#🌟│wooting80he
1 messages · Page 169 of 1
he is the majority of people confirmed
i still prefer this 77.5% outcome more ngl
but that 1cm only bothers you
people be arguing about length of things while @livid zodiac and i ascended to curvature already
Yup, no evidence of "everyone", burden of proof etc
same, looks better too
oh yeah then i think there is the salvation which is leafspring gasket right? i saw brandon taylor do that
Too long and curves to the left yeah? Wait...
this whole discussion is kinda pointless cus like, the 80he is the 80he that aint gonna change, thats just how it is
mine mostly curves up on the right, unironically

BERZERCA really thinking he can go back in time
yeah it actually is a HUGE deal and in my opinion a selling reason.
Bro needs to be working for CERN, a visionary
but did you buy one?
we are sorry to hear that, you might find a keyboard that suits you better in the future

for some sure, but not for a lot. I actually would have preferred a 75% personally too, but I don't think it matters all that much

wooting just needs to prioritise the majority rn
they only have 3 layouts including this
companies always have to prioritize the majority yeah
Appeasing minorities kills businesses, hard fact
wooting also just needs to make a product they are proud of, and that is the 80he and i am totally with them on it
we all know fps pros just get used to tilting the keyboard slightly more when they run into the mouse room issue anyway - or they stick to 60% if they have really cramped keyboard vs mousepad positioning
80he looks unbelivable in this
there's so many solutions to berzerca's issue that literally every fps pro has done in the past and you get used to the new position in a couple week of use anyway
You can also just move your keyboard 10mm to the left like that other guy said
yeah but some people don't really want a solution, they want to complain that they didn't get it their way from the get-go
heck even if you want to keep the fps gamer shoulder hunch keyboard tilt thing you can literally just adjust the tilt like a lot of them did back in the day
sure he watch my comment is even TOP comment and look at all the other comments?
All of them have Alumaze, Brass bottom cases, and Zinc
bro liked his own comment
you can easily map a delete key though, comment is kinda badly informed
no 60HE lacks in to much important stuff
they literally upvote not because it's a space thing. People just prefer 75% to wooting 77% for looks
also knob is in the works
OFC
instead of this discussion can we debate on which waffel is best, my personal fav gotta be the stroopwaffel
such as?
there is a case to be made too though. when people look up keyboards and are lookung for layouts the will now see a 80% and it can drive interest on "what is this? i havent seen it before" which can introduce people who may have never seen them before to the brand
wow Wooting should stop all 80HE production because 37 people liked your comment
mind blowing
and whats that
is there a wootility tutorial somewhere?
yeah a 77.5 WITH HUGE empty spaces and borders... great... -.-
again i cannot stress this enough, a poll will make this less annoying for both sides of the arguement
Where is the empty spaces
There is no place on the keyboard where you could fit another key
adding up to a whopping 10mm more than a typical 75%
brother mine came with a delete key by default 
i like kartoffels
I mean regardless of what you want, wooting isn't designing a keyboard for berzerca's needs right now - so why not just move your keyboard to the left 1cm and you'll be used to the new shoulder position in like 1-2 weeks
bottom left nav cluster
"everyone"
"Empty spaces"
Where is the empty space
thats just a potato how is that a waffel
right above the left side of the light bar
Yes I posted several screenshots just search for my name in this chat
im american this can change things
can't - would run into the tissue box
just return it if you dont like it
Basically the size of that Nuclear Plane fortress thing the US designed ages ago
then you also told them that its a layout you want to have or use.
in my language kartoffel = potato , so im actually curious what you meant
danish
same I was confused too
i know kartoffels are potatoes. but we spell waffle differently maybe? was trying to make a joke and i failed.
lmao
i need to find a picture of sacy's keyboard setup
toffel means slipper in my language
he wanna knob here
I like waffles, maple syrup, berries, fresh cream 🤤🤤
Not a fan of blue waffles though, don't even google them
sacy playing valorant with a wooting two he. He went even bigger lol
i like waffles that fly. call the wafflecopters
yeah there you go
can we talk about how american pancakes are closer to a waffel than actualy pancakes
yeah they are much worse than european
Look at it all
8k Hz, arrow keys, del key, f-key etc.
to be fair the name pancake makes more sense for US pancakes than european, crepes should be the default name for them here
it looks a lot more like an actual cake
sounds to me like you should just use the 80he and learn to move the keyboard to the left 1cm then
syrup, sugar and marmalade rolled up in my pancake🤤
Maybe a scroll when on the side of the keyboard
did you even read ANY other comment on nearly EVERY other video? That was just a sneak peak. I watched EVERY video and the sentiment was 100% clear
because a wooting 75% isn't happening anytime soon even if they do it in the future at some point
so why not just try the only solution you have then
make a poll pls
this arguement is degrading
no because I am not a tantrum thrower adult like you, 75% would have been better because it would make it compatible with more cases but I am very happy with the 80he, that 1cm wont make it a terrible board for me like it does for you
its amazing this discussion is still going
I am not annoyed I know what I know and I proofed my point already I can give you countless proof but for now I am sad I have to return my 80HE cause of the way to big case 😦
Those comments are from nearly a year ago, myself and many other people in this chat probably also felt the same way but now its liked by pretty much everyone
I was trying to reply to you politely but you are just annoying tf out of me at this point ngl
sry got annoyed
yeah but when they showed they Keyboard first there were no DEL key you know?
that's true in the case compatibility regard, from a user standpoint 75% is objectively worse imo with those shrunk ass lower right modifiers
I think I said it often enough it is not just my opinion
10mm=way too big
or you know you could move the keyboard to the left 1cm and you'll adjust in 1-2 weeks. But sure return the keyboard if you want to
you can literally decide yourself what you want on the keys, the provide all the keycaps
good news guys
also why do you reply to stuff like 20 minutes ago
is there someone here who knows their way arround wootility v5 that i can ask questions to?
but there's so many 75% that also does things slightly different
not saying anything but its very consistent and weird
Time machine, we live in the present, timeliness regarding relevance is a thing
dude if you move the keyboard like 2-4 cm the ARM is RIP and not in a great position ergonomically
You can ask - Maybe someone can answer as well 🙂
just use the 80HE module without the case, BAM its a lot slimmer 
your arm is already not in a great position ergonomically
I’m a bit confused, are you returning it for the space issue or the layout issue (usability)?
1cm, he didnt say 2-4 what are you on about
I guess you must be blind or don't have the 80HE already on your desk
why does it say that the profile i want to use is inactive and how do i make it the active one?
there is nothing ergonomic about the way you're using the keyboard right now already - you're just used to it
Would be really ugly and asymmetrical to have a knob on one side of the arrow keys but not on the other, can also not fit another knob on the other side
Was the white PET film (tape mod) discontinued?
