#Ragins Train Sets
26963 messages · Page 27 of 27 (latest)
mood's a thing for cattle and loveplay I getcha
idek what that means lmao
Dune joke
Dune movie clips: http://j.mp/15vL0kZ
BUY THE MOVIE: http://amzn.to/snrk0W
Don't miss the HOTTEST NEW TRAILERS: http://bit.ly/1u2y6pr
CLIP DESCRIPTION:
Gurney (Patrick Stewart) challenges Paul (Kyle MacLachlan) to a round of shield practice, which ends in a draw.
FILM DESCRIPTION:
David Lynch wades through dark waters in his adaptation of Fran...
right at the 1 min mark
oh lmao
I like how the signals just stick out of the station roof lol
it's like when I put signals under a bridge
This is a train order signal, its only purpose is to tell the engineer if they need to pick up written instructions from the operator (station agent). Green = no orders, yellow = slow down to grab a hoop with orders attached, red = stop and sign the orders to verify you received them.
It has no block information, and is controlled by a big lever inside the station beside the operator’s desk.
The operator gets the written instructions from the dispatcher (signaller) by telegraph.
Comeng Tangaras done
i heart multi level ee em yous
nj transit edition eventually™
an NJT transit version of these?
would be kinda cool tbh
talking about the mlv3s
oh yh, I'll do them soon
so same basic concept
now that I have the code for it
both in real life and in game lol
yee
I shouldn't be surprised you know about a seemingly too tall signal
[this joke is probably funnier in my head]
Heheh
some ACMUs were converted into unpowered coaches in the 80s, compleate with new interiors.
Interestingly thay operated as 1st class coaches, although (to my knowladge) in it's original electric form there were only basic-fare railcars....
also suprisingly the unconverted ones had a bit longer service lives...
goober
tbf it is very flat so I'd be keen to re-do it
or at least the roof
Lol the unbuilt alco designs looks funny
guess who drew a locomotive in the wrong scale and now needs to re-do it?
rararararararararararara
becoming violent
It can be a fictional narrow or broad gauge vehicle :3
yee
onto the pile of locos that I can't use that I'll add to something else in future
goober
look I've had 3 days so far of constant social events
my brain isn't working as it should
I haven't left the house in three days :3
Was supposed to on friday at least but the work got cancelled
nah its too cold
_>
I've gone native up here
as soon as its below 20c I freeze now
Condolences on being Australian 
well might have something to do with the houses up here being made of crepe paper
nah, Australia no.1
lmao, don't get me started on my opinions of the BCA
and I'm living in an old workers cottage
annoyingly the construction code in NZ is so much better
At skin cancer probably x
Glad i don’t have to deal with the deadly laser xxx
power bill be damned i'm putting the heater on >_<
tbf we are lmao
that's what I've been doing to me roommates chagrin
I live by myself so I only have myself to complain at 😛
valid lmao
I think if I lived alone I'd go a bit mental
I need a base level of social interaction or I go rabid and start chewing through extension cords
VR E class done 🙂
pantographs are munted but that's a template issue which I'll fix in future
dissapointed
tbh that was a weird year lmao
also I wanna do some early mixed traffic fictional DC locomotives for ORP
so I might see if I can do 1 or 2 while my hair dries
8 long 2-Co-Co-2 or 7 long 1-Co-Co-1?
Aww it's cute
trying to do something akin to early electric locomotives in japan since they tended to be built in the UK and for 1500v DC, so they'd be similar
but it's annoying because there's not references
I wanna see a balcony boxcab in ORP
2-Co-Co-2 it is then
Something like the EF50
yee, that's actually what I based it on lmao
but I'll do it as broad/standard gauge around 1924 or so
as a what if NSW or Victoria did some long distance electrification alongside the suburban scheme
balcony electric locomotives kinda go hard in the SRA scheme
I do also want to do another fictional locomotive just before the start of WW2 as in the late 1930s NSWGR was considering electrification to Goulburn
yeah 🙁
it's odd because you'd think they would have gone for either the northern or western lines first
no idea why they were considering the southern line
also for the 1930s design, idk if I wanna do a boxcab or something more streamlined
actually I might just do an Australian version of the PRR L6/P5
cute!
I think this works as a late 1930s electric locomotive?
Does it have Buchli drive?
if you want it to I suppose
Just got announced today that VIA Rail is getting new long distance locomotives built by Stadler
And they also dropped renderings
Oooooh, any more details on them?
Also thats an annoying livery to do
They will be diesel battery hybrid locomotives and will start service in 2029, with 45 being built in Spain and from a new facility being built in Montreal
Any links? I'll need that for my list
MONTREAL — The Canadian government will spend Ca$1.6 billion (U.S. $1.14 billion) to buy 45 new locomotives for VIA Rail Canada from Swiss-based Stadler, officials announced at a press conference today (July 29). The diesel-battery hybrids will be used in long-distance, rural, and remote services. As part of the agreement, the government will ...
Also, they share a similar design with the EMD F125's owned by Metrolink in Los Angeles as those built in partnership with Vossloh which was bought by Stadler
Thanks
Thats a bad omen then lmao
STADLER?????
