#technology-discussion
1 messages · Page 383 of 1
Make sure both are evenly tightened, if not it won’t have even pressure and thus you’ll get odd heat spots
I have a D14 so I know it’s kind of clunky to install specially if the board is already in the case
So if you had to slide to around a lot to get the screw holes to line up with the threads it could’ve compromised the thermal compound
I placed it while board was outside, so I kinda feel like i've done it right, but those results made me question it
Did your clock speeds go down while testing?
i'm not sure haven't checked that
Those chips are known to run pretty hot and as bidori said above stress tests for a long time usually create more heat
Check task manager and watch the performance tab
1 min of testing results in 100c xD
If the clock rate isn’t going down it’s probably within tolerances
Synthetic workloads aren’t indicative of real world scenarios
i'll test that, btw does that shows if it goes down from 4900 ?
It should yeah
As long as it doesn’t drop below 2 GHZ you should be fine
Turbo clocks run in stages
The highest turbo frequency will come on and hold until it’s not thermally viable to do so and will go down slightly
If it’s actually overheating it will kick in protections and significantly downclock itself
it seems to be at 4600 - 4700
That seems fine then
If you had a real issue it would probably crop up in gaming workloads
But those don’t push every thread to 10 percent
so I shouldn't worry much about it ? I just installed the cpu + fan + motherboard i'm just checking if everything was installed alright
Yeah I think you’re okay
Like I said those chips are known to run very hot and synthetic benchmarks aren’t indicative of real world situations
If you have a 2nd monitor have a temp monitor running on it while playing a game
Or use an overlay
true, I ran cyperpunk on high, and temp was stuck at 60, which seems pretty good
Yeah
I always slide around a lot when I screw holes
😳
uhm, is there an easy way to check/organize storage for types and such?
by looking at my ssd, I notice I have an extra 150-100 gb compared to what my actual free space should be
windirstat might help
I'll check
Anyone have a universal remote for tv/sound bar they'd recommend? LG TV, Samsung D450 sound bar
floor e-brake is also usually hugged against the left size of the firewall. hard to mistake it
Oh yea
More importantly, they're really high up, like you have to lift your leg up to get your foot on it
If you accidentally hit that while reaching for the clutch, you're gonna break your leg slamming it into the clutch pedal all the time xD
Have you tried ordering a new replacement remote from Samsung support?
I'm looking at one, yeah, but I also would prefer to jusg have one remote if feasible.
Oh, that way. Yeah it's mildly annoying having two, but I usually don't have to adjust the audio levels too often.
My soundbar remote is a pretty good size. It's not the little 2 inch ones, it's about half the size of a normal TV remote so it fits next to it okay.
if you get a good one you can usually set it so the volume keys always go to the speakers/receiver/whatever
one thing to also consider lol
directv/dish/comcast kinda remotes are often for sale (new) for cheap on ebay
like one time I bought a set of brand new directv ones for like $8 or something really cheap
https://www.amazon.com/gp/product/B07889L418/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1
$14 now, and there is one drawback
Save when you purchase a 2 pack. The RC66RX has more codes available than it's predecessors (RC65RX, RC65R and RC64R). It can do everything the Infrared(IR) can do, and more. It's Radio Frequency (RF) capable, so you don't have to point your remote at your receiver to control it. You change chann...
they tend to have a couple annoying cases where they default to the nonexistent directv box 😄
The only issue with those is they have like ... too many buttons. My parents Spectrum remote takes me awhile to use bc I have to look at it every time to make sure im pressing the right buttons bc there are like 50 of them lol
Curious... PC i'm on has a nVidia 970 in it running 60fps at Ultra settings (FFXIV of course...). Building a new PC with a TUF 3080 Ti OC... Should I expect the graphics to change much?
ay lol
i do like having a numpad though
No
The only issue I have is my soundbar has detachable satellite speakers that you can use for rear channels when watching movies, but they "lose connection" and discharge randomly sometimes. Known issue with the JBL 9.1 so hopefully it can be fixed with firmware updates
Buying a 3080ti in this market? Oof your wallet. FF14 is CPU-bound, so as iseterre alluded to: Your FPS will be significantly higher, but it's more the CPU being better than what the GPU can add. And there still might be some FPS hiccups in crowded areas
Yeah, won the Newegg Shuffle and got a Asus TUF 3080 Ti OC... So I decided to build a new computer. But with what you said, I currently have an i7 6700, new rig will have a Ryzen 7 5800X. So hopefully some changes? I haven't noticed any crazy lag or stutter on my current rig though...
Wish they were MSRP though haha
Should be more than enough to run high framerates
but for a while you couldn't find a 3080 anything under2k
yea I think the first titan retailed for around $1k
Which 3080 Ti? Don't say FE, cuz that's like $500 extra lol.
ahahaha the gtx titan in 2013:
At $999, only a small number of people can afford one.
to be fair, that was 9 years ago
I'm trying to find a 3060 Ti for my wife's build, doing her build tomorrow when all her components come in, Valentine's Day lol... She thinks i'm building my computer and it's my components coming in tomorrow... Luckily her's is an i7 build, so it has integrated gpu while I source a 3060 or 3060 Ti.
What does she do anyway
She's a coder/programmer and does web design on the side... Her hobby is photography.
Was curious if any of you had any leads or possibilities of a 3060 (Ti), FE at MSRP........ I know it's a long shot sigh... I follow Restockify and yesterday's Best Buy Drop was horrible, not as bad as Thursday's.... But I couldn't score anything :/
Winning the ability to pay out the ass for something. What a time to be alive /s
I see
A 3060ti should be overkill unless she's also looking to play graphically intensive stuff
Right? That's what I was talking about in Restockify... It's crazy that we're kinda forced to buy things we normally wouldn't... No way in hell I would've paid for an Asus card if the FEs weren't... such unicorns.
She doesn't game whatsoever lol.
More than overkill then
Maybe consider radeon cards if her workflow can be accelerated by opencl?
unless she's working w stuff that's cuda only
If you want Nvidia, your best bet is probably getting on the EVGA waiting list on their site.
Otherwise if you want to gamble on AMD, they do drops every Thursday.
4090: MSRP: "Yes"
let's go
three times the expected price, of course
LOOK MR JENSEN WANTS A NEW LEATHER JACKET K
Well.... I'm thinking her build is already overkill, so I might as well go with an overkill card too... Her rig is a i7 12700K + 64GB 4000mHz DDR5.
"How much of my wallet will it cost me?" "Yes."
Honestly, I would just go with a DDR4 board if you can
I think they already got the RAM

