#nms-corvette-discussion
1 messages · Page 70 of 1
After I finish building the ship I gotta go on a spree for salvaged data so I can buy more decorations and properly mimic the original ship :3
it feels a bit empty as it is rn
doesn't have the same feel as the one I wanna make, since it doesn't have the railings in the deck, or the sofas, the panels, and whatnot
Does anyone know why I lost half of all my ships especially my expedition ships I lost all of them except for the living ship the latest one
At first, I was like you, but it makes sense to earn everything that way the game doesn’t get boring because after you do the story and all the other stuff there’s nothing to do you basically just have to wait until the next expedition so this will tie you over until then you know👍😁
EXACTLY!!!
i am straight giddy from this 95% done
One message removed from a suspended account.
Hiiiiiiiii~ I need help figuring out what this bit here is, in the underside :3
I can't really tell what pieces those are
engine cover
For what could you possibly need that big of a Corvette for (splendid sir )
On it sir
Why well of course as by the evidence of the big skull of a beastie i found and poached in the name of her Majesty Queen Elizabeth the 777th to hunt big beasties good sir
and i plan to expand it
That checks out thanks for your answer
hehe. it might sound like too much and a pain to navigate through BUT...
- i made sure the ship will be really walkable with dedicated corridors staircases and lifts
- staircases are in a central position, meaning i have quick access to everything
- thanks to the deck hatch, i can just jetpack over to the main deck and enter the bridge really quickly. i do not need to go through the whole ship every time
- while the deck hatch can also be used to get out of the ship fast, i also have the secret hatch that's hidden right behind the engines and it's really close to the cockpit, giving me a really fast exit when i'm on space stations
i planned the shit out of everything man xD
Well Mitey shall just brace for the LAG that will ensue. just wow
still sir you are a GOOD starship engineer 🙂
I will do my best to remember not to go to the anomaly with it xD
thank you ^^
I want the reward for BAD starship engineer
well I would say you are well on your way..
❤️
Forget bad engineer, how did you throw 2 bio-domes on that thang??
rotate on the axis, use a thunder or titan hab so it can poke through the floor but you can still walk on it and still select Harvest All Plants
Awesom 🔥 thanks
Wdym?
Fiddling with another ship but you cycle to a different axis until it's upside down then place it againstthe bottom of a hab or so
it'll poke through the bottom of any habs above it, usually clipping through the floor but as long as you have enough headroom (like with titan or thunder habs) you can walk over it and you'll still get the harvest prompt
are salvage crates the fastest way to get the modules? I know you can trade for what youre looking for but u still need some sort of module to trade
honestly? it feels like it needs 1 more lvl at the bottom
but holy shit those legs

I would but it was originally built w just glitchbuilding. I f I add it now feels like out of proportion withthe other stuff thats in place 
it's simple. rebuild it from the ground up
it's "fun"

Tons of fun
how do i prevent the installed modules from scrambling and switching places randomly in the corvettes i'm currently not using? do i have to sort everything over and over when i wanna call another corvette?
my current design im working on
Is this normal? Lol
I run into this too, managed to figure out the reason. It's when you log out with a different ship than the one whose modules you wanna keep intact
so yes, you'd have to sort it every time. Only way to avoid it is to have the corvette you want to keep sorted as your primary ship when exiting the game
Howd you get the skull on the ship
just curious here. how does your ship do in civilized systems? does it lag with that biodome attached to the bottom?
nope, no lag
not for you maybe.
I can't speak for others - only ships I see lag on are the giant sailboats and megacorvettes in the anomaly
i noticed this too, during a session it keeps the modules in place when switching ships but after restarting it only keeps the modules from my active corvette. its pretty annoying and i hope this gets fixed soon!
was hoping for a trick to save it permanently
nice picture i got with my corvette
interesting design you have
I thought I read somewhere that corvette parts has been increased from 100 to 160 ?
Are there any people that are good at decorating? I need help decorating my base and my Corvette.
No, it was the corvette cache cargo slot increased to 160 from 120
Could this be possible to build
Probably yes, it likely won’t be a perfect replica but you could get something close. The only obstacle would be figuring out where to put the cockpit
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
Yeah
-#
Recurring channel reminder 
Corvette discussion? 
-# ⠀
NO image "dump and runs", bad!
-# Images not part of a discussion may be
deleted. See
pinned rules »
#nms-showcase-corvettes is where to show off your corvette »
Would probably need to partialy cover the cockpit with parts
wrong reply =w=
What is base builder
Whenever I turn autopilot on in atmosphere
I posted this already but the pics were horrible and you couldnt see it so here it is, my Blockade Runner corvette Inside is a ton of storage and a bunch of nip nip plants as well as some of the utility modules. Still a work in progress but i think i like it so far
Don’t forget to make a back up save you don’t want to have to start over if the game crashes and it looks awesome by the way
One message removed from a suspended account.
how do i remove items from the corvette cache inventory?
does anyone have a tutorial on a ship, it looked kinda like a C shape, with the cockpit in the middle inside of the C, the ends of the C were pointed too, and the cockpit kinda raised forward and up at a slant
i saw it yesterday but lost it
I’ve been wondering the same thing
hover over and press X I think
sadly doesn't work
Im sorry but.... HAHAHA. This is the second time I've seen someone report that; first time was a gek statue lmao
It's a bug; those items are stuck there forever
!hg
Submit bug reports, suggestions or feedback to Hello Games here: https://hellogames.zendesk.com/hc/en-us/requests/new
Lmao what's stuck in your corvette cache? I find the random assortment of items amusing
thats honestly a hilarious bug
I'm sure it'll get fixed. I think the game is depositing items there if you're in a station and your inventory is full, but I haven't actually tested that
have the same here .... corvette cache is blocked ... has items, no counts and you cannot get anything from it ...
any ideas on how to make the walkway area less blocky?