Hopefully they do offer them here in the US
Yeah
Hopefully this leads to competition with Siemens in the North American locomotive market
There hasn't been any real competition since EMD and GE between the 50s and 90s
via is really following in the footsteps of translink and going full euro lol
i wonder if they will get stadler to do their long distance coaches as well since ik stadler has done some for the rocky mountaineer
just an little question.... Batterry-diesel hybrid seems to make little sense in an mainline diesel loco...
i believe the presence of a battery allows for greater acceleration due to regenerative braking providing power to the battery, which can then be used when the loco needs to accelerate
i think that could help with providing a bit more power in initial acceleration since a lot of via rail long distance trains are really long
if you've got a lot of downhill braking zones the battery electric basically gives you free juice by doing regenerative braking instead of traditional
it's not humongous power savings but there's a canadian truck manufacturer doing the same thing for heavy logging trucks etc. that just got approved by environment canada to start selling em
I think for their stuff it was a good 20ish percent fuel savings over a traditional mechanical transmisison - but that maffs gets muddled up and isn't directly applicable for trains because they're already doing diesel motor spinning a generator and running at a constant RPM.
maybe it's for shunting the loco without turing the generator on?
Yeah, they could feasibly do suburban movements on battery as well then fire the generators back up when they’re out of city limits.
Anywhere you’re using an electric motor already a battery with a decent controller behind it is generally a positive. Doesn’t seem to really matter what the application is unless it’s stationary plant at a fixed load
bored and need to get my mind off things
someone give me something relevant to draw lmao
given the fact that these were exported to a lot of countries, how about an Skoda electric loco?
they're not relevant to any of my sets
but adding some what if.........
it needs to be a realistic what if though
I couldn't see any of those being imported to any country in Oceania/North America until the last 20 years
tatra really tried to export trams to new orleans in early 90s
it was also tested in san francisco if I am correct
Mexico count as north American right ?
yee, of course
yeah, but that was with trams, not mainline rail vehicles
thay exported some electric locos to italy....
Oh cool so I had some suggestions but I was wondering if these may have a varient or is similar to another locomotive
Italy is in Europe
oh?
These 10 ton 750 Volts DC electric locomotive was built by General Electric in April 1929 and was originally purchased by the Potosi Mining Company of Chihuahua to operate on the 2 ft 6 inch (762 mm) gauge line that ran from the Robinson estate, south of the city of Chihuahua, where the plant foundry was located, to the mines of Santo Domingo located north of Santa Eulalia, covering a distance of 26 km (16 miles).
There's also the f59ph pulling budd spv200 cars
I'm finding them rn kinda obscure
easy, lmk what you find
Yeah but Australia is just north of Italy so it totally counts
🤣
your jokes displease me 🙁
oh dear...
Ok legit I search and it's has 0 information on anything
Only the model voltage and gauge
Nothing else
Probably have to search of a sorta similar range to that
rip 🙁
There's this bo-bo-bo box cab
yee, I've already got those iirc
This ?
That thing looks wack, I love it
wtf is that?
I've not see that before? Presumably a rebuild?
Yep SLP series of Nacionales de Mexico! Take parts from whatever damaged and non-operational engines you have laying around and turn them into this.
Here's some other examples
There were a total of 6 engines in the SLP series, since they all used different parts they all looked slightly different form one another.Most would serve in the central area of Mexico with (I believe) only one being assigned to the Ferrocarril del Pacifico on the west coast of the country. From what I have read they were well liked by their crews for their reliability and maneuverability.
Unfortunately, none of these very unique engines were preserved beyond the late 1980's maybe early 1990's
7473 shown in this photo, known as SLP-5 and was put together using parts from an F unit and an Alco RSD-12.
what?
E60 sold to metro transit (quebeck?)!
draw the HST+mk3 coaches from tren interoceanico maybe?
What
EA015 sold to Metro Transit in Quebec (?)
at the bottom
Oh that
So basically they attempted to sell/lease them to Montreal's AMT (commuter train agency) for use on the electrified Deux-Montagnes line. The AMT did not decided to use them and all were scrapped
Sad 🙁
Yee, I could do those at some point
And far too big as per usual
I feel like being annoying
I should add more obviously queer stuff to annoy conservatives
I'm gonna add so many pride flags
it's a set made by a trans woman, my existence is political
remember that the set is used also by other people, that may find this offensive.....
why would people find my identity offensive?
Anyone who finds the existence of trans people offensive is an audience we can do without 🙂
So let's not start this again, seeing as you've already been banned for this once
sorry for causing admin problems again lmao
it's been a week and I felt aggressive
Understandable 🙂
🏳️🌈 🏳️⚧️ 🏳️🌈 🏳️⚧️ 🏳️🌈 🏳️⚧️ 🏳️🌈 🏳️⚧️ 🏳️🌈 🏳️⚧️ THESE COLOURS DONT RUN RAAAAAHHHHHHH 🏳️🌈 🏳️⚧️ 🏳️🌈 🏳️⚧️ 🏳️🌈 🏳️⚧️ 🏳️🌈 🏳️⚧️ 🏳️🌈 🏳️⚧️
Huh the ndem had some dmu build by metro cammell
met-cam ❤️
so aperendly thay were one of the manufacturers that exported literally everywhere.....
exported to a lot of countries yes
Well, that's North American vehicle engineering for you. Far too big for the job and overbuilt
unfortunately
why too big?
Seems to be typical size for passenger locos
Yee, I spotted those lmao
Hey man, would really prefer you answer my question from earlier before you keep posting in here
Seemed like you were implying that you find LGBT offensive
More queer stuff in sets is always good, people who take issue with it deserve to be made uncomfortable and not respected
^^
Something something you shouldn't tolerate intolerance
The only emu type on Cuban railway
Here some Technical specifications i forgot to add
Builder: Carriage & Wagon Co. England, 1966.
Model: Metropolitan-Cammel.
Class: ED
Track: Wide 1,435 m.
Railroad in which they operated service: National Railways of Mexico.
Rated traction power: 462 hp.
Maximum speed: 111 km/h.
