#arma3_troubleshooting

1 messages Β· Page 131 of 1

wise barn
#

it is what it is

#

but once you arrange yourself with the fact that arma is not a high FPS game, it can be played very well

fierce kayak
#

😦

earnest heart
#

That said

wise barn
#

trust me, FPS are not important in arma

#

well, not THAT important

fierce kayak
#

we dont live in 2010 where you only have 30 fps

earnest heart
#

If your Steam play time is less than two hours, I expect that they'll issue a refund

#

Funny you'd mention that... this game was released in 2013

fierce kayak
wise barn
#

it will

earnest heart
#

the screenshot doesn't show me anything about your RAM, unfortunately, which is why I linked the video... it's someone playing Arma 3 multiplayer with the same CPU as you have

fierce kayak
#

nah 16 gigs of ram i have

wise barn
#

see it like so:
this game is what you make out of it. if you find a good community with a bunch of like minded folks, even low FPS don't bother anymore.
i used to have my best memorable OPs in arma 2 with 15FPS

#

and since you are german, with your permission, i'll DM you two discord servers of german communities

fierce kayak
#

that would be nice, thx

pine kite
#

Bug or not in the launcher. Can't get official servers on the official tab either. Maybe because Beanos and I are 'neighbours', who knows.

earnest heart
#

Only 2x DDR4 SO-DIMM, Dual Channel, bis zu 64 GB

wise barn
#

@fierce kayak
mind accepting my request for DM?

earnest heart
#

so I cannot compare your RAM against that in the video (DDR4-3200)

fierce kayak
fierce kayak
wise barn
#

πŸ‘

earnest heart
#

in any case, I do see that in that video the player was getting around 40 fps on average, 30 fps when inside small buildings

fierce kayak
#

its the game's fault

pine kite
#

Perhaps, but it is what it is.

earnest heart
# fierce kayak its the game's fault

Which is why I mentioned getting a refund from Steam if your playtime is less than two (2) hours... there's not much else I can point to for FPS other than lowering the visibility (view distance) settings in the graphics options, and disabling the Picture in Picture (PIP) setting

#

If you won't take audiocustoms or Valen's advice and don't want to try tweaking the graphics settings, then that's all I can offer

#

That, and 'this isn't 2010'... but this game was announced in 2011 and (as per the Steam store page) released in 2013

fierce kayak
#

hmmmm okay

#

i wont refund... i payed 6 € and thats not much.. . maybe ill give it another try some time.

earnest heart
#

Fair enough

#

I used to play Battlefield 3 from 2011 and iirc that was a 30 fps kind of shooter game

fierce kayak
#

And hopefully it gets performance update where i can play in more then 30 fps

#

i switched from ps4 to pc bcause many games only run on 30 fps

pine kite
#

Performance update have been released recently. But no miracles have happened.

fierce kayak
#

Arma is notorious for being CPU-bottlenecked because the Real Virtuality engine doesn't really have much in the way of multi-threading support. Pretty much the entire game is run off of a single CPU core. There are certain tricks you can do, particularly in multiplayer, to help alleviate this (such as running a headless client to offload AI processing to a client, which can run as a separate process on the same machine or a different one) but honestly it's pennies to the dollar in terms of effectiveness. This is one of the reasons why Bohemia is working so hard on their Enfusion engine for their next generation of games -- it doesn't have this single-core limitation since it's mostly based on Enforce rather than Real Virtuality. From what I understand, the new Enfusion engine is so named because they are essentially working to re-code the important parts of the RV engine in a way that's compatible with Enforce so that it's sort of a fusion of the two engines, although the goal is to eliminate all the modules from RV entirely. I heard that they succeeded in doing this now for DayZ standalone (where there is no SQF script used in the game at all anymore, it's all done in Enforce's scripting).

#

found this on reddit

pine kite
#

Indeed, it requires a revamp of the engine to make it much faster ( I'm not a software engineer, just a support guy by trade)

earnest heart
earnest heart
fierce kayak
earnest heart
#

Oh, I just linked that in case you considered picking up DayZ... it's really off-topic otherwise

fierce kayak
#

oh okay, i have it in my wishlist already on steam

earnest heart
#

ahhh ok

fierce kayak
#

πŸ‘

earnest heart
#

For how-to-play, there's a lot of SP content to choose from in the base game alone

#

a bunch of tutorial stuff, almost a dozen 'Showcase' missions, and a full SP campaign with a lot of missions

hasty prism
#

no servers showing up official? its inf loading

earnest heart
#

I'd say server:official but some servers admin like to use 'Official' in their server name

hasty prism
#

alr joining one

earnest heart
#

Hence the usual recommendation to use the launcher's server browser (because it'll handle mod subscription/loading before you try to connect to a server)

#

There's also the in-game Quick Play button, but that's limited to servers that allow/require whatever mods had loaded when you you started the game

fringe salmon
#

Experiencing an odd issue:
ARMA recently reinstalled after a few days, and decided to setup a new profile and work on keybinds. However, every new boot up resets game, video, and keybinds settings. Occasional mass FPS drops occur in-game where video settings are reset mid-gameplay. Does anyone now how to handle this?

untold lynx
#

How do I fix Angola addon brg africa not found
when I try to play on a multiplayer server

winter marsh
#

hello my friend is having problem running arma after art of war update

wise barn
#

more info

steady hawk
#

Nobody can help him unless you tell us anything about the issue

winter marsh
#

this is his crash report

wise barn
#

ok, but what's thew issue?

winter marsh
#

game crashes

fringe salmon
#

my friend accidentally deleted all the arma 3 firewall rules on the firewall advanced security page, how does he get them back? whenever he launches arma it doesnt ask him to make an exception as if you were launching the game fresh, instead it just shows the multiplayer server list as empty. how can he re-add the firewall rules? we tried adding a port rule from udp 2302-2306, didnt work, we then tried adding arma3_x64.exe as an exception and it still didnt work. any fix?

wise barn
#

with what message?

winter marsh
#

that is the crash report generated afterwords

wise barn
#

there must have been a big window with an actual error message. what does it say?
(screenshot plz)

steady hawk
#

The crash report does contain no useful report. More situation is needed

winter marsh
#

Ok i will tell my friend to screenshot the error

#

Once he send me the screenshot i will get back to you

true jetty
#

Hello, I'm Mootaz's friend
My issue is that I get a Status Access Violation

wise barn
#

there must have been a big window with an actual error message. what does it say?
(screenshot plz)

true jetty
#

I have the screenshot but discord isn't letting me paste it here for some reason
Is it alright with you if I PM you the screenshot?

steady hawk
#

imgur it

wise barn
true jetty
#

Roger
I'll do that

wise barn
true jetty
#

Already tried all those solutions and no luck
Also updated MSI Afterburner and no luck on that front either unfortunately

steady hawk
#

Did you verified the game?

true jetty
#

I have
All files verified without issue

eternal needle
#

dang

#

any way to add an attachment?

steady hawk
#

Read few posts above

eternal needle
#

keep getting this error every time i load into a game about 5-10 min after

uncut trellis
#

so same link for you that Audiocustoms posted above

eternal needle
#

didnt see that, but yes, it is.

#

fresh install.

uncut trellis
#

test the steps mentioned for your error message

#

as in the one that the link goes to

haughty parrot
#

i cant place the morter backpack

humble wagon
# haughty parrot i cant place the morter backpack

The morter is setup out of 2 pieces both parts are a backpack itself (bipod and tube), due to the size the will not fit in a regular backpack. You can load up both backpacks in vehicles to drive them around to a good position to use them.

haughty parrot
#

ah

humble wagon
#

You can also only carry 1 backpack so either you take a good filled personal backpack (extra ammo/medkits/grenades/explosives) or 1 of the 2 morter backpacks πŸ˜‰

storm arch
#

Tag me as you read

tiny imp
#

typical false positive, complain to developers of security software who can't even figure out that digitally signed files served to millions (or more like tens of millions of users) playing games aren't suspicious

storm arch
fringe salmon
#

Hello there, I am trying to start a antistasi server with my friends, I set it as online but yet, my friends cant find the server, I've tried re-hosting and have different people host same problem server cant be found, can someone help me out?

fresh quest
fringe salmon
#

Yra

#

Yea*

fresh quest
#

Do you have an external IPv6 adress?

fringe salmon
#

Yes

fresh quest
#

Read from there what i wrote

thorn swift
#

Trying to sort out my server hosting issues, but first; when I run the editor on Altis, I get a brief popup "Script functions\fn_flow.sqf not found". It doesn't seem to have any consequences, but it is worrying.

uncut trellis
#

that comes from some mod or mission

thorn swift
#

Except it cropped up when I was on pure vanilla, trying to resolve my server issue

uncut trellis
#

there is no such folder or function in vanilla

#

you may want to verify that you were not running any mods or custom missions and that you have not accidentally put mod pbos along the vanilla pbos

thorn swift
#

No mods, no DLC, I was rapidly flicking through missions to try and fix my server issue, opening the editor too - which would often have the previously loaded mission's loading screen flash on it.

uncut trellis
#

then likely it is some mission thing looking for that folder/file

thorn swift
#

Great t_t

#

Ah well, like I said, it's no big deal.

#

My main problem is hosting servers, and trying to get other people to join on me.

#

When I host locally, it takes ages for the role selection screen to populate for me... if it does at all.

#

Oooh, update, I think it's the Warlords missions, since when I have that one last loaded and then open the editor, no missing sqf warning.

#

Hrm... nope, it's the Bootcamp mission, when I have that loaded previously, it's warning time

fringe salmon
fresh quest
#

You need either DS or IPv4 only

fringe salmon
fresh quest
#

Arma can NOT utilize IPv6

#

And what are you trying from console?

