#troubleshooting
1 messages ยท Page 169 of 1
Are you running Smooth Motion ontop of that?
Like, the driver level framegen?
Panel, app and inspector tell me frame gen is off
Framegen model and Smooth motion are different settings, just asking, because confusion.
I mean this is better than before when it was shitting out 400-600fps and deep frying my gpu
Then I don't know. I'll check
Smooth motion is on. But if it is also frame gen, why is there two settings?
Smooth Motion is the driver level framegen for games that do not have framegen
turn that off and the framecap should work
Latency should get better by a toooon too
Smooth motion is... while technically nice, a headache
I never really noticed a latency issue. Turing this off shouldn't redeppfry my gpu, right? Like I'm almost certain it sustained thermal damage from the 600fps and I'm very worried
With the dropdown thing you can change the AI-Model that is using for Framegen, to override what the game (if it has any) ships with.
Smooth Motion is just added Framegen from outside the game.
Well, set the game to 60 and don't use frame gen and youre gonna use less power than what it does now.
If you're gonna set it to 120 the GPU will go full tilt to hit the 120 without the AI Assisted Frames
So depending on what you're trying to accomplish
Your GPU won't kill itself over a game tho
It throttles when it gets too hot on its own. All the way down to a complete shutdown.
My leg brushed against my glass side panel and I received a 1st degree burn from the heat during the deep frying episode
What GPU do you have, anyways?
asus rog 4090 oc
Oh yeah, my Glass side panel gets really hot too
I currently run a 5090 and I just have the game locked to 60fps because it's not worth pushing my GPU to the max tbh.
temps are in the lower 60ยฐC range for me
Like I just want smooth gameplay because choppiness really hurts my eyes and ends my day with a massive headache
Also, hold on, when did Nvidia release smooth motion for the 40 cards? I thought that is 50 series only ๐
Do you have a G-Sync Compatible display? Then its pretty easy to setup the framerate accordingly
Idk. I just clicked optimize in the nvidia app because the game was turbo choppy and I couldn't seem to fix it. I'm not knowledge on optimization stuff. I have a 4k Samsung Odyssey G8 monitor
yeah that one should be capable of VRR
make sure you set that up correctly.
If you have it running gsync/freesync you can just set a game to 60fps and it will run at 120/240Hz no problem
Woah hold on. I just turned on VVR in the monitor's button menu and everything is so much brighter and vibrant what the hell
My nvidia thing says g-sync is globally set to "on". Did I just need to turn on VVR and that's it?
Maybe?
I have no idea but VRR is the greatest monitor tech since like forever. I could never go back.
Do you know what VRR actually does?
Based on context clues I assume it varies the refresh rate?
It syncs the refresh rate (Hz) of your monitor to your GPUs FPS output. So yeah. Basically.
No tearing, no vsync issue, no framerate related stuttering
Unless you get below minimum refresh. But when you have a high refresh monitor it will kick in lfc (low framerate compensation) and double up the refresh over your fps to avoid the stutters/tears
Like 40fps will run at 80Hz
I think the lower bounds are in the 40 to 50 range for most VRR displays these days
And if you got a 240Hz Display it will just do 40fps >80 >160 and display the same frame over multiple refreshes
Looks a lot smoother even tho it isnt technically
Gonna be honest, with smooth motion off the choppiness is too extreme for me. I may just leave that on now that I can actually cap it to prevent 600fps oven level heat
I play with two friends. One of them starts the world, and we join in. Lately, itโs been happening more often that my other friend just canโt climb ladders or grates. The only way to fix it is for him to log out and restart the game. Is this a known bug?
I get one where one of us can't interact with anything (user interactions close to interactable items). May also affect climbing.
Does anyone what other control the summoning staff shares to set the NPC range? I don't think I have a key bound to that, so I cannot set their range
So, what keybind is used to control that?
why does my bf has to do all of the missions again after he discovered he doesn't have some of them done? like these I have finished but he didn't get. and many more
A lot of (all of?) the character customization unlocks are tied to the character, not to the world, so it's more "if you do the unlock on that character you have the unlock in any world you visit" but conversely "if someone else in your world does the unlock on their own character, that's nice, doesn't affect you, go repeat it for yourself".
How do I fix quest glitches , Iโve restarted my world a couple times now and it keeps saying that I need to do the something even though I did it
Hey, do anyone else have this UI blurry icon problem?
Im playing at 4k DLAA. I have already tryied everything from window mode, DLSS Quality, forcing shader reload, etc. It also happens with icons in my inventory.
So confused. I placed Gabrielle, and I think she gave me a quest (at least her menu prompt had something I opened dialogue for) and it had a craft menu option too. Yet I see no quest for her in journal, and when I talk to her again, it looks like it starts to zoom to open a menu, but then zooms back out and does nothing. Is she broken/am I missing something?
And Hugo does the same thing.
I mean actually troubleshooting the mini dump is helpful too ๐
Install WinDbg (Classic)
Set the public symbols path to download Microsoft's public symbols (there are tutorials online)
Load the dump
Run !analyze -v
It'll at least tell you what the last component in the call stack that led to the crash was - could be for instance realtek.sys
Pretty sure there are also websites that you can upload dumps too, which is generally fine/safe for application dumps (less so for full memory dumps which can contain stuff like credentials or PII)
Does it happen if you turn off dlss/dlaa? If yes it's probably not related to those
why isn't it unlocking for both? it is weird and tiring to do all of the things all over again
Okay i need help with this taskbar thing cause its getting me killed and ruining the game for me ....
Problem: When i move my Mouse (while tabbed into the game) downwards and the System mousepointer reaches some parts of the taskbar it opens the taskbar and whe ni click i dont click in the game but on the taskbar 8and sometimes open stuff thats on it by accident) ...
That makes it so i cant attack anymore cause i click on the taskabr and not in the game .. and after i click i cant move anymore cause the game is now not the "active window" anymore
What i Tried: Closing the taskbar in the System settings, so it is always small - didnt help cause when i move down it jsut opens it cause im hovering over the lowest border | Check if any other programms are interfering - there are no other programs or anything thats running besides the game that would interact with it in any way .. no Overlay or other stuff | Tabbing in and out again - Doesnt work at all .. i cant even tab out normally cause the game is in fullscreen and i have to pause the game with ESC first
And i rather not move my Taskbar to the top or some other wild stuff just cause of this game ๐ข
When i put it in "window" mode . .the mouse doesnt move out of the Enshrouded.Exe Window ...
Can anyone help with the enshrouded tool fix, I have run it so many times and theres a ton of red text but I don't know what any of it means.
What is the text saying?
Get-Content : Cannot find path 'C:\WINDOWS\system32\VulkanDriverName' because it does not exist.
thats the first line\
Does it return any lines that seem successful or is it all errors?
I keep getting the mini dump right on start up, Im assuming this is the cause. This only started happening when I had to rollback my driver version to play Subnautica 2. I have of course fully updat it again but now I have this issue
Yes some are successful
It also says the Vulkan API layer is out of date
Did you try doing a clean driver reinstall with DDU? There's instructions for that in the /minidump command
Your GPU drivers as well?
Yes
Can you get me your dxdiag file, your enshrouded.log file, and your most recent crash dump file? Here's instructions on how to find those files: https://enshrouded.zendesk.com/hc/en-us/articles/9767167725853-Reporting-Bugs
The crash dumps are in the "crash_dumps" folder in there.
We'll take a look at your log to see if it can give us some hints on what is going wrong
You can send them in my DMs here on discord if you don't want to share them in this channel, though they don't really contain any private info or anything
I put in a bug report just now... but has anyone else's game been not letting them loot bodies or open chests? I'll go to interact with it and my UI will flash, then the chest will close without letting me loot it, same with enemy corpses.
hello guys me and my friend keep having issues with the game we created server to play together but for some reason after some time playing it keeps disconnecting us and says lost connection to the server even though we dont have any issues with internet
Well, maybe third time will be charm for me in these channels. Anyone ever hear of issues with seeing your sky turn green? Never happened before until today after playing a couple months, roughly.
This is my first time hearing about that. When does it happen? How long does it last?
It is happening right now. I am building on a mountain/plateau in Nomad, the sky is obviously getting a bit foggy on one side. But instead of seeing fog color, the area that seemingly would be "foggy" it is a distinct green color. Like green screen color. It shifts a little as I turn camera.
Wildest thing I have ever seen. Like misinterpreting the fog color etc.
Also happening where clouds are.
For a few moments there, I thought a plague or something was coming.
And happy to share screencap if anyone would like.
Anyway, let me know where to paste screenshot. Not sure what to do. Second of only two real problems I have had with game in a month or two of use (new player here.)