Traction diesel engines: 2, Rolls-Royce.
Weight: 48,800 kg.
Length: 25.78 meters (from coupler to coupler).
Width: 3.28 m (from handrail to handrail).
Height: 4.50 m.
Trucks: 2, with springs, 2 axles on each truck.
neat
although I feel Cuba falls more into the category of South America
like I only wanna focus on the US, Mexico and Canada
not opposed to doing smaller self-contained train sets in the near future though...
yeah, it's weird
Alright so it's based on the aln.668
always tickles me to remember that chihuahua is a place
So these cars had 2 liveries
Red and cream then 2 tone blue with a red stripe
They had two 245hp underfloor engines per car
Don't know which type but possibly something like what their italian counterpart
tovía FIAT model ALn 668.1403:
- Length 22.11 m.
- Width 2,9 m.
- Height 3,5 m.
- Capacity 68 seats, originally divided into: 8 first class and 60 second class.
- Wheel diameter 0.910 m.
- Hydraulic transmission. FIAT 5-speed manual transmission.
- Power 2 x 125 kW 480 hp.
- Top speed 110 km/h.
- Type diesel engine FIAT 201 S with 6 cylinders. Direct injection. BrownBoveri VTx 150 turbocharger, 10,676 cc
do you have links to any of that? I generally prefer to find sources to read for myself
The one for this
https://www.facebook.com/share/p/1JkpTYutGa/
Weird I legit found the site providing info for the metro cammel units now i can't find it
not sure if these were mentioned already, but Quebec imported some German DMUs for a tourist train
there's also the random TEE sets they used in northern Ontario
oooh, what are those first ones?
I believe that's a BR 628
ooooh, cool
I've been on those
oooh fair
guess they don't ride well since they seem like a german pacer?
It's got proper bogies at least
didn't feel that much different from an Endeavour set
oh yh, I swear I read they were only 2 axle?
idk
fair enough then
maybe, or I misread something
not only
thay also had american interurban cars
nono, answer the question from before
Wait that's the first time I see this
my friend
I do not want to offend You.
I just give You tips on how to make the set target an broader audience
yes, but I would like you to explain why people would find LGBT stuff offensive
since it seems that's a position you hold
politics in my country. LGBT is used as political tool...
in what way?
I learned of it a couple of years ago when they announced they'd be cancelling the service lmao, but it got reinstated basically immediately
Do we really need to talk about this here?
Il'd better not talk about this
(Plz dont ban me)
Lol imagine canceling it and getting immediate backlash can't be north America
you're the one who brought up LGBT people being offensive
apparently they used budd railcars initially, but maybe 10(?) years ago they imported some stuff from germany for reasons?
There's also these ex-night star coaches
and now if you're saying that in your country LGBT people are used as a political tool, that raises eyebrows for me
Quebex is weird lol
its not even a commuter service, its a tourist train
Funny how they are retired before the 1930s STREAMLINED CARS
Always the fr*nch
answer...
meccanics is an other thing... some parts are freakin' hard to get nowerdays
it is used as propaganda by more or less radical ideological left.
Often the slogans etc. offend catholics etc.
I think you should answer him.....
her*
this should be enough
Let's get back onto the topic of trains
LGBT people are used as a propaganda by the radical left and that offends catholics?
more like LGBT ideology, but yes
I'll be honest, if someone is offended by LGBT people, they shouldn't use a mod developed by a bisexual trans woman
define LGBT ideology
us existing lmao
My bad
all good lmao, mistakes happen
that's my interpretation too...
maybe they have a different one though
placing LGBT flags and symbols everywhere, ecounceuring children in school to change thair sex, etc.
lmao there we go
so LGBT ideology is right wing conspiracy theories? so nothing new
So here's the thing @mental musk, we're not in Poland, we're in Australia, so stop worrying about what what Ragin should be doing with her mods, the only relevent point here is does it offend YOU. And if it does, kindly fuck right off.
Bear in mind that cultures differ and in diffrent countries people react diffrently on same things
The grf will be aviavable worldwide afterall
Take responsibility for your own biases, stop trying to build a strawman.
I think you should really stop
also if you're making the point that people find LGBT people offensive, like we know. I've been called slurs in public before
shout out to the drunk guy at St Mary's station who accused me of being trans a month before I came out as trans lmao
Lol
I get call slurs daily so it's normal for me
omg I hope not :/
I mean a certain amount of slurs is pretty standard for living in australia in general
I'm asian so discrimination here really bad so you could get them daily
It's happen so many times I just act like nothing happened tbh I don't care about what other people say to me
Yeah that'd happen in australia as well but its usually just the ignorant bogan casual racism here
but regardless, people find my existance offensive, I don't think you'd bring up "people finding LGBT stuff offensive" just to remind me that transphobia/homophobia exists, I'd obviously be aware of that. My impression is that you brought it up because you find it offensive and want it removed
He's banned now
Really ?
oh god I'm sorry :/
rip
God damnit
well that was fun. I just wanted him to fucking own it instead of tip toeing around it.
oh ab so fucking lutley
like don't be a coward and try and be nice about being transphobic, like that pisses me off even more
^^
like I'm sorry if you find me existing "offensive" then that's your problem
Yeah if you wanna hate on me nut up and hate on me don't be snivelling coward about it
How did we get from cho cho trains to this due to 1 person baffles me 😭
lmao
Anyway
I've been having really bad dysphoria as of lot so my desire to be more annoying as a trans person consequently increased
It's been a long time coming, not the first time that person has expressed homophobia/transphobia
but I will get back to drawing soon
Just take it easy on yourself. It's a long road.