The ram could buy you a GPU heh
I'd just get an rx 6600 if she needs gpu accel
And it's not any better than DDR4.
So the thing about the GPU LOL
Well
DDR4 is around comparable to DDR5 for gaming but,
There are gains in mem sensitive workloads
And you can't return it without a 15% restocking fee now right? Well what's done is done I suppose but DDR5 is a waste
Is it not weird that i'll have the Ryzen CPU with a nVidia card and she would have the Intel CPU with an AMD GPU?
I know they work
Are potential 20% gains worth paying 400% more for ram?
it's just a weird mix up haha
I guess
And, it's a huge depends on that front
Honestly
But, the RAM's already bought
ehhh
So there's no use discussing it at this point
I grabbed through Amazon Prime, so returning it... no biggie.
bhphotovideo: 619 for a 6600xt, 899 fopr a 6700xt, 1399 for a 6800xt
The issue w returning ram, is that you also have to return the motherboard and find one with ddr4 compat
I'm pretty sure the Strix Z690-I is DDR4 and 5
You might be able to find a 6600 for 400
Nope
Well
It can be one or the other
Just not both at the same time
I remember when you could get motherboards that had banks of both slots xD
When you buy the board you'll see if it's ddr4 or ddr5
one sec... I swear it's both
I kinda miss those times
but she wants DDR5, so either way.... I don't have a choice sigh
I don't think z690 supports that
I doubt it too
Anyways
Even a 6600 would be more than overkill unless her workflow's significantly impacted by the addition of a gpu
obviously she requires a threadripper and a 3090 ti
Oh yeah, you right, DDR5 only lol
5 monitors. at least
dual 3090ti. sorry.

don't wanna under prepare ya know
you can buy 2 used cars with that
LOL
not these days
(i dunoe if there are PSUs capable of powering two 3090 tis...)
$275 for 64gb DDR4-3200 and $800 for DDR5-4800 oof
SLI 4090 Ti OC ROG Strix...
There are, but you would be at the top end of the market then. Silverstone makes some 1600W models
Okay, I did get her a 2TB m.2 lol
2 seperate power supplies in addition to the psu in the system
gotta get microsoft 365
....
5 years of unlimited cloud storage
the PSU is a Seasonic 1000TX
fuck it. get an ascii miner while we're at it
I'd probably go check w her to verify if her workflow has any preference for cuda or opencl
-gets out a m1 mac mini-
If opencl's fine then a 6600 would be more than enough
Darnit! I'm driving in to my brother's place in LA on a Wednesday and The Schiitr is only open on Thurs-Sunday. So I'll have to backtrack a 45min drive to visit it the next day
Also: Heh...heh... Schiitr
man I fucking hate driving to burbank
Santa Clarita
oh dang nvm
It's just after you get thru the Grapevine
the only reason I'll be driving through santa clarita again
... Is there... a diff.... fuh
is when I move back up to the bay
cuda is nvidia specific, iirc
Actually, maybe I can go there when we visit sixflags, I think that's up that way
honestly I'd rather just buy their stuff and take my chances than do that drive lmao
Cuda is an nvidia thing
i actually don't know what the requirements are for this PC that I'm currently giving ideas on

