#đâwooting80he
1 messages ¡ Page 205 of 1
Yeah, probably a good idea. How long are you supposed to be gone for?
yee only like a week
hoping the delivery drivers wonât work during thanksgiving LOL
happy working day for wooting support who work on our tickets now give me an update pls
anyone know why my 80he led bar just doesnt work? its just full blank after i set it to light up when my caps lock is on
also the light is just not on no matter what
Have you opened your case up?
I had this issue last night, and my issue was the rubber LED piece was tipped over and actually blocking the lights.
dm
Facts lol
well fingers crossed the ups guy wasn't ace ventura with my wooting and it arrives this morning with switches are safe.
i got the module so i'm really hoping they are ok lol otherwise i get to play hurry up and wait some more
yeah module gotta be scarier for sure since there's way less packaging/surrounding things there
Surprisingly, I think I've only seen one or two posts with people that had broken or lost switches. Granted, 4,000+ packages went out like that, and I'm sure not everyone uses Discords to show the packages.
Were the modules getting shipped in bags too?
i don't know they were the last things shipped so maybe some got boxed
i haven't seen a module in bag report, but modules were shipped later so maybe many escaped the no box fate
hopefully i get lucky i haven't seen one like that either so maybe
email sent, just waiting for response now 
one more day until the best wootings get sent though
My issue I had last night, with the LED bar being flipped over happened to someone else, but they hadn't opened their board before. Curious if we'll see more reports of that.
yours getting delivered?
tomorrow is raw zinc deliveries start if all goes to plan
oh ye
Did raws arrive?
What is keyboard chatter?
i believe that's when i a key registers more than 1 time from 1 press. or i had a drunkdeer HE keyboard at one point that would send random keystrokes i didn't even touch. i think they consider both of those chatter.
technically the latter is not chatter
chattering is a phenomenon that happens in contacts
but I have seen people label sounds of keyboards with chatter 
like that dude

anyone know why you cant buy the all white version anymore for the 80he?
Oooohh yeah
because a certain influencer thought he found an issue so wooting is rechecking all their boards and manufacturing
Did you go for long poles
no there are a lot of differences
atm the suspicion is that what wore was the shitty black nickel plating on his keycap puller
which left residue on the board, which could have been removed if he tried a bit harder
for zinc alloy white theres some problems mentioned in #đŚâbatch_updates
"problems" 
oh yeah right cause i was so confused as the other day they had it up when i looked and then today when i went to purchase it it was gone, thought they ran out or something ahaha. cheers guys
but basically bottom line was they thought they could do better so stopped it to figure it out. they've reacted to problems pretty quick.
Common Wooting W
We got a great case and 40⏠store credit 
yeah i went with black zinc module last march should be delivered this morning đ looking forward to it
yeah i just hope my jades get here still in the container :p
Ouh, NA shipping 
yeah who ever at that warehouse thought that was a good idea wasn't thinkin. but mine may have shipped late enough to be in a box we'll see
People act like they play tennis with a keyboard
will be there any update for second batch this week ?
yup
no thanks
Another week, another update to a later delivery date. 12/10. Is the RAW the culprit in this drama
this dumb hurricane is going to delay me getting my keyboard
đŚ
Safety comes first
free disassembly
easily tape moddable
+maybe permanently damaged/lost
mine shipped after they noticed the bag issue so probably not
worst case scenario it comes to me soaked in water
Anyone got the black 80HE? My lightbar on pure white is pink af lol
yeah its pinkish
There´s a setting for this.. I remeber that this topic has been discussed before
lmao, wth
Try 195.255.175
As the RGB? Just makes it yellowy/green
thats a little better but still greenish
ok.
For me its worse not better
Then... it needs to be refined.
Yeahhhh, my other keys set to white look perfectly fine, its just the bar
Try make a search in this channel. or make a support ticket if you need more assistance
i have my global brightness at 100% for the keys but its till not super bright or anything. My huntsman v3 for ex is noticeably brighter
we´re one of the few people who want more lights.
Really? The more brightness the better
I want more brightness, but colour volume is important too.
The purpose is it pops and looks great
yeah but it's not that dim
yeah so the ones with razer have good color consistency and they pop
decent lights is enough
I miss the volume wheel on my keychron
Same! I miss the volume knob from my DD and Razer. I keep reaching for it then realizing i dont have one
What did you use the ports for?
there´re a lot of knob accessories
pretty sure they'd need to program the kb to accept a certain knob switch
wooting is gonna make one from the looks of it

Batch 2 is getting a update today right?
We've made no such promises.
We've said there's probably an update sometime this week.
what is batch 2? is that na-bridge?
Bridge and Brug, yes
thank u :D
is mine 3rd batch?
Your profile says Brug - which is batch 2
Please don't share your tracking links.
oo cool,
oh is that why most of our orders are pending?