First problem was never answered so ๐คทโโ๏ธ
No, the problem does not seem to solve even using different screen settings
Then it's not related to dlss/dlaa
submit a bug report
You can just post screenshots here? The channel is full of em
ah ok
I always like to check since differ servers have differ rules about images.
Anyway, caught two of them:
I did manage to fix it....I logged to menu and back and seems gone.
More so wondering if anyone ever saw this issue before ๐
Sorry, I am getting ready to leave for a week and don't have too much time to help, but I have also never heard of anyone else having an issue like this. It doesn't mean it hasn't happened, mind you, but I can't recall anything like it.
That screenshot is a rain cloud/rain. The weather doeesn't seem to be static with logging in/out so it might be gone permanantly or it may be that the rain went away.
It's possible it's a bad shader or something with the driver causing it - as that's usually what causes weird things like this.
I would suggest first turning off your "shader pre-caching" in steams settings -> downloads then running the toolfix to clear out your shaders to recompile them.
If that doesn't work, I would suggest updating your GPU driver or, if it's already updated, using DDU to reinstall a clean version of the driver.
Enshrouded Toolfix:
- Type
Powershellin your window's search bar - Right click on the "Windows Powershell" program that comes up and click "Run as Administrator"
- Type the following command in the window that pops up:
irm "https://raw.githubusercontent.com/LiaNdrY/Enshrouded-Tool-Fix/main/Enshrouded_Tool_Fix.ps1" | iex - Restart your computer after it's complete.
I will copy and paste that to text file if I see it again. It is the first time I have seen it since I started playing. (Less than a month but for some reason I thought it was longer. lol)
Thanks!
It's possible it was a one-off glitch as well. Keep an eye on the horizon, if you see normal rain clouds from here on out, it may have just been something that wasn't loaded fast enough or correctly during that play session.
Yah hopefully a fluke
While I have you or anyone else...does Gabrielle npc have a craft menu or quests at all? She might be glitched for me. Was first question here last night.
it should look something like this (sorry had to run off and find a random someone's screenshot)
Yah I had been logged in quite awhile...so it might have been memory glitch or some such. Possible the relog refreshed something like a cache. It does look normal now...even the rain cloud.
Nice build...love that floor and falls. ๐
Any idea about Gabrielle?
Gabrielle?
Also, not my build. I just pulled the first screenshot from google that had the cloud I was looking for ๐
Yah, I summoned the npc and she had menu with craft option as well as something that looked like a quest. I spoke to her, and the hit E again to get the craft menu. It started to zoom and zoomed back and never opened. It keeps doing that. I tried various recc fixes (repositioning, larger area around, making sure roof, etc etc) and even relogging and reloading and all. She still does the same thing with no menu open. I see no quest in journal.
So I am wondering if she does craft anything, and if she does have a quest, or if that happens because she has not had stuff added to her.
If you or anyone knows what is up with her, or if it is just me etc.
Oh and tried wiki and it has little to no info about her
Gabrielle is a "Villager" NPC. she doesn't craft anything, and I don't believe she has any quests, but it's been a while since I got her, so I can't say for certain. It may have just been a prompt for a "thank you" dialogue.
but... for some reason when she is missing a bed, she does show a "craft" option, which looks like a bug.
Ah ok. Yah I wish I could recall what she said. I was in middle of a couple things so I did not pay attention. Her and one other guy does the same thing. They bounce you back and don't open anything or do anything. Though the craft option did appear the first time I spoke to them, then vanished.
@timber heron might wanna let them know about this:
Now I wish I had not summoned them yet. Not enough room in the base for npcs that don't have purpose. Hope they get one like dupe of craft tasks from others
hey guys i have question why i have so low fps when i have rtx 3060 and amd ryzen 7 game doesnt work good i only have 30 fps on balanced
There are secondary NPCs that have duplicate crafts of the others, called "assistants"
Ah ok, well I thought these two were the assistants. So they are just flavor then?
For the most part, yeah.
Some of them have quests, but not a lot.
Ah ok, good to know.
Is there a good place on discord, or even their site to offer feedback? Because I really wish we had an option to put npcs away. ๐
What resolution are you running the game in?
What is Feature Upvote?
- It is a site where players can make suggestions for the game and upvote other suggestions for a chance to get them implemented.
- Please search for your suggestion before submitting to avoid duplicates.
Suggestions may be open/closed at any time to review backlogs.
- Upvote suggestions you like to increase their chances of being implemented.
Enshrouded Feature Upvote: Click Here
Please keep suggestions to one per ticket, we will delete any tickets containing general feedback, multiple suggestions or duplicates (as that defeats the purpose of the site.)
^^
2560x1440
Where do they take general feedback anyway? I have looked around to no avail ๐
That sounds about right for a 3060 on balanced settings with 1440p - maybe a bit low for an average, but that 1440p adds a lot more that the GPU has to do over 1080p.
But I shall search for that suggestion since I bet others have asked.
so i must change to 1080p?
If you want better FPS, lowering the resolution should affect it greatly. You don't have to do anything though ๐
or what i can do to play this game smooth and it doestn look like shit
If it doesn't affect it though, it could be that there is another issue going on as well.
there are just too many potential things that affect performance in games to be able to say for sure.
yesterday i have on balanced settings 60 fps today i have 30fps whats going on i dont get it
do you have videos (even paused) open in your browser, or software open today that you didn't yesterday? What changed on your systemn from then till now?
noyhing the same i have discord open nothing else yesterday too i only have discord open
and have 60fps and today have 30 fps
today too *
Nothing in the game itself has changed in that time. Did you update drivers or install anything? maybe open something before that's now running in the background?
nope i dont update drivers and i didint instal anything
game just lower fps today
yesterday was better for my pc
idk why
Did you build a whole bunch yesterday or are you loading a different world that may have a larger build on it?
and does restarting your computer help at all?
when you opened the game today, did it compile shaders at all or anything?
no it didint do anything
And do you get the same FPS in a brand new world?
okay, can you close the game and drop your game log in here?
Finding & Sending your Logs
Finding your logs:
For better and faster troubleshooting, please share game logs along with your message.
Open File Explorer
- Navigate to your Steam folder, by default it should be in C:\Program Files (x86)\Steam.
- Find the following file: [...]\Steam\steamapps\common\Enshrouded\enshrouded.log
โ ๏ธ** If you do not have "show known file extensions" in Windows Explorer active, the relevant file will appear only as "enshrouded", with no extension and file type "Text Document".**
Copy and Paste the log file into Discord
- Head over to #troubleshooting and paste the log file into the channel.
(Troubleshooting in Discord is conducted by community volunteers. Please treat them with respect, and appreciation.)
wait im doing it
Did you have DLSS on yesterday? Maybe forced via the Nvidia app settings?
You have your textures set on max quality. I am not sure why it would have worked yesterday, but your GPU doesn't have enough VRAM to be able to pull that off, especially in 1440p. It's likely tossing off a majority of the texture work on to your system memory which is a lot slower and will take more time, which can slow down your frames.
I would suggest setting all your display settings in the game to default and make sure that the NVIDIA app isn't set to optimize the game.
can i send u the logs from yesterday
yeah, they should be in the "backup" folder
and when i click suggested setings it automatically set on balanced
and what does it set the texture resolution to?
oh wait... forgive me I am doing two things at once. the 3060 came with 12gb of vram for some weird reason. It should be fine
so unless you have one of the rare ones that had 8gb max textures "should" be fine
It's one of those weird things nvidia did that made no sense so I always forget it. ๐คฃ
One sec still looking through the logs
okay
The only thing I am seeing in the new log but can't verify in the one from yesterday cause you didn't enter a world in that specific log, is that there is some congestion on the host/server machine - which from the looks of it is your system.
shaders should load when i open game everytime?
But I only see what the log says, and it doesn't say what is causing it, only that it's there.
No. I was checking to see if they did though, because they can cause issues.
oh
its workinng
i have 60 fps
what
now
and they dont drops
i do nothing
game just solved it self
Do you still have 2 other people in your world with you?
then it may have been windows downloading an update or some other software updating itself, or something else on your system temporarilly using your resources that slowed your game down.
Hey, the epic fishing quest seems utterly busted after the update. I cast over 300 times and not even a single epic bite.
I'm having this exact issue also
Seems like a lot of people are as well. Hopefully we can get a confirmation it is an issue and that it will be fixed.
I've noticed this as well on server. Several play sessions over 4 days, many, many frogs, we never got epic fish.
I finally just went to my other server and grabbed one from chest ๐ญ
I am so happy you mentioned that, as I was able to do the same thing. ๐ ๐คฃ
Yeah, but ruined our "no outside resources" on the world ๐ญ
Is that an actual flag on the server, or just a point of pride?
I wish it was a server option.
Until Keen does something about server perms, it's just a pride thing.
Then I do not feel bad about doing it to overcome an obvious defect in the game. 
