#🌟│wooting80he
1 messages · Page 175 of 1
like in discord pins? I don't see anything about the case. I am on mobile 😬
still have pins i think
I just do not see anything about the case
Then you click on Wooting 80HE on the top and the pinned messages
click the channel name on mobile, you can see the pins section there
but and here I am I have to spend another $100 on the case
don't see anything about case scratches
Look the videos
you can get 3rd party ones too
drakon and this?
or get the prebuilt which is plastic case
is that a wrist rest for the mouse?
but is there a way to take this but only change the switches from l45 v2?
thanks
Not preinstalled, but you're welcome to purchase a switch pack alongside.
If you go for a module instead of a prebuilt then you can get the switches you need without paying for the ones you don't.
top man, thank you
yes but I can't find the case
It was like this before, could it be good or not?
you need a case
but I can't find it, I can only find the $120 one but I doubt it's that
you can just get a 3rd party one
if you just want a 60he with L45, id just get the prebuilt and swap the switches
Go to the wooting configurator instead of selecting products 1 by 1
understood but then it is easier to take the basic one already made but I would like to change from normal to v2
But do you want a third party case or what?
Here the case fits both 80 he and 60 he
yes how much will it ever cost?
Depends on the case
There are multiple choices
but there is no way I can order it like this and it is already assembled at home so I can assemble it myself
You want a 60he with lekker v2 switches?
yes
but one thing, what if I order it like this and will it arrive already assembled at home?
no
No, because it's the module version
just ordered :)
You will have to assemble it by yourself
Nice, this works well for me. Let me know if you like it
but I would like to change the switch but it is not possible since it is already assembled
you can just disassemble it
@buoyant solstice is going to get angry because this is about 60he lol

Will do! I have got minor carpal tunnel and was looking for a design that I liked that also matched with the wooting wrist rest
But if you want it with lekker v2 you will have to buy them apart and assemble yourself
and who is good at assembling if I touch something it breaks
it's actually really easy to assemble
assembling or disassembling is very easy to do, and the chances of you breaking anything is very low
the problem is that I don't have the tools to assemble it
you need one ph1 screwdriver and a switch puller
Yep, that's all you need. Nothing fancy
ok if I ever think about this I'll do it and find a 60he cas
is raw he better than jade pros😭
pReFeReNce
yes
why though
(I don't know but you can't decide without an internet stranger telling you so here I am)
because of price
does anyone know where i can find some pre made profiles?
other than price is there any other advantage it provides
tyy
is the 3.4mm travel time of the geon raw he a great nice VS the lekkers' 4mm?
I think sno said jade pros/max are basically the same feel with the raw HE, they just cost more
sounds a tiny bit different I guess since they are different products
okay thank u
swapping those switches was hella tough. especially the F keys
bruv's gotta stop down that aperture

yeah 1.8 on this one heheh
Is there a way to upgrade from regular shipping to expedited?
do i have to swap stabs to accommodate the gateron jades
Depends on your keycaps
mine are not cherry profile
probably not, most keycaps are tight enough so they don't launch themselves off and weeblewobble
okay thankss
if you do, just shim the stabs with some tape or whatever and they are fine again
I can see one keycap clearly so that's something 
oh sorry
very clean
like underneath the stab?
bump :)
anyone tried low profile jade on wooting?
will that affect actuation
like in the interface between the keycap and the stab, in the cross hole -- if you dare
I dunno, that's why im asking lol I'm not sure it's even out.
OMG what keyboard?
oh i know u can get sponges for that
the problem with short-throw switches and regular ol' stabs is that the stabs travel further than the switch, so if you press spacebar on the left side and the keycap is loose, it'll tilt on the stabs
i want to know the answer too
so the only issue is w the spacebar?
so you need to shim it or space it somehow to make it not weeblewobble like that
mostly yes, as I understand it
oh then it should be fine
depends on the keycaps, you probably don't have an issue if you have normal/decent keycaps
oh boy... stabilizer need to be changed as well isn't it.. if you use low profile obviously
WHAT KEYCAPS WHAT CASE
at most ill just use a small keycap on the spacebar with no stabs
that's just the default 80he mens
so many questions, im overwhelmed
bro making me regret getting frost
This looks insane my guy i need to order this so what case? Plastic? Keycaps? Regular black?
im zinc white... still waiting
all because i wanted to pair it w girlypop keycaps
Its just your regular black zinc 80he
im swapping to hololive hyte keycap, but it's it doesn't have rgb through
"Zinc"... "default" keycaps?
so i guess background rgb is all im gonna get
Yup yup!
I contacted them via email regarding this. I essentially had to cancel and reorder with the expedited shipping. no other way it seems like
doesn't that put you behind batches
You seem like a good "photographer" what "build" for the wooting 80he would you recommend for me (please) (like case, keycaps etc) since you seem like you have an aesthetic room
if you do it now and u placed the order months ago probably
Guys i just got my 80he its my first Wooting, but i can not update it, i think im too stupid can someone maybe help me real quick ?
try that link
i think you need to use v5 wootility
actually v5.wootility.io
V4 dosent work on 80he
v5 yea
stop being wrong
He has to use v5
i tried it with v5 too, not working
what's not working
i had to do the update like 5 times xD
the update, i could join vc
try to use a generic browser like chrome
i even tried 2 pcs xD
..what about the update is not working
oh lolll
and 4 browser
Forgot to mention it to mtl_
that thing is awesome saving it
this here
theres also Gateron Jade Pro and Jade Max
ya v5 is still in alpha
do a factory reset on it
sick! probably white zinc and change the LEDS to match your room
can maybe someone hop on a call for 5 min, here on the server?
https://discord.com/channels/167181566978555904/1287781044732301447
See the steps mentioned here
my 80he was buggy as hell too until a did a factory reset and then it just works
So white keycaps, what case? Normal? Ghost? Frost?