In either case, you need to get used to a new layout/size. I went from the 60 to the 80, could not get used to the size until a week later.
yep this, went from a whole life of using fullsize to 60%, a few days later it was all well and gud
There is a (white) latex foam with frost case, no need to change the the PET color from black*
Edit: it’s white
Every board change I've done has required a readjustment time of about a week. I'm not Skynet.
but now when i change to the modes it is delayed and it looks really wierd how do i fix that? because it was noit that way before i started fucking around in the settings\
i can send video if you want
Yeah and his posture is ergonomically a nightmare! your arm should be in a 90 degree to your body and only the hands should be on your desk...
best to make it in https://discord.com/channels/167181566978555904/1019755933959733258, it would get lost here
long ass debate going
Oh, I thought I read/heard somewhere that there would be a white and a black PET film, for the light and dark cases respectively.
I got keycaps coming in today
funny ass debate going
thats the foam iirc
best ergonomic setup is moving instead of sitting all day
er his posture is 10x more ergonomic than yours
Ah, then I’m misremembering.
what did you get
Berzerca clearly disagrees
#1286101157122539520 same as this
thta would put the left arm far to your left. not to your right with an angled keyboard
I sit like a folded pretzel and still find nothing worth losing my shit over with a product I can simply return then go bitch to another company they didn't do everything I wanted too
yeah maybe you are not playing competitive then gj! I don't even know what a tantrum thrower adult is wtf you are talking
i mean, there's a lot of pros that play with TKLs
i don't think saying 'someone doesn't play competitive' is a great point for or against 75%
Adults throwing tantrums
"you need this exact mouse and keyboard layout otherwise you're not competitive"
This is uncomfortable but because the wire guide in the case is tilted, it forces the cable up. It’s fine?
what a load of horseshit I mean seriously 
Apparently
"i am going to copy exactly how pros play because i think it will make me legitimately better."
thats exactly what you should not do
i know. thts my point
In fact checking the list of most used keyboards in pro play right now it seems the majority are tkl. So i don't think saying 'someone using bigger doesn't know competitive' is a good argument
#🌟│wooting80he message imma leave this here too
Same, i need letter of the law choreographed instructions
if I'm not using my favourite esports players exact setup will I even get any kills
Okey so now i litterly deleted my backspace and enter buttons somehow can someone send a he80 profile i can build off off?
you can add those binds back from the remap section in wootility
Feels, didn't have top percentage player setup and I got minus kills, world record negative k/d
32526fb180a41d3b21a6084faa837d1dad59
Im destroying my keyboard im about to cry

Under Remap, choose QWERTY
I mean... you can always do a factory restore, even if you can't use the keyboard at all.
me with a membrane fullsize and ball mouse kicking ass in the 00s, must have all been a dream
Demz were the days 😂
me accidentally setting my mouse to 125 Hz polling rate and still winning matches
Dirty fkn balls all the time 😂
damn you found a glitch, can't possibly have been your skills
that feel after you cleaned it though

We found "The One", red or blue my guy?
I bought it because I love your company to death. I bough the 80HE just to support you (prob. I will see it in the used market so you keep the money) but yeah as I said it is just to big compared to the 60HE. I will continious hit my mouse against the KB sadly... I still will give it a try in the next 1-2 weeks but yeah... I would love all the bells and whistles in a 75/70% compact Keyboard. We will see...
This was 100% worth buying even when I had a 60he before. Finally 80% layout, 8khz and L45 v2. It feels so nice to use you can totally feel the difference vs L45 v1 and the housing. Feel better than jades imo, much less wobble and 4mm travel distance
lets talk about keycaps - oem profile is terrible - Balder what were you thinking? that scuplted keys hurt my pinky coming from low profile
the muscle memory of a newly cleaned mouse still exists in my brain
Wooting ate
What are those keycaps
Dude I never every talked about a knob on that position?
White Kana looks great. Never saw them outside of renders 🙂
I think they said OEM is the most effiecient way to support multiple languages
Man I shouldve went with those they look so nice
oh damn thats a clean ass sublegend
went with the backlit just white ones instead
ah that made sende - I was using low profile keyboard for so long - I didnt even thought about having issues with new keycaps - well just ordered XDA now
is that ghost or frost case? hard to tell when sitting on a black mousemat
Yeah I always turn rgb off Im a minimalist
Ghost
im going with HiFi foxes for the sweet Jolly Rancer aesthetic
ghost 100%
so glad you guys did not only one but two variants of transluscent cases, makes the 90s kid in me all giddy
if you cant tell between the 2, its usually ghost
Something to keep in mind, I'll be coming from my Roccat Vulcan TKL Pro low profile to my 80HE
I would like to try XDA -- what did you get?
damn, my copy has front right and left wobble 
I also got a spare black case if I decide to get black keycaps and go rogue
Noice
Hi guys. I want to buy the 80HE module but notice in the unbox video that there is no foam included. This is my first time trying to build a keyboard so i'm not sure if it will affect the keyboard sound wise etc.. Any ideas? Thanks
Yes there is.
It's in the case.
ordered these - was not to easy to find some in ISO DE layout which didnt look weird
there is tho
Imma just keep drooling until mid-Nov
Oh sorry I didn't notice it in the video. Thanks!
wait which foam?
Yikes im really not digging the font
The EDPM* foam in the case.
am kinda wondering if these wobbly case reports keep coming in if we'll get it in november or it'll be delayed while they look into it
nice - what does this remind me of .... Mac keyboard?
It already delayed past my bday in Oct, come onnn, before Xmas (EU-Brug, in Australia)
I understand that 😄 for me being almost blind I didnt care to much - its large enough that was important
am also in Brug
Aite understandable
@atomic brook i might be mistaken but the foam that covers the entire module. I might have overlooked it
oh that its there
Bit of a moot discussion.
You buy the module and the case = you get everything.
i just thought he might have thought about the plate foam
The what now
Have Igor bend them back into shape
Plate foam?
And keycaps
and switches
The... the 60HE? This is the #🌟│wooting80he channel, Drak 😄
And switches
went for the module as well because frost case and slightly faster shipping, hope my clumsy ass don't mess up the assembly
True
mb just thought of that in case
80HE doesn't have the foam inlay like how the 60 does. That's where the gasket mount silicone inlay is.
I’m confident you would hit against the same problem with a 75%, hitting the side. Maybe with a compact 75% it won’t be as bad.
It always takes a little while to adjust, but what you simply experienced now is also the power of a 60%.
But ehhhh le cry from people wanting dedicated F-row and arrow keys ;💁🏿♂️
I think the wobbly issue is caused by the front middle not having a screw when the left and right corners do. it sags a bit.
