#archived-modded-support
1 messages · Page 318 of 1
I can sort by Ascending and descending
And that itself seems to be taking several minutes to re order.
well that's done
I guess it was descending originally.
Ok so three of these are from Ridgeside valley which isn't active in the stardrop profile I"m using, and the other is from Professor Jasper.
You're just looking at the json files, yeah?
The thing that says ko also says "failed" for some reason and then Chinese text?
I mean at this point I may just be stuck
Hmm. I need to do some more thinking on this. I have to run, though, my nephews are here. Sorry we couldn't figure it out, Cer.
Hi everyone!! I am very new to modding stardew valley on windows and im having a lot of issues and ive followed a lot of videos and even stardew wiki and i have no clue on what to do :( so i wanted to hop on here and see if anyone could help me out here or try to guide me to see what i am doing wrong
hey there. could you tell us what step you're stuck at or what errors you're having? the wiki guide is definitely the most recommended
alright so, the first time i tried modding i watched videos and everyhting was going well and i went to load in to see if it was working and it said only 2 mods were in the game and there was no red text saying that there were any issues in any of the mods i downloaded but only two showed and it didnt say which so i went in the game to see what mods loaded in the game and none were there so im trying to do the process again but now trying to get my sampi into my steam will barely work
Does anyone know of a way to keep a bundle of mods together? A few of my friends are wanting to play the very expanded collection, but I have a normal expanded playthrough that I want to be able to access as well. If I throw all of the necessary mods into a new folder though, I get the error of "no .json files" 
Copy-paste the entire Mods folder somewhere else and rename it?
OK so you have:
Most recent SMAPI from the SMAPI.io or Nexus website
I'll try that
tyty
Unzipped somewhere
Ran the installer
Got the green success text
And you're copying and pasting the entire line that has the path in it, including the quotation marks and the %command% ?
yeah im pretty sure i did that i undid it and re did it about 20 mins ago then tried to redownload everything
So, when you launch Stardew via Steam, it loads and has the SMAPI console (the black window with text in) pop up alongside the game with 3 mods loaded?
SMAPI comes bundled with three mods
ohh oki
this is an important step because it lets you check that you have the right versions of SMAPI and Stardew installed and copied the launch options properly, and also lets SMAPI make the mods folder
and it will tell you in that console window exactly where it put the mods folder
my mods dont go to my mod folder :')
When you download them they will go into your Downloads folder. However, SMAPI can only load mods from the Mods folder it created
im so lost right now im so sorry
When you download a mod it goes to the Downloads folder. I've highlighted mine in this screenshot
SMAPI doesn't look in there
SMAPI instead makes a Mods folder, which is usually in the Stardew Valley folder like this:
i dont know, is it possible for me to share my screen anywhere?
In a discord call yes
i have that but my mods dont go there
You will have to put them in there yourself.
in your downloads folder
So, say you were installing...Equal Money Split.
When you download it you will get something like this:
im sorry ive never really used this cpu its new
first time using a computer?
yes and no first time trying to use mods on stardew on a computer
im a xbox player 😭
do you know how to get to your Stardew Valley game folder?
OK, telling you a method that will work regardless of where you put it
Rightclick Stardew Valley in Steam. Mouse over the highlighted option - on English-language steam it says Manage but it's always in the same place no matter what language your Steam is in
And then click this highlighted button
This will open a File Explorer window of Stardew Valley!
ohhh
yeah
FINALLY
So, open your Downloads folder with your mods in it, then do the Browse Local Files thing to open the Stardew Valley folder
I'll be using Equal Money Split as an example again
idk how to ss to show you and ctrl s doesnt work
ohhh okay ty
you should then have both Downloads folder and Stardew Valley folder open at once like this:
(lots of random minecraft related stuff in my downloads folder :P)
im still lost
OK. can you describe how you are lost?
is it finding the downloads folder? pasting the screenshot?
having both open at once?
my mods are in my sampi folder
You can open the Downloads folder in a second File Explorer window quickly by right-clicking the File Explorer window in the taskbar at the bottom of the screen and then clicking Downloads
so, you have the mod like this:
in your downloads
and you double-click that zip and you have this:
all my mods are in my smapi no matter where even in downloads
and you want that open and your Stardew Valley folder.
and you click and drag the mod you want to install from the zip to the Mods folder in your Stardew Valley folder:
it is then installed
they go in the Mods folder in Stardew Valley. NOT in any folder named SMAPI!
i cant get the mod of out my sma[i folder
it's not copy-pasting?
not with click and drag, not with click and ctrl+c then go to mods folder and ctrl + v?
ohhh im coping it im sorry
there was someone else with click-and-drag issues, not sure why...but copy-paste is a good backup
OMG I DID IT
You can also delete that SMAPI installer folder you have, by the way. It has served its entire purpose and now does absolutely nothing but take up hard drive space
congrats!
yes! That looks like a functioning mods folder!
CBJ Cheats Menu should now work! The default key to open its menu in-game is P
i have 800 mods, so my mods folder looks more like this:
but you have mods, not in zips, in the Mods folder!
oh my stars, thank you so so so much i really didnt think anyone would waste time to help me 😭 i really apprecite it you have no idea
Log Info: SMAPI 3.18.6 with SDV 1.5.6 (build 22018) on Microsoft Windows 11 Home, with 59 C# mods and 137 content packs.
Suggested fixes: One or more mods are out of date, consider updating them
Hi, I started a game with 2 cabins to play with a friend but now we would like to add an third friend to our world, would that be possible?
When he tries to enter the game he joins in my friend avatar
build a new cabin from robin's shop
Is that it then?
yes
Alright thanks
does anyone know why harvesting with scythe using cjb cheats causes the crops to just appear in my inventory without actually dropping?
or is another mod likely to be causing that?
that does not sound like a cjb thing
I'm not sure if this is the right place to post about this. I have a question about More Fertilizers. According to the description on Nexus, I should be able to purchase Organic Fertilizer from Pierre on Wednesdays in year 2, after I've completed Pierre's Special Order. I did Pierre's special order spring week 2 year 2. It is now Wednesday Spring 17 year 2 (week 3), but Pierre doesn't have Organic Fertilizer in stock. Do I need to wait a month for his stock to be updated? He's also on the island today, could that impact his stock?
Umm hi, I'm a mac player, and I just used smapi to download cjb, and it says this at the top of my stardew application, but I don't see the mod in game ? I'm just confused on why that is ;
have you tried pressing p?
Pressing P while in game, mind.
Oh!
it worked! tysm! (it's my first time messing around with mods so im sorry for any confusion)
In the future, do read mod pages! They indicate how to activate such things
Ok! tysm again
Hey i need help with the tricks and treats mod in smapi it said this: Tricks and Treats NPC Linus has an invalid Trick-or-Treat role listed: System.Collections.Generic.List`1[System.String] here is my smapi.io https://smapi.io/log/c40df00471f44b519d0e18e775a1a586
Log Info: SMAPI 3.18.6 with SDV 1.5.6 (build 22018) on Microsoft Windows 10 Home, with 86 C# mods and 83 content packs.
Hi! There's not much we can do to fix it - the mod author needs to do it. I suggest reporting it, along with your log, on the Nexus mod page.
ok thank you
is there a mod that lets me queue actions
like i click to water a parsnip and while that one is being watered i can click to water another and another and it will just water them
check out waterbot
thats the perfecct mod ty <3
Log Info: SMAPI 3.18.6 with SDV 1.5.6 (build 21362) on Microsoft Windows 10 Pro, with 108 C# mods and 409 content packs.
Suggested fixes: Pytk isn't compatible with newer SMAPI performance optimizations, consider removing it, One or more mods are out of date, consider updating them
i'm having issues getting my UI Info Suite mod to work! I did it through Nexus originally, mod manager download. It appeared in Stardrop but never came up. So I deleted, and downloaded it from the github, extracted into my mods folder and still it isn't showing up in game/mod menu.
