build-help
[SOLVED]Buffer error
Tuning
[SOLVED] TN Pro not doing anything
Tuning
[SOLVED] Turtleneck buffer test - trailing endstop is not triggering
Other
[SOLVED] - Error - Section 'afc' is not a valid config section after updating Klipper and Moonraker
Other
Switchwire box turtle setup
Tuning
Build Issue
Other
(Solved)Never had extrusion distance error
Tuning
Bowden Calibration Fails with XOL Metrix Toolhead
Tuning
[solved]Cannot load spools while printer is actively moving or homing
Other
[SOLVED] MCU Error during connect
Build Issue
[Resolved] Lost Communication with MCU 'Turtle_1'
Other
[Solved] Spoolers not spooling
Tuning
"over-extrusion" during / after tool change
Tuning
[solved] help with the final setog the initial startup first load of filament
Tuning
Other
Trident Owners: Tell me about your poops
Tuning
(SOLVED)Trying to get waste down
Tuning
EBB MMB with Boxturtle respoolers behaving funny
Build Issue
[SOLVED] Using EBB 2209 Can with AFC-Lite
Other
[SOLVED] - AFC POOP Macro issue?
Tuning
[SOLVED] Turtleneck buffer confusion
Tuning
Help getting software setup.
Build Issue
Other
Turtle Neck not stopping filament once fully expanded during auto_calibration
Tuning
Other
[SOLVED] Getting error trying to flash AFC via USB
Build Issue
Other
Printed corner issue
Build Issue
[Solved] Voron 2.4 Fitment Woes
Build Issue
[SOLVED] Weird Issues
Tuning
Build Issue
hub cut
Build Issue
Need help with preparing.
Other
LDO Kit Gears
Other
[SOLVED] Problem with filament swaps ejecting so much the lane load is not triggered.
Tuning
[SOLVED] Bowden Calibration Not Working
Tuning
Other
Spooler shaft no grip on 30T (LDO Kit)
Build Issue
connection
Build Issue
[SOLVED] Extruders skipping on tip forming, speed settings appear to do nothing.
Tuning
(Solved) One lane gets to extruder, but doesn't engage with extruder gear (all other lanes OK).
Tuning
Other
(SOLVED)Change spooler motors
Tuning
Build Issue
Other
Spoiler not going together right
Build Issue
[Resolved] Continuing to get "HUB NOT CLEAR WHEN TRYING TO LOAD
Tuning
Build Issue
1.I get a message on line 14 that could be
Build Issue
[SOLVED] Load, poop, kick problems
Tuning
[SOLVED] Hub catching filament in lane 4
Build Issue
question about usb [SOLVED]
Other
Spooler nor run Freely Mounted!
Build Issue
[SOLVED] Spooler to much rolling when TN trailing triggered?
Tuning
Other
(Solved)Movement out of range
Tuning
Other
Spagetti 🍝 everywhere [SOLVED]
Tuning
Other
Error on unload [SOLVED]
Other
M8P v2 CAN setup
Build Issue
Having to resume print after purge line
Tuning
Build Issue
Other
Respooler Motors skipping
Build Issue
[SOLVED] Lane 2 and 3 keep rewinding to far and disengage stepper.
Tuning
Build Issue