I didn't had that problem with my Ducky
Wobbly issue?
It's nice you have both, both is good.
I just need arrow keys and f row for mit job as a developer 
the 80HE is definitely the most money I've ever spent to get an arrow cluster
you can say that again...
the 80he is the same size as my 75% glorious gmmk pro. i dont see what the issue is supposed to be about its size 
We have a few reports of the case tilting when placed on a flat, hard surface.
money well spent
keyboard doesnt sit flush on tables
i use a 100% just fine without tilt
Tilting?
so i really cant defend him either
its the most money ive spent on amy part of my setup except the PC itself. but i also bought both switches and some extra stuff too
I had exactly this keyboard and never ever had an issue with hitting my mouse against the Keyboard 🙂
Yes, like in ranked matches, the case just starts screaming profanities and flaming you and everybody near
Plastic or zinc case?
same, especially given this is the 4th keyboard I buy from wooting 
Awesome, tilting ftw then
Both had that issue iirc
plastic, ghost
but was only 2 reports
65%, compact 75 would experience similar. But if you go from using a 60 to that, then you’d still have a chance.
Oof I didn't know there was reports of plastic cases having the issue too
I thought it only concerned the plastic cases
Lmao I tought it was Zinc only lol
*report - just 1 earlier today
hey 👋 ! do you have a pic without the rgb on of the keeb ? i got the exact same one as u and there is litterally no one except you posting pics about it 😭
Yeah only a couple people mentioned this today out of thousands of people receiving their keyboards
probably ya
nah just 1 of each. The other guy discovered his table wasn't flat lol
oh ya that guy
If you look messages from @boreal cairn you can see what he is referring, he posted some videos and pics. His zinc alloy was bent and didn't stay flat. But iirc I have only seen 1 more case apart from him
plastic ghost in my case, sent an email about it already as the support page seems to be borked
But also safe to assume the percentage of people having the keyboard and being here is far from 100%
You can try loosening the screws a bit and flex bending it a little to straighten it out with PCR.*
This particular type of issue is check at assembly line. Shouldn’t be common, but can never completely rule out.
There is always a type of arc shape that happens with long objects that are injected.
me he got negative shoulders
wooting sending out hotfixes for wobbly cases
Yea that must be super rare, wouldnt be only 2 reports
Would a defect like this be covered in warranty?
Is this fine? The purple is how the cable is going, because the shrink wrap is sturdy it pushes the cable at an uncomfortable angle.
how mine is on both sides, basically sits on 3 feet (mid front and back ones), loosening screws did nothing and the whole keeb is visible bowed
DHL tracking hasn’t updated in 2 days damn
Yes, but I would rather spend a minute fixing it and not needing to go through the effort of RMA for both parties.
All I can say is that it was crazy hard to stick the cable into the board and line it up like shown in the video
reposting the vid from yesterday
Hey I'm looking forward to receiving my 80he and I'm looking to buy separate switches for my keyboard. More specifically the gateron jade max switches. Does anyone know if they're compatible with the 80he? Thank you in advance https://www.gateron.com/products/gateron-magnetic-jade-max-switch-set?srsltid=AfmBOoqTmUEgyFKBrHeltduxo39AaDbQZ6IHckZqO_yE6NVelrtVd95j&VariantsId=10856
Yes
Oh yeah 100%, if it is just a screw tightness issue i'd much rather deal with that myself than to wait for RMA, that's understandable
yes
i cannot confirm 100%, but most likely
Tried using the differrent feet options for the height? May fix it
Oh man that sucks
Anyone else had problems with the 80HE randomly stopping to register inputs and having to replug it?
Oh no bro
no as the back of the keyboard is not bowed like that + i want this particular angle and not the other ones
I believe there's a spreadsheet with switch compatibility in the modding_faq channel
they are, but I would like to introduce you to the geon raw he. All the tight stem, nice sound benefit of the gateron jade max for a fraction of the cost. May your path to raw he be blessed: https://divinikey.com/products/geon-raw-he-linear-switches
Geon Raw HE Switches feature a mold designed by Geon for high precision due to its low mold cavities. The switch is a pole bottom-out, shortened 3.4mm travel with a through-hole bottom housing. Geon Raw HE Switches Feature: 18 included in each pack Linear Hall Effect Switch Top Housing: PC Bottom Housing: Nylon Stem: P
Not just loosening, you need to twist the entire case a bit by holding right top and left bottom, trying to twist it.
Thank you guys much appreciated
Not here, keyboard sounds basically perfect besides a slight tinny sound on spacebar, no odd sounds from the film.
Yeah i get you, but sending it back means waiting so long for a replacement?
i was waiting til you'd post that
you sure your desk is flat?
I would make a video but I’m on my phone on my way somewhere
Yo calder .. next week can i expect my order to ship to india ?
ye i tried shifting it around with screws loose and also flexing case some (to a reasonable degree) + tried to tighten back screws in different orders (from middle to outside, outside to middle, etc)
I think it's clear what you mean now, you need to mold it into shape by twisting it on the opposite direction than the current bow
But how do you do that with Zinc tho O.o
Weird, I tried pressing it on by hand but it still happens. If you press on the middle of the board and let go, you don’t hear the tape unsticking?
If you’re in EU-Champion batch and don’t have a white zinc, then yes it should this out this week.
Next week*
ye, tested on different surfaces as well + put the whole thing against straight edge to triple check
Im in eu kampieon
You don’t.
One and the same.
ship non-80he orders, im dying here
You'll have to wait for that, they paused all non 80HE for a bit
Sorry I typed the Dutch name but that is the correct one
simple, you buy an industrial press
We'll be resuming non 80HE orders on Monday 🙂
LMAO
Sounds like a skill issue tbh
basically the only thing i haven't done is re-assemble the whole thing
Yes.
Ohh but im pcr black
So it’ll be ship next week ? Right ?
Damm whats the backlog like tho, like my order says its ready to pack so any idea how long till it would leave the warehouse?
Bummer. Did you get module kit or assembled version?
I also have the tilting issue on my plastic keyboard but you really have to apply pressure on the bottom right side to find out (in my case). It may be more common than that but people didn't realize (just a supposition). It makes the arrows keys on the bottom right sound different than usual.
Oh im blind, sorry
it was assembled pcr ghost
You applying pressure to the case OR the key.
You might just be pressing into the silicone foot
I thought so, but the other side of the keyboard doesn't react the same way
pressure to the board, but since the silicone is not touching (even if very slightly) the surface, it creates a small noise when pressing the key as well
Yeah I saw more than two just this morning, and you have to remember not every 80HE user is going to be in this discord
Just use a heat gun
Fucking deal with it like with hard tubing in PC cooling, heatgun + 90 degree angle
Then you have a new kind of ergo keyboard KEK
Legit, easiest fix
Any ETA for white zinc cases Calder?