!uiinfosuite
If you go to https://github.com/Annosz/UIInfoSuite2/releases, you can find UI Info Suite 2, which works with Stardew 1.5.5+. Download the first zip, not the source code.
Log Info: SMAPI 3.18.6 with SDV 1.5.6 (build 22018) on Microsoft Windows 11 Pro, with 101 C# mods and 160 content packs.
how do i install stardew exspanded
I have no idea what this text means, JojaOnline is just giving me a hard time
log is above
Multiple mods want to provide the 'Maps/Sewer' asset: Content Patcher (for the '(CP) Downtown Zuzu' content pack), Festival of the Mundane. An asset can't be loaded multiple times, so SMAPI will use the default asset instead. Uninstall one of the mods to fix this. (Message for modders: you should avoid AssetLoadPriority.Exclusive and {nameof(IAssetLoader)} if possible to avoid conflicts.)
this is also concerning..
Both "Downtown Zuzu" and "Festival of the Mundane" edit the sewer map so the conflict. If you want to try making them work together, you can go to DTZ's content.json and set it so it will not load its sewer map during Spirit's Eve.
As for JojaOnline, it seems that it's looking for item(s) that's not there anymore. Have you previously installed a mod that adds a custom shop or adds an item to Pierre's Shop and then removed it?
Hello. How do I fix this?
An item with the same key has already been added. Key: Cod at System.Collections.Generic.Dictionary`2.TryInsert(TKey key, TValue value
Aka. Where do I change the key?
I also got this error from Raffadax
Cannot load recipe: <InputId: spacechase0.JsonAssets:GetObjectId:Silver Leaf, Output: <Id: spacechase0.JsonAssets:GetObjectId:Silver Ore, Amount: 5>> as the input or output was invalid, this recipe will be skipped
Here is my SMAPI Log.
https://smapi.io/log/06b41756559a46a688d6ac0d711987a0
I've already fixed the other errors (except the bushbloom ones as I haven't tried that yet)
I'd really appreciate some help.
Log Info: SMAPI 3.18.6 with SDV 1.5.6 (build 1.3.37.0) on Unix 6.1.52.10, with 502 C# mods and 803 content packs.
Suggested fixes: One or more mods are out of date, consider updating them
ZIPPED MOD FILES
When I download mods off of CurseForge they automatically say they are "unzipping" into my mods folder, but upon running the game I get a whole lot of red. One line was;
"[Terrarium] Can't load Json Assets API for Terrarium".
When I look back through SMAPI I see a lot of
"Mod crashed on entry and might not work correctly.",
I'm not really sure what I did wrong in terms of installation/why the mods are showing up as red.
It's been a really long time since I've opened a coding textbook, so please simplify it as much as you can with the very little info I am able to provide.
Thanks in advance for any help.
don't use curseforge
(use nexusmods instead, but don't use nexus's vortex, use stardrop if you want a modloader)
*mod manager
Any ideas on mine?
is there mods that improve weathers and the game lights besides ferngill weathers and dynamic night time?
All games / Stardew Valley / Mods / Modding Tools / Stardrop
correct? via Nexus
Should be. Yeah.
Smapi doesn't detect my CJB cheats menu any idea on how to fix?
!log
Can you upload your SMAPI log to https://smapi.io/log (see instructions on that page) and share the link here? Even if your game doesn't show any errors, logs are useful, and often necessary, for troubleshooting.
Follow the instructions here, but if it isn't detecting it you probably didn't unzip the mod into the Mods folder.
That didn't properly link to your log, try copy pasting the link again
Its fine if I can't use the cheat menu I was just gonna use it to freeze time to just make the day last longer
gangalicious, i cannot get expanded to work
.
is it possible my game is bugged? i am level 6 farming but havent unlocked the quality sprinkler
im only using a few qol mods
very unlikely. i would guess you accidentally have a mod that changes the level rewards
i know you arent necessarily familar with every single mod, but these are the only mods i have, do any of those look like they could change something like that? or should i just remove one by one
those don't look like they could cause that
Hi, i have a problem where i could need some help. I wanted to edit a view words in Sebastians Dialouge (im using the Genderbend mod but the event dialouge still uses he/his/him and so on). I unpacked the xnb file to json via a tool and edited it. However when i try to save my edits i get a massage that it can only be propper saved in odt, and if i ignore that and save it in json i cant pack the json file back into xnb.
Can anyone help me here?
It sounds like you're wanting to make a mod
Making mods using XNB edits is fragile, difficult to make compatible, and generally not recommended
The preferred option is using Content Patcher
You can ask in #making-mods-general for tips on making edits using CP
i will try my luck there thx
Hi, I started stardew today and I got this. My drivers are all up to date and my GPU is working just fine (for other games). Any idea what I can do to fix this??
I use TimeSpeed for that
@neat plaza I’m going to try Option 1 that you gave me. Once I’ve completed all the steps, how do I get the mods to my switch from there?
why do my ellie’s seasonal paths look like that when placed down
Someone knows from what mod is this error?
we’re good I think I figured it out
nvm they’re worse now
Looks like Wilford Recipes
ill just install a different mod idgk
even when i installed a different pathing mod it looks like this 😭
OH omg I had two copies of the mod in my folder
also that kind of thin usually happens if you have ALternative Textures packs installed
if AT variants for an object are vailable it will pick a rnadom one when you place it down
hiii, today I found out my saved game wasn't appearing so I started searching on reddit and I tried deleting the new saves files and it worked but then this appeared and I can't solve it, is there anyone that knows how to solve it?
even when I only have one pathing mod left
!saves undo the last save
Use this guide to find your save files: https://stardewvalleywiki.com/Saves.
you can try with the texture tools
what are those
get a paint bucket from robin's and check to see if they at textures
if they are, you can use the bucket or brush to cange them to be the same
okkk let me try
@regal lodge You leveled up to Farmer. You're now a prettier shade of blue. Thanks for sticking around!
I can't give you a photo but if you go to buy to robin's store, theres some tools to change the texture of furniture and paths
did you uninstall any mods?
WOOO
like a bucket, a book, a paint brush and a spray can
I tried updating space core
!log
Can you upload your SMAPI log to https://smapi.io/log (see instructions on that page) and share the link here? Even if your game doesn't show any errors, logs are useful, and often necessary, for troubleshooting.
ok!
give me a min
Log Info: SMAPI 3.18.6 with SDV 1.5.6 (build 22018) on Microsoft Windows 10 Pro, with 40 C# mods and 99 content packs.
Suggested fixes: One or more mods are out of date, consider updating them
I use the book and the paint brush, the book lets u choose the texture and copies it in the paint brush which u can use to change the furniture
the spray can gives random textures
no way I thought it was all the same
being so fr this is annoying to me
I might delete alternative textures (it’s only there for one mod) and that mod too
my only suggestion is to try backdating spacecore and see if that fixes it?
i downloaded the happyhomedesigner mod, and anytime i try to change the texture from the furniture there it doesnt work, ill try spawning in a chair from cjb and use the paintbucket on it without the HHD mod and it still doesnt work, i can see the loaded textures, but when i try to change it nothing happens
but with beds it works fine..?
can you post a log?
yeah im logging off now ill post it
at uses separate patches for beds and all other furniture, so possibly one of the patches is failing
Log Info: SMAPI 3.18.6 with SDV 1.5.6 (build 22018) on Microsoft Windows 11 Home, with 88 C# mods and 134 content packs.
Suggested fixes: One or more mods are out of date, consider updating them
that's very weird. according to the log, all patches are applied correctly, and you're using the correct versions of DGA and AT
let me take another look at the code
does this still happen when you use the previous version of hhd?
Hey, new to the Stardew Valley fandom. I just got one question about SMAPI if anyone can help me it'd be much appreciated. Danke! 
what is it?