We started a fresh run with everyone agreeing to not bring in outside resources.
Make sure that you submit a bug report on it, I am sure they are aware of it but just to be sure youโll want to submit one anyway.
@sick pivot as well
I submitted the bug report @zinc oak , but I havea ton of save files from today in Steam, so I am holdinf off on uploading them as the issue seems easy to reproduce.
like just fish? lmao
Yeah, I donโt think itโs something in your save file. Itโs more likely something in the game because I have seen some other people complain about it, I just donโt know if they actually sent in a bug report or not, so itโs good to know that you did!๐
Am i FR the only Person with that issue ?
Hi all, have this weird bug:
https://cdn.steamusercontent.com/ugc/12684530631772120200/0E99FFD5BEC5C20CC03B9EA24013B4FB529C552B/
Anyone has any idea how to break this loop?
Its as if I am teleporting in a loop, so I have around 5 mins until cold kills me, dunno if that will help ๐
Hi
Is anyone having issues with the game crashing lately?
Last 2-3 weeks, If I have a game open for like 2-3 hours, it crashes and my PC also goes into restart.
Nothing of my components is overheating, and my setup is pretty solid.
I did reduce shadows and critical things in the game settings, but the issue persists no matter what I do.
Is anyone having same or similar issues? I don't know what to do to fix this.
Finding & Sending your Logs
Finding your logs:
For better and faster troubleshooting, please share game logs along with your message.
Open File Explorer
- Navigate to your Steam folder, by default it should be in C:\Program Files (x86)\Steam.
- Find the following file: [...]\Steam\steamapps\common\Enshrouded\enshrouded.log
โ ๏ธ** If you do not have "show known file extensions" in Windows Explorer active, the relevant file will appear only as "enshrouded", with no extension and file type "Text Document".**
Copy and Paste the log file into Discord
- Head over to #troubleshooting and paste the log file into the channel.
(Troubleshooting in Discord is conducted by community volunteers. Please treat them with respect, and appreciation.)
This is the log I have
Hardware error is what my PC suggests. But again in the logs of those errors I found no ram leak, no cpu overheating
As I am not so familiar with this, it could be some specific setting somewhere causing this, but . . . not clue if it is my hardware, driver, or the game, of BIOS even
Created a bug report, seems like this character is cooked
๐ญ
If you die, you should be able to spawn elsewhere, right?
Its on an altar xD
So it just loops even after death
Respawns there and there's an animation of him raising his hand or something, so I cannot jump, roll or do anything really
Not sure if it would help if you would host a world and get another player in who would put a platform beneath your character
Will try that maybe
Or bunch of objects so it would push your character on the side or something like that, so you would stop falling
just Join another world
you will Spawn on the ground
or use CheatEngine or WeMod to Teleport yourself
I did that, but when I rejoin the original server it spawns me in the same spot so the thing continues
Question, I have completed this hollow halls, so why is the "?" still there? For the next one, nomads, I do have the hollow halls symbol and no "?" there
Liek i said .. use a Cheat tool and teleport yourself
Its not "CHEATING" if its bugfixing xD
To add onto the "What i tried" part:
ALT + ENTER didnt help .. F11 didnt Help
Restarting Explorer didnt help
It happened to me once, and turned out I actually did not reach the loot room and teleporter so I went to do it again. ๐
Hmm I think I did, but I will do it again at some point. Thanks
Do you have multiple monitors?
Yes 2
If so, try using single screen to see if cursor is still escaping
if it's not the case with 2 monitors issue (I also have 2 but don't have that ingame problem), try hiding taskbard completely, like,, turning it off
If that WOULD be the fix .. then what?
I dotn wana unplug my other monitors whenever i want to play
Wel lthats not a solution for me either ....
That liek saying "well if you car doesnt drive well just dont drive your car"
yeah navigating without my taskbar would be such a nightmare id rather get rid of the game then my taskbar xD
Disabling a monitor isn't a proper fix, I agree. But it might just be a diagnostic step
Hopefully things like these will be ironed out once the game exits early access stage
Yeah i feel liek im never gonna buy any EA game again .. its always a hassle ๐
i dont got the time or endurance anymore t oput up with that stuff .. id rather buy a 80โฌ Ubisoft game ๐ข
Another thing I can think of that could help, but don't have high hopes, enabling this
Other than that . . . ๐คท
i already did that ๐ข
i read somewhere about the copilot thing .. but i dont see any copilot stuff in my task and precess manager .. so idk ....
my gf doesnt have that problem but she has her taskabr to "hidden" but hwen i do that it just popsup anyway ...
You said that completely disabling taskbar (so it can't pop up anytime) is not an option for you.
But, what if you could create a small program, a bash script, or a key shortcut, that would enable/disable taskbar.
For example, press F10, it completely disables it, press again, it enables it.
So it might not be the best solution, but if it works, at least enabling/disabling will be really quick
You can install AutoHotkey, create a script file, edit it with notepad, and have chat gpt or some AI generate you a script you need.
You save code in there, and open it by double click so it starts working, or executes
Yeah i dont trust or liek using ai ... especially not with scripts on my PC cause i have no way of validating what it does
Let's see what this does ๐คฃ
#Requires AutoHotkey v2.0
#SingleInstance Force
global taskbarHidden := false
F10::
{
global taskbarHidden
if (!taskbarHidden)
{
WinHide("ahk_class Shell_TrayWnd")
taskbarHidden := true
ToolTip("Taskbar hidden")
}
else
{
WinShow("ahk_class Shell_TrayWnd")
taskbarHidden := false
ToolTip("Taskbar restored")
}
SetTimer(() => ToolTip(), -1000)
}
This works
I press f10, it removes taskbar, i press again, it returns it
Taskbar is still kept on my second screen tho, so only on my main screen it disappears
And script is running in your tasktray, you can just right click -> quit
so how do i try this now ?
Assuming here you're on windows os?
yes
Let's do in DM so we don't spam this here
UPD: proper server reboot solved my issue
Hello, so basically I asked my husband from TI to do the stuff on the minidump and is not working either, like if I minimize the game it crashes, I don't belive is my pc, because I play normally like Baldurs, and other games only with the enshoudred that this is happening. Im from Brasil and I'm just thinking how many people are with the same issue and don't speak english to come here and ask for help. I really enjoy playing with my friends but from leisure moment it turned into working to make the game work on my pc
Do you have any crash logs or anything? Could help someone diagnose what is going on. Just don't give up, it also took me a while to get everything to work (Linux did not make it easier) but now I am glad I took the time.
So my game keeps crashing with the GPU crash error. I comes out of nowhere, in combat, cooking or just running around building. Do anyone have any good advice to resolve this error?
I have played many hours before without any errors.
@crimson plover Are you monitoring gpu to see if the vitals are within range?
Yes and they seem fine, there are no major spikes or anything like that
Perhaps try lower resolution/graphics to see if that does anything. If that doesnt work try to share a crash report here.
You can also type /minidump here and follow the instructions
I will try that, thanks for the help.
Anybody had enshrouded blue screen their PC and state motherboard bios is damaged? my partners been struggling all of today to even play they keep on getting perpetual crashes too
So I think I've found a bug. I have items that give me bonuses on Inner Fires (additional time in the Shroud), and they work correctly most of the time, but when I go into gliding, I seem to briefly lose all of my levels of Inner Fires (including the ones I got from skill points), greatly reducing my maximum Shroud time. This is fine if I glide outside the Shroud; I get it back soon enough. But when I glide inside the Shroud, it renders Inner Fires worthless.
Me and a friend are trying to play, we're friends on steam, but we can't find eachother when we host the game. We'll play for a couple minutes and then my wifi will go out (womp womp) but then i can't rejoin as it's not in the list anymore
I would report that via F1 ingame. I think they know about it but the more people report it the higher priority it gets on the "needs fixing"-list.
I suppose I know why it happens too, it recalculates the inner fires bonus when you "change your gear" which is what happens when you switch to the glider.
I lost my Enshrouded character after playing on multiple PCs with the same Steam account and getting a cloud sync mismatch. Since then, my old character has disappeared on every PC, and even after checking the local saves, Steam save folders, cloud files, and backup indexes, I still could not recover it. So I wanted to ask: is my save completely lost?
I already contacted Zendesk/support, but I have not received a real reply in weeks. The main thing I care about getting back is my progression, especially my skill points. Even if my full save cannot be restored, would it be possible to restore at least the skill points or send a replacement save with similar progression? I was around level 8 from what I remember.
Anyone else have issues with Yaks constantly getting stuck in walls and such and terrible pathing?
I built a solid wall, they walk into and get half their body stuck, I reposition food dishes over and over, their beds over and over, pick up yaks, reset them down. Their floor surface (grass) is as flat as I can get it.