Just get some nice white keycaps, it will look sick
frost with xrays are clean af tho
after seeing raw zinc, low key want
i do want to try raw with gmk thunder god in the future
https://kbdfans.com/products/gmk-cyl-thunder-god this with raw case
Specs Material: ABS material Profile: Cherry profile Production Method: Double-shot, Most of the novelties are UV-print. Manufacturer: GMK Friendly Reminder: Only base keycaps included, no keyboard Compatibility: Cherry MX switches and MX-style clones Keycaps set designer: HungHingDaiLo IC form IC Form Update To be upd

I would argue Striker is the best keycaps for Silver
i think the raws are a bit too matte for blue
blue and really shiny metal is great
ill either get the ones above
or when a black xrays drop
In your dreams 🙂
is there a fix for the slight case wobbling?
yes 3
What does CYL mean? I am seeing this on a lot of GMK sets nowdays
yeah they decided to call cherry CYL(indrical) to differentiate from MTNU or something
imagine holy60 with Black on Transparent with Jade Maxes 
Anyone know what group for NA case orders will be a part of
Aren't all GMK keysets cherry?

no
not MTNU haha
what are they?
maybe even a transparent case lol
It’s just so pretty
only 2 matters
Its been a while since I bough keycaps lol. Could try MTNU, they look weird 🙂
Niiiice
either bend it back or email wooting for replacement
the 3rd is just adding shit under
ill have a beer too please ;)
i'm really afraid to bend a plastic case
then just email wooting
they got u
just have to wait a bit
Woah GMK MTNU Modo/Modo Light on GB right now.
https://oblotzky.industries/products/gmk-mtnu-modo-modolight
Weird question, but what does the usb cable that comes with the 80HE look like?
pretty much just a normal cable, it is braided
depends on what u got
hmm, I'll check my order
I got the metal one in white
the metallic looking number keys are sick af
is it coiled?
straight nylon woven
thanks
perfect for raw 
all these group buys making me want more caps 

My wootility profil keep reseting so enjoying
Even after saving to keyboard?
Who is this person in the thumbnail
naaaaaah bro youre banned

Mystery keyboard man
what i saw on that thumbnail lmao

Yea
And my wooting broke on my first day
when does it reset?
Im using it on my brower like each time it close and reopen
So i have to create my on profile?
you can drag and drop the profile you want to load at boot, to the topmost slot
I have no clue
oh indeed, drakons right
you need to drag the profile you want to the top left in wootility v5, under the my profiles tab
note the numbers, drag it to 1
I forgot im gonna have to get my screen recordings restocked with v5 wootility versions
Guess ill do that tomorrow 
ah yea thats a weekend task 
Cant wait for this weekend 
So nice keyboard 
Do you guys also having issue were i have to manuell pair everytime i boot my pc
nah
Is it fake?
does it frequently disconnect and reconnect as well, or just unpairs?
mine one day frequently disconnect in wooting app but now its fine i think
Yea and sometimes unpairs few times randomly on the software b
if you have any rgb controlling software open in the background, close it then see if the problem goes away
usb hubs can also interfere with wootility so best to connect the board directly to the motherboard if its not
I have 100 rgb program closet now my room is dark let wait and see if my wooting will flipbout
what
💀
bro i was flabbergasted i just said "what"
I swear LAST TIME i have decided to go with the FROST plastic case but now for the keycaps, do i go with something like the white or the black? With my setup
Yea only wooting is lighting up now
any reason wootverlay wouldnt work with 80 he or is it my computer @unborn shard
white def
you just gotta commit to something
(Keep in mind regular keycaps)
you will second guess no matter what you choose
yaya, white will be awesome
wow i got baited hard.
My dad says the black one, SOME friends said the black to, now you guys and other people say the white one
hello, is the 3.4mm travel time of the geon raw he a great nice versus the lekkers' 4mm? what does it change in the feeling?
stopped writing my essay immedaitely and opened up yt
what matters is there will be an 80HE on your table, choose anything, go with your gut
preference
do you like bottoming out?
The keyboard is ugly to me thats why i need help :)
SEND ME MONEY
flip a coin ez
Hell nah
i guess yes, I do it all the time
ya then its great
dont get it if its ugly for you :V
other he keyboards out there
Then get me a keyboard as good as wooting but that look good
in my experience the 50g raws are great for that
define "good"
I feel like my pc is rejecting the new wooting
and what about the sound versus the lekkers? I like the thock sound they produce
I say ghost one xD
The features but looks wise higround
for the 80he, its like clean short thack
i suggest making a post in #1019755933959733258
feel free to type in another language as well
imagine an empty hard plastic cup
does higround even make 75% keyboards?
LOOKS WISE - no.
and the lekkers is like soft wood
higround is basic tho
👍
Thats why i sold it ( i really liked the looks)
well you can just get wave keycaps if you want the higround look yk
is that true that the wooting 80he has the best software but not the fastest one in terms of delay/input lag?
Oh hell no..