1.1.0 has some changes to the patches and I'm wondering if those changes are causing the bug
do u want me download the older version and see if it works
yes please
alright i will
Whenever I begin to boot SMAPI, it gives me a log saying that it couldn't load. I'm also very new and clueless with codes though I can handle files
these ones dont look too old, do u have a specific one i should try or just choose the one right before the latest
1.0.2
anyone know what’s wrong? i tried searching for the mod it’s asking for but no luck
The first one is an example mod
You don't need it or want it, most likely
The 2nd one wants Producer Framework Mod
nah same thing, im starting to think its either dga or at
If you post your log, it will show us more info.
!log
Can you upload your SMAPI log to https://smapi.io/log (see instructions on that page) and share the link here? Even if your game doesn't show any errors, logs are useful, and often necessary, for troubleshooting.
and with this older version i cant combine both catalogs
okay
thanks for testing it anyways. if you want later I can send you a debug copy to see about figuring out what the deal is
yeah, this sucks a ton, the HxW furniture works fine with it AT wise but i just dont seem to understand
idk what a debug copy is or will do but it cant hurt to read it
Log Info: SMAPI 3.18.6 with SDV 1.5.6 (build 22018) on Microsoft Windows 10 Pro, with 101 C# mods and 90 content packs.
Suggested fixes: One or more mods are out of date, consider updating them
Would i need that log to get the launcher started?
Could you double check your mods folder, and make sure that Producer Framework Mod is in there? That log shows it's not installed at all
yeah I checked its there, I can re-download it maybe itll fix it
Can you share a screen shot of your mods folder? I can't even see where it tries to load it
I just deleted the mod 💔
No worries, you can re-install it and try again. No harm done 🙂
I just re-installed it and I think it fixed it not sure what was wrong, no more red
That's all that really matters. As long as it works in the end
thank you for the help!
You're very welcome. Enjoy and have fun playing
I, got a question
Go ahead and ask 🙂 if someone knows the answer, they should answer
Awesome
So, whenever I boot up the SMAPI launcher. It tells me that it couldn't load. I do not know the reason for it either. Help would be very much appreciated
A google search brought me to a reddit post that suggested reinstalling the game. Something about the .net 5.0 file being corrupted.
https://www.reddit.com/r/StardewValley/comments/s944lo/stardew_valley_wont_launch_after_i_attempted_to/ Here's a link to the post I found. It's older but the poster said it worked.
I'll try it, un momento
No problem.
okay, i'll ask anyways, 'cause i REALLY don't want to lose the past two-ish hours of farm redesigning and decorating i've just done, but: is there any way to save my client when it's stuck with smapi not responding? no red errors, no nothing, it kinda just froze, but i can still hear the music playing just fine in the background..?
did you click on the SMAPI console? The game will lock up if you accidentally highlight text on the SMAPI window
If so, just press return/enter with the console in focus and it should unfreeze the game, otherwise it's hard to know if there's no log
nope, the console is just fine, i pressed enter a few times and nothing really happened ... i don't suppose i get the log until i close the game, right?

my DECORATING-
your log updates even while the game is open
would anyone happen to have the code for the tea sapling crafting recipe OR a game with tea sapling recipe received from caroline?
i saw her 2 hearts event and got the mail but it was botched and only this one email did not open properly for god knows what reason. i got food recipes from willy and lewis in mail alright and they show up, but this one, no, doesn't.
in my save file the "CarolineTea" mail is already in "received mail" not "tomorrow mail" and when i move it to tomorrow mail to trigger that mail again it botches again and still no recipe.
crafting recipe code is like this: <item><key><string>Chest</string></key><value><int>7</int></value></item>
i just don't know what's the int value for "Tea Sapling" so that i can add it to my save file manually >.>
... i just remembered i had 3 older saves in my backup hdd.
the code is <item><key><string>Tea Sapling</string></key><value><int>0</int></value></item>
For future notice the int value is the number of times you've made the recipe
So set to zero is fine
ahhhhh -0-
gracias, i didn't know this, i thought it was an id
thanks goodness CA codes in java, at least the code is easy to read and even amend if things go south.
thanks for the tip ^-^ the more you know. works now ^^
he doesn't
I don't know how you think sdv is java
(didn't mean to be as rude as this sounds, not sure how to word this better, sorry!)
it's c#
Type debug sleep into console
Doesn't always work but that will try to force a save
I learn something awesome here every day, ty
Anyone know how to fix this portrait bug? I’m using dcburger’s mod btw, it looks like this for every character
!log
Can you upload your SMAPI log to https://smapi.io/log (see instructions on that page) and share the link here? Even if your game doesn't show any errors, logs are useful, and often necessary, for troubleshooting.
Is it android btw?
No playing on pc
Ok do the 🪵
Alr !
(P sure that portrait mod requires either HDP or Portraiture btw so check if u've got the proper dependencies)
i had portrauture installed already and it looked the same, ill try HDP
If it's DCBurger's then it's not using HDPortraits.
And this usually happens because PyTK is not correctly installed.
Please forgive me, I’m still not understanding. Do you mean install Ubuntu first, and then slide in my SD card and add files to the SD card?
put the switch in the dock, plug in a usb key with mods you downloaded previously, or just log into nexus on whatever browser ubuntu comes with (or download your preferred one, assuming it supports ARM) and download off there
Ok thank you! I downloaded ubuntu but I can’t find Linux 1.5.4. Also I downloaded depotdownloader and extracted the files from the zip.
i think he’s referring to stardew 1.5.4?
depot 413153, manifest 8217744766731334212 (from steamdb)
I’m sorry, I don’t understand. I went to steamdb and couldn’t find depot or manifest
it's fine, I sent the ids there
What do you mean by sent?
discord messages
.
I used this guide to help run it btw https://web.archive.org/web/20200115233340/https://ur.gs/post/stardew-valley/
hi can someone please help me out
I am trying to download stardew valley expanded but it has not come up properly for me
this is what it says
its telling you what is missing, you need to go back and download all the requirements from nexus
go to sve’s page, scroll down a bit, and click the requirements drop down
oh ok thanks
does anyone know if you can make things with Golden Crops?
also is more coal broken? the and extras one specifically?
hi :3 so this replacement for the singing stone is shown in the screenshots for Industrial Furniture Set, but it keeps showing up as the default green singing stone? I can't figure out if it's actually included in the mod and i've just installed it wrong, or if it's not from the mod and was just included in the screenshot by accident or something <3 any help would be appreciated
https://smapi.io/log/0eeabd7107c443b5b389149659863ffb
Log Info: SMAPI 3.18.6 with SDV 1.5.6 (build 22018) on Microsoft Windows 10 Home, with 30 C# mods and 49 content packs.
Suggested fixes: One or more mods are out of date, consider updating them
sorry i meant to send it earlier but something got in the way, is it ok if i still send it?
just run it
how do I do that? It's my first time playing modded stardew
probably just double click
okay
it says "Choose an app to open the .sh file" options are notepad, windows media player legacy and word pad... What do I choose?
why are you running install on linux on windows??
so do I do windows then?
yeah?
Yes, this is an open chat for troubleshooting 🙂
Hi im having issues with the NPC Amon mod
https://smapi.io/log/438530113789462a88ed714f0e756038
His dialog goes blank for some reason and idk why.
Log Info: SMAPI 3.18.6 with SDV 1.5.6 (build 22018) on Microsoft Windows 11 Home, with 42 C# mods and 34 content packs.
Suggested fixes: One or more mods are out of date, consider updating them
Could not load content pack '(CP) Amon - English': content pack has no content.json file.
Continue attion, Not able to change his pic too even though it states he has two.
yep
That's what your issue is.
