build-help
TurtleNeck Problems Solved
Tuning
GSTAT error [SOLVED]
Other
Setup hotend specific values
Initial Setup
[SOLVED] BT - first filament manual change waits for 25 degrees (when printer is restarted)
Tuning
[Solved] Bowden length
Tuning
spooler help (solved)
Tuning
Help with setup can to AFC Lite and LDO Levithan
Initial Setup
[SOLVED] BT Setup and Calibration
Initial Setup
[Solved] My BT will not load lane one any more says locked not loaded and RED color
Tuning
[Solved] Spools move forwards but not backwards.
Tuning
Initial Setup
initial lane prep
Build Issue
Initial Setup
Print won't stop
Tuning
Build Issue
Other
[RESOLVED] Weird vibration sound in FilaMatrix
Other
[Resolved] Internal Error on Command 'PREP'
Initial Setup
When printing respooler is not advancing the spool. It's just getting pulled by the extruder.
Other
Respooler crunchy and binding during build
Build Issue
[Solved] AFC_CALIBRATION not working
Initial Setup
[solved]Look at this problem for me!! lane1 FAILED TO LOAD TO TOOL, CHECKFILAMENT PATH
Tuning
Build Issue
Lane isn't extruding while head is
Other
[Solved enough] Odd Bowden Lengths between lanes
Tuning
[SOLVED] BT Extruder 2 Jams in Hub
Tuning
Initial Setup
Brush Macro Error
Initial Setup
tool head start sensor
Initial Setup
Poop staying attached to nozzle
Tuning
Solved 2nd AFC Lite Board
Initial Setup
extruder 1 filament keep getting stuck
Build Issue
Initial Setup
Other
Solved - Box Turtle MCU not connecting
Initial Setup
where to put the AFC macros in jontek2/A-better-print_start-macro?
Initial Setup
Other
Using second box turtle, leds on box turtle 1 suddenly don't work
Other
[SOLVED] MCU shut down on start up
Initial Setup
Hub Sensor not always working (solved)
Other
[Solved] LDO Box Turtle build toolhead wiring with EBB36
Build Issue
Mainsail-afs.zip
Tuning
Other
Solved 2 AFC boards Connection help
Other
klippy issue, moonraker log
Other
Color swap issues (solved - pooping and purging)
Tuning
lane 3 error (solved)
Initial Setup
how to flash AFC [solved]
Initial Setup
[Solved] Problem trying to get everything on line for the 1st time
Initial Setup
Solved Time To Tune
Tuning
Build Issue
loading toolhead extruder
Initial Setup
Z lift at Poop
Tuning
[SOLVED] Change to where runout is detected.
Other
[Solved] Would a 5-lane box turtle fit on top of a Voron 2.4 (350mm)?
Other
NOT READY, LOAD TRIGGER NOT TRIGGERED (Solved)
Tuning
[Solved] Only printing one color
Initial Setup
Cannot find UUID [Closed]
Initial Setup
[SOLVED]filament change not triggering
Initial Setup
Problems setting up box turtle bowden length and many more.
Tuning
Initial Setup
[Solved] MCU wont connect
Build Issue
Initial Setup