Building a pc was not this hard compare to keyboard tbh
Good night guys.
its got the best software and most reliable performance, and basically the best latency
i mean.. thats the only notable thing about higround kbs to me :V
How did your 80HE fair in regards to factory stabilizer lubing ?
some nice looking keycaps
yes to both
its hard to spot a higround kb without their huge logo on the spacebar
a miss
you got your 80he drak?
either over or under
my space bar stabs were bone dry! We need to somehow pass the feedback
can`t wait for mine 80HE, it is been shipped on 20th of September towards me to the UK
still considering getting that custom plate drak?
i got mine today its flippin fantastic
there are tactile he switches btw :V
ass photo tho
looks pretty , what switches are you on?
photos fine
raws geon


i wanna see it with rgb on :)
not the jades???
Yea my unboxinh i broke keycaps legs cause im having hard time installing
what the difference?

slightly better wobble, cleaner but higher pitch sound
on the 80he its a clean ass thack
also somehow cheaper
cheaper cuz worse xD
nah its better
i have already got geteron jades xD
in the objective parts
?
dw its good too
are the raws the transparent ones?
just preference
yup white
havent done rgbs and profiles lmao
its 3 am lemme sleep
ye, 3.5mm a bit faster also expecially when the key has been pressed to the bottom, anyway nobody would not play at 3.5mm or 4mm full press down
@lime falcon i keep getting this do i just ingnore it cause i already tried 13times ex:
You cant update it?
i updated but it keep comming up
dont need a night light?
yeah that's just a bug
honestly there are keycaps that are only made justice with RGB off
absolutely, however we all know rgb increases game performance by at least 20%
source? trust me fr
source? my eyes
i only have rgb on because i dont want to see the white steel plate (60he)
it kills the mostly black theme i have going for it
worth upgrade 60h (not plus) to plus or 80he?
do you want f rows and dedicated arrows/home, del, page up, page down
not worth going from 60he to 60he+ unless you need screw in stabilizer support
same goes with 80he, i wouldn't upgrade unless you need / want the extra keys
I can't imagine using 60... if i didn't mind that i would've picked up 60he years ago
If you're happy with the 60 form factor, I'd probably stay put. 60HE camp vs 80HE TKL is a pretty 50/50 community it seems
thx guys, I find the 60% very nice, "cute" almost and compact, i really like it as a form
but sometimes i feel the lack of f buttons and arrow
people who love the 60% HATE a TKL size and vice versa
with practice the function layers become natural
I mean, I use Function row and nav cluster and arrow key constantly daily basis
not having that is unthinkable
i use the keyboard purely for gaming, for work and other stuffs i use a simple one
but yes, don't know if I should go for the 80
you said purely for gaming, and then also said for work
so i'm trying to convince myself that the v2 switch plus the 80% format is worth xD
which is it?
no sorry, i use the 60he for gaming. work and other stuffs i use other keyboards
even games use function and arrow key, which you still can work around, but workaround is not efficient
yep
you should think about 60 or 80 based on how much your arm can bear between keyboard and mouse.
if you already have a 60HE i dont think the 80 is worth it tbh unless you use function and arrow keys daily
this is a nice money saver answer that I like
if you absolutly need that extra space 60 gives you, then i think you should go 60
i litteraly waited like 2 years for wooting to release a tkl or equivalent size of the 60he
you can just buy the better switches, those are probably worth it
the entire keyboard, definitely not
if money is not a problem for you then there's nothing wrong to have both in your hand i guess
i hope gateron jade low profile switch works when it releases
this is less money saver answer that i like anyway

i am still very much low profile person 😦
the v2's arent relly that different from what i heard, it might be more of a waste tbh
If its within budget I say why not, but if you're not in love with the TKL size id probably stay put with 60%.
like theyre better, but if you have v1's youre not missing out
maybe try a cheap TKL to see if the size is something you're interested in
I actually wanted TKL, but 80 still does have all I need
yes i should try it, for sure I don't want to go back to full size keyboards
full size is a little much I'll agree but I found TKL is the best intermediate. even the 80he is a little smaller than most TKLs
there are plenty of keypad only options out there, so I use separate one if I do need to use them
also has a LED bar 🙂
I bought 80HE because of arrow keys which are useful while programming instead of 60HE
60 for factor out there... you will definitely going to work around with separate fn key or something
Mull it over for 1-2 months and see if you're still interested
yes I also use anotherone for programming, impossible to use the 60he
it'll probably take a bit to arrive anyway
this is a good advice
yeah... you defo need func row nav keys and arrow keys for that
atleast you have a 60HE, I had to shelve my Rog Azoth and using my Razr Huntsman and I'm so unhappy while waiting for the 80 to arrive lol
60 is only for gaming
yes and very happy with 60he xD
that for sure
you could also try getting different switches to get a different experience
as a lower cost option
new switches, new key caps, new keyboard 😄
low profile magnetic switch plz
i mean, i think i'm just overthinking and "hyped" because with the 60he i don't have any problem with switches etc, for sure adding some f buttons and arrows will make it easier tho
but I will give it a month, if i'll be still between them, I will go for the 80he
thx guys beautiful community here always useful
interesting to consider how this would work
would there be enough travel to make it worthwhile?
NuPhy Air60 HE Magnetic Switch Gaming Keyboard (DISCOUNT code: "MIGSS"):
https://nuphy.com/collections/he-keyboards/products/nuphy-air60-he-magnetic-switch-gaming-keyboard?variant=41724980822125&sca_ref=6139543.PlBoTqDyCD
NuPhy Website (DISCOUNT code: "MIGSS"):
https://nuphy.com/migss
Web Based Software
https://nuphy.io/#/keyTravel
Business ...
i just found that video too lol
I don't see low profile jade / jade pro on gateron's own website
i guess it's oem for now?