You didn't overwrite the dialogue files by replacing them
how am i supposed to do that though
You drag the dialogue out of the English one and replace the original dialogue file
it will not let me
made me skip 6 of them
Reinstall both again, and make sure the game is completely off.
it is and alrighty
This also might be relevant as there are two different versions of the English translation based on what you chose
thats the thing, i have it installed properly, he shows up and everything but doesnt talk at all.
and the error is still popping up
im doing word for word what they say but it refuses to work
You might have to adjust your own permissions for your files if it is still reporting an error, or report the bug on the English patch if it allowed you to patch it.
Unless you're using Vortex still. In which case Vortex doesn't like you replacing files.
i use vortex cause my pc refuses to instal smapi on its own.
but most of my downloads are manual anyways
how do i adjust the permissions?
Smapi is already installed???
If Smapi is in Vortex files, just run it again.
Also manual doesn't change anything with Vortex
i see
@iron lantern You leveled up to Cowpoke. You can now speak in our voice channels and share images in all channels!
even when I cheat my farming level to 10, the only sprinklers available to make are basic
but the others still show up in the spawner
going to uninstall this mod, it still refuses to work.
can someone help me?
!howtoask
When asking for help with modding issues, please:
- Ask in #archived-modded-support
- Try to explain what the issue or problem is. Please be specific!
- If it's SMAPI installation related, please state whether you're using Windows/Mac/Linux and Steam/GOG/Gamepass.
- Provide a log if you have one (see https://smapi.io/log for instructions). Please provide a log even if there's no errors or warnings! If you are playing multiplayer, we will need a log from every player.
- Please remember no one's getting paid to answer your questions! It may take some time for someone to answer! If no one has answered in a few hours, feel free to ask again
how much more specific could I be exactly? also I've been having issues all day and not a single person has responded to me despite responding to other so yeah
*others
also this IS the modded game support channel
also also its not busy, nor is it completely dead, so it's not like it's getting lost
not to mention just pinging "howtoask" is a rude as responding just with LMGTFY isn't it? I though people got over that
*as rude
not to mention I was trying to find out if it was a known issue that someone could just explain
This is a spacecore error not a pytk error, and might not even be an error, but a warning.
spacecore patched stuff in pytk for the serializers to work, since the newer versions of pytk are empty shells, what it tries to patch does not exist. should have no impact on anything though. From the message I can't tell which version of pytk is installed, but I would guess it's one of the empty ones.
I have an idea what the problem might be, but I'll have to look into that. If it can be fixed from my end I'll try, but it'll probably be for the SDV 1.6 version.
i am sorry to hear that you have been having problems, but please understand that people do this on a volunteer basis and wont always know how to help, therefore the lack of responses. im not sure what is causing your issues but i believe there are debug commands you can use to manually add in your missing recipes, let me get it for you
‘debug craftingrecipe Quality Sprinker’ and ‘debug craftingrecipe Iridium Sprinkler’ should do it. type each of those (separately) into the black smapi window and press enter
hello i have a question, ui info suite says its outdated and it doesnt work. is there an alternative or something i can use?
!uiinfosuite
If you go to https://github.com/Annosz/UIInfoSuite2/releases, you can find UI Info Suite 2, which works with Stardew 1.5.5+. Download the first zip, not the source code.
thanks alot
Thanks so much for getting back to me! I’m curious what the fix might be too. I will admit I’m gonna hold off on updating to the latest stardew for a long time as it’ll break all my mods (most of which will never be updated again they’re so old 😅)
All mods work on phone or nah
!androidmods
An incomplete list of android compatible mods can be found at https://android.stardew.rocks/. If you find a mod that isn't on there, submit it by following the instructions here.
For mods not listed here, they may or may not be compatible with android, but see https://stardewvalleywiki.com/Modding:Android for more info, including how to find a compatible version of a mod not listed in the first link.
What does alternative version working mean
I got 1.5 will it work or no
So it will work yes or no
yes thats what working means
hii, may someone help me? when I try to enter into my farm the game keeps getting me to the title page every time
this is the text I get in the smapi loader
looks like your save file might be screwed
and what do i do?
My game keeps crashing when I try playing multiplayer. Why? (it constantly repeats these two things)
!log first, from a quick look I can see two issues: wind effects mod (do you have a wind mod installed?) and have you done .Xnb modding? Because a lot of the errors are coming from the game files rather than the mod folder.
Can you upload your SMAPI log to https://smapi.io/log (see instructions on that page) and share the link here? Even if your game doesn't show any errors, logs are useful, and often necessary, for troubleshooting.
!xnb
XNB mods often break the game and are not recommended. See https://stardewvalleywiki.com/Modding:Using_XNB_mods for more info (and a list of Content Patcher alternatives), and https://stardewvalleywiki.com/Modding:Player_Guide/Troubleshooting#Reset_your_content_files to fix problems caused by XNB mods. For mod creators, see https://stardewvalleywiki.com/Modding:Editing_XNB_files for help unpacking & editing them (including for use with Content Patcher).
pleaseee 
Sadly I can't help much about a save file issue :(
But it may be possible to go back to an earlier part of the save, smapi periodically creates backups of your save file called save backups in the stardew file
!saves undo the last save
Use this guide to find your save files: https://stardewvalleywiki.com/Saves.
thank youuu
did u ever get the debug thing
i checked with stardew checkup to see how perfection is going in detail and my crafting tracker says i know 119 vanilla recipes and 10 mod recipes, but i counted and only found 128 recipes in my crafting menu. is there any way to fix this?
I have a problem, again, I don’t understand what’s wrong, why I can’t enter the club, I have the “all bundels” mod installed, what should I do?
Hi is there a new setting on the nexus website I may have missed? I've been scrolling for months now but suddenly I see all these new mods but turns out none are published? Is this normal or has nexus glitched?
Probably a Nexus glitch
yeah, hidden,deleted and un-published mods seem to be showing up in the search right now
Okay good I'm not alone. Lol I've seen deleted before but not just straight up unpublished. I was so excited for new npcs only to be bamboozled. Thank yall!
So who will help? Why is everyone ignoring this problem twice already?
!log
Can you upload your SMAPI log to https://smapi.io/log (see instructions on that page) and share the link here? Even if your game doesn't show any errors, logs are useful, and often necessary, for troubleshooting.
Hello ! If someone could help me with the "Flower Meads" mod ? I would like to instal the BAGI Korea blossom but it says on SMAPI that the mod is not installed
do you have all 5 of them? Flower Meads, BAGI, BAGI mead addon, Korea Blossom, BAGI for Korea Blossom?
Yes i have all 4 ! I have read on Nexus that this mod should be modified
I have Raffadax too
All bundles is broken and your save file is now screwed
Remove it and start a new save
This is fucked up, I've gone too far, is there a solution to the problem?
there should be 5, sorry, you need both BAGI and BAGI Meads addon, do oyu have both of those?
Also in the future, please don't complain people are skipping over your issue because people don't know the answer to every issue
We're volunteers here
Isn't this channel created to help with errors?
Nope. You may be able to fix it by force completing the community center with CJB But I think it still bugs then
It is
But that doesn't mean everyone knows the answer to every problem
Anywho. Bundles are baked into the save itself
So the bug is baked in to your save itself. Which is why you have to toss it If force completing the center doesn't work
Can't fix the error in the save file?
Good luck finding someone who can help you edit your save For the specific issue
Most of us here do not do save editing because that is really really really really bad
Oh i don't used the BAGI Meads Addon, i will try ! Thx a lot
In theory yes, But in practice you are probably going to not find anybody who can help you save edit to try and get rid of the all bundles error Since most people discover it by entering the community center before they get too far into the save.
This is the answer I expected
When I bought the official version, this garbage was fixed, but appeared again
Yeah, this specific error wouldn't be because of a pirate game. But i'm not surprised you didn't get help with the pirate version, Assuming that's what you mean by Buying the official version
No, I thought the problem was that it was not the official version, I bought the game and reinstalled everything, and everything was fixed, but it appeared again
I mean I think we're saying the same thing then
Either way all bundles is definitely the problem
Once it is gone and you are on a new save it will disappear
But you can't start a new save until it is gone
Otherwise the bug will be baked into it
on a previous occasion, dr elizabeth gave you this link to a console command: https://stardewvalleywiki.com/Modding:Console_commands#resetjunimonotes
that resets your bundle progress and may un-break your save. have you tried it?
