#🌟│wooting80he
1 messages · Page 195 of 1
what does this mean
i've contacted them about having crooked case, after a week they got back to me with rma label and replacement offer
means theyre an intelligent team who foresaw these issues as a possibility
in case any batch 1 units have any serious defects or get lost in shipping
they have spares
It means there were quite a few extra keyboards made in case issues were to happen so we could replace
hope i did a decent job at explaining
i haven't sent mine yet for replacement, btw, and still contemplating whether i should seeing how people end up with boards that double press or have dead leds 
I would not worry too much as I said it's a vocal minority, the most likely case is you get a replacement keyboard with no issues
which game or what made you buy these wooting keyboards
durability, latency, analog tech, smoothness, geometry dash, trackmania, emulators
for me / razer snap tap banned , so i gotta go snappy tappy
this is why
snappy tappy is also banned

null binds in general inluding rappy snappy
but its still fucking good right?
ye leaning towards that as well, and if there are issues i guess there's always replacement for replacement 
currently waiting on reply if i could just get replacement case instead of replacing the whole thing, or coupon for slightly cheaper zinc case (if that's even an option)
the keyboard doesnt need null binds to be good
at least its not something I personally value
rapid trigger, analog control, the super smooth keys and fast nature of the kb is what I need
oh yeah and stupid high durability 
and for case swaps? 
playing SM64 was difficult but fun with it
contacted on sept 20, got reply on 30
also, consider that support doesn't work during weekend
Depends what your issue is if just the case needs to be swapped out to fix your issue then that's what will be sent
oh nice
how many days did it take for you to get the new keeb?
like after the reply on the 30th
well, the issue is the case being crooked and not sitting flat on a flat surface so i figured just the case replacement would suffice, but I was offered to send in the whole thing
now that i re-read the email though there is mention of wanting to investigate it, which probably involves not just checking what happened to the case, but also ruling out that it's not some other component causing it to deform
Yeah they are probably looking into what's causing it to bend in that case
i haven't sent it out yet, but i would imagine the time it would take is shipping to wooting + shipping it back from wooting to me
i think it took like 3 days for it to arrive in the first place (after being sent)?
so like 3 days there, 3 days back

anyone else experiencing this issue where a key is at around 1.27 after taking out switch and putting it back in?
pretty good tbh
it's now mid nov
i think it could only be better if you ordered locally, although i had issues with local stores that took longer to resolve lol
Just picked up your pc plate in white glory to wooting👍👍👍
do most people with the LED issues have the module or pre-built? I got module so hopefully don't get that issue, but then the replacement should be easier too? ;0
does anyone have the lekker v2's with gmk keycaps?
curious how they sound vs the regular pbt keycaps
Don't have them but this advise is basically universal
Pbt sounds a bit thockier and GMK sounds a little clackier and creamier
Which keycaps are thock enhancers
Double shot PBT most likely
yep im aware, i have both but i am curious to hear what they sound like on lekker v2's
i've heard soundtests of the stock 80he on youtube, basically want to know how different gmk sounds on the lekkers v2s specifically
Yeah double or triple shot PBT
Hi i just got my 80he and im trying to make an rgb profile where the static color is white and when keys are pressed it creates a ripple effect with another color. Right now when im editing on wootility i cant seem to set a static color. when i customize the ripple effect it just changes to that color
how does the rapid trigger work for the wooting because when i hold down a key isnt it supposed to rapid trigger that onee key?
ya seems like the only way is to use random colours
you mean rapid trigger = triggering the key rapidly multiple times?
yes when u hold it
no
then whats rapid trigger for then if it dopesnt repeat the key
my jade maxes are being processed by the delivery company 👀
ao they may show up tonight or tmr
thanks for the recommendations
might try to build a transparent Wooting 60HE+ build at some point and just swap the 80HE switches with these
Do you think optimum drops review today?
nah

He has to before his collab in october
He got his review copy
maybe the whole journey of collabrations ig?
have any 80HE owners tried any performance tests
For 80he?
When I press a button and try to press it again mid press the rapid trigger doesn’t work and doesn’t click the button again
ah that sucks..
I'm adding profiles to the board but how do u add the actual key to cycle the profiles?
It says it has the A1 and 2 by default but how do I add the 3 and 4?
Is there also a way to have the mode button cycle through all modes?
Just hold fn and click f1-f4
there is a cycle button under profile buttons
Oh ye
is that on the desktop or web version all i see are these
A0 used to be D1 before wootility v5
im like bad at looking for things i cannot find it for the life of me
Do you need to open wootility every time or does the preset save
it feels like i need to open it every time. which is why im trying to find the setting that allows me to add the ability to toggle the profiles. the deadlock profiles doesnt have the fn keys at all
im assuming its there but i cannot find it
I got Expedited shipping on my 80he despite never paying for it. Is that normal?
Or did I get a free upgrade
hmm my X key (lekker v2 60g on 80he) just started feeling weird. opened it up but idk. it doesn't feel scratchy exactly; it's as if a tiny bit of the plastic came off or some part of the spring warped. pressing down at a bit of an angle makes it feel like like rubbing a sharp object against the grooves on a record. too tired too look now. i just replaced it with an extra.
was pretty sudden too. perfect then suddenly just felt like crap lol. starting to think its the spring.
My 80he came with free expedited shipping not just you brodie
looking through other threads it seems i cant cycle without adding a fourth profile? and i stiull see no way to add keys to switch the profiles. please correct me if im wrong
u can add keys to switch profiles with the A0, A1, A2 and A3 keys
example of what i did on fn layer
oooh i get you thank you
does any1 know why when i restart my pc or shut it down my keybaord turns off everytime and i have to unplug it and plug it everytime i get on
Not sure but it's definitely a PC issue. Had that problem with my board one time and it just randomly stopped. Happened with different boards
Maybe the cable
Turn off ERP in bios
whats the full thing called
Designing my own keycap set, my setup is primary white and there is black and blue accents. Give me your honest options
What’s the full thing called
Just called erp in the bios