well from what i've seen so far who are in the 2nd batch atleast
well mine not pending
when are u estimated to get the keeb?
6-27 Nov
shi alright2
yup, but it wasn't like 2-3 days ago
just been checking everyday and its still pending unfortunately. sent an email just waiting for a reply
what the estimate says before getting pending?
like 2-26 nov i think
nope its just base everything
Any chance of the batch confusion with orders being moved to Bruinvis being automatically resolved? almost 2 weeks waiting on a response from support at the moment
All their updates are on friday so if they do make an update itâs gonna probably be on friday
not always on Friday
Pretty good
99% of the time then, because even the white zinc alloy update was on Friday
Not good
Ok
any news about the raw zinc alloy ? i still see my order getting puhsed every day đ
oh ...
i kind of start to think i would've take this abs case đ
can you guys add one to our order please ? đ
I think raw looks great
My order is "Current Stage: Your order is being prepared to ship to you", it has been that way now for almost a month now. The date keep being pushed day by day, any information on this? Ordered a 80HE module with raw zinc. Current delivery date is currently 14-25 Oct but started saying it would be delivered last month according to the hub.
bro just read the 2 last lines ...
DHL good job
some ppl didn't get their board stop teasing them pls lol
Oof
lol means laugh laugh means joke
yeah?
I thought llj was laugh laugh joke
honestly i'd take that as a win, least no switch damage

when the mass production started for the second batch?

Rip
No
Raws still havent arrived at warehouse apparently
16k hz will be out by then

get what to work:?
"bro" just read my whole message. The delivery date have been pushed forward day by day for a month.
Appreciated.
If you want more info you can check out the last post in #đŚâbatch_updates
Oof youâre officially on the third batch. Congratulations
is that a sarcastic congratz?

are third party 4.5U stabs just non-existant? I only ever see 6.25/7. I was okay with it costing more but I did not think they would just not be available at all.
It means that we no longer feel bad for being batch 2
You guys will get to be bullied by us now
Am i the only one?
Youâre the first one I've seen
đŚ
racism