#

Maybe there is a language barrier, but your windows has nothing to do with DS Lite and DS, your Internet Service Provider sets it for you, you have no control what so ever about it

naive kraken
#

@brave hawk it's not exactly mine problem, but a problem of my friend, he's not here on this server, what should we look for in the cache?

brave hawk
#

you should use the Steam option to check game files, so it re-reads them and check if some are corrupted (and fix them ofc)

naive kraken
#

and what should we do in case this does not help?

brave hawk
#

come back here and try something else 😬

#

I haven't heard of this issue yet, first time

#

(for the record:)

Since the release of the newest update (with the new dlc) game always crashes after approximately 2 minutes of playing.
0xC0000094 - STATUS_INTEGER_DIVIDE_BY_ZERO

naive kraken
#

allright

naive kraken
#

@brave hawk no results, game files are complete

brave hawk
naive kraken
#

issue is still present and this is the modpack

brave hawk
#

try without mods, see if you can do it vanilla?

pine kite
# fresh quest <:meowthis:700765422726807613>

Having a IPv6 address is not neccesarily the cause or indication of why Arma 3 doesn't work. It's having no IPv4 address that is routable across the internet that is the problem. IPv4 and IPv6 can co-exist in a home network. But yes, if the ISP provides an IPv4 address that exists only in their network, then Arma 3 won't work.

gusty snow
#

When I attempt to load in a modpack, it says "We didn't find any new mods to subscribe to." It normally loads the mods, but in this case it doesn't, anyone know how to fix?

fresh quest
# pine kite Having a IPv6 address is not neccesarily the cause or indication of why Arma 3 d...

You almost perfectly described DS Lite, only thing is the IPv4 is public but shared and the only allowed routing is done by the ISP.
What my reasoning for the suspicion of DS Lite beeing the issue is that DS Lite is a cost saving measure by ISP (as they dont need as many IPv4 that are sparse and pricey) so in about 99%(yes i just pulled that number out of my butt) if a normal end user has a IPv6 its pretty safe to assume its DSLite

pine kite
#

High chances, but any one opening a command window and executing ipconfig /all or looking into their router config will likely see IPv6 addresses of some kind. That is only giving false positives as indications.

fresh quest
pine kite
#

Better indeed is to ask the ISP if the connection is DSLite.

fresh quest
#

You usually cant see the external IP adress in your ipconfig

pine kite
#

Correct also, that's why I mentioned router config

fresh quest
#

Im a little confused right now at what we are arguing about?

pine kite
#

Having an IPv6 is not a clear indication.

fresh quest
#

External IPv6 -> high chance of DS Lite -> contact your ISP to ask /fix

wise barn
fresh quest
wise barn
#

haven't been following the convo, but:
arma server via IPv4 = good
arma server via IPv4 on DSlite tunnel = not good
arma server via IPv6 = not good

pine kite
#

Testing if both sides can ping the IPv4 address would work to test this. If it was not for the likely chance that routers may not respond to ping/ICMP Echo requests.

fresh quest
#

^ arma server via IPv4 on DS (non Lite) = good

fresh quest
wise barn
#

any tunneling via IPv6 is not good

pine kite
#

Sometimes you can find an option to enable this in the router config. But that is even scarrier for people than attempting port-forwarding.

fresh quest
#

Make a webserver, make a portforward of port 80 to the webserver see if you can open it externally from any briwser via IPv4

#

If you have IPv6 and it doesnt load you most probably have DSLite -> recheck setup -> if still doesnt work-> contact ISP
If it works and you have a IPv6 you have DS-> check your port forwards for arma

pine kite
#

I think you meant Dual Stack in the last line

fresh quest
#

Generally if you dont know how to check if a portforward is setup properly or how to test it, you will need to call your ISP simply to know what DS Type you have

#

Because otherwise you will never know where the error actually happens

#

Sadly there is no way around it, been there ,did that

pine kite
#

Unfortunately checking with the ISP is the only sure way to know this. (for Joe Gamer wanting to multiplay) I agree. It's sad that this can take multiple days to get an answer.

fresh quest
#

I usually just call the technical support hotline and tell them my portforwards dont work XD

#

They can tell it to you in about 1 min

#

That way i got my fancy IPv4 only connection without paying extra XD

pine kite
#

I guess your tech supports have shorter wainting queues and 24/7 response.

fresh quest
#

More of 1 to 2h phone queue

#

You should not call them when there are country wide issues though XD (Vodafone Germany BTW)

pine kite
#

Ahh, then we are nachbarn πŸ˜‰ Ziggo Netherlands.

wise barn
#

@fresh quest
wait a sec... you got vodaphone to give you an IPv4?

fresh quest
#

Yes

wise barn
#

dafuq? πŸ˜„

#

how?

fresh quest
#

I said i have an issue and my stuff doesnt work

#

Said i need port forwards

#

Got a IPv4 only connection

wise barn
fresh quest
#

Yes XD indeed

#

But i must say i had a whole lot of 2 outages for the last 5 years and 1 of those was a cable beeing dug up down the street so no blame on them

#

Otherwise no issues what so ever (besides phone not working sometimes, but i dont use it so hmm)

wise barn
#

they somehow fried my modem 2 times now when updating the firmware πŸ˜„

quaint jewel
# wise barn how?

I know a guy in vodafone customer support in germany, maybe he can help with things

eternal needle
#

so nothing has fixed the constant crashing.

#

my gpu is only at 40 degrees celsius

#

no headphone

brave hawk
#

without mods?

wise barn
#

(when the time comes πŸ˜‰ )

eternal needle
#

@brave hawk if thats to me, yes its fresh install. never installed a mod yet.

#

have just tried linking my account with hope but im not sure thats a problem.

#

cant make it through even half a mission before crash smh

gusty snow
#

When I attempt to load in a modpack, it says "We didn't find any new mods to subscribe to." It normally loads the mods, but in this case it doesn't, anyone know how to fix?

pine kite
#

And if you list ports seperated by commas then add a space after the comma.Windows advanced firewall is picky apparently.

eternal needle
#

any advice for changing memory allocator?

#

i keep getting this error

#

'malloc' is not recognized as an internal or external command,
operable program or batch file.

brave hawk
#

use the launcher to pick the allocator you want?

eternal needle
#

thought i had to use cmd

#

pretty new around here so my apologies

brave hawk
#

no problem!

#

in the Parameters tab

unknown.png
eternal needle
#

thanks i found it! im having issues the game never goes more then 5 min once loading into a map before crashing

#

have tried everything except the allocator

#

maybe i should try 32 bit

brave hawk
#

try without mods?

eternal needle
#

i have no mods

brave hawk
#

wait sorry you already answered that

eternal needle
#

all good

#

i have tried every thing on wiki tho so im stumped

brave hawk
#

all drivers up to date, Steam files cache checked?

eternal needle
#

yeap

#

well updated gpu just a few min ago, same problem

brave hawk
#

(I can recommend Driver Booster on Steam, free and does the job)

vast mirage
#

Im trying to play one mod scenario, but for some reason when i install it from steam it doesn't show up into the launcher

pine kite
#

It doesn't have to if it is not a mod. Have you checked the Singleplayer/ Multiplayer scenario sections in the game itself?

vast mirage
#

oh i haven't checked the multiplayer scenario yet, let me try that

#

uhh where can you see that section?

#

oh wait i think it said that it had to be hosted

pine kite
#

Singleplayer/Scenarios/choose scenario or Multiplayer/Quick Play/Host Server/(accept server setting with Host Server button)/choose mission in Create game menu.

#

Antistasi Community by any chance?

eternal needle
#

allocator fixed it guys

#

thus far atleast

#

10 min in

#

furthest ive been

vast mirage
#

uhh theres 0 missions

#

maybe i have to download it manually?

pine kite
#

Workshop missions should appear unless it was uploaded borked to begin with.

#

Maybe restart Steam and the game first.

vast mirage
#

oh dammit, there was an older version of the map and an newer one on the list so the mission didnt show up on the older one. its on the newer one tho, so problem solved

rain mauve
#

I got kicked from game multiple times today, one of the error was something about battleye.

  • I am using profiling branch beta exe
  • I have deleted battleye folders and reacquiring it by verifying from steam
  • I have restarted both steam and my pc
    I have multiple .rpt and mdmp .files (will attach)

Any help would be greatly appreciated. Thank you

#

(nvm can't attach files)

fresh quest
#

BattleEye Query Timeout?

fresh quest
rain mauve
oak hamlet
#

cant seem to find out why i put my map name in the server template cfg it doesn't set it as the map

fringe salmon
#

game run bad

#

40-60 fps

crisp sable
#

that is how arma do

carmine smelt
#

Hello. Me and my friend just got ARMA 3 yesterday and we're having a weird issue where our mics are being delayed. Whenever we first get onto one of the servers our mics work fine for the first time we press the PTT key. After that there is a delay where we cannot hear each other for quite some time. I'm not sure if we are doing something wrong or if this a weird bug. I've tried uninstalling and reinstalling as well as tinkering with the settings in game. Windows is definitely picking up the sound and I am using chats in other game with no issues. Has anyone run into this before or have any ideas what could be going on/what we could try?

novel schooner
#

anyone having issues with player slots since the latest dlc/update? I thought it was just some mod issue with my latest mission, because upon launcing on my dedicated server or local host, there were no player slots. I've had a similar issue before that is usally fixed by merging the missing with a new SQM, but no dice here. I managed to get it working after starting and restarting the mission in the editor a few times, which is strange, but upon hosting in dedicated no slots still, and it's random whether these slots will show up in the editor/local host. But after trying to host in vanilla with no mods, I still get the issue, no player slots despite playable/player boxes ticked. I even tried launching an official mission and I get the issue.

