#🌟│wooting80he
1 messages · Page 216 of 1
Na bridge is already on its way to their factory
And throwing money at it helps how exactly?
It´s definitely not "my" fault when they are delayed, so dont come at me
no ones fault on here either
They delayed it to December but now it got brought back to November
We'll continuing making the keyboards as quickly and efficiently as possible, and keep selling on a first come first serve basis
so does that mean I should order now in case I might get served soon
guess ill just have to stick with the big yank - hopefully i wont need the old ones anyways
idk your production line specifics so its hard to say, and I believe you guys try as fast as possible
Next batch is next year in January
yeah Im not here anymore then
I wouldn’t bet on it coming any earlier
yeah - not the biggets issiue ig
north/south clips don't actually move away when you grab the switch from the top, yes
you're better off helping them out from behind/bottom
finding just wiggeling them with the switch puller and pushing from behind is most effective
some of the latches gets damaged but not broken - cant get them out any other way
btw, 60he has it way easier, ye it's still secured well, but you don't have to go full gorilla mode on it lol
forgot to mention that it's with the same switches so definitely some tolerance difference about the plates*
im so excited for this keyboard :)
@nova nexus is there any official updates on the other batches?
uhm yes, its the industry
you are behind
I heard that you can rotate the switches on a wooting to make it have south facing rgb. How does that work?
Does it have south facing leds?
What you can (but don't need to) is flip the north facing switches south facing. This means almost no LED light (cause you're blocking the LED with the switch now).
This helps you install some KEYCAPS that don't work with north facing - but it's been a year or two since we fixed that with all of our switches.
So if I put on non shine through keycaps there will be no interference
when will EU-Walvis start production?
Tomorrow

24 hours? but it's only 3 min past midnight for for me
That's the beauty of tomorrow, isn't it?
It's never today
I have a batch update ready to post during regular business hours CEST Monday the 14th of October
POG
29 seconds · Clipped by Mansen · Original video "SPACEBALLS (1987) | We're in "Now" Now | MGM" by Amazon MGM Studios
What about na Bridge?
They are the same
Ok
LETSGO
copium
Does anyone knows is there a inverted version of pbtfans crosshair or something close to that
d
Same here. I was really hoping that ordering it early would make sure it would get here by Christmas, I guess not.
but i feel like you play Esports games like Valorant or smthg right :D?
Awesome, thank u!
????
What's your ETA
I ordered mine at 12:00 yesterday and can expect mine from Nov17th to December 1st
I look forward to it
Thank you Mr Spookbar
I ordered my 80he yesterday if i'm lucky enough to be apart of batch #2 i'll jump for joy
I think it should already say what batch you are part of
mine said it was a preorder but its arriving wednesday
i bought it over weekend, so happy
W
guess i got lucky with timing based on the messages sent in here
friday i think
does this mean yall bought it a while ago and just send now? im confused
yeah ranges from April lol
an 80he?
i also got the 2he full sized
I bought mine on august
idk if thats different from 80he
yeah it is
ah
that's why xd
i like full keyboards i dont like the % ones
will it really make that big of a difference?
8k polling rate isn't gamechanging though
It's moreso like a more fleshed out wooting 60he
No, unless you are some kind of super robot
So choose it regarding layout, performance wise there is no noticeable difference
seems pretty similar
i like full so i bought the 2he, didnt look like any of the others were full
just making sure im not missing out on anything, ty for info
Not missing too much
upgrading from stock keyboard that came with my pc sooo im happy regardless i think
I just bought the most recent so it was future proof
my old laptop kb had .3mm so im happy to have something i can adjust to that
feels like it takes an eternity to click buttons on this kb
Enjoy your wooting! (Once it arrived)
Mine should arrive this week
80he?
Yes
Take photos for the chat 👀
I will, for sure
You planning to mod it?
Probably tape mod, and geon raw he switches
What's a tape mod?
oh you got the two he?
🧐
not the 80he?
Adding painters tape at the back of the pcb
Does it make it sound thicker?
2he
thats why lol
That affect sound, have you watched Wooting's youtube video about the tape mod on the 80HE
The tape mod is an easy and affordable upgrade you can apply to your Wooting 80HE. While we've already pre-installed a PET film on the back that functions similarly to a tape mod, adding three layers of painter's tape still made a noticeable change, particularly with the Zinc Alloy case. To help you decide if it's right for you, we've included a...
Oh nice
What are the odds someone dares to put the stock pet film and tape together
I wonder if it would sound better with both lol
It prob will
ANYONE WITH A 80HE VOLUNTEER?
250hz to 8khz is significant tho
(Two HE)
According to the table above Two HE is 1k
It's only 1k on part of the keyboard if you run the rest of the board at 250hz
Enough then
officially changed to white zinc case
LETS GO!
I don’t have the money for it 💀
Right on time before batch 2 announcement
These CS reps working on weekends? 💀
Mark said it full-time
I was being cheap initially then when I saw everyone post pics on here I had to have it
dang 
Lmao, that's how they get 'cha
I blame them
Fomo hit hard
I can just buy the case in the future, for what you get it seems worth
fr
I have like 100+ pounds now am screwed if I buy it
my current keyboard is some sort of metal so going to plastic wouldnt feel that great for me tbh
Fair
Finally BATCH 2 updateeeeee
LFG hype