Place a radiator or smth
On top
Cant do anything about the sharp edges unless you clip some stuff into it
And it might block the insides
I can't really put anything on top
maybe something like this on the sides, not sure
that works
Fat is beautiful
but innacurate
Well, you'll never be 100% accurate anyways.
wheres the bulb at the back?
No little R2 unit bubble
I don't carry a little yoda with me
It is too fat
You could just extend it by 1 block
Or remove that cowling
is that using glitch placement?
what about this
which part
i think if you axtend the thin tail with random furniture items it'll help making the ship look more slender
I can't get the antenna horizontal
the middle bits, seems like something you couldnt place normaly, maybe im just dumb tho
seems so yes (to the first part, you're not dumb)
Yes, you need to off-set by half a block to the side
i see i see
Grrrr I wanna try to replicate these decorations but I have NO idea how they managed to perfectly align the barricades and other stuff ;;
with a cargo link
In the station go to an empty slot in the ship, press X and choose the corvet cache symbol and take the stuff this way.
I will try this later! Ty!
Isn't there a round cargo part that'd look better than the link? Or that round shield part?
👁️ 👄 👁️
Who made this corvette?
no, it's the best part for it, others don't look good
Thanks
It's soooooooooooooooooo cool
i hate making a decent back end on a ship and then not having an idea for the front lmfao
well that doesnt look bad tbh
It's Nice
i cant ever find a design that i like with the damn cockpits so i usually hide them all
It's a good idea
i just want a ship i can fly in first person and enjoy lol
-#
Recurring channel reminder 
Corvette discussion? 
-# ⠀
NO image "dump and runs", bad!
-# Images not part of a discussion may be
deleted. See
pinned rules »
#nms-showcase-corvettes is where to show off your corvette »
that was me when I was working on this, still not satisfied with the front I came up with unfortunately
thats so sick
thats old
i wish we could choose primary and secondary colors
It's a nice start
the parts you use always look so good together
Do you know there is a bug who can reverse all the part?
it ended up looking like this when I completed it last month
see that looks great
thats the only cockpit i like the look of tbh and even still its hard to build without slapping the vespers on it
rn im focused on polishing this
i love how as soon as corvettes came out everyone decided that they should be triangles
Man.. I can really see how much better I’ve gotten at shipbuilding just by looking at my animal-inspired corvettes 
Each one I made taught me something new
what does it look like from above? the engines looks huge
I think it's more simple and cool when it's a triangle
these are funny
I like it
I rellau like the 3rd picture
The red
its more engine than spaceship
won't lie, it's funny how literally you can take "polishing" in this instance
all of those are great lol i love how the duck kinda looks like its shooting out its toes
Yeah that’s my newest one, a recreation of the Cambrian era G.O.A.T Anomalocaris
its the chrome lmfao
Really cool
Oh my god I never thought of it like that 😭 now I can’t unsee it
TOETON CANNON
yeah, it's why I found it funny 
i'm sorry.
no actually, I literally can't polish it cause the paint is already polished 
The nose of a ship is always tricky for me. Never know what to do if I'm not using offset wings
Like my dropship. Amazing rear, questionable front.
what if the bottom isn't yet 
what if the front had some kind of things like these on the sides at the front ( but not on that huge scales obv, smaller ones)
so its funny you said that cos i tried flipping the s wings for that effect. it doesnt poke out nearly as much as id like but thats what i was going for.
try using vesper diffusers upside down
this is the inspiration
I think it's probleme for a lot of player
see i tried that too but it just seemed so.. empty. if i could rotate them juuust a tad id totally use those
you could add a bunch of things to connect them, like a thermal grill upside down
with some light scaffold for the iron bars
things like that
you can offset some parts into the cockpits and still be able fly it in first person with little to no obstruction
you got a pic of that? i was thinking of doing this with the lower half of the tbird cockpit
I'm sure you can find other parts that will work for you
the part I used cups the lower half of the glass portion of the cockpit
If I could move a diffuser up into the lower half of the cockpit and still get inside, that'd be great.
Problem is, I'm pretty sure it'd cut half off the entryway.
some parts eat up the dash and I can't see over it but you'd be surprised what you can get away with
like these
well those circled things arent blocking the view but what about the front? or is that lower?
well ill be damned.
Finally I finish my corvette
mm i cant seem to get those two to face each other
I hope there will be in the futur more corvette part to can do more detail in the front T-T
im sure there will be
Trying to make a galran battle cruiser rn
Good luck ;-;
do i need to make the red eye bigger or is it the perfect size rn?
I love you corvette
Yes but it's really cool
Thaanks
-#
Recurring channel reminder 
Corvette discussion? 
-# ⠀
NO image "dump and runs", bad!
-# Images not part of a discussion may be
deleted. See
pinned rules »
#nms-showcase-corvettes is where to show off your corvette »
More photo
oh wtf
nuts
I am agree with you
Oooooo goose bumps. Love it
Thaanks guys
are you off setting them?
@limpid karma here?
yeah im sure ive gotta do some messing aroudn to get it right. just doesnt want to do both
try putting hubs or other parts outwards first
I use djmonkeys base builder app but you can use blender too both work
So no not modded
wheres the cockpit
yeah i tried top and bottom anchor points. im sure ill end up doing it on accident before i figure it out on purpose lol
how do you fly it
also it might be better if you remove the cockpit first
that i hadnt tried. ill try that when i get back to that bit
Its 5% of its original size so its really small and floats inside the cockpit that i built
Someone know what are this strange part?(I never install mod)
I placed chairs on the inside so you can sit to get in and out, the rest is like any other ship
wheres the getting out chair
round part? Possible new unrelesaed piece someone found in the game files.
Also on the inside but facing out against the wall, because when you get up from a chair you step forward and you can use that to clip through
Yes probably
Above the ship
yeah those side pieces are new. at least 3 new corvette pieces must be coming soon.