i dont want to play it down. but how do you guys even find those i mean i dont look so precise i mostly would not find it at all on mine - but on the other hand i hafe black.. wich literly hides a lot. better than white
?
I dont know. I just want to be irate about how long it will take
Look at the positive side. Pick what you want to order now, and youâll be on a batch with less buggy
A lot of peoples orders are being semi destroyed due to the packaging here in the US
When did you order?
last night
It is like that only for americans
Can someone recommend me any type of lube and syringe for my stabs?
Doesn't wooting sell their own brand
not syringe iirc
They don't have what I need
Yeah we don't do the cheaty syringe approach. We open them up and lube them with a brush from inside.
The stabs as well? I don't need to do my switches
Will there be a new HE switch out by then?
buy your stab lube in a syringe that way you can do both the syringe trick first and if you still have issues you can do a full relube
Wdym?
Where do I get it
Just the stock
Krytox XHT-BDZ Lubricant is a very-high viscosity, thick lubricant that is primarily utilized for keyboard stabilizers to significantly reduce the rattle of your stem. This is done by applying the XHT-BDZg1.5 to the stabilizer wire. Note that it is not recommended to apply the lubricant to the stabilizer housing. Kryto
if you want xht-bdz
Idk what that string of letters means
otherwise you can buy syringe by itself and a tube of any of the thick stab greases
I thought it said DBZ
So there are only like 5 switches for us to try
I want something new
doesn't matter - they just are the name of the grease
Ah
And what did i just wrote 2 sentences above ? :p
On your package youâd only be getting v2 Laker switches
Oh I am going 3rd pt for sure
Damn that's $26? In USD as well I'm guessing
honestly only downside of xht-bdz is that it's pricy enough that you could just buy knight v2 stabs and use some 205g0 to lube them lol
Itâs custom molding for a syringes they prob donât sell any 
if you already have 205g0 then that's one of your options - to just buy some stabs that run without any thick greases
did you get ur kb already?
I don't have anything that didn't come with my 80HE
nah i'm raw zinc
those still werent sent out?
if price is an issue you can buy a tube of super lube and a syringe and fill it yourself
that's cheap stab grease
i learn from igor
tomorrow supposedly for EU
so far im very happy with the kb. had one time tho where it randomly stopped working in the middle of a game and i had to replug it
i'm sure amazon or aliexpress sells cheapie stab syringes filled with lube too if you want to save a buck and don't care about cloned lubes
keyboard disconnected moment
âthrough goes hamilton!â
it won't be authentic krytox but it'll be cheap and work ok
kry me a river
do you not like s205g0 for the stock ones? being on 4.5u it seems i have no option for swapping to any other kind of stab so ill have to use the stock
it's too thin for the wires on the stock ones
you want thicker greases for the older gen stabs that aren't as tightly fit
hmm okay, not sure what i should do then in my case, feels like no choice but to spend 20EUR on some syringe
Just want thicker lube on stab wires in general - because it will just drip and fall off otherwise. They don't have a housing to keep it there, it's directly on the metal wire.
all of these stabs im seeing only do 6.25/7 and i dont really want to attempt to make a 4.5u out of it
This is what you wrote:
[11:45 AM]exo: i kind of start to think i would've take this abs case :unamused:
[11:45 AM]exo: can you guys add one to our order please ? :slight_smile:```
well if you must buy new stabs most of the good stab recommendations these days no longer require thick stab lube
knight v2, typeplus, tx ap for example all 3 don't use anything more than 205g0
Turns out it's AUD 
the thing thing about a tube of stab lube though is it will literally last you your lifetime unless you start modding keyboards for a living lol
i wanted to, but they're always 6.25/7u, and the JIS spacebar will be 4.5u. I searched everywhere but nobody sells them, I did not imagine it to be that hard to find
can't you just buy 4.5u wire somewhere
hmm
i dont know if it would work with for example I'd buy those knight stabs that people seem to like, and any 4.5u wire would fit? its worth looking into i guess..
so far not much luck finding 4.5u of anything tbh
well knight may not as it uses a specific wire for the new v2
they're made by swagkeys right
yeah
jis layout is kind of rare so i guess finding wires for it is tricky
is it really a 4.5u wire? I've never played with jis before so I don't know
yeah
I guess you'll need to go the oldschool path and just buy some thicker stab grease
ship my raw
shld I lube v2s when they come? ik factory lubed but still
if you're on jis layout you may need to do it again in the future anyway so maybe not too bad a waste to have some stab grease
yeah i think that will be my only option. why would i need to do it again in the future cause of JIS? just curious
for future keyboards
one tube will probably last you a lifetime lol
just because it's hard to find jis layout 3rd party stabs
oh okay, yeah so if i am to buy anything at all for these stock stabs, you said this one right
the wooting set looked alright but i feel im gonna need that syringe đ
yeah that's the one I use for older style stabs
alright thanks
syringe is cheap, you can buy one anywhere from amazon or aliexpress
if you're really on tight budget just buy from aliexpress
will bookmark it and buy it incase i dont find a solution for the 4.5u thing. maybe i can use my wooting store credit to buy their thing if the syringe can just be gotten elsewhere hmm
it's 100% fake though, but eh it's still lube
And that juste above : any news about the raw zinc alloy ? i still see my order getting puhsed every day đ
oh they had molykote, not xht bdz
?
molykote is fine too. It's just a bit thinner than xht-bdz
i'm talking about aliexpress lube
yeah that makes sense
they just make their own version of krytox lube
of course they did
thanks for the help appreciate it a lot
you can skip the syringe too honestly if you're worried about it
it just means you have to do the full take keyboard apart and disassemble stab etc
the syringe trick is just for a quickie fix type thing
wouldn't the syringe be the easiest way. I don' really have the time, or even want to take apart my board
generally it is yeah
hmm if i can grab one for cheap on ali then that seems like a small convenience to get it done, for my gx1 that has a slight rattle too, i think the syringe is the only way to reach it . its a weird board
oh if I wanna do the polyfill thing, thats the stuff you find in stuffed animals right? lol
hi there, how did you solve yours? able to share the step by step process? i want it to show on the led bar when i toggled the caps lock
You add the caps lock effect to it.
ngl on most stabs I only use the syringe
i did
only time I do something else is if there is a lot of friction on the stem and the housing
You have effects stacked on effects.
Maybe clean that up a bit? And disable the global.
This is mine - Dark lightbar, except it goes full pink when caps lock is on.
mine just moves with the lighting lol
but it doesnt show up now
even when i toggle the caps lock many times
exact same.
okie thank you
btw, it was working ytd
today i tried to import new profiles
it messes up the rgb bar
How is everybody in here today
Hoping for batch 2 news this week because another hurricane is going to obliterate Florida
Lmao
Im mostly joking
But there is another hurricane brewing
They better do it now so by end of December its find by then

just watched it, cool case for 360 Euros
That's a beautiful case
He gave up on his wooting review I guess..
probably has a line up of videos planned
He is putting a fight but in the end he will upload it, probably he had those in the list before he acquired the 80HE
The keyboard is unique because of the paint loss
Nice translation...
yeah deepl is a little better than alibaba translation it seems
what is kan'yi
I love clapping keyboards
he wants a photo of my keyboard to confirm sizing will fit
kanyi west
My flatmate has his unused in his box if you wanted an official one 
it would probably cost just as much to ship that undamaged to korea lol
This is true
i am mioni for all his picture needs and purposes
I live in central Florida
Ah shoot
holy fk my internet
we'll see if he replies tomorrow so I can order the dust cover
Pog
I just sent this pic to my brother in law
found geon raw in europe
You guys are having a hard time over there
The first one missed most of Florida so the divine beings sent another đđđđ
Maybe I can take it in my luggage when I go korea next year 
He edges us
Will u see crocodile flying in florida today?
Not today but like Wednesday and Thursday hopefully
Sharknados maybe
Hurricane is coming and all I can think about is hatsune miku
Whole Florida is being affected, early signs was maybe 80% of the state
Ah I see
Still hoping mark is right, ik he says it was something like âmightâ or âmaybeâ but I still have faith lol
after what felt like 900 years my keyboard is out for delivery today đ
Happy for you
Time to enjoy it