I have gone through contortions to get them to stop getting stuck and starving themselves.
Anyone else having issues?
I see no sense in playing this game if its gonna GPU crash constantly
Did you guys get it sorted?
What GPU? Do you have updated drivers? If yes, have you tried a clean (or better yet minimal) driver install (after uninstalling with DDU) to see if it fixes it?
I did the things the bot told me
and what drivers, for my nvidia or steam
Steam? Like Steam Deck? What are you playing on, cause nothing from Steam has nVidia drivers
my pc has nvidia, i dont now where the steam drivers are
hello, if possible could I have help with a mini dump issue I am regularly having. I have googled fixes and nothing has helped so far and this is starting to become a problem as I spent more than 2 hours trying to get this to work and steam may not refund me
please and thank you
Yes, their problem is sorted for now, with a script I mentioned
For me it's goats, but yea
If you are on windows then steam has no drivers, he is referring to steam deck (a handheld)
I came from far with many issues, now it is playing flawlessly, If you want I can have a look to see if I recognize anything/
Steam doesn't load graphics drivers. Back to the earlier questions, because the game absolutely doesn't generally "crash GPUs"
Have you run a validation of the installation from Steam? Have you updated the graphics drivers for the Nvidia card? If yes, and the crashes still happen, have you tried a clean (or better yet minimal) driver install (after uninstalling with DDU) to see if it fixes it?
And most importantly: what exactly do you mean when you say "GPU crash"?
I have sent the log, a video of the game crashing and also the paste they requested, is because im no IT person i just want to get in my pc and play, i really enjoy to play with my bffs but after no many months we are moving out to other games
Ah I meant here. People here helped me aswell when I shared my log here and told them wat went wrong
I sent in here, they replied with the steps and all, I asked my husband he did it for me but it didn't help
Ah too bad
Hi! I have an issue where random stuff is not interactable - the character does the animation and the UI refreshes, but interaction doesn't actually happen, or happens and immediatily finishes. I've had it happen with multiple chests, some enemy corpses and now with an npc as well
It is neither interactable for me, nor my wife, and I host the server
Even reinstalling the game did not help
peeps question. I'm playing in a sv that my friend hosts just for the 2 of us
why i can't see any lights ? nor attacks that i perform
fireballs or the wand attacks
nor my torch light
there were other visual bugs but when the sv got restarted they got fixed
we are on the last biome, it started when we got here
Im almost convinced that the GPU crashing is related to the latest update. Before that, it didnt seem to have this many people with GPU crashing errors. Ive tried lowering the graphics settings, verifying the game files, updated drivers, and renamed the json file. It has something to do with the particles from spells and explosives thats causing crashes in every series of graphics card (3k - 5k). It cant possibly be user error for everyone when its only happening in this game.
hi i recently got a issue where things load slowly, its like it has desync. let me explain better.
if you hit, the swish effect shows up 4-5 seconds after. all these these effects and lights sources and such things desyncs suddenly after we have played for days on my local server. does any1 know how to fix this? why it happend?
its due to the textures changing from pristine state to damaged state, thats whats causing your crashes. tell your friends to stop shooting the boom boom arrows when it starts to lag and you will be fine.
that sounds like the same issue i have, did it happen when you got to a dry area? dont want to spoil stuff
Thatโs like telling someone to not play part of the game. Explosive arrows are literally part of the talent tree, which means itโs encouraged to spam them. If itโs known that this is the problem, then either fix it or remove/rework this portion of the talent tree. Telling people to change up their build shouldnโt be considered a solution
just wrong saying that. just avoid spamming them until there is a fix. its not on al textures its on some of them. same happens if you blow up barrels on these textures. or you can keep what you are doing and crashing the game its up to you ๐
Are attacks/lights visible in other biomes? Sounds like shaders to me. Try deleting and reloading them
Hey, has anyone managed to work around the layout issue with DualSense controllers? Steam Input partially fixes the problem but introduces a weird bug where, when scrolling through items on my bar, the inputs get stuck for a few seconds and then return to normal.
Is there a workaround that doesn't involve Steam Input or third-party software?
Thanks
(The bug has persisted for 2 years, maybe even longer ๐ )
ummmmm idk to be honest, there was water where i wass
will do
how do i remove shaders ?
The easiest way is the enshrouded toolfix
u talking chinese to me, that's on steam ?
Type /minidump in here, Step 2 of the Bot Message you get 
it's funny xD
Yeah those look like missing shaders
Had it too but it rebuilt the shader cache after a steam integrity check on the game
is there ANY updated on when the god awful buggy reset-system is going to be fixed?
Is Terrain outside of Flame Alter range not resetting and issue with the current version of the game or just something going wrong with my game?
My game won't load and it keeps making mini dumps of crash logs and I don't know why, Ive tried reinstalling from scratch even moved it from a drive to another via reinstalling and updating windows and my graphic drivers
Hi all! Been playing about 290 hours, so far, on a private hosted locally game with my husband ( he's hosting, I am joining). Enter the problem.... tonight, I log on only for 50%, if that, of the graphics to render in. Almost 10 mins and still not everything is completely visible as well as my character is in their underwear, any controls are extremely delayed, rubber-banding, running while going nowhere and technically unplayable. I have put in a bug report, sending all the info they requested, and am wondering is anyone else had the same issues tonight? My CPU: AMD Ryzen 7 7800X3D 8 Core (4192MHz x 8) and my GPU is an AMD RX9070 XT. Per Unigine Heavenly Benchmark 4.0 results are FPS: 406.01, Score: 10230, Min FPS: 83.4 and Max FPS: 802.0 . I am showing no issues with my system at all and not overheating in the slightest.
Sounds like a shader issue to me. I would suggest the following:
- Disable Steams Shader Precache: Steam>Settings>Download> all the way at the bottom
- type /minidump in here and follow Step 1 and 2 of the Bots instructions you get sent in the DM
My wife and I are playing co-op but only she is getting the XP and completed quests whenever we rescue a new NPC from a Cinder Vault.
We just got the carpenter. This time I claimed the NPC but neither of us got the XP or completed quest.
Hello everyone, could you please tell me? My monitor is 144Hz, all games run at this frequency. When I launch a game, everything works as expected in the menu, but when I launch the world, the frames drop up to 60 and the game starts to lag
although screen synchronization is enabled in the Nvidia control panel
I had an issue when activating altar with building hammer equipped after existing the altar my camera stayed fixed on the altar but my character could run around off camera. Could someone try this and see if itโs only me ?
While a monitor does impact performance, it's pretty much the lowest thing on the list of hardware that does, and really all it is is the the framerate you can get before you can start to see screen tearing and the like if it's not limited to 144hz with vsync or the like.
The major impacts on your FPS are going to be your hardware (mostly GPU, but everything else ties in as well), resolution, game settings, and how much else you have running on your system at the moment.
I made an F1 bug report but just curious if anyone else can recreate this
are you able to repeat the issue?
Yes
Did you verify your game files in steam and try as well?
No but I will ty
yeah do that. I can't check right now, as I am headed to bed, but it's pretty common for people to access the altar menu with the hammer equipped, so I doubt it's everyone getting it, otherwise it would be pretty common to see people asking about it in here as well.
But you already did the report, which is really all that can be done with issues like this anyway,
Thank you rest well!
Hi, I don't know if this problem is a common problem: When I try to load my save file this error appears ("game creation failed"). Could someone help me with this? ๐ค
Hi all, is there a known fix for Adventure Sharing only spawning in Cinder Vault instead of at the sightseeing location?
There is an option for the world owner to set the spawn location at the altar.
when i try to poste something in the screnshot channel the screen is shaking and i cant post anything, can someone fix this problem?
Hi, me and a friend are stuck in a night sanctum and we decided to reload, and we are just falling through the floor. is tehre anyway to unstuck?
relogging doesent work? maybe restart the game
That channel is in slow-mode. there is a timer that will flash at you (bottom right on PC) if you try to post something before the timer is up.
tank you so much. but i cant see the timer
We tried both, the only thing we havent is restarting the server cuz well, the server owner is on a flight rn ๐ฅฒ
wherever we load in on the server, even on a diff character, we just fall through the void
42
ohh i see i have to switch to the channel. it show 2 hours...isnt tha a "little" too much?
No idea. I am not a moderator on here. ๐ You can always use the #1200109637815517184 if you want to showcase a base you are building and have a lot of images. But if you have questions or comments about the discord itself I would go to #discord-support
Did you ever find a fix? I'm currently stuck falling through the floor every time I log in
Server reset fixed it
How screwed am I if I deleted my world and started a new one on accident. On pc?
Hello. Just logging a bug report both through the game and on here:
I built a floor piece too close to the shroud. It glitched and now acts like it doesn't exist. I clip right through it and can't interact with it. It's permanent and can't be deleted. Including with the undo button. It also didn't make a sound when placed.