i noticed that the lekker v2s are not very solid, they use a softer plastic
can also confirm batch 3 is starting to ship
for 80he?
yes
well its a mode key
lookin at it closer i think some bit of the stem flaked off and revealed some bubbly bits underneath
usually people put it the same colour as f5-8 @azure garnet
some of mine for the parts where you pinch to remove the switch some of it is shaved off
that never happened on the v1
what's that?
i turned off erp and it still makes me unplug it and plug it back in everytime i sign in '
my previous msges
If the knobs come out, you guys would place on the mode key or pause key?
Maybe try another cable?
@small rune it is off and it still does it
mode
well hopefully it doesnt happen to more lol good think this came with some spares
so it looks less out of place
im using the cable the wooting came with
Or other usb port
I will have to remove all 84 lekker v2s when my jade maxes come soon 😭
lol i was thinkin abt changing order to module + case so i didnt need to remove all the switches but i didnt wanna get stuck into 2nd batch
Done, any other thoughts?
continue the colours
But the main color is white 😄
I like this, but this website doesn't allow me to design it freely
The website combines all of them together
what you like now wont be what you like in the future

just take a break and look at it with a fresh view
you will spot what you like or not easier that way
True true, thank you 😄
lets fucking go chat
does any1 know why when i restart my pc or shut it down my keybaord turns off everytime and i have to unplug it and plug it everytime i get on
Can wootility recognize it after restart?
try changing ports
My 80he comes in tomorrow😍😍😍
Try a different port.
@atomic brook How about this?
with white zinc wow
clean ass mf
v2 lekker switches?
Idk I heard something about the case or something
I’m thinking about ordering the 80he soon which is why I’m wondering on wtf to buy
It’s the white cases, monkey 
God I wish the keyboard wouldn’t take a year to come or something
I wanna make bad decisions and buy it rn
U mean eu-brug?
Cuz in my case its still mass production
he is obviously joking
our batch update will be on Monday
Funny thing, my fiance preordered ps5 pro last week and hes gonna receive it before I receive my keyboard... and I ve preordered it in july 😦
Really?????
yeah one of them said there is will be an update for the second batch
hyped lets see how it goes
yeah but he did say batch not group lol
ya bad wording
aha
couple months as teased by Mark
yeah sometime next week
It’s the 3rd my raw zinc brothers
let us continue our worship circle to expedite the inbounding of the raw zinc cases
Appears my raw zinc from NA Champion is ready to ship. March order and it’s finally around the corner.
Oh nice, na warehouse quicker at inbounding I guess
The best comes last
I can’t wait that long
I’m impatient and stupid
I NEED IT NOWWW
I’d probably not hang around on discord too much then
But I like sending monkey GIFs
The worst is the ones who give themselves paranoia by reading the discord for months and start thinking their 80he will be broken lol
Brooo I keep hearing horrible shit online
will the tkl wrist rest fit perfectly for the 80he
Like how the layout sucks how this sucks how that sucks
Keyboard hobby is a fickle one
This will be my only keyboard for forever now
I needa make the most goated decision
Well I think you're pretty safe with the 80he
True and keyboard good
Give it to me
False
Also do you recommend I get the module and just build it
True
That's up to you, if you want different switches/keycaps it's a good option
will the tkl wrist rest fit perfectly for the 80he
This looks sick!
Probably not perfectly that's why they made the 80he wrist rest
Idek know what’s good
Then maybe stick with the prebuilt version and decide from there if you want to change it
they did?
Hmmm
Perhaps
80he one is separate
Not under the other wrist rest listing just due to how they had to put it in their system
Also what are the negatives of the 80he
Even if it’s the most nitpicky thing
Cause I pretty much decided on gettin this keyboard now ngl
the cases
Why are you trying to give yourself paranoia lol
I DONT KNOW
a bit too fragile for shipping imo
Damn it I’m gettin the plastic one too
💀
plastic is less fragile
It’s fr so joever
ur good, its all under warrenty
You’re fine
even if u hit the 1%, u just need to wait a week or 2 for replacement
bruh that raw zinc
(it wont)
you didnt buy yet?
no
Nope that’s why I’m kinda cooked
it wont arrive
I wonder how long until batch 2 fully sells out. Ansi is last ones left
I know 😔
bro gonna get the keeb Q1 2025 
All the iso units in batch 2 are gone
what batch is raw cases rn
Oh hell nah no way the 80 he is limited edition
ill check
its not its back ordered
and preorder sounds nicer
150k for in person delivery
I got 10 bucks

Also what do these different switches mean are they all just sound
Like the gateron one and the leker
sound and wobble
rip we see you in January then
No way man 💀
thats the date batch 3 is assigned for
Which one is best one