Yeah take care of yourself first
I’ve been lurking for 25 minutes waiting for everyone to get bored so i could ban 
Nothing will happen quickly, but you will catch yourself in five years time wondering what the fuck happened hahaha
I guess better luck next time
dw, I know. It's been a combo of work stress and dysphoria about things that I can't actually address
but I'm also in a position where I'm far more comfortable with myself, especially compared to pre-transition
oh yh I'm looking forward to that lmao
riiiiiiiip
Yes they've been repeatedly given ever greater lengths of rope
and they've managed to hang emselves both times
The first time was for a week, they managed to keep it to themselves after that for a good while
I helped this time 🙂
it was bound to happen eventually
Yeah I must admit I decided to get in on the action this time
I tried baiting them a few months ago but they didn’t bite
I just wanted em to stop pussying out
Im suprise y'all gave him a rope
well I'm not in his area code so I can't give him hands
🦀🦀pitgoras gone🦀🦀
🤣
I had 2 people blocked on this server, now only 1
Citizens celebrate: mentions of Polish trains in unrelated threads drops by 95%!
I should get a badge for what I've achieved
also, his bio translates in english to "I have always been, am, and will remain peace-minded. I dislike tasteless, juvenile, or anticlerical humor. A confirmed "old fogey" and social conservative. Always ready to help."
like c'mon man, you're a conservative, just own it lmao
Oh, it used to be different
Something about being a Catholic patriot
oh so he's the catholic that finds it offensive
Yeah
Yeah I know it was him
so yeah he was talking for himself
I wanted him to fucken own it lol
He knew he’d be banned if he did
Anyway found this goofball
NdeM!
There's also this by Ross Roland during the oil crisis you can see how it would turn out
Should be easy to draw, just use the F40PH cab or something
yeah lmao
OMG I want it
yee, funnily enough I did that guy in the first incarnation of NARP, just haven't redone it
A 4-4-4-2 with a diesel unit behind
ragin gimme the ACE3000
gimme gimme gimme
just take a big fat diesel body and slap it on a steam running gear
tbh I should re-do it
I did do it in a misc pack ages back
😮
Santa fe also had smth similar
Wait it it a 6-4-4-2
cursed
patience woman
I'll probably do it later since rn I'm lazy and don't want to animate
tsk tsk, bait to waste
GO transit apparently took a bunch of their old single deck DMUs and turned them into cab cars, but its absolutely cursed to look at bc none of the other coaches used were single deck
also they later ended up in northern ontario as regular coaches? no idea why they did that
yee, I'm tracking down a bunch 🙂
actually I should do that railcars
I was planning on doing them ages back just never did
I'll do the DMUs first
This funny thing intended for the canceled millennium train
that's cursed lmao
I don't think it gets better
Oh yeah they intended for a d-d variant of the gm class classified as at20d and the a30d
There's many more but I'm gonna stop here
That looks sick, I should steal that design for the vactrain set
Oh yeah here's ge bid on the then new American flyer or the acela as it became known later
I already did that one lmao :3
also on my to-do list
If you wanna add some silly stuff, Ontario Northlander had a canoe car specifically for canoes and kayaks
I'd be tempted but it'd be too niche
This makes me think of the fictional trains drawn for A-Train for some reason
surprised the last 3 coaches arent articulated
if we're going to talk about canadian european trains we can't ignore the elephant in the room that is the o train stadler flirt as well
Kinda weird
Perfectly normal mainline trains in Europe, oddball light rail in North America
Weird how north america classified them
yeah i don't get it either, whats funny is that the line they run on is considered a mainline railway... so you have european mainline trains considered as north american light rail trains operating on a north american mainline railway
They are classified weird because they don’t meet crash safety standards to share track with normal North American trains. So they are considered a separate system and must be physically or temporally separated (freight trains run at night).
Considering the freight industry is held by tape and oil I do wonder if it's really safe
crash standards between trains are BS, just make sure your signalling system works
standard for worst case scenario, mhm
Will the Baldwin DR12 Centipedes come into the US GRF?
True but they don't account for idiot drivers
Yeah, the Talents were first used, then later on they were replaced by the Coradia LINTs, and the Stadler FLIRTs were ordered when they expanded Line 2
These are what the Talents looked like btw
one day, I don't wanna add new content, only new liveries
You could add via rail livery in the budd streamline coaches
I'll probably just add via liveries to the classic coaches
they were design specifically to cover the early Amtrak/Via coaches
For locomotives there's the f40 p42
Gta Sa liveries would be a laff
And fp9
tbh I have considered it...
that's an FP9ARM, and that's on the rebuild list
Would be fun
also I wasn't originally going to include the FP7/FP9, but I re-worked things so they're now doable
Also via rail did consider bi level coaches bit clearance issues stopped it
yee, I know
i found the drawings of them
The funny toaster before the toaster
Although it was considered during ge own e60
yee, although I'm not gonna do it because it wouldn't serve a purpose
it's on the backup list though
did it months back
Oh
the original AMT-125 design I'll do as an XPT style push-pull
I'm suprise there's so many good unbuild designs
cursed Genesis'
I have more actual liveries to do, but I think I'm burnt out lmao
this is the world we live in 
Metra would never operate a Genesis lol
but fnnuy
Yes
So it first appeared in expo 86 then again at emd event in 2002
Or the image from the site I got lied
fair enough
although tbh I don't think I'll include it because it doesn't seem practical
Fair I don't think an 18 axle high speed unit would be practical in anything 😭
Probably one of the most fat boiler on a narrow gauge loco
You need to do a bright red and orange, blue and white, and purple and lime green ones. Then you can have the Evangelion Neon genesis’.
ducks
weeaboo 🫵
ya girl finally spent 30 seconds to add a via rail livery to the rapido coaches lmao
would it not be genesi for plural?