NOVEMBER PEOPLE OUR WAITING IS ALMOST OVER
It’s September 20th for us now 
Welcome to 2024
Fuckin from the tight rope brother 🤣🤣
Lmaoooo
Definitely not ideal, unless you’re in a group buy/preorder it takes forever, but if you don’t then it goes brrrrrr
I think he means in general
I mean... it's not too bad. Helps with figuring out what to become since idk what to do after HS yet
Hs?
highschool
?
???
You have the pc plate out? Don't bother with a switch puller then. Use your thumbs and push the switch out.
I popped them all out in like 1 min doing that
hey super dirty how far along are you with the lubing now
I juste Order the 80he how long this can take ?
probably gonna be early '25
The checkout tried to tell you.
The hub has the most up to date estimate, but as asdf said it will most likely be Jan 2025
Been done since yesterday but I've been busy so i haven't bothered putting it back together yet
@tribal anvil

Yeah i just see it so I get it in december
LMAO
ohh nice, did you do tape mod or something too?
Gonna use polyfil
Is it supposed to sound like that
The cracking noise? It's just the switch being pushed out. Zero damage to anything
very nice, curious how that will sound
Ah gotcha. Was gonna say that didn’t sound nice 🤣
you've damaged your honor heretic
You can damage the housing clips by pushing them out like that.
Not one got damaged
You CAN
I mean even with a puller you potentially can 🤷♂️
It's a lot safer, when you're using the right tool for the job in the intended way.
And more importantly covered by warranty 😄
The biggest risk using my way is cracking the PC
You can ignore the warnings - That is your right. I still have to warn you though.
Fair enough
my god the horror
bro cracking it like its walnuts 
tbh even the stock switch puller doesn't compress the clips that much so you end up slightly rounding over the north/south clips no matter what
bro ought to be a bit more careful about the plate though, looks risky 
Yeah that looks bit scary. I mean, you can, but that probably wears out the small hooks that are supposed to catch onto the plate when you dont at all use puller to push them in a little. But eh. Each to their own.
Taking forever
wdym taking forever
Mine says mid january
Ridicilous like
3 months??
Based on what people have been sharinng here about switches being hard to pull out, is this something that particularly the people who bought keyboards that were "switch injected" at the factory? I remember watching one video where the boards had the switches being placed by a machine
I wonder if those are the ones that are TOO tightly pushed
you can't really push them in too hard, they're either in properly or not
I mean no matter how hard you push down switch, it's not going to be any tighter. Unless the whole itself is super tight for the switch size. It's the small plastic notches there that hook at the bottom edge of the plate to kind of prevent it from pushing up from the plate.
Na the lekkers just have tighter tolerances making them more difficult then other switches to pull out
But I probably would not even use the plasting pullers. I haven't yet ever found one that is robust enough for me to trust.
Does that mean the the Lekkers are a bit "intolerant"? 😉
yes
You pre-ordered a product. Have been given an accurate estimated time and are complaining? 
Here's my jades vs lekker v2s on my 60he with custom PP plate
@rose bolt did yours already changed delivery status? Or still in transit
Still in transit mate, how about you?
Size might be super tight, or is it the legs that get real tight in there?
my guess is that early/all plates are a bit on a tight side
installing/removing lekkers v2 from my 80he and 60he are two different stories, 60he with metal plate is what i would call reasonable fit for removal while 80he is hella tight
cooked
Same, it says departure from the international sorting center since 2 days ago
Yep, we probably get an update tomorrow
Ye
Holy moly, I got tense just from watching
You are in Spain right?
geon raws also tight fit in 80he, but much easier to remove from 60he
Correct
So you probably get your earlier than me
That’s been my wait time so far ordering end of July for Batch 2. Batch 1/founders waited double that so it’s not the worst wait, but if you’re comparing a pre order to an in stock item it’s a long wait
my geon raws came
Unless they went two different routes
Not so sure, I guess we will have it around the same time
(I only got 80, missing 4 switches 🥲)
I'm curious about the geon raw, but more importantly than new switches, I'm still looking for decent keycaps in iso-pt
Super difficult to find, I'm thinking I should have go for the ANSI and stop using the ISO-PT
But could not change that anymore when the order was ready