Anyone else have this problem? Begone! skill is causing massive permanent lag on dedicated server and it seems to accumulate every time I stun an enemy...
I know I am a bit late on this but it depends on how long you played it. You might still have backups of your previous game in there. You can check out this video to see if you can recover the game: https://youtu.be/4xbVXj9kLgU
This is just a quick video to show you the easiest and best way to roll back your saves in Enshrouded whether your steam cloud save is turned on or off. I hope this helps you guys!
Official Enshrouded Discord: https://discord.gg/Enshrouded
=Chapters=
0:00 - Introduction
0:16 - Where To Find Your Saves
1:30 - How The Save System Works
2:32 - Al...
The devs won't see it here. you can follow the instructions here to get the info to the right spot:
I haven't personally heard of anyone having the issue, but that doesn't mean it isn't happening. I would suggest restarting the dedicated server just to be sure, and maybe checking in over at #server-support or even #combat-and-skills and see if they have heard of anything similar.
Thanks. I said I logged it through the game already. Just reporting it in multiple places in case another player in this channel goes looking with the same problem
How do you get rid of fell curse. Have tried antidote. Does not work. Ty
Talk to the alchemist, he'll give you a kind of quest to make a specific antedote for it.
Anyone? :/
Hello. I played Enshrouded in the past and I remember I had not much problems with fps, not very high not very low. Just something I personally could withstand. I reinstalled the game recently and the performance is terrible, 20-30 fps. It feels like game itself is not able to generate fps correctly or the device. What happened? Did game became heavier? How can I solve? I want to play at the resolution and quality I had before and not put everything at lowest settings cause yes.
Ok 35 fps with resolution at min. Something happened to the game, how can I workaround? Not even Lossless scaling can fix this.
i'm having a trouble, i can play alone, but when i try to invite a friend to my map he get a infinite loading screen, and when i try to join his map i got a infite loading scream, can someone help me?
wet dog and soaked dog did not work.
same here, help
Idk what to do we were playing fine all day yesterday and we take a break and suddenly now from last night she cannot load in
My wife is having this happen on our world we have been building for 2 years.
We really want to play
If anyone knows how to fix this infinite loading screen Iโm all ears.
I somehow managed to get her in once late last night after changing passwords, updating drivers, restarting computers. I mean Iโm pretty tech savvy and Iโve done a lot of the things.
I havenโt cleared any caches yet or anything.
Is this a known bug right now?
My server logs show this quite a bit now.
Is it a problem?
heyja,
ive got the following problem: Enshrouded is relatively regularly, crashing my entire PC. Its just "Freezed game" > 10s later > "freezed everything" > pc reboot. No error, no bluescreen, no anything. PC just turns off, reboots.
I've found the following "tips" that i used, that didn't fix it:
Vulcan to native
VSync on
Lower settings / disabled Raytracing
GPU-Drivers are up-to-date
Temp looks good.
Specs:
Win 11
AMD Ryzen 7 7800X3D 4.2GHZ
NVIDIA GeForce RTX 5070
32GB RAM
Anything else you need?
Thanks for your help already! โค๏ธ
open Event Viewer > right click on Custom Views > 'create custom view'
logged > click on drop down > select 'custom range' > set "from" and "to" to 'events on' > set the date and time to when the freeze/crash happened (e.g. if it happened today at 1800, set the date to today, time from 1755 to 1805, you can narrow it down more if you want)
checkbox on: critical, warning, error, information
select 'by log' (should be selected by default) > drop down next to it > expand 'windows logs' > select "application" and "system"
click ok > browse through the events > see what you can find that's related to the game or what can be possibly causing the issue
hmmm cant find anything. the "oldest" one i can see is "OS started", but thats after crash
does it only happen when you're running the game, or do you experience the freezes when doing something else as well? When did it happen first time? Have you been able to run the game before without it freezing > your pc freezing that required a full reboot?
Have you changed any hardware in your pc recently?
its a completely new pc, bought it a few months ago. I've played Enshrouded before but thats 1-2 years ago. Now picked it up and had those problems since the beginning. But it feels like it gets more common.
try deleting the game's shader file (should be in %localappdata%\enshrouded\cache or somewhere similar) and then verify integrity of the game files via steam
I canโt connect. My screen is stuck like this. Do the devs check this channel?
nope, this is for other players to help with troubleshooting, they have another platform for their support:
#i-need-help message
Just to be sure, does the drive you have the game on have enough room on it? Also are you trying to connect to a local world or a server/hosted world?
Okay. Remind me, did we already have you go through all the steps in the /minidump command?
This generally means one of you is unable to make P2P connections for some reason. If either of you is using a VPN, I would suggest not using that, otherwise you'll have to try and figure out which one of you might be having the issue by having a third person try to connect to both of you to see which one has the problem. Unfortunately, this kind of stuff isn't really in my wheelhouse so while there are several reasons why one of you may be having issues making P2P connections, like firewall settings or even how your actual network is set up, I don't really understand them enough to troubleshoot them.
You as well for the comment above
If you have come across a bug, please report it through the in-game feature. It will not be seen here:
they should be able to help you in #server-support
Are either of you using a VPN? if not check the comment above: #troubleshooting message
Hello, a Freind of mine is having crashes after like 30 min playtime the crash reports say
[E 01:23:15,955] Could not prune enough replication states for player 0!
[E 01:23:15,976] Could not prune enough replication states for player 0!
[E 01:23:15,990] Could not prune enough replication states for player 0!
[E 01:23:15,994] [graphics] vkWaitForFences() failed with error 'VK_ERROR_DEVICE_LOST'
[E 01:23:15,994] [graphics] Vulkan device lost...
[W 01:23:15,994] Breadcrumbs are disabled
[W 01:23:15,994] Breadcrumbs are disabled
[E 01:23:16,016] Could not prune enough replication states for player 0!
so its Graphiccard related does anyone know a fix to that
Kind regards
iโm not sure if this is a bug or not but weโre not able to get drak teeth off of like any drak? weโve gone through several camps now and no one has dropped any. are we missing something? is it only specific drak or is this a bug?
@high copper and @jade smelt Please type /minidump in this chat and follow the instructions that will be sent to you from a bot. These resolutions fix a great majority of the issues that can cause crashing in the game. If you are still crashing after doing all the steps, return back here and we'll see if we can't figure out what is going on.
I believe they only drop off specific drak, but I am not 100% sure on that. You may want to check in #enshrouded-chat - someone there may know which specific ones they drop from if that's the case.
Yes, there is enough room. The error appeared when I tried to connect to a public local world. And also when I tried to start a private local game.
hmm. is your cloudsave on or off?
It's on
Okay. Have you already tried restarting your computer?
Yes, I did but it didn't work - and know I tried once more and now I was able to start the save game!
I didn't change anything, I have no idea why it's working now. ๐
All good. As long as it's working, the why is less important unless it happens again ๐
True! โบ๏ธ Thank you very much for your time! ๐ฅฐ
Got ignored, like most of the times in game related discords, but looks like many other people have huge performance issues.
Some are, yeah, but usually it's caused by something. Can I see your game log?
Finding & Sending your Logs
Finding your logs:
For better and faster troubleshooting, please share game logs along with your message.
Open File Explorer
- Navigate to your Steam folder, by default it should be in C:\Program Files (x86)\Steam.
- Find the following file: [...]\Steam\steamapps\common\Enshrouded\enshrouded.log
โ ๏ธ** If you do not have "show known file extensions" in Windows Explorer active, the relevant file will appear only as "enshrouded", with no extension and file type "Text Document".**
Copy and Paste the log file into Discord
- Head over to #troubleshooting and paste the log file into the channel.
(Troubleshooting in Discord is conducted by community volunteers. Please treat them with respect, and appreciation.)
is it valuable even if I played very little?
yes
this also happens for me. what can i do?: i'm having a trouble, i can play alone, but when i try to invite a friend to my map he get a infinite loading screen, and when i try to join his map i got a infite loading scream, can someone help me?
game log, I don't even know how to read it ๐ . I want to add that I checked all the others games today and their performances are the same as last weeks. (very bad for most players but good enough for me)
Native
and what is the native resolution?
2560 x 1600
feels like ive tried it all
Tried to restore preset, and game crashed
Okay so I had to look that GPU up. looks like it's a "workstation GPU" that does relatively decenlty with gaming, but sits a bit less than a 3050 ti laptop. It's fine for 1080p gaming, but when you try and go over it starts to struggle. I also see the texture resolution is sitting at high which will also cause the GPU to struggle. With both of those, it's likely that your VRAM is getting exhausted and the GPU is just struggling to render everything.
You also have your difficulty setting for spawns set to extreme which will tax your system a bit.