It usually doesn't based on prior troubleshooting in here. But hey, go ahead and try it.
(it also may not un-break your save. but you don't have a lot to lose)
If it does then maybe we can make a new command
It would be so much nicer than the 20 messages I've had to send on it 
It works i think, i d'ont have the same SMAPI message anymore ! Thx a lot !
no
Im do try
hi i haven’t played stardew valley since june of last year, have there been any big patches that might break my mods? or am i good to keep playing with my mods
hi everyone, i'm trying to play multiplayer with my friend but it keeps crashing on her end. how can we fix it? we both have the same exact mods, same version and everything. how can i share her error log too? (it happens when she opens her inventory)
i'm p sure you're all set
you should update SMAPI and any mods that need updating but no, no game updates have come out in that time. there is 1.6 coming up very soon though which will change lots of things
!log
Can you upload your SMAPI log to https://smapi.io/log (see instructions on that page) and share the link here? Even if your game doesn't show any errors, logs are useful, and often necessary, for troubleshooting.
get a log for yourself and your friend
That's a very broad question as there hasn't been any updates that major 🤔 but it is recommended to always keep your mods up to date for new features, optimizations and bug fixes.
ok will do now
Oh...Vin already-(curse you mobile.)
has smapi been updated since? if i launch the game won’t smapi tell me what needs updating?
yes to both questions
do i send it on here?
is there a way to see that pop up from smapi about my mods again? it went so quickly
once the game stops loading you can scroll up
how?
Log Info: SMAPI 3.18.6 with SDV 1.5.6 (build 1.3.37.0) on macOS Unix 13.3.1, with 8 C# mods and 0 content packs.
Log Info: SMAPI 3.18.6 with SDV 1.5.6 (build 1.3.37.0) on macOS Unix 14.1.1, with 8 C# mods and 0 content packs.
uh, click the console and scroll?
console?
the black window with all the text
i have no idea what you mean 😭
the window that tells you what needs to be updated
it pops up every time you play modded stardew
oh dear lord. does your friend's game open if they take out all the mods from the mod folder?
ohh mine is white
the game opens fine, it just crashes when she opens her inventory
do i ask her to give it a shot and send that log as well?
could it be CJB cheats menu somehow?
wait no thats not inventory that has its own key
ok so i opened the game again but the smapi thing disappeared really quick
how do i see it again
yeah exactly
but could she try single player and what happens when she opens her inventory with no mods on?
if you hover over the game on the task bar on the bottom of your screen, you should get the option to click on the console
actually looking at the log again it does seem to me a multiplayer issue specifically
im seeing from the log that its a game issue, but i could be 100% wrong since its my first time seeing a log thingy
oh i’m not playing on pc, i play on a steamdeck so i don’t have that
is there no way to access that through the smapi folder in my files?
try taking out crops anytime anywhere for both of you and see if it crashes for her then?
Can you upload your SMAPI log to https://smapi.io/log (see instructions on that page) and share the link here? Even if your game doesn't show any errors, logs are useful, and often necessary, for troubleshooting.
ok i’ll try that
it crashed without it as well before we put it in. we are trying the single player thing
remember not to take out error handler from the mods folder
ok
ok, it didn't crash on single player. here's the log: https://smapi.io/log/aaf873d9390f47ef839dc2ab3d2a63c0
Log Info: SMAPI 3.18.6 with SDV 1.5.6 (build 1.3.37.0) on macOS Unix 14.1.1, with 3 C# mods and 0 content packs.
what if you both go multiplayer now with no mods? will it still crash for her?
hey! Can I get you to run through this troubleshooting guide https://stardewvalleywiki.com/Modding:Player_Guide/Troubleshooting#Game_doesn.27t_launch? If none of the options there work, can you post the error message you get if you open SMAPI using the command line?
the issue isn't the game launching, it crashes on inventory
if that doesn't get fixed, game won't be playable
.... I repeat, the game won't be playable
The reason why it's crashing is because it's trying to access a screenshot path that "already exists"
so the pause screen - which includes the options menu, which includes the screenshot button and screenshot folder button - ends up dying
...ok
will try this now.
(In case she's going through the whole thing - please scroll down and see the section on that exact error, specifically "Mac: Contents/MacOS/StardewValley Already Exists")
I've been busy but I'll set it up when I have time
we did that. it still crashes on inventory
here's the log
Log Info: SMAPI 3.18.6 with SDV 1.5.6 (build 1.3.37.0) on macOS Unix 14.1.1, with 9 C# mods and 0 content packs.
Hmmmm
so, if I'm reading this log right, they logged on, walked out of their house, put a heart emote, then attempted to access the inventory causing the game to crash?
yes exactly
And this doesn't happen in singleplayer, you said?
yes, exactly
Hm. You should both verify files in case either of you had XNB mods now or in the past, but after that... honestly I'd be asking Logo or Elizabeth how to run the mac equivalent of Event Viewer
!reset
See https://stardewvalleywiki.com/Modding:Player_Guide/Troubleshooting#Reset_your_content_files for instructions on resetting your game files! (This doesn't affect your save files.) You may also want to check this list of XNB > Content Patcher conversions (https://stardewvalleywiki.com/Modding:Using_XNB_mods#Alternatives_using_Content_Patcher) to see if there are already replacements for any XNB mods you may have been using :)
she just downloaded the game today, and mine 2 weeks ago, would i still need to do this?
I would do it regardless of install date.
Oh
And since they're on Mac
After they do that they'll have to reinstall SMAPI
Because verification on macs makes it use the regular exe for whatever reason
Doesn't take long to reinstall SMAPI though
alright, will do that
like two button clicks and voila
This is really weird.
Solid foundations is failing to load the cached custom buildings apparently and so isn't loading any custom buildings at all.
!log
Can you upload your SMAPI log to https://smapi.io/log (see instructions on that page) and share the link here? Even if your game doesn't show any errors, logs are useful, and often necessary, for troubleshooting.
OK one sec. I'm just gonna see if it happens again
Is anyone good w steam deck? Because I was able to have smapi and stardew run perfectly fine but then smapi just stopped loading for no reason
I've tried deleting smapi and stardew or just running it w smapi and no mods but it just won't run at all
Hey I play on Steamdeck too
SMAPI did briefly stop working for me but after I ran the installation through konsole and reinstalled it again it began to work again
But yeah. I can definitely try running through a few things with you as I play on Steamdeck as well
It's on my hd I didn't get an sd yet lol
Mine is
Home/Deck/.steam/.steam/steamapps/common/Stardew Valley/Mods
Yeah it's the same for me
I leave my sd to all of my Emulators and roms lol
OK cool
I've been wanting to emulate but it's sm work 😭
That would be helpful ty
I tried running through the konsole like the wiki said
And it gave me a fatal error thing
That I need libhostfxr.so in my library?
OK that didn't happen with me. Weird.
Let me link the one I used
OK so first.
sudo pacman -S openssl-1.1
Have you ran this through Konsole yet?
One second
You might need to set a Sudo password if you haven't already
It said that it failed the transaction and it couldn't lock the database
Hmm. Take a picture of your Konsole window so I can see what's happening
Oooh. OK.
One sec
You need to enter
sudo steamos-readonly disable
Then try installing again
Using the command I gave you
OK. Let me find the command you need, but essentially. You need to set up Pac Man
Pac Man is what Arch Linux uses to install pak files
Then you can install openssl which is needed for SMAPI
Alright
So. First of all. You need to use
sudo pacman-key --init
Then
sudo pacman-key --populate archlinux
Then finally
sudo pacman -Syu
Let me know when you've done that
It said that it's corrupt and it's asking to delete it
Hmm. It is what I used, so it should be OK.