Sounded like that xD

Hey man its gotten so bad Ive been dreaming about my 80he

I can't imagine how it feels for you
hahaha I'm still waiting for it too
i'd go insane seeing videos and knowing it's still a while away
That's only for Batch 3 people
Let be real our stuff is coming january
Yeah ik, some people other pre orders end up in batch 2 which is interesting
If NA had an additional month delay wouldn't be surprised the same thing for us
N those guys were founders
Im going to strangle you if you jinx this.
/jâŚâŚâŚâŚ.
If our expectations are low then weâll weather the storm
Anyways I doubt much people would order enough in Florida to push my order back
Especially since I ordered early july
Unfortunately it doesn't work that way. Once the whole batch order is ready from the factory, theyâll send it via a cargo ship to their distribution place in the west coast
So expect extra delay for being on the east coast
Yeah. i expect like maybe December but nothing baffling like January
Fingers crossed !
Thats if there were a delay to happenâŚ
I'll have to ask my neighbors to get my package if so
My fingers are crossed for an on time estimated delivery
Im hoping early December
The doubter
wooting80he Is 100% brightness recommended?
Holy moly
blindness is weakness leaving the body
Turn off

Surely⌠he will upload an 80he keyboard review⌠right guysâŚ
Where do we Europeans buy geons nowadays without 20$ shipping costs?
Ha..haâŚ
Flashbang
At this rate I donât think he will
He probably feels as if he missed the boat on the review of the product
With the delays n all
Everybody has probably mentioned the same thing he wanted to say
ordered mine on ali from kbdfans store
hello
Anyone test jade pro or jade max and lekker v2?
Iâm wonder it is worth for changing lekker to jade max
Anyone else on eu brug ?
yep
Yeah it looks like jade are overpriced
why would that matter tho.. hes for sure gonna release one
me
Heeeey, is that the RAW???
ive been following your progress so i can order it too
I'm super sad to be in the dark for the RAW. What is the latest news about it?
Never mind! I've been looking at the pinned messages and the Batch updates but for some reason missed that last one!
Thank you my friend!
yeah it is. it's from mioni's video
how did you get the raw case ?????????
Was that the one already shared here? Try googling mioni wooting 80he and nothing came out!
Its not his
it's from the japanese reviewers video
Got it!
oh đ
Couple weeks with 80HE. Still great. Only con I've really found is that the RGB was disappointment as were the wootings own PBT keycaps (iso nordic) - kind of dirty letters and the translucency of the letters has a clear red tint to it.
Thinking of buying non-translucent keycaps and disabling rgb altogether.
Ty. Will post further and more collected feedback about this when I have more time.
help
IDK?!?!?!
(This is a grammar joke - That apostrophe shouldn't be there)
I chose to just get the white Alumaze80, but why was my Wooting 80 order put on hold?
Lol's
Because of the investigation about white cases and scratches.
@buoyant solstice but hows your day been so far?
yo i just refreshed my page
all jokes btw â¤ď¸
thanks for clearing that up. you almost had me.
np
Is there a problem with Raw too? I haven't gotten a reply to my email.
On hold 3 days alr
raw zinc is coming in this week to ship supposedly
they had to re-do the polish on them
raw zinc btw
oh yeah dante and some others got raw zinc sent already somehow
How are you that lucky?
I put the raw zinc case on my wishlish and hope I'll get it for christmas lol (you're never too old for a wishlist)
maybe there were a few that cleared before somehow for NA
praying i guess
So those should have the polishing issue?
no as in maybe some cases were okay or sent earlier
Ok, makes sense
polishing issues was resolve, just delayed to fix it
Btw,hope eu brug not delayed lol
I guess if I wanted to add a second 80HE to my order it would be delayed right?
How do I remove the hold?
You email us and wait.
For batch 1?
yes but I already sent you an email but haven't received a reply
Yes, adding a 80hE pcr ghost
Thereâs no more batch 1 left youâd be batch 2-3
3 if itâs anything but prebuilt ansi iirc
Then I guess I will wait lol
Batch 2 almost totally gone now too
You could make a separate order and squeeze into batch 2
Which would be like a month and a bit probably
And if it's only a separate case?
If just case youâd have to look at the site and see stock
It tells you when the batch comes in for x
Thanks
pretty sure it was late october/early nov or something like that for most case stock
https://wooting.io/product-status?app=batch-checker
Here you can check the batches and current avialability of almost all products
Check your order status, or see the status of current and planned batches.
Yep, it shows late october
And that's when it will arrive at the warehouse, it will take another few days or some weeks until it is at your doorstep
Yes, I will keep my order as it is. It would be worse to change it
my 80he keeps spamming 1111111111111111 randomly whenever i'm gaming anyone else, only fix is unplugging and plugging back in.
Latest firmware?
yeah.
Tried another usb port and using original cable?
yes, yes.
Try turning polling down to 1k and see if it stops
contact wooting suport and get another for free 
(joke)
lol id rather just keep mine anyways. just have never had this happen with any keyboard before.
ill try the 1k polling was just looking at that.
Thereâs been some weird usb stuff with some motherboards/usb hubs potentially not being compliant or buggy somewhere
ahh okay okay, ill try 1k polling rate and see if that helps.
You're the second person I saw here with that problem
Oh boy
yikes.
More batch 1 issues

