom/ this explains so it seems the customs cost is around 75% extra of the product value
16K subscribers in the WootingKB community. Welcome to the Wooting Reddit. Share your keyboards, analog profiles, experiences, problems, feature…
wth
I rather travel to their warehouse and get one for the experience
The trip would likely be cheaper lmao
well atleast not useless like paying duty 😛
lol
my up arrow key doesn't work and i'm not sure why, but when i hold alt and use it it seems to work (albeit it does different things)? does anyone know what this means/ how to fix
Like i said, bribe the Indian customs officer. I heard bribery in that part of the world is rampant
Have you tried resetting the profiles on the wooting hub?
yeah mb
is that the reset device option?
Maybe look at the profile you have and see what your arrow keys are set to?
tried resetting keyboard settings, arrow keys are set to arrow keys
or at least thats the default after resetting
no luck
ive also had some instances of my keyboard sometimes stop working randomly (no keyboard presses do anything) but the leds are still on. i have to reconnect the usb c to the keyboard to fix it, maybe that might be it?
Seems a usb power issue. Set it to 1000 hz and/or try a different port
ok it seems my up arrow key is still acting strange
it definitely works and i can see it actuating, but it doesnt do anything
I know mate, from what I've seen people posting here, this seems to be a NA thing. And even the stealing of parcels and stuff I see on the web, is this for real??? Like, can't imagine this happening here in Portugal.
like when i try to edit my discord message or scroll up a page, nothing happens when i hit up arrow
Super happy to hear this!
hey guys i tried searching online but i couldnt find a solution. is there any way to make a key spam itself when holding down the key?
hold on though i haven't tried the computer restart feature let me do that first
If you see it actuating in wootility then means the switch should be functioning.
My experience with it was good 👍
It is done.
Will you cerakote it over time?
Maybe in the future, for now the raw zinc matches the retro keycaps quite well already
hahahaha the computer restart worked, thank you all for the advice
IT expert over here
where u buy this kycaps?
Sexy MF
I'm gonna get a hotswap mouse so when I get a wooting80he then I can hotswap my hotswap 
in korea, but i'm sure they sell them elsewhere. They're called game1989
uhuuuuuu! Nice mate! tell me moreee!!!!
Sorry., not about the keycaps, the keyboard 😄
between now and July 2025
HAHAHAAH
heard they'll be one today
they said yesterday ' during regular business hours CEST Monday the 14th of October'
yess
very exciting
they didnt say which year
he did say 'tomorrow' haha
2019
2019 is still in the future for some calendars
People assume that time is a strict progression of cause to effect, but actually, from a non-linear, non-subjective viewpoint, it’s more like a big ball of wibbly-wobbly, timey-wimey stuff.
did you write the Terminator franchise?
one of the nice everyday examples is gps
Idk I just never blink and that's enough
true
Wooting prebuilt 80HE owner here
Latest firmware + default factory settings
My wooting 80HE keystrokes sometimes get stuck like I am holding the key down. Has happened every day every few hours. Notably on WASD which are common keys to press. The light shows like the key is being pressed down, but it is not.
I have to pull the USB out and then back in to reset the keyboard and then press the stuck button again to fix it.
I am on latest wootilty firmware and this has happened since day 1.
Is this a software issue? Is it a switch issue? Is it something else? This is causing me a lot of issues during gaming.
Anyone else have this issue?
So we don’t receive the 2nd key switch pack?
if you ordered a prebuilt keyboard you are eligible for the switchpack
if you ordered a module, paid for a pack of switches, then you are also eligible for the free switch pack
best to make a post in #1019755933959733258 might need some troubleshooting
seems like batch 2 finished mass production, my order went from mass production to shipment to their warehouse
Measures yarn weight and how durable the material is - the D stands for denier. 1680D = strong and waterproof
At least for Polyester
Same but very rarely - I heard it’s something to do with voltage spikes or power draw, but could be something else AFAIK. Would reduce the polling to 1k for now if you experience it often
I have set it to 1k polling now (was default 8k polling). Gonna see if it happens again today ( Happens randomly every few hours)
yep set it to lower polling and it seems to fix it for most folks experiencing the problem
If you bought the module and didn't select a pack with it, you won't get two. The L45s are the free switches you get w/the founders campaign
On the Wooting.hub link for DHL I also only got the update to out to delivery, the DHL link I received by email had more information (it is a different link)
mine went to india for awhile i assume stopover/refuel lol
but thankfully fed ex is fast it went india > china > korea all in a day
Mine shows still in transit, I only have 1 link
Did you finish putting it together?
Curious thing is I'm from mainland Europe and it's taking longer lol
I slightly overlubed a couple keys. The OCD in me wants to pull them out but i think the lazy side of me won't
I only got the second link when the package arrived at Lisbon distribution center
Did you pay 9,99 for shipping @zealous oak ?
Yes
Yea I ordered module + 1 pack L45s, so I should have received 2 packs?
wow no updates today?
Try asking one of the wooting team members here
nice, I might have to get that wooting wrist rest
If its a couple just do it. Personally cant stand the inconsistent feel haha
I might but these geon raws are harder to pull out than lekkers. I almost damaged one earlier
Only thing I'm regreting now is not getting the ANSI module 😦
ISO-PT keycaps, cherry profile, are a nightmare to find
Today is batches update ?
When I have more money will probably get the ANSI module, and then really start enjoying custom keycaps
They are tough but you got this mate
fuck UPS
Think I won’t bother, switching to jades in 2 days time
thanks tho
sorry couldn't reply earlier. from what you've described i believe you should be eligible for the free pack. feel free to reach out https://wooting.io/support
Pick the category and issue you need help with, and we'll guide you through the process.
Ah it’s so good to be back on rapid trigger
How is the experience with 80 HE so far?
Great. Zero issues so far
Is the key mapping on board memory?
Yeah it’s saved to board if that’s what you’re asking
Thanks
Discover custom mechanical keyboard vendors in your region! A long list of vendors is served to you on a beautiful interactive map. Search and filter the vendors to fit your needs.
your best friend
Still waiting for the update….
turn to the dark side and switch to ISO-US , PT sucks :p
Big enter button and big left shift will always have my heart
Is there any new info on the white zinc case?
where did you get that white cable that's connected?
Osume
Job’s done 
Where to buy keycaps
Questionable font choices 
But looks very nice 
Can I buy it on amazon?
Sure, Amazon, Aliexpress, here's also a list of vendors https://www.alexotos.com/keyboard-vendor-list/
new keycaps on the way, these were just lying around the house
Mine are coming soon 