I need to know if this is compatible with wooting 80he though
Iirc, the magnet aren't on the stem so no.
Should be visible
thats bizarre the jades arent on their website
Its not there if you try to look for it on the website, but if you type in Jade Pro in google it comes up?
very strange
whats the advantage of low profile switches?
Actually interested with this rather than 80he at first, but it has no f row
Makes the keyboard thin enough to slid into your backpack
I just received and unboxed the zinc w80he and Im absolutely floored by the quality of this thing and all the additionals. God, even unboxing experience is unmatched. Best hardware I ever bought
what case color did you get
zinc black
nice!
it feels just unbelievably premium
Im excited to try the zinc out when it arrives in nov
the lowprofile jades dont work with our keyboards
Hoping the White zinc doesnt have any random chips
trust me you will be not dissapointed, this is literally the best keyboard on the market atm, nothing comes close
I get that there are artisan keyboards and such costing much more
but w80he really delivers
I got a new set of key caps on the way while I wait with great anticipation 🙂
meanwhile in batch 2.......
which one did you get?
I feel personally @ ed
GMK Lazurite
ah, nice, they look awesome
I'm all new to customisations so I guess I will be on the lookout for zinc black keycaps
This is the look i'll be going for
lazurites seem to look awesome on white
More waiting, my raw he sitting in a closet
the novelties are 
same
I think the Laz would look great on the RAW case too
woah that looks like the royal seige skin
Very noice
It does 👀
im gonna dust and clean this thing every day lol
It has a very royal blue color to it that I love and the White alternates look like porcelain marble and I love it
apparently was from a 2021 GB
very hard to get from any websites
Thank god for spare GB
Right?!
aliexpress?
They have a gold looking RAMA escape key that I cant find
Mechmarket subreddit
hmm... seems like magnet is in different place in low-profile keyboards it's probably not compatible
you can do aliexpress but those are probably clones
those people selling were in every single group buy im convinced
seems like PCB need to specifically designed around low profile magnetic keys 😦
interesting.. im gonna avoid going there before i fall into the keycap pithole again
you always find a nicer set after you place that order......
Im still tryna find this artisan escape key
Make the stem the magnet, surround with somewhat thin layer plastic, ez low profile.
Yeah im on a group buy binge, but I'll probably experiment more later
it does something weird to your brain so now you're hooked on the process of finding the next one
Or have a permanent pretravel I guess.
AI addiction in a nutshell
goes to show its the journey and not the end destination
a treacherous journey indeed.
wallets dying left and right on the path to enlightenment...
yeah its rough
these never shipped lol
So plenty of time for research
ive been eyeing some warrior mkII's for months now
I spent $210 for the entire bundle, but pretty happy since that is still cheaper than doing everything in the original GB
Fr?
my wallets been eyeing me harder tho..
Am I chasing a ghost?
yeah scamaworks was the vendor for it
and they never shipped them
wow
ramaworks exit scammed a lot of shit
I know they did some weird stuff recently
The escape key? Its an etsy plastic key
Wait you mean Wooting scam?
where people were not happy with similar things
nah not wooting, rama
it was advertised as a metal key
they have the gold plastic included with the set
I might be thinking of a different key then ig, what was the set called and I will try find the novel for you?
GMK Lazurite is the set, the RAMA x Lazurite Esc key is basically nowhere to be found
thats what im figuring too
the key is like literally never created, not on Ebay, etsy, anywhere
i'll probably find a new artisan key, apparently they were never shipped which seems likely to be the case
unfortunate bc it was cool 😦
Lazurite has a similar escape key in their base kit
I am unsure if anyone faced the same issue as me, but after cleaning my computer and plugging everything back in, everything was properly responsive except my 80HE. I tried unplugging and plugging it back in, to no effect. It did not type and the leds were off. I watched the reset keyboard video from wooting, and i found out the 80HE uses backspace and the function key to reset, not the right most keys apparently.
My issue seems to be fixed (ill restart to make sure this was only a one time thing) but does anyone perhaps have a clue as to why this happened?
regular 80HE with the coiled cable set wooting sells, plugged into a b550 aorus board.
Theres plenty out there, you'll find something. https://www.alexotos.com/keyboard-vendor-list/ is a good resource to look for things
Yeah that site is a rabbit hole for sure
seems to be mostly GMK sets
there was some really cool ones for the new cosmos GB but thats like $200 😅
Yeah i am just a gmk shill but those sites will have ither brandings also
the Laz will be my first GMK set so im excited to try them once the new board arrives
october~
Saw somebody setting their entire set of Tuzi (novelties and rama too) for only like extra 10sgd out of my budget. Not sure if he ships to Malaysia though.
I have the GMK Fox set, I don't necessarily like them, but they're not bad.