Editing, no gaming whatsoever
so what ya do
Wait... what case is this going into
it's already bought, no?
GUNDAM CASE
sorry I couldn't help
Fractal Torrent Nano
i want a gundam case
Mh
ugh. clear back panel
that motherboard is the shit, tho
but the cooler is nice
yea they had a funny way of solving the clear side panel
by putting that tinted plastic panel inside to hide the cables
cable management must be a nightmare in that thing
That gundam case looks tits..... I don't even wanna know the price tag though
my case has glass on that side too, but they came up with my favorite solution to it
it's just printed
That looks nice
i wonder what will eventually take the throne from the o11d
the noctua cooler should be fine inside the case
oh hey look https://www.reddit.com/r/pcmasterrace/comments/sr0f9c/got_a_really_exciting_gift_from_my_girlfriend_for/
only question is if the motherboard has enough clearance for it
i guess GPUs make a good vday gift
If the person is remotely interested in pc gaming, yeah
A console probably would be a better buy for most other people though
credit to owner
original korean version : https://youtu.be/cEN00wMFB2A
subtitle made by https://www.facebook.com/waynehobbyindustry/videos/1000994053627619/
Was that towards me?
yeah
only potential issue i can see is the noctua cooler literally not fitting on the socket due to issues w/ motherboard/ram clearance
if that ends up being an issue, i'd probably look into buying an AIO liquid cooler since those generally dont have that issue in these types of motherboards
Yeah, so LTT installed the D15 in the Fractal Torrent Nano, it clears. Then someone on Reddit confirmed the D15 fits the Z690-I only if you pull off the m.2 heatsink and run just 1 m.2. That's why I got her a 2TB since I originally was going to grab her a 500TB boot drive and a 1TB Steam drive.
I see
As long as you're fine w not having the extra m.2 slot be useable, that should be fine
I... hope she's fine with it LOL

Oh, it has to be EKWB if I go water.... Alphacool at minimum... Or maybe Corsair, but i'd probably go with EK.
You really don't have to
Fair
There is, you have to ditch the 180
but the issue is
the GPU would be the only way to get fresh air in the case
and... well...
that's bad. Unless... I think a 140 could fit "in front" of the 3060 since they're so tiny.
but even then, that's just air from the underside of the case, her RAM and CPU would be in hell.
Fk.
I just realized... I need to order a 140mm Noctua for the exhaust.
facepalm
God damnit.
I knew I forgot something.
Hm
time to go cry abt it
I wonder if there are any large coolers that don't interfere with the RAM heatsink

Well
It's just 1 fan
it can't be that bad
yeah... the exhaust fan.
you mean the m.2 heatsink?
oh
Yeah, my bad
I've been trying to get a p3s clear and my brain is mush rn
All I can see is my blackmage rotation when I close my eyes @.@
LOL

BLMs ftw
fire 4 
No rush
and I only play on weekends
It's not like the raids will disappear if you don't clear them now
My buddy/co-worker looks at me in disgust every day. I told him i've skipped every cutscene after like level 18.

Job and MSQ
There isn't much going on in ARR tbh
It's mostly worldbuilding, but I just read back on everything I missed
Do the expansions even add onto the MSQ?
Well
Mhm
Every expansion builds upon the last story wise
It's like a really long-form novel
Well
It pretty much is
Interesting... Well, we've definitely derailed the #technology-discussion channel.
Oh I hope as hell it does.
xiv did a tick/tock method of storytelling where there's buildup for a future scenario (arr teases/builds for stormblood, heavensward builds up for shadowbringers. endwalker wraps up with thematic zones - old shar is arr, thavnair is heavensward, garlemald is stormblood, the rest is new)
They're supposed to "match" lol
This is what happens when you skip every single cutscene... I truly appreciate the clarification, but those are certainly words that I have no idea of the meaning.... sigh. Other than those are the expansions LOL
Plus, I can't think of any other air coolers that out perform so many water coolers.
skipping all of arr isn't going to make you lose anything important to be honest. there's a lot of hardcore forshadowing in prae but those cs are forced on everyone
might get the tells in little ala mhigo not burning through dialog but nothing is going to be a smack in the face (like patch 3.4 msq or 4.5) storytelling wise
Interesting...
GOOD GOD
it looks gorgeous
as far as tower/air coolers i would recommend scythe fuma 2 for the $60 category, and vetroo v5 for a budget cooler (which I use and agree with reviews that the mounting kinda sucks but it does the job)

11900K is fire ... literally /s
That looks like the one Cougar case
the v5 is same difference with the nh-u12s but the included fan is a little louder (and kinda derpy when it comes to setting up ARGB - you want it first on the chain)
I just need the best air CPU cooler ever because it's an ITX build lol. not exactly SFF, but kind of...
But what I really need is to find a 3060 or 3060 Ti... I was going to say 3050, but my boss tells me I might as well get some 10 series equivalent lol
Yeah the 3050 and 6500XT are meme cards
i would recommend 3060 ti if given the chance mostly since the frame rate to mony is way better than 3060 plain (at the current scalpers paradise street prices)
Refusing to pay scalper prices... i'm trying to crack the Best Buy drops lol
They been making it a PITA with the TT sub
I think there is a Zotac 3070 that's on the shorter end that might fit as well
although yesterday's drop didn't require it... but the endless verification loops screwed me
Avoiding Gigabyte and Zotac and PNY.
and trying to avoid EVGA, but I might if the price is right.
and 30 series is overkill for the build i'm doing right now, so I'm just trying to get a FE since they're the lowest prices. And they look pretty imo.
So you're avoiding the entire market except for MSI then lol
I've had 3-4 Gigabyte cards at this point and never had an issue shrug
I'm happy with my asus but considering the current choices it's hard to go in on a brand when so many are low key scum (gigatrash and zotac default denying warranty claims, msi hating reviewers, phy is just a ripoff)
in a nutshell, to get you up to speed, this card i'm looking for, is for my wife's build, she's not a gamer whatsoever. Just a content creator, where her photography will be the most strenuous on her gpu... which is practically nothing, so maybe the onboard GPU on the i7 12700K will be enough... If it is, then so be it, at least I can throw in more fans in the bottom instead lol
didn't have any problem with previous zotac though
MSI, Asus and Founders are what i'd be interested in.
I mean, you could always try the iGPU for now. Do you have any older cards to throw in it?
I'm not sure how much GPU acceleration really matters in Lightroom and Photoshop
my card is a Asus TUF 3080 Ti OC, so if I can get her a TUF 3060, it'd match, but then it's huge for no reason and those alder lakes run hot... so i'm pushing for FE.
for just photoshop and the almighty adobe camera raw plugin on board gpu should work fine
That's what i'm hoping for.
You can use that as a cost-savings offset for your DDR5 ram ;x
or the z690 mobo because who doesn't like spending double for bleeding edge tech 
here, this is what the 3060 is going in
At this point I think they're just charging double on everything bc fuck-you that's why! vague hand gestures towards covid and supply chains
so you're not wrong about the Z690
D:
Did she have a previous PC? You normally shouldn't have to buy Windows again
They accept keys as far back as Win7 for 10 or 11 upgrades
Nope, she's coming from mac, she's been using my old Asus ROG G20CB that i'm using right now for her programming and coding. So I decided to build her's before mine, she thinks i'm building my PC tomorrow, but it's really her's... I'll wait till I get paid this week to order my stuff... Intel crap drained me...
I mean, to be fair you didn't need a Z-board or the DDR5 memory
If she was doing productivity work and not relying on the GPU or overclocking etc.
(as far as "intel crap drained me" goes)