I haven't seen anyone else really with this issue except one post on the steam forums, anyone got any clues? I'm currently reinstalling the game so hopefully that fixes it.

oak hamlet
carmine smelt
#

If I end up not receiving any help in here is there somewhere I can submit a ticket or something of the sort?

wise barn
#

@carmine smelt
tried another server?

carmine smelt
#

We've tried a few servers

#

All official servers

wise barn
#

tbh, this is the first time i'm reading about such an issue... and i have read about a a lot of issues

carmine smelt
#

Yeah. I've scoured Google and I haven't been able to find anything like this even mentioned

novel schooner
#

Okay I completely reinstalled Arma 3 and all mods, I still get the playable units thing even with no mods installed. Doesn't seem like a widespread issue at least, but it kind of messes up my plans since I run an Arma group and I can't seem to get any new missions working(old ones work sometimes?). Any help appreciated

#

wait maybe it is working vanilla, will double check

novel schooner
#

okay reinstalling seems to have fixed it mostly still some issues in editor but with some fiddling I got it working

haughty parrot
#

i cant use a uav in the virtual arsenal

earnest heart
haughty parrot
#

Yes

sacred perch
#

Cant connect to any server it is saying "Connection Failed"

unkempt oar
#

Help! I dont know how to disable this performance monitor and its really annoying

steady hawk
#

It's thirdparty something. Not Arma related

unkempt oar
#

my bad

clever nova
#

Hi, I bought Arma 3 some days ago. I'm trying to host a server to play private matches with a friend of mine, but I can't figure out how to do that. In fact, we've already created the server, but my friend can't see it and I can't see his when he creates one. I've already opened ports 2302 and 2303, but it doesn't work. Can someone please explain how should I create it?

wide meadow
#

what is your IP adress? Is it IPv4 and is it a public one or behind Dual-Stack/Carrier-Grade-Nat?

clever nova
#

Explain please?πŸ˜…

wide meadow
#

go to your router and look what IP address you have there listed (the one you get from your provider). then look on this site https://www.whatismyip.com/ what it shows for a IP. if your router and the website shows two different IPs then you are behind carrier grade nat and won't be able to play just like that with friends

heady harness
#

hi i'm his friend, i have the same public IP but when i go to console command and ipconfig they are different

wide meadow
#

ipconfig doesn't show your public ip, just your private. In this case we have to sort out if your network is reachable from outside or not

#

and you can look that up in your router which shows your IP from the provider and from the website I mentioned which shows how your IP looks to the rest of the world

heady harness
#

ok

#

they are the same

#

my friend's too

wide meadow
#

IPv4?

heady harness
#

public IPv4

wide meadow
#

good then it's just a port forwarding issue. make sure that inbound/outbound port (2302 if you keep it default) is forwarded to the private IP of the PC you want to connect to (normally starts with 192.XX or 10.XX)

clever nova
#

yeah we have opened TCP and UDP 2302 and 2303

heady harness
#

i have even enabled UPnP

wide meadow
heady harness
#

yes i know that its bat to have it enabled but i tried to see if that worked

clever nova
#

I made a mistake because probably I didn't allow it, how should I do to enable it?

heady harness
#

how do i allow arma in the firewall?

wide meadow
#

you normally get the window to allow it the first time you run arma, else you have to go to the windows firewall and allow it there

gusty snow
heady harness
#

done

#

thx now we try to host

#

it works thank you

clever nova
#

Thank you, now it works!!!😊

wide meadow
#

glad it does, have fun πŸ˜‰

hearty dove
#

Hey guys, someone in my community keeps getting random PBO errors. One was a oldman.pbo, the other was this one in the picture. He is able to join our server and was in the game moving around, loading a louadout,etc. Randomly it would then kick him out for a pbo. Any ideas? https://gyazo.com/78a8dac0bdb1f31d87f65e4954a79071

iron garnet
#

Me and 2 other friends are new to the game, when we try to load into servers it either crashes, disconnects, or we get various error messages such as
File mpmissions/__cur.mp.altis/von_plus_gui/gui_elements.hpp, line 22: .rsctext: member not defined

fresh tundra
#

I was doing the bootcamp and it suddenly put me to a blue screen saying there was a problem and my PC was restarting. When I got back my entire PC didn't have audio.

wise barn
#

@fresh tundra
USB audio device in use? Headset, BT dongle, ect?

fresh tundra
#

I have a plugin headset.

wise barn
#

What is a "plugin headset"?

fresh tundra
#

I just plug the headset into my PC.

wise barn
#

With what connector?

#

USB, 3.5mm jack?

fresh tundra
#

I think a 3.5mm jack.

wise barn
#

Is it a rectangle, or round?

fresh tundra
#

Round.

wise barn
#

Ok

#

Did you by now reset your windows sound defaults?

fresh tundra
#

Let me try that.

#

Where would I find that again?

wise barn
#

Your regular windows audio options.
Set the default output device to be your headphones, and your default input device to be your headset mic

fresh tundra
#

I'm there but I'm not seeing a restart option.

wise barn
#

Setting your input and output to what I described is meant to be 'reset'

#

There is no 'option' like that

fresh tundra
#

Oh, they're already set to my headset.

wise barn
#

Double check and test if it's working

fresh tundra
#

Doesn't work.

pine kite
wise barn
#

Reinstall your audio drivers

lilac widget
#

warning: Current Steam AppId: doesn't match expected value: 107410

#

anyone else got this error

wise barn
#

validate your game installation via steam

lilac widget
#

im using ARA

#

Arma Remote Admin so it does it its self

wise barn
#

manual validation

honest trellis
#

can anyone else use the A3 luancher rn? me and my friend cant get it to work

wise barn
#

cant get it to work
define, please

#

@honest trellis

honest trellis
#

never mind works fine now

round slate
#

So I have a small problem with not being able to change my keybinds

#

I press Ok on both windows to save the new ones but it never saves

#

anyone knows a fix to this?

crisp sable
#

are you using the default profile or did you make a new one?

#

cuz typically the base default profile has troubles with keybindings.

round slate
#

New one

boreal cape
#

hello, i have a backpack, it has got an RPG in it but i could not equip it

#

i've tried numeric keys for example 1-2-3, i've tried to drag it to the middle weapon slot

#

nope

#

it does not work

#

what's the problem?

#

here's the screenshot

grim tinsel
obtuse saddle
#

Its a rocket, not a launcher. You're trying to drag in ammunition.

steady hawk
#

That is not a launcher

grim tinsel
#

the item you're hovering over is just the ammo

#

cough let me pass out the ninjas real quick heh

boreal cape
#

πŸ˜„

#

what a shame for me

#

i would like to get lost right now

obtuse saddle
#

Dw, we all did silly mistakes often enough :D

grim tinsel
#

Dotn worry, I've seen much stupider questions in my time here so yours is pretty normal blobdoggoshruggoogly

steady hawk
#

Maybe you can use that ammunation using a hammer and bonk it πŸ™ƒ

boreal cape
#

i would like to get a clean headshot on my head:)

#

by the way i am a newbie, i am a rookie and i would like to join a team, can you help me?

#

what are ur suggestions?

grim tinsel
fast sable
#

When i use my hotas and enable it i get 8 fps, other people with the same mods in our unit are fine with theirs... is this a problem that occurs a lot and can someone maybe help me?

grim kindle
#

Good afternoon, I'm here to see if someone could help me with the corrupt memory error that I get in several games with the battleye service, I've tried all the methods I've found on the internet.
Who can I contact to see if I can solve my problem? I have been trying to solve it for several days.

#

Pls 😒

#

Moderators warned me, sorry I dont know how to use this Discord

#

I only want to solve my problem and play

pine kite
#

Well, Battleye has it's own website. I guess they are the one to support you with problems in different games.

grim kindle
#

Yes but they do not answer me

pine kite
#

How long ago did you contact them? Anyway, maybe they know more about this in #arma_battleye if you post that error.

fringe salmon
#

this the right place for server troubleshooting?

quaint jewel
#

the more specific the channel the better, so probably the server one

hearty shadow
#

When im trying to look for a server to join there are 0 servers showing any help ?

novel herald
#

i recommend waiting

fast sable
#

When i use my hotas and enable it i get 8 fps, other people with the same mods in our unit are fine with theirs... is this a problem that occurs a lot and can someone maybe help me?

weary sky
#

I doubt the HOTAS is causing the low FPS

#

Sounds more like bad hardware or incorrect (graphics) settings

quaint jewel
#

or bad hotas driver

fringe salmon
#

I have seen this before with my steering wheel plugged in, I have to remove it to play Arma. If you leave an xbox controller plugged in that will hijack certain functions as well and sometimes you get stuck walking forward and other weird behaviours. There is something funky about how they by default get bound and sometimes performance tanks depending on the device. Have seen a whole host of weirdness that its on our Troubleshooting page.

void trail
#

guys im trying to set up my joystick, and ive set the fire button to a button on the joystick, however when im flying a chopper instead of firing I command to fire and cease fire, any suggestions to fix this?

safe apex
#

Evening, I'm looking for the command to see which scripts are holding my server performance back. its a command where you can see how long a script takes to execute.

crimson ivy
#

yo im an new player and every time i try to play deathmatch or TDM it says i need to alter parameters and i was wondering which parameters to alter?

wise barn
#

screenshot please

#

upload it to imgur

#

or any other image hoster

crimson ivy
#

lk

#

k

crimson ivy
#

its not letting me screenshot

#

so it says no servers found please try altering parameters

fringe salmon
#

Okie guys

#

I broke arma again

#

Lol

wise barn
#

@crimson ivy
well, then edit your "search" parameters.
how are you trying to join a server?

fringe salmon
#

Trying to replicate the error for you

crimson ivy
#

@wise barn just off the quick play menu

fringe salmon
#

Okay its an issue with one of my mods

wise barn
#

won't work afaik

#

use the arma 3 launcher server browser to join a server

fringe salmon
#

I have over 126 mods

wise barn
fringe salmon
#

I gotta find out which ones broken

wise barn
#

?

fringe salmon
#

Its saying something is already defined at startup

wise barn
#

uhm..... details?

fringe salmon
#

Trying to get that now

crimson ivy
#

lmk if u find a solution

#

thanks

wise barn
fringe salmon
#

wait

#

Got the error

#

I can't link images

wise barn
#

use imgur

#

or any other image hoster

fringe salmon
#

I aint signing up for a new website just to post an image I'll just type it XD

wise barn
#

you don't need to

fringe salmon
#

"File warfxpe_edited\config.ccp, line 5: .BIS_AddonInfo: Member already defined."