itâs an ongoing thing with something to do with high powered usb something or other
Is it happening to specific boards/manufacturers or (un)luck of the draw?
Not the actual pcb so please stop freaking people out lol
Good evening everyone, i am currently planning to order the new wooting 80he, however, due to my layout missing from the available choices (italian), i was wondering what would be the best choice between buying a set of keycaps aftermarket or just going with whatever the closest layout on the site is, and then just buy the specific keys afterwards or an entirely new set, what would you do?
i only skimmed over it a bit but it's just something to do with some usb power stuff maybe with firmware or similar, most of it got fixed with one of the alpha updates but some still have the issue and going to 1k polling seems to have fixed it
i think its more fun to put in a keycap set that you think looks great
Just buy prebuilt ISO without keycaps and buy keycaps seperately I guess (As long as italian layout uses ISO)
i swear half the scares in here are caused by bored batch 2 people freaking other people out more than needed lol
the thing is, i'm not exactly into keycaps and all those differences between materials, form factors etc, so i wouldn't know what to buy, the only thing i would care about is something that gives off the same ghost vibes of the case
agreed
I personally prefer dye sub PBT, but it's all personal preference
which ones would you recommend me, that have the italian layout available?
A fair amount of folks are also very skittish so once 1 person comes in with an issue, then everyone comes out of the woodworks (white case/doc workers strike comes to mind)
i've read about the differences but in actuality i have really no clue about them in practicality so i wouldn't know what to get
For anyone with sticky stabs. Have you checked the pads below the stabs? Iâm wondering if lube is getting on them and causing them to stick.
Very accurate
it's like the whole jade switch wobble thing
you'd be better off just buying a board with no caps then looking locally for dedicated italian sets
buying specific keys after getting a full wooting pack would cost a lot more
one guy posted a single reddit thread with really poor quality keycaps showing his space bar wobbling on jade switches - forever since then everyone blindly states that jade switches must use long pole stabs
Return it, immediately.
Cant you also use the little circles to put on the stabs which negates the issue
Thatâs unacceptable, please send it to me for further testing..
same, for me everytime I use another gaming keyboard it feels like cheap garbage, can't believe Wooting let these quality issues slide
u can like walk slow with wooting?
yep. that and only 1/10 people maybe have this if not less
like controllers
if you set it up as a controller yes
But depending on the game, it will disable your mouse aiming.
I haven't heard of games doing dynamic input on keyboard controls just yet, but it may change with time as these keyboards get more popular
wooting 80he, stop being perfect đ
next 80he stock will be here on december
anyone else having issue where the 80he just freezes and stop accepting input
happened 3 times to me already since i got it
had to replug it
Are you using 8k polling?
Click on Settings in Wootility, go to keyboard settings, and switch to 1k Hz
See if that fixes your issue.
8k doesent work?
Iâm noticing a common theme with the keyboards freezing / becoming unresponsive in 8k with various people.
It does, but I think thereâs issues with certain CPUs.
i think it can be repro by spamming keys
if wooting ever releases a wired numpad ill be there to preorder right away
Same
wht abt my i7-12700

I canât say for certain. But also, 8k isnât necessary in all honesty.
lets ask chat gpt 
lol go for it.
im safe 
400hz dude
shhhh
tn panel đĽ
how can u be ok with tn panel
i mean, are fking amazing for competitive, but does it worth the image quality?
No wireless mouse?
This is amazing! Did not know about this link! It says the RAW cases arrived, can we consider that to be the latest update?
whats the difference of 80he and 60he? (i got a 60he)
well i have a gpx superlight 2 razer viper v3 pro and an op1 8k currently been maining the op1 8k
just the size
wire be gettin all over my mousepad
More keys, gasket mounted and 8khz
And LED bar

in my opinion 8khz and 1khz on a keyboard dont have a huge difference like on mouses
For batch 1 it arrived, but if you buy now you will be in batch 2
and better sounds
idk what is gasket
from the key presses
lol
I agree. Not worth my CPU crying out in pain over it lol.
I bought in MARCH đ
i bought in march aswell n barely gettin it today
I have a good feeling about the raw zinc cases guys. I think this good feeling is the right one this time
and in my opinion wooting 60he is better than 80he
is there anyway that they bring an update like 2khz 4khz ? or is it not possible?
why
rage bait ?
because 8khz is too much for pc
Ahauhuaiha you said this a few times already mate!
Bruh. But in that case it should have either already shipped to you or will ship to you somewhat soon
60% of the time my feelings are correct every time!
more beautiful and has a strap đđ
There were problems with the RAW case, so I'm still here! I believe the majority of the RAW Church members are in the same situation as I am.
if u can afford 80he its bcs ur pc is alr good
Well, let's hope you increase th percentage to at least 80% đ
I have a 3090 with 12900k still getting issues on 8khz sry bro but 8khz is just to much for fortnite on 360hz/fps
isnât 8khz unstable atm or something
or is that ppls pcs just being bad
better they bring a update with 4khz so I can love my wooting more lol
8k polling running perfect on 5800x3D for me
thats why i think 60he is better
ah then it should run perfect on my 7800x3d
more functions, 8k polling and v2 switches: 
they should put an adjustable polling rate like on mouses softwares
f keys
most important part
Can I get a quick opinion on the geon raw switches? Recommended?
yeah that'd be crazy
like 1k, 2k, 4k, 8k
8khz on a fast game like fortnite is a bit to much for all other games doesnt matter anyways
same dude trying to say 60 is better btw
i mean because of the issues