I have a social science degree, don't judge me for my english 🙁
more liveries for the Budd Classic cars
so now you can properly early Amtrak and modern day Via
Observation cab when
observation cab?
theres already a couple
wanted to do some more liveries before bed, but got some background code tweaks done
amfleet liveries done
Where phase V
I have no clue how to do that one lmao
it would require 3cc or some extra code or something
It's a tricky one, fair enough lol
I think NAPR has a good rendition of it, maybe check that out
Phase 7 kinda wonky to do
I'll look into it
I still have no idea how I'm gonna do it on locomotives since I'd need lighter/darker shades of CC1
also I need to do more games with snow, Amfleets in snow go hard
the opengfx2 snow also looks so good
yee, I know, it's those extra bits that will be hard to do
That's phase VII
I know
Like I said phase 7 would be wonky to do
Also interesting how phase 6 was only on some locomotives
And coaches
since you’re doing liveries are you gonna do the new go transit livery and maybe other liveries for the bilevel cars? i think west coast express, sounder, front runner would look nice
Well, I think she would have to make the MPI locomotives first
And the F59PHIs
Pretty much
Also I am limited to only some liveries too
I only have 50 IDs to use
???
Each locomotive only has 50 ids assigned, otherwise I exceed the 65k id limit
Surely you can borrow from others though?
I could but I'd also prefer not to
That would just make the code overly complex compared to the way it is now
Fair
@strange quiver I have no idea what's going on with that PR that person has just raised but it looks like absolute dogshit
Oh God I've not seen this
I'm gonna have a look now lmao
But I did also just leave to go out for drinks with a colleague
looks like four months worth of changes across 43 commits that they've just tried to yolo merge
Yeah...
Reading some of the changes and it seems like really minor/weird tweaks?
I can't see any comments or anything so idk why they're doing it
But all the changes are to things that are intentional design choices
Just had a scroll through on my phone (I hate GitHub mobile) and yeah it's just odd. Doesn't even look vibe coded or anything, just like 50 random patches that don't really make sense
I'll look into it this weekend lmao
Yeah, like I'm not changing max speeds from 115kph to 120
Like why?
The reason its 115 is because IRL most locos in Australia were limited to that
I like the shinkansen speed commit, because we all know shinkansen run at 131kmph and run in Australia
I dont think its even worth looking at tbh
They added a Shinkansen lmao?
Close it and move on with life.
Yeah, but I wanna see if there is at least something interesting there
Also I'm on the train atm so I've got nothing else to do
Nono haha, they just changed the speed of a couple of trains
Yeah fair
But yh its weird that it's seemingly nothing else
look I'm sure if you fondle around a turd long enough you'll find something interesting but it will still stink and now you're covered in shit
True, but still lmao
They just increased it from 130 mph to 131 mph?
Whyyyy?
Can I reduce the metroliner speed to 129 mph out of spite?
Time to randomise max speed by +/- 1 or 2 😋
If someone annoys me I reduce the stats of their favourite train
Yeah
Although this person hasn't annoyed me and saying that makes me feel mean
I need to save my bitch energy for other people
Yeah I am already curious if they just meant to keep this as like personal tweaks, and hit the create PR button by accident
Potentially? That would be my assumption
Or they're just working on their own version or something
Has to be incompetence one way or another, if you raise a 75k PR to someone without speaking to them you should be taken out back and beaten to death with a hammer
I guess lmao
I kinda want to make a script to randomly change the whitespace in all of the lines of code and make a PR now 😎
Maybe they've messaged me on github or something but I haven't checked
close it and move on
Do that to my set and I'll explode you
Accept the PR and then immediately make a PR reverting all the changes
No 🙂
oh god no
:(
New Haven comet set
I’ll take your bitch energy and use it myself on other people
I think you need to take estrogen/progesterone to get it
Also came out to a coworker at a pub last night and she's supportive 🎉
Ominous
:3
oh god we’re multiplying
I typed in virus multiply and this was the first result
QR ICE units done
the german mind cannot comprehend the impressive speed of 120kph
don't forget about HST at home, XPT (only goes 100mph)
VR E-Type Coaches done
Mostly 130kph
redid all the ids to fix the errors (there were lots of overlaps with wagon ids) and then finished up these Comeng Interstate coaches
these were proposed to replace earlier interwar and postwar stock on interurban services, but were cancelled in 1979 when the NSW PTC chose to investigate a new trainset based on the British HST
having brain worms about doing that Australian version of the Amfleet again
It feels weird seeing a narrow gauge c-c locomotive pulling coaches
pretty common outside of the US though
Those locos were designed for Australia originally
Southern Aurora coaches done
these were the main sleeper coaches used between Sydney and Melbourne from the 1960s until replaced by the XPT sleeper service
they had a big neon sign on the back which was cool 🙂
hard to replicate in openttd but I think the blue at the back does it
oo sweet
A trainp stamp
Nice
Don't call it that >:/
Commonwealth Railways stainless steel stock done
you can make so many stupidly long trains with these
you can piss off so many signallers trying to fit them in
A d-d version of the gm clas
yes, it was the proposed A32D utilising twin naturally aspirated 16-645 engines
it was rejected in favour of the AT26C (CL Class)
there was also a proposed AT20D utilising a 20-645 engine that was also rejected
Ye I know that
has anyone got any specific coaches they want done?