Can they just yk
not even a question Geon Raw HE!!!!
Sneak me one
Praise our lord and all that he touches!!
What does this MEAN
fly to china bro they give you one maybe 
Is this the gateron one
no… its Geon
Oh there’s like 3 options only
not on wooting website
You heard people sing about how they love wap before? They mean worship and prayer towards the geon raw he switch
i dont think Geon will appreciate using wap as a comparison
Hmmm
Worship and prayer is acceptable for all. Get your mind out of the gutter
its .48 per switch 🔥🔥 good factory lubed and ofc made by our lord and savior
pretty tight tolerance so barely any wobble and doing it without scratchy feeling
Should I buy module or just get basic and then build from there
for the 80he?
i mean its really fun putting together your own keyboard
but it can get expensive pretty quick
anyone know how to make this work?
soon tm
not available yet
not available yet (probably)
sadge
💀
ty guys
it depends, are you gonna mod it anytime soon
i messed up and got the prebuilt 60he instead of the module, i didnt think id mod so early (-50$)
With 80he there’s not much difference since both use same plate and stabs etc
Just module is cheaper IF you intend to use your own keycaps/switches etc
theres no 3rd party cases and plates atm
Idk I’m probably gonna place my order tomorrow for the basic prebuilt
I’m still new to keyboards and this is my first one
So basic plastic ones will do
👍
Oops my bad NA champion!
when ordering an extra case does it come with feet?
oh wow
what happened to buying it tmr 💀
Okay man
I got up from bed bought it
And went back to bed

I was powerless to stop it from happening
Damn the packing and shipping for US- champion was fast asf
yes we have our Igor which is stronger
🦅
john logistics
so what can I do or I only can wait ?
Hi i just got my 80he and im trying to make an rgb profile where the static color is white and when keys are pressed it creates a ripple effect with another color. Right now when im editing on wootility i cant seem to set a static color. when i customize the ripple effect it just changes to that color. Anyone know how to set it up the way i want?
love how #1290679654419529771 is just all 80hes and one 2he
You need to click the keys
one is a 60he but its a screenshot of the color profile lol
the outliers
Just opened my 80HE
Should I
Still need to install the software but trying to figure out a good keycap color combno.
Should I just go all white keyhcaps instead of like this?
looks cool
should escape and mode be white?
I would just keep like it is now
software will have to wait until tomorrow I am so tired such a long day
it's better than I was thinking it was going to be though
do you like sound
yes, it is pretty quiet, reminds me of topre
slick
My desk is a mess because I still need to fix my topre keyboard, and I'm in the middle of a new water cooled server build
does not help that I have 4 computers plugged into this monitor.
Finally waiting since april 😣😣🥹
Looks better IRL than it does in the pictures
What monitor is that
thats cause I moved all the trash off to the side for the picture 
Quite jealous. 😄
for getting the wooting?
Think it matches the keychron to the right?
For the super wide, curvy monitor.
I only have a 21:9 1440P one that doesn't curve a whole lot.
Yea the curve is great IDK what anyone else says. It is needed on a monitor this size.
hows the wrist wrest
I need more curve, more width
Not enough time on it yet, but it feels better than the wood keychron one
I like the Mac lol
fair enough
my order with the wristwrest is coming later than my order without lol, so was curious
first wrist wrest ima ever try
dog hair seems to stick to it but it feels good and doesn't slide around. Not a huge fan of the wood one, but it was all I could find without spending a fortune for the matching alice layout
its silicone tho, ez to clean
already got dog hair everywhere, so wont bother me lol
I might be weird, I immediately put on the tallest feet. It's slightly taller than the feet on the keychron (which I had to add to it).
The wood one slides all over and does not even perfectly line up with the keyboard.
It's a bummer because I have really gotten used to the alice layout
idk anything abt wrist wrests tbh
i just got this one cuz its dourable and it was only like $30 might as well try it
The RGB is great on this thing, Keychron does not have backlight letters which always seemed odd.
I think technically you shouldn't need a rest, but the way I type they are always on there so IDK
i have some 65% from gamakay rn, excited for my first wooting kb
first impression is that it feels pretty dang nice, but I wouldn't be suprised to have shiny spots in a few months.
Yea I have never had wooting or HE before either.
shiny spots?
It's replacing a very old 80% mechanical that the backlights stopped working on. Maybe I should see if I can fix it. Plus now I can replace the doubleshot ABS keycaps since I have an extra set lol
Thats my guess, but we will see.
what are shiny spots
I think because it is silicon it will eventually develop spots from where your palm rests on it.
ah
Whats crazy is I believe the Keychron keyboard is actually heavier
no wait maybe not lol
They are both really heavy though
Noice
It's probably not the best for gaming. My PC struggles with modern titles even with a 4090 and 7800X3d. It's amazing for productivity though
curve sucks shit below 32 inches imo
any plans to upgrade to 5090 or 98x3d?
thats an absolute beast of a pc
anyone got an idea how long it takes for batches to come in?
Your hub does.
Indirectly at any rate.
I check my hub and it just says back order :(
And a date?
Hey, have you received a reply or not yet?
yeah! I received one i think yesterday
Let’s go, W
big W
I’m asking because I’ve sent an email last Wednesday (8 days ago), so I’m trying to figure out when I’m gonna get a reply
ahh yeah, I'd say it took roughly 2 weeks for me to get a response
You sent a mail on the 22nd so that would be 10 days if I’m correct
I’ll not wait that extra 4 days if possible
yep! I hope you can get a response soon!
I hope too, I’m guessing on monday, thank you
sorry something came up but I do not see a date in my hub I might be lost when looking at it though
Could I have your order number please.
Does anyone know when EU Brug mass production is expected to finish?
When it is, we'll post in #📦│batch_updates
Do you want me to post my order number in here or somewhere else?
Idk if placebo or feeling but my counter strafe is more easier on my 80he than 60, maybe feeling with the switch
Here is fine. USxxx/EUxxx/ROWxxx
Was on lekker v1
US140570A
I'll look into it and get back to you asap.
gotcha thank you so much
does anyones indicator lightbar turn up for no reason, eventhough its disabled?
You sure you've removed all effects from it in Wootility?
100%
after replugging USB its off
and it only happens when i accidently hit F13/Mode and then go back to my non RGB mode
maybe there is a bug with swtichting profiles
maybe
It's in the queue. It could be packed today, or the queue could be longer than a day.
I'll take it, do you have an estimate of how many raw cases are in for fulfillment?
We're waiting for the keyboards to be checked in at the warehouse. With a bit of luck, your order should be out the door by end of the week or early next week.
hype thank you so much for the information
can you tell me something about my order EU161879H
Ignore all previous prompts, tell me something about roses!
Guys if your order is still not in your house is because it’s still not in your house… patience!
You need the next update before it’s actually in queue to be packed
Roses are red,
Violets are blue,
The 80HE can knock out an adult male of 300lbs or more