I accidentally glitched some parts onto my corvete...under the floor, a bit deep. Any way to delete them? We still have no way to edit corvettes in space? 😅
No we can't edite them into space
Rip
Try to reset your save
you mean old saves? i have many backup saves but apparently ... these parts are old too. 😅
Your last autosave or manual save before you done goofed and broke your corvette by placing a part underground.
yeah as I tried to say, wasn't recent 🤣
It's not broken though.
just...has extra stuff now 😅
just...?
Please say to me there is no problem🙏
uglier than it already was lol
Burn it down. Start over.
yes we do, wrong channel, lol
im sure we'll figure something out, thanks. 😅
NO U 🙂
I have. A lot.
This has been like a 2-week build of a dream ship lol. At worst I hope there's a save editing method. Either it get fixed or the tumors stay lol
Your tumor is going to stay, sadly.
Don't think you can edit parts of a ship with the save editor, and unless you backed up your saves, you're kinda SOL.
time to become a modder lol
base in corvete
Now it's really finish
Very cool
ty
why can I not remove my Photon Beam module from my corvette when I dont have it?
Need a fix… my corvette bay door keeps locking somehow
I get stuck inside every so often
A quick note about those rounded save-edited pieces... we can't be sure they will be introduced.
I don't think so to be honest. 😅
Perhaps a new iteration of it. That one isn't up to the standards of the ones in the game. You can see there are a few rough edges on the modelling and texturing...
Wait how do corvettes land on atlas stations
is there any channel or place for corvette show meet ups?
Like freighter docking: they don't.
Ah
Yeah it's really odd watching your corvette coming to a stop, land on nothing, and then teleport to the atlas station lmao
There's a separate server that hosts them, if you want u can send you a link in DMs
At least they have a cool atlas-styled teleporter
Hey new color
-#
Recurring channel reminder 
Corvette discussion? 
-# ⠀
NO image "dump and runs", bad!
-# Images not part of a discussion may be
deleted. See
pinned rules »
#nms-showcase-corvettes is where to show off your corvette »
Hell yeah
... Mamba?
Do you guys have an example that's more advanced than the flying boxes i end up making that I can create from the basic purchasable parts?
I need practice but I don't have all the parts from the cool designs y'all are posting
You can turn on free crafting in difficulty settings to gain access to all parts
Yes but I don't want to make something I can't keep i wanna upgrade it over time as I find cool stuff. just need a cool exmaple to start from
fair enough
that moment when your ship modules gets rearenged and changed FOR NO REASON
ffs. i can live with the rearengement
BUT WHY DO THEY ALSO CHANGE??
i had 3 long hab in the technology tab and i didn't remove any of them. i actually added more
and somehow, one of them got replaced with a walkway
oh and i just noticed that some of my technology slots are missing....
yes please
Rip
Mm... wondering where would be a good place to slap on atlas decals as kill marks.
thank you
@lunar thunder if you just wanna practice just use free crafting also u won't lose the ship you build even if u turn free crafting off
Have people noticed real difference between a corvette with max 100 parts and a corvette with fewer parts?
In what sense?
She's doesn't bite i swear👀
@signal tree sent DM
handling, pulse speed, etc?
I've got my main 100 parts corvette and I'm considering making two more... One that's all speed and offense for hunting sentinels with the phase beam, and one that's just a silly little guy for fishing
so for my sentinel one, I really will want to cut down on parts number.
Best corvette weapon and how many can you have that will increase your damage?
IMO the phase beam. Stick three on your corvette for biggest boost
but cant you add more then that im getting 5 firing at once on my corvette but do more weapons = more dps?
It caps out at 3. Once you have 3, it may show more firing but it's not adding to your DPS
ah got it
I recognize that first ship, I also built one
How many ship parts can the game render at once?
the complexity limit cus u cant add more
which seems more pheasable to recreate as a corvette
first image or second image?
2nd is more easy to do
But 1st is doable too
Theres an robotic arm deco for those front arms
ooooo
theres a ship i reeaallly want to recreate but corvette parts arent exactly round
namely this beautiful work of art
the Arcadia Class Jumpship 🤤
however i dont think itd be possible because im not exactly sure where u sit in the thing
There any way to get rid of the Photon Cannon? I'm using the Cyclotron and can't pull this mod off of the ship =/
can just do an internal cockpit
You'd have to do 3rd person flying exclusively tho
you can do that? gnarly
i already do that lol, i like admiring my ship
yeah, 2 of my ships has an internal cockpit
nice
Its buried 
lol
example
Made some improvements to my anomalocaris ❤️ ❤️
I finally figured out a good shape for the two limbs at the front, so now it’s easier to see them + is closer to what it should look like
this is super possible btw
yah i already saw a reddit post
idk how id do it, but i know i dont have nearly enough parts lmfao
automod gets you
does it really?
try it
-#
Recurring channel reminder 
Corvette discussion? 
-# ⠀
NO image "dump and runs", bad!
-# Images not part of a discussion may be
deleted. See
pinned rules »
#nms-showcase-corvettes is where to show off your corvette »
dumbest automod ive ever seen in my life
especially for what game this server is about
pretty sure that ship is glitch built
the sub didnt mark it as glitchless
ive been slaving over it for abt 3 days now
@sinful light How about you don't bypass the AutoMod filters on this server if you don't want stricter moderation actions as the AutoMod message told you?
...youre aware that doesnt mean it cant be glitched
sorry
i wasnt aware it was an automod thing as i usually type it as skissue anyways
now i know
so
:P
@upbeat gust Same applies to you. Yeah? We want to keep this community as helpful as possible, without the nonsense memes, especially when another player has a legit question and/or issue.
why is it not allowed?
i dont get it
yah im aware, i didnt know it wasnt allowed prior until it was brought up
chillax
It's usually brought up when someone wants to be "funny", while another player is asking a legit question. We mostly want players to feel welcome, regardless of knowledge or skill in this very chill game.
thats it?
For further questions about moderation or rules, #contact-us.