I've got one or two I wanna focus on but idk if there are any additional ones people want prioritised
Do you have a list of everything you've added to the Oceanian set?
yee
https://docs.google.com/spreadsheets/d/1Fj6Y5M03zOG2wjGIkY0y61pFTRm4pEQkCMxz0FVdcgI/edit?usp=sharing
here
ooo
Huh no steam or is it just my download version broken
there's no steam locomotives in the version on Bananas
that's something I'm looking into
Those are the ones that were in Trainz right?
potentially?
these are the main coaches QR still uses
QR SX Coaches done
gonna do some more liveries
also ya girl is sick as shit and I'm off work today lmao
and the NZ livery 🙂
fictional suburban version of the Amfleet which I thought would be nice
Tbh I didn't know what livery to do so I just gave it a met livery lmao
I can have up to 15 liveries for it though
All passenger wagons
that's decent amount ngl, nicey
Spirit of Progress coaches done
A literal brick on wheels
pretty much lmao
Yo wait what would the Comeng K sets have looked like and why didn't they get the contract?
pretty much the same just their proposal was for a 3 car set with 27m long vehicles
they didn't get the contract because at the time the NSW government wanted to direct manufacturing to Newcastle in light of the BHP announcing closure
iirc the SRA did like to split contracts though, and comeng did get to manufacture some parts for the K sets though
Didn't the steelworks close in the late 90s?
they did something similar with the Tangaras (Clyde/Comeng made the bogies)
Didn't know abt that
Were there any drawings?
yes, but the BHP was working with the unions and the state government in the 80s to work on the transition
it's why when the steel industry collapsed in Newcastle we didn't end up with a rust belt like in the US or UK
not that I have on me atm
Ah
it's a mountain tangara 🙂
apparently the overland back in the day used these american style pullman coaches
I didn't know these existed, but I guess I can just tweak a NARP sprite lmao
VR Z/N types done 🙂
will do more V/Line liveries but I hate most of them so I don't wanna do them
Ngl I prefer the met livery on the sprinter more than v/line
anyone got any suggestions for what to draw this arvo?
I need something super simple because I have little to no brain power
👁️ 👄 👁️
too complex lmao
I need something boxy
I got diagnosed with anemia on Friday and I have little to no brain power atm
Maybe this ?
I've already done both the locomotive and the carriages
Huh I have nothing that you might not have done
It do be like that lmao
but I also can't do anything that complex atm, any hood locomotive is beyond my capability atm
Yeah nothing new
Maybe do some MU/passengers stuff then?
I might tbh
I'll see what I wanna do maybe
more VR B class liveries done
did AN and Commonwealth Railways too as a treat
the VR and SAR did consider a joint order of what would become the EMD ML2 (Aka the VR B class), but the British government intervened to stop them buying american locomotives
SAR wanted diesels ASAP and bought british based diesels (the 900 class) while the VR decided to wait until they were less strict
I didn't know I needed NSW B class
gonna do more liveries today because I'm quite hungover and still anemic
but also life update, came out to my parents and they were supportive 🎉
congrats :3
thanks, it was very scary lmao, and my family didn't seem to expect it
oooo YAAAYYY :D that's very nice of them, I'm glad knowing that :3
yeah, I'm super happy about it
also
NR class done
The rear loco is missing an orange stripe?
C44ACi done 🙂
also gave it broad gauge support. IRL they're only standard gauge, but I feel like if there was an order they'd do a broad gauge one
might do a broad gauge version of the NR Class but I'm not sure since that was more of a single operator order
GT46C done (also in Standard/Broad gauge)
Now I just need to do the ACe model, but thats a job for me later today
This this a funny looking loco
yeeee, they're on my list
iirc the only loco sold with that cab/body style was the NSW 43 class funnily enough
Ye
That's quite a livery. Racing vibes
Lol
stole this from FB but american style diesels in BR style liveries kinda go hard
GT42CU-AC's done 🙂
Off topic -> Ha. Those ground/stone sprites look like they're out of Caesar 3 😄
I'll take your word on it since I've never played it lmao
Ah, it's about as old as the original TT or TTD game, not sure now and lazy to look up but mid 90s basically. Tho a bit like this, there's an opensource version and it has a separate patch pack that does a lot more too. (called Augustus)
I'll have to look into it at some point then 🙂
It's a "Rome-builder". Basically you start at the lowest rank of whatever Roman hiearachy there was and build towns while dealing with commerce and military plus generic city management stuff and you try to make your way to the top level
There was a 4th version (ie Caesar IV) as well but it's not that good imo
oooh neat 🙂
GT42CU-ACe done 🙂
also low key the old QR national livery slaps, I just wish I could do eyeliner wings like that without messing them up 🙁
I also recommend Augustus, it's like the JGRPP of Caesar 3
are there any major types of locomotives missing?
I think I've got everything covered, main additions needed are just narrow gauge diesels
Are there dual-mode locos? Generic question, just since you asked if anything was missing. I started adding one or two into my set so now I'm thinking. 🙂
there aren't any in Australia or New Zealand 🙁
only electro-diesels are the NSW R set DMUs and a yet to be manufactured set for Wellington
No ng diesels ?
there's plenty, just needs more
I have like 3 but i think you might have done them already
Wagr x class
Qr 1250 class
And the commonwealth railway nt class
this is done
other two are on the priority list though
wait no, NT class isn't done
all 3 are on my priority list though
also, NSW 45/SAR 600 class done 🙂
L A R G E 4 8
Steam :3
Sooooon
I think I'll do some more narrow gauge diesels, and then the only thing left is steam locomotives and freight wagons
This is such a silly-looking train
Very silly and very unreliable
They had over 600 design faults mostly due to their engine
They were so bad there was a royal commission into them lmao
And with the perseverance of Midland Railway Workshops staff that kept the locomotives operating
I think they had an hp of 1200 but they de-rate it to 1045 ( officially quoted at 1000)
Also le funny
Yeah lmao
Gonna wait a while before I do those because I have something cool I want to do
Tempted to shuffle locomotive ids again just to make the 45 class broad gauge too
Like it makes sense, just SAR never operated any on broad gauge also VR liveries would go hard
Maybe add the class 86 🙂 ?