#

Happens with mods active

#

Trying to pinpoint which mod

wise barn
#

a mod that contains warfxpe is causing issues

fringe salmon
#

Then the bad_module_info.exe crashes and game commits sepiku

wise barn
#

read above

crimson ivy
#

thanks guys

fringe salmon
#

I hope its not my Hueys helis pack 😧

#

The issue started to happen when I disabled ACE - But I disabled all the dependencies too

#

Now I re-enabled ace and all the stuff I disabled - Same error

#

Welp

#

"Unsubscribe from all mods"

#

I'mma wipe

#

Fixed it

fringe salmon
#

It erased all my saves and has a crashing problem when I customize my character

wise barn
#

profile might got corrupted somehow
delete your profile in documents folder and start over

#

(make a backup first)

steel wharf
#

my game says "restart battle eye" everytime i load into a server, i have done a fresh install and obvs reloaded my game

wise barn
#

go to battleye tab and make sure the box is checked

fringe salmon
#

When I go to player profile and change my characters face then click accept it crashes

wise barn
#

change it to what?
custom face or stock?

fringe salmon
#

Just face

#

But it will crash every time I would try and i just dont know what causes it to do that

#

Actually its glasses too not just face

wise barn
#

did you backup and delete your old profile (documents folder)?

fringe salmon
#

No

#

Should I

wise barn
#

why not?
i already told you so

fringe salmon
#

Their is a vars, den and another profile so idk which ones I delete, all of them?

#

All under the same name

wise barn
#

username*.Arma3Profile

#

those

fringe salmon
#

Is their supposed to be 3 of them tho

wise barn
#

yes. eden, vars and a 3rd

fringe salmon
#

I deleted the main and it not crashing now at least but now I have to do the campaign from the beginning again

wise barn
#

yes, because your profile files got corrupted... somehow

fringe salmon
#

Ok nvm the saves are back when I deleted my profile wtf

stoic stump
#

Anyone have a fix for issue 0x0000005??

quaint jewel
quaint jewel
stoic stump
#

It's a message one of my members gets

#

Issue 0x0000005

#

He can't start arma

steady hawk
#

It's not just 0x0000005 but 0x0000005 STATUS_ACCESS_VIOLATION

fringe salmon
#

He maybe running battleeye with ReShade or something like that?

stoic stump
#

Lemme ask

steady hawk
#

Also STATUS_ACCESS_VIOLATION can be caused by many reasons, there's no β€œone and only” solution

stoic stump
#

What are some common solutions

fringe salmon
#

Send #350 to @chrome pivot

#

thats the ultimate solution

#

πŸ˜„

stoic stump
#

?

#

πŸ€”πŸ˜„

steady hawk
#

Don't make an nonsense joke

fringe salmon
#

Does he have Memory Allocators?

#

Those are a common issue

stoic stump
#

Lemme ask

chrome pivot
stoic stump
#

He does @fringe salmon

#

Fix for that?

quaint jewel
#

@stoic stump the usual way, report the crash (as the Arma launcher tells you) in the feedback tracker, have probably me look at it and tell you why its crashing

stoic stump
#

@sullen dune

quaint jewel
#

The cause of that can be lots.
Reaching from simple bug in game, up to solar flare activity flipping a bit in your ram

stoic stump
#

I pinged him so hopefully he does that

quaint jewel
#

more common issues are USB-Headset, Memory Allocator random messups, hardware issues, random bug in Arma (of which there are lots)

sullen dune
#

ok will try

robust egret
uncut trellis
#

to do what?

safe apex
quaint jewel
#

it logs to a file on server

safe apex
# quaint jewel it logs to a file on server

But the wiki states "the current frame is captured and captured data UI dialog appears".
What youre refering to, isnt that diag_captureFrameToFile ?

Regardless, it logs to Server profile folder I assume?

quaint jewel
#

The server has no UI

#

the server cannot open a dialog

#

so the server just dumps to file instead

safe apex
#

Understood. And where does the server dump the file to precisely?

quaint jewel
#

Β―_(ツ)_/Β―

#

it should write to serverlog where it dumped the file

safe apex
#

It created a seperate file within the ServerProfile folder. Not as easy to read as hoped, but it does the job haha πŸ˜‰ Thanks!

quaint jewel
#

you can load that file in the clientside ui

#

it has a load button on the bottom which will load from clipboard

#

@fringe salmon steam bugged I guess. Please don't crosspost

#

I guess so yes

uncut trellis
#

could be it moved on to another download

#

just let steam do its thing

robust egret
uncut trellis
#

it might not work since its already doing an animation

robust egret
uncut trellis
#

could be its special

#

as in it forces the stepover animation

#

thats the logical explanation I can come up with

robust egret
fast sable
pine kite
#

Shouldn't you then atleast mention the brand/model of the HOTAS?

#

who knows, there might be known issues with it's software.

safe apex
quaint jewel
#

execute diag_captureFrame on clientside

robust egret
uncut trellis
#

there are other keys too that you cant override

#

or actions

quaint jewel
#

no

robust egret
robust egret
uncut trellis
#

well if it does not work and if the action plays with some other key as shortcut then you just cant

fringe salmon
#

I bought a server on 4players and im having trouble starting it anyone who knows how to use it please dm me.

grim tinsel
#

I recommend explaining your problem here so people can help you

unique frigate
#

Hey, I got some problems with my FPS suddenly stalling and load times being a lot longer than before

#

anyone here know why that could happen?

rocky osprey
#

just lost all of loadouts from the arsenal, any ideas? trying to see if i can recover an older profile from documents

near hollow
#

Any reason why the game drops to 3fps when zooming in on a trigger with a large radius? Bit strange never happened before

fringe salmon
#

im still having issues with this game not allowing me to delete my corrupted account

#

basically from what im experiancing their is a corrupted alternative version of my account and a good one that has my saves

#

but the other account with the good saves are not in files but how do i know that it is their because yesterday when i deleted the corrupted account it went back to the good version with my saves but now i cant delete the corrupted account

soft path
#

hi there, GM for A3Wasteland Trailerpark server.
Just wondering, ever since the Arma 3 update, our players do not have the ability to talk in side chat after switching from independent. The speaker icon is red. Any ideas why?

wise barn
#

not a vanilla issue. ask on the wasteland discord

soft path
wise barn
#

i thought there is one... well then...

soft path
#

however you sound confident it isn't a vanilla issue. I'll get in touch with the creator directly, forgot I had him as a contact.

#

thanks

ocean forge
#

Hiya new to modding Arma 3 and unable to drag Arma 3 reports in chat should I copy and paste it?

steady hawk
#

What is the issue?

ocean forge
#

6:23:50 Unrecognized CfgVehicles simulation ruin in bin\config.bin/CfgVehicles/Land_LightHouse_F/
6:23:50 Cannot create object with abstract type Land_LightHouse_F (scope = private?)
6:23:51 Generating ST on the fly is very slow
6:23:51 ca\misc\garbage_metal.p3d: house, config class missing
2:09:04 Cannot create object with abstract type Land_NAV_Lighthouse2 (scope = private?)
2:09:04 LODShape::Preload: shape 'nst\ns_jbad\mil\ns_jbad_mil_guardhouse.p3d' not found
2:09:04 Warning Message: Cannot open object nst\ns_jbad\mil\ns_jbad_mil_guardhouse.p3d
2:09:00 ca\buildings\dum_mesto_in_open.p3d: house, config class missing

#

Those are the main reoccuring issue people from CUP discord said I should ask about it here πŸ™‚

steady hawk
#

Excuse me, what is the issue?

ocean forge
#

A little confused, are these not issues as in safe to ignore?

#

If so is there a way to debug further why a map will not load or it stutters at 1fps when processor is being overclocked to 6Ghz?

#

Got 2x2080SS in SLI and an extra dedicated to PhysX and 512GB's of RAM via extension tried installing Arma 3 and mods to a RAMDisk after hearing it using my Hard drive so much all the time but no effect besides faster loading, also have the pagefile set to large and installed to a RAMDisk

uncut trellis
#

@ocean forge please explain from the beginning. What is it that you are doing?

ocean forge
#

Oh i'm trying to run DayZ SP using Chernarus Redux map

uncut trellis
#

This is Arma discord. Not dayz

#

And Arma mods are not compatible with dayz SP

ocean forge
#

Modding Arma 3 using the steam workshop

steady hawk
#

Chernarus Redux is for A3 IIRC? The map for DayZ SA is named Chernarus Plus

ocean forge
#

Sorry forgot DayZ was its own game now. I am using Arma for the number of vehicles and other dynamics it has.

steady hawk
#

Excuse me, what exactly you're doing? I don't get anything

uncut trellis
#

This is very confusing.

#

What game are you talking about?

ocean forge
#

Using Steam to run Arma 3 that has a senario to run a version of DayZ for the map Chernarus Redux. All mods and requirements have been downloaded from the Steam Workshop and not sourced from Armaholic or any other website. Arma 3 has been set to use largePage 32 CPUs with HT enabled. Limited to 128GB's of RAM. Left my PC overvolted by 1.65v over night as the author said it would take time for the AI to spawn and the loot but work up in the morning and it was still stuttering and some of the things like cranes were visually broken.

Other things like floating cargo containers where it looked like boats should have been too.