It's on my work keyboard.
any new reviews on yt?
the only thing I see is that its pretty slow to connect but the software is pre release wip so heres that, its going to get great
the ways you can customize the w80he are just mind blowing
disclaimer I have boog75 and w60he too, nothing comes close to w80he zinc
excited for me to get the v2s in
you folks are in for such a treat
cries in Huntsman
and my 80he, but i would love to fix the switch wobble on my 60he
soon my friend, soon! 🙂
Boog sounds boring
the diff between the w80he and w60he wobble is night and day, much addressed in w80he due to new lekkers I suppose
I was a little worried that the RGB might not be bright enough for the GMKs in darkness, but some of the RGB photos ive seen is fucking bonkers
I'm also using HS-20s which are VERY wobbly
even worse than the v1s imo
I was recommended raw hes earlier in the day, I may switch at some point, atm its not worth the effort lol
originally i was gonna fix the wobble and get raptors, but i ordered a 5 pin raptor by mistake and not the HE raptors
Congratulations 🥳. You’ve just made it into the GMK club. Just be careful not to become addicted 😆
Thank you 🙂
Delicious switches are made with geon raws
yes exactly these, 50g or 60g, right?
Luckily im picky on my key caps so hopefully it won't be too bad
can anyone send a link for ws dash switches for cheap
ill probably experiment later on
many people hype geon raws he into oblivion, are they really better than lekkers v2?
this light bar doodad thingy is pretty neat :3c
I have one keycap set laying around for my project
Right.. let’s us revisit this in a year
it looks like a gummy worm
Guys win key rgb not working when i enable gaming mode
its freaking awesome and the number of ways you can use it blows my mind.. for such a simple thing. very creative!
my mental estimate is 2-3 sets
Oh no he dosent know
havent found any thats made me want to buy them outside of the Laz
!remindme 1y
Can i know why?
I also actually like the 60g, somehow they feel lighter than stock 60g l1 on w60he lol
they feel just enough to my fingers
now wooting needs to make an ortholinear 40% kekw
Nice.. 👌
And one on my custom
this feels end game to me but Im fairly sure I'll get whatever wooting releases next 
See, there’s never just one GMK set 🤣
60he with 8k, wireless, and moist knob
the problem is there's not much demand for like a high quality numpad or smth
Oooh I think I found my new esc key
im curious if na times will be abit later than expected on the hub
artisan?
I was right on the money 🤣….
Ye
the detached braided cable looks sexy tho, but I get you
im not sure tho how to check its running 8ghz, I mean, I have taychon on
i like the wooting ones they are super nice
yeah they feel like some audio grade quality stuff honestly
I bought a promod cable for this, I never actually wondered if that would run at 8k
But I guess the difference would be negligible
So wooting80he user no one likes me?
My family dosent understand
Enable gaming mode and then win key rgb not working
Shop mechanical keyboard switches, from linear to tactile to clicky, at Milktooth.
berry smooth lighting i love it
Thank you!
Well, through out the history, art and artists has often been misunderstood by the common people. Consider yourself enlightened.
Is the rgb enabled in the wooting web software?
Disable gaming mode,win key rgb works
Enable gaming mode,win key rgb doesn’t work
😑
Web everything is fine
All default
Tachyon usually just dims the rgb, not disables so thats weird
Are you using the stock cable?
I do not use tachyon mode
@low token Just remember that there is a fine line between passion and addiction 😅. A keyboard for every occasion? A set of keycaps for every month of the year? I don’t know how much is too much. Only you can decide that for yourself 😉
Oh windows gaming mode?
Can i use JRX 205 G0 lube to put on the stabilizers, this is the same stuff i used for lubing my switches. Or do i need grease for the stabilizers? I saw wooting made a video where they used lube for switches and grease for the stabilizers so was wondering if you only can use grease or that this lube is also fine...
are you using the wooting cable?
It's disabling the rgb because you can no longer press the button, I assume.
I don't know why it would be doing that however
Yeah
I lock my win key
Its also called gaming mode
I don't know an actual fix for this sorry, but the alternative would be to rebind your windows key in the wooting software to something else
Rather than using game mode
What
im not sure what this game mode stuff you keep talking about is even about
Use the remap feature to change the windows keybind so it cant be pressed, rather than using windows game mode to disable it
Fn+win
Fn+win
It's the windows gamemode/gamebar I'm presuming
ok but why would you even have that still enabled
Each to their own
Always wrong touch
you need multiple profiles anyway.. one for typing and at least one for gaming. just remap the windows key in your gaming presets

okay so first bug noticed when playing chivarly 2
I keep use default settings
it freezes on wasd input, my char just keeps moving right
you certainly dont want 0.1 actuation or rapid trigger while youre typing lol
or socd even
only pulling off and inserting the cable again fixes this, wonder how to report bugs?
Are you using the cable that came with it? I heard it can solve some issues
the detached braided extra cable bought with it, so I guess its even betterr?
its actually probably just the same functionwise lol
Ok so this is really bad, unplayable even. After a while it feezes on input, heres me trying to type console command and it just freezes (forgive the cables, temporary setup as im moving things around). Im connected through usb-c and using cd726652052b0f260b5682302f08298a3af1 profile with lowered actuation and rapid trigger. Updated firmware, using the v5.wootility and braided premium cable from wooting.