ima be using 8khz for league of legends
Scan rate with Tachyon mode is faster on 80HE vs 60HE isnât it? 0.125ms vs 1ms?
lol
more poilling rates will be added just that v5 is in alpha rn
Yes
opinions about g pro x superlight?
technically yeah but most people are still playing on 1ms monitors or more so
no
bad
there are so many more better mice for the price of a superlight
even the good wireless mice are like 10ms and people aren't complaining
I am a gpx hater myself but you cant just say that its bad
opinions abt viper v3 hyperspeed?
Is there a delay expected for the batch EU-Brug ?
Iâd go Viper V3 Pro over super light
remaking 3 same mouse is bad 
i want it JUST for aim
doubles the price in my country
he said he cant afford viper v3 pro
needs GHub
get superlight
But at least Synapse works. lol
i will get beast x
yeh?
their new synapse app isnt bad and people should stop hating on it lmao
"synapse needed"
yeah just use it to set up ur mouse and uninstall it
any background app requires hate by default
no one said razer made good keyboards
ive been using viper v3 since its release and never had synapse running in background, because its not needed, when I need to change something I just open it and then close
ive always just used the software a few times
just like any other software
why all pros use g pro x?
Because they get sponsored to.
it still runs unless u go into service and disable it, it auto turns back on when u open synapse. really there to take ur ram usage 
Alright Ill show how much ram it uses smh
not an option, ppl who earns millions wining tournaments, and ppl who lives from copetitive games are not changing their mics just for one sponsor
synapse being mandatory for Razer hasnt been a thing for a while
Synapse is fine tbh. I feel like the hate it gets is out dated.
they are
its just a meme at this point
Unusable!!!!!!!
they actually are being forced to use logitech because of sponsors, unless u are a top tier mvp player with exclusive contracts
Youâd be surprised lol.
what about the people who are in tournaments who dont win?
where do they get money?
sponsors.
if you guys want to hate on peripheral gaming software ... lets talk ArmouryCrate
its about having it run all the time without the option of not letting it run in the background
this shit is ass, i tried using it to change the rgb on my motherboard and it never worked
a billion dollar company cant even give an option to stop running their shitty background apps? 
It blows my mind a company that big produced a turd like ArmouryCrate
Oh no, what am I going to do without that spare 0.1% of my ram!
it takes 40mb ram, oh no its so ASS
then the same as wooting doesnt matter literally below 1ms difference to competitors đ¤¨
wow what a comparison
wooting doesnt have background app running if u dont want too
deathadder v3 (non pro) vs g pro x superlight
damn cant imagine how razer cant do that
Tell them to stick their ram up to their poop shoot
do you know that running synapse isnt even needed for mice?
it is when u want to change settings
Depends on the setting
for anyone that is in NA Champion w/ econ shipping via USPS - my tracking updated today from USPS awaiting item in CA on 10/2 to out for Delivery in WA today
there were no arrival or depature scans in between
? you change settings and it saves then you close it
like i say it still runs unless u go into service to disable it manually
The software that shall not be named
my apologies
Yes razer service is running which takes 40mb of ram
yes why is it running when i dont want it to?
Oh my god
Probably auto updater.
so it can record your incog browser history
Like most programs that will run a low usage service on launch
ghub literally takes up more ram than @lime falcon 's synapse
not if u disable it, razer services will always run unless u manually disable it
and ghub is needed for me since i use a sim wheel from logitech
yeah this piece of shit asus software too
Yeah the one thing I deeply regret is getting an ASUS mobo
never again
same as razer cant even let user stop it from running without manually going into services
meanwhile my last update from UPS
lucky you
Did we have an option the method of shipping
It looks clean, but the experience of having to have armory crate bc everything unzips and installs in the background without your knowledge is wild
is there a way to stop the keyboard from going to sleep after idling for a bit ?
you mean RGB?
ya
u can do it without armory, but got to download everything individually from their websites
go in settings and disable this
That never worked for me đĽ˛
I could probably uninstall it now, but I donât wanna jinx it
ah ok thanks i was looking in the rgb settings at first đ
there is a uninstaller to remove it cleanly too if u have it install. dont really need it for anything afterwards
i only have my gpxs connected rn
viper v3 hyperspeed vs gpx
hyperspeed is bad
I want to ask you guys, I bought 80he and want to change to 60he+, is it ok?
refund through email and buy 60he+ afterwards
Want to buy it again?
they cant change it from 80he to 60he, u have to ask for a refund
80 He felt that he had waited too long and wondered if it would be delayed.
You need to cancel your order then reorder 60he
most likely no delay if u didnt buy white zinc case
The order has been sent out It is not shipped yet. It is in production.
i opened it up and just put the silicone led bar back in the slot
Yes and you knew that
I bought a PCR
should be fine if u are willing to wait 1month+
dont question it just accept
u know what does it mean?
yes 
me waiting until december:
not even funny at all
and 54⏠delivery
u missed the 2nd batch by 1-2 weeks 