Just use ANSI and get all the best keycap options 
geons are nice, i'd give stock switches a try first though
I'm going to put both at first just to compare them
Yep, I'm thinking about that as well
maybe 50% of the keyboard each just to see
you also got Geon Raw?
Ye, already got them waiting for the 80he
Nice!!!
I bought them when they put the discount code
little did I know that customs were a f robbery lol
Geon raw he on 80he zinc
Sounds delicious 🤤
considering of lubing but too lazy to remove again, next time 
Same but in plastic case
sounds really good
@weary knot @fallen forge any mods on those?
sound and looks
Been considering of getting plastic case actually
nah just geon raws + neon r2 abs keycaps
i am still wondering how well that caps takes shine tho
ghost best case, zinc raw close second 
Been thinking of frost or ghost, will probably get frost for the different color cable too 
dark in here, but you get the idea
did you lube the space bar stab
nah they were fine out of the box
hows the ghost look with rgb
40 or 50?
Sounds nice i ordered the geon raws too im probably gonna tape mod it aswell
60
I noticed that when i modded my sayo from 60 to 40 my bpm increased by 40bpm no joke
There’s just a lot of accidental pressed that messes me up
Only complaint I got ab geon raw is 3.4mm, actually prefer 4mm a lot more now that I’m using it
I'm thinking about getting a wooting80he and I can't really find a reference to when it would actually get to me if I were to order on the website it says it's at the warehouse at September 30th but I don't know how to tell when it would get to me
when you input your address
in checkout
shortening the switch travel is a dealbreaker for me
where can i find more information about the cs2 rapid challenge thing? what are the prizes and stuff
It says 5-12 days do you think theyll be able to do that? I assumed that they'd be quite backed up
Im in eu-wavis batch which if you order now youll get into and it says eary january order status
It says pre order so I thought It would take longer than that
I gess yea jhst eanted to lrovide some reference tbst its actually a. It longer like mont to teo months

Copium maximus
I guess yeah, I just wanted to provide some reference that it's actually alot longer, like a month to two months.
Yea thats what i said hahahaha
Did I get it correct? 
Look you will def get it before end of 2025
If you want it just order it whenever it arrives it areives
I was a little salty that they didn't have a cheaper aluminum case option for an in-between the plastic and zinc but the ghost color is just 😩 so it makes up for it
I'm team ghost aswell bc ghost is just 😩
Good it means ghost color good
no
thats the delivery duration
look at the estimated date when delivered
Is this right?

Do the estimated delivery is close to the reel delivery ?
his estimate waiting time is negative 8 days to negative 1 day
Looks to be delayed - you should check the tracking
just place the order, it should update
Wooting 80he
it is probably december/january
unless they are from NA where there are still some extra keebs
I'm okay with this bc somethings clearly wrong with mine 
the us warehouse is in vegas right?
unless your taking the japanese layout i think

yes
All default except for ghost coloring
which case do you have btw?
zynk black
im in vegas 😎 les go
nais
let me know how long it takes for you to get it delivered 
Don't worry guys I'll keep you updated if it arrives in -8 days or not
yea i ordered in july 7th and i cant wait any longer
oh dang
hope we get it sooner 
It came -8 days ago like the shipping said and I accidently broke it so now I don't have it in the present 😔
Chat is it just me or am staying up just for this batch update
HOLY SHIT LETS GOOOO
Ye prob
no
😔
sad to break it to u its been that since sat
Welp who cares that who notices first AM HYPED RN WOO
Maybe that's why my estimated delivery is being wonkey 💀
yeah havent looked into it this weekend
There will be a batch update tomorrow 
thats nice im hyped

wdym
oh october
theyll deliver it to ur past self
xd
It's been ordered am I apart of the cool kids now?
you are now in the wooting cult
🗣️🔥💯💯💯
I've got three first born children at the ready
I haven’t done the ritual yet
But I am in a cult already
Dw you can have one of my first borns i have a couple extra anyway
okay so mass production is done which also means QC passed because its already being shipped to the warehouse?

Mines so fast there utilizing time travel
Even with the warehouse deliveries
Pls man
I hope
They redirected me here W server you got here BTW I'm liking the wooting cul- I mean family
Dw once you get brainwa- I mean chat with people and have fun you won’t regret joining the cul- uhh I mean community