Too much wooting switches mate
god dammit I just got it lol
what are we seeing here. nothing is happening
look at the console, it froze on input, the letter is repeating endlessly and my keyboard is locked
the red led indicator also shows its locked on input
only reinserting the cable unlocks the keyboard
have you tried exchanging that particular switch to check if its just the switch
oh it locks the whole thing. thats weird
it happens at random on different letters
wasd during play or when typing commands in game console
only in chivalry? or generally. or only on that profile
halo infinite as well, so far these two tested, all profiles including default typing one
im gonna leave it as it is today and drop a ticket tomorrow, fairly sure this is software thing.. I hope
idk how to do that but have you tried completely resetting the kb?
im gonna try usb 3, not usb-c
does it mean it will flash its firmware again?
because I got it updated through wootility to some new firmware
yes it will restore the keyboard to default settings and flash to newest firmware
if you do this, i’d suggest backing up the profile codes first. they’ll be wiped after a restore
thanks!
personally id just set it up from scratch in case smth happened cz of the profiles
ill also try to use it on different port than usb-c, maybe 3.0
thanks guys, appreciated
i have mine in usb c on my pc and it works. but doesnt hurt to try to see if its the ports issue
cable is c to c but theres a c to a adapter
generally doesn’t matter if you plug it into a or c in the computer

doesnt make a difference. all you need is a usb 2 port for the kb lol
interesting, reset to all settings retained the newest firmware
lemme check if that helped
ye itll flash to most current one. not to first one
switched to rapid profile, will test
🫡
if that doesnt work out post in here for help #1019755933959733258 thatll be a lot faster than waiting for cs
Ooh good question, I may need to update the SDK for 80he support and then re-post the app. I don't have an 80he right now to test it sorry :(
Will try soon

any difference between using the usbc as opposed to the usb a adapter to the mobo? (speed/connection)
Nope
im using the c cz i got no other usbc peripheral and now i got a an usb slot more :D
okay no issues so far after reset and on the default rapid profile
which makes me think its maybe taychon related
no idea
the profile that locks up the input on my keyboard is from jaeky https://www.youtube.com/watch?v=UaZuF2KRECU
Social Media: https://linktr.ee/jaeky
Wooting 80HE Code: cd726652052b0f260b5682302f08298a3af1
cd726652052b0f260b5682302f08298a3af1
try tachion then and dont use his profile
not uncommon for ppl to have issues with tachyon mode cus usb port not giving enough power
ayo wtf they delivered my package to the wrong house??
testing now yeah
ah ye i had seen the video. bro basically just explains the features
yeah fairly sure it might be my pc and usb port
well no issues with taychon on rapid, maybe reset fixed things, dunno, will try jaeky profile again later
cheers all!
Ah got it, thanks man. I can't review this until after I move this weekend but will be cool to use it as always in the video
https://www.youtube.com/watch?v=Ju4kxa8C0_c
this video compares some of the popular switches, he uses the 60he board, but i think its still a good comparison.
안녕 It's Mikey here! With the Wooting 80HE starting shipping and orders arriving lets finish up the Wooting 60 Switch Upgrades with the new Jade Pro and Black Knight and of course the Max once it arrives. My Wooting 80HE is coming in tomorrow and I will definitely be doing many videos on that! Let's do today's comparison with the Dash, Geonworks...
I’m orob gonna swap over to jades in the next few months, also considering buying a zinc case lol
I’ll buy a zinc case whenever there’s a good keycap set that is actually available and when I have money obviously…
Not sure…
Speaking of. Wheres the sleeper builds
I wanna see 80he sleeper builds
That look nice
first time I have seen a keycap set and instantly want to buy
That feeling when you find the perfect set 
until you find another perfect set
im confused are the plastic abs keyboards shipping tommorow for NA-CHAMPION?
nothing is shipping tomorrow in NA
thats when being picky comes into play
or how people end up with multiple boards
It was the best feeling imaginable until I realized I dont have money for it and by the time I do they’re for sure gonna be sold out
The colors are white black and silver (basically) almost any keycap set would match
if you frequent r/mechmarket you could probably find some of those sets
people got a WILD variety of caps
guilty as charged
Looks like a lot of the standard dolch keycap sets
but I only bought 2 of the 3 I have does that count?
Im a simple man, i see coffee related keycaps, i buy
This could be the NicePBT BoG
Finally!!!!! 🎉🎉
Have ya’ll ever felt the pain of recommending your friend decent budget keyboards and they still went for the waste of money big brand keyboard
"I'm just gonna get this logitech board again"
👉 🚪
THATS EXACTLY WHAT HAPPENED, not the again part but bro bought a $50 logitech keyboard just so it could match with his mouse 😭
Ghub is malware
it feels like 95% of gaming peripheral software is actual malware
Anti cheat is malware
Id more call them adware
I'm forced into using synapse because of my mouse and it is awful
assware you mean
I disable it on startup once dpi etc is set
and most of them dont do anything which is unfortunate
beautiful term
Vanguard literal chinese spyware im telling you!1!!!
Theyre after us just like the Temu’s and tiktoks
what if your entire PC build is made from chinese parts, do they own your computer then
Maybe…
Im having so much wooting issue 
Waited so long for it to be delivered to the wrong house 😭
Contact your local courier branch
That's the exact same issue that I have 
any keycap suggestions for the raw zinc case?
I should make a note on how I want my 80he to sound
But the crisp sound of arcade/sanwa button comes from the button itself. Not even sure if it's possible to make a keyboard sound similar.
anyone got problems with keyboard getting stuck/frozen
😭 diabolical
Any color except beige/brown should go very well with raw
Using the stock cable?
yea
any particular recommendations
No. Its such a personal choice that I can not even begin.