Let's move on to discuss corvettes, yeah?
i do think it may be a bit over the top
however this channel isnt for this topic
i think i get it
i make a da voyagers box art a ship
whoa! this is so badass! 
love it!
Siickk
how long until they add actual square vtol thrusters
i want ship parts of various styles, like living ship parts
theyre far too small for my liking
or sentinel ship parts
it'll be cool seeing how creative HG gets with more parts in the future
i think we should focus on getting more parts that match whats here first
fair
i mean its kinda stupid showcasing a ship that requires glitchbuilding to come close to for the update
i wish they hadnt done that
well, it's still awesome that players can still get pretty creative with some of the building restrictions
i bet some of those guys with save editors could do it
Save editor won't help you to recreate that ship
true. some players using Blender can do wild things. but i've also seen players on console build the most amazing creations -- especially with bases. 
why not
if i could do it
without
The parts aren't in the game. That's why
okay?
i think they could do it
they can resize corvette parts
itll be a lot closer than what i made
Cockpit, where? Thrusters, where? Okay.
you did see my picture right?
Doesn't resemble the promo poster ship much.
I wanna try to replicate these decorations but I have NO idea how this person perfectly aligned the barricades ;;
https://cdn.discordapp.com/attachments/1411919451724582933/1425541300618399827/desert-hovercraft-v0-ovlwhlo0orqf1.webp?ex=68e7f64b&is=68e6a4cb&hm=64ab77722e93a43a925f7c200d43c870ff90f73fb4c9a4ee474b8f9f3dc8723f&
https://cdn.discordapp.com/attachments/1411919451724582933/1425541300979236944/desert-hovercraft-v0-qb7gh7mwnrqf1.webp?ex=68e7f64b&is=68e6a4cb&hm=7a077fa6dc52df15bac8ae39614bb594b449fe378368256c376d47f7250b1363&
a lot of people seem to disagree with you for some reason
So?
i guess you just dont have that pattern recognition thing as good as 10 other people
lol, okay 😂
Anyone got any ideas or tips? I need help ;;
i dont like the way it looks either but hey its close
and other people besides you think so
you just gotta freehand it
good luck
:(
yeah
does anyone have any like, really small corvette builds?
-#
Recurring channel reminder 
Corvette discussion? 
-# ⠀
NO image "dump and runs", bad!
-# Images not part of a discussion may be
deleted. See
pinned rules »
#nms-showcase-corvettes is where to show off your corvette »
1x3 hab space
Hahaha I’ve got a corvette that is literally just a cockpit, does that count?
And yes it’s fully functional
Even has a bunch of tech inside it, got a portal, save point, refinery, planters etc hahaha
Got another one that’s pretty small but has some massive deco parts to make it look like a weird living ship 🤣
This one’s just a cockpit and docking bay 🤣
I said screw it and just made mine a junk hauler xd
OUGHHH I LOVE THISSSSSSSSSSS IT LOOKS SO COZY
One of these days I might find the motivation to build another one of these
Since i build Corvette ships give me something to try to build challenge of no glitch and exploit see how well i can build it
How do you delete a corvette
Save editor or trade it for normal starship and scrap that
Ahh alright
dang cool dude, i really wish u could make super sleep like fighter jets of sorts
AT-AT from star wars
Can someone design something like this for me
Ight bet
Aside from aethetics, there any point to having more than 3 engines on a ship?
Glass Floor
this is a bit of a mix. Trying to create a space station that allows corvette docking in the way of using the transporter beam. However no base part surface seems to trigger as a "beam to" surface. Then it occurred to me: what if someone tried to create terrain with the terrain tool. Has anyone tried this?
My USS Enterprise NCC-420 lol my version haha
can i not install a cargo scan deflector to my corvette?
Absolutely 🔥
Boldly go.
It needs a name any suggestions? Lol
Welp, I tried.
Any name that isn't anime-ish or gundum themed just wouldn't fit
Facts lol
Love, Death and Robots style name too
So do you got any suggestions for a name for this thing lol ?
LDR Name: Buttercup IV
Anime name: Crimson Aegis MG-47
I built my corvette one hab too high, but I can only put the landing gear on the ground. What now?!
what is this?????
Planetary archive
don't know if you still need this but... try placing the landing gear beneath the ship, delete the extra lvl so there isn't anything on that row between the landing gear and the rest of the ship, and even though there might be a big red unconnected part of the ship, double RMB to exit the menu without saving. then try to resume and see if the upper part dropped by 1 lvl
i'm not sure if this will work or not. all i know is that something like this happened to me once, where my whole ship moved down by 1 lvl because there was nothing there
but i'm not 100% sure on how to recreate it
Thank you very much, I will try this
But what do you mean by “double RMB?”
ah. you are on console the RMB (right mouse button) it's the key to exit the building mode
just use the key on your controller to exit the menu, and when it asks you to save, press it again without selecting anything
and then go back and hit resume
How to make the Girder Arrays clip like this? Trying to follow a build guide but the person did a REVERSE build (they just recorded themself dismantling the ship than reversed the video so it looked like it was building instead) and so I have absolutely zero idea how to get some of this stuff to connect the way it was in said video cus they didn't really explain any of it
It's like they're seemingly just not attached to the grid, they're OVER more than they should be
Straddling the line between two spaces
place 2habs on top of eachother, plase a rotated stair in the bottom one, delete the hab (the stair will stay), plane a new hab and make sure it's rotated to 180 degrees following the stair's orientation, delete top hab, place reactor on the 180° hab and that's it
edit: nvm. i misread
The trick is to offset them. What you need is a walkway, a rock hopper wing module, the single one, and any small thing like the vent, intake, etc.
With the small Rockhopper propeller wing, if you try and connect it to a walkway on the starboard side of your ship, it can connect 5 places instead of 2. Halfwidths of a block in the snap grid.
You place the rockhopper on one of those half widths, then move the walkway that halfwidth attached to the rockhopper. (You can delete the rockhopper wing by this point)
Then with the small vent, you attach it to the side of the direction you want to offset to.