these actuation point settings be getting out of hand ceiling fan pressed my mode key lmao
Ye ye that’s not real mhm- uhhhh
any eu-brug updates? 👀
Glory to geon and all that he touches
tomorrow brev
/monday
🙏 preciate u gang
Glory to Geon and all that he touches
Time to compare
At first I thought you already painted the 80HE case but then I saw it better
So you are deep down into the rabbit hole
Not much to compare the akko board only does 8k on 4 keys with 125hz on the others
Are the keycaps in your 80HE shine through or are those legends like that?
do u guys know what you can do with the he+? i got one and it arrives in 4 days but im js wondering if theres anything cool
Razer death adder v3 pro wooting 80he akko he keyboard and an audio amp and what i can only assume to be a specific mousepad of better specs for your mouse you sir must really love periphals
Also ltt mousepad
But we don't give free advertisement 
Looks like the location of the ship doesnt been updated for 6 days
The ship with mine has a flux capacitor
If i pay 10 dollars i have the exact location of the ship, should i do it?
bro
come on 
Idk, im impacient
dont do it 😂
Alr
What
😭
the mouspad is very specific, that one doesnt give me skin rash
it feels good too
Indeed much better specs 
i have to aactualy play a long session with it to tell
the LTT one looks good
thats why i use it loli dont have their logo out
No free advertisement 
Sound test of them on 80he if have?
For those that have received their keyboards, is anyone having any issues with sticky keys? I have reach out to support on this but have not heard back yet. My space bar and shift key stick when they get to the bottom of the range.
too much effort swapping switches
imma just try them as is
no issue with mine so far

