#nms-corvette-discussion
1 messages · Page 46 of 1
Which piece?
What's fun is you can always expand the scaffolds out to the side and throw on more containers for a bulkier look
So it can very easily change depending on the "job"
Yeah, I did try and keep some jutting out but it does look quite nice with the thinner profile
I'll probably keep changing the amount as I play
the parts that mesh the big kinostream thrusters to the rest of the ship
I am thinking of making a spreadsheet of corvette parts so I can track what I have and how many I have.
Unless someone’s made something like that already.
I'm gonna be honest, the idea of corvettes is cool and all
but as of right now I can't really see any use for them that would make me want to use them over a regular starship
And everything my starship can't do, like planetary probing or foundries, can already be done by my freighter
Which, when fully upgraded, I can summon from literally anywhere
I am kind of in the same boat. My starship can do most anything I want in combination with my freighter. And I can seamlessly access the freighter’s inventory too.
What I do like about corvettes is parking in the air and using my scanner
One potential use I see is for Expeditions, if you are in the habit of copying your main save ship over to your Expedition. It’s like having a ready-made base
There are also some uses for multiplayer and taking other players to different places but I at least don’t find this particularly compelling.
as someone who has never built a real base I like corvettes cause it lets me do my homeless camper van fantasy in space
I am probably going to wait on committing to a corvette until all the parts Hello Games lists on their guide are available.
Question if you put the landing gear above some ship parts do those go underground when you land?
My best Build, the ever best, Units Received
How?! And I love it
How are people making full on circular saucer ships?!
This, I suck at base building.
Firebox fairing
Idk but I must find out
Any improvement ideas?
chonkerino.
just finished my first proper corvette build, what do you think??
Opinion?
love that your build is offset
I like the top angle
that blue n gold looks real good
Im so sick of the builder right now
rly? thanks
all the day desing xD
I did it. I made a spreadsheet of parts and how many of each part I want.
I really wanted to love my dragon fly but its such a pain placing the grass
leviathan? xd
I still have to update it with the number of each part I have and then I can also figure out what I have to trade. But the most difficult part is done.
is a very crazy desing
I am thinking of putting the main body of the ship on structural supports that attach to the landing gear. Then I will need an underslung hab or walkway for the landing bay/access. But it will also mean that I can attach stuff underneath the ship!
i think the corvette parts must be extended to 120 because the propulsion system is the last added and we desing and when want to add that... oh shit surprise u has exceed the limit xD
Any recommendations for how to hide the hab part?
(Yes I did take inspiration from that one guy who made that one corvette and this is in-production
-#
Recurring channel reminder 
Corvette discussion? 
-# ⠀
NO image "dump and runs", bad!
-# Images not part of a discussion may be
deleted. See
pinned rules »
#nms-showcase-corvettes is where to show off your corvette »
I'm not showing it off, GUNTER, I'm asking FOR OPINIONS about PIECES of said corvette
its a recurring automated message to remind people in general
poor gunter
fr
he was only doing his job
Fucking Gunter.
chill
Fuck YOU, GUNTER
LMFAO
breaking server and channel rules leads to quarantines, would you like one?
lmaoooo
i know what you are, günter.
** i know you for the** c o s m i c | e n t i t y you truly are.
this facade you wear, ORGALORG, can not FOOL ME

@azure edge Be civil. And on topic. If you do want to avoid quarantines.
In other words, none of this.
Yeah, alright, do you have any recommendations for what to do with this part of my corvette that's sticking out?
I really don't like the little hab corner
-# you will not get me, dark one, i will not fall to your whims

Like I like this wing thing or whatever, and wouldn't mind sticking it back by one, but the hab's back is like really ugly
seems like any time i end or exit multiplayer my corvette's modules get moved around?
You could add in some aesthetic pieces. Maybe hull ducting, but that would make ship longer to place another piece there before arcadia cowling.
I can barely make out what your corvette is on this image
Do you have a better one
Do I need a Cargo link on my Corvette or is that aesthetic?
Anyone think they can supply me with everything I need for a corvette? I have an idea
can buy the basic parts at a space station then dig up the rest on a planet or trade for parts you do wnat
I need some parts yesh
What does salvaged scrap even give me
The ship parts
the very parts youre asking for lmao
Itll give you Corvette parts, and ancient objects to see
sell
Im really trying to be helpful. lol
No its new, theyre yellow wifi looking icons
similar to the grey icons, underground
I see well thank you
Happy Hunting. I've had luck using an exo craft going from one location to the next.
That was my plan as well
I use the mech with some jump upgrades
yeah exocraft would be best bet
So some move faster?
yeah you can upgrade them to move faster. i think the one that looks like a funky two wheeler might be the fastest but idk
chonker done.
Habs give you 3 cargo slots if you have enough habs no cargo pieces are needed to give your ship more cargo room. So it can be for looks or used for actual cargo space depending on your build.
Yes, the funky two wheeler seems to be fastest. then you can get modules to modify them and upgrade their engines for more speed
thank you
Lovely chonker
thanks bud
There should be a disclaimer on bottom of piece details when you hover on it. There is a disclaimer that will tell you whether you will get a bonus or not from a piece.