If you like you can type "y" but if you feel it'll be OK type type "n" and see if it works
Alright I'll use it
Now it asked for the same thing but a different one lmao
Do I just keep doing n for each one?
Hmm. Yeah. I honestly don't understand why it is giving you an error for pac man
Oooooh. OK. I just realised
If you look in your konsole
You're still in the SMAPI installer
That's why it isn't working
Ohh
If you close down Konsole
And then reopen it without the installer
It should be the main drive
Do I have to redo all that
Yeah, sadly but hopefully it should work as long as you're in the main drive
Alright
I'll show you what it should look like
(Trust me, it took forever to understand the Steamdeck too)
Lol
I barely got the hang of this and I got a few months ago 😭😭
Lol. I've had mine for about 2 years now
So I've had a lot of practice
As you can see
It should say deck@steamdeck
Thank you
Did that work?
Now it's just lagging badly so I gotta wait a minute 
Yeah. It just has to install everything
Once done, restart the Steam deck
After that you can continue to install openssl
I think I have to restart now cause it's frozen 💀
The Steamdeck does that sometimes
Hopefully you'll be all good and set to download openssl
But hey. At least you made Progress
The best way to restart is to hold the power button until the light turns white
That's a complete restart
Once you do that, leave it for a few seconds and turn it back on
Thank you for being so patient w me
No problem. Steamdecks are quite complicated
I spent many many hours googling on how to do certain things and what commands I needed lol
Okay it did the same thing now
I am a terrible Googler
(If it helps, typing the name of a command and --help usually gives you some guide to a command)
(Often it tells you what you need to be doing too)
The same thing?
Asking to delete the packages
Lol yeah. That's when I realised you hadn't gotten Pacman
Xd
But i got the same thing as this do I do n again?
For open ssl?
Or for Pac Man?
Pacman
Ah. Hmm. Are you running on deck@steamdeck?
Yeah
Hmm. OK. One sec. Let me see if I can figure out what's going wrong for you
Thank you😭
OK so from what I can tell by doing some googling, you need to delete that corrupted file.
So if you look
It is in the /var category
Just follow the directory it gives you
My game keeps crashing when I open a save file and this is what it keeps spamming https://smapi.io/log/a9e023b60ad04f3ea71bc65f09297789, I'm kind of confuse
Log Info: SMAPI 3.18.6 with SDV 1.5.6 (build 22018) on Microsoft Windows 11 Home, with 69 C# mods and 78 content packs.
Suggested fixes: One or more mods are out of date, consider updating them
!saves
Use this guide to find your save files: https://stardewvalleywiki.com/Saves.
Do I send the save file here?
I tried removing it from my mod file just now and it's still crashing :/
No that's an instruction for in case your saves are damaged
It looks like you recently uninstalled a mod that the game might have been trying to render
!log
Can you upload your SMAPI log to https://smapi.io/log (see instructions on that page) and share the link here? Even if your game doesn't show any errors, logs are useful, and often necessary, for troubleshooting.
send the new log
Log Info: SMAPI 3.18.6 with SDV 1.5.6 (build 22018) on Microsoft Windows 11 Home, with 68 C# mods and 75 content packs.
Suggested fixes: One or more mods are out of date, consider updating them
Okay
stardew checkup claims there's one of each modded cooking and crafting recipe that i know but haven't made yet, but i can't find them anywhere in-game. my collection tab for cooking only has the 80 vanilla items and the crafting tab only has 128 items (119 vanilla items i've learnt so far and 9 modded which i've crafted all of)
log: https://smapi.io/log/1ff60dc382044f26b8a6c0fb750d9479
Log Info: SMAPI 3.18.6 with SDV 1.5.6 (build 22018) on Microsoft Windows 10 Pro, with 68 C# mods and 95 content packs.
i'm mainly worried about this potentially making it impossible for me to achieve perfection in this save as it is already in spring y2
crafting``` I believe is the command to force unlock all recipes?
Okay, it looks like a catastrophic error occuring with a prior mod being uninstalled
and also content patcher animations acting up again
i recently got the dynamic lighting mod and in game i went to sleep early and now everytime i play on that one savefile it makes the lighting in the game this really ugly orange and in night time no matter the time of day 😭 i deleted the actual mod from the file but its still stuck
i also have ambient light mod so im not sure if it could be getting it stuck
Is there no way to fix that or do I have to start a new one? I just cleared my trash bin too 😭
my problem is less so having recipes that aren't unlocked but having recipes that supposedly are unlocked but i can't find them anywhere
If you input this command, it should force the game to re-register unlocks and actually display them in your crafting menu. As for the mod cooking recipes, that's really weird. Let me look further into that to see if I can find the anomaly. Also, you haven't disabled any mods, have you? That's another thing that it might be trying to parse.
You mean dynamic night time?
mhm
i don't think i removed any mods since starting this save, but there is a possibility that something updated and removed a crafting recipe. no idea about the cooking one though
Wait, hold on.
Let me investigate Tidy Crafting since it's an older mod that hasn't been updated in a while.
!log
Can you upload your SMAPI log to https://smapi.io/log (see instructions on that page) and share the link here? Even if your game doesn't show any errors, logs are useful, and often necessary, for troubleshooting.
Alright first, verify file integrity. Second, delete Content Patcher Animations.
Custom Ore Nodes seems to not be working for me
!log
Can you upload your SMAPI log to https://smapi.io/log (see instructions on that page) and share the link here? Even if your game doesn't show any errors, logs are useful, and often necessary, for troubleshooting.
If you're unable to find those rogue recipes, perfection tweaker is great for lowering the criteria needed to reach perfection.
https://www.nexusmods.com/stardewvalley/mods/8615?tab=description
ive trie the basic re-opening the game or testing with other files but it seems to be just THAT file
its like an eye-straining orange too 💔
I just tried something, I’ve gotta wait for it to reload before I can post the most recent log
While I’m waiting… I don’t have to manually set all the drop rates do I?
Okay, well, it might be Tidy Crafting acting wonky with SVE according to the mod page, but SVE should be loading afterwards.
https://smapi.io/log/0b2e7e8fb3c2467c83d65bb3b9368e06 still crashing
Log Info: SMAPI 3.18.6 with SDV 1.5.6 (build 22018) on Microsoft Windows 11 Home, with 67 C# mods and 75 content packs.
Suggested fixes: One or more mods are out of date, consider updating them
Well, temporarily disable Dynamic Game Assets I suppose. It might be a catastrophic save error.
I've never used it. Custom ore nodes is a framework, so it doesn't do anything by itself
Also does anyone know what the latest update for BFAV is?
Alternatively, you CAN manually edit it to have an effect. But otherwise only mods utilizing it will see any effect.
The unofficial one, which I believe has a broken update key so it will always say it needs to be updated
So I just looked at it and ambient light and dynamic night times are incompatible
That said: Try Enabling Real Time light on that save.
Users can tailor Ambient Light to their liking when the game first boots up a config.json will be generated automatically in the mod folder with the following settings:
EnableRealTime: Set to true to have Ambient Light fetch the latest condition from the back end, this allows the mod to set the type of Light in game. Set to false to not have Ambient fetch any data and therefore, use the standard Overcast light type. This setting is set to true by default.
LightConfig: 1=Cloudy, 2=Mist, 3=Fog, 4=Rain, 5=Snow (Currently only 1-3 are functional at this time)
Note: EnableRealTime must be set to False in order for LightConfig to take affect.