I'm honestly not sure why the 12th gen boards are so much more. I don't remember that being a thing for new chipsets in the past where they're just jacked up double
Semiconductor shortsge
Motherboards are full of active ICs
Power delivery, communication chips, etc
Not to mention the raw resources that goes into it are also jacked the fucked up
Bet you if AMD had newer am5 boards it'll be the same
Although it dawns on me, if the wife had a Mac before, maybe she has thunderbolt monitors, hence wanting the board with thunderbolt onboard
@stark hedge I kinda wonder if she would feel more at home with Windows11 then instead of Win10 since everyone on Windows seems to complain 11 "feels like a Mac" lol
Yeah.... That's why I went with 10 so she can decide lol...
And I just wanted to future proof her (and my) build(s)
I'd assume the same
I went to the dealership last week for an oil change and inspection before my cross-country drive and their lot is just sad.
In the "main lot" area they have maybe a dozen cars, then the secondary lot that looks like it's meant to hold upwards of a couple hundred is completely empty save 4 cars blocking off entrances
Then I had a good laugh at the radio commercial for the dealer across the street talking about how they have "over 400 vehicles in our pipeline waiting for you!"
in our pipeline ... aka vehicle orders waiting on delivery, not actual stock. most won't be delivered for months...
I used to work for a car factory, and they indeed had hundreds of vehicles ready to go..mbut due to supply issues they were 90% complete and have been sat for months
I believe it. Car can be 99% complete, but if it's missing a couple key sensors or components then there it sits
hard part there is even if they really did their homework and used a modular platform, it'd probably still take a while to get anything that say, drives the airbags or other safety systems, approved quickly
I mean it's their own damn fault for so many reasons >>
Goddamn ... when was this map from. Definitely not recent:
The section on the right with the building had like a dozen. That entire lot on the left was completely empty save for 3 cars blocking the entrance
mmmhmmm
reminds me of the toyota dealer out here lol
well, one that really struck me was the one in carson by the 405
their entire front lot was empty
Poor sales guys. Terrible time to be in cars
True. Unless you're ordering and willing to wait like 6 months, used prices are up a silly amount
My car is up like $4k in value since I bought it almost a year ago lol
ahh the hard part is then you'd prolly want to buy another
I'm good for now. I figured after I owned it about 3 years I might look into an EV6 or something
I thought about selling my jeep because I definitely don't need it, but I like it and I'd probably end up wanting to buy another, and it'd be more expensive!
I'd feel better about keeping it long term if I could safely put it in the garage though >>
i wonder what an ev6 is
ohh
man that looks good up until the end of the back door
it kinda reminds me of the last saab 9-5
nah actually much better hood/window line
Think it also depends on the body color. Ones that complement the rear lights seem to look more appealing
Certainly an odd choice to have the tail lights extend all the way into the rear wheel well
Fisker ditched the sedan and now this is all they make? Meh.
Reminds me of a Kia Soul
Huh... Fisker had to stop production of the Karma in 2012 due to their battery vendor going bankrupt, which then caused them to also go bankrupt. Their assets were sold for a song at only $25M to a Chinese company who rebranded the car and started it again in 2017. I wonder if that means the new Fisker is the 2nd version of the company by the same guy then, or if it's technically the same company and they just lost all their previous assets due to the bankruptcy
lol I don't mind the light bar
yeah really. looked at inventory of local ram dealer for a promaster city and get fucked is the phrase of the day (especially if i wanted one with butt heaters)
I just don't like that rear end
errr hang on what i mean is I don't like the D pillar
I think it would've looked a lot better if they had continued the belt line to the trunk and painted the pillar black
admittedly it'd end up looking like a mini countryman in a way
but better
I never really liked the uneven top of the windowline on the countryman >>
too bad because outside of that I liked them...
like yea, for a minute at some point I did consider buying a mini
sheesh could the interior look any weirder
I think my favorite looking EV is the sony one >>
hehehe
they should make it have a large round oled screen
and then it could have a futuristic HAL style interface >>
I'm afraid I can't let you do that Dave. It would ruin your diet. Re-routing you to a more healthy lunch option.
A Sony car?
Also that full-roof glass would fry you in any area that gets a lot of direct sunlight
I dunno, I'm fine with some EV options not looking like they're from Mars
it does appear to have a HUD cutout in the dashboard though
sweet dreams!