hmm good to know...I may just have to go through waranty then. Only a couple keys but I have seen a couple others report the same. Just wondering how wide spread and if i can fix it myself
sticky as in physically stuck?
if it's just space and shift maybe the stabilizers are overlubed
Yes, they physically stick if they are pressed all the way down at the bottom of the range for a couple seconds
or not overlubed, but certainly sounds like something to do with the stabilizers
Yeah I think overlubbed. someone said they were able to put a bandaid in it or something and it fixed it since it has something to do with the white pads? lol i am very new to keybaords so not totally sure
i saw someone mention that ye, about the pad being/becoming? sticky and they just replaced it with bandaid
either way that would require removing the stabilizers which requires opening up the keyboard
Hmmm. Ok. I'm hoping support can give me an elegant solution or point me somewhere so I can fix it
were cooked
💀
its not the 80he
nor is it new york
It ships from West coast to East, it wouldn't ship automatically to the scenic East coast route
Rotterdam is a city in NY
Rotterdam is also a city in the Netherlands
I’m American
its NL
Right
Ik they’re Dutch
hows ny tho?
wanna go there to see the streetwear ngl
they are always shipping NL before US so if US is ready on the 22nd I guess its the same for EU bc of longer shipping
NA also gets a different shipping method from EU (US gets sea freight and EU gets air)
I love NY
There’s very little to do in some parts
But a bunch of content in other parts
If you’re a tourist there’s no doubt you’ll find stuff
I’d rather go to Florida though
i want to be alive
ohh thats logic 
LOL
Ok it changed its no longer in the past
it's going to be here nov 15-22
That's an estimation though so let's say December 15th
I ordered early july
july 13 to be specific
dont jinx it buddy.
NO LMAO
Ima go knock on 5 different pieces of wood
I wishhhh
Wait so you’ve been waiting for batch 2 this entire time
I have the same order date as you
Sick
17-1
My order happend an hour ago but mass production and shipping has already started so I'm praying I won't have to wait a year
i still dont get how ur batch 2
sameeee
wasnt there people batch 3 already
I guess someone canceled as he ordered
heard there will be an update tomorrow so I hope the estimate will update to something more accurate
this is ghost
iirc it doesnt work like that
than its soooo random
wait how do you see this page
Check your order status, or see the status of current and planned batches.
thanks
I'm on NA-bridge is that good?
yes
yes
Yay
it makes no sense since bridge is out of stock 
Well they were saying na champion earlier but then it changed to bridge on the not yet ordered part so I'm assuming it's bridge
Idk why I get access to time travel and out of stock items but ggs ig 
prebuilt pcr black is the only one not out of stock for bridge.. I'm surprised. like really surprised
I still can't belive wooting sells there coiled usb c cables for 50 bucks keychron sells there's for 15 bucks so I just yoink one from them
Yeah i saw this but I do not want to put band aids on my $200 keyboard to fix something that should not exist from the factory
Well Wootings cables are rated to work with 8K and Tachyon mode but if that's not important to you then it's up to you
its not really that far off compared to cables from Glorious or Cablemod Pro
I did idk what's going on anymore lmao
you can check to make sure at hub.wooting.io
oh they do? i should have looked at that lol. probably better than my aliexpress one that is on the way..
Wootings is usb c 3.2 will any usb 3.2 or better cable not work the same?
frost case looks amazing but I feel like it'd be distracting XD
they look real nice for 13$
Doesn't really matter with the speed it's more the power delivery that becomes a problem the cable from coiled kit is usb 2.0
Any Usb c can deliver more power then usb 2.0 tho
The usb 2.0 included with wootings seems to be an adapter or i could be wrong?
Yeah , the OP mentioned you can use other material instead of bandaid. I doubt support have other solutions, because pretty sure the lube leak causing the sticky space bar
Looks to be just a usb c to usb
feels a bit ridiculous to be an early adopter and then have this issue resolved in later batches. I would prefer to just get a keyboard that doesnt have this problem
I wonder if I’ll get my delivery sooner than the estimate if the NA-Batch arrives soon
Yeah I know I'm just confused on how horrorbus means that the wooting coiled cable is designed for 8k polling rate
Idk much about keyboards so I just assume that aslong as it's same or better usb c gen then it would be fine
well it isn't its designed for low latency, and for aesthetic
it just happens to work well with 8khz
just dont think the price tag on that cable is warranted and looking forward to trying it with cheaper ones, we'll see how that goes
Yeah because of the usb 3.2 so I don't see how that would be any better than keychrons coiled usb c cable
I don’t understand ANYTHING about this conversation
Not all cables are built equally
usb c cables vary in data transfer speeds too
which is why VR usbc to usbc cables are expensive too
Is it normal for 80he zinc to be warped
some devices need those data transfer rates to function properly
It's fine with 2 of the feet but not stock feet
I wouldn't worry about the type of usb 2.0 had more then enough transfer speeds for a keyboard
Cable enters pc + keyboard and it should do input
Yes based on there generation and length data speeds will typically vary but the keychron cable and the wooting cable have the same usb generation and same length so I don't see how the wooting is better
It's the power that becomes the issue
I don't care for usb 2.0 what I'm saying is that I don't see any differences between wootings 50$ cable and keychrons 15$ cable
it's not about 'which is better' it's about quality and reliability
I'm telling you the difference you're just not listening power delivery is the difference
Keychrons just as good of a brand as wooting so they have the simmilar quality and reliability typically
you're just making a pointless argument if you've already made up your mind
And they both support power delivery
Yes but not at equal levels
just get the keychron if it's in your price range
The keychron cables are designed for standard mx boards HE keyboards use a significant amount more power then a traditional mx keyboard
no, check with multple surfaces then contact support
Usually yes at equal levels because typically that's decided by the generations
Yeah it sucks, I understand ur frustration. I hope batch 2 doesn’t have this problem (I’m in batch 2
Ima try to find more detailed specs for both cords bc this is confusing me
It's not usb is a mess
It is usb, usb c is a generation of usb which sprouted off thunderbolt which was designed by apple and Intel
And yes usb is a mess but spec sheets help with that thus I'm going to delve deeper
?
Some cables don't support data transfer some don't support pd etc
That's just manufactures being dumb
You can not believe me if you want I'm just saying your keychron cable is most likely not going to work with tachyon and brightness at full power 
Do you have the specs of the wooting coiled cable?
Bc they don't provide very much on the website is confusion
dude just drop it we dont know nothin about cables 😭
bruh
I can't find any specific specs on the cables of the two so once I get the keyboard and cable I'll give report
I found the live location for free lol
That's enough cable talk lol
yeah
share link 
What else do you want
MarineTraffic Live Ships Map. Discover information and vessel positions for vessels around the world. Search the MarineTraffic ships database of more than 550000 active and decommissioned vessels. Search for popular ships globally. Find locations of ports and ships using the near Real Time ships map. View vessel details and ship photos.
Does keychron?
Nope thus why i was going off usb c generation and length lmao bc that's basically all they gave us on both sites
Thats the link
You just need to search the name od the ship (cma cgm ohio)
Well I'm just letting you know how it is 
5V 850mA for 80HE PD
I assume it all depends on the version
Is there something wrong with the stock wooting cable?
Yup that's why i was saying it depends on the version earlier lol
Nope stock cable supports the full features of the keyboard
Although some can be dumb and have stuff like no data transfer but that usually is somewhere in the description even if buried
So why is he complaining
😭
just checking for a 3rd party coiled cable
I'm complaining about the 50$ price tag on a usb 3.2 coiled cable lol
keychron also does HE, its probably fine
Even within the same usb spec if the cable isn't shielded as well or too long it's not going to be able to deliver the same power as one that is
if anything im interested to see how it goes
their HE boards contain batteries afaik and are slower to compensate
i own a Q1 HE as my first HE board
Does his 3rd party option have to be keychron? There’s plenty of brands that make cables for less than 50
It's keychron I really doubt they'd skimp out on smthn like that
saw this too, not sure if a whole lot changed in that regard but eh, id like to see some people try
all of keychron's HE boards are wireless and have an internal power supply (aka battery) so the USB doesn't need to be super great
Probably, I bought a 50 euro usb c cable before and its the best cable I have, its 5 meters tho
Well given it's price they probably did
i believe their cable is the same as their other mech cables so nothing too special
its like 30 bucks just for that
Again it's probably fine for what keychron does which is mx keyboards for the most part but HE keyboards are different
No given that price they prolly cheaped out on the braiding and connector
seems so
they likely did on both
im looking at it and it isnt great
Still i don't really see the point in investing in better braiding and connector
Maybe lifespan
the one im eyeing rn is like 200 bucks
They've got some fancy options of there own there premium line up of aviator connector with 36$ options would probably be a more fair comparison against the wooting cable
Also just a more premium feeling cable, people like that
nah
thats the same stuff
just painted
Maybe either way I'm not paying more than 20$ for a cable that's not better internally then what i can get at that price point
but I do know there's some who love a good cable so more power to them
wooting's
Life span is most likely increased aswell not much but there is an increase
I mean internally the stock is pretty much the same as the coiled
Yeah
i like the wooting cable kits
But keychrons is most likely not as good for power delivery
OH SHIT
likely not yeah
WIREDIN DROPPED FAST CHARGING CABLES
I still don't see your point there because they're both the same usb gen and pd is delivered by usb gen
https://wiredinstore.com/collections/charging-cables/charging-cable ehh aesthics wise not his best
if you ran the keyboard in wired with vs without batteries it would LIKELY harm performance
ill wait when he does something nicer
Idk how many times I can explain it not all usb cables are made equally depending on the quality internally the power delivery can vary wildly between cables
Even within the same usb spec
safe to just main a wooting cable tbh
Not wild enough to have not enough pd to power a keyboard
Just make your own cable ez
real
I'm not saying it won't power the keyboard it just won't support tachyon and full brightness rgb
I get that yes it takes more power than the ones before it but it's still only 5v 950Mah
lowkey would be hella cool to learn how to design cables and make them yourself
wired in sells parts
#when diamond encrusted cable drop?
or you can design one prebuilt
Let’s roleplay cable-making by tying our shoes
I'll test it when I get a keyboard and if it doesn't work then you'll be right and I'll probably not care very much since I actually don't use rgb in my setup lol
what is this?
Still would be an interesting test for sure tho
cable
well duh, why does it cost so much
I can pretty much guarantee it won't I have much more expensive cables which also do not support full brightness rgb with tachyon
Good cable
I see
very good cable
doesnt this seem overkill? XD
also family business
That's weird because if I'm not looking for a coiled cable and just a normal quality cable it probably wouldn't be as hard to find one that could support it with ease
If it was a bad cable it would’ve been cablen’t
Does power get limited by the weird large barrel connector the cable has?
Probably depends on what you need it for i guess
I take my cables to the gym so they can get stronger
Don't let theifs know about the price of these cables 