Spent 3-4 hours trying to run out of the city to try and get less things being worked on at once but no luck with that.

#

Another scenario I am interested in won't get past the intro as I believe it seems to have an animated intro which doesn't play well with my mods but I am unsure as to which one.

Really sorry if I got anyone muddled new to the Arma 3 scene.

uncut trellis
#

So you are talking about dayz mod for Arma3?

ocean forge
#

Yep that is correct πŸ™‚

uncut trellis
#

Ok so sounds like you have some complicated mod setup there which is just likely broken.

First make sure your normal game runs properly.

Then test just the map and what it requires.

If that all works then it's the dayz mod stuff that is broken. (which is what I suspect)

ocean forge
#

Tried running with just what the scenario asked for but I was being hit with what I assume to be things being missing.

uncut trellis
#

No

#

Not any scenario

#

First make sure the normal game runs

ocean forge
#

There is a scenario I can launch with all my mods but it starts me with guns, a team and vehicles.

uncut trellis
#

Yes well that is likely the broken thing

ocean forge
#

Anyway to know which mod is breaking what?

uncut trellis
#

Not really

ocean forge
#

Thats my mod list. I would send it via Discord but can't upload here so had to do it via one drive.

#

A few are outdated but I assumed they would be okay as they were just vehicles which was hoping they were there own thing so if they break I could see it in game and get rid of it

uncut trellis
#

That's a long list.

#

But it's not really possible to tell what could be wrong from it

steady hawk
#

A bigger MOD list = A bigger chance of mess

ocean forge
#

The main issue I seem to have is ca\misc\garbage_metal.p3d: house, config missing
and lighthouse one missing too.

At least with the main senario I want to run and its the only error that repeats.

Wondering if any of you would know any mods that add those files. Tried googling the exact text with wildtags but only one result and it wasn't resolved.

steady hawk
#

If a model isn't loaded, it just won't loaded. Not crash

ocean forge
#

Oh it only crashed with one Scenario that has issues with bones and leaves me stuck on a loading screen. Besides that no crashing just repeatedly trying to load that model over and over again.

uncut trellis
#

CA stuff is Arma 2 so likely CUP should have them.
Of course someone could have been doing their own ports. So impossible to say.

ocean forge
#

Many others are getting 3-30 FPS on Redux map so I feel my setup should get higher I've even purposefully suffocated the GPU and CPU as well as I/O to test if one of them was causing too much overhead for the other.

steady hawk
#

No, reduce your MOD list. That's how improve your performance

uncut trellis
#

Are they getting low fps running just the map in editor or running it with some complex and possibly broken modset/scenario

ocean forge
#

Mostly the mods that were requirements the scenario maker seems quite content on the number of items, wreaked cars and things like that down on the ground but his scenario also offers respawning AI zombies, Respawning loot and doesn't mention about trying to escape the island or something like that. Also has support for Ravage and CUP as well as a few other mods I own.

The other scenario that starts me off in a vehicle however gets me an instant 100+ frames on 4K with sampling up and seems to be GPU bottle capped as if I turn sampling to 100% or below FPS massively goes up further.

But no such luck in the other scenario for the more starting with nothing one.

uncut trellis
#

So it's likely just badly made scenario causing the problems.

#

If scenario is published it doesn't mean its good quality.

#

And nothing can really help with that

ocean forge
#

Hmm will try to focus more on what is causing the bone rigging issues then. Thank you very much. Will talk to the CUP Discord again asking about the ported models from Arma 2. I own Arma 2 if its as easy as moving the models into the games folder? I'm guessing its not but worth an ask haha

steady hawk
#

No. You should do a LOT of work

ocean forge
#

Are there video tutorials on how to port assets over from one game to the other game? I only have 4 main errors. 3 are missing model configs and the 4th is bone rigging.

uncut trellis
#

Yeah no it's not very simple like that

ocean forge
#

More then happy to try and put some work in and upload the missing files if it wouldn't be breaching any of Armas copyright or anything like that.

uncut trellis
#

It does not work by just copying some files over.

#

First of all you should test if the redux map has those errors alone.

#

And if you in the end really want to go through adding the objects you would have to set up the modding tools and development environment and use the public release data packs of Arma2 data to set up the new addon with those models in it.

#

And even if you do that I highly doubt it would fix your problem

ocean forge
#

Thank you very much for your time and helping me. Will do that to test it now. I know Redux itself doesn't have bone issues or lag natively but unsure of the error exactly. If Polpox thinks I should try and do it then will try my best to get it working. Would be happy to share the modlist if anyones interested if I do get it working

uncut trellis
#

It's likely just the scenario being bad quality.

#

It sounds like it has million things happening

ocean forge
#

Yeah its great to look at, well if the boats were there too but besides them it looks like a place that's been nuked but some of the wrecked cars feel a bit too wrecked personally. Something that blew up a car would damage terrain and buildings too just hard to find a good redux scenario that I know has vehicles that spawn/respawn and loot as well as AI that respawn. The scenario that gives me the Humvee has a full road of destroyd vehicles as well as helicopters flying over killing all the zombies. Got looting working for both bodies and objects but I am unsure it loot respawns and its a bit too chaotic and feel way too overpowred from the beginning. Want that sort of hard slow grind that makes it feel rewarding after.

hushed raven
#

Anyone know why this isn't loading onto the server? When trying to load the pbo this is the error.
no entry bin for bin/config.bin/cfgworlds.lingor3

grim tinsel
#

missing mod

fringe salmon
#

Anyone ever had an issue with ACRE2 where people will just stop being able to hear you? TS still pics up my mic and I can hear people ingame, but they cant hear me. Only fix is full TS restart

weary sky
#

Seems to be an issue with TeamSpeak. TFAR is similar issues

nimble oracle
#

I've been having an issue where my mods are not automatically updating. Steam seems to recognize that there are updates, but I have to manually right click the mods and hit "repair" for it to actually download the update now. Nothing was changed as far as any settings that I know of, it used to do it automatically. Any ideas?

weary sky
#

If the launcher is running Steam won't download updates. So either close down the launcher and let Steam do its thing, or 'repair' manually in the launcher

fast epoch
#

My friend keeps getting 0xC0000005 - ACCESS_VIOLATION

#

It happens within 5mins of joining a server and playing

wise barn
fringe salmon
#

Hey im trying to host a game for friends, got the UPNP set up and have definitely clicked internet

#

but they cant even see the server

#

like its not in friends

#

if they search for it in internet its not there

#

Any ideas?

vivid shale
#

I've been experiencing a pretty annoying bug that has seemed to persisted even after completely reinstalling the game and using no mods. The fia car list is completely broken in zeus and three of each vehicle are listed and their textures are broken. Any fix to this?

wise barn
#

not an arma issue. mod might be broken

#

did you include all mods to the zeus module?

vivid shale
#

I'm not using any mods, and I am on a vanilla zeus scenario.

#

It's also occurring for a friend of mine, we've both tried reinstalling arma, but nothing seems to fix the issue.

wise barn
#

ah..sorry
i mixed up FIA and IFA

chilly blade
#

anyone know how to fix the problem when you cant open a map while in a vic?

robust wave
#

any idea why arma 3 only uses half of my throttle axis?

stone verge
#

Hello so I have arma 2 operation arrowhead. And so every time I play an Scenario and go to play a save I get this message of: "You cannot play/edit this mission; it is dependent on downloadable content that has been deleted. ca_missions_acr, woodland_acr, bootcamp_acr, mountains_acr" I have the steam version of arrow head since I got it for a sale but I didn't buy the Army of the Czech Republic DLC is there a way I can fix this. Or will I have to spend 10 bucks to get this to work? I am not sure how to go about this because I have been trying to remedy the issue all day. Also I purchased the British Armed forces and PMC DLC separately. Any sort of advice or help would be appreciated. Thanks πŸ™‚

vivid shale
#

So I've deleted everything, documents, steam apps folder, everything. And the bug persist. Have no clue what else I can do.

steady hawk
stone verge
#

Ah I see thanks πŸ˜„

steady hawk
#

...Wait do you have A2:CO or just A2:OA?

stone verge
steady hawk
#

So you have both? Nah never mind my last, you should have everything

stone verge
#

Yea I should But man arma can be confusing I also recently picked up 3 will there be any issues of that sort?

steady hawk
#

More like A2ACR is the issue. That is a some weird stuff

stone verge
#

LOL yes Not sure why. But I got it fixed nwo

#

*now

obtuse bluff
#

Hey after last update I noticed some micro lags while playing koth

#

I used to run profiling

#

And after windows reinstallation cant find beta in the steam library

#

Any one experienced this

naive kraken
#

@brave hawk hello, if you remember some time ago, i described an issue here, he deleted entire arma and all files from computer and downloaded it all again, but now his game crashes every time he tries to connect, so basically he starts the game, finds a server connects and while connecting game crashes, or better say game just exits, no error nothing, game just closes, can you help?

sweet mason
#

I have no game sound at all arma wont show up in the volume mixer

#

It was working fine last night but this morning it has stopped working

uncut trellis
#

Arma uses your default sound device

sweet mason
#

The problem is it's not in the volume mixer at all

uncut trellis
#

is it running?

sweet mason
#

yes

uncut trellis
#

have you tried restarting it?

fringe salmon
#

anyone know why i cant see a pbo file ive been sent?

#

ive put it into my mpmissions folder

#

but cant see it when i go into editor and search for it

grim tinsel
#

which mpmissions folder did you put it inot?