this is kinda cool til those screens stop working
well except that center console is terrible what the hell
nobody needs storage in the future
pocket dimension console storage 
everything will be an NFT so it's good
drive through mcdonalds and they NFC your NFT to the console
i mean lighter interior is nice because it doesn't hold as much heat from the sun 
Question to the folks who knows one or two things about IT/Servers (because I dont and I'm interested):
What happens in the background when you're in a queue e.g. when Endwalker released and there was a big queue?
AFAIK, servers have a set amount of capacity to handle a specific amount of people. Even if they "chain them together", it's still a set amount of capacity servers can handle.
I'm going crazy about my new installed parts of pc, my pc's idle cpu temp is around 38-42 why is that xD, do I need to re put thermal paste ? or that might not help out
Why are chip factories called fabs
i7 12700k - Nocta d15, I think they are fine, and yesterday I was in peace with it, but today i'm kinda crazy about it, just worried that I didn't put good amount of thermal, or I did a mistake while installing the parts
I tried cyberpunk it was around 60-65, and just moments ago, tried minecraft and it reached 70 that's why I got worried a bit
and had lags fps drop on minecraft
1 or two fans for the cooler
2 fans
I didn't pay much attention to where fans air going tbh, and that's another matter that worrying me
i mean the temperature isn't awful, worst case scenario check the fans, and what mode you're using in the bios
i believe it has stock pl1 and pl2
pl2 will be towards the upper end of wattage limit for the d15 but should still cool it
I'm not expert on that matter, but there is one thing worrying me, let me take a picture of how fans installed maybe I did something wrong brb
its an intel 12700k
those temps are more than fine for it
yeah, it's not to worry about but if you want it cooler of course there are ways. overall it's fine though as you're not throttling and are still well within spec
what if cinibench test make the temp goes to 100c xD
it's not real world, invalid
idk about that
the chances of you stressing your cpu like cinebench is pretty much 0 unless you're doing specific workloads
cinebench isnt that far off
and unless you are suffocating your PC with whatever case you got, it shouldnt reach that high with a noctua
I feel like the airflew not right or is it okay that way
wtf
your fans....
never installed one sorry guys
this pains me
oh the red one ? it's shit but it's what I got :d
not that
what then
the orientation, the airflow is off
idk which direction they are facing but either you are currently sucking the heat up from the GPU, or you are blowing hot air from the CPU to the GPU and causing just a thermal mess in there
you want the fans to suck cold air from the front and push it out the back
so I point them left or right ?
yeah
oh fuck I knew I messed up
okay what should I do exactly ? xD I make the air blow right or left
i mean is that back fan exhaust or intake
it takes air out
okay then you want them blowing in this case towards that fan
alright then, I did it that way cause I was worrying that the big chunky d15 would block ram
but I hope not when I readjust it
i mean that's a concern in general with using large air coolers, it happens sometimes
that's why you pay attention to clearance and such before buying
true, will try to see how it fits now, brb
each world server has a player cap so the logon queue is a mix of waiting for a player to leave in some way (world visit or log off), and throttling logons. zones within servers are a good example of throttling player interactions through the congestion error
Me and my friend are not techy in any way and they're getting this error whenever they load up the game. Please help
error with intel graphics driver. either update from intel site, or try to downgrade (since xiv is jank programming)
We'll try that, thank you
Hey, the game runs pretty well on my desktop but I get constant mini-freezes. I'm considering moving the game to my SSD. Would that fix anything ? I don't know how common mini-freezes are in this game but that doesn't seem normal, haha
(if you need details, those mini-freezes happen even when there's virtually nothing happening on screen. They're like stutters and they happen even if I'm just looking at the sky, every 1-2 minute)
I doubt that's happening unless the game is constantly loading assets from your disk
Which might be happening if you have not enough RAM, maybe?
I'm unsure
Mmmmh
I'll check and see if that's the solution, the only way I found to somewhat fix it is to lower the game's graphics to the absolute minimum, no lightning, no shadows, bilinear filtering, etc...
And even then, it doesn't fix it completely
It's really weird, the game runs at 60 FPS but those mini stutters never go away
update, it turns out to be fine above ram, ye can't take ram off but it's fine, and now with cinibench test 3 mins in and not reached 100c, only tops 95c and currently doing the test, and it's at 83c cores between 83 - 93c
I could be in the middle of Mor Dhona looking up the sky, and they would still be there
Anyway, I'll try to move the game to my SSD haha
thanks guys, really helped changing the direction, it even looks better now xD
lol np