I fixed my problem with Custom Ore Nodes I think
so i can either remove both or just make ambient the default?
tried using debug commands; i got 139 crafting recipes but that was including the wedding ring which was added by the debug, which i don't think should count because i'm in a single player save. still 80 cooking recipes. missing supposedly learnt cooking and crafting recipes are nowhere to be found
See, this is why I wanted your log. I thought you deleted the other one. You have to disable Dynamic Night times entirely to keep ambient light working
#archived-modded-support message for you MOONY To see if it helps at all
Sorry
A bit scattered with all these issues
if i get that will i still get the steam achievments? cause i'm planning with playing with expanded next and i'm certain that'll take a while
But I looked into Tidy Crafting and it is probably the reason you don't see recipes. It doesn't play well with SVE
Also I have another problem! I can’t build any sprinklers other than basic even when I cheat my farming level up to 10! Would I still need a smapi log to help with that?
no worries i can wait a lil till the chat clears up
Also do I have to cheat my level up again before I get the log?
uhh, no. I believe Vin actually sent you the recipes
Here you go!
If you follow the instructions and type that into Smapi, it should add the missing sprinkler recipes
debug craftingrecipe Quality Sprinkler debug craftingrecipe Iridium Sprinkler with that exact spacing in your Smapi console should fix the missing sprinklers issue
Your issue is simple, just turn one or the other off. They're incompatible, hence the weird visual glitch.
made another save just to test stuff out. >:(
why is it always the save i want to get perfection on that gets the annoying stuff?
(mod recipe listed here is a friendship bracelet made with the mermaid pendant)
https://www.nexusmods.com/stardewvalley/mods/11115
This might be better to use on top of https://www.nexusmods.com/stardewvalley/mods/8615
A new crafting UI with support for customizable categories and favorites. Easy bulk crafting. Better Workbench functionality. And, optionally, constructing buildings right from the crafting menu using
Thank you so much @languid trout and @modern python
The reason I say this is how Tidy Crafting states on the mod page it may very well be incompatible with anything that modifies vanilla crafting recipes.
Glad it worked for you!
I’m sorry I got a bit shirty yesterday I just felt like I was being ignored XD
You weren't, you had just missed me by like twenty minutes. We don't have set schedules for when we pop in or volunteer. I do it whenever I have free time and need to work on my mods.
the secret is just not using BFAV
all versions of it barely work and its getting replaced by Content Patcher in 1.6
For the record, the latest update is the one you most likely downloaded on the forums.
I think it just has a broken update key so it just shouts into the SMAPI log that there's a problem (The problem is BFAV is a terrible framework, but I digress.)
Ah right, so eventually when Content Patcher 1.6 comes out, the mods that require BFAV will work just with that?
unfortunately not, but there is a converter for it
Oh ok
https://github.com/AnotherPillow/BFAV2CP heres the link
But for now just dw about it?
yah
Yeah, don't worry about converting until 1.6
Thanks. Also is Adopt N Skin what I should be using to randomise animal skins or is there a better option?
i would personally recommend Alternative Textures but thats because i dont have personal experience with AnS
tbh, Alternative Textures is probably the best option if you only case about texture variety
Beat me to it
Adopt n' skin textures aren't really maintained or something people actively make anymore. So AT all the way.
Thank you
What do these errors mean?
its super easy to make ur own tho
you need to install some missing required mods. particularly Farm Type Manager and Buy More Materials
I honestly don't even know if Adopt n' skin is surviving the transition to be transparent.
it means those two mods could not be added to your game because they require mods which aren't installed
buy more materials is the mod giving the error
its essentially asking me to install itself
🥲
no, its a patch for Buy More Materials, if im reading it correctly
tbh i dont know what that mod is, theres also a chance you didnt install it correctly and are missing a component
oh i must have missed it wait. im still new to nexus
https://www.nexusmods.com/stardewvalley/mods/8186 it is this mod
there's another person in the comments with the same problem from last month
Does anyone know which mod this is from, and how to get it? I've tried two different four-leaf clover items now on the Enchanter Bundle.
if its in the enchantment bundle it might just be directly replacing the rabbits foot? ie, you still need to use a rabbit to get it
If I recall correctly there's at least two separate mods that use four leaf clovers to replace the rabbit's foot item.
could probably be disabled in a config if you wanted to
Huh. Let me check that.
Yep. I have a mod that replaces Rabbit's Feet with Four-Leaf Clovers.
!xnb
XNB mods often break the game and are not recommended. See https://stardewvalleywiki.com/Modding:Using_XNB_mods for more info (and a list of Content Patcher alternatives), and https://stardewvalleywiki.com/Modding:Player_Guide/Troubleshooting#Reset_your_content_files to fix problems caused by XNB mods. For mod creators, see https://stardewvalleywiki.com/Modding:Editing_XNB_files for help unpacking & editing them (including for use with Content Patcher).
oh nvm there's a cp version
I'm having some issues with smapi. This has happened to me before and I still don't know the cause. It just fixed itself before or was fixed when I reinstalled smapi, but this time that's not working. When trying to open the game I get a black screen. If I click it, it goes white and I get this pop-up. I have'nt changed anything with smapi or my mods. The game loaded fine the last time I played. Does anyone know how to fix this?
Looks like you probably need to wait longer without disturbing it
Unless you really only have a tiny handful of mods
!smapislow may help if you don't have intensive mods installed (which I can't tell from a screenshot)
For some players, SMAPI can take a while to launch the game. See this section of the troubleshooting guide for some common causes and possible fixes: https://stardewvalleywiki.com/Modding:Player_Guide/Troubleshooting#Game_lags_or_stutters_in-game
hello can someone tell me with what type of file I need to place the mods in the mod file?
I don't understand the question, maybe you can rephrase or give an example?
When I load smapi with steam, it doesn't load the mods i've placed on the mod file so I though it was because I was placing the mods with a different file type
!log
Can you upload your SMAPI log to https://smapi.io/log (see instructions on that page) and share the link here? Even if your game doesn't show any errors, logs are useful, and often necessary, for troubleshooting.
do you have a log?
no
yeah on windows
did you set your launch options?
I took out my mods and waited 5 minutes (it usually loads in less than a minute with mods) and i still had the same problem
not @-ing you but thank you for this advice! helped bigly!
feel bad for pinging for something a few days old ;-;
Oh yey!
I have a problem, when I try to play in co-op with mods this message appears, I'm playing in Xbox Gamepass, pls help me 😦
Are your mods loading in properly? Or does this happen only when you try to play mp?
only when I try to play in mp, my mods works well
!mphelp
For connection issues in multiplayer see:
- This pinned post
- The wiki troubleshooting page
- CA's multiplayer guide
Ive tried it, I keep trying, but I dont see any results
I'm building a PC and I remember seeing people say some things about how some graphics cards or CPUs don't work with modded Stardew, can anyone elaborate a little more on that ?? I'm building a PC and plan on having a dedicated video card but just wanted to double check ^^'
Might have been integrated vs dedicated graphics but searching either doesn't seem to show anything helpful
You need the downloaded mod folders. take them out of the zips and put them in the folder named Mods in the Stardew Valley folder.
extract the zip?
Yeah
If there isn't a folder named Mods in the Stardew Valley folder then SMAPI hasn't ran yet
Yeah I have the mod folder but I only drag the ZIP folders in there
Yah you gotta take the things out.
theres no way of knowing if your computer will work with smapi before you get it ⁉️
Alright thanks a lot
the SMAPI console does tell you this if it detects zip files in the Mods folder (in red text)
!monobug
Implemented in version 1.5.5, MonoGame is the latest framework that Stardew uses, and was implemented to solve problems such as Memory limits and audio issues. Unfortunately, MonoGame has a bug which affects random computers, not allowing them to launch Stardew. This bugs randomly targets computers, regardless of your operating system or hardware and is out of ConcernedApe's control. There is currently no known fix. See !legacy or !legacymodding for how to get your game to work.
Its rare but not so rare we dont have a command for it
It doesn't tell to me it just runs the game
There's no console opening alongside the game?