I love this one 
where is the batch update ?
soon
yesterday he said will posted today yeah?
yeh
he will probably post it last minute to torture us all
within working hour, idk how long he works but I just assume until 11pm his time
23:59 someone has the night shift s standard working hours 😄
That looks so beautiful
What switches and key caps?
and still no design files 
yeah I got my order edited late yesterday and I'm so thankful for that cs man
is it worth buying wooting 80he over 60he? cus they have 80euro difference so idk what to choose
its preference
they do have cs outside of europe so could be one of those cs agents 😄
definitly new keyboard why you wanna buy the old 60he not worth it
80 euros?
How long it takes for KDBfans to ship in Europe casualy?
Indeed - Would be rather cruel to force our Taiwan customer support crew to work EU hours.
yea
A few do - but that's entirely their own choice.

go for 80he and thank me later
on their site wooting he80 costs 220euros compared to wooting 60he 160euros
tbh I really like non standard work hours, so I guess thats why they do it too 😄
dafuq?
bro I know better
60he is not worth it at this time
just shut up lmao
some people like smaller boards
we almost 2025 and you want him to buy 60he come on now
youre definitely a troll alright
oh damm im dumb the module only costs 155
good luck
nw
i hate the 60 form factor but come on.. it is a very valid choice for a lot of people
l45 for now, switching to jades once they arrive, no idea what keycaps, bought them long ago
Gotcha
bruh you trolling ppl wanting them to buy old keyboard
Buy 80he

be honest man
certified yapper
wrong reply
coz I said the truth
also there is 100% variant it is no good?
Spend 20$ more for 8k polling, improved switches and a more future proof keyboard
Your truth maybe.
wow
its nicetohavehair, dw abt it
It’s worth the difference
well said I wish there is more ppl like you
coz here they wanna my guy buy old keyboard
in 2025
💀
I wouldn’t call the keyboard old by any means but it’s definitely worth buying the 80he for the improved layout, future proofing and extra features