#

also afaik 3den cant open pbo files

fringe salmon
#

into my documents one

grim tinsel
#

ye try unpacking it into a normal file

covert hinge
#

my game keeps "exited in an unusual manner" every like 30+ min

#

google didnt help

grim tinsel
#

make a feedback tracker ticket with your crash dump please @covert hinge

covert hinge
#

how do i do that

thorny solstice
#

Why does steamcmd say that my app is already up to date when i dont have the server in the directory

#

because that directory is empty

quaint chasm
#

Hey all, I’m trying to load into my dedicated server that requires mods and I got stuck on a loading screen after choosing my role, I can hear the game and the environment but I can’t load in nothing on server logs any fixed thanks 😁

ruby kayak
#

got an arma 3 server with some mods on it. cant hear the sounds of the modded guns when someone else shoots it. anyone know why?

grim tinsel
#

make sure that you have the same mods installed @ruby kayak

ruby kayak
#

i have the mods installed. unless its a diffrent one thats almost the same

#

could be that server isnt loading them right. but wouldnt know how to find/fix that

twin fulcrum
#

bin/config.bin/CfgVehicles/UK3CB_B_MH9_Unarmed/AAF/AnimationSources/AddTread/: Cannot find vase class 'AddTread' help arma crashes upon launching

steady hawk
#

Looks like just a bad MOD

twin fulcrum
#

How do I put it...

#

There must be a way to identify the faulty mod, right?

steady hawk
#

UK3CB part of the error suggests

twin fulcrum
#

Nope...

steady hawk
#

Nope what? 3CB is a famous MOD indeed, you should have it. Or, some relevance

fading pulsar
#

The art of war showcase "Cultural Property"
I can't seem to get into it, I only have the option of purchasing, but I've purchased the AoW and restarted my Steam Client. Is this a common issue at the moment or is my Arma being Arma?

steady hawk
#

Did you restarted Arma 3?

fading pulsar
#

Yes, had to in order to restart Steam

steady hawk
#

Do you have the DLC for sure? Can you check via Arma 3 in Steam Library > Properties > DLC?

fading pulsar
#

I can't recall ever having an issue like this, I've purchased all the DLC besides the creator DLCs, I can confirm I see it in the DLCs tab

steady hawk
#

And Purchase history on Steam?

fading pulsar
#

Yep

steady hawk
#

Hmm πŸ€” I didn't have the issue like this, could play the Showcase just normally. Can you launch again and make sure it's happening yet?

fading pulsar
#

I will restart my game and try aagain

#

I still have the "Purchase" button for the showcase

steady hawk
#

Can you verify your game?

fading pulsar
#

I'll do that now

fading pulsar
#

@steady hawk
Hey, that has solved the issue, thanks!

steady hawk
#

slaps the game this game sometimes corrupts itself somehow

fading pulsar
#

Ha yeah, Arma Logic is my usual answer

deft plaza
#

My mods arent downloading

#

it says "ready update qeued"

#

But on steam it says that its complete

#

when I press force download it dosent work and says "it seams that the launcher is waiting for steam" I have restarded my computer twice. What should I do

#

nvm it just update by itself lol

pine kite
torn tartan
#

hello i would love it when someone can help me xD

steady hawk
#

Nobody unfortunately

torn tartan
#

xD

steady hawk
#

That is not a way to ask

quaint jewel
#

explain problem in detail.
Chances are low that someone will say "I'll help you" without knowing at all what you need help with and probably not being able to help with what you turn out to want

torn tartan
#

my ace menu doenst work anymore, my personal arsenal doesn't work and when i go into arma 3 settings they don't appear

quaint jewel
#

CBA loaded?

torn tartan
#

yep

#

so? xD

grim tinsel
#

blobdoggoshruggoogly try loading just one mod and seeing if that works

torn tartan
#

okay

tardy tartan
#

Hey all, I'm at my wits end - we have a mission template for a modded server and when we add a Zeus Game Master module that mission template causes the server to repeatedly reload the mission and never actually starts/allows players to connect.

#

If we remove just that game master module, the mission loads perfectly fine and works as expected.

#

Mission (with GM module) works fine from Eden

grim tinsel
#

take a look at the servers rpt log @tardy tartan

tardy tartan
grim tinsel
#

can you upload the rpt log somewhere and sahre it here?

tardy tartan
#

It's not dumping one - think it might be the hosting provider being dumb

#

I'm just reading strict console output as it comes

grim tinsel
#

it should be producing an rpt log

tardy tartan
# 
17:53:51  Mission file: empty_altis
17:53:51  Mission world: Altis
17:53:51  Mission directory: mpmissions\empty_altis.Altis\
17:53:55 "No params given for ALIVE_fnc_BUS - exiting..."
17:53:55 [CBA] (xeh) INFO: [18371,114.838,0] PreInit started. v3.15.2.201119
17:53:55 [CBA] (settings) INFO: Reading settings from settings file.
17:53:55 [CBA] (settings) INFO: Finished reading settings from settings file.
17:53:55 [CBA] (xeh) WARNING: One or more children of class CAManBase do not support Extended Event Handlers. Fall back to loop.
17:53:55 [ACE] (common) INFO: Parsed Settings Configs [30.0 ms]
Attempt to override final function - ace_interaction_fnc_addpassengersactions
Attempt to override final function - ace_medical_status_fnc_hasstablevitals
Attempt to override final function - ace_dogtags_fnc_cancheckdogtag
Attempt to override final function - ace_dogtags_fnc_getdogtagdata
Attempt to override final function - ace_medical_treatment_fnc_cprlocal
Attempt to override final function - ace_medical_treatment_fnc_fullheallocal
Attempt to override final function - ace_medical_treatment_fnc_treatment
Attempt to override final function - ace_medical_gui_fnc_displaypatientinformation
Attempt to override final function - ace_medical_gui_fnc_updateinjurylist
Attempt to override final function - ace_medical_gui_fnc_updateloglist
17:53:55 [CBA] (xeh) INFO: [18371,115.3,0] PreInit finished.
17:53:55 Warning Message: No entry 'bin\config.bin/CfgPatches.usp_gear_core'.
17:53:55 Warning Message: No entry '.units'.
17:53:55 No entry 'bin\config.bin/CfgPatches.usp_gear_core'.
17:53:55 EPE manager release (0|26|0)
17:53:56 Mission empty_altis.Altis read from directory.
17:53:56 Roles assigned.
17:53:56 Reading mission ...
17:53:56 Starting mission:
17:53:56  Mission file: empty_altis
17:53:56  Mission world: Altis
17:53:56  Mission directory: mpmissions\empty_altis.Altis\
#

No rpt logs in the root dir of server

#

Just verified the install

grim tinsel
#

should be in the folder that the profile is in iirc? dunno might be wrong, ask the wiki

tardy tartan
#

Got it - will pastebin 2s

#

uh

#

18:02:14 Warning Message: You cannot play/edit this mission; it is dependent on downloadable content that has been deleted. a3_characters_f

#

Any protips?

grim tinsel
#

that can be ignored afaik

tardy tartan
#

(Linux servers don't seem to generate RPTs natively)

#

it just dumps to STOUT and STERR

#

unsure how I can get it out of this hosting panel without having access to the box itself

lyric bramble
#

Hey i have a problem: Everytime i open something in a mission that has a loading screen (virtual arsenal for example) the loading screen opens and it gets stuck and doesnt load and the only way to get out is to ALT+F4. It happens with and without mods, on the mainbranch aswell as on the Creator DLC branch. After a reinstall it still happens

simple flint
#

Hi all. Wondering if you could help me with this one.
I cannot change any keybindings in arma. When i exit the controls section the configuration resets to default. Demonstrated in the following short video: https://z.zz.ht/iZkya.mp4
Troubleshooting steps taken:
-Trying a new arma profile
-Checking if the profile attributes are on Read-Only = box is unchecked.
-A fresh install of arma

grim tinsel
simple flint
#

@grim tinsel If its a known bug, might there be a known fix for it?

grim tinsel
#

Not sure, maybe @mental river knows

uncut trellis
#

do you use oneDrive for saving windows user data?

mental river
# simple flint <@!159639570638438401> If its a known bug, might there be a known fix for it?

It's a recent bug (happening since last update). I think it is either being fixed or already fixed.
Anyway, at the time the only way to change them is editing your arma profile settings manually (using text editors like notepad++)
Unfortunately since you're dealing with numbers you'll need some sort of reference to understand what they are. You can either read them in game (e.g if you want X find an action that uses the X key and then read the value from the file) or use DIK codes.

simple flint
solemn delta
quaint jewel
simple flint
solemn delta
opal elm
#

Got a weird one, for some reason when people switch to a laser designator, they're unable to swap to any other weapon until they drop it. Has anyone experienced this before?

fringe salmon
#

Trying to host a server on host havoc, have all mods loaded correctly however in missions there are no slots available for anyone to take

#

Vanilla missions work fine

#

This is the rpt file

uncut trellis
#

is it your own mission @fringe salmon

fringe salmon
#

Yh the mission itself has been loaded ok

#

It was working fine last week

uncut trellis
#

I suppose you could try merging it with empty scenario and resaving

fringe salmon
#

Its weird, it does it on every scenario that involves workshop stuff but all vanilla ones are fine

uncut trellis
#

if it for some reason errors with the characters_f it may mean it does not load any characters

#

so theres no characters to start in

fringe salmon
uncut trellis
#

probably it is possible

#

I dont run server myself so dont know the details

limber spire
#

im having quite a few issues on my nitrado server at first it was "createpeer failed" which got fixed but took a week now i am having a bunch of errors which i don't understand

#

this is what is showing up 11:47:15 Warning Message: You cannot play/edit this mission; it is dependent on downloadable content that has been deleted.a3_characters_f

11:47:18 Warning: looped for animation: a3\anims_f_epa\data\anim\sdr\cts\hubcleaned\briefing\hubbriefing_loop.rtm differs (looped now 0)! MoveName: hubbriefing_ext
11:47:18 Warning: looped for animation: a3\anims_f_epa\data\anim\sdr\cts\hubcleaned\spectator\hubspectator_stand.rtm differs (looped now 1)! MoveName: hubspectator_stand_contact

11:56:31 Mission test.Altis: Missing 'description.ext::Header'

11:56:32 Missing addons detected:
11:56:32 ace_cargo

11:56:32 Warning Message: You cannot play/edit this mission; it is dependent on downloadable content that has been deleted.ace_cargo

grim tinsel
limber spire
#

Yeah im certain that it is

#

or i have definitely tried

#

Launcher i am certain on the server im not sure because it is different but i have tried

lyric bramble
#

I think i found a bug. After doing a clean install i think i can reproduce it. Open the editor and place a soldier give him zeus access now start the mission as multiplayer, open zeus place an ai soldier and put the arsenal thingy on him and you will see that it works now do the same thing but start the game as singleplayer and the game locks up (atleast for me)

quaint jewel
brave hawk
lyric bramble
#

i tried it on the main branch and the Creator DLC branch and after the clean install ive only tested it on the Creator DLC branch

hidden cloak
#

Has anybody encountered an issue where

A.) Player is stuck inside of a vehicle
or
B.) If player exits vehicle, other players still see them inside

cunning nacelle
#

I'm having an issue where pressing backspace in zeus hides the interface but no object icons. It appears to only occur in MP. The same CBA settings are shared across both SP and MP. Any ideas what may cause this? I thought it was CBA settings until I tested in SP and was unable to reproduce.