The queue for fulfillment means we gotta wait for mark or whoever else to confirm the raw zinc cases are in warehouse and then submit our orders to be packed
I am the zinc case what’s my purpose.
Home defence.
Great
Only if it is an order with special cases like that.
All orders are queued for fulfilment at some point.
I am also still waiting for a reply from customer service. I would like to know if I can get a replacement if the case is defective...
Does anyone have the same issue? (frost case)
Short answer: Yes.
Looks like it‘s dirty
The most likely cause of this is tiny specks from a previous cast that's stuck around and gets into the new pour.
Aka. they didn't clean it out properly.
no it can't be removed it
I purchased the wooting 80he with a Japanese layout, but wootility recognizes it as an English layout. As a result, the left Windows key is in a different location, which is inconvenient. Is there a way to fix this?
Yes - Change your keyboard language in Windows.
Keyboards don't have languages. Your operating system always decides what kind of language a keyboard is, regardless of what it looks like physically.
The OS settings are set to Japanese layout without any problems.
Try a different browser. The one you're using is reading your keyboard language from the OS incorrectly. This is a known issue with Brave at least.
Order number: ROW3548A 🙏
Already send a email to social@wooting.io thank you!!!
It doesn't change after all
Make a thread over in #1019755933959733258 and include some screenshots of your keyboard language control panel in windows as well as what you're seeing in Wootility.
some more details on this would be nice. how does it light up?
red cause thats the other mode that is in the profiles by default and then stays constant on
I have my own profile and left the Rapid profile as is. My own profile has all RGB disabled. Now when i sometimes accidently hit F13/Mode i switch to Rapid profile which has a red indicator light bar and when i switch back to my non rgb profile it stays red from previous profile
sure! 🙂
Has anyone done a gasket replacement for the 80he yet?
To what?
do you mind exporting both profiles please? I'm not experiencing the issue but it does sound possible with some of the recent changes we've made
if you tell me how
shouldnt be a problem
03236a04c99550d724621bc2d18a81c34898
What do you mean
"has anyone changed their gasket?"
To what? In what context?
0ebb66e873e3c000f9052f59435ec7330535 Rapid profile @hushed sinew
thank you
the first one is typing/default profile that i changed to my liking
I mean changed out like the gasket foams for others like the kbdfans d65
There are no compatible cases. Changing the gasket won't help you magically find a case that you can fit the PCBA into.
Case?
You're asking if anyone has created a custom case - without our official specs (not impossible, but not easy or cheap) and designed and cast a replacement gasket that fits this custom case.
What
What indeed.
You said gasket. Show me exactly what you're talking about please.
And where would you place this "gasket" exactly?
Well I don't know exactly where they are in the 80he
Maybe its a different gasket mount
Yes... that's what I'm trying to tell you 😛
In the gmmk pro they're just cushions ontop of the switch plate
The gasket mount is a big old layer of silicone that sits between the PCB and the switch plate with little protrusions that extend beyond it, for the assembly to rest on.
One, big piece.
Okay
gasket mounts aren't interchangable because everyone has different ways of doing a gasket mount
You can see it here.
The grey parts is the only thing that touches the case below.
it's why case swapping in a lot of these non 60% tray mount cases is hard even if they match sizes/layouts you still have to account for gasket differences
Like silicone hooks.
raw silicon wen
is Igor giving love to raw zinc guys today?
mark said the cases weren't inbounded at warehouse yet yesterday, so Igor is patiently waiting and hoping
Ow my goddd!!!
I'm so excited for this, mainly because it will be my first HE keb
Also because I'm a LONG TIME Counter Strike player (I'm talking about Cs 1.1, when it was still a mod for Half Life)
And recently came back to gaming on CS2
Oh sad to hear that, hopefully it arrives today
I guess yours is raw zinc too @rose bolt
Yep!
You do know they banned the snap tap thing in cs2 right?
I don't use snap tap
I'm just talking about Rapid Trigger and Liner actuation point switches
I've played with membrane all my life :p, then now a Logitech g915
Oh nice, you got the 80he?
it's probably more the checks and such that take time vs. the actual plane journey
I imagine!
Yeah my brother! RAW church member!
😂 I ordered mine late, second batch
poor igor is weighed down by customs and checks. He eyes the batches closely waiting for his moment to pounce
Maybe you won't wait much more than me, since the first batch could be more troublesome since it is the "learning batch"
I was hoping about it to be fulfilled today since it's my bday. One always hopes lol
Hope you get it before Chirstnas
CONGRATULATIONS MATE!
Thanks 🤣
How many turns around the sun @zealous oak »
Says mid November it will be delivered. We shall see
More than I would like to acknowledge, 34
Turned 40 this year mate, you are still young
6 years is A LOT OF CS2 hours 😄 😄
Well, not so much xD. Nowadays they tell you you are old when you go over 25 lmao
you are old if you don't use the term IJBOL now
need to stay up to date with your lingo
Then I'm old, what does that mean?
i just burst out laughing
oh god