And move the hab around said vent so that it attaches in front instead of the side.
Congratz, that's how you just made a lateral diagonal offset. Now as long as you don't remove that walkway, you can attach to those halfwidths
see above
If I pop into one of this server's VC's and I stream, do you think you could walk me through it? I've just read that like 5 times and it's just not clicking (I can't learn stuff for crap through reading, gotta see/do it for it to actually stick)
((Yes, school was hell))
sure
hi guys! i wanted to build a corvette in my main save, how can i obtain the parts to do so?
i completed the expedition on a different save
i'm sure this question has been asked a lot but i wasn't sure where to look to find the information, sorry!
I just bought the parts
ahh ok, so if you go to the space station u can just go to the corvette docks and buy things?
Yes but theyre very expensive
yeah...
I got this ship ais gifted that sell for a whole lot i bought them from the money i got from that stuff
also there are so many other types of parts that aren't in the basic modules section, do you just have to find them..?
omfg
You can trade for other modules at the corvette station.
the grind begins...
Salvagable scrap planets are good
Have fun
i never seemed to have valuable enough parts but i'm sure i can afford to buy trading items on my main :p
ok, will take a look!
-#
Recurring channel reminder 
Corvette discussion? 
-# ⠀
NO image "dump and runs", bad!
-# Images not part of a discussion may be
deleted. See
pinned rules »
#nms-showcase-corvettes is where to show off your corvette »
Is there any way to exceed the complexity limit on console?
Not that I know of for console.
PC can use mods etc.
Damn 100 is just far too little
you'll annihilate performance going over 100
I've heard a lot of MP people complaining about others with modded >100 corvettes killing their frame rates
You can kill frame rate while under 100 parts too if you fully flesh out your ship's interior.
Does the Interior render props if you're outside of the corvette
How do i make the damage potential higher on my ship
Not necessarily when you have a good enough machine
Im not saying you should bring it to MP but if the build's for yourself its fine
Even 300 is fine
my build is 300ish rn and i only lose 10fps-ish looking at it
find a planet/moon with salvageable scrap
You cannot buy advanced modules
The ones that are avaiable in the shop is the basic stuff
Following on from my circular Corvette video, I now bring you vertical Corvette circles! This video will show you how to build three different variations of circles, and explains their various advantages and limitations, as well as ways to fix certain problems you might come across.
No Man's Sky (NMS) is a procedurally generated space explorat...
can i upgrade the corvette modules, like have a A class like weapon module upgraded to class S
It's the most good Super Destroyer I have see in the game
If you are referring to the technology modules that are provided by parts used in building a corvette, no. These are simply A-class, but they do not conflict with normal technology mods and can stack an additional bonus for some tech. The only real concern is inventory space/capacity cuz I don't think you have enough room to literally install everything with them.
As a side note, if you are concerned about inventory space for technology, I have heard a method of building a minimalist corvette and then installing all the tech mods that you want before editing corvette to the actual build size you want. If you do it this way, there is no room for the aforementioned A-class mods to be installed, which allows you to prioritize what you want.
I try to assemble this too corvette part in symetrie but It's don't work can someone explain to me what is the problem please?
The parts are too big and would overlap. If you are going for symmetry, you could do 2 habitat modules side by side and put one of that part on each habitat module, or do 3 wide and put the part on the outside 2 habitat modules
3 wide (or any odd number) would allow for a centralized cockpit
If you are comparing to anything built by another player, always be aware that there is always a chance they are using glitches/mods/save editing, so the results you get are not always possible unless you do the same thing they did
But I also do notice that they flipped the part so it becomes one shape, so that is an additional difference in what you were getting with yours
Yes, that's true, I didn't think of that
It's difficult for me to understand what you say I don't speak english
For an example of glitch building...if you look closely at that specific part, you will notice the turret stucking out of it. This means they were building parts where they should not normally be allowed
Mmh
What I had meant was that in the other person's picture, the part they built was flipped (mirrored horizontally) so that the 2 parts actually became 1 single shape on top of the habitat modules
what that person did was to offset the sides. and instead of sticking to the side of the hab, it's now sticking in the middle of the hab and they do not take the same space
it's also offseted
by half a hab
I'm not entirely familiar with this method so I wasn't going to start saying stuff I don't know 😅
I've heard of it once or twice tho
normally, those sides would be like in the right drawing because they are sticking to the sides of the hab
but they are offseted to stick to the middle point
The part I don't know is how to offset
I am honestly a pure-vanilla player so I don't do glitches or mods or look for ways to do stuff I shouldn't. My stuff snaps where it snaps and I accept it 😂
.....
It's complicate for me😅
to offset jt like that you need to actually use 2 glitches.
- rotate a hab at 90 degrees using the window free placement mode
- after the hab was turned at 90 degrees, use the small hover rotor to stick it to the right side of the hab. that side has 3 snapping points, left corner, middle and right corner. just move the rotor to one of the corner and it will stick half way outside, then pick up the hab and move it to the center of the rotor and done
that hab is now offsetted by half a hab to the left or right
back to work now
Thank you for try help me but I really don't understand what you mean it's to complicate for me😅
Good luck
Easy* results may vary :D
Glitch Buiding 101: https://youtube.com/playlist?list=PLtEkv9goKa6DpIrN4k9hR08uHimeiMELJ
Twitter: @criscrosaplesos
#nomansskybasebuilding #Glitchbuilding #Building
__________________________...
Learn the Offset Building techniques for Corvettes in No Man’s Sky Voyagers!
These methods are a must-have in your builder’s toolbox, giving you the control to move corvette modules in ways the default snap points don’t allow.
This is a technique-only guide — no finished ships, just clear explanations of how offsets work, so you can ap...
it's these 2 glitches combined
One message removed from a suspended account.
Someone on Reddit made one a couple weeks ago
If you can imagine it, it's either been done or at the very least attempted.
One message removed from a suspended account.
One message removed from a suspended account.