I would suggest for your settings to put them on default and change the resolution for the game to 1080p (if it allows you again without crashing) and make sure the texture resolution is not above Balanced. I would also lower the enemy spawn amount in your difficulty settings as well to reduce the stress on the CPU and see if that helps.
are either of you using a VPN?
please actually ask your friend... I can't count how many times I get an answer from people who never ask only to find out this is the issue. ๐คฃ
they both dont know, tried verifying game files, restarting pc and steam, idk
They don't know if they are using a vpn?
I tried different settings, high was default, I put everything on balance and performance, not much difference. But I'll try those things and see.
no neither of us are, sorry forgot saying that part ahah
okay so just to make sure I understand. there are 3 of you. you are hosting and they both get the loading screen issue?
yes, and then if i try joining them, i get the issue but they dont (they can join eachother)
That's what I was going to ask them to do. That's narrowed down the issue to your setup. Something, either your firewall, your ISP or the way your network is set up is not allowing for p2p connections. Unfortunately if you aren't using a VPN, it isn't something I am quite knowledgeable enough on to help troubleshoot with, but what you guys did was good, since it narrowed down the issue to you. but how to find and resolve the issue is outside of my wheelhouse - all I can tell you is what it is.
do u know how to test for firewall issue or isp
speciafically for P2P issues, no. I'd pretty much be searching google and relaying what I read to you.
cant find anything at all. ty tho
Yeah unfortunately you'll have to find someone with more networking knowledge than I have. You can try this though: https://docs.level.io/en/articles/9927428-relay-p2p-troubleshooting
Hi all - i get a black screen and no loading for a long time after i just hit "PLAY " in steam. I can t find any solution searching online easily - anyone know how to fixup? Windows11 Nvida 4090
can I see your game log please?
Finding & Sending your Logs
Finding your logs:
For better and faster troubleshooting, please share game logs along with your message.
Open File Explorer
- Navigate to your Steam folder, by default it should be in C:\Program Files (x86)\Steam.
- Find the following file: [...]\Steam\steamapps\common\Enshrouded\enshrouded.log
โ ๏ธ** If you do not have "show known file extensions" in Windows Explorer active, the relevant file will appear only as "enshrouded", with no extension and file type "Text Document".**
Copy and Paste the log file into Discord
- Head over to #troubleshooting and paste the log file into the channel.
(Troubleshooting in Discord is conducted by community volunteers. Please treat them with respect, and appreciation.)
Okay so you have a Raptor Lake CPU (13th or 14th generation Intel CPU) on your system and your BIOS has not been upgraded to fix the Voltage issue that those CPU's have. This issue can lead to crashing in games and far worse, as it has been known to permanently damage the CPU. While I can't say for sure this is your issue (it probably isn't in this case), it is an issue that needs to be resolved as soon as possible. If you are not sure how to do a firmware update, I would suggest having someone who is help you out with it, as they can brick your system if done incorrectly. Once you have done the update, I would also strongly suggest that you also test the CPU for any damage that could have been caused, as crashing and performance issues could continue on your system, and Intel has extended the warranty for these CPU's due to this issue.
Give me a moment to go through the rest of your log, but that is important so I let you know.
Okay, I am not seeing anything specifically that might be causing the issue in here. Your GPU is initializing correctly and everything seems to be running okay.
I would suggest typing /minidump in this chat and following the first 3 steps to see if they help. I would also disable your game overlays, like in steam, discord and Nvidia app just to make sure they aren't causing any issues as well.
Hello,
I'm playing with some friends and I'm hosting the server on my PC (32 GB RAM, RTX 5070 Ti, Ryzen 7 5700). We were playing without any issues, but over the last few days my friends have started experiencing lag and stuttering, and the server keeps showing a "high load" warning very frequently.
Does anyone know what could be causing this? Is there any file or cache I should clean up?
We already tried destroying some flames to see if it would help and currently only have 3 active flames. We also only have one base, but the problem is still happening.
Any suggestions would be greatly appreciated. Thanks!
(Me and 2 friends only)
are you running a separate executable for a dedicated server or hosting a world from inside your game?
hosting a world from inside my game
Okay, and have you guys done a bunch of building or added a bunch of animals, farms or anything else in the past several days?
No, actually we removed some old flames from previous bases. At the moment we only have one base and 4 active flames, but we don't have any animals yet since we haven't built an area for them.
Nothing in the game (or steam's api afaik) has changed in a couple of weeks, so whatever it would be would likely be either on the save itself or something to do with your system like updates running, software or browser windows or anything else that could be eating your system resources.
Is there anything I can do to fix this? Maybe clear some cache files or reinstall the game?
It really depends on what is going on. Try closing software and browser windows on your system. check a resource monitor and see if something is getting over taxed, and check a different world to see if it's following you over or not to see if it's the save or not.
game crashes when killing multiple mobs same time using explosive arrows and the loot spawn on top of of each other.
Hello! I cannot log into my server. It says that the password is invalid. But I'm using the password that is in my server profile on GPortal website.
I did everything you suggested. I lowered my whole screen resolutions to be able to play fullscreen. I reduced enemies and every setting. Still 23 fps. I say it again: only enshrouded gives me this problems, like my pc performances are reduced to 1/3. Other games work as intended, even games which I cannot even touch recommended. I checked files in steam, defrag, folder location, Nvidia drivers and I asked to a friend of mine that is very capable with a strong pc to play, same problems.
1 tip which worked for me. When using nvidia the DLSS is more stable for me than FSR3
I also switched off nvidia reflex, gave me issues, but I am on Linux so that might be different
I previously tried to swich to DLSS and to disable reflex. I gain 3-4 fps, not enough for stable 30. I need at least 40 to be able to use the "duck" without problems (offline) and pump them to 60.
i did all that. Crashed right now again. Saw the logs, here are mine, maybe taht helps?
I'm now playing on low settings, vsync on
shaders recompiled, game reinstalled
vulcan to native
all other stuff including this github tool ran through, no errors found
Specs:
Win 11
AMD Ryzen 7 7800X3D 4.2GHZ
NVIDIA GeForce RTX 5070
32GB RAM
wool already takes forever and then you also get this shite
they push themselfs stuck into the fence and then say they cant find food so dont produce jackshit
picking them up and replacing resets food etc every time so dosnt help either
@zinc oak hi there, sorry for the random ping (you might need to scroll to see this one), but I figured out the complete hardware failure is literally because of GPU overload. If I can drop settings low enough and cap FPS, GPU utilisation never maxes out, so it is manageable. I saw this happen in GPU intensive apps and today while I was playing another game.
Hi, idk if this is the right channel to ask this but has anyone else experienced not getting certain quests? My friend joined our server quite late and I dont know how she did her missed quests but there are certain quests not showing up despite not having anything related to that quest in her missed quests part?. Is my advice correct that she should follow all the quests and explore per biome before proceeding to the next?
Is there a way to disable forced display settings based on hardware detection? I want to make finer changes but the game ignores launch options like SteamDeck=0.
Hello everyone. My friends and I are creating a local server where I am the host. When we get together in one place, both my friends get discounted. This has not happened in all the past times, we have played together for more than 120 hours, and now it is impossible..
I gave up and just blew up every container at the Elixir refinery site and found more wool in 5 minutes than those hairy fools gave me in days ๐
could gpu drivers have any impact on connectivity issues?
Hello everyone. Not a big issue but was wondering if anyone could help or has had the same issue. Nothing drastic but whenever I open my map it always auto open at my current base(flame teleport) and not on my character it is quite annoying because I have to then click away to recenter the map on my character. Was wonder if anyone has had the same issue or could help...?
Hallo, mein Freund will auf unseren Nitrado Server joinen. Alle anderen kommen da gut rauf. Er fliegt immer nach kurzer Zeit. Wenn er Solo spielt geht es wohl. Firewall, Router Neustart, Dateien patchen, Download Cache leeren, Neuinstallation alles schon probiert. Habt ihr noch Ideen woran es liegen kรถnnte?