Ah, yeah the one that I got about too many engines I imagine
bingo
Very fun fact about anything placeable that you can pick up with middle mouse button:
If you try to pick it up with MMB, it toggles all your ramps on the ship to open/close. You can use stable glitches as remote control for ramps/landing bays.
upto nine engines will give trails any more than that and some won't ave trails. Only 3 I believe give bonus. Bonuses change as you add parts so keep checking their bonus values.
good info, thnak you
Despite some believe you can get bonuses from each reactors and up to 3 of each kind all give bonus. Well I havent triewd since latest patch.
all this is true but all cockpits are also medusa reactors
I am terrible at Corvette building
Oh... I knew the cockpit acted as one reactor didn't know it was the medusa
Glitch building opens up way more capabilities and not really a big todo to build this way, a bit more time consuming as you adjust parts positions.
For me its trial and error. I build till I like the way it looks. I don't start with solid plan in mind. General shape and try to build to it, and more often then not I change directions half way through as I find something that I think looks cooler.
Makes sense
i do the same. look up some idea pics for inspiration sometimes
I think I have a hard time translating shapes into the blocks we are given and making not making a box
Its also not a bad idea to remix an existing design
Anything worth while trading for for the advanced modules?
Really want away to be able to undo things in building. Also really want a way to save build designs.
Most of the really cool pieces are the advanced ones, so imo yes most of the parts are worht trading for. However you can grind them by just scavenging.
So high energy sheild would be best with ceto class reactor
Lemme see yalls builds
you want me to get int trouoble for spamming pics
-#
Recurring channel reminder 
Corvette discussion? 
-# ⠀
NO image "dump and runs", bad!
-# Images not part of a discussion may be
deleted. See
pinned rules »
#nms-showcase-corvettes is where to show off your corvette »
lol as if on que
gunter on yo ass
Gunter watching us like a hawk. 1984 up in here 😔
If you're just photodumping you'll get in trouble
but in this context we're gonna talk about it
so is ok
yep.
My first build with glitch building.
And this little cute bugger opens from front and back like M2 or c2 in Star citizen
Any problem using a short range teleporter in my corvette standing still or underway?
it's not supposed to work
doubled sided entryways
Idk why but green is just superior
Nice ships
I just learned about glitch building and still exploring the limits and abilities of pieces.
It makes stuff look cooler
I need to learn. I’m struggling.
Green is my favorite color. 2% of humans have green eyes, me included.
Has HG said when a next patch will be?
bro added a fun fact
Need to have that constant tech shuffling be patched out.
the inner core of this ship is 3x2 walkways.
it fits 5 reactors, 3 shields and gun mount
this is the power of glitch building
XD
I like it. Gives a bit of klingon warbird vibe imo
Anyone have tips on how to build this im mostly having trouble with the scale and circled areas
this is my least favorite milano tbh
if you are a bit insane you could try making the circles out of base pieces
otherwise idk how you would make them
Yea but everyone is doing milano so I gotta be different lmao
the square fits in the square hole
I tried that it looked like ahh. I might have to do some offset trickery or something
yeah i may be guilty of being a bit inspired by that look but nothing direct
Ambassador cockpit just forces me to make overhang cos it just fits it
I wish there were more round pieces
Maybe I could do something with fuel covers
anyway heres my mini star destroyer
I like to try and tuck my cockpit in. uhhh, thats not right.... Put them like this not out front
yeah depending on build i just hide mine at this point but that looks very good
That SD is a beautE!!!
Is there somewhere I can find a visual comparison of the different hab modules?
I have intentions to make one of my own eventually..
If im using infraknife on my Vette, should I use the photon or lasers?
Hell of a job. How long did take to make?
i use lasers and photon because i like my corvette intact as it is(shield siphon)
Yeeeee
Shield siphon is a great
Me?
it makes you feel invincible whereas infraknives makes you feel berserk
yeah
Around an hour 30
Im ignorant about shield siphon, but good to know it exists. Should I ditch the infraknife?
too bad we can't take off photon cannon from corvettes
If we could take off photon cannon i'd use infra and beams
for both siphon and instakills
Hey anyone know an easy way to upgrade the corvette class without shelling 10,000 nanites?
Does the Medi pod do anything?
"Not yet" I was told
farm nanites
Ah okay
its the only way
Thought I just couldn’t get it to work lol
All of my tech slots are filled up by parts I used in making my corvette. Is there a way to get more slots so I can install the improved hyperdrives?
can you wire glitch on corvettes?
whenevr i try it switches to a part i didnt want ot place
Disassemble most of the valid corvette parts, install ALL your tech, assemble ship again
I wish we had a paintbrush to paint our ships. Feel like this would look good with a red stripe down the middle of the longer side
Boom, slots
Ok good to know. Will be tedious, but thanks.
-#
Recurring channel reminder 
Corvette discussion? 
-# ⠀
NO image "dump and runs", bad!
-# Images not part of a discussion may be
deleted. See
pinned rules »
#nms-showcase-corvettes is where to show off your corvette »
Do the short range teleporters work in corvettes?