Especially if you’re willing to already spend like 180$ on a 60he
improved layout
Arrow keys

layout is subjective
and
If you do coding arrow keys are massively important
so the 2he is the best layout
And it’s good for school work
get the 2he
all their boards are good , but go for the new one not board has years existed in their store
the 60he is not outdated by any means
honestly get the layout you prefer
since 2016 btw
nicetohavehair knows better man
everything else will work out anyways
shush
what.
brudda let him be
by that logic the uwu was the top board for a while
In my opinion yes, but I prefer gasket mount and the 80he looks nicer overall in my opinion
real coz most osu players use uwu board not 60he
??
alright why are you talking about osu all of a sudden
Quite a low effort trolling 
also thats completely wrong
saying the truth = trolling wow
its not even close
bros just trolling here everyday, you aint funny bro
And low quality bait follows 
saying the truth made you think im funny dude stop being weirdo
search your messages on the server, youre the biggest weirdo out of 121 427 members
That was awesome! Thanks for that!
is it that hard to be positive?
lol
Its still good, gonna get lekker v2’s soon so it’ll be better
Good option for people who just wanna sweat in comp games
i love wooting support 😻
no you just like masen
I chose the 80he because i play other games too and not just comp games
Well I know I have it
You starting a collection? Lol
lmao
huh
Geon Raw supremacy
You have the 60 and you’re gonna get/have the 80he
A little wooting collection
Oh to what switches?
Yoo thats real nice
Im considering geon raws since they’re so cheap but I wanna get a feel of the L v2’s first
Hope the batch 2 update comes out today
Their kinda was with na-bridge being sent out to sea but an actual official announcements could give more info
oh ya where is the cargo
Dunno, been stuck in the same place since ya need to pay to get the latest update
not updated
personally i like v2s, but i like silent / muted switches
but i get why people like raw he switches, they're nice too
Im sure its like halfway there lol since it arrives next Tuesday
get that 3.4mm trash outa here
smol dicc switch smh
There's a thing called 'extension'
why we shamin the switch 
switch needs those pills the spam emails advertise
🙂
No problem
YEY
I'm so hyped for the batch announcement
I guess not today
The day isn't over you impatient lot 😄
Usually he posts batch updates from 9-3PM
what is batch annoucment
What on earth is that time frame? xD
Any time of day except for 6 hours in the afternoon
Taking 5 announcements from #📦│batch_updates
That's the general average
I mean it's an estimate
Read your time again.
9AM-3PM..?
That's not what you wrote.
that's what i read to be fair
9 to 3 PM.
MEANING ALMOST A FULL DAY 😄