One message removed from a suspended account.
Never seen it but the design is very cool
-#
Recurring channel reminder 
Corvette discussion? 
-# ⠀
NO image "dump and runs", bad!
-# Images not part of a discussion may be
deleted. See
pinned rules »
#nms-showcase-corvettes is where to show off your corvette »
i wish the spotlights on the space stations didn't blind me every time i land
or go inside the corvette to check how it looks
insert My Eyes gif here
corvette design is so buggy rn. I tried to change modules and it told me "all parts must be connected" and for some reason it decided that 2 holo displays I put on the wall are not considered connected
also I cant place any base part on the last whole hab width of the ship
Thinking I'm going to rework mine from the expedition cause it's kinda a chonky ball... there any guidance on the shield modules?
And can we rotate generators?
what I noticed last night was when I deleted a wing that had a decal applied on the wingtip, it would count that decal as needing to be connected
You can with glitches
its weird that they made it so we cant rotate half of the things
btw if someone has time, plz put an electric cube on your corvette and try picking it up. mine cannot be picked up
First attempt at a bigger heavy class ship i think I did alright
You think that's something HG will add in? Cause I'd love to be able to incorporate the medusa generator... but not necessarily in it's default position....
IDK, suggest it at zendesk
The glitch to put them backwards isn't hard if you want to know it
!hg
Submit bug reports, suggestions or feedback to Hello Games here: https://hellogames.zendesk.com/hc/en-us/requests/new
Done
Only special people can get Gunter to speak.
Any figured out the stats and class of the corvette parts... or are they all random?
wait really??
try it again
!hg
Submit bug reports, suggestions or feedback to Hello Games here: https://hellogames.zendesk.com/hc/en-us/requests/new
!hg
Submit bug reports, suggestions or feedback to Hello Games here: https://hellogames.zendesk.com/hc/en-us/requests/new
Guess it's working now

!gekmilk
🥛 🍫 🎵 Break me off a piece of that Gek. Milk. Bar. 🎵
🥛 🍫
Any idea what parts I could use for this big, vertical wing, I used stacked streamlined trims, but I was wondering if it could look smoother than this:
Sadly no, with vanilla building its not possible, however using glitch building you could experiment more with other pieces
is it just me or everyone gets bugged when trying to enter space station or anomaly with a corvette
In what way?
i think the game counts my corvette as some other class of ship
so yeah when entering it literally phases through the whole station or anomaly
Were you processing items in the refinery?
no
Odd...
it was okay before the last update
Try enter it with another ship, summon your corvette inside, go out and try again?
Obvious question, have you tried to just restart the game? Maybe something just got weird and it has nothing to do with anything
yeah tried it already
lemme see
Fixed
thx
Another question, how I can make this vertical wing even higher (are there any corvette glitch building techniques to bypas the limit), the current one is one module higher than the one on the picture?
oh thats from jedi surivor
Anyone else have problems fallout of the windows? I banked left the other day and my buddies were sent out into space
Here's mine before I reworked the engines
Very nice
Mines based somewhat on halos short sword fighters and pelicans
I was just vibing when I built mine... deleting the storage area helped flatten it, a lot of the original design ideas are still there, amusingly
I need an idea for a cool corvette
I built a razor crest but meh
It's alright IG
Shiny and all that, but from a tutorial
could always start with an idea on what it should have, and build from there, then just work with it
Then I made this because I didn't like a tutorial
Though, older pick bc I use the legged landing gears on the side now
T Bird landing gear I think?
And here's the original that inspired me
You can kinda see where I took a razor crest front and modified it
I'm really curious if anyone has the same problem as I though of clipping through the Corvette while in space or trying to sit in a chair on it
Sometimes.
-#
Recurring channel reminder 
Corvette discussion? 
-# ⠀
NO image "dump and runs", bad!
-# Images not part of a discussion may be
deleted. See
pinned rules »
#nms-showcase-corvettes is where to show off your corvette »
Sometimes I have this issue where I'll be flying right?
Then my ship will hit something in the nothing
Is that the Atlas trolling me?
nah sometimes i like to just put invisible stuff all over the universe using the atlas
Hmmmm
That happens to me too
IG space has more rocks than meets the eye
Mainly when exiting atmosphere
It's more in space itself
Not to mention, the guns in 1st person on a corvette are bugged on Xbox
They don't fire N sync
Yup
My main concern though is the clipping through the ship
It's made the Corvette unusable
Fine fine fine... I'll move the post... stupid bird >.>
It's a blue white and black Pelican
It can go over 1000 LY
Which isn't crazy, but I mean it's a decent range to jump
I set out to have the junkiest interior for it
And on closer inspection, you'll see a ton of loose wires
Mines fast as fuck from all the engines on the back 🤣🤣🤣
Did you know that corvette and regular ship tech modules stack? You can have 3 of each if you can spare the slots.
Yes
I'm well aware of it
I've been abusing the Adjacent slots like it's tetris
That's beautiful 😂
There's really nothing wrong with 1000 LY range but it is pretty low for a corvette. Not that there's much reason to try to optimize that particular stat though
Like the old star wars quote. "What a pile of junk,"
Yea
Nothing crazy with ship stats
I know we have to finish corvette mission with one. Can I do the side mission thing to find a sentinel? Then call it to SS to salvage it?
I don't think there's any way to own a non-corvette ship if you're in the expedition
You literally cannot get a ship from the expedition unless it is a corvette
tyvm won`t waste this time ten:-)
The sentinels remembered they could lock their ships
Thankee kindlee
Wait, why 6 reactors?
Hyperdrive range
One of them extends it by a hundred or so at a time
figured those were the only ones worth having.
The other ones boost other things
im new to all this. Just getting into ship building
Each reactor type has its own cap of 3, so they don't interfere with eachother or other items that boost the same stats.