I can place them, but I can't seem to attach the cable to anything
they dont work
Dang, thanks for the quick response! Saved me some wasted minutes
does this kinda look like the ironclad from star citizen or am i way off base?
Any tips for making interior designs look more polished and less clunky?
Ambassador Habs. At least for storage racks. The storage racks take up a lot less space in ambassador habs.
Hmmm.... guys do you have any tips for making a small ship? Like a really small, cozy but cool one :>
aside from obviously using the offset glitches, id just say freeflow it til you find something you like
creative
@rugged jolt I gave up 😔
What happened?
Show me what you have so far
We really need more vertically oriented pieces.
Its hard to decorate multilevel ships
This, or rotate parts vertically
All of them should be able to rotate fully no matter the position on both x and y axis
Otherwise it makes it limited
show what you got
Do the stations give me worst deals the more I trade parts?
I started building something else instead, so don't have anything to show lol
😭
Yea I stopped a while ago, no idea on how to do the back and the middle
has anyone else made construction equipment
Of the consular
Can I put my corvette parts in the cashe and they'll be available at any space station
Yea, it'd be pretty dumb if they were linked to a single space station
What I did was lots of offset building
Awesome thanks. Gotta save space on the expedition
I made a transport ship if that counts?
?
I've seen salvage barges
I've made something different than the consular but I'm unsure about it, like I didn't have any plans or anything in my head, just randomly pieced it together
Woah!
What are those things on the side of the containers
this is an awesome idea
on teh side? The scaffolding?
Oooooooh
forget what they are called
Thats cool!
they are more circular though so they don't have such a blocky incomplete look
thrusters fit flush on those
You should share
i think a lot of ships people make are basically the same ships
people tend towards this triangular shape
Heres the base of mine
Im gonna decorate it tonight.
That front long bit is gonna be a deck, and im using the top The Roach.
so far, unsure about some parts, rn been thinking about the engines/rockets mainly
if you just scroll through the media tab here youll see what i mean
Looooove top decks. Its so great for utility and just getting great shots
Throw some sails on there for a great vibe!
we like weird stuff
Do you know how to do offset building?
It makes sense. It looks good and it makes it so the habs aren’t awkward to move through
idk if thats offset bro
thats something else
I wish the bigger engines had thicker trails
i agree
-#
Recurring channel reminder 
Corvette discussion? 
-# ⠀
NO image "dump and runs", bad!
-# Images not part of a discussion may be
deleted. See
pinned rules »
#nms-showcase-corvettes is where to show off your corvette »
It does look a little weird
especially the square ones
I knew i wasnt the only one
I would offset the engines so they aren't clipping
What I honestly think is the main weirdness to me is that the engine itself is a a deep void. If the trail is small that’s one thing, but for the engine to be this black abyss is just odd.
huh?
My guess its our natural inclination to build stuff that looks aerodynamic
and also the fact that half the pieces lead to more angular styles
they're not final, im probably gonna remake the ones I use on my razor crest
yeah but i want to see creativity despite our limitations
anyone can make a triangle
creativity within the triangle is also creativity
Its not finished yet 😛
no offense to the people making them but theyre not unique
I plan to make a circular design and then an offset one. I’ll just have to farm parts to do it.
i want to know
also rn im checking to see if the sides are better in a different order (right side)
mine ships technically also fits into a triangle, so what
can i make a ball
The bot wont actually get anyone in trouble for dropping pictures in here right?
probably not
I have made an ellipse, ball doesnt seem that doable
unlucky
are these good for "not triangles" ?
the bot is gonna kill you
ive seen your ships before
i like the space station one
Real
yeah like, there is a lot of non triangles
and i also build in normal so
Like mines definitely at guilt of the triangle thing
im stuck with the stuff i actually have
oh okay lol
Its pretty hard to make non triangle stuff look good imo
thats true
Because in order to make something less angular you have to use a lot of the same parts
i mean, reverse triangle is also a vibe
as long as you aren't photo-dumping, it's fine
if the photos are related to the discussion
but its still kinda triangle
you cant just make a weird ship
-#
to view info below, enable embeds
It looks like you're showing off your cool corvette creation! We love that, however...
This is the corvette discussions channel. Per pinned channel rules, we do not allow corvette image dumps here. Those are more fit for 👉 #nms-showcase-corvettes !
you have to make a purpose for your ship
ah yes elgnairt are pretty cool
Another big thing is you cannot rotate cockpits.
I plan to make the big ol donut kinda one, but I also want to make a flying saucer style design.
i found you can place them backwards on backwards habs
i dont know if itll be weird
will it let you fly it backwards
One of the coolest I saw was a salvage Tug type of ship
The detail was so good
a good ship has to tell a story
That’s a very good tip
A fun thing I like to do is use the grill heater to misplace parts. It’s how I did my weird cargo/shield combo on the top of the bridge on my corvette.
i used the grill here so my gun would be upsidedown
I mean, my CMS Nuisance/Verdant Venture has literal in-game lore and story that is written in stone and data.