batch update:
"Bob Collins, Australian Senator" Air date: 26/07/1991
Can be purchased on "Clarke & Dawe -The Full Catastrophe DVD Boxed Set" Personally signed at MrJohnClarke.com
Are you european perchance
You only mention PM. Being European isn't the issue.
It's common for american's to list time off like that
In that case you can't even follow your own standards of time 😄
Because common sense means 9 happens before 3 otherwise it would be inverse..
Except when you mean the timeframe extends past midnight.
or the weird timehole that is 12
9AM is in the morning.. 3PM is afternoon..
12 hour vs 24 hour can be a bit confusing at times lol
24h is clearer
AM happens before PM therefore 9 goes before 3..
9-3 / 21-03 / 9-15
And unless you actually say AM to PM, then you're saying 9 in the evening to 3 in the afternoon given the previous example.
Because it's common sense AM is before PM
Not using AM and PM is also common sense.
I didn't say 9PM to 3PM that doesn't make sense
That is what you wrote however.
That's how countless countries tell time..
Now moving on to things that actually matter in life...
Good waffle there fellas productive convo 🤣
Real
lol
Are you apart of batch #2?
Brug
Im on the General Chat room streaming the assembly
Join me and help me, its going to be my first assembly
Came out quite nice last night! I’ll post before/after sound tests later this week 🙂
Is wootility good?
very
Dare I say great
I heard from alot of people it's the best they've ever used
It's true
my unbiased opinion is yes
Way better than Razer
same i like it
No bloat great features literally nothing wrong with it
Is this a batch update for all regions??
No acc needed
what is your unbiased opinion on the rgb effects 
could be better and more of them
Eu and Na batch 2 defo cus that’s what I heard but idk about rest
As a person who's wooting80he time traveled just to get to me if am also unbiased
ah yea would be nice with more
wooting 80he its a good option, for gaming?
ok thanks
Your asking that in the wooting discord your going to get biased opinions lol
Amds keyboards go hard fr fr 11/10
Damn I’m downgrading to a wooting from my 7 year old razer keyboard with half functionality :/
I can't wait to replace my huntsman mini v2
If your trying to get unbiased opinions on keyboards then I'd ask a discord like mech keys but you also might get bullied for trying to get a keyboard for gaming idk it's 50/50
Not actually bullied but they'll talk about the whole keyboards don't make you better at gaming which they don't
Just purchased my Wooting, can’t wait to smash you all in fps games
I just like to feel like my keyboard makes me better at gaming 
I mean I will play better with a new keyboard
Nah bro modded mc rn first to build 128x128x192 block nuclear reactor wins will see what that keyboard can really do 
Watch me
Everytime I say that I get told no so now I just say it makes me feel better at gaming lol
Changes the mentality that effect your performance
I mean in my case my keyboard actually just stops working, long presses keys randomly and is missing switches so it will literally make me better 😭
I feel that
Yeah atp man you just need a new keyboard no wonder it makes you better 
Nothing wrong with my current keyboard but I'm just praying that the wooting80he will let me place floors better in fortnite very slim chance it will but still please bro

any keyboard is good for gaming tbh
masen ur everywhere
somewhere there is a 12yo kid beating your ass in any game with a 2€ keyboard they found on a dumpster
@buoyant solstice
I mean yeah. It IS kind of my job yknow? 😄
ye but ur good at it
just saying 🙄
So if I have a problem with my wooting i just have to take a few steps into the internet and I'll immediately find mansen there to help?

8 year old stats
Health:10
Strength:2
Endurance:10
Swear word vocabulary:100
Setup cost:200$
Skill:godlike
Lit me, serial tf2 player somehow play well with lag spike
My greatest peak as a player was 10years old beating kids on a trackpad with remapped movement and shooting with enter
I should go back to my roots, forget the wooting
yeah so soon today
every time we ask the updates get delayed a bit more 
more than likely
on batch update we got nothing
there is so much stuff
is there a way to turn off RGB for specific keys ?
u can research about
yeah 100%
Idk who mark is but I agree

yeah you color the key leds you want to turn off, black
gotcha
got the keebs, but the box is so damaged as if it was thrown many times
also Rohan why did you do the white zinc to yourself, did you really need the extra wait 😄
Guys do you think mouse is worthy pairing with the wooting80he? It's 8k wireless polling rate 65g and hot swappable 😩
Nah I got v1 white zinc… I ain’t waiting all that
ah good

The red is just 
There’s hot swappable mouse? Damn
That's what I said lmao incott has quite a few hotswappable switch mice it's awesome
not worth $20 looks Chinese and ugly
Interesting.. so what can be improved tho? 
80% of good under 100$ mice are chinease if you don't like the look it is in the eye of the beholder afterall
Idk what the chinease are doing but they cooking in the 60-70$ range
Red means it also goes super fast like Ferrari
Fr fr
does the module have stabilizers already
Yes.
Yea a lot of good Chinese mouse
yeah
probably just not letting get patents and copyright get in the way 😄 they do also build everyone elses mice
I can't think of anything it could be improved on thus why I'm getting it 
but TX stabs way better
Batch update won't be posted in the next 1 minute