Those things are massive
You can adjust the fan up a bit if it doesn’t clear your ram
that
I had to do that with my D14
Yeah
Oh, also ! Is there a safe way to move the game's folder without literally breaking it ? I really don't want to redownload the entire game ^^'
They’re damn near silent even under load though that’s the nice thing
I don't mind a bit noise tbh but it's great not making it that loud
what I really hated when the fans were directed upward, they were steaming heat above on the desk and that reached my leg
and damn that was annoying
now problem solved xD
now if only gpus could be like that... if it isn't fans being loud it's coil whine 
oh and I ran out of thermal paste once I used the first dot on the middle @_@
that was scary, but a little bit left that I put on corners thought it's fucked but seems fine so far
Maybe stop buying inferior GPUs

that's on any gpu, including nvidia smart ass 

btw guys, do I need to add more ram to my build ? I have 3200 2x8
you'll be fine with that
I have another 16x1 ram but i'm afraid to add it
someone told me it's not good to add singular to kits
it isn't
why not tho ? xD
it'd make it single channel instead of dual channel lowering speed
so if I ever wanted to upgrade that, what should I do ?
It’s good that you chose nvidia though
buy 4x kit ?
buy another stick
They have 95 percent market share so they must be doing something right
just wait 

you can get by mixing and matching sticks but never do odd numbers pretty much
if I bought another kit another company, same speed would that work ?
Yeah
yeah
Your memory controller can adjust itself
oh ic, thanks u guys are better than most pc central helping groups lol
it might change timings but it'll be fine otherwise

LMAO
samsung
explain your work
I don't hate it
Kind of reminds me of a dessert thats sold here for some reason 

This is why we can't have nice things
So much for Valentine's Day present lol..... Guess it's plan B... Dick in a box.

Hope u didn't get porch pirate
Assuming that's exactly what I got
I have a box on my porch that locks immediately after the courier puts shit in
Sometimes they get their sleeve stuck in it and they have to wait for me to unlock it 
...
dont send deliveries to home unless it's a day you're there
There's a ton of foot traffic... but it appears to be just neighbors throwing parties for the super bowl
FIVE MINUTES!
and?
.....
that shit coulda been gone in 30

seconds
Shit can be gone immediately
ESPECIALLY if it happened to be branded box like newegg or w/e
but
sigh
someone's going to know that's tech pieces
next time ask them to require a signature for delivery even if you have to pay extra ¯_(ツ)_/¯
you're getting a replacement based on it being delivered to the wrong address, yet it was delivered to the right place, you just left it sitting outside
At those prices is it not on the courier to wait 30 fucking seconds
shipping co drops it off without a signature? they're footing the bill
You Americans are wild
All things aside... Amazon is going to send a replacement, but I have to wait for an investigation email or something first.
Weird... Right?
Not their job to babysit the packages
Just drop it off and go
It's literally their job to get the package to you idk
They did their job in that case
The only reason they'll have to wait is for signed release
Absolutely not lmao
to your address*
Otherwise dropping it off counts
I don't think Amazon does signed deliveries though
Hand that shit to me if it's signed release
Yeah ngl in the developed world we don't consider that delivered
they dont, technically
you can have them send it to a drop-off location at a CVS or w/e
Delivered to me is on my porch or in the box if it's unsigned release
Signed release but they just leave it there is undelivered to me
Here they only deliver cheap packages without making sure you got it
I'ma probably do this for the replacement
They'll ring your bell and wait
or they leave it with a neighbour
I'll fucking civil lawsuit their asses if they dropped off something signed release but didn't get my signature
Yeah they don't do that where I am
Canada
They just yeet it and take a photo
And send me the photo
Ups and FedEx and Purolator puts it the box and locks it
Amazon yeetus it somewhere on my porch
they will hide cheap stuff
but expensive things they either leave with a neighbour or do redelivery
keep it, wait a few days, then file an insurance claim

My neighbors cannot be trusted lol
Lmfaoooo
Signed release for me is always > 2000$
¯_(ツ)_/¯
it's Amazon's problem unless they put it in my hand
Pc parts always gets into the bin
Is your locking bin like... custom made? Or ordered somewhere?
this sounds like the UK is better at being karens than North America
Thank God EU law doesn't let couriers slack like this lmao
Courier cannot count it as delivered if it's not in the bin and the bin is registered as shut
unless it's Hermes
Leaving it on my front isn't a delivery
You guys can also fucking track the damn Amazon van and have same-day everywhere in UK
Yeah but it's still legally Hermes' fault
and then you have to abuse the retailer
Hermes just steal your shit and don't care
I can only get next day, not close enough to a distribution centre
That's not
AN M0P4
Ffs
There you go
Everytime I hear UK shipping this video plays
What are these used for? Can you connect them to USB ports on a switch to have networked storage without a full NAS? Or is it meant to just be connected to USB on the back of a server/workstation? https://www.amazon.com/Sabrent-Tray-Less-Docking-Station-DS-SC4B/dp/B07Y3WDHLD/
The Sabrent USB 3.2 4-Bay 3.5" SATA Hard Drive Tray-less Docking Station (DS-SC4B) is the PERFECT solution for all you docking needs! FEATURES • USB 3.2 Type-C port with up to 10Gbps transfer speed. • 4 x SATA 6Gbit/s 3.5” hard-drive bays. • High-quality aluminum for optimal heat dissipation and ...
Raid external drive probably
Well...s-raid
Maybe I should do that for my server then instead of trying to jury-rig a 3rd drive in the case, but that is a lot of extra money
lmao
I like the one where they throw the package in the trash
Polestar paid for a superb owl CM. Guess they want to go bigtime now
I haven't seen a "failed to deliver, please pickup" slip in years
usually UPS does that
honestly UPS doing that is THE WORST
they're sharing space with cryptoshits putting up a qr code for 60 seconds, i wouldn't call it big time
at least if the mail service does it, I just have to go to the post office nearby
when UPS does it, I have to go to some hub in the rough part of town at some arbitrary time of day and wait in a really long line
UPS doing that is "CS office open between 5pm and 6pm. Please pickup then." Gee thanks for the huge window
one time they told me to go to west sac at like 11pm