The only mods I'm aware of that interact with zeus are Ace, AceX, ACRE and Zen.

pine fjord
#

When I join a sandbox server I always get kicked after a minute with the error battleye query timeout

#

Already deleted the battleye folder in the Arma 3 folder and redownloaded through steam. any fix?

fresh quest
pine fjord
#

thanks for your help!

fresh quest
#

It seems to be a very specific issue, usually only when you are alone on the server

fringe salmon
#

I have a little issue, my cursor is showed on screen but selects something a few centimetres right of it... anyone knows how to fix it?

fresh quest
#

just curios , do you have windows scaling active (you find it at the Settings for Display)

mild sail
#

can i report bugs here with mods?

#

RHS US army M136 riflemen are the only AI in the game that can use the AT4 correctly, that is to say, they will use it at all

#

been experimenting with other RHS units, other modded units, vanilla units, if you give them an AT4 through the virtual arsenal none of them even acknowledge it's there

#

you can even take the at4 away from the m136 rifleman, give it back through the virtual arsenal and they don't use it

#

my thinking is there's a script run on the m136 riflemen when they spawn

#

dunno where i could find it to replicate it though

pine kite
#

Mod issues are supposed to be reported on the site/discord/workshop pages of said mod creator. Usually it is not an issue in the Arma 3 base game. RHS has a site of their own, as well as a workshop page. Discord I don't know but they may have another kind of social media place.

mild sail
#

alright

pine kite
#

Also, I haven't used an AT4 in vanila. So it must be something RHS provides.

fleet geyser
#

Does anyone know what causes this issue with trees? Ignore the fact that this is a CUP map, it happens everywhere

#

I have a Ryzen 5600X with 16GB DDR4-3200, an SSD and a RTX 2060. This cannot be a case of hardware not up to snuff

#

This only happens when I look through a scope. When I zoom in normally, it's fine

fringe salmon
#

So i have been using Alive orbat creator to make 2 factions but when i use them its no factions or only 1

echo void
#

hey, I'm having a problem with the object builder, I get the "unable to create viewer" error for some reason, tried everything nothing fixed it

steady hawk
#

Because you didn't mounted P or Buldozer not available there?

echo void
#

p is mounted

#

did a clean reinstall too

steady hawk
#

Make sure buldozer.exe's there

echo void
#

it is

steady hawk
#

Then the argument in OB is wrong or something?

echo void
#

what argument?

#

the params for the location?

#

P:\buldozer.exe -buldozer -window -noLand

steady hawk
#

Try
P:\buldozer.exe -buldozer -name=Buldozer -window -noLand -exThreads=0 -noLogs -noAsserts -cfg=buldozer.cfg

echo void
#

still the same

steady hawk
#

Couldn't launch by your argument so no idea then

echo void
#

hm

#

weird

twin fulcrum
#

Does usp have discord

#

Under Siege productions

#

Pls

uncut trellis
#

have you checked their homepage?

agile cloud
#

hello, im having an issue where i can no longer see who drew lines or placed icons on the map when i hover my cursor over it. before, when i hovered my cursor over the line or marker it would say the name of the person who placed it.

at first, i thought it was just somoene who was no longer on the server, but i checked by drawing my own lines and i could not see my own name when hovering over my line. I cannot find any solutions on google, nor can i find anyone who has had the same issues with me. I am hoping to see if i can find a solution here!

buoyant rose
#

im having trouble with my server, ace, ace compats, and CBA, updated today and now i get code z/ace/addons/medical_engine/script_macros_medical.hpp not found. nothing on the ACE page. any ideas?

grim tinsel
fast pivot
#

My friend and I keep running into an issue where our screens randomly become blurry and slowly grey out. We're playing with ACE and I'm almost certain it's causing it but we have no idea how to fix it. Anyone know what this would be? It has nothing to do with our graphical settings, we've tried.

#

Desperate for a solution because it causes the game to become unplayable and we can't find a fix anywhere. Thanks

gusty snow
#

@fast pivot No crossposting. I'd recommend you put the question in here,and remove the one from #arma3_questions

quaint jewel
quaint jewel
agile cloud
quaint jewel
#

Don't have time now.
it could be, I will need to test that.
Can you see if you can reproduce it when you host your own local server (ingame multiplayer, host server) and draw marker lines on the map?
Also when you place markers there

wise barn
#

wait...
if someone got an answer to your issue, he/she will respond

agile cloud
#

switching back to regular version fixed it

#

idk if it was the profiling branch or something wrong with my install of it

quaint jewel
#

Its probably profiling branch. Would save me quite some time if you can tell me if its reproducible

pine fjord
#

hello everyone, for some reason I only get like 40 fps in Arma today. both my cpu and GPU are only at 35%. I have a ryzen 5 3600 and a 3060 ti and play at 1440p

#

any settings I need to change to get at least 80 fps? it only happens in arma

long onyx
#

Hi all. Does anyone have any advice on server hosting?. I have forwarded my ports and stil cannot host a game. I have previously hosted games with no issues but it has become a problem without changing any settings

fresh quest
agile cloud
fringe salmon
#

i think ace has just had an update and i think it screwed itself. the arsenal module isnt popping up on my server, and yes i have it set to all official and unofficial addons, anyone help?

cerulean lance
#

Unable to kill the Arma process, says:
Access is denied.
Game's stuck on a loading screen for an MP Server.
5 Mods loaded, RHS + JSRS.

Any solutions?
Only thing I can do at this point is hit the reboot switch, but that doesn't solve the problem.

hoary jetty
#

Does anyone know how to stop making objects look like they combine, at long ranges?

#

Wish I could put a pic in here, would be really useful

#

Does it on all maps

steady hawk
#

IDK what you wanted to show. Is it a Z-fighting? If so, no luck. Also F12 is your friend

slow abyss
#

Lowering the view distance, object and terrain detail settings might alleviate the z fighting a bit. But there's no way to get rid of it completely

stone verge
#

Ye z fighting is the overlapping of game models so I agree. Though if it’s an scaling issue is what it seems like to me. Or a bug with the mod

quaint jewel
quaint jewel
#

@agile cloud Thank you, I found the issue, will be fixing for next week

plucky citrus
#

I need a hand with 3den if anyone knows how I can fix the issue with my script, or tell me what channel I should be asking in?

grim tinsel
plucky citrus
tough loom
#

hey guys im trying to host a mission but its being fucky

#

i edited a KP liberation PBO and im trying to play it but it just makes the background some mist

#

and doesnt start the mission

#

all i edited was the config

#

its probably not a scripting issue but a me-not-knowing-how-to-host issue

fringe salmon
#

The battleeye dksent work

#

DM me pls. I need help

wise barn
tough loom
#

i changed the team presets

#

changed a 17 into a 4 thats it

#

maybe its supposed to be an 04?

wise barn
#

idk. i have no clue how liberation is set up
load up an unedited version in eden, play it in multiplyer mode, just to verify that your source is fine

#

next, make a backup of the original and do your edits, retry

wise crow
#

I'm having some issues with my server, so I have some people who are able to view it and others who cannot, everyone has their mods ect. set up correctly, but for the minority that cant connect I'm not too sure whats causing it

pine kite
#

server issues should be addressed in #server_admins , #server_linux or #server_windows . As for your friends, can they join other servers at all, or only your's not? If their internet service provider has them on a dual-stack light connection (they should ask the ISP if that is the case) then they do not get a proper IPv4 address that is routeable across the internet. So responses of the server do not reach them. Arma 3 cannot handle IPv6 addressing.

gusty snow
#

Hello. For the past few day's ever since update 2.02 came out, whenever I attempt to tab back into ArmA (after tabbing out), it sometimes shows a black screen with only the cursor. No matter what I do, I cannot close the game. The only fix is to Restart my PC. Any solutions?

wise barn
#

run arma in fullscreen window mode

gusty snow
#

I'll try that out and see if it works,thanks

#

It works,thank you!

slim mortar
#

is this the place if i have issues with arma?

wise barn
#

jup

slim mortar
#

nice. than my issue is, that arma 3 keeps crashin after i've loaded in a server. Mostly happens after i pick a role after 2-5 min

wise barn
#

try a vanila server

#

like, any official arma 3 server

slim mortar
#

crashed

wise barn
#

what's the error message?

slim mortar
#

None

wise barn
#

impossibru

#

set your game to fullscreen windowed mode

slim mortar
#

it is currently

#

now somehow it works

wooden oar
#

Can someone help?everytime I laugh into a server like king of the hill the game just went to a small screen on the top left hand on my screen instead of full screen