I just try to keep the work minimum as I am scared ill break something
Been in a meeting for the last 3.5 hours 🫠
so next 2 minutes?
👀 so 2 minutes?
fire finally batch update
why? they muted and smoother
Nah it means tomorrow
so what was the meeting about tell us so you can delay the update
oh shipment to warehouse
Yup alot of great chinease mice out there bc of this and so many different shapes and feels bc well people have different hands
6 Days ago
you already know why
Lol
That’s not how stabs work
dont bait with wrong info
where's my batch update
I assume the batch update is just saying they're built and on the move
almost 0 rattle
Nah it will be on #📦│batch_updates
Update tomorrow?
no he will provide us with the dates
Today
Easier to tune to no rattle maybe, but you can do the same with stock stabs
Mark has to copy and paste it on there 
Ok
nah the stock are bad first thing you need to replace is the stock stabs
You literally don’t know anything about either of those stabs and haven’t used either lol
Are they? 
true
maybe im too naive
the stock stabs are great, some of them might just need extra lubing
I have both of those stabs right now and tested them both today. They’re both fine - stock stabs need a relube but apart from that they’re fine
Will stabbing my keyboard give better stabilization? 😊
try and send results
Yes, you should also shoot at it for speed holes
soonish tm ping Mark to interrupt him if you want it a bit later
It's now doing 16k polling
Mark started writing the batch update don't ping him
I want to ask you if the order date will change.?
I don’t really think we need a batch update just to let everyone know my 80he arrived today, but I understand the need to tell everyone in support of the geon church I guess
Wdym?
In Geon we trust.
WHERE IS MY BATCH UPDATE
yeah they edited on our orders without delaying them
soon
give us the update Mark
Bros edging everyone
smash him with the zinc case
Update order delivery date to see if it has changed
Every time someone asks where the batch update is, I delay posting it by 15 minutes
when is the batch update?
+15
stop don't ask him about the batch update
What time is it posted then am confused sorry
sooo if we ask enough we can delay it to tomorrow and make Mark a liar?
Give batch update time, it's shy
hey just arrived in chat where's the batch update at
Delayed
Wooo my batch 2 kb is being shipped to the warehouse
this is old
It just changed for me been checking almost everyday
Happened on Friday 
happened on Thursday
your internet is slow
Last year
I checked Saturday was mass production still
You order recently?
nah it was Friday
Shipping on November 5 long time
tell the muricans that 😄
Hello my fellow wooting buyers
they have it a bit later
6 days = 20 Oct 11 Days = 31 Oct
anyway where's the batch update
17 days from now = 31 Oct
mark
@slate rose I changed your nickname for a reason. Emote only nicknames are not permitted.
Fr
31 oct Arrive at the warehouse
For murica its 6 oct
no 30 Oct will arrive
I have been staring at the batch update Channel for an hour 💀💀
My order shows it will be shipped on the 5th
My says pre production😪
if you ask when it is you can spend more time looking ^^
Idek when mines coming because it's a Christmas gift so I don't have the details but when it got ordered yesterday even though it was in ghost color it said it was part of champion 
The information from the batch will not change anything reading it then or a few days later 😭😭
The geon church is excited that you got your keyboard
I think I might get a break
Glory to geon and all he touches
Did you just say you got into the champion batch but ordered yesterday?
we can just make it never happen
Is the 2nd batch delivered by plane to NL?
I don't think we need a batch update either
yeah
thats the spirit 
Uhhhh. So it shouldn’t be that long until it arrives 
This was taken yesterday
anytime soon but they have to deal with the customs
My mom is in china rn 😎
HUHHH
Tell her to pick up my keyboard for me
that's old news sir
I obv know it’s not but heh
Brug will be the only patch where it doesn’t have a patch note