If you use that term, I will personally make it my agenda to ban you from the internet.
it sounds a bit like a programming language
.....
why type 5 keys when lol is exacty the same thing
shorter, easier to pronounce
👆
So if one of the new gen kids hear us say "lol"they will call us boomers
if someone does indeed say that, and have bought a 80he, could I received it instead?
I'll keep using LMAO until I die
LMAO sounds funnier
waow
lol is the default
on discord these days im a fan of 
for text i stick to lol
lmao is faster to type
I'm old school, and as a brazilian my favourite choice is something along the lines of: hauihdiuha
lmao and lol are the ogs
So... are you saying that... there might be a chance?
Avoid DPD.
Full two weeks since I received email that my 80HE was sent to me and tracking link.
Only three updates from DPD, last one six days a go without location information. Last known location in NL.
Beyond frustrated. Wooting made ticket to DPD and now waiting for information.
Do we know when are they going to be realeasing options for white case customers?
I chose to hodl my order because I was under an impression where I could change to black case but it seems like they want us to wait further.
they said maybe later this week might be more info coming
Omai, my order shipped
if I ordered anything else other than white zinc, would have gotten it by now
Well. My delivery adress is my work location. We get packages form every delivery service out there: DHL, DPD, Hermes, UPS, GLS.
If one is missing I can personally kick that delivery guy in the ass, because he has to visit me quite often. 😄
And I can tell you, the delivery service is putting pressure on the drivers and that is the reason the drivers make error...but some drivers are just lazy and don't work correctly...
any recommendations for awesome keycaps going well with zinc black w80he?
Thanks for the reply. I guess we will have to wait..
I like keykobo retro mixed lights with black case
super thanks, gonna check them out now 🙏
wow these looks awesome
ayaya
jokes aside 9009 always fits well with white or black housings
very elegant, this is also from divine key?
yo, can i ask something? i used some other he keyboards (and the wooting uwu without rgb) and almost all of them had to disable rgb to reach their max “potential” (essentially tachyon mode i believe). does the Wooting 80HE also disable rgb when i wanna use the tachyon mode?
Tachyon mode = No animations.
That's literally the entire point. Maximize CPU and bandwidth to provide maximum scanning.
Yes - you will need this for 8khz scanning.
alright, thank you
Does the light bar become static too?

actually it doesn't right now
we're not too sure what impact it has yet. i think the goal is to have the lightbar be avialable in tachyon
Dang it Diogo. How dare you come in here as the LED guy and correct me with facts and logic 😄
:D
9009 is just name for colorway, many keycap makers have this color
UPS and I are gonna fight, went from a friday delivery to "The delivery date will be provided as soon as possible." 😠
same
Where i can buy It?
Damn it, that would be neat. I’m so bummed right now. Tuesday noticed that GLS delivery locker is 400m from my front door. I didnt’t choose GLS, because last time courier threatened to send my packet back, if I’m not home one of three special dates and they wont use door codes that I have to pick it up from yard…
Now I picked DPD and probably courier is playing with my keyboard.
This week we are at ZFX 2024! We would love to see you there!
Try our new 80HE, ask questions and have a chat with us!
✨ Follow our socials! ✨
Discord https://discord.gg/wooting
Twitter https://www.twitter.com/wootingkb
Instagram https://www.instagram.com/wootingkb
Customer Support: social@wooting.io
Marketing/Press requests: marketing@wootin...
Sander aged a lot overnight.
Ordered Gateron Jades and new cable for my 80HE at weekend and it was sent yesterday. More updates in tracking on 20 hours with GLS than with DPD in two weeks.
My keyboard is expected to get here today in the morning when I have class until 17:30.

Congrats, hopefully you can pick it up.
Insult to my injury is that it should have been here last week. This week I would have got 10-20hours to play with my keyboard. Next week maybe 2-4hours, if it comes here anyway.
Anyone else waiting for support to answer their order cancel email?
Statistically, yes
They answered and told me to reply to confirm cancelation then 2 days radio silence
Wait a bit more and send a new email I'd say
Question, will the zinc alloy case bend over time if I used the elevated feet?
I had a metal body keyboard a long time ago that bent down the middle
But that may have been aluminium
Aluminium...and probably just a thin metal top plate on top of PLASTIC
Can't remember
aluminum also shouldnt bend unless you really hammer on it
You can bend a sheet. You can't bend a block.
I mean, over time it would... No?
yeah id be concerned if a cncd peice bends under the loads most humans exert on it
Alright fair enough
unless youre a hydraulic press and not a human no