It could, I don't know in Enshrouded, but in Warframe my cpu was bad and it had problems to process too much data in a certain amount of time
Nah, this game is a little cooked. I'm not exactly on a low end system, but it feels like nothing would be fast enough for this game
thats sub 40fps on a 5080 and 9800x3d with 32gb ram, pcie 5 x4 ssd
The game keeps crashing for me, randomly. Sometimes after 10 minutes, sometimes after hours of playing, but eventually it crashes. Tried downgrading my settings, tried reinstalling the game, tried reinstalling gpu drivers with ddu, updating the drivers to the latest version, tried Enshrouded Tool Fix
The first log file is multiplayer, the second one is singleplayer, they have different errors but both spam it like crazy before throwing 'VK_ERROR_DEVICE_LOST'
Also a bit unrelated but my display settings are reset every time i reopen the game for some reason, with a custom preset that i have to annoyingly change every single time
RTX 2060, i5-12400, 32GB RAM, win10
Only enshrouded crashes btw, other games don't
Yah, I am definitely the only one
Lowest settings, under 60fps still lol
Maybe somehing is messed up, is there a performance mod or something? It's just not enjoyable as is
And finally, lowest settings on DLSS ultra performance, AKA an internal resolution of 720p, thats still under 120fps, which is wild for what 720p upscaling does to visuals
at least you get 57, give me some fps
๐
Hahaha, everyone's scale is different. I play at 240hz, so anything under 100 feels awful
I just thought a voxel based game would run quicker is all
I can withstand 50, problem is with all settings down I have under 30
So this is best case scenario: Settings maxed, with an exception for shadows, which are on quality instead of max quality. Override DLSS to preset M, because preset M's sharpness filter is better than the in-game one. Smooth Motion is activated in the driver, and enabled ReBar manually for this game. DLSS is on Performance mode (1080 internal, upscaled to 4k). in less demanding scenes, over 120 is possible. Regardless, one shouldn't have to tinker with driver settings like this to get reasonable performance. Please Keen, give us native DLSS FG, and if more optimizations are possible, we need them.
I'm hosting a game for 3-4 other players and some reason they are having major "skipping" issues when combat starts. I've monitored my ram/cpu/gpu usage, have 600mbps Up and 450mbps Down on multiple speedtests +/- 10% ish. As the host... my game plays perfectly polished. No skips at all. Any insight gamers?
Hmm. HD is full a bit I see as I post this...
1.35TB Used now.
Hi, i literally joined this server for this problem, im playing this game pretty much since release played it on some 3060 laptop with friend n stuff everything was working fine, we stopped for a year or so b4 water update i would say, and now my enshrouded crashes non stop it was fine 2 3 days ago crashed once and then worked for hours but its getting worse and worse to unplayable i would say, im doing that github fix as we speak but is there anything else i can do, plainyg on i5 11400 5060 ti 16 gb ddr4 motherboard setup mostly 32 gb ram
I have been having an issue trying to join multiplayer . I have tried being the hosting/not hosting and either people cant join and the load screen continues or the load screen just keeps loading for me. I tried to get a server thinking that would solve the problem - it did not. I verified that the versions were the same. Anyone have any ideas on how to get multiplayer to work properly? The error i was getting with the server is that it was full when there was only one other person present ( yes I checked passwords too ).. I have also uninstalled and reinstalled.
I had similar issues with very low fps on my decently high end gaming computer after the latest patches.
Try these steps: Nvidia control panel, 3d settings, set maximum refresh rate to application controlled. It defaults to prefer maximum refresh rate.
Then change gsync mode from full screen and windowed, to just full screen mode, apply those changes, then change it back to full screen and windowed.
Next, launch the game, change your overall graphics settings to quality mode, then toggle both Nvidia reflex and vsync. Ie if they are off, turn them on then back off, etc.
After doing this, my game runs great, but I have to toggle vsync on and back off again every time I start the game or I'm capped at 60fps with 1% lows under 30 and it runs like junk
No set maximun refresh rate option avaiable under any other name, and I don't gsync mode what and where it is. I know you are trying to help but not everybody is expert in informatic.
But at this point, seeing that devs are not trying to help or communicating they're working on a fix, I think for many players Enshrouded is just gone
I will wait a month, and if no fix is made, for me the game will become a scam, 1/10 like those scam games you can find in steam
For my extend, I tried everything, even to change .json file, to switch to directx, to change 3d settings nvidia panel, no use. We will see now if team Enshrouded is like Valheim one or EA
Can you tell me what the crashes look like for you? Mine are very violently pixellated.
For me its just a black screen on both monitors for a second before the game closes and a popup appears
well, I don't think mine is the same problem, but if you experience the same issue with lowered graphics settings (or after running toolfix), you can confirm this
Yeah, same issue with any graphics settings
For me it restarts the nvidia driver for some reason tho
The host sees their own game run the smoothest as they are the network authority. Clients usually have to request the authority/server to relay their positions around, so if that communication is happening over a flaky network, your clients (friend's computers) will look like that.
Maybe try changing the DXGI swapchain setting in your driver if you have that, because you are running into a vulkan error
I'll try that, thanks!
Any known network setting changes to improve as host for Enshrouded? Itโs a gigabit connection with very solid upload/download speeds at peak hours.
Iโve always been the host for our player group, Grounded, Valheim, 7 Days, Windrose, Moria, etc and weโve never experienced this. Even when we did Enshrouded play through about 1 year ago its was smooth. Completely unplayable now.
This is a recent bug of sorts, even I have been experiencing it. You can try to be sure by asking about the physical locations of your friend group and their connectivity, but it's likely a problem with the current build.
Generic advice: Moderate NAT (type 2), port forwarding, and a few other settings may help with the network properties.
Anyone having an issue where your game suddenly stutters, freezes and crashes?
i seem to be not able to unlock the location to the kindlewastes hollow hall, it has a question mark icon. it also doesn't complete the hidden crafting recipes quest (assuming its this hall), but the kindle wastes hollow hall quest successfully completed.
currently having this bug where im forever respawning and falling through the floor stuck in an animation. i literally cant do anything dawg. every where on google didnt give me a helpful avenue, anyone got some advice?
try swinging the pickaxe, even randomly seems to help sometimes?
if you can get to it
I was local hosting, only 2 of us, but I was constantly getting warned that server performance was degraded, likely because my computer is a bit old and only barely runs enshrouded above 30 fps. I decided to set up a dedicated server to fix this with a laptop I happen to have which can run enshrouded easily. After setting it up, I found that despite a lan ping of <10ms, I'm getting 60-300ms latency in game. After checking with wireshark I'm certain that it's connecting through steam relay instead of the local network, but I don't know how to fix this
Additionally after setting up the port forwarding on the router so others could join the latency is consistently above 200ms, which seems excessive
nvm I fixed this issue, but 60ms still doesn't make any sense when a ping to the server is only 8ms average
60-80ms latency is fine if that's normal or there's nothing I can do about it, but it seems odd it'd be so high when both devices are on the local network
hi everyone! will there be a fix for the crashes while playing?
ive tried the fixes i was told last time with no luck
nvm I saw the pins in #server-support , I'll just live with it for now
All of a sudden getting game crashes, dumps are saying "vulkan device lost" or "stack overload" or "access violation" I've tried everything from rolling back drivers, reinstalling windows, changing to native on nvidia app, running as admin, deleting shaders (recompiling shaders just sits at 100% on the opening menu when it doesnt instantly crash), ive tried the fix tool and verifying/reinstalling ...was working fine 3 days ago of anyone would know anything please ๐
Any settings i can change to fight the fps drop upon spamming explosive arrows?
Is there a known issue list?
We got some strange problems with gems that work globally for all chars and lifesteal with high amounts(2-3 times the dmg)
is this bug just for me -- chests are not respawning? even after 2 hours far away from the area
This happened 3 times in 1 day i just bought the game a day ago what should i do
Type /minidump here in the chat, those steps usually resolve it for most people. Let me know if you're still having trouble after that
ty
I take it you did actually find the hidden recipe? That was my issue when I had the same thing
Everything set to performance? Gpu cpu battery etc
I am having a similar issue. My wife is the host but if I collect an NPC the quest just disappears and neither of us get XP. If she collects the NPC she gets a completed quest but it don't so she's been out leveling me and I have to mine ores to close the gap.
for me it crashes when I switch v-sinc and some options
If I did I found it so long ago I can't remember what it was
This just happened to my friends character. Curious if you found any solution to this? ๐๐ป
so is anyone else getting game crashes for the game trying to prune player 0 which is myself. and thus closing my game...
heres 4 different times it happened
every time its because texture quality was at the max. and it just terminates my game pruning me out of my own server.
Have you updated GPU drivers recently?
also, every time i launch the game i have to remember to turn it down or it will crash. and its not like i can notice its all the way up. theres no fps drops between max quality and quality. literally 0 fps drops to even notice that it reverted. it just closed after 5-10 minutes of gameplay.
why are the logs different here.
cause its not showing the full logs...
at the bottom of every log
IT DID IT AGAIN!!!!
WHAT IS THIS CRAP
this needs to be fixed immediately.
this SHIT didnt happen in 0.6
@zinc hamlet may I get some development help on this matter please, I see it's a recurring previous issue with claims the development team has since patched this issue but I appear to be getting pruned out of my own server every 5-10 minutes into gameplay... And that's made the game unplayable as I'm stuck in a crash loop. I can make it into a world, walk around for 5-10 minutes then crash cause the server couldn't quote "prune enough replication states for player 0" whatever that is.