Any USB software running on the machine such as Logitech, Razer etc?
was just trying to mess around in apex with movement and every few superglides attempts I just get stuck with a certain movement input(left, right,forward or back) and then the rest of the kb doesnt function until i unplug and replug
To add to this, basically its a matter of finding whatever fits your fancy
I have glorious and logitech ghub
Can you try another computer or uninstall those? They are notorious for causing issues such as youre describing
I can try uninstalling them
If that doesnt solve your issue, please create a post here https://discord.com/channels/167181566978555904/1019755933959733258
Dhl still hasnt updated
Still says they are "planning"
Departure from international sorting center
No update since
planning the most efficient route takes time
"if we go this way we can avoid 3 left hand turns but if we go this way then its only 2 but the speed limit is lower..."
anyone in the US besides reviewers get their wooting 80he yet?
nope

See #📦│batch_updates
Haven't started shipping yet
"soon"
should start shipping in the US october 1st if all goes well. hopefully i get mine while i'm on vacation from work.
I caved
nice!
I wish the valiant colorway was available though
i think i may just go with classic wob keycaps
it seems to be tachyon mode, Turned it off on the 80he and haven't had my keyboard freeze up yet since. I wonder if it is a software thing?
Id still uninstall the other software and test again. Especially since you're using the stock cable plugged directly into the PC
beta firmware ?
If there is no other software left, only thing else is the cable, the USB port or the keyboard. If you have a second PC to test on that will help determine if it's the PC. Can you try another USB port elsewhere on the PC?
Are you using stock cable?
Will attempt non usbc ports, stock cable
Are you using included adapter?
from someone in na bridge is it to late to switch from plastic to zinc?
would it push me back or anything
send them an email and tell them if the change will cause a delay don't change on my order if not change it
I'm curious if these issues are due to 8k polling, same way people with lower end/w10 PCs have issues with high polling mice
Most likely not
Can you try turn the polling rate down from 8k?
Does anyone know how long support takes to reply to tickets, I've submitted a ticket through email/ community support but no luck. I know they're busy with lots of traffic
I suppose its mostly cursor updates that are an issue with polling rates on mice
Idk how it functions on a keyboard though
Hard to give an estimate, but rest assured they will get back to you
Much much less often on keyboards. Not an issue like with some mice.
Is it just on actuation or does it constantly update?
Id assume it mainly looks at actuation
Just keypress and calibration
Alright was a dumb suggestion then, wasn't really sure how polling rate worked on keyboards
Thanks 🫡
Not dumb at all. 8k keyboards aren't as mainstream as mice
Mhm
Okay I did turn off all the rgb except caps lock and the keyboard seems to be fine(not freezing up) when tachyon enabled
Your best bet is to place an order for a zinc case and have them cancel your plastic case order. The new zinc orders are still part of NA-Bridge, so no delays as of right now
Then it's likely a power issue. The USB port may not be providing enough power. Potentially due to other devices plugged in, or just lower power handling for that USB bus. There is a chart somewhere that shows the power requirements but tachyon with RGB eats it up.
hmmm thank you, does anyone else have the problem? maybe my psu is not high enough Wattage? will different ports make a difference?
--you cant change out the rubber feet (for typing angle) on the plastic 80he ?-- nvm im dumb nvm im fucking dumb
It's not usually a power supply issue honestly. If changing ports doesn't resolve the issue you can often use a cheap powered USB hubnoff Amazon
ty, any reason why the usb c port would not supply enough amperage you think?
Too many potential variables. Motherboards power quality, chip set used, number of devices running off USB, or a host of other things.
dam, the NA batch have finished their custom and my HK batch still ready to pack, dam wooting team.
i am so mad right now
not even give us an explanation about why it's not shipping.
Guys I got some foam in my 80he case, do I keep that in there when assembling or nah?
White and raw zinc are on hold
Keyboard got ruined, so finally decided on Wooting, didnt see that the pieced out 80 comes in the whale batch instead of bridge when I bought it. Ripperoni
whichever supplies more power and whichever at least does 5V 850mA
thx
aka a chipset usb 3.0 at least
they never said it‘s on hold, at least i don't know.
even 2.0 works well but it depends how much power is being shared
Yup, just wait for the official announcement
what the estimate says ?
Mid-Jan for delivery
time to slumber for ~4 months
Check the livestream
They’ve said it there
Do i need to screw the keyboard open before removing switches?
It doesnt work to remove them i think
i don't have time to watch it, and that is not an official announcement.
I mean what do you want? We’re telling you now that it’s on hold and they’ll have an announcement this week sometime after they finish looking into the white cases to ensure there’s no chip issue
And new raw zinc cases are coming in this week
She came she finally came march preorder australia yaaaay
That’s the reason these two cases are on hold
But guys do i need to screw the keyboard apart to remove switches? It feels like im going to break something
they should make an announcement not just mention it on live stream, not everyone have time to watch the stream.
There will be announcement this week. They didn’t say anything because they want to check it first and know what they’re dealing with for the white cases
Ok so i can just pull them out like this? I just wanted to try L45 too
Use a switch puller but yes you can oulp them out that way
Ok ill try 😂
you could have went to the stream copied the script and told gpt to find the info you need, would have taken 10 seconds instead of arguing over nothing here
I pulled one out 😃
I mean I get that he’s frustrated because he’s excited for his wooting but now he knows why his order hasn’t shipped yet so just have to be patient and wait
RAW cases just had a few days extension to double check some finishing stuff, not really enough to warrant an announcement. No announcement on the white cases yet but they are checking to see if there even is an issue.
Its really hard to get the switches out
Just have to rock them a little and not try and pull straight up
if youre afraid of damaging the pcb, you can always unscrew it from the plate
i did that when i was modding the 60HE and it does make pulling a lot easier
How does it look 
Keycaps?