Well yeah, and not everyone notices it
Put 10 books on top of the keyboard and go to sleep
I think this would unironically work in the long run, pressure is pressure and the case must be under some kind of internal stress when standing only on 3 feet lol
Does it do the same with the 6 and 10 degree feet?
yeah it lowkey may work
i watched the livestream they have on the youtube page where they speak openly about wanting to gather more infomation and even holding them back but i think he said around a month but dont quote me just passing it on as i also ordered white
That's a good question, it might be a question of tollerances in the silicone feet
Maybe some feet are just slightly slimmer than the rest and it causes the bowing
A month delay?
but I forgot to mention that I haven't tried removing or reinserting the silicone pads, it may be them causing the issue
At least I reckon
Bruhhh
Hello Wooting! Do you know if KDBfans has reached out wanting to create another tofu case for the new 80HE? Would love to have more plastic options in the future!
Alright ig, it’s not thaaat bad right? (It’s bad)
no info other than one anon 3rd party making an aluminium case
The rubber feet sometimes take a bit of wobbling to get them flat so it might be that
I compare it to fusion... Only 20 years away 😅
im aware how valuable wootings reputation is to them and customers so yeah im sure they will want to make 100% sure its not going to be a issue
I would need to check my email but I don’t think so.
i even canclled my order after first hearing about it but then emailed back saying to undo my cancel
haven't tried as those angles don't interest me and using them wouldn't be a fix, but in general i'd say it's less about feet more about deformations after being injection molded combined with thin and straight elements in the case
oh man imagine fugly of the tofu spreading to 80HE
plus back is flat and back feet are well secured
And I’m guessing they’ll also do an update in the following weeks
yeah i would imagine so maybe a blog post or something
We didn’t say a month. We will have a firm conclusion next week.
This coming week we’ll have an update
Calder saving my day
Nek minut 10 months 😅
The boat has departed from US!
Its headed to the warehouse
Hi Calder, any chance we will have at some point 0.01 mm actuation, 0.04 or even 0.01 mm RT and adjustable dead zone (I know they could not all be set simultaneously to the lowest)?
0.01 actuation doesnt exist
Nice, where's it off to?
everytime calder appears its just QnA now
During yesterday’s live they discussed about 0.01mm actuation point not being reliable
ew
one of us one of us
If anyone is interested in a profile for the 80HE I tried the best I can:
For typing & browsing: 13ed1ddfbbac802e4f0642f810222c25ea41
For Competitive Gaming (Valorant, Warzone, Overwatch [NOT CS2]): aabf873dbf439626c9fb9d4a6aad5c147b73
For Competitive CS2 (and every other game which has SOCD banned): 52cb1221cbf4487e301e5bd824b2a7941aaf
you just copy paste all profiles and you can swap them with the "mode" button. COMP is without WIN and CAPS you just need to press FN and can enable WIN & CAPS and it has activated SOCD
No worries! Thanks for everything you do! Keep crushing it!!!👊
#🌈│wootabase_profiles (just saying because it’s not really be where u post this)
on todays qna
I hate chinese brands claiming that they have 0.01 actuation and rapid trigger
just shut up
I would wish to write out an essay, but lacking the time.
The short answer is. We do not plan to go sub 0.1 unless we can guarantee to remain stability and reliability.
It is also silly to go any lower and makes the keyboard unusable.
We already measure at 0.02mm increment*
And RT sensitivity, do you plan to go sub 0.15 mm?
Yes we’re going to update it to 0.1mm.

why do people still even care about a fucking 0.05mm difference I mean come on 
you're really not noticing that small of a window
OCD moment
They will call it 0.1 but youll never know if its really 0.1 or 0.15
people caring about sub 1ms difference 
My favourite part of the chinese board stats is when they list their measured deadzone as 0.12 or something small vs competitor at 0.2 or whatever. Then you realize later they count actuation as part of deadzone so it's really they enabled buggy 0.05 actuation +1.05 deadzone vs. another board that started at 0.1 and has 0.1 deadzone that ends at 0.2.
So both boards have same-ish deadzone but they cheated the chart to make it look like a big difference
they love the 'total deadzone' calculation trick in their charts
If my keyboard doesn’t do 0.125ms max I don’t want it
I like round and 5's... Chaotic ocd 🙃🤪
The Good the bad and the Ugly - after one day use
The good:
Sound and feel of the switches is great.. spezialy the sound profil is something i love
Very Flat profil i didn't notice this bevore but i really like it
Software ofc..
The Bad:
palmrest is in comparison to the keyboard to long looks ugly but feels good
the software has still some color bugs whats green in the software is yellow on the keyboard.. and yes my screen is pretty much calibrated..
The Ugly:
The LEDs can't produce CLEAN WHITE it has a reddish tint wich is quite annyoing for the price i excpected proper lighting
that's my opionen so faar im very happy
I received my keyboard today the quality is simply exceptional the fluidity to type messages the noise attenuation is incredible I tested it done in game I have to fine-tune the settings in game but for now I am blown away by the quality of the materials and the fluidity I sincerely hope that it will last over time the only problem is that wootility is not supported by firefox I waited a long time to have this keyboard but I don't regret my purchase I recommend you without hesitation although I have always had high-end keyboards this one is high above I must admit it <@&476752926044454928>
you should be able to just adjust the color of the led to get a cleaner white
to compensate for whatever the led thinks of white just change the coloring a bit
I was just curious because well implemented or not there are Chinese brands with 0.01 mm actuation / 0.01 mm RT / 0.00 mm dead zone (although can’t be all set simultaneously to the lowest) and knowing that Wooting has been the pioneer of HE, I wanted to know if they planned to go lower
For the clean white part, because of physics with 3 leds it’s impossible, you have to adjust the rbg here and there and try to make it look like clean white, you’ll never (actually) achieve it tho
try 210 for red
i'd watch yesterdays stream if you're curious and/or watch mioni's 80he review where he covers really low actuations/rt/deadzone values
thanks to both will try to reduce i wished it hat cleaner white with a 4. white led or so i don't know my keycap set looks great on it love it would love it more with clean white
tldr calder did say they are working on improving deadzone but never at the cost of consistency, which is where wooting beats every chinese board that enables those fake settings
One more notice the style of the case with the gaps feels "OFF" on Zink case.. it would feel better if it did not had those gaps and would be a solid piece
go to wootility through edge and hit that button to install web version on your pc with shortcut and all
i use firefox but did that for wootility
i ve try but dont work for me
pure white is extremely hard for any RGB leds on the market though
there's a reason dedicated white leds are still a thing apart from cost
weird, maybe try chrome, what i ended up with
White is difficult with RGB LED that gets diffused by materials. BUT we are still missing a calibration step, calibrating specific productions bins with certain color shifts for each keyboard.