Will it be delayed until Christmas?
Ill bribe for NA-bridge to be put next
Why?
how tf this possible
Ill bribe them back
bidding war
Idk bro i think the ship mines on has a flux capacitor
It's my working theory rn
Thats the only logical explanation fr
Time traveler we have
maybe bugged or something
Cuestion
Probably but I'm lost on what batch it is rn lol
nah they will not
People said prolly on NA-bridge
check on your hub
Can't it's a Christmas gift
Im pretty sure NA-Bridge ended a few days ago
Oh maybe they said NA-whale then
oh that's cute
You can be my christmas gift
The way my family works is they give budget then I find something within said budget then they order it and I'm able to combine birthday and Christmas budgets
I take back my statement
Lol
hey, im using Geon RAW HE switches on the 60 HE+, do they need to be installed southfacing like it instructs on the wooting box - ill be using GMK/ not see through keycaps, but presumbaly i can just turn off the rgb lighting if I want? (like does it really matter?)
Samee here 🙈 my birthday and Christmas present was in fact two combined
Download the driver and wait 80he
it says north
The wooting80he is from my grandparents
The instructions are only to let RGB shine through. If you don't care and plan on turning off the LEDs anyway, it makes no difference.
Now I just buy myself stuffs, no gifts anymore
I'm really thankful for that
Aww that’s nice
every year I get really fat eat cookies dye my hair white and go on a shopping spree
Id love to be able to buy my own stuff and others presents
I bought my 80he for my birthday. My birthday was in July.
That being said, there's really no reason to install them without the light window facing the correct way.
Goat
Wait is that Santa
Mark is writing the update
I am old enough to work I'm 16 just my autistic ahh ain't quite mentally stable enough for a job
but I'm hoping in a couple years to get a job
I’m so dumb
ok, thats what i wanted to know. seem's like it doesnt matter which way you do it if you plan on turning the rgb off anyway. i think i read that at some point there were problems with the switches fitting - like the box instructions say you can damage your pcb if you do it wrong? maybe this info is out of date
W mark
The only potential issue I've heard of regarding physical issues w/ geon switches is with the stabilizers, but there's been little to no reporting on this being an issue on the 80he. If you're paranoid like I am, you could pick up some spacers https://geon.works/products/geon-stem-spacer
Will the 2 batch be faster?
eu yeah na no
Yeh batch 2 unlocked the running shoes
EU will be faster?
YESSIR
EU shipped by plane while NA with water which my get captured by Somalia pirates
No
i thought batch 1 was plane too?
for eu ya
They go through the they go through Pacific Ocean
thats what im saying
Unless Somali has a proxy in Hawaii
Alright guys looks like I've found a new job I'll tell you if I get one of yalls keyboards of the ship but I'm keeping the rest
batch 2 will be the same spees as 1
I have told my gang to steal the 80hes
nah
There will soon be 1000+ 80hes in my basement Muhahahaha
Pirates are well known for their love of keyboards
he said tmrw he'll be here
Don’t jinx 
Rookie numbers
Why NA get water
I slid him 200 to make him deliever all the 80hes to me
Why cant we fly
If I didn’t buy the wooting I could’ve paid the captain more :/
Good question
skill issue
NOOOOOOO
How many days will the 2 batch of EU be delivered?
nooooooooooooooo NA 80he boards gone
Because US customs SUCK
Fuck em
It would take even longer to deliver if they did it through plane
Because of US customs
Is it updated now??
Check the wooting hub yourself buddy
Just wait
I saw it
Just be patient like how we waited till November for our keyboards to even finish production
just gotta watch the vessel finder now
It aint even November and production got done at like the beginning of october😭
Sorry sorry
yeah we were lucky the mass production ended without any problmes
ETA to Los Angeles is Oct 22
Frfr
First is worse second is best as they say
oh its there
ITS HERE
YASSSS
YES
Batch update
Where

Wait we have to think about this what country owns the ships....
Oh ye
Damn US fulfillment got shipped first