Already drawn
No like in fictional liveries
Oh yh that's planned dw
Doe that mean they'll be providing better service outside the corridor?
(yes im late, totally forgot about this channel)
Not sure
Hopefully
They still haven't announced a contract for the new long distance rolling stock tho
Would be nice if they did, i mean keeop VIA number 1 and 2 as they are but add other services would be nice... A couple night trains would work for them too im sure...
Oh, theyre getting new cars too eh? Just coaches or sleeping too?
Both
They're even planning on getting new dome cars
Hopefully those replacements come soon. Some of the cars are almost 80 now
Interesting, curious if ill happen to move some of those myself sometime.
I got one kf their venture sets when thise were new, had a UP engine on it, the thing was ancient and horrible to conduct in....
WAGR X Class done, kinda hard to do these liveries but I'll re-work them later
The Prime Minister, Mark Carney, announced that, for the first time in four decades, VIA Rail passenger cars will be built in Canada. The federal government is investing more than $4.7 billion for VIA Rail to acquire and maintain 313 new passenger rail cars from Alstom Canada.
We’re getting new train cars in Canada
So Alstom's been selected for the new long distance cars, eh?
I honestly thought it would've been whatever manufacturer Amtrak selected for their new long distance cars (which is more than likely Siemens)
But glad to see VIA Rail finally getting the upgrade it's needed for a while now
While the classic Budd cars will be missed by railfans, they're in need of a replacement
Seems like they invited almost every manufacturer
Do we know what routes the HPT would have operated on had it made it to service aside from the intercapital ones?
as far as I'm aware, it primarily would have been Sydney-Melbourne and Sydney-Brisbane
funnily enough I was at the tramway museum today and I found a report on the passenger car specifications
Oh yeah I work there
oh lmao?
well I was up at the north end emptying out the john dunn container today
Yeah, havent been there in a while tho bc me leg
Oh yeah I work in Archives so I sometimes have to help clean out containers with stuff in there like that
Sometimes its just silly ads from the 80s with a guy who looks like Borat
I was kinda thinking the SRA would've used them to provide a secondary train to dubbo
ah fair, that's mostly what I help out with lmao
but yh, today we cleared out the dunn container and sorted it, so now it's in the substation which should help it be more stable
maybe, I still need to go through the documents fully
but I'm gonna do a video on it soon-ish
https://youtu.be/1HmtEoc6INU Thats at least what this news report said https://youtu.be/1HmtEoc6INU
This News item was aired on channel 7 news in 1990
Footage: Channel 7 news Sydney.
#trainlink #sydneytrains #transportnsw #newsouthwales
Check out our great merch on Facebook
https://www.facebook.com/profile.php?id=100087877006326&mibextid=ZbWKwL
*************...
It says 1990 but the acting premier was ron mulock who was in in 1986/87
He got the date wrong
yee, that date would actually line up well with the HPT development
iirc the specification was issued around then
actually I also found a giant report on specification 2542 from 1979 that I need to look into
Noice
Was it on stuff like the planned interurban xpts?
https://youtu.be/2OMXKAzxZrM Found another video
This News item was aired on channel 7 news in 1990
Footage: Channel 7 news Sydney.
#trainlink #sydneytrains #transportnsw #newsouthwales
Check out our great merch on Facebook
https://www.facebook.com/profile.php?id=100087877006326&mibextid=ZbWKwL
*************...
Seems the lnp didnt like the hpts too much
well that was just the original XPT proposal
the train we go was an evolution of that idea
I mean according to the old railpage site thats down now in 1979 tenders were called for 100 vehicles which would have been 8 regional xpts that would go to canberra, albury, dubbo etc and then 6 interurban xpts to run to newcastle wollongong etc
that's not in the specification I've seen
it was originally for single unit railcars, with the option of a push pull train for service to Wollongong, Newcastle and Canberra
I don't recall the numbers of vehicles though
The only sites that say this are wikipedia and the old railpage site but I do think it was probably the case but idk esp since the comeng books didnt have them
Ok wait nvm the railpage site wasnt down
the dates are slightly mismatched but otherwise its the same as the wikipedia article
I'll have to verify it myself at some point
I still really need to look into the XPTs but I've just been busy and dealing with health issues 🙁
O damn
Take care of urself b4 u go back into working on vids
You deserve a break
thanks!
it's just been annoying because I had lots of transition stuff the last year to deal with, and when I got a lot of that dealt with I had quite bad anemia and extremely low T which was not fun lmao
but now I'm better so I wanna get back into making stuff again
also found the marketing pamphlet for these guys
I've already done them, but interestingly they offered a railcar and a full MU version, as well as freight versions
so I might add the MU version to the set (the railcar version is already included)
also it's interesting because the pamphlet I have calls it the "railbus" and has an edited version of this image
so presumably that was the name they were marketing it under
Do show us the full pamphlet
once I scan it I will, it's my priority since it's the only known one to exist
also I found Comeng's 1979 proposal to spec 2542 (which would become the XPT) and it contains a lot of info on the early XPT, but annoyingly not the associated drawings
Those bud cars are way more comfortable to ride in that the venture sets are however.