Well, you're in the right place, but I can't help you, I'm not too good at the technical side of server/enshrouded stuff.
Most of the highly technical folks are in the EU timeframe so unluckily you're probably at a challenging time of day to get help. But I'm sure someone will be around that can help you. Generally we ask that you don't ping mods for anything other than discord-related issues (which is what we're mainly here to help with)
My apologies I'm drowning here and I can't figure who to call on the matter haha, I've tried everything and it's a consistent crash every time.
All logs are the same
Yeah, I know how that goes. The limit of my knowledge is the standard "Restart, verify files, reinstall" sort of advice.
Haha I feel you on that one man! That's about as far as I can throw the rock too hahaha!
i bet its the same error im having
go to where your game is installed and pull your crash dump
right click the game in steam then browse local files then put your logs here
or scroll to the bottom
are you crashing from player 0 prunes as well?
"Could not prune enough replication states for player 0!"
looks like this?
read what i said
find the log it is generating
go to where its generating crash dumps...
post your logs
do your logs look like mine above?
Evening folks - Quick Question: Will there still be issues with Enshrouded crashing if running Hyper-V? At present I have to disable Hyper-V Virtual Machine Management along with the HV Host Service to be able to run the game. Will the new upcoming update address this issue?
Hey guys. Its been 10 days since i sent a ticket for my problem but nobody seems to help yet.
I still see my stamina bar, icons on hotbar and inventory very burry, as if it was being rendered in a lower resolution.
Anyone else with this problem?
Yes sir we updated before playing the game the very first time and we have been playing smoothly for 2+weeks until this
I've had this aswell, in a bit Ill look up what I did to fix this. Gotta walk the dog girst. Im on linux though so it might not work for you.
My issue was that I was on fsr3 and not on dlss (i have a nvdia gpu). When I switched that the errors stopped
hi everyone, just updated my nvidia rtx 4090 to the 610 game ready driver... Instant crashing in Enshrouded. I was playing all night, now after the update, the game won't even open
Try deleting shaders and compiling them again
yeah, tried that, it just made the problem worse.
Whats the deal with this "compiling shaders" drama?
Its a big issue in this game, plenty of reports from alot of users about this constant crashing, yet theres no willingness to find a solution to this?
ive been at this for 3 hours... after a while you realize its definitely an issue with the game
It is probably different for you than or me. I am on linux and when my nvidia driver updates I have to delete the shaders or else I am bound to crash at some point.
Could you elaborate what you see exactly when you start the game and it does not open? It just doesnt open or you see something happening, freeze?
Also, have you tried deleting your json file (copy it to another folder so you still have it). I have heard it helps some people
when i start the game, it goes to the play screen, where it begins to compile the shaders, then crashes... every 1%
It did this the last game update, also. Exact same way, except it would crash after every 10 %
... like why are players being forced to go through this without a proper solution?
There's a whole posting on this problem on Steam and on Reddit
Sometimes the game will just crash, other times it will lock the whole pc and i have to reboot it
And other times, it will show a MiniDump
Don't you love when the development team is dead silent on game breaking matters!
I know I sure love it when devs are crickets.
Check your resolution scale is 1 to 1, thats what was causing mine to crash.
Im assuming you checked the dump?
Have you gone into Steam>Settings>Downloads and disabled Shader Pre-Caching?
I truly feel for all you players having issues, and with that said, it should be noted I've been playing/hosting servers for a year with none of these issues.
okay i'm back.. .and with a new revelation
the problem has been solved
So my specs are:
Tuf Gaming Z790 Plus Wifi Mobo
i9 14900k (Intel Defaults in Bios)
64 gb DDR5 6000Mhz Ram
Samsung 980 Pro nvme SSD's
RTX 4090
Enshrouded kept crashing, so I check the event viewer deeper and see there's WHEA errors being created , pointing to a few unstable cores in the cpu.
I found this strange because I put on all the Intel default limits in Bios..
Went back to Bios, checked it, everything was set properly, but I just decided to do a complete reset in bios.
After the reset, I reapplied all the settings for Intel Default , watched the P1 and P2 / 253 watts with 307A etc.
This time, when I logged back into windows, the game loaded up fine, compiled the Shaders in like 7 minutes and was in the game
great
Hi! Last year, my world save disappeared, but I was able to restore it from the old folder. This time, I redownloaded the game after a year of inactivity and my character disappeared. For some reason, the save folder only contains characters from 2024. The max character level is 23, but I played in 2025 as well, and here's a screenshot of my achievements. I have an achievement for level 30, but the character with it is missing. Is there any way to restore it?
Ive seen an Nvidia filter do that.
Do you mean reset cmos, because bios resetting is impossible?
They mean reset to defaults.
try this out. https://www.reddit.com/r/Enshrouded/comments/1tcdeiy/enshrouded_keeps_crashing/ "Nvidia Control Panel for Enshrouded change Vulkan/OpenGL Present Method from "Auto" to "Prefer Native""
in case you are unaware of how to get to this. Open the Nvidia Control Panel. Select manage 3d settings on the left hand side. On this screen click Program Settings at the top. You then need to select or browse and then select Enshrouded.exe, once thats done. Scroll to the bottom of the list and the option should be there for Vulkan/OpenGL Present Method. Set this to Native. Click Apply and Okay and try the game again
@zinc oak it seems like I fixed the error issue by myself via hints by chat gpt
I found that by default a bunch of odd settings where enabled in the enshrouded_local.json, Xess, DLSS and FSR where somehow all enabled at the same time xD
Anyone encountered this error?
Can anyone help me with this?
I'm up by pillars of creation. I noticed just before this that I couldn't interact with the flame altar, and some nearby Furbolgs were bugging out and my arrows were going straight through them
Ive had that happen on my dedicated server where some parts of the world wouldnt load in correctly with collision etc. A couple of restarts of both server and client fixed that iirc.
Not sure if thats the same issue here
You have fallen through and are outside the boundaries of the map. Fast travel if possible, otherwise exit to the main menu and rejoin.
I've tried rejoining. I don't own the dedicated server so not sure if I can restart it
And can't fast travel, it teleports me back before I get the chance
Is there a way to change where I load in?
I haven't see that behavior then. If quitting to the main menu doesn't start you back at the most recent flame altar it's not acting normally. Can you open the map and try that option at the bottom to fast travel to the last altar visited?
If you switch to a new character you should start at the beginning. Then if you switch back you might start where you left off. Not sure tho
You'll have to contact the server owner in that case
This is at the flame altar
It happened when I teleported there
I'll try a new char
I see the altar in your video. If you just now placed it can you still open the altar menu? If so deactivate it. Then you may be able to get back to a different location.
I've tried going in as another character, but it's not letting me interact with the altar...
I can't press e
Is there a way to remove altars from a distance
Or set a new spawn point?
You have moved beyond my ability to assist. I know there is a way to backup and restore worlds but am unfamiliar with the process. It may be possible to load a recent backup? Not sure if it is backing up automatically though.
If thats running on a server you got no backups to restore other than character files
No
Haha, now my second character is doing the same thing...
As I was trying to get rid of it
Told you, Server needs a restart or 2.
Hi guys, question i'm hosting a new world but for some reason my friends cannot connect they have like 15 min in the loading screen hehehe
I already check for updates, restart my computer buy it doesnt work T.T
didnt work
i beleive i figured out in part whats going on, there are 2 icons, the hollow hall with the ? one over top of it, doesnt tie to a quest, but says Collections: Hollow, which i am not finding as a listing in the journal, the ? icon is just overwriting the hall one. doesnt explain why i cant progress the hidden crafting recipes, its 2/3 complete
It actually does, unless you did it. The hidden crafting recipes is the quest in the journal. So if you still see 2/3 id suggest you get in there and get the hidden building furniture and the artifacts. Im not sure which is tied to the quest but when I did this the "?" Disappeared
ok, so 2/3 suggests im 2 down, or is it im on the 2nd, also only the kindle waste and revelwood have the ?, nomad hilands is clear
2/3 suggests you have done everything you need in 2 out of 3 halls. Add you still see 2 "?". I cannot explain that. Although yesterday I also had for some building blocks that I had 2 "?" On the map, when I grabbed one the other dissappeared.
thank you for clearifying
Np, goodluck! Let me know how it goes, you've made me curious if it's the same thing I had
will do, i just went thru revelwood just a bit ago, and didn't see anything, so i thought it might have been already cleared, these hollow halls are a slog, even at max level if just considering time expenditure.
I agree, the last one took me quite some time to clear solo. I don't like watching videos beforehand so I'm looking around for ages. At the end I have to watch videos to find all artifacts because they are in hidden rooms behind a corner far away where you get once you go through a hidden wall.. Very hard to find but I just cannot live with "?" On my map