It doesnt get any more purposeful than that,
its a replica of a marauder bomber from 40k
Ooh I like the idea. Though I think there are foils that would make for a better looking tail fin.
had to be horizontal
but its a little bit a triangle still
im pretty hype about this one but something about the front bugs
What do you mean? You don’t work at games workshop and design 40k models? Lol
Anyone have any tips to make this look better?
i dont think i could handle the modern gw office
here look oye, not a triangle
and looks awesome
Has anyone made a hotrod corvette yet?
i like the shape!
me in the cockpit looking at nothing
cool though
i think they should add a way to see through parts
maybe a camera piece
idk
I also wish corvettes had better color options and more exterior light options-. Though I just generally wish I could use white and grey lights everywhere to serve my species proudly.
i dont mind hiding the cockpits
idk how they would do it
just putting screens inside ersumshit
i like to fly in first person so i really cant
yeah i feel that
i fly the OG starships in first person, but with the corvettes, i like to see my creation lol
@abstract obsidian
that one was my biggest
I hope we get expansions to corvette missions. I'd love to be able to go on frigate missions with my fleet
What counts as gigantic? Because mine has 14 habs.
kind of a goal for me i wanted to try to flip a part, use the landing thrusters, and use more than 3 habs.
basically at part limit
i dont like to use a bunch of habs cos h onestly i dont like walking around a big ass ship
Anyone tried making the DHV Magellan yet?
Oh well mine is exactly 100/100 lol
Someone told me a cool trick that you can actually go over part limit by adding windows after exiting the editor
heres a cool picture i have of it
yeah i did that lol
dont come to my house
i didnt know that was there
ehhhhhh....
dude thats not bad at all for a first attempt
make it bwue
Looks good to me
If you want to polish it work on the underside
that can make it look a lot more put together
i like to make ships with no landing bay
so like its going to feel odd at first cos the parts are huge and it wont feel like things "work together" but just mess aroound with pieces. find a similar angled piece and replace it so on and so forth
ough yea this sucks lmao
enter through a hole in the roof
I think I just need more pieces honestly
Also a good way you can “hide” a cockpit but keep it operational is by basically building a tiny ship on the bottom and building the rest of it ontop of that.
every time i see someone build a boat style ship i hope to god theyve done that lol
Even if you just mirror the angled front on the underside as well
my big ship has a cockpit on the underside
That’s fair. I only need to go through like 4 lol.
yeah i have a big windowed room on the bottom i could swap to a cockpit should i so please
Been sitting here chatting about shipbuilding while the sentinels are hunting me down outside this building
They will never leave you alone
I know but its funny to waste their time
with these engines im 15 over the limit 😡
looks like ill have too mod
It gives me a mantaray/scorpion vibe. I like the idea.
its more like a bulky naboo star fighter
Maybe I keep the engine thing and try to make one instead?
think my next projects gonna be to build an asymmetrical ship
-#
Recurring channel reminder 
Corvette discussion? 
-# ⠀
NO image "dump and runs", bad!
-# Images not part of a discussion may be
deleted. See
pinned rules »
#nms-showcase-corvettes is where to show off your corvette »
Always a good idea
Was just staring at a hauler thinking asymmetrical ships look super cool
got a particular style or vibe you wanna go for?
man im not even sure. i think i wanna do something detached maybe one wing larger than the other rather than just one wing
but hell idek
i want it small though. i want to use the landing thrusters again.
I do love the Naboo star fighter.
any way to put this boat in the water for real?
might be able to use the starship water landing things
tried, i just float way above the water
those water lander things are uselss for corvettes
You can't use landing thrusters on large ships?
You might be able to glitch parts under the ship builder.
And then those parts might be able to go into the water.
those are just two things i wanted to do my bad. ive done thrusters on my large ship that was my last build
oh okay lol
Honestly I would be into a smaller asymmetric pirate or junker style ship
yeah thats kinda what im goin for
In my head I'm picturing ships from the X wing miniature game
The scum and villainy faction
i want something "grineer" esque if youve played warframe
this kinda vibe
Star citizen Corsair and caterpillar are both asymmetrical and pretty cool looking if u want inspiration
I tried to make a caterpillar corvette but the actual ship is too small for me to really use it
That would be super difficult and super cool
they have very organic looking shapes to their ships and tech
yeahhh i dont think ill be able to do it THAT well lmao
If you did a larger build it would be doable
but I feel a smaller build would struggle a lot
You would probably have to do a lot of offset building with the engine casings
duude yehhhh
i just wanna use the titan cockpit for something and be able to see the top and bottom
oooooh
Actually that would be super awesome if you could see the asymmetry from inside the cockpit
but when i say small i mean
this was actually a total accidend i have no clue how i did it but we're gonna send it.
accident*
Does anybody recognize this ship? I don't remember building this but it has the same name as my old ship
How do you increase technology slots on the Corvette?