NA Bridge update 😭
its so close, 1 more month
finally eu-brug :D
did you read
NAH I SHOULD HAVE BROUGHT IT WHEN I WENT BACK HK TO SEE MY FAM 😭😭😭
and white cases got delayed 😄
It's American boats yeah your own your own i ain't trying to get nuked

we will survive 🙏
At least it’s not North Korea
FINALLY ITS HAPPENING BOYSSSSSSSSSSSSSSSSSS
okay so with the 10 day delay and the US fulfilment we can expect our keyboards by 1st quarter 2025
When is the eu brug
i regret
let's gooooo
BATCH 2 TIME TO SHINE
Alright WHOEVER IS EU LETS ALL WAIT TILL HALLOWEEN
W batch update 😩
Thank god I was poor and brought a frost case
This estimate assumes slower-than-usual logistics. Once we confirm the freight booking, we'll see if we need that extra time or not. With some luck, shipments might start a few days earlier. Stay tuned for updates!
What I get for being in the hamburger country
hmm, cool
W
Shit hasn’t updated since Oct 8
When is the eu brug
never
Lol
2025 Q3
No date but address confirmation at 31st October
Ikr!
Get hyped boi
Ok thanks
Just a little more patience…
2 weeks is nothing
Hong Kong uses Cantonese so loads of Hong Kong people would really appreciate it if the batch name is in Cantonese instead of Mandarin 
Exactly
Finally you got it, have fun with it
Me when I speak Cantonese but ordered EU brug:
Except the White Zinc keyboards and cases...
Later this week, more information will be shared about the status of these orders. If your order contains a white zinc case and you choose to ship it as-is (via the Wooting Hub), it will be ready to ship to you about 2-3 weeks after the dates provided below. Later this week, more details will be shared directly to affected customers via email.

what does this even mean
The white zinc case is beautiful 🙂 I have no regrets about buying it or typing on it right now
so white zinc keyboard orders just have to wait even more??
yeah I am curious about that too the address is in Hong Kong
I mean... Too bad? We ship from there, most customers for the HK warehouse are from mainland China.
It's not like most people using the Dutch warehouse are Dutch either.
What does the white zinc case thing mean?
Flexxx
Hong Kong warehouse does not stock most products, so any orders it can't ship come from NL instead
Basically they had problems with it before on the first batch
You either confirm you want the v1 case or you wait for information about the v2 🙂
do u like water
White zinc case can have as many issues as it wants I have no regrets choosing it
The production got delayed
however the batch name is called Brug which is Dutch, it's just some minor thing though
While they worked on a v2 white zinc case to solve these issues
Yeah I know but some people chose to stick with the v1 case
aha so this only applys for ppl want to wait for the white zinc v2?
Like I said...
only reason i didn't like white zinc is b/c it scratches / marks easily
yea but if ive already chosen to stick with v1 does my order ship on the estimated date still
I am wondering who in HK even ordered wooting cuz I swear all they do is go to their local Logitech store and buy shit there
If I chose to stick to v1 white zinc it's still delayed?
Mis information.. it doesnt scratch easily the paint chips away
yeah I guess this meant for ppl how wanna v2
That’s what I see at least
Like the update says, your order will be ready to ship in 2-3 weeks
31 st October Arrived at the warehouse?
so even worse
Last report being October 8th is crazy
Prob
Let’s just pray 🙏🙏
The paint doesnt chip away easily it just happens during shipping somehow so they need to change it
the only thing i wonder is why my shipment to asia but it has to come from EU fulfilment center instead of the HK ones.
oh 2-3 weeks from now or after 31 oct?
where my white zinc gang at? group hug please!
sorry if im being kindof annoying but i didnt really understand the zinc case thing on the batch update xd
White zinc gang gotta wait more! My fav hobby lately.
Where u live
Wait two weeks and see what happens. Just watching the League of Legends World Championship to delay time
calling me out but it legit says scratched easily #📦│batch_updates message
we all don't understand not just you
Bali indonesia
Only ships to China, KR, JP and TW i think, and it doesn't stock much.
ah okay noted, was just wondering cause it wouldve been cheaper for me to have it sent from HK
Got the keyboard here is a quick soundtest
the wooting is older than bro 😭
Man so what I dont care about this information I ordered the plastic case ofc I skimmed through the zinc case part of it 😭
Real
Yeah, make them start young a say, he will pwn n00bs in no time
IF I ORDERED WHEN I WAS IN HOLIDAY. 😭😭😭
And we could just upgrade the plastic case later on
I think it’s mainly China Taiwan hk and Japan
Tbh idk at this rate
After I guess
now Mark meant zinc white v2 or v1 ?
damn
gotf my 80HEE anyonee wanna watch a unboxing
prolly v2
I really would but I'm busy now 😭
ok ok ty :)
Yes yes yes yes yes
he need to till us which one
im in thee voice chat
eu brug air transport ?
I'm missing out
yes
Mine came in perfect and has had no scratches or chips since owning it if that makes you feel better 😂
yeah
Join ltr hold up
Wow
v1 is getting the delay
First impressions: Coming from a mech key and tactile switches, this thing is sensitive AF!!!
ahahah yeah im glad :D
It's ironic that even when Mark posts a batch update, people don't read it and keep asking questions it specifically answers
It's not ironic if that's the expected result 
So... update when ?
only update no read
But mate, it sound and feel super nice!