It’s a bit of a next level thing that we can still update by software once implementation is 100% complete. We have all the info for backwards compatible implementation
i ve opera gx he work whith it i dont like google
And thanks a lot for the first impression! Glad you’re enjoying it
thanks for that infoi yes the color is a bit off
phosphor-converted LEDs or RGBW
and yeah different batches of leds are going to have slight variations and needs to be calibrated slightly different
so its basically impossible to get it 100% consistent across thousands of boards
True true
what ever i wrote about wood palmrests beeing better was partially wrong the silicon feels great honestly wood has the looks going for it though
best thing you can do is experiment with the separate rgb values, like try lowering each color separately a bit
Same as Cerakote I guess 💁
Appreciated. Glad you’re enjoying it!
Anders, if my non-80he order is read to pack when may I expect it to leave the warehouse?
Hopefully sometime next week.
my two HE has a slight blue-greenish tint when "fully white" while my 60HE has a slight red-ish one
it is what it is
Yeah because its producing a white colour by combining all of the colours, RGB makes the fake white colour if im not mistaken?
You can't get white from mixing colours. But you can trick the eyes and brain into making it seem like it
yeah this
I think its usually a light blue colour
the mix is never going to be perfect
But i love the layout - i thought making a 80% instead of a 75 explodet was a mistake BOY was i wrong
Bro copy pasted from chatgpt

ok but what if
And yes I did, still correct though
Getting a wee bit spammy at this point.
Bruh
Please stop.
80.1 HE
NO
NO
Thing is, it is neither an 80% nor a 75%
80% controversy.
that looks very bad
You basically turned ANSI into ISO in the worst way 😄
80% logical fallacies
this one better eject people talking layouts 
What’s the % of an ISO keyboard? (80HE)
It’s not aligned with anything and feels like an unwanted eye sore

you guys and your beauty standards
But I'm so prettttyy
it has an extra key without changing the form at all
mathimatially im correct here
Everyone can appreciate the current 80% layout a lot more. Thanks Zombie
yeah true that only 3 keys are missing and one of thos keys is windows option key wich nobody needs and 2 others can be easy done with Mod Tap (Pictue up down /Home End) honestly its super small an d feels like the right aproch
Leaking knobs
calder knob reveal

i love this for some reason
@cold hill its because you undertand that functionality is beauty
...to some extent
Now I can't unsee this I will have nightmares tonight
so your saying its an unforgettable design?
Reminds me of the memes everytime phones get another lens or NVIDIA releases an even physically bigger graphics card
sounds like a marketing plus to me
ANSISO cannot hurt you. It isn't real.
No no no, this is another lever of fivehead
wooting knob pls gib
You basically evolve into pure energy at that point
I need it
indeed
I made a knobs for my current keyboard. its basically a diy midi controller and using midi control, i can control volume of separate apps. its awesome
I do already have a midi controller with knobs on it
but its too damn big to be sitting here all the time
My first solution was akai LPD8 mounted to table with 3D printed brackets
I guess you could use UwU as a "knob", right button to increase volume, left one to decrease, middle to play/pause media
if you want ansio you do this:
what in the world
I like to control separate volumes of apps
No no. Let him cook.
mine is definitely bowed
for gaming its a better layout because you get both shift and that extra key
🧑🍳
it ain't true ISO without chad b i g enter
A knob would control the volume of ur whole pc wouldn’t it?
Yep
Thats why i need multiple
What I really don't like at all are the gaps and corners in the design of the casing. It feels edgy and not solid. If it were made from a single piece of metal and the gaps were filled, it would look better. In the videos, it looked nice, but in hand it feels sharp and somehow off, and even seems cheaper than a solid body construction.
I want a knob
yeah this is kind of an issue for me because I got master volume on my audio interface
lowering volume in the OS worsens the quality
I can send you the models to srew it in to desk
buy a big one Creativce Soundblaster X4 i did that never want a nknob again on a keyboard
nah its cool the knobs are kinda horrible on it anyways but thanks
Multiple knobs on one plate you mean or just multiple knobs? Because multiple knobs on one plate already exists
Right now I’m using a mini stream deck
I know. But we were talking about the solution for the he80
best knob specialy when your using anyway a bit better headphone 😉
The shipment process for White Zinc Alloy is stopped temporarily? Didn't seen the livesteam, can anyone tell me the timestamp from the stream?
I think you can separate it so half controlls volume of apps and other is for you other midi needs
yeah technically you can do a ton of stuff, but I just don't have the room for it on my desk at all times 
need a bigger desk
yes because of "scratches" whichh acrtualy are no scratches but dirt .. i mean honestly a scartch can't be cleaned off..
Makes sense
Elgato have their way of doing it, imo any knob is compatible, or explain me what u mean by compatibility with the 80HE?
Same lol
I do have a volume knob on my audio interface but its a bit far away from my chair
ETA for Resolution of this Problem? Any officials here?
so I just use the software to adjust volume
Basically have knobs to controll volume of separate apps, not just the master and make nice and neat in combo with 80he.
and its only one knob so you have to push the encoder and scroll between the channels to adjust main out or headphone volumes
What if the wooting knob controls the power scale of your other knob
random knob placement
A knob of a knob
if they allow the wooting to send out midi from the knob that'd be the most lit thing ever
would solve a lot of my issues
Sadly i think its such a special usecase that it will not get that much use
Or uswful just for like 1% of users
there is a wooting midi application for the analog keys already, even if its kinda ancient and neglected at this point
I get that is a very niche thing so should be glad it even exists period
Yeah
I actually have one slight issue with a software setup—maybe there is a solution. I have a function layer, and the RGB helps me see which key is which: orange for media, red for keyboard internal stuff, etc. Now, I have two keyboard functions on my function layer that provide the ability to dim or brighten the LEDs. But for those two, I don't want to see the function layer; instead, I want to see the active main layer because I want to adjust the brightness of that layer, not according to my function layer's RGB.
is there a solution to this?
You could get something like the stream deck of elgato (the one with the knobs) and I know some brand that does knob only but I don’t remember it
I made my own. stream deck not cheap
considered getting a stream deck plus at some point but man those things are pricy as shit
I mean, if you’re expecting wooting to make a knob that goes with the 80HE, can control multiple apps, I don’t expect it to be cheaper than an UwU
if I wasn't a brainlet I could write some scripts for my rp2040 macropad to do this stuff but alas I am
I honestly dont want them to. I like self made stuff lol
Try this https://www.midi-mixer.com/
So I’m guessing if they ever make a knob, it would be one control master knob
That seems great
I allows you to map your own midi controllers, and lets you set knobs as volume cotroller for separate apps
that's pretty neat, been looking for something similar, thanx
NP, it also supports to set up the buttons to do stuff. great for media cotrolls
yeah if I can find a place for my launchcontrol xl it'll most certainly come in handy
yaeah, its a great tool
There are presets for most controllers, but sometimes it gets complicated, if u need any help seting it up, ill be glad to
got one of these boyos but my dumbass can only figure out how to do simple binds on it
How much did it cost?