Never mind, I remembered lol
You have inspired me
Oohh
unmodded too lol
damn that thing is coming along
womp womp no gif
Ooo
using this as a rough reference, but definitely not following it 1:1
the top left hull for example is more a 2x1 slope but im doing a sharper 1x1 because it looks better for this
my two builds atm
The 2nd one I just made mostly using the offset adjacency thing
The 1st one’s entirely glitch-free
most of my internals will be completely custom made if no wild bugs break the idea lol
Yeahh
ive already had to learn 2 forbidden techniques to pull off this thing so far
That’s the issue with going super manual with these corvettes,
one was scale
i got er 26 modules long
cut down to 24 though because of both overlapping with other peoples ships and an issue with placing custom parts that far out
I swear I saw that first one on yt
For sure!
-#
Recurring channel reminder 
Corvette discussion? 
-# ⠀
NO image "dump and runs", bad!
-# Images not part of a discussion may be
deleted. See
pinned rules »
#nms-showcase-corvettes is where to show off your corvette »
Really dig the first one
why my corvette ship's all guns are not working properly? how to properly work my guns in corvette ships anyone have any tips?
who's ugly ship is this?
im so heated i fucked it up
Ty! Yeah they’re both original designs
thats like 10% of a ship to you 🔫
looks pure shit, and lazy!
I try to make their profiles look memorable
Holy crap! You made the roach?
Ty so much. Your build is an inspiration rn for mine!
Awh thanks lol
i see that ship in the youtube, he must be copy it from it!
im going to punch my own face cos i accidentally did the cockpit to entryway glitch
Yeah I built the roach ship, both are original designs and use some pinterest ships as reference for the aesthetic
Yeah he made a youtube video on his “iteration” of it, he mentions my name in it for like 5 seconds but kind of treats it like it’s his own :0
it’s a work in progress vro
trust the process, especially in Lily’s case since they’re making their ship hull off of exterior decor
Noice!
My plan rn is that I'm gonna use your cockpit area with its dome, but give it a deck below that like a sailing ship.
Mine is a gonna be more back heavy, favoring the bigger engines over the wings.
Im going for luxury cruiser design wise
Ooh, definitely would wanna see
Is the roach ship your own naming or is it a reference to something
My own naming
It reminded me of a roach because of the “shell” I built encasing the top
What do we think????????????/
daaamn yes
i cant figure out how to save without a hab lol
I love round ships
Supposedly you can though idk
LOL im wanting to make this tiny bug so badly. going to mke it like a fiddler crab style i guess
I only did the green paint job to make it look grineer
The hab framework im working with. I basically swapped around your hab framework.
Deck 3: Command, Radar, kitchen
Deck 2: Computer Core, Engine Room
Deck 1: Cargo hold, Hydroponics
imma try a red black look
Cool
I want to see more vertical ships too
For sure!
Vertical is more fun
I actually like having the central staircase in this one
Would help if we could rotate parts vertically
I may try a vertical ship next
Do a 3 pointed ship
Left wing, top wing, bottom wing
Yeahh, but it forces some creativity
Like using the foil wings to make the up curve on the bottom hull.
Not really, its more limiting, what you can do instead would 90% of the time be more uglier than a clean part rotated vertically
pre-OSHA augh scaffolding 🤣
Truee, but I guess my ships embrace more of a stripped mish-mash look
a lotta greeble
ooh very nice
Like this one looks good, but the long parts rotated downward would look much better
i dont see many vertical ships like that done effectively
does adding more thrusters increase speed?
I completed the expedition and copied my Corvette, but it is invisible and not showing up, but I can spawn it
Modules are still king
Any ideas?
Should really go in #nms-questions
i see, but is there still some benefit? its also a matter of decoration
They're additional modules
They're not amazing but it's still a boost
gdi what is the name of that video explaining how to build without required parts
Was this yours?
Yeahh, you get what I mean tho yeah?
The front would look much much better with vertical parts
More closer to the original pic
Cleaner and sleek
Definitely prefer the red black paintjob over the grineer green
Sure, but he made his own, original design, working with the parts he had
Idk there’s a lotta uniqueness
should i have the hangar bay doors go 2 long as highlighted or back for another module length?
Well, he was trying to recreate a ship so... He's limited by the builder
Have you thought about using the sharper fuselage pieces on the top like this one?
I could but I was going for more of an organic look inspired by the grineer
now that I've finished that I'll try the sharper edges
Ahh
Finally made my first corvette! It’s a compact lol
still waiting for someone to recreate the 50ti from sc
@thorny wyvern
-#
Recurring channel reminder 
Corvette discussion? 
-# ⠀
NO image "dump and runs", bad!
-# Images not part of a discussion may be
deleted. See
pinned rules »
#nms-showcase-corvettes is where to show off your corvette »
I do like the angular look as well
What do you think? Does it sort of resemble a 1930's Buck Rogers Spaceship? 😄
Remidns me of the yellow submarine but its not yellow
Idk why
it doesn't look like the yellow submarine
but that is what it reminds me of
I can kinda see that
Unfortunately Idk what a 1930s buck rogers ship looks like so I have no feedback there lol
anyone have a video on how to build a ship without a hab
cant find them now that im actually looking for it lol
you’re gosh darn right feller
Yeaaaaaaaaaaaa can't say that this looks too good lol... might be my worst design yet
its still less suggestive than @nimble stirrup ‘s 1st corvette ☺️

ASSAULTT
well you can't say that without sending it to me
Curiosity will kill this cat
Very old sci fi coded! I love it
@nimble stirrup you heard the man
Now I'm afraid
I made this one with a similar vibe
Kinda like
Old nasa shuttle left to rot
and the crowd went mild

:>
eh eh?
its only a little based off of the paris class unsc ship from halo
This one named the Promise of Dawn
offsets have been used btw
Honestly this stuff makes me want some space engineers style power management.