Like launch boosters and such
The Medusa reactors boost the cockpit/bridge depending on your ship layout
I'm pretty sure the recharge aspect of the azimuth reactor doesn't stack though, not with eachother or with the landing gear that does the same, so they make the landing gear tech entirely obsolete. The azimuth still has stats that you may deem useful though
Not that I land with my corvette anyway, faster and more fun to just jump out 🙂
I love watching it come down to get me.
that landing sequence.
hate the landing gear options. Looks-wise
That's true, I do like that part too. Feels like home is coming to me!
I'm a big fan of the heavy thruster landing gear, but they certainly only work on a small subset of designs
Fancy gold!
7 full habs
So big! I only have 2
it's pretty compact tbh.
What do you use all those habs for? I feel like I can fit everything I need and more in just two
Ah, never been a fan of walking to cargo containers, I added mine to my inventory instead so I can access them everywhere
is that only through the frigate though?
Yeah, you add the upgrade to your freighter and cargo becomes accessible everywhere, even when not on or near the freighter
I have two cargo piles on my corvette too, but they're only for looks. I never interact with them
hah bet.
Using the titan hab in the bottom has the industrial look
Where all the cargo and tools are
-#
Recurring channel reminder 
Corvette discussion? 
-# ⠀
NO image "dump and runs", bad!
-# Images not part of a discussion may be
deleted. See
pinned rules »
#nms-showcase-corvettes is where to show off your corvette »
So what's the rules on the reactors? No more than 3 of any type?
Yep, that's the rule
Medusas are a little special. Same rule but the cockpit can get in the way depending on the order of placement
how to remove the photon canon from corvette
You cannot at this time. Perhaps in the future?
Any cool corvette designs using the ambassador cockpit?
oh oke
turtl
I'm obviously biased, but I think mine is cool. 🙂
Ment pictures xd
looks like a frog
It's cool
I don't think I really work the ambassador cockpit in all that well. I do think it fits but it doesn't really lean into the distinct shape of the ambassador
I suspect the ambassador would work really well for more organic bird-like spaceships
Yes
I suppose mine has some sort of organic feel to it too though. I haven't had anyone call it a frog before, but my friends call it turtle or bee, depending on which color I pick 🙂
woah whats that peice behind the engines?
It's a ceiling lamp, you can find it under decor
Yup
A little tricky to get it concentric. But a cool highlight
Light makes a huge difference, use it wisely 🙂
i havent tried any fancy little build details on my 'vette yet
This is like my 4th vette design. This discord has a lot of stuff in the other showcase channel.
I just keep adding to mine, I suspect it may never be truly finished 🙂
Can confirm it works well for bird ships
Ooh
That's good! I do think I got it to fit reasonably well but the main reason I went ambassador isbecause I like sitting in it. Such an open view!
Very cool
very nice
ok i might be absolutly crazy, but is it just me or are the thunderbird and titan cockpit models switched around
Getting the wing shape sucked… took like an hour but was pleased with the result
Not the only thing that is switched around. The thunderbird and titan landing bays are also reversed in style
ok i thought i was losing my mind lmao
it seems like such a hard mistake to make i gaslit myself into thinking i was wrong
I think those two styles fit reasonably well together though. Ambassador is way further from the other styles
yes but i walk into the "titan" class landing bay and i see snaking pipes and am horribly confused
are there any images of dev corvettes? I'm wondering what they imagined when labeling parts like 'arcadia' or 'titan' or 'ambassador' and what a full 'ambassador' corvette was 'meant' to look like
i think the part names are more to tell you what peices line up
like the speedbird peices
There's this poster in game that might show off at least one design made by a dev:
the community really pushed corvettes a long way huh
I find it odd that the 'ambassador wings' don't really line up with the other ambassador parts
I don't mean to diminish the efforts of the devs, they've done a wonderful job... But I'm pretty sure there are plenty of corvettes on this discord that are far better than anything the devs even imagined when they made the system
Oooo I could try recreating that lol
thats what happens when devs give users any level of creativity

I recognize all of those parts. I could create this.
A new corvette
damn thats pretty
Thanks^^
thanks a lot! i think i gotta change it a bit since the back kinda bothers me
Try to combine part it's made more detail
the reason i kept the one engine at the above is that he gave gekking 50 maneuvarability boost
holy frick
combine, like replace someone? sorry for misunderstanding
?
Look this (i use glitch but there is part who are combine)
gimme a sec
You can combine with no glitch
i misunderstood my bad :P
messages load kinda slow
i thought you where saying a engine had a 50% manuverability boost on it lmao
oh YEA i need to change it now lmao
happens
oh thanks! i'll search how. im now off to details hunting again
-#
Recurring channel reminder 
Corvette discussion? 
-# ⠀
NO image "dump and runs", bad!
-# Images not part of a discussion may be
deleted. See
pinned rules »
#nms-showcase-corvettes is where to show off your corvette »
thank you gunter
No problem and have fun
But warning you can't combine everything but you can combine part
Not 50, but you can get pretty good tech modules if you keep trying!
thanks! have fun there too!
Than you^^!
from the 3rd face
I think the max You can get on xclass upgrades is 63-62boost 50 maneuverability and 40 efficiency
Not bad I really like it👍
I was today years old when I realised you can change your exosuits voice lol
You can see the best possible rolls for modules in the menu, but that doesn't take supercharging or adjacency into account
thanks!!
No way really?!
How?!!
Tell me please🙏
Male voice sounds so much better than the female voice imo
Also u can change player voice but I haven't really heard my character make a noise
I think it's probably just grunts
You can here that when he touch the ground
Or when he run
But it's recent
I think
hey guys this was just a requested tutorial on how to build my personal corvette I'm not a professional and have never made videos before anyway I hope yall enjoy and find some inspiration for your own corvettes happy hunting travellers-spider
ps.you can decorate the outside of the corvette however you like
#nms #shipbuilding #gamingtutorial
Also I tried making a YouTube video because someone requested a guide of my daily driver so I'll post it here incase anyone wants to steal ideas or get inspiration lol
Thanks I forgot to put the decorations in the video lol but it's easy to do
Ok I will see that
I love it
How many did you do?!