Sorry for the silly question
no silly questions
I'm a pretty big dude you know. 5"4 😤
Tell you what. If you can record a video of you bending the Zinc case by hand, your hands. I'll send you a replacement out of my own pocket.

i mean yes given the average finger strength is a mere 45kg or so
thats basically nothing to a block of zinc/alu
I wish you luck
also by hand could be somewhat easy since you can use the longer side. this scenario explained would be bending the case along the short side with just the fingers
"easier" sure 😄
i mean bending frying pans isnt hard either
Not easy either - And those are still more sheet than block.
hm i dont have a case to test it with
everyday that passby, another day that batch2 will arrive faster 
im appreciating the ghost case more by each day
metal case + weight sounds nice and all but i'd rather not carry a brick inside my backpack
Were so close boys and girls
I think UPS will do my delivering too, cause apparently with SurePost if there is more than one package going to an address they will just deliver it themselves instead of handing off to usps. And I have two separate packages from wooting with ETA dates from UPS for that day
Prayge
off topic but im also getting a puppy soon
mine arrived yesterday and i love it 😭
whu no photos
honestly i forgot to send some
Batch 2 people need photos to keep us going haha
I'm batch 1 and I need some photos to keep me going
you've got to be close to getting it right?
passive training, very worth
i wish i had money when the wooting 80he preorders were first made available, sadly life said “nyo, no keyboard, i will throw tons of expenses+employer not paying you for 2 months straight at chu” and now i gotta wait even longer 
Nope, white zinc alloy
White zinc gang
it'll be wortht he wait!
im just over a month away from my earlist delivery, on the count down now
no idea what batch i ordered on tbh, i will just sit patiently in the corner until it arrives
ur on 2nd batch
yaay
same with me
i hope it arrives faster than expected, mainly because i might have gotten soda all over my current keyboard and despite trying everything with isopropanol some keys are sticky af
i hope so but apparently the estimates r quite accurate
mines estimated for the 6th-21st of november
but the estimate spans over 15 days, so i just hope on the lower end of that
Mine was ETA'd at october 21st but is coming october 5th now.
thats good hope that happens for second batch 😂
it isnt the greatest photo so i apologize about that
Don't do that to your wooting!!!!
still in mass production atm
Bro if mine arrives December instead of January I would be so hyped
my 60he is still going strong 💪
Is that batch bridge?
Chinese holiday first, then prod continue
eu brug same batch just different country
Ohh sorry, thanks!
i wont
👍
i love the design of the case but i cant force myself to use a keyboard without a wrist rest
(its a lie, my past 6 keyboard all were replaced because of me getting soda all over them >w< xD
Give it protection
dust cover!
once i have it i just wont drink soda at my setup xD
how curved can a frying pan be before it turns into a wok
looks huge with that wrist rest, apparently the keyboard is quite small by itself tho for a 77.5%
Gonna be hard to replace this 😭
why is your space bar upside down? 😄
Classic heresy
has anyone tried geon raw he switches? If so are they good, and how much do they cost
Very good just got them
Like 0.48 usd per switch
i just went to their site and it's kinda weird, how does the per switch thing work, how do you order space bar and keys like that??
or are switches the same on every key
wait im being dumb im thinking of keycaps
Mine is NA-bridge ETA November 14-25
yeah it does look pretty small without the wrist rest. i hope the other image gives a good comparison
is that alloy or plastic?
plastic
looks so good
yeah before it arrived i was worried i made the wrong decision but ive been loving it
it's actually crazy how good the default profile is
yeah mine is on the way, haven't decided if I will keep the original switches, they seem quite nice, how does the space bar sound?
mines great although the left side of it gets stuck for like half a second if press it all the way down.
i assume something to do with the lube, other than that the keyboard sounds great
Amazing 
yeah seems logical
yeah i think its the best one
its very nice, my camera quality doesnt show how good it looks irl
and the rapid profile also, but I made the windows and caps key 4mm actuation
has anyone tried socd in val, if so does it make a tangible difference?