Like our reactors need fuel since its pretty much a mobile base
maybe a backwards square thruster here
idk how to do backwards thrusters tbh
Ehh, use attachers instead of habs on the side
I fixed it? (ignoring the floating antenna I just have to set them down again after changing some parts)
Even still, not my proudest work
can someone navigate me where are these orange big cylinder parts in the game?
reminds me of that one star wars ship, the invisible spike or something
The stealth one?
Looks like a sith lightsaber
Anything is a lightsaber if you're brave enough
It's the storage unit
Ah no gifs
Sad
how are people making open-air corvettes? or using the normal base building walls on their corvettes
ye it looks like that highkey
Oh, I have strange idea. What if I place ship landing pad on my corvette 
mods
how do you do that "cowling" bit?
the angled panels
-#
Recurring channel reminder 
Corvette discussion? 
-# ⠀
NO image "dump and runs", bad!
-# Images not part of a discussion may be
deleted. See
pinned rules »
#nms-showcase-corvettes is where to show off your corvette »
Painfully
So I made a second line of hull modules on the right as scaffolding, then placed angled modules where the cowling (which will be its normal hull plating) is. Then I used the wall panel deco, a lot of patience, and some pain
🫡
B2 bomber
those are storage containers inside the titan habitat module
How do I put stairs to go to the hab above?
there different for each habitat module
just look foreward and place them
if you look down it will place them below
But I've already finished the edition of my corvette.
you can build them after your finished
just enter the corvette open build menu and select corvette modules
its the chair shaped icon
you want to place them below the habitats?
i dont think you can but the tunderbird acses is like an elevator you could use that
fire
Thx
I can put it inside?
its like an 1 by 1 walkway with an elavator going down
swich to creative and try it out i would say
This guy say that but i can’t understand what is he saying
a yes i understand
place an habitat where you like the stairs
then place the stairs inside the habitat and remove the habitat
the stairs should stay in place
no those are landing gears
Landing bay*
you cant find it while editing your corvette
exit edit mode
enter your corvette and press z
its like base editing
ooooh i do that before but i don’t see the stairs
Srry for that trash of english, i havent practiced much lately
And this corvette stuff stressed me lol
Yes i found it
im on keyboard rn else you couldnt read it
happy to help
Oooo now i can acces to the main cabin
are you new to the game?
idk
never used it
but the devs dont remove positive gluches like that
like an duplication glich has been around for years
de dont pach ehm becouse if you want to dupe shit than thats on you
so i dont think it got removed
Ig im just idk how to do it
search on yt
No
I play since 2 years i think
Anybody has an idea to make the ranger from insterstellar? 🔥
I want to tho that next but i think its so small for a corvette
seen the movie but no i have no idea
My first ever Corvette, kinda like how it turned out, only 12.7M units
thoughts on my first attemt at a SR-71 Blackbird
And so we have a quick 1 hour build Mech
How can i park my ship into my helicarrier corvette?
hover on top of ot and slowly aproach. When you are near press land
-#
Recurring channel reminder 
Corvette discussion? 
-# ⠀
NO image "dump and runs", bad!
-# Images not part of a discussion may be
deleted. See
pinned rules »
#nms-showcase-corvettes is where to show off your corvette »
Oooh i dont have the animation of fallin
destiny pyramid fleet lookin ahh
Hey can someone help me with my corvette build please? 🙏 I need giant sails but I can’t glitch them bigger using the scale glitch because I bought the transmitters 🥲
how many missiles can u put on a corvette
I think 2 is the max that has an impact on missile performance but you can put as many of the pods on as you want
so i can send a doomsday volley? or will how does more than 2 work
i want to feel my game die from the amount of missiles even with 1 dmg
whats wrong with my ship, i just put everthing that has stats
Wait can you park ships on corvette?
Yes
Don't mind me just getting my slots xD
I do it and it works
Holy shit
Do they disappear after reload or stay?
Also can you post a pic of your corvette build?
I want to try it
i wonder if i trump this?
how they put terminus portal inside ship?
why something like this is can only happen in creative mode, in survival even you have mod or have alot of part, we cant design somethign like this because it need a lot of trial and error
in yt have a lot of trick
Real shame, people normally post build tutorials but I can not find for this one. I'll just pass on this build
glitch building suprisingly has never been patched
u just gotta really work for it
its hard asf to do if u dont know what ur doing
they should not patch it, they need to make it as features
or u can be me n do wtv n hope it works
base building update soon...
trust...
better camera...
anyways posted it here earlier but i followed a guide for this ship n im loving it
Does anyone know how to build a long Corvette in the freighter style? I couldn't find any construction videos.