Found this on reddit randomly, do we have it or is it on the list?
The Virginian El class
I think we currently don't have it or ragin done it but haven't updated the grf set
It's on the list, and I started it iirc just never finished it
This a bug ?
Yes, its a bug
Saw a derailed 82 class today
The poor boy 🙁
he's going quite off-track I can say
Also is this at moss vale?
Yep, moss vale
I'm so cool by how I can recognise random stations 😎
As a train expert I can tell you this isn't meant to happen
It kinda is meant to happen because the catch points prevent it from rolling onto the mainline
As a train expert I can tell you this is only kinda meant to happen
oh yh it's been like a month since I've done anything here. I'm not dead, I've just been touching grass and I'm gonna try to get back to working on things again soon-ish
but in terms of good news I've been out basically every night the past month and I've even started passing in public (even in my very masc work clothes lmao)
being out so much is also why I haven't done anything lmao
How did the grass feel?
not as of late lmao
Ohh gimme some of that rain to me 🥹
Haven't rain in a year like
jokes aside, glad you enjoyed all that
how's this doe 👀
yeah, no wonder they only wore it for 2 years
bruh im cooking it
i'm cooking it well-done
the only thing left is to do this whole thing with sprite compositing and I'll be unstoppable
So the ep4 in mcginnis livery is missing sprite in certain angles
🫠
they're stealth trains
already fixed in the latest version 🙂
in case any of you guys wanna read this
I'm finally getting on scanning this stuff but omg it stinks so bad lmao
The amount of designs comeng made for the HPTs was quite frankly ridiculous
and not all of them are even in the book lmao
Comeng tended to make lots of variations
this one has 60 alone
Hmmmm the hpt and the coach behind it has a pantograph
I wanna get back into drawing again, someone give me a recommendation and I might do it
also cool to flesh something out with more liveries
north american or Australian welcome
the death star
1:1 scale pixel art
jokes aside
welcome back!
I hope you get a job kickstarting landmines
hahaha
I've been too busy touching grass to draw trains 😔
both are worthy pursuits
cool
I wanna get back into drawing again
it's trenches out here
Wdym?
I'm just joking around, it's been ages since I started these lightweights
Fair enough lmao
But I returned to this so deeply that I was busy helping to help with the include patch, the graphics editor, the VSCode extension and also code restructuring
Sometimes it do just be like that
Aw fair
that's all that matters I suppose!
i mean, more NARP is cool. lol
I'm wondering if the long distance hunters ugl proposed were only to be used on the broken hill route
Also how many did they propose?
Vancouver skytrain fleet?
Would love to see it recreated in openttd
Also in another server I’m in, people are recreating fictional skytrains in the modern bc transit livery
Good news! I found them while looking for something else haha
I drew these in 2009ish I think
I just really liked the NARS Talgo push pull stuff at the time
oooh, I like some of those
I might actually do them
that Talgo I'll definitley do if only because Clyde Engineering seriously proposed it in the 90s
sooooon, just need to be in the right mood for them
This is what they look like in reality
decided to re-do that dual segment HPT locomotive that I did previously
I'm probably gonna do more NSW, AN and V/Line liveries for it because it'd be cool
also somewhat inspired by Jake's indian pacific locos
probably gonna steal a few of these ideas
The 320 class from Jake's drawing looks cool
It's always nice to see my old drawings come in useful 😆
The 320 class is basically a F59PHI but with 6 axles and a second flat cab end
I curious about the 600 class at the bottom looks like you want a bo-bo but I though it was a co-bo
I think I wanted a co-co originally but turned it into a bo-bo
Re-did that XPT electric locomotive thing I did a while back
basically an Australian dual-voltage version of this BR Class 89 design concept, except with XPT cabs
It seems you changed from a co-co to a bo-bo-bo
yeah!
yee, I like tri-bos
Which looks sick
Are all your rail packs on Bananas? Sorry I haven't been active here in a while lol
yes, but the latest versions are only on github as they're WIP
ooooh alr alr
Found comengs k set design
I like the paris style stuff but ngl i do not like raised cabs
Its just so goofy
Huh I didn't even see the cab window at first lol
also these seem longer than the standard suburban EMU coaches?
Look like the cab of the sar 2000 jumbo but more boxy and extended
yes, the cars were designed to be longer
So same capacity but less doors per train means longer dwell times
gallery car ass cab 😭
this is something Comeng had a bit of a fetish for, and they tried selling vehicles with a similar concept to NSW and SA on a few occassions
but they always got told "no" largely because of the dwell time issue
you can just make the doors slightly larger
Embiggen the doors
that's pretty much what they did with the milleniums and waratahs
heheheh
its done using another overlay sprite with the original blue and green CC's on it if you want to start pre-preparing
Sure, I'll take a look
Is this a feature in the next update?
No it's not going to make 16.0 I dont think, it's still a PR, peter needs more input/testing from people. But it'll hit JGRPP not long after it hits openttd nightlies I'd expect
Okay easy, I'll start putting effort in when its in JGRPP that way I can test it
But wdym with this? So like sprite stacking or something?
I believe so
Okay thats gonna be annoying to integrate into my work flow
But if its saved for special occasions it should be fine
Yeah I remember you saying there were some liveries you wanted to do that needed 3cc
Yeah, its mostly NJT iirc
But it could also be useful for making some liveries more universal
I have ideas on how to do it
did that electric version of the V/line G class that goes around occasionally and made it a dual-voltage locomotive
also did this guy in an AN skin