but hey it can be a christmas present for urself
I am willing to wait for a month. If the delay is 2-5, it is too long to change to 60.
youll get 80he in november
if you dont want to wait until november cancel it now and order 60
damn the mods got his name 
lol
if u can wait 1month u should be good
FUCK THATS TRUE
I CAN GET IS AS A CHRISTMAST GIFT
I can wait until November. If it is delayed by 2-3 months or 7 months like the first batch, I will directly change to 60
I FORGOT CHRISMAST EXISTS
It wont be delayed lol
Batch 3 souls
yeah u good, wont have much delay when they learned from the first batch

Any insights?
I'm not teaching others that the first group of people want this thing, get it as soon as possible
yes - economy or "express"
1k polling seems to fix it
I should look back on my orderâŚ
it shows up on hub
What im gathering is if your cpu sucks you might not be able to do 8k polling
you can but even with a beast i9 it will take ~10% CPU and some people have noticed lower frame rates
nah you're good - just dont freak out if there is no acceptance or transit scanning in between
thoughts and prayers that mine arrives in a box
I would be nice if wooting made different polling rate when playing a game. Like 1k polling when normal usage and it switches to 8k when playing a game.
please Lord Cthulhu đ
higher number = better marketing
Because it requires reconnecting USB to do so.
like the DPI race in mice
Razer mouse can switch without reconnecting usb
i was suppose to received the keyboard in September, but they only shipped it at the end of September
27th September they sent the keyboard to UPS
4th October, no updates on UPS tracking so i contacted customer support
Today i received a notification saying the keyboard returned to the warehouse... so idk when i will ever receive it
No movement since Friday
Business days..
Is your order express or economy
They literally say it will take a few days to see any movement
mine was the same w/ USPS - no movement and suddenly out for delivery after 5 days
Jesus
i mean i waited a week and now its back at the warehouse
did they say why? package burst open? label was messed up?
na they just said your keyboard has returned to the warehouse, and asked me to reconfirm my shipping address or if i want a refund
"We returned your package to sender due to hearing jangling loose objects in the bag"
They prob thought they broke something
sounds like it was a delivery address issue?
And didnt wanna get in trouble 
(they did)
100% refund and given a free keyboard?
i mean i had the tracking for over a week without any updates till today saying it is back at the warehouse.. i replied their email, not sure when they gonna get back to me
what are you babbling about 
Morphenâs keyboard was in transit, then middle of transit was returned back to the warehouse
yes?
If youâre waiting 6 months for a product idk bro iâd be livid
If they can't even get it to me
being livid does not grant anyone the ability to get a free keyboard
I still don't see how a failed delivery constitutes getting your order for free.
In the US it does, you should try it
ill just wait patiently hopefully can get it before christmas
No it doesn't.
mmm yes letâs have wooting lose money for a mistake that isnât even their fault
A lot of companies bend over backwards
Good for them I guess.
my hyperx keyboard is semi broken đ
I don't think it works that way
I know for sure Amazon does
Did someone say I'm getting a free keyboard?
amazon makes billions, wooting makes a dime, no free keyboard for anyone on Mansen's time
It works exactly like that though
amazon is one of the biggest companies in the world- there is no way youâre comparing amazon to wooting.
was the issue with the delivery address or anything i can help?
Iâm sending you a single bit of PCB left over from what i had for lunch 
mmm 60he pcb yummers
add in some lekker switches as a dessert
Yes its a primo wired Dell membrane board
I mean wooting even does a second set of address confirmation
mint condition - never taken out of the box
So there is no way it could be that
thats a pretty definitive statement
I can list you another 20+ companies that operate like that in the US
The tracking link should state why the package was returned to the warehouse.
good for you man
Unless the user messed up twice
It really is good for us for the consumer.
the tracking link still says that, but on wooting hub, it says returned to warehouse
đĽ˛
Not sure why youâre thinking companies are your friends. They exist to make money and run a business
I had no idea the hub would update for returned items
And we don't? I fail to see the logic here.
Anders is my friend. He told me so.
If I had to guess, it sounds like the barcodes on it got messed up bad enough that they couldn't scan it in, and had to return it to the warehouse.
If it was on the poly bags, I could see them getting torn / ripped.
If in this case the costumer failed to get the product they paid for, Iâd say the company has to face losses for not properly meeting expectations yes. Thatâs business
which means .... they could put it in a box!
Yet*
They haven't received the product they ordered - YET
I mean .... they are still going to get the item they paid for
During tax season thereâs a small box that you can write off losses
the costumer in question
I like it
đŚ
anyway they're gonna get the keyboard, a bit later than expected which is unfortunate of course
If the guys keyboard gets lost, I'm sure Wooting will take care of it. But they're not going to then also offer a refund on top of that.
itâs a threat to freedom I tell you hwhat
I mean⌠it sounds like from morphen they aren't getting it anytime soon with no timeline and outside the expected delivery date
thats what you took away from all of this?

