build-help
AFC Lite Board won't go into DFU mode
Initial Setup
mcu 'mmu': Unable to connect
Initial Setup
Spoolman assign spool error[Solved]
Other
(Solved)Spools are going haywire!
Tuning
Initial Setup
SOLVED Canbus AFC Lite Issue
Initial Setup
Print quality while using BT multi color
Tuning
[Solved] Losing steps/motor position sometimes during AFC cut
Build Issue
[Solved] TTC
Tuning
Other
AFC_CALIBRATION not popping up GUI [SOLVED]
Initial Setup
[Solved] troubleshooting my new BT
Initial Setup
(Solved) Problem with initial T0, T1, T2, T3 testing
Initial Setup
[SOLVED] MCU Turtle_1 TTC
Tuning
My TN pro doesn't really do anything
Build Issue
Load trigger does nothing
Initial Setup
One Lane Will Not Load to Head and a couple questions.
Build Issue
Initial Setup
START_PRINT and Machine G-Code
Initial Setup
[Solved] Spoolers just don't work
Tuning
Build Issue
Initial Setup
Need help in connecting the AFC lite to my Micron
Initial Setup
(Solved)Can’t calibrate, just continues to feed even after the filament has reached the tool head.
Initial Setup
[Resolved] Poop sticking to hotend
Tuning
[Solved] Hotend Specific Values in AFC for Phaetus Rapido HF (Filamatrix)?
Initial Setup
Box turtle with mmb and pi pico with drv8833 for motors
Initial Setup
hub question [SOLVED]
Tuning
roll of filament winds in the wrong direct how do i reverse it [SOLVED]
Tuning
Extruder not unloading enough during change
Initial Setup
Cannot locate [a]_hub_D2HW.stl in repo
Build Issue
Cant calibration
Initial Setup
boxturtle LDO Kit - all respoolers and leds not working
Initial Setup
[Solved] Lanes binding
Build Issue
Create a "Virtual Bypass" switch?
Other
[Resolved] Lane 3 extruder not turning on when trigger is engaged
Initial Setup
[Resolved] - Working through initial startup and running into issues...
Initial Setup
Comissioning Help
Initial Setup
[SOLVED] trouble with hub holding switch in place
Build Issue
Lane 1 respooler not moving
Other
How do you keep the BT Extruders from chewing up the filament with XOL Metrix
Other
[SOLVED] Lane 3 not reacting, pin_tool_start error
Initial Setup
AFC MCU Discconect! (Solved)
Other
Respooler motor issue and print/start macro issue
Tuning
Print resume problem?[SOLVED]
Tuning
Respoolers Will Not Rewind when Ejecting and LED's are not working
Build Issue
[SOLVED] Having movement issues with macros POOP and KICK
Other
Nightowl running AFC [SOLVED]
Tuning
[SOLVED] QUERY_BUFFER BUFFER=Turtle_1 UNKNOWN
Build Issue
respoolers not turning smoothly
Build Issue
AFC BYpass to external Dryer! (Solved)
Tuning
Other
Internal error on command:"PREP" (stepcompress)
Other
[RESOLVED]AFC plug-in klipper help
Tuning
3 out of 4 N20 motors will not turn.
Build Issue
Odd calibration/tuning question
Tuning
Build Issue