Fedex here is like Hermes
I've gotten some very fucked up packages from fedex
ontrac gave me the lols a few years ago. I ordered some candles and they were damaged in transit. the replacement package was also damaged in transit. Then one day I ordered laundry soap from walmart. Damaged in transit. Replacement was also damaged intransit.
there's stuff i don't understand, like people ordering a $2000 computer part or a tv or whatever and not having anyone home when the delivery is coming

ah yes, amazon's own drivers like doing that
if I were delivering for amazon
i'd try to take the picture with the package flying through the air 😄
Well they give them like 15 seconds per package to deliver so...
the thing that blows my mind is every delivery service ever will hand me the package if I'm waiting for it at the door
EXCEPT doordash
afaik they don't have a policy of "you must put the food on the floor" but all their drivers are assholes and love doing that
that's what you get for using a freelance delivery service
lmao so did they yeet it from the road?
LMAO
The roof is kinda safe
don't have to worry too much about someone stealing right?

damn it abdul
how the fuck
yeetus
When you've got 200 packages in a working day to delivery
And aren't paid enough to give a shit
This can happen
UPS drivers can make bank but its brutal work to get there
no but like that takes a strong throw
nah it just takes letting go at the wrong time

this is a really interesting video series if you're interested in science history or if you've got a passing interest in superconductors
https://youtu.be/nfDoml-Db64
In the year 2000, an unknown German postdoc set the world of physics on fire. This is the rise of Jan Hendrik Schön. Part 1 of 3.
Part 2: https://youtu.be/Riio1eKOSKg
Part 3: https://youtu.be/KsSuhP60qnI
My twitter : https://twitter.com/bobbybroccole
My Patreon: https://www.patreon.com/bobbybroccoli
All music used is from the Youtube Audio Li...
Looking for not expensive upgrade since I'm building a total new PC. I just want to renew old PC a bit.
CPU: AMD FX-8320-E
GPU: GTX750Ti
MB: ASUS M5A97 R2.0
RAM: 16 GB (DDR3)
@ me please.
600-700$? @dreamy chasm
What kind of use case are you refitting it for?
Upgrading the cpu/ram/mb seems like the first thing I'd do
Maybe slap an SSD in there if it already doesnt have one
@dreamy chasm I cant remember what case it is, all I know its silentium PC
Aready bought new ssd, there are 2 atm
cpu/ram/mb comes to mind then
maybe slap a used gpu in there if it's actually going to be used for gaming
8320e was sketchy as a cpu in 2010, it's even sketchier now
I would also proritize CPU/Mobo swap
Yeah
Should be doable with a combo for 600-700$
It's hard to recommend anything concrete since we don't know the use case for the upgraded pc though
Ryzen 5 gen 3, alright and as for MB what would you recommend? Im total greeny in this
any half decent b550
Some tomahawk b550 probably lol
let me check
Honestly? you can save money and go with a cheaper cpu
maybe a 10400f from intel or an older gen ryzen
They're plenty fast unless you're slapping a 3090 on there
Use one lol
The point is Im like amd person than intel so Id rather go with ryzen 😛
Cyan you know Intel, how is the 12700F?
Yeah but you have a low budget...not much room to wiggle with prices rn if you need performance
12700k benchied well, 12700f probably performs similarly
Only issue is power draw and heat on full load, but that doesn't happen to be an issue often unless you're pushing it with constant productivity tasks or synthetic benchmarks
Here is a 300$ ish 5800x
https://www.bhphotovideo.com/c/product/1598376-REG/amd_100_100000063wof_ryzen_7_5800x_3_8.html
Brand loyalty doesn't really do anything for you in the current market, I'd heavily recommend just considering other options
Just cursory search rn because I'm literally getting ready for work
Yeah, understandable
Aight I got you, thanks guys
5800x should be fairly good for 300$
Grab a decent Mobo and Psu while you are at it
Should fill up the budget and last you a while
it's going to be 550 usd for 5800x+b550+ram
That said
If all you're going to be using this for is light gaming, the 5800x is kinda excessive atm
Specially since the 750ti is going to be ur main bottleneck
I'll just assume they'll upgrade that eventually
fair
hm
I think the 12700f will end up being cheaper vs the 5800x
performs better too, so
zen 3/5thgen is basically obsolete now, price wise
Do not talk about my overpriced 3900x like that