Yeah there is it tells me loaded 3 mods that are smapi mods
It appears like a black screen telling me all of that info
Yeah that's the SMAPI console
but there is no red text
weird!
yea
sounds like you're putting the mods somewhere else than it expects
the console tells you where to put the mods
Yeah I open Windows + R and paste that link the console tells me, there is where I put the mods
can you screenshot that folder?
weird that it's lowercase
I'll try to extract the files
can you screenshot what's inside?
Cause the mods are full in ZIP
Any way to uninstall always raining in the valley from my modded playthrough I'm already 2 years in.
Apparently it prevents perfection because stuff is unobtainable for some reason. And I can't find a mod to tweak the perfection requirements unfortunately.
my savior
Hi, can anyone help me find what causing this error please: https://smapi.io/log/aa9a2f11a03a4899b174343b089f90db
Log Info: SMAPI 3.18.6 with SDV 1.5.6 (build 21362) on Microsoft Windows 10 Home Single Language, with 36 C# mods and 17 content packs.
I tried to install smapi but it shows this instead of actually downloading. How can I fix this? When I press any keys like it said it disappears.
I'm starting to mod Stardew with curseforge but i can't find SMAPI on curseforge, do i have to find it there or install it from somewhere else?
!smapi
SMAPI (https://smapi.io/) is the mod loader for Stardew Valley. It loads mods into the game, provides APIs for mods to use, intercepts errors, and backs up your save files automatically.
and dont use curseforge
Late reply but maybe your copy of SV is in a different folder?
It's usually in Disk C: (where Steam is normally installed unless otherwise). Maybe it's placed somewhere else?
hello and good morning everyone. I'd like to ask for support regarding the generic mod config menu mod by spacechase0. i am playing on steam. if i press the button on the home screen to open the menu, the courser will be stuck in place. i can't press on other windows even if its not full screen. i have to pen a browser window using my keyboard. if i try to access the menu in game, the courser slides to the top left and also won't move. I've only got it to work once but for about 10 minutes and then it no longer did. i uninstalled, updated and started from scratch several times. i look forward to your assistance thank you.
here is my smapi log: https://smapi.io/log/d68e73a5b83b4ec490c2dd60a756585f
Log Info: SMAPI 3.18.6 with SDV 1.5.6 (build 22018) on Microsoft Windows 10 Home, with 6 C# mods and 1 content packs.
i know that the mods technically conflict according to vortex but this was the set up i had when it worked the one time
For some reason I keep getting the same mail every time. No matter how many times I click on it and read it, the mail refuses to disappear. I don't know what I can do?
do you have FeTK? if so get rid of it
Yeah I do
Why is that the cause?
its outdated and causes that sort of issue
idk, because its outdated, i dont know the exact reason lol. and theres literally only one mod that requires it, something about tool delivery. i believe the replacement for that is mail services mod
i dont think so
generally mods can be added or removed midsave without issue (unless they say so in the description. always read the description thoroughly)
Do you still get achievements on Steam if the game is modded?
If you still launch the game via Steam, yes.
Unfortunately yes
Don't you have to launch the game through SMAPI.exe?
hi, ive installed a LOT of mods into my mod folder and the game launches well, there is no show error in the smapi console but some of the mods just arent loading into my game? e.g no to-dew list and no ridgeside village. Anyone can help?
!log
Can you upload your SMAPI log to https://smapi.io/log (see instructions on that page) and share the link here? Even if your game doesn't show any errors, logs are useful, and often necessary, for troubleshooting.
hi nonu i see that you have alot of mods have you ever had issues with your courser not working?
!launchoptions
If you're using Steam or GOG on Windows, you will need to set your launch options in order for Steam/GOG to automatically launch with SMAPI. The SMAPI installer will tell you what to set as the launch options when it completes (green text). You can find instructions (with screenshots) on how to do that here: https://stardewvalleywiki.com/Modding:Installing_SMAPI_on_Windows#Configure_your_game_client
no, i havent
ah okay i see. do you happen to know another place i can ask about these issues?
hey, here is my log: https://smapi.io/log/f88c844e5e204a99a6c896eb08b0228d
Log Info: SMAPI 3.18.6 with SDV 1.5.6 (build 22018) on Microsoft Windows 11 Home, with 33 C# mods and 23 content packs.
so Ridgeside village isn't present in that log at all
And to-dew is and is loading fine
So I'm assuming it's user error on the To-Dew side and you just don't have RSV in your mods folder
omg i miust have installed of the required mods for ridgeside but didnt install ridgeside 
you might want to check the config for to-dew, there's a key to hide ot completely
thanks for the help 
maybe you hit it or it's invisible by default
YES thank you both so much both the mods are working now and my game is running smoothly 
yippee!
1 finale thing, anybody know the mod name for viewing your enitre farm from a birds eye view?
thats a vanilla feature, go to the settings menu then scroll all the way to the bottom. click the camera button then go to the destination folder
oh, thanks
im playing on android and when i leave the house for the first time after the dialogue for lewis goes away im stuck with this popup thats off screen, anyone know why its happening?
!androidsmapi
Android SMAPI does not currently work for versions of SDV past 1.5.6.39. We do not know if or when it will be made compatible. It is not possible to downgrade to .39 through legal means so do not ask how to do this.
Mod support for 1.5 on Android is still experimental, so many mods are broken or buggy. That's often something SMAPI needs to fix, and we may not be able to provide a solution.
!log may help but realistically speaking likely just an Android SMAPI bug
Can you upload your SMAPI log to https://smapi.io/log (see instructions on that page) and share the link here? Even if your game doesn't show any errors, logs are useful, and often necessary, for troubleshooting.
Curious, is modding on the steam deck difficult?
Or better asking, if it’s not too tough, does it run well if i try and mod it a lot? I haven’t found much discussion on this properly so I was curious if anyone here knows hahah
Modding on the Steam Deck seems to be relatively normal as we often get people in here troubleshooting Steam Deck stuff (and it working perfectly fine). As for "modding a lot"... it's definitely not on PC level of a lot of modding, but it can still run like 500 mods fine IIRC
If you decide to mod on the steam deck though make sure you know how to get your log first
Log Info: SMAPI 3.18.3 with SDV 1.5.6 (build 0.0.0.0) on Android Unix 6.1.25.14, with 44 C# mods and 4 content packs.
Oh when I meant a lot I thought like 50 mods is a lot hahaha I wouldn’t be anywhere near 500 for steam deck
ty for the notice though! Will dig a bit on to see how to actually do it
!gettingstarted there should be a guide specifically for steam deck here
If you would like a guide to setting up mods for Stardew Valley, check out the getting started guide! https://stardewvalleywiki.com/Modding:Player_Guide
Oh there’s an actual steam deck tab perfect thanks!
im gonna add that im playing with a controller, ill see if not using one helps
wait - you're playing... android SMAPI... with a controller??
yes
I have several questions but since I can't really help too much with it I'm just... not gonna ask
i dont have any mods that add keybinds
anyone know if i can change the settings for consoles anywhere besides in game? or should i try on the vanilla version?
it thinks im using a controller not a mouse
@hard niche Android mods are extremely broken to begin with, AND you have several that are known to be broken even on PC
BJSTimeSkipper, FeTK/Tool-Upgrade Delivery Service
ill see what removing those do
tried it vanilla version and i cant move anything i had to reboot my computer. is this an issue with the computer itself?
do you have a controller connected?
also try verifying the game files
i dont own a controller
how do i verify the game files?
i was playing with steam link on my tablet is that affecting it? currrently not though
*currently
in steam you find the gear icon on the launch page for stardew, then on properties. it will open a new window. somewhere on there is an option to verify game files
the integrity right?
yes
it says all files validated
try again
okay
also see in windows settings for any input devices that shouldn't be there
like in bluetooth?
because something keeps connecting there but i dont have that and i cant get rid of it it keeps coming back
i get 2 things a keyboard icon that just says wireless device and vjoy
driver
i doubt it