Longer the cable the harder it is to get the full power out of the spec, coiled cables tend to be pretty long
wait till they know the prices of keycaps
They’d probably take the whole keyboard anyway

thats why we need a tungstun case @wooting
I want a case with holes so I can attach em to my desk
Nvm, ill just use glue
Guys what does wooting80he taste like?
Depends on the case
There’s the fulfillment center worker responsible for all the missing lekkers
#shame
this is such a cursed frame
132 dollar cable 
Wooo order is headed to warehouse!
what tf is this lmaooooo
how much better is 80 he from 60
Does this mean i gotta download the windows version even tho the web is consdiered "recommended"
20 he
funny boy
It's a feature that doesn't exist yet but is coming
I see a lot of issue with the 80he do you know if a lot of keyboard have issue or its just a low %
There are a few issues but it's the not the normal experience. 20k people just received their 80HE so an uptick in issues is probably because of that
Okay Thx
Although if there are any issues with your board Wooting will do their best to send replacement parts/units depending on the issue
Yeah they seem to care about the stuff they sell.
mfw when it still ends up in the states anyway 
You can get LEMO cable for cheaper
That is FLEMO connector - not that it matters but shouldn’t be paying that much for it
Can also build your own too - but that’s like diving into another side of this hobby haha
Funnily I know how long it takes to get to my place from that UPS warehouse 
wanna pick it up and bring it to canada by tomorrow :)
I'm also looking at cables but why are they so expensive???
its not just the connector
also idm paying a premium for a community i like
LEMO tax - well its because the connector itself is used in medical industry and cable quality is really good
I see
Is it cheaper to build your own lemo via wired in? I mean you are over paying for flemo
I can get almost similar build without cerakote for almost same price
hi
sound check
hi you
Gotta redo the spacebar stabilizer. It's sticking a bit
What’s polyfill
and own 1000 80he's
Am launching nukes for this
putting a pillow in ur keyboard
vruh
is ther ANY way i can use multiple prepaid cards
i have 200 bucks on one and like 20 on another
I dont think so
might have to contact wooting to send multiple payment invoices i guess
if they allow that ofc
In this case like foam mod or some shit?
that is so annoying man
fluff
if only taxes didnt exist...
these stuff
Oh
paypal can do that but paypal isnt listed for some reason
Ok guys problem
yeah cause of fees I think
paypal is scam
I forgot where’s my box of geon raw he
should i email support or something
yeah but it will take 3 weeks for reply
just a headsup lol
not worth it just try to transfer the money from one card to another
the cards dont allow transfer
Yikes
theyre prepaid
ask someone to give their card for 200 and you give em your prepaid cards
someone you know obv
no shot anybody in my life trusts me that much
man
GUYS AM SCREWED AHHHH
I took it