bruh
What
his package isn't lost - its back at the warehouse. They repack/relabel it, confirm the address and send it again
Was there a guarantee from Wooting the product would be delivered by a certain date? Or do they list it as "Estimated" ?
Do i put my l45 v2s in my 60 module 
this isn't pizza delivery where your pizza is free if not delivered in 20 mins
hopefully ill get it soon i guess or with a timeline đ , my hyperx keyboard has like 10 keys which are undetectable
Tbh thatâs a really good question. I wonder if I should look into costumer protection laws about it
Hey hear me out

you will
Geon Raw HE.
I donât got raws
hahaha
I knew it 
Iâm no lawyer, Iâm just a consumer anyway not my field
There are too many Geon zealots in here
Yes

Geon raw gang
Does your 60he have L60 v1 now?
so called freethinkers when geon raw
They give you a date range. Any delays caused by the shipping company are independent of wooting. Wooting isnt liable for shipment delays and lost packages
1.5s
That doesnât make sense tho, think about it. If the package is not lost, they sent it with an address already attached to it so they originally knew. They can also manually put that ID in, I worked as a side hussle doing some FedEx deliveries as well
So middle of transit they went âwtf where did the label go bro, lemme just go backâ
Geon Raw is a cult. Don't fall for it.
It's not a cult, it's a gift
I already got L60 v2's with my 80HE
its a gateway
Geon Raw's are the best thing mankind has made
#based
Godsent
yeah was like over half price too when ordering the 80HE, ez decision
waow, 1 more month wait for me
or like, 28 days
yes
optimum video 4 hours ago still no 80he in sight 
He likes his case
inb4 wooting delay moment
This is not his case
am kinda expecting it to be late
Hes edging us
@scenic igloo the switches arrived đđť
Wait which kb is that
ÂŻ_(ă)_/ÂŻ
Pray
The 65He, a secret proyect from Wooting
I think thats EGG KB65?
Looks like atk
1 more month until batch 2 crew!
In Geon, we trust
Probably he recorded that video before getting 80he
he got it like 2 weeks ago no?
No clue
maybe they paused it cuz it scratched very easily
and in that case i guess they don't know when it gets updated. when they're able to fix it
He has 30 days if he doesn't get it he can claim a full refund and still get his keyboard
US costumer laws baby
That is not what that says at all.
That says the item needs to be shipped within a certain timeframe, or notified it won't be shipped within that timeframe. The item WAS shipped.
His package was returned to warehouse. Thats outside of wootings controll entirely. In what world would the shippers mistakes deem him a complete refund from wooting?
what? learn to read what you just highlighted lmao
Those laws are designed to protect consumers from ordering a product, and just literally never having it sent to them. Not for an item that was shipped, and had issues with deliver due to a courier. lol
btw it's customer, you keep typing costumer which is a different thing
Read last paragraph, letâs pretend itâs been past the delivery date and letâs add an additional 30 days that they haven't gotten their product if they do not agree with any further dalays they are entitled to a refund
Even if itâs on transit still
Oops my bad
Deegs. Please stop trying to spread misinformation. You've crossed a line between being ignorant and posting stuff you clearly haven't read and understood.
Its not even your order
âLetâs pretendâ
the customer received information of the delay, got an email stating they have the right to cancel and get a refund, or wait for a new shipment. what's so hard to understand here?
Iâll stop talking about it here after this, pretty simple. If there is a huge delay and the item is still on transit the individual has the right to cancel depending on the time frame. Anyway, itâs w/e
đ
Odin's so forebodin'
this is one of those 'I read a couple reddit threads once that gave a rough outline on this and now believe i am an expert on the topic of bird law'
Going to x and going back to the warehouse is not considered transit? 10-4 anyway itâs not worth discussing
I donât think I am nowhere close I just think we as consumers should try to figure out tools to defend ourselves if big delays happens and see what can be done, thatâs all
Your tool is right there - You have the choice of cancelling your order right here and there, no questions asked.
The delivery failed.
That gives you two options. A refund, or us attempting to deliver it again.
re deliver please đ
Please explain that via email if you haven't already. Nothing I can do for you here for a specific order. đ
Tldr; What happen?
overly enthusiastic teenager trying to fight battles for other people over something he himself has a confused understanding about
Someones order was delayed / returned to warehouse, and Deegs became a US Consumer Protections Laws expert suddenly to let us know Wooting owed the guy a refund. lol
so basically the story of maybe 50% of all the arguments in this channel lol
that's a bit harsh
just a concerned and well-meaning citizen
Iâm not any of that, I am just a concerned citizen looking out for my kind

biden's america 

This is Obama's fault.
on god on god
im with u bro
Actually itâs climate changeâs fault, itâs making every US fulfillment center panic smash every foreign package
Are you from the US? Just curious
if that happens, and i ask for a refund, i still get the keyboard?
everybody is telling me Iâm wrong and I donât know what Iâm saying
And they are correct.
Anders is saying you can cancel or get a refund
im not, i wanna hear wht ur saying
The only thing that FTC article says is that the company (seller) cannot hold your order hostage. They have to let you cancel it, if there's a delay to ship it out.