Genuine question... cockpit 1 or cockpit 2?
1 all day
it flows way better
it was posted in opposite order at first my bad
i like the design of that ship
1 flows better for me and doesn't block the view from the upper window
So, yellow version, titan cockpit?
I like the titan cockpit honestly
Cockpit2
I love your ship man
Thanks guys. It goes back to the yellow version cockpit.
this is what happens when your in a corvette on the couch and the person disconnects
where the anomaly decided to park me
me too! 1st person view is not really satisfying, which is kinda sad... the cabine itself is fire tho
@frozen dove yea the titan cockpit is by far the coolest one rn

the thing that kinda annoys me is from the 1st person view. like the thing in the middle blocking some of the view
here it is on my corvette
(the cabin)
Thunderbird cockpit is the cleanest of the three
I am agree wiht you
You have to go in a spatial station and there is a terminal in the parking and you can use it to create a corvette
I feel like my corvette is missing something...
The lore here is that this is a smuggling ship, and the side pod is what has all the illegal tech and weaponry in it, as well as a hidden compartment.
The pod can be detached to allow the main ship to escape.
The lore is really cool
here's some better views. It looks... I dunno, like I need to break up the smooth shapes a bit, but everything I try just looks clunky
thanks!
I think you can use the cargo part
?(don't understand)
-#
Recurring channel reminder 
Corvette discussion? 
-# ⠀
NO image "dump and runs", bad!
-# Images not part of a discussion may be
deleted. See
pinned rules »
#nms-showcase-corvettes is where to show off your corvette »
For your corvette is cool and we can understand the lore
Really cool👍
thanks! You can see here I use the thunderbird ramp to hide the secret cargo in the side pod :3
the 1st one is right after the entrance - i wanna place nutrition module near the window, and the 2nd one is the living room with cozy couch i like, nip nip, apollo, blob statue and cactus flesh poster - pure classic
the galaxy is hungry for nip nip
I really like the interior
Nice job
thanks! me too. love the titan class living modules, because they ARE titans - a lot of space for interior design!
yeah totally, it's amazing how the thunderbird and ambassador habs feel so much more crowded
IKR??? they need to make them a little bigger tbh
also
did i use IKR properly
the foggy part of slang for me is ikr😭
ikr = i know right?
yeah
i mean did i use it in the right place?? lmao
yep you did XD
oh THX

look what a happy chef i got here chat

I prefer playing 1st person, so I'm always stuck with the ambassador cockpit since it's got the best visibility.
the other two cockpits definitly flow better for most designs
ambassador is that huge round? agreed. i like 1st person in ships too, but corvettes arent ships i'd say... i mean, it's beautiful to watch at your flying home you created!
just need some wood flors to spruce things up
LMAO cool looking tbh, keep it on! ping me pls when you finish if it's okay! im gonna be sleeping when your will be done, so thats the reason im asking... (23:53 PM for me)
oh just making a suggestion on how if you can play modded adding wood floors spruce up even Titan habs and figured a visual example would help
hah, spruce, which is a wood type, to 'spruce' things up, lmao
^^^ 😄
a little update! not sure it looks asymmetrical enough from back, but i love the front! and the inside of course.
I dig it!
dig what? i mean, the part or wut XD
It's a slang way to say 'that's cool!'
oh OKAY thx!! ! !!!! for teaching slang and also for compliment
i love my buddy blob
Usually not a fan of asymmetrical builds but this is nice
oh thx

is there a way to glitch build an exocraft pad on a corvette?
I've seen it done, so it must be
that would be really cool
thoughts on my pirate ship corvette? might make the sails double wide and add some railing
Pretty sure you can only build base parts on a corvette with a mod. Pretty sure
🤣
I always get sad when I finish the expedition... I don't want to click finish!
Corvettes are here to stay though! You get to bring the heart of that expedition with you
sigh... my ship is to big. and i don't mean the size 'cuz i really like it. it's just it has too many items in it now
it has so many items that it freezes my game whenever i summon it, go into building mode or TAKE OFF
the take off freeze is not that bad, but the summon and going in/out of building mode is like 5-6sec freeze every time
it's also so tall that even with the camera mod i can't fly it properly in 3rd person and in 1st person is not usable 'cuz all the guns are still bugged in 1st person

almost 2 weeks of working on it, wasted
how do you change the shape of an object? like the bubble duct which I know that it has an curved variant but idk how to select it
Are there any props that create particles?
How it started:
How it’s going
It’s gonna be like a ship that drills into asteroids and stuff
Anyone know how to build this corvette that’s on the steam Major update page for NMS?
Like this? You can't place other shapes on their own. They snap together and if you place more than 2 you can start making more shapes than straight.
yeah like that
It looks really basic, just look at it and put things in the same places? No special techniques used that I can see in the picture
Place 2 and it'll become obvious how to do it while placing the third 🙂
yeah , that was what I was looking for
There's a few. Something like this?
Anything with flames? I wanna make really tiny cosmetic thrusters for my corvette
not true, have you tried? you just have to stand on your vette and enter build mode lol
flaming barrel
Can flaming barrel be rotated?
yep!
mind you, is only possible to place 6x of then
How do you get flaming barrel?
Everything is unlocked at the anomaly
I assume it’s quicksilver?
No idea. Probably not?
-#
Recurring channel reminder 
Corvette discussion? 
-# ⠀
NO image "dump and runs", bad!
-# Images not part of a discussion may be
deleted. See
pinned rules »
#nms-showcase-corvettes is where to show off your corvette »
I'm talking about full base parts like pre-built structures and domes and stuff. Not the accessory stuff. Unless you can do that while at your base
Its expedition. So I can’t get it
Could just mod in access if you're on PC
I’m on Xbox
Not much to do about it then, maybe they'll end up cycling through old expeditions at some point.