50 bucks
I made one of these lol. its pain in the ass since i made my own code and stuff for it
Strap yourself in, we're launching in T-minus 10 seconds...Destination? A new Class M planet called MACROPAD! M here stands for Microcontroller because this 3x4 keyboard controller ...
Microsoft Numpad 20€ and fully programmeable.. why pay more.. ^^ it's a numpad in addition nicely usable as calculatore too haha^^
I dunno I don't really like the numpad layout
this is sleeker
I know some people swear by numpads but I always favored the num row despite my age 
sleekest 😉
NOT NERD ENOUGH
https://protadesigns.com/products/printed-pad also found this one
the thing is you can programm any key really nice for macros etc pp software is really good
i just bought a £12 chinese macropad from aliexpress lmao
cant complain about it tbf
got one of those too but it suffers from chatter
There are deffinetly great options, I just like to make most of my stuff lol. It is gread for my ADHD to focus on something from time to time lol
I'd love to make my own but am kinda thicc so it takes me ages to learn things like CAD or programming
i would absolutely love to make one of those fancy macropads but i don't have the money nor time atm unfortunately
am well past that age where you learn things quickly 
yeah, I have issues with sleep, you cannot imagine how much time that gives me to do stuff lol
insomnia is a bitch
yeah...
yep there's plenty of variants out there, I just opted for one I could figure out how to use with relative ease
even the adafruit one is kind of on the limit of my coding abilities though 
This one uses via, which I think is great
should just suck it up and get a stream deck tbh
i just finnished highschool and my work does not give me not even close enough money to afford that lol.
and I just bought a new computer so it'll have to wait for some time 
anyways we getting pretty offtopic for the 80HE channel 
nobody seems to mind yet lol
mods are sleeping post pictures of competitors keyboards
this terifies me
its what was issued to me in the WFH kit
looks like short travel switches, definitely a godtier gaming keyboard
wait till you see the matching mouse
oh no, run
they told me to
are the lekker45 better than the default or whats the difference?
The difference is the amount of force you need to bottom out the switch. Its mainly preference
They are easier to press in that's it
so for the WASD and such recommend?
yeah im gonna try the standard for now and test it out
They take less force to press
It’s solely preference tbh
I like the 60s more than the 45s
mostly play cs, so maybe the 45 can cause missclick or is it not that sensitive?
imho 60 is better in he switches since they give more control over the full actuation and we here on the wooting discord like to TAKE CONTROLL
^^^^^^^
Less likely to misclick with heavier switches
just me or does the keyboard when trying to save settings lose connection to wootility
@buoyant solstice I live in the U.K and my 80he was shipped via DPD. Please can you help me understand what this means on the wooting website:
Orders with a pre-tax product value above £135 prepay import duties and fees at the time of purchase, and we get billed by UPS who pays that to HMRC.
Where did you see this exactly?
On the wooting website. I have a screen shot
A link would be swell
That sure is a screenshot
:(
november gonna be great
ima be so happy in nov
Early Christmas
i almost got a 60he+ cus im not patient but i decided to wait
am lucky to be enjoying a 60HE already so the wait isn't too hard on me
soon enough you'll be reunited with the arrow keys and f row
i got a keychron q1 max its a rlly nice but no wootility
letsgo
imma give the arrow keys a warm embrace, f-row can sit in a corner though

Next week is our week Raw zinc gang
am eyeing the raw zinc for the future, starting out with frost pcr though
Managed to find the link.
So the UK is a fun fun time post-brexit. But to sum it up all orders to the UK include all sales taxes and import duties - we charge it all on checkout.
when r the 80he off pre order and just regular order
When more stock arrives in a batch than what is spoken for already.
i see so after christmas lmaoo
So are DPD confused? Please can someone ask them to release it to me?
Ok. I called them earlier but they said there was a charge that needed to be paid however their team that deals with import charges isn’t available on the weekend so hopefully when I speak to them on Monday they will clear it all up
They should all the necessary paperwork. You can hop on to our hub and print the invoice showing DDP and everything.
at what point is yours in the DPD tracking?, I've noticed mine hasn't moved in quite a while, wondering if its the same reason
3 weeks
i got the 80he today with zinc alloy, i must say the keyboard is really bulky and really robust so very nice
I must say, comparing the 80 HE to the original 60 HE and the Two HE: it feels better. Not sure if it's the newer switches or the more stable housing, but there's a clear difference in feel. Only the spacebar is too clacky (and has been with all my Wooting products); a little foam fixed that mostly. Very happy camper here.
Ah and the ergonomics are better as well, I like that it's slightly flatter than the 60 HE
Edit: The newer PBT keycaps have a nicer font, but let way less light through compared to the older set. That's a little meh.
Ah ok. I’ll do that if it’s necessary. Thanks bro.
on wootility says my keyboard is paired but not connected, anyone have a fix?
are you using V5? and did you firmware upgrade?
yes and yes
do you have another Wooting KB connected?
Hi, i recently got my Wooting 80HE (it feels amazing, it's awesome), the only problem i have right now with it is the following :
- When i go on the wootility v5 (or v4) web page (and even the application) it keeps disconnecting and reconnecting my keyboard really fast, but i have no problem using it otherwise.
I was looking for some answers but couldn't find what i was looking for, maytbe someone already got that problem here, if anyone knows a solution to it, let me know.
Thank you !