It doesnt get scratched tho???? This was pinned for a reason
just saw batch updates... common white zinc buyer L 
...but whens the next update going to be?

clear it for us are you talking about the v2 in?
Scratches at level 6 and deeper grooves at a level 7
not enough fr fr no cap bussin in the update for average zoomer to grasp
Can we have an update about the update ?
assume 31rst oct if burg
Tbh I dont even know anymore
people before it: where's the batch update
People after it: Uhh basically idc so can i ask when my 80he coming
"Ship as is" refers to v1 exclusively
aha ty
If you don't behave, I will run the entire batch update through TikTok's AI voice tool and add subway surfers going in reverse
I ordered on the 12th and couldn't have asked to order at a better time
rot brain
fr
I ordered mine in july 
I got told Anders is 🤏 this close to run over the whole batch with a bulldozer and call it "delayed".
I needed to lose my impulse control so I could buy the wooting
this just means we getting it on time
(for v1 mfs)
Anyone else's board have these 2 micro scratches on the inside of the led bar
from what i heard from: just try clean it or sth
yes @tight swallow
oh....
try email?
Would case issue be considered low or high priority 🤔
Prolly mid lol
i got my keycaps
Show
I wanna do that

Does it matter that much 😭
Why would I
i have a guess
starting em young
alr sent it
Theyre cool
ty
Everytime it gets close to December I no longer have impulse control 
Is there no other way reaching wooting support than via their support requests? Been waiting almost 3 weeks with broken 80HE sitting in a box.
nah
but it took me 3 weeks to get reply
so yours might get a reply soon
Hope so
whyyy
5th 21th
Is it atleast good news when they reply? 
yeah
wut
So good customer support just takes a while?
I mean they are just backlogged like crazy
we got some people on here sending 5 support requests
Yeah makes sense
cause they are not aware that its backlogged
and they think their ticket is lost lol
I hope customs goes smoothly so I can get my Wooting 80he early 
does the EU-Brug batch fall under NL fall under the NL fulfillment?
ye
bet
Real
I think they will
My keyboard freezes up on me from time to time randomly. Who else?
I would comment if I had one
I hope so 
Waiting for 3 weeks, looking forward to it, hoping it won't be delayed
LOL, all us waiting for are Wootings, as if we are waiting for our luggage at the airport 
Can i pay extra to get my wooting faster
yes paypal me
I am slowly regretting choosing the white zinc alloy case…
apparently its 100k and Calder will hand deliver
slowly?
*150k
hand deliver within 48 hours in a road accessable area
maybe a nice selfie too
150k should at least cover the pack mule required for buyers in remote areas