Hey guys! Quick question. Do any of you got your keyboard thru UPS? If yes, did you get your keyboard without any problem? Cause mine was tagged as delivered even though I haven’t received my 80HE yet
Here is mine :)
i got mine with UPS everytime i got wooting stuff
May I know what country do you live in?
I got similar one with the wooting white keycaps
Canada
Has anyone tried the zinc back plate with the frosted white top and white keycaps?
i managed to switch out those 4 switches but it took a while, is it easier if i screw out the whole thing?
Damn. Good for you for not having any problems with the shipping at all 
maybe diamondlobby?
yeah, shipping is usually pretty ok here
wbu what country?
Philippines. Its my first experience with UPS so I don’t really have any idea how to get my inquiries through them fast. I tried contacting their support but no answers yet
they take me 3 days ish
Yeah. The supposed delivery date was today (Tuesday my time) but when I tracked it earlier today, it was already delivered yesterday (Monday) but I didn’t received any
Hey everyone! Im considering getting the cerakey keycaps, does anyone know which lekker switch would be best for ceramic? L45 or L60 v2? 🙂
can anyone take a pic of the back of the zinc board
60 should do it for the most part except the spacebar, that one youd have to spring swap to a heavier spring i believe
it shows the serial number so i wont lol but trust it looks amazing (black zinc)
I ordered the basic one but sitll ready to pack in HK
You could block it out I just wanna see how big the label on the back is
Planning on putting some vinyls on the back and hopefully cover the ugly label
you have the white zinc as well?
oh ok
i think this is a very well done sticker because of the minimalism and easter egg 🤗
Is it actually a sticker? Kind of doesn't look like oneb
ikr but it is
its like one of the only times i genuinely love a sticker
It's not the worst but I'm definitely gonna make a cutout vinyl and put a custom image on there
also the photo does the sparkles/shimmer no justice
Didn't even know the zinc case has sparkles
It doesn’t. That’s the texture reflecting in his photo
https://www.amazon.ca/gp/product/B0B49NR7D3/ref=ox_sc_act_title_2?smid=A1FH6QN4EG03AW&psc=1
dont judge them by the price, they look, feel AND sound absolutely amazing
yeah id not recommend to remove switches like this
i tried a couple and you definitely end up deforming the transparent housing with the wooting switch remover
Whoops i already pulled out all of them 😂
id try to isolate the plate with the switches first and then it should be easier
ok lol
Or i just removed the keycaps, but im scared to open the keyboard
Some people said the case might crack or something
dont have experience with that yet i tried pulling out switches and it looked too hard so i stopped on that for now
gonna get a different switch remover and maybe open the case later this week
Yea i need to have a cloth in my hand while removing them to not get stabbed in the hand 😂
But i am kinda learning how to remove them easier now
Truck Bros how we doin
i order module with black and frost case but it doesn’t come yet and i only have black and gray keycaps
Hm
We’re now plane guys actually
I just need my zinc raw plane batch to arrive in EU before NA batch otherwise I won’t be able to claim superiority over NA
none of my screwdrivers fit in the 80HE top row. Anyone know which brand screwdrivers fit?
I used a J0 screwdriver and it was perfect
Isn’t it just ph1 or whatever the standard size screw hole in keyboards are
yea i have a ph1 that fits I was more talking about the screwdriver itself not fitting into the deep holes on the top row of the case
They should just include one tbh at least with the module ones
the bottom row i can get fine
Yes they are but the diameter for the holes barely fits a full sized screwdriver
The rightmost is what fit the best
hmmm thanks yea i might have to buy one of these thinner sized ones
all my screwdrivers are bulky for some reason
Sounds like a good excuse to buy yourself an overpriced but very cool nanch screwdriver set
is it 3rd week of november yet 
is your up arrow damaged?
Sounds cool!
But i feel like the white would look nicer with the reflective white plate
No ,just most basic one, PCR Plastic ,I would like to change the aluminum one when I receive, as you know ,there are so many cases and keycap in china
Am I insane, or does that space bar look upside-down ?
Both
Does anyone else appreciate the signatures on the case? Such a cool little touch
I got a blister from changing all those switches 😂
At least it was worth switching them all, personally i prefer L45 😄
well looks like they just hold the whole batch that ship to China. lol wooting.
only for HK batch
][77777777777777777777777777777777777777777
real
I’m EU batch white zinc on hold too
are the inconsistencies with TX ap stabs mentioned in #🪛│modding_faq for the 60he or the 80he?
60he
so I'm good to buy them for the 80he, epic
80he has different sized holes which shouldn't have issues with other screw ins
thanks
I ordered in June.. how can I tell when its estimated it'll ship out?
check the wooting hub
if you don't have an account yet then you'll need to make an account using the email you used to order
do you guys know when the last day to preorder the 80he is?
It will always be there, idk why it says pre order still, probably because they are making them all the time
anyone got link to topography black keycaps for 80he
it's always available to order - just that when one batch sells out it means they sell from the batch after that
Where in settings can you change polling rate ? don't think my mac caldigit dock likes the keyboard
not available yet, but it's unlikely a polling rate issue and more just high powered HE boards don't always play well with docks
Turn tachyonmode on
yasss hahaaa cant wait to play around with it
it said that for me, still had to give a signature
Had also no signature
I'll get up early just to make sure anyway
got mine today delivered by UPS no signature is wild
ik this has probs been said already but is there any 3rdparty cases for the 80he?
Not right now no