(you can dm or @ me)
(I had issues while my 60 HE was connected as well)
it did the firmware, then once completed it said error, and now i can see it but it's disconnected. No this is my only one
do you have any rgb controlling software open in the background?
error connecting*
Oh i may have ICUE opened
Should i turn it off
yes try to close that then see if wootility works
This might be a new issue introduced with V5 compared to V4 tbh
Does the keyboard come prebuilt?
no
when i press down a jade switch after replugging on wootility v5, 80HE, past 3.25mm it snaps down to 4.0mm immediately
but super easy
Well yes, but without keycaps installed
Thanmks
it depends on which version of the 80he you order
Okay, it keeps saying the keyboard is disconnected ''Error protocolmissing required 'scale'*
can you send a screenshot, im not sure if ive seen this error before
arent you hardstuck ascendant
that's the v5 web page
i have same issue
I had no problem the first day, when i made the updates and stuff
hmm interesting, i think its best to make a post in #1019755933959733258 as this may require some troubleshooting
maybe its the cable
this was random, what is your reply referring to im confused
I am using the Wooting Cable
cvable issue had the same change to wooting cable or remove a hub in the middle and directly connect
sorry i didnt mean to tag you haha
in this case its still a cable issue test other cable
Okay i'll try removing a hub
ah yeah hubs might not work with wootility, try connecting it directly to the motherboard
but it is strange, i had no issue using the exact same setup at the beginning
well it's connected to the motherboard
that's what hubs do they work stup woprking work again
that is interesting to hear tho
i will be using raw he
never connect something ioiomportant to a hub
Removing this image because it has the serial number visible, wouldnt want that showing 
No problem 
its like the unique number of your keyboard
Thats mainly for support to identify your specific board
oh good eye mango. can tell im tired when i dont notice that 
Oh alright, thank you
They can do fradulent rma so they would get free module
Okay so i had the Wooting 80HE failed to connect. Error: Timed out waiting for a response from the device error, and i just tried changing the port i plugged it in, and now it's connected on V5 🙂
Chilling on my work lunch break, so i get to take time to look deeper 
do you recommend plugin' the keyboard on the back or the front ?
enjoy
it doesnt matter in front or back, aslong its connected direct to the pc
had both at the back, just changed which one, hopefully can work for you
Preferably youd plug it into your computers mobo ports 
alright thanks
Not necessarily. Front-USB tends to fail quite quickly, especially with top-mounted ports, as they gunk up quickly
man my 80 he looks so good on my desk
Also, front-USB is almost always connected via a separate cable, which can lead to issues depending on quality
feels good to type on too
i like a bulky keyboard. so it doesnt move much
does anyone have a good image of a zinc alloy raw with keycaps installed?
Im between the raw and the black zinc alloy, but i just cant find any footage of the raw with keycaps
im saying its heavy
wait what? This was supposed to come with preinstalled keycaps?
"Oh you bought a non ANSI keyboard - here's your 15 minutes you have to waste to install your keycaps compared to Americans"/s
1+ ghost
提供: Wooting
Wooting https://wooting.io/ja/wooting-80he
文章で読む: https://dpqp.jp/wooting-80-he
X: https://twitter.com/mionigg
Twitch: https://twitch.tv/mionigg
YouTube: https://www.youtube.com/@mionigg
Discord: https://discord.gg/mionigg
Blog: https://dpqp.jp
Index
00:00 Intro
00:09 組み立てはとても簡単
00:35 キー配列とレイアウト
00:52 Zinc Alloy Case- Rawが至高
01:0...
i have black zinc
how is it
feels nice
⌨️ Get it here: https://wooting.io/product/wooting-80he-zinc-alloy-case?Color=Raw
Unboxing video of the Wooting 80HE Zinc Alloy RAW case. The case is available to purchase separate, but can also be combined with the 80HE module. It isn't available as a pre-assembled kit.
This video shows all the items you will get out of the box.
✨ Follow our s...
i feel like this with white keycaps would look good
what keycaps did u get @buoyant agate
bad video in wooting videos you see some prerelease ones with white this video ios to dark to judge
i have the standard build with zinc alloy case, but i did get extra keycaps
I've got the 80HE with a plastic case - is it possible to swap for the zinc alloy case? On the page it says "module"
when did u order it
I already have it
plastik iks just 20€ - just order it in addition
I don't want to replace it. I want to buy the zinc case
And swap my hardware into the zinc case
check if the zinc is sold by itself
Should be easy to do, its just a few screws
https://wooting.io/product/wooting-80he-zinc-alloy-case?Color=Raw well buy the case then
the zinc is not cheap
It says "module" on there. I don't have the 80HE module.
You can just take out your current pcb and throw it in i believe
the module is inside your current case
does the white zinc's paint really scratch so easily?
That's why I'm asking
well the answer is yes regardless
is there a picture/leak for the knob on the wooting keybaords?
idk. i dont wanna buy it bc of what that youtuber said
im between the zinc black and raw
Check Pins . Few videos there
yea i had preordered the white one and im now very scared
I think there will be some information soon
OK, I thought there was some difference. Thanks!
to reassure you, some people said that was just the metal of the switch puller rubbing off, not the actual case
which was why he was able to clean it off with a sponge
so i think you should be fine
but im not sure, as i dont have it myself
hmm ok i'll wait to see the update then and if they confirm something is wrong ill prob switch
Anyone remembers the ducky one 2sf oneofzero edition? That had the same wobble issue. The case was also shinethrough at the back. Bending the case at the sides fixed it, maybe it works on 80he too
This waste of money right here
You vs the one she told you not to worry about
Thank you for the tips and help, i somehow managed to unbug it
Dont ask me why the kb is so dirty, I was hella gaming back then
ghost and frost r so smexy
make sure to clean ur keycaps since they're white 😂
bruh the kb on the left .wtf did you do with it
I gamed
with feces on your hands and no towel in years?
Yes
aight makes sense then
literally in love
Hard
can you make a pic with rainbow leds enabled
@buoyant solstice I downloaded the invoice and there is nothing on the receipt that suggests any customs charges were paid?
interesting keycaps
anyone got the Geon raw's?
mhm
i have them...but no board to test them on yet 😭
Haha I really wanted to see the rgb on them cuz i can't find anything online
Was gonna get some but the shipping cost killed it
you are closer to the company than me. I shipped them to eu
shouldve orderd with the woot discount 😛 15$ off was nice
"DDP"
ye woulda been great to know about the discount before it ran out 
Delivered Duty Paid.
does wooting sell Geon raw's?
no they just did a collab with them for abit
Ah I’ll highlight that to them 👍
oh ok, cuz i ordered them from geon's website yesterday XD
Shoot us an email just in case they won't accept it. We'll have the fulfilment center provide a proforma document for them just in case.
I sent an enquiry on the wooting website earlier but as your always here I thought I’d follow up with you in the meantime.
I tried bending it earlier when Calder advised it. It didn't help. It has quite a the bow in the middle, and If I bend it anymore trying to correct it I'm afraid of damaging it further.
Sure. Just keep in mind that I can't do much from Discord. Specific order information has to go through email. I can just answer general questions here 🙂
What rgb color profile are you guys using on your zinc white case? 
static + ripple
Best one
What does this exactly mean? i need a backround service?
80he came today so happy with it
Mine too, it was the wait and money worth
which settings are people using on 80he like 0.125ms? rapidtrigger and when rapidtrigger gets activ... for fortnite would be interesting for me
Yeah definitely only thing is I hope they realise a white plastic case for it
I use rapid trigger for my edit bind only and on the lowest actuation and most sensitive
You gotta use the tachyon mode for the 0.125 ms
how's everyones 80HE? im still waiting for mine 🙂
Great feels and sounds amazing
perfect if it wasn't for that dot
yeah I am using that already 🙂 0.125 I am asking do you get any lagg in fortnite while having 0.125ms?
oh damn
no
I hope everything would be ok with mine. I got Zinc Alloy-Black so im still waiting for the delivery 🙂
No I haven’t noticed any lag it works well for me
and what is about continues rapidtrigger?