#

and I always get kicked out due to some weird reaons like battleeyes selpof idk how it is

steady hawk
#

Write your error precisely

wooden oar
#

It just won't go full screen when I laugh the game

#

I tried to press alt+enter but did nothing

steady hawk
#

Check your video settings

wooden oar
#

ah alright got it

#

yep got it fixed,somehow it was on window,anyway thx

slim mortar
#

after redowloading arma, my game still crashed after joining a server

slim mortar
#

i think i need to screenshare to really show what happens

sleek sandal
#

ok so i have a weird problem... I made a mission and tested on both dedicated and local host that kicks everyone out but me. the player's game just crashes. I have no clue what it is. What could cause that? It doesn't crash the dedicated server, it just kicks the players out besides me

wise barn
#

if i had to guess, mod mismatch

sleek sandal
#

i don't see how since everything on my end and players end is downloaded with steam

wise barn
#

check the RPT files

sleek sandal
#

i did but i didn't see anything that i understand to make them crash

#

any chance you could have a look at the RPT?

wise barn
#

upload latest server RPT to pastebin

sleek sandal
#

can i post the link here?

wise barn
#

yes

sleek sandal
#

the player that crashed in that file joined at the 2605 line

#

only thing there is Ctab but i turned it off and still got crashes

wise barn
#

nothing out of the ordinary for me either

sleek sandal
#

Thank, im going to try and rebuild the mission to see what happens

wise barn
#

start simple

#

use a vanilla mission to confirm everyone can join

#

move on from there

#

like

#

create a new map an just place down some units and run your mods

#

let them try again

sleek sandal
#

i will try that. I tried having only essential mods on the mission (CUP, ACE, CBA, etc) and i got no crashed, turned on ACRE and crashed, i thought i was golden but nope, turned it off and crashed. Its just weird

#

thx for the help

echo void
#

anyone had a problem with "unable to create viewer" on object builder?

#

reinstalled a3 tools and buldozer and extracted data again like 3 times but still nothing

blissful bramble
#

How are you launching object builder?

echo void
#

through arma 3 tools ran from installation directory, not from steam directly

#

but ye, I tried running it in all ways possible still the same issue

blissful bramble
#

So by clicking the .exe in the folder or from the Arma 3 tools app panel?

echo void
#

tried both ways same results

blissful bramble
#

Oki well my suggestion was going to be to launch it from the .exe or via .p3d file association with one of the sample models. The only time I experienced the problem was with running it from Steam or the tools dashboard

echo void
#

I also made a shortcut in the P drive thinking it would resolve the issue but it didn't, I'm gonna try running it with .p3d and see what happens

#

nah

#

still the same

gloomy escarp
#

I port forwarded with 2302 and enabled dmz and my friend still can't join my hosted server (not dedicated), what am I doing wrong?

#

the invite friend option isn't available via steam either, but he can join via direct connect

hexed crane
uncut trellis
#

the mission file seems to be broken

hexed crane
#

F that sticks no idea what did it we saved it last night fine loaded today and busted

cursive mist
#

can't move wheeled vehicles at random times

#

and I don't know what causes it, anyone ever experienced this too?

woeful mortar
#

im trying to send a picture but it wont let me

#

like i said earlier i get an error code every single time i try launching the game it says bad image ive updated drivers, tried reinstalling the game, scanned for viruses, everything, nothing works, its only arma 3 to other games like tarkov run just fine

grim tinsel
woeful mortar
#

Please help I don't know what to do if you click the link above I get that every single time I try starting and running arma 3.

steady hawk
woeful mortar
#

@steady hawk So to delete and reinstall directx and microsoft visual should I just reset my pc so it deletes and resinstalls windows and just keep my files?

steady hawk
woeful mortar
#

because I can't seem to figure out another way all the youtube tutorials are of a 13 year old kid with dubstep intros or a robot voice with more dislikes than likes

steady hawk
#

Better try at least one suggested solution there

#

Are they even???

woeful mortar
#

Yes

#

Look up right now how to reinstall directx and microsoft visual and youll see what i mean

#

its a bunch of dubstep intro videos from like 5 years ago

#

im to dumb for this shit man

steady hawk
#

Why you're watching a YouTube video that describes nothing but garbage? I sent you the link

woeful mortar
#

yes you sent me the link but the link just tells me what i need to do not how to do it

#

im not blaming you its not your fault i appreciate the help ig im just venting

steady hawk
#

This is not a place to vent but to solve

woeful mortar
#

it sucks because I just threw over a thousand dollars into this pc and i cant even play what i wanted to

steady hawk
#

If you can't figure out even the first solution (verify one), you're out of luck

woeful mortar
#

sorry

#

yes i updated my drivers and graphics card already and already verified the game cache and files on steam

#

that was the easy part

steady hawk
#

That's what you should post before you rant

quaint jewel
#

Maybe something spamming setGroupOwner for a group/object that doesn't exist anymore on the server

harsh fractal
#

I have been having an issue while flying helicopters. Any time I access an ACE menu while in the air the helicopter I’m flying goes full collective down and loses any sort of control input I am applying. I fly with the Thrustmaster T16000M set (joystick, throttle, pedals). I am unsure if this is an issue with ACE itself or something else. Would anyone have any insight as to what this could be?

wise barn
cobalt iris
#

I have been having issues with my dedicated server when I attempt to run custom missions that I create via 3d editor. I place the PBO file in the server configuration where it's supposed to go but I get this message

"1:38:32 Steam AppId from steam_appid.txt: 107410 1:38:33 Connected to Steam servers 11:06:08 Can't find a mission collection / mission with template name: 'Tanoa%20Campaign.Tanoa', skipping to next mission. - this one sticks out- 11:06:09 BEServer: registering a new player #108316910"

I run my server through serverblend. I have attempted to ask them but they aren't sure how else to help. What could be causing that message? And what can I do to fix it?

fringe salmon
#

Anyone know why I would have constant spam protection error mΓ©nages from teamspeak while using task force or acre?

I’ve changed the virtual server settings and set up ignore anti flood as a permission in a server group but still constant error messages.

I also have guys being muted in game so we can’t always hear each other

#

Really frustrating hoping someone can shed some light on this besides what I’ve already tried

quaint jewel
#

disable spam protection

#

if you set it as permission and it doesn't work, then you didn't set it correctly

#

you can also disable it for a whole channel in channel permissions

fringe salmon
#

Okay I have it disabled for the whole channel now

#

sorry I am a bit of a Teamspeak permissions noob

#

so I have ignore anti-flood measurements, value skip and negate grant

#

which ones should be checked and what should the value be for the server group permission?

quaint jewel
#

Value checkbox Set, no skip, no grant

fringe salmon
wintry vine
#

I'm having problems locking on to targets using the Titan/PCML. I'm looking at a vehicle and hitting T, but... it's not locking. Their engines are running and stuff too, but I don't get the locking dialog nor the tones. I do get the range to the target, but no lock. Can someone help me figure this out?

#

https://imgur.com/a/hTqKsoo - here's what I see. With the Titan, the unlocked diamond shows up, but nothing happens when I hit T. If I go into zoomed-in view and hit T, I can see the range, but that's it.

#

(I checked my keybindings and all the locking-stuff is set for T as well.)

wintry vine
#

^ any ideas? πŸ™‚

gentle charm
#

alright
Having some issues with Eden editor
Not able to export any missions to multiplayer
says it exports it but never actually chucks it into the multiplayer folder

anyone got a clue how to solve that?

grim tinsel
gentle charm
#

mpmissions under documents>arma3 other profiles

grim tinsel
#

iirc it drops it in your game files -> mpmissions

gentle charm
#

yea
it’s in there now
saved as into the Mpmissions ingame
Just clicking export to multiplayer seems to not work with it for some reason

grim tinsel
#

did you check that mpmissions folder?

#

as in the one thats in the same folder as the arma 3 exe

gentle charm
#

Yes
Yes I did
Always empty

grim tinsel
#

thats odd

gentle charm
#

Yep
But it seems to be working as it should rn with what I did so yeaa

formal zephyr
#

Does anyone know what to do?

#

I've tried to fix it with the help of youtube video's and it hasn't worked.

quaint jewel
#

Do what it says in that message

#

report it to the feedback tracker

#

and attach that report that the "prepare report" button gives you

formal zephyr
#

Alright

wintry vine
#

any help would be greatly appreciated!!!

fresh quest
#

how long was the vehicle running?

#

iirc the IR locks need the vehicle to be warm enough, not sure if it was enough

wintry vine
#

Multiple minutes @fresh quest , with both cars, tanks, and helicopters

#

I tried it with the Stinger and Igla from CUP too, no dice...

#

I tried it with the Stinger and Igla from CUP too, no dice...

fresh quest
#

there was some AI setting that made that happen, did you change any of them?

#

iirc diableAI was that

wintry vine
#

Ooh it might be my mods, because I loaded with no mods and I didn't have that problem

wintry vine
fresh quest
#

ace by chance?

wintry vine
#

actually no, I don't use ACE

#

it's probably something CUP-related as far as I can tell

fresh quest
wintry vine
#

Yeah, that's what I'm doing right now πŸ™‚

wintry vine
#

Ah, I figured out the problem!

#

Apparently, GGE Core/GGE Swap messes with locking on to stuff. Weird, eh?

cunning grotto
#

Anyone know how to change which monitor the game displays on?

wise barn
#

video settings > display mode: window > set res lower than your screen > drag the game to the other screen > video settings > display mode: full screen window

proven trellis
#

Everytime i try to open the game it says cloudprovider not runningproperly what do i do

wise barn
#

uninstall onedrive if you don't use it

proven trellis
#

what is one drive

wise barn
#

some crappy windows cloud service. comes with win10

proven trellis
#

how ill that fix the issue becuse it is part of the cloud is that why

wise barn
#

because onedrive πŸ¦† with permissions of your documents folder