Damn this shit kinda ass
Nah srs
why
I swear if I have to buy another 90 switches cuz I can’t find some damn switches
maybe but like I told you.. they will get to you in 3 weeks
I’d much rather prefer 4mm, just my preference
Lemme guess ali?
4mm too long
4mm good only for piano
That’s what she said (sorry had to)
With such a short distance to stream and without bottoming out every time it’s very limited
is anyone else's 80he shift keys really loud and clacky sounding when you release it? If I hold down shift and release it quickly, there's a loud harsh sound. It happens on both right and left shift keys. doesn't happen on normal letter keys
aha that's why you prefer 4mm
I gave it back ofc
Mhm
We are unable to support PayPal due to their unfavorable business practices that impact our operations. We strive to provide the best possible service to our cu
ah well
It was like 6 pounds more for me
But then the packaging was so bad so I just brought it off divinikey at the end
how many days need to get email reply about the package damaged issue? its been 5days
took me 3 weeks to get reply brev
probably not
if not them im just getting the module and keycaps
and buying the switches elsewhere
Gn people
What about case
There’s no third party cases yet
does anybody's left shift key on their 80he stick? About half the time when I press the shift key down it sticks to the keyboard briefly before shooting back upwards
Sounds like either too much lube, warped keycaps or misaligned stab
I tried a keycap from my 60he and it does it with that too
I also tried swapping out switches and it still does it
I think it has to do with the plastic pieces to the right and left of the switch
i can eget it to 185 with the module, case, and keycap, and tax will bring it close to 200
for switches it does seem like geon raws are recommened
What is this? 💀
A scam
resellers
wootings site is blocked inn china isnt it though
Ah ye I thought you forgot about case 
though the lekkers are half off when purchased with the module...
Someone bought one lol
RIP man. That sucks
Swapping switches won’t do anything if it’s the stabilizers
anyone know why theres a bit of a creak when u press down on the keyboard
You mean the gasket?
So my lekkers switches came damaged with the 80he and I put in a support ticket already but it's been 4 days already, is that normal in terms of wait time for a reply?
Yeah they’re swamped right now so replies take awhile
yeha
I mean there’s going to be some noise probably but we don’t really know what you mean by a creak without video
i think im going schizo cuz i dont hear it anymore
Use stem holder, lift up stabilizer stem and get a brush with a speck of 205g0 and relube/wipe the stem and inside of stem housing
how good quality are the wrist rest and travel case?
Your cart is packed 
Carrying case looks like it is made out of 1680D polyester - and has a cable holder and storage inside. It’s pretty good
I havent opened the wrist rest yey
what does 1680 polyester mean
Wrist rest is quite nice. It’s soft silicone - so if you like that style of wrist rest it’s good
denier rating
what that mean
Toughness of the material basically
TLDR - the travel case is very nice as far as travel cases go
aparently the weight of a single fiber/filament of 9000 meters
silk being 1 denier
idk though
so that means a 9km long strand of the polyester used int eh strap is 1.68 kg
did we ever ban that guy who popped his switches out like it was bubble wrap?
going into 4th week without any response from wooting. i am sad.
You can set it to 1k in the wootility
The keys like the spacebar sound a lot clackier bc of the phone audio. Ill be capturing it with a proper mic later on. But anyhow, it is HUGE improvement over stock in sound and especially feel.
the sound holy worth lubing and changing the stabs ty I need to pick knight stabs
and hand lube Geon Raw
No problem! Also, the key wobble is much improved with the RAWs vs lekkers
did the module come with the stock stabilisers?
the wobble in lekkers hard to notice?
I'm sensitive to it so i noticed it
If I have an issue with my case do I have to send back my module as well or just the case?
the case only
does anyone elses wooting just out of nowhere disconnect and be an able to use, it also when unuseable has all light on in a still postion
it's a usb power issue of some sort. Turn polling down to 1k in wootility if you have this issue right now
depending on the issue they might even just straight out send out a case and not worry about you sending it back
alright thanks
gateron or geon raw ??? what should i use
Geon Raws
geon raw for sure
Follow our lord and savior and he shall lead you to the holy land!
whats the diff? faster or ?
mainly sound and stem wobble
shorter distance less wobble sounds better
performance isnt really determined by the switches in HE keyboards
its more the pcb and software
Suppose 1 magnetic switch had 0.5mm actual point
And this one has 0.1 mm actuation point so will ot be improved? Or like how's raw he switchs different form magnetic switches performance wise like not sound or loooks ..
well the point of HE is that you can change the actuation points no matter what switches youre using (as long as they are HE and wooting compatible)
lets say you want 0.5mm actuation, you can do that on raws, jades, lekkers
etc
the only difference would be the bottom out distance
for example, geon raws have 3.4mm of travel and the lekkers have 4mm
in wootings software (as of now) you would use the actuation slider as 0-100% for geon raws and mm distance for lekkers
What's the lowest the wooting software will let you set the actuation points
you can use mm measurements for raws too but you have to scale it 3.4:4
or about 0.85:1
i believe for actuation its .1 and RT is .15 (im not on my pc so i cant verify this)
What makes Knight V2 stabs better than TX AP stabs (if they are better)?
knights are screw-ins but i believe tx aps also have a version for that
but it (tx ap) are known that at least for the 60he, theres issues fitting it onto the module
ok thank you, i was just wondering because i saw a youtuber recommending TX ap screw in stabs for the 80HE and he modded it and it sounded fine to me but i've never heard the knight v2 in comparison so i was wondering
people didnt have issues and some did, unfortunately i was one of those who had issues with it
the wires wouldnt go into the clipping area on the stabilizer housing
(which isnt even the issue i listed above)
so i had go return TX APs and buy SW Knight V2s
TX AP and Knight V2s are both solid options in terms of stab replacements
imo the clear plastic on Knights helped me because i could see how much lube i was putting on and made everything more consistent
as a first time builder/modded
it looks like theres dust under the light bar, is it fixable?
yes, youd need to take the top part of the case off and then remove the silicone led separator
Let the assembly begin
Yeah fed ex man came by
the long awaited sound test is almost here 
Oh the 80he wrist rest has a small slope on the end
I like it
Improvement over the former design
ive never used a wrist rest before, to those who games fps, does it help ?
yes for everything
The correct one of course
White? 