I prefer to leave that off tbh it it’s good if u don’t bottom out the switch
But when I edit I press the key all the way so I’m faster with that off
it says if you spam a key you should activate it but i dont see the difference I am not sure tho didnt test it that much
Yeah just test and feel for yourself see what u like
well the convos today were fun to read
last question what about the seperate press/release sens? idk about that
i liked the dude who smashes his mouse against the keyboard the most
I just leave that off
it's sooo damn 🔥 call 911!
Ur welcome
i'm waiting too, dpd shipment should start at monday 
Oh no, hope this isn’t common?
Anyone in US get their address confirmation thingy yet?
a few people already posted warped cases. if you have the palstic ones, you can try bending it into shape yourself
no. youll get an email and youll be tagged in here if you take the role for your batch to confirm your address
Is there a YT tutrial for the Wootility with the lightbar and everything that we can cofigur?
or is there at all a YT tutorial from wooting for the wootility?
Anyone got the Linear100 springs in the lekker v2 switches?
not that im aware off. i also didnt feel like playing around with the led bar stuff^^
how do you remove a switch?
with the switch puller side of the thing in the box
you grab the switch north and south
i tried but it’s like it’s stucked
theyre in there pretty hard
yeah its hard to pull ouit
and i don’t want to force
gotta use force
Grab it like you would wack your 80he at intruder
Make sure the clips on the top and bottom of the switch are disengaged before you pull
thx i didn't want to brake it
Guys, i just realised at least 3 mistakes here on Video or on the Software for the assembly
Here in the Picture from the YT Vid you can see it,
On the Left one the| Symbol ist not on Left side but on the< > Key
In the Middle the Symbol under theN is not there but onM
In the Settings of the Wooting 80HE in the Wootility you will see thatFn 1 and R-Ctrl are swapped, if its a Video mistake or software is unknown bnut pls let me know why or how this happend
Regarding the | Symbol, it correct that the < > Key is used. The video is simply using a wrong keyboard.
Regarding the fn button, i am wondering, too. They seem to be swapped :D? I also added the wrong keycap to the wrong slot.
idk about ramp & baggage boys
but for sure cargo handling boys are not like that
sometimes things did get thrown tho
the more i look at this video the more it looks stupid 😭
this gif is just depressing honestly
bro has no safety nothing on, no airport security card
why are people like that
you wouldnt even breakdown the pmc at a place like that
maybe smth changed and it pissed him off 😂
my package is 3 hours away but takes 7 more days on the estimated time -_-
tbh that many boxes woulda annoyed me too
usps is a W
mines fedex
i wish
you can always go pick it up ;)
@clear swallow What keycaps are you using?
yeah but i dont know if its accurate
I dont want to drive 3hrs one way and it not be there lol
in the US you can always call and confirm the tracking number
Tai-Hao Smoky Quartz
if you're down horrendous the drive may be worth it >:)
Thanks
My package is 3 hrs away but says it won’t be here till the 15th
damn
Hopefully that’s a very rough estimate lmao and it shows up next week since it’s literally right here
Guys what switches/stabs should I get and what else should I do to absolutely mod the heck out of it
yeah
I’ll drive to that mf myself if I have to lmao
Are you in Cali?
what did you order
60he+
staebies
switches probably geon raws
Are you allowed to drive to the facility and pick it up?
hi,
placed a pre order for an 80he module full speced out a while back not knowing bout pre order lol.
i want to switch my order to a fully speced 60he+ module ( so it arrives before mid november)
possible?
and how quick is shipment to canada?
anyone know plz help
ps.
what switches should i use. lekker v2 (idk what the color diff is) or the gateron jade.
will be first time building key board lol
would most likely be easier to cancel your existing order and place a new order for the 60HE+ module
60HE is in stock so I think you would cancel your current order and order new
second issue is.
i have cancelled the card i originally payed with soooo… can they just do an exchange and return me the rest of the money some other way?
maybe idk
I don’t see why they couldn’t give you store credit - I would email them
thx thx
@buoyant solstice Remember I said that the the angle of the feet wasn't high enough to reach the F keys on top? Apparently I missed the little ruber feet swaps. I'm on 6 degree incline now and it feels a lot better. I don't even need the 10 degrees one
Hey boys what are some badass gaming keycaps to get for the 80he that are super gamer and badass
i dont know a lot abt keyboards but high quality pbt keycaps are usually cheap and a good choice if u have a budget
just a suggestion

No budget really just looking for the most badass esport gamer pro option
thumbtacks
yeah really put your blood sweat and tears into that game
Presses switch
GAHHH
Lifts switch
YEEOUCHHH
Hey don't play I'll sue
sue?
Yeah you know lawsuit? For wasting my time
That’s not a cause of action.
touch powder
itching powder
💀
Sigma keycaps
should give you some different key cap options
So now that the Wooting80 HE is out, has t here been any annoucements for third party cases yet?
afaik the 3d models haven't been released yet so I don't think 3rd parties have had time yet
From NL warehouse it took 2 days to reach me in western canada. It was impressive.
Hi, i have set an actuation point for my 80he keys. Does turning on "Rapid Trigger" 0.15mm for example override the actuation point's limit for example 2.0mm?
Helps provide justification behind the expensive shipping to western Canada.
With the zinc case = pretty bonkers. Ordered to mailbox across the border instead. Twas free shipping… just need to wait a bit longer it seems.
I really want an 80HE. It will save more space on my desk compared to my apex pro full, and also that I get much better software
then get it :)
no
two more months till my turn
Did you check wootility if you’ve dimmed it by accident
Otherwise I’d contact support
with the high speed tachion mode or whatever, is rgb disabled?
It turns off after idling
so rgb works with it on? I heard rgb is disabled when you enable it
The effects I think
Yes but you can have only static rgb
oh
thats fine, i just want to be able to have some rgb lighting to keep a good aesthetic
fine if its static

When should the keyboards be arriving to the Vegas warehouse?
early this coming week
why doesnt wooting 80he have the strap that the 60he has
Not as functional or stylish on the bigger keeb. On 60% makes more sense cause you’d carry it that way
okay makes sense thanks for response
hello have a good day to everyone
Do yk if it arrived yet in America? Clicked the tracking link and its showing me a cargo that's going to Taiwan lol
i got a 80he cus i dont mind waiting but the 60he looks so cute