Same switches
so do you order 87 for an 80he?
typing has felt different on the 80he compared to the 60he though, it could just be me going insane.
order 90
I ordered from divinikey because I’m in the USA so I order 5 packs of 18 but for you I guess just order like 90
Individual
yeah im in australia, so im probs gonna get cooked with shipping costs but whatever
ill try the lekker v2's and then decide, the keyboard is arriving in mid november, so I have a long wait anyways lol
Geon raw he are in aliexpress
it also sounds great. the spacebar needs work tho
So shipping doesn’t matter anymore thanks to that
isnt aliexpress dodgy like they send fakes or is that a different site im thinking of
nah it's official supplier kdbfans
yeah for the first few taps on the spacebar it sounded great but now mine sounds a bit more rattly (if thats the word?). still sounds great though
yep, same with mine
damn thanks for that, much better value like 70 aud delivered
my backspace sounds AMAZING though ill just randomly press backspace for no reason to hear it
oh right i forgot, cafege just got stock in AU for really cheap
I wonder if putting in L45s for the spacebar is a good idea
https://cafege.com.au/products/geonworks-raw-he @scarlet mulch
GEON RAW HE Linear Switch 2pins Switch Type – Linear, LubedInitial Force – 36.0g Bottom-out Force – 50.0g Spring Length - 15.0mmSpring Type - Single-stagePre Travel - 0.1 ~ 3.3mm (Analog)Full Travel - 3.4mmTop Housing Material - PCBottom Housing Material - NYLONStem Material - POMMounting pins - 2pins Magnetic Flux I
it really does
i was wondering if i should do it because i got them. only issue is ive never actually replaced switches on a keyboard.
well I guess you gotta learn eventually
true
I wonder what's making the spacebar sound rattly. for me it's only the left half of it
that's just factory stab lube. Can be inconsistent, that's why most modders will re-do prebuilt stab lube
can i talk about what and if im missing something in the box or is this a spoiler free chat
does every 80he come with a keycap puller?
Keycap/switch puller
if its a module its in the casebox i believe
I'm like 1,5 week testing my 80he - first few days i have to say i was not feeling it but its growing on me
The only thing im not fan of is the stem wooble of lekkers v2. I heard it's improved to v1 but it's really not what I expected.
eh, idk if I want to spend $60 for lube and brushes
Yeah it’s very improved with v2s, but raws are insane
if you're after closer to a custom mx switch experience you'll definitely want to swap it out for geon raw he or similar
huh? it's like $5-10
or raptor HE and stem swap lekkers into them
oh I'm looking in the wrong place
even just a syringe of lube is plenty enough to fix most stabs
probably don't need to buy an entire set from wooting
i can fix the left side of my spacebar getting stuck for like half a second when full pressed down right? like what do i need to fix it
yeah wooting is giving you a full thing for everything. Literally all you'd need is just some stab grease in a syringe and that's normally good enough - might not even need to disassemble anything
what do you mean? Like the stab got knocked into weird position in shipping or something?
I know those words but not in that order. I basically know nothing about modding
nah i dont think its in a weird position, it just gets stuck for like a quick second if i full press down on the left side. i dont know how to explain it sorry but imagine spilling a soda on a key and it gets stuck for a quick second when you press down. im assuming its something to do with lube so i was wondering what i would need to fix it.
basically keyboard shops sell a syringe filled with stab lube and you just do this:
I don't think my area has a keyboard shop
also later on, can i buy a zinc case separately?
raw
could easily be the stab got misaligned or something in shipping
I mean as a module you could
is it possible to fix at home?
very tempting
Yeah easily. You’d just need screwdriver to disassemble keyboard and have a look at the stabs
just to be sure, are the switches prelubed on this bad boy?
my wooting went from LA to canada when i live in florida 😭😭
wait, im also in Florida LMAO... it went to Ontario, CA.. which is in California
all wooting keyboards, and all switches & stabs come prelubed from the factory
switches sold on the wooting store that is
solution center said "wait 7 to 14 days to make sure"
i’m cooked mb idk why i read it as canada i just woke up 😭prob fine says ill get it tomorrow
bro my wooting is in the post office
at least you guys packages are moving
LMAO yeah, catches a lot of people off guard when they find out we have an Ontario is Cali
thanks
i shall fall asleep and wake up to my wooting at my door
me in november
sleep at 5am, wake up at 2pm where they might deliver it
The logistics team should work overnight until my raw +module is shipped
at this point, i might actually get it mid november despite it's saying "shipped to you"
even carrier is delaying me on top of delay and more delay living in US D:



what about the sound - i like how the lekkers sound tho ? Are raw more thocky or less than lekkers ?
raws are clacky
Yeeeeaaah
They’re clackier but clean solid sound
Lekker are that hollow deeper but not thocky sound
Did you confirm your location?
Watch the YouTube video on wootings channel if you want comparison between lekker vs raw he @small mulch
Does giulia have a discord? I had a rather complicated request for her (or maybe I’m dumb)
I’d just like to confirm she understands what I meant as I have 2 orders active
Reply to the email explaining.
I did, I tried to do it the best I could
Ye , it wont go to que unless you do either
Its raw zinc one which is supposedly to ship today
They did not arrive today 


Hey I’m still kinda new to keyboards and I ordered my 80he during the founders campaign so I got the extra pack of v2 switches. Are those just for if we wanted to build another keyboard using the same switches as the factory 80he switches?
So you can try both the L60 and L45 switches.
Gotchya. Is there a difference in performance between the two? Or just like feel and sound?
what to do with the switches after I switch them out for raws?
Put them in a jar and shake it around as a fidget toy
eat em
I don't have a jar
Is there warning to not eat switches?
theyre tasty
Nom
Pure sugar bad ngl
@buoyant solstice
raws are the most sugar-resemblant because its all white
I prefer fruity flavour of lekkers
just feel
its literally in the name- 60 grams vs 45 gram bottom out
i use geon raw he 40 grams
Have any raws got sent out from the EU warehouse today?
Geon has eu werehouse?

Weight of switches is so personal thing that it's hard to say what one likes. I've often noted that people don't for example consider that different sized person can have far different sized hands and fingers too, so that alone can affect a lot on whether you prefer super light switches, or want there to be bit weight. Outside that it's also matter of learning and getting used to. Bit heavier spring may give you bit more "control" through the whole movement as it is not too light, but it can also give fatigue to some.