what’s the second case, plastic?
Yeah ghost case in case I wanted to do retro nintendo build
ah nice, i’m thinking about getting a ghost case as well
Yeah I have a few spare knight v2 stab packs
I didnt
the slope of the 60 is perfect for me
just fyi for people who like that form factor
I even use the wooting 60 wrist rest for another non wooting keyboard of different size
i have 3 plus the 80he one
it slopes just where I need it (as in it fall short for me personally)
have you done the keyboard inspector test in safe mode? usually, unless you have the highest end of pcs, the noise from the OS (background apps scheduling cpu away) is simply too much for an 8k peak to show up easily
Yo nice case choice but black is still king 👑
no i find it rather uncomfortable
tried playing with it but i just cant
Just for typing like work or everyday use. I can’t use it for gaming
I can't use any board without it super comfy and reach function keys easily so why not
test in safe mode pls, its difficult to get an 8k peak in usual conditions due to too much noise in your OS
Hi mat, is what sno|jed said accurate about keyboard inspector not supporting 80HE? I get readouts just fine from it except specifically at 8 khz toggled with tachyon off where it registers the keyboard at ~190 Hz. Can you confirm if this is true or not?
keyboard inspector does not "support" any specific keyboard
there is no need for that distinction in the software
usually getting accurate readouts past ~4khz is difficult solely due to noise in your OS
Isn't that the app that doesn't support 8khz right now?
Wooow good luck
safe mode remedies that super easily
... it has since late 2023
Then it is not that app 😄
There was one app people tried to use to test 8khz with here that didn't report 8khz correctly iirc.
pretty sure it's that app, it's just that getting a clean 8khz readout is really difficult PC hardware-wise
I have gotten 8k readings but only peak. I noticed you removed the peak verbiage in the latest version though. With wooting 80HE i see around 6500 Hz. My pc for reference is a 14900k and ddr 5 7200 mhz ram, minimal background apps
At any rate keep in mind that you have to enable 8khz in two places for both polling AND scanning.
Scanning is Tachyon, Polling is the 8khz toggle in settings.
Has there been any announcement about the white zinc v2?
wow @forest flume was being so real in this chat he just got promoted
lol
Have there been any other reported issues about the Enter key on the UK ISO keyboard. mine pops off frequently.
Using what keycaps?
Wooting PBT Keycaps
i checked your latest review peak on magger keyboard and the result you got is too noisy and means literally nothing, in that case the peak at text is extremely misleading and that's why it was removed, it was only confusing users in this situation. (in case of a clean read it's also pointless as you can just, read the obvious peak)
Any updates on the white cases so far?
You're sure the keycap is pushed down fully when installing it? It shouldn't be able to just pop off.
Yeah, I've had to do it multiple times. The stablizer is also really weird for this key, for other keys you can pull it up, and it stays up, but for this key it shots back down agressively.