I think I might do the same, do what you can from a pic and hope for the best. Play with it as you go along. good build
Ok wait
Has anyone had the problem with the corvette disappearing. i can summon it but its just not there
i like how people make spaceship that look like a spaceship
Straight or swept-back wings?
the swept back ones look sick
Thanks!
cheap to craft and stackable, yess i love it
why make wing when there is no air in space?
Aesthetics
Plus we fly over planet surfaces
Unless you're somehow just completely avoiding the atmosphere at all times.
Plus, the space shuttles all have wings.
Alright. Time to try and get these damn glitches to work again...
Dammit. I still can't get the glitches perfect! The nose of the ship just won't let me flip the damn Arcadia wing.
finishing up the first layer
and control room, tho the rest empty still idk what to do xD
I tried to do it and it didn't work :/
Wait, got it figured out finally.
Corvetti my spaghetti
Oh yeah. We going big with this one.
gl!
I saw one of these in the anomaly a couple hours ago
Doing the nose already gave me a hernia, so it should be smooth sailing from here
can promise it doesn't
lol
i made it smoother and its aids
But your design has a lot of overlapping to it to be as close to the real design as possible. For my own sanity, I'll be trying to tone that down a bit and make a variant of an SD. Also, I have no idea what parts you used.
I don't know how anyone has the patience for glitch building, I tried it and it just pissed me off
doing the interior now
i was very annoyed too lol
You ain't glitch building right if you aren't about to break your controller or mouse out of frustration
I really hope they keep working on the shipbuilding system in the next few updates to add more features and allow greater creativity with the size and placement of modules
I hope they add more lighting so I don't need to use this mod just to see what I'm doing.
It'd be easy enough to do, there's already lights in the landing pad so they'd just need to make the light values increase when you load your corvette in
-#
Recurring channel reminder 
Corvette discussion? 
-# ⠀
NO image "dump and runs", bad!
-# Images not part of a discussion may be
deleted. See
pinned rules »
#nms-showcase-corvettes is where to show off your corvette »
If they wanted to get really fancy they could have some "shop lights" that could pop up out of the pad to make it look more sci fi or whatever
I think the modder just put 2x the lights around the pads. But either way works
anyone else experiencing a glitch where the camera zooms out super far away in corvettes?
like this?
Which version looks better for my stealth jet build?... can't decide
They're called corvettes I think
No but would be awesome to know how you did it, cause i cant see anything with the close camera
Sorry I worded it wrong o mean like C,B,A,S
Like do parts affect its grade
Ohh
Yeah I think they do
Like the reactors do
And you can upgrade its class like normal ships
Is there a way to just go straight to s
I think it starts out C class overall
Then you can upgrade it to S
Meh idk
You could just go to creative and buy the upgrades
Otherwise I don't think so
I don't see any difference :p
Other than maybe the colors
Okay ty
@twilit umbra Cockpit in different locations
yeah, experienced quite a few new bugs with the corvettes actually, had one yesterday where when i try to use the pulse engine it resets my ships direction the oposite way that i wanted to travel :/
Oh I just noticed
Eh I'd say 1
@twilit umbra Sweet, thank you
I don’t get these parts
Why?
You're welcome
Not sure on what I need
Might just build something small for now and then try look for the parts I think look the best
Obviously there’s no way to get the part I want exactly but I’ll just have to keep farming
You don't need much for an actual simple frame
But making smth bigger and nicer needs some creativity
Going to see what I can make with these first probably
Alright good luck
So just to be clear the parts don’t affect the ships grad or stats and are all just cosmetic
No they do affect it
Like the manouverability, shield strength, and power
You can just test around and see what each part does in the workshop
It doesn't use the parts
Now this is where things get challenging: How to fill in the gaps.
Has anyone tried and made short range teleporters work for corvettes?
How i get this grass and plants
The plants and such is parts for base building. Unlock them at the construction unlock thing in the anomaly or buy for quicksilver at the quicksilver merchant.
Some are also expedition rewards.
might be mine being buggy but those parts u have on the side are flipped the opposite way for me
but very cool ship
No, they're flipped. There's a glitch that allows you to rotate otherwise unrotateable parts
Question regarding some of the builds I have seen, how do we get noclip/free placement with corvette parts? Or are these peopel doing it with glitch building?
Corvette parts always snap. But there's plenty of glitches you can use to snap them in ways the devs probably didn't intend
Sometimes you can do it naturally, other times, you gotta glitch them.
mmmm my new corvette
Water
Okay I have my spreadsheet of corvette parts
I have to go into the game and see how many of each I actually have.
Also I could not see the full name of all the things on the resources page so I have to get that from the game itself.
I included the parts that are not in the game yet! There are 3 cockpits we haven’t gotten, among other things. And the Infra-knife platform
One of the joys of glitch building is placing something on accident and just not knowing where the hell it went
I get it
Hah, yeah. I keep backups and reroll if I can't find something I placed 😄
that's going to be useful
Ope. Found it.
There the storage module for the inside of titan habs
does anyone have a cool tutorial?
What kind of tutorial are you looking for? You could look around at different ships people made and see if there's something you don't know how to do and ask about that specifically. The corvette system isn't all that complicated but there's enough of it that showing off all the possibilities would take hours.