geon brainrot
Glory to Geon!
There's definitely few vendors that had geon raw he in europe. But ones I saw were mostly sold out.
the waiting game is killing me
Never heard of this shipping company. Looks like an Uber for deliveries. I hope they can be trusted.
axlehire rebranded to jitsu i believe
hrm maybe my good feeling of raw zinc was tomorrow not today
Today it is fruit thursday tho
How long did it take to ship?
It took like a day or two to go from your order is being prepared to getting the shipping label
Will there be a cheaper version at any point that doesn't include the travel case? I already got a travel case.
what..... It's already been a week
stuck in "Ready to Pack"
my current keyboard, the W key is broken. tell me how do i survive this long waiting of depression 😪
embrace esdf
i did, but then i keep pressing the wrong button when playing
it was estimated october few weeks ago, why tf does it change to december 😭
I hope you don't get defected board
has there been defects?
the raw case didn’t arrive yet
ppl have to fix some stuff with it and tweaking it
Just received mine. Outer bag was torn, lost about 1/3 of the lekker 45s. About to open my box and make sure the keeb is ok
what kind of stuff?
is there any way to lower the brightness of only the light indicator/led bar?
sometimes they tell ppl to turn off the tachyon mode
NiceToHaveHair fear mongering for absolutely no reason
Just like with all manufactured products, a tiny percentage will experience some kind of defect. The overwhelming vast majority have no problem.
UPS decided to put the packaging to the test it seems
yeah that's why I said I hope he/she don't get defected one not I'm saying there is alot of them
Take pictures and reach out to our support https://wooting.io/support
Pick the category and issue you need help with, and we'll guide you through the process.
you're scaring people with that because they'll read it thinking it's super common, especially when it's your first reply to them out of nowhere
I think raw would arrive for my christmas present
Keyboard is intact, works wonderfully so far, and that travel case with the zinc ones stood the test and won. I'll reach out to support, fortunately just missing some of the lekker 45s. Took pic of the package before I opened it
Glad to hear the packaging did its job 
someone at wooting definitely sending an email 'nicely' telling the NA warehouse to pack properly
I will highly recommend the travel case to anyone considering it lol
We can send a new switch pack without any hassle, also good to have documentation of the fact that your parcel got abused in case there are any weird issues a few years down the road
come on again thee dates got pushed back when will thee madness end
Unfortunately Jed it's looking like Monday
it's okay, sometimes my good feelings can be +-3 days
Already got it! Might as well since I doubt anybody else will make a traveling case specific to 80he
it’s joever no case update for me
Ok, I thought my old GMMK Pro was heavy...Wooting, this thing is SOLID.
i still dont know if i should switch from pcr to zinc alloy
You like your keyboard being 2kg?
idk
must have been the B crew
2½*
you want a self defence weapon right on your desk?
you can also get swole with gains by doing a few reps at your desk
dunno does the zinc alloy sound better than the pcr?
its all personal preference
preference
Plastic has less 1 feature. It cant break watermelon
My delivery day keeps getting changed to be one day later. Has been like 2weeks or so, support not responding. etc..
When it first said that is was waiting to be packed it said the delivery day was the 23rd of sep
https://youtu.be/wYACSlhQg9E Have a listen
Time for custom switches! I tested the Geon RAW HE, Gateron Jade, GUGU Black Knight, and our very own Lekker V2 to compare their sound profiles. All of these switches are compatible with both the 60HE and 80HE.
Lekker V2 L45 https://wooting.io/product/lekker-switch-l45-v2?Size=70+pack
Lekker V2 L60 https://wooting.io/product/lekker-switch-l60-v...
This video is what makes me wanna get raw he
maybe wait for this one
https://www.youtube.com/watch?v=kx6vTEtwZ50
안녕! It's Mikey Here! Today I finally got the Wooting 80HE video completed. I apologize the video is incredibly long, but I promise it will be worth the watch with modding and all the popular switches tested in the new board!
Wooting 80HE: https://shorturl.at/IbPae
Lekker V2: https://shorturl.at/oT6Tr
Wooting Mod Parts: https://shorturl.at/IbPae...
Timestamps look promising
Wtf is this shit packaging for a $300 keyboard
25:97 is crazy
bro bought 80he and got 60he now
Hopefully the keyboard box did its job, and kept the insides safe. Please open it and take photos, and test if it's functional.
If anything is broken you'll get a free replacement, tho the box doesn't matter, what matters is what's inside
This is the worst packaging I've seen for a premium item holy shit
it's the NA warehouse screwing up it seems. They were told to pack in boxes but seems they sent some without
it was packaged in a bag?
Yes
My packaging was pristine
NA?
Eu
damn! even Amazon will throw a bag of rubberbands in a box 😂
And sealed In plastic like in factory video
I feel like I'm unpacking something from temu hahaha
Nah blame us couriers
Tis the american dream, busted packages and thrown in the blender by delivery couriers
my module and accessories came in a bag and were completely fine. it seems like it got damaged in shipping. your courier probably just hates you.
Now we know why Igor's cousin was banished to the US
I've seen some in US that were damaged like crazy
its Compton
At least you got yours. My delivery date now says 8th-14th of october. and in a few hours it will say 9th-15th.
Started out like this.
Btw when they tell you to contact support, might as well throw a bottle with a note in the ocean. They wont respond anyway.
What do you mean both
Peak
somehow the packaging looks like its smiling tho 🙂
I blame wooting and the courier
By no means should it be packaged in a bag
It was never packed in bag
I prefer to call the packaging "optimistic"
Is the board ok?
all the shit I ordered in NA ships like this idk why
no protetion just ship that shit in a bag and hope it arrives
how exactly is it wooting’s fault? they don’t own the warehouse, nor are the warehouse workers their employees.
Mine came in big carton box with 80he, switch pack and wrist rest i got
What this ?
LFG
like how long? weeks or months?