Don't hurt it's feelings
Well, you still want to buy AMD if you have an older am4 system that you want to breath life into
But I'd recommend intel solely due to price unless you can get a good deal on amd atm
Alright my 1/2” drive socket collection is complete
I'm offend how you try to organize it but gave up on half of it hank
5800x might be a better deal if you can get a good b550 motherboard to go w it for 100 or so bucks
But all of the decent ones are usually 120usd+
[angy cheapass noises] (just got another extendable ratchet from harbor freight)
Brb gonna go break a toaster's leg and call it mommy
Have fuun.
I got this and I'm fine with it all things considered (3060 ti is a 3 slot cooler so the second available pcie slot is covered up and the x16 one is too fucking stupid to be usable with non gpu cards)
Inspired from architectural design with the extended heatsink for having better thermal solution; Lightning fast PCIe 4.0, high speed USB 3.2 Gen 2 solution, Core Boost, DDR4 Boost, Lightning Gen4 M.2 with M.2 Shield Frozr
issue here is that the b550m pro is a completely diff board
doesnt seem to have any vrm cooling
nice pile of trash u got there
@sharp kernel
Could also consider the 11400f+ a good B560 motherboard if you want cash leftover to spend on other upgrades
Check prices on Amazon below
Intel i5-11400F: https://geni.us/wklJbfL
Intel i9-11900K: https://geni.us/vTfqGog
Intel i7-11700K: https://geni.us/rr30
Intel i5-11600K: https://geni.us/u1kz3
AMD Ryzen 5 5600X: https://geni.us/6Av8sj
AMD Ryzen 9 5950X: https://geni.us/dAWM8rr
AMD Ryzen 9 5900X: https://geni.us/IocY2Qn
AMD Ryzen 7 5800X: https://geni...
LMAO
Ur a nice pile of trash
11 series?
maybe time for go bed
yeah, 11400f+b560's still good value rn
12400f+b660 is worth considering too
Sorry was a cat hair on my chest
I’d go with 12 series
Only issue w 12th gen is that decent b660s start at 140 bucks or so rn
But I suppose that isn't much more than b560s or b550s rn
H610 might be an option?
I’ll toss you 50 bucks
God, please do
Don’t settle for 11th gen
I want to buy fantasias
Ill go elezen for a week if you get me a three pack 
LOL deal
LMAO
ah fuck
I just realized that i need to resub soon 
well, I have a week and a half or so
also, not bad 
BEAST OF A RATCHET
Doooit
I’m still on a 6700K lel
im fine with my system as is anyway
based
Anyways
Im off to go grab a bite and then go sleep

Wait, were you serious about the Fanta pack
@deep sapphire

Well I was more thinking of helping you get the board

Was just sifting through options for the guy who hopped in here earlier
I'll take 50 bucks, though 
New keyboard time?
yeah, going to get that kit/keycaps and then go from there

Don't say those words around me
you know you want to

Planning my room out rn cuz I wanna nuke the fuck out of it
I need to figure out my monitor stand situation
Hopefully it doesn't end up like this
....
More like this probably

R u calling me out cuz my desk is like that but worse
Organization is a sin and I shall not commit it!
i mean sarah is likely to have that if not worse
That mouse and kb height diff would bother me
Assuming the user is an eng or programmer they probably use windows for very little things and then use a tiling manager for longer code sessions so a mouse would be used for much
😔 everybody uses it now
Workstation & desk are the same but my second table furniture is a tea brewing station.
Fair, sarah
UwU
I hate this
Sarah those 2 pics of desks that you posted
They pretty well sum up how I think of you
Dangerous nerd by day, pretty little princess by night
I am a safe nerd
Customizability
Not everyone wants a shitty corsair board with most of the cost frontloaded into marketing and the rgb+software
?
was a joke lol
I'm in Asia, shipping would be twice the cost of an actual board
an attempt at humor
Ah
"Asia"

smh
They’re making me take a college course on food processing. You all aren’t safe
Just remember the next time you buy canned corn or peas
We make most of the brands

good thing i buy bagged

https://www.keychron.com/products/keychron-q1
https://en.akkogear.com/product/akko-cs-lavender-purple-switch-45pcs/
https://kbdfans.com/collections/keycaps/products/cherry-profile-pbt-blue-gray-dye-subbed-keycaps-set
https://www.amazon.ca/dp/B09879LT8Y
Keychron Q1 is a fully customized 75% layout mechanical keyboard packed with all premium features and unlimited possibilities. Q1 is an all-metal keyboard that allows customizable capabilities for every key switch, keycap, and stabilizer. It’s made for your personalized experience and a more comfortable typing experience.
45 pcs per pack; 3 pin and fits keycaps with standard MX structure; Shipping price is not included for the listed price and will display at checkout.
SPECS Material: PBT material Profile: Cherry profile Production Method: Dye-sublimated Total keys: 112 keys Weight: 340g Thickness: 1.35 mm Friendly Reminds: Only keycaps included, no keyboard Compatibility Cherry MX switches and MX-style clones 63/64/67/68/84/87keys
Nah it’s safe, the FDA does audits randomly
Go for it
Sarah buy the Dell QuietKey
Hank buy the harbor fraught driver
IT WAS A JOKE
Bauer drills are decent enough
YOU SUGGESTED ME A POS, I SUGGEST YOU A POS
ford truck weeb
Chevrolet!
I don't have enough coffee for this lol




destroyed