Currently tinkering with this design love the idea of giving corvettes "tusks" at the front
It seems slightly difficult to see out of that cockpit 🙂
Actually you can still see out of cockpit a little with this build but I don't play in first person so I like hiding them
Is there a way to pin salvage scrap to farm corvette parts?
Look at it and hold E, just like you pin anything else with the scanner
Oh sorry, I meant via the catalogue
Isn't there a 100 part limit
How are yall just doing ts
Mods
Feels too big for 100 parts
-#
Recurring channel reminder 
Corvette discussion? 
-# ⠀
NO image "dump and runs", bad!
-# Images not part of a discussion may be
deleted. See
pinned rules »
#nms-showcase-corvettes is where to show off your corvette »
im going to be spending time getting parts and building ships today lol
Nice
Good luck
It can be pretty quick if you have the right tools. That being a corvette with a ballista. 🙂
yall know how to remove a corvette piece that you cant select?
hope they add the untextured infraknife cannon platform to the game
Why do my Corvettes look ugly
They beautiful on the inside
making a ship right now based on the panther clipper from elite dangerous but smaller, what u all think so far? and what should i change?
how many floors?
I need a side by side
It didn't seem so big at a glance due to how well you angled the sides, but that's many times the volume of my ship! I just have two hab modules on mine >.<
mine is slightly different
smaller obviously
its impossible to build a 1 to 1 scale of the ship in nms
cuz its bigge than the grid
How far from limit are you with it?
back
not that far at all but it was a nightmare to build the first one
due to its gargantuan size
so i just made a smaller version
heck even the smaller version looks massive and very spacious lmao
I'm over here thinking how to improve with a medium small version rn lol
its very similar to its shape
Doesn't it get difficult to actually use a ship that size for gameplay?
i just liked the shape thats why i made a smaller version that still has that shape
Is it 5 wide?
Looks like 7 wide to me, but maybe you're not counting wings and landing gear
My ship is only 2 wide if you only count the body, I suppose that's on the slimmer side
ye
I really hope hg change it so we can change the colour of the ambassador interior walls they look cooler and the most alien
I like mine orange:
I get flash banged everytime I go in mine in the station lol
Literally it's so bright plus the interior doesn't match the dark colours pallete of my ships shell
I was thinking of putting my own walls in
While you can't turn them black or grey, you can tint ambassador pretty well using lighting.
Not a recommended color, but this is ambassador tinted green from above and orange from below. If you're into that kind of madness:
How did you get the interior painted
By hiding lamps of the color I wanted in little nooks and corners:
My current newbuild ship.....forced to have a white interior
but yeah anything u guys suggest i change on my ship?
The interior depends on the parts you use
Unfortunately all I can think of is downscaling.
u want me to make it even smaller?? 😭
Yes I know but I'm tired of using thunderbird all habs should be colour changeable inside
No
Just paint your ambassador insides then? I did mine in orange
Then don't complain lmao
But you'll have more flexibility
You... can't?
Did they change it
Technically no, but practically yes? You can use light to tint it:
I'm intentionally only tinting it from below because I want to see the color of the environment on the upper parts but you could tint it from multiple directions
There's nothing wrong with criticism about weird design choices by hg but ok
I can try to copy it and see what I get but might not look exactly and no cool moving engine parts 🙁
indeed very sad
thats why i used those legs
I figured
Is there a back angle of this?
Leveled?
leveled?
-#
Recurring channel reminder 
Corvette discussion? 
-# ⠀
NO image "dump and runs", bad!
-# Images not part of a discussion may be
deleted. See
pinned rules »
#nms-showcase-corvettes is where to show off your corvette »
Where I can see it straight
My first corvette I actually TRIED on.
What do y'all think?
uhh
I want to see the rear lol
Hey, that looks lot like my second corvette. Except better 😄 I like the color scheme! Maybe a little bit too much red? Could color some pieces grey to tone it down a little bit
Thanks, but i kinda like it red
That one is angled at a birds view
You think we get voyagers 2?
Are you asking if I think there's going to be more corvette content? In that case I'm sure there will be, there's no way Hello Games hasn't noticed how much people love corvettes
Rn everyone's ship looks unfinished or finished but similar.
I'm hoping the medbay becomes a reusable, periodically recharging healing station... but what purpose would the bunks serve?
I think there's a lot of variety. Could always be more but I don't think my ship looks anything like the last few ships posted here.

Nice a giant flying orange pill 😀
i showed u
Speak for yourself i make sure the entire exterior is covered so it doesn't look like a brick 😂only the ridiculous builds look unfinished or people who are new at ship building
Cutie patootie
Skyfield?
we all have our preferences. Some people like sleek warships. Me, I like my space potato
what?
xD
Ps thanks for the tip I now hate ambassador habs a little less now I put blue lights in
panther clipper
Yeah I'll work with what I see and get back to you to show what It looks like
Oooh it's a very new ship
hm
Yeah, I think ambassador suffers from being a bit too much of the same thing. That does make it a good canvas though
Ambassador is very Star Trek 


u fumbled that 2 times