#technology-discussion
1 messages · Page 226 of 1
maybe it make my hands softer
No that’s what the working hands lotion is for
Every mechanic has a thing of that in their toolbox
Prove me wrong
I love that shit
Support me on Patreon:
https://www.patreon.com/der8auer
Music / Credits:
Outro:
Dylan Sitts feat. HDBeenDope - For The Record (Dylan Sitts Remix)
Paid content in this video:
- Seasonic Spot, Booth Tour
Samples used in this vid...
bahahaha the task manager
thats great
i thought it was a task manager with CoPilot(tm)
Just put CoPilot in charge of managing system resources, this can't go badly. AI-driven pid kills.
All I hear is we should replace CEOs with AI
Suddenly AI isn't that a good of an idea, huh?
how long have we been in the situation where Full HD is the baseline and 4K is the high end
feels like that hasn't changed in a long time
just is no reason to go beyond 4K
because we have only recently hit cards that can push 4k at high frame rates and refresh really
1440p is only now becoming a standard but just barely
you mean play cyberpunk 2077 with full RTX On at 4k 😛
WTF I THOUGHT IT WAS ALWAYS BEEN THERE?????
Uh I don't use an ipad for like 6 years till now but then I even not know thattttt
They got rid of it for zero reason
On the average monitor size yeah
big TVs and projector screens it’s not a bad idea to go above that
And for new triple A games there’s like 1 gpu that can actually run them well at 4K without upscaling rn
Ahhhh that’s better 😌
FAT MAX
Only the finest!
Why does Toyota barely have any wards 10 best awards
I figured out why every new M3 is a Competition
the base M3 is manual only
to get the DCT you have to get a Competition
This guy that was heading up another project at my job is shifting over to being the senior engineer over me and he's pissing me the fuck off
Everything we do is in company timezone and he told me a meeting time in my timezone while booking me for 2 separate meetings at the same time
One of which was double booked against one of my existing meetings with him in Teams
So I didn't fucking see it and was thinking oh I have until 10 to get this done cool, right on time
So it's not ready for that surprise meeting and he lit my ass up for it for no reason
That's annoying af :/
He's been in his own corner with his project so he doesn't know how the company culture is and pushing my thing an hour for deployment is nbg at all
I hate it when someone gets some amount of power and they immediately turn into Il Duce
But he's been micromanaging tf out of me the past 3 days and cross-checking everything I do and making me justify and explain everything to him
oh god one of those managers
Which ironically wastes a lot of time I could be doing actual work
Shinon I just finished updating my resume, you should do the same
let's both find new jobs 
I showed afk for like 25mins bc I was on this laptop looking at the slack channel for a vendor of ours for help
And he literally asked for what channel I was in and when the thread was from etc wanting to verify I wasnt lying
Absolutely deranged.
he is wasting so much of his own time doing shit like that
he's a seagull manager
comes in
screams at everyone
shits all over everything
leaves
the only reason why I've lasted this long in my own job is because my own manager is a chill guy, but there are many other reasons why I'm looking for a new job
if he was like that I would've quit a looong time ago
if you want to salvage the situation you could try talking to him and setting some boundaries
but tbh it might be wise to prepare your resume
there is a good chance the reason why he was changed to your project is because the previous project didn't work under him
Nah their current one is finishing is why
He seemed really chill before now so it took me by surprise and Im hoping once this particular project is done (which is today) he will be better bc I can set out dates with him for other stuff
This job is wild I have to use a nail gun to put this end cap on but I have to spread the work piece apart precisely and the only way to do that is with my hand pushing it over and then using a nail gun within a quarter of an inch
That’s so safe I had one splinter out the side already
I LOVE that description
reminds me of a term in aerospace "tiger team"
when a project is behind schedule they 'send in' a group of people to.. be seagulls really
ultimately it's just to shake loose any process issues or team issues that are slowing down progress
I've seen the seagull manager thing shake out almost exactly like that before though
@modern iris you can ask about the different models you're looking at here, lots of knowledgable people in this channel 
(this person is searching for a gaming laptop with a budget of ~2k)
Thank you so much - I did not know this existed
from bestbuy
Shop Best Buy for electronics, computers, appliances, cell phones, video games & more new tech. In-store pickup & free 2-day shipping on thousands of items.
(Here is the link)
kinda extremely sick so just doing a cursory glance rn
Thank you so much, I will check it out
seemingly a decent ish deal, best buy usually marks up stuff
but a deal ish to my eyes, not too familiar USD pricing
I can always watch for discounts for a bit as well - they do discounts so often
I added it to my cart - we will see
I was actually looking at this one too (the one you sent)
ye g16 is fine
Which one would you recommend, first one or second one?
so
I hope that you feel better - thank you so much - again
full bias warning
Asus is not doing well in the public eye for Quality and other dumb shit
and legion has been doing phenomenonal
for the past few years
I would go with the legion
Perfect, thank you
I'm pretty sure that processor is a good chunk better too
Sounds good
just more power hungry
I just liked the g16 because it was a bit lighter
but lenovo looks good + I love the color
I usually rec legions to everyone and my clients
I'm even using one so
tbh the weight thing is gonna hefty either way due to the size and it being a gaming laptop right
both are fairly slim so backpack will be fine
I will say the display on the g16 will be MUCH better
it's OLED and 240hz
I wouldn’t buy any laptop with an i9 in it
so that's the other reason to choose that
both laptops have adequate cooling solutions
They don’t
and have good track records
I literally have two in the workshop and have bought them for clients
they are fairly common models
If u think they have adequate cooling for a 14th gen i9 you are delusional
It’s just a bad idea
Also on top of it considerably less power efficient than any of the AMD ones so if u do ever want to use it on battery that’s not great
are we going to fall out again about your tone?
No
might want to shoot Sarah an apology then, volunteer staff don't really deserve or need that attitude
Thank you so much for your time
I really appreciate it
np np <3
yea yea, then cyberpunk 2 and gta 6 come out as windows only and everyone eats their words
I am not sure any linux people really believed in 'year of the linux desktop' lol
see the fundamental issue is, a windows alternative would have to be unquestionably better at everything for even the dumbest person
Apple, one of the richest companies in the world, couldn't convince people that MacOS was better than Windows
And I say that as someone who does use linux and Macs and hates Microsoft 😄
Business people want Excel and Microsoft's domain controller/365/exchange/active directory crap
gamers want directx
Do you recommend if I hold off just for a while longer when I am permanently settled & invest in a gaming PC (I'd have more than enough savings by that point as well), it would be better?
I just don't like PC's because they are so not portable
I had a really good PC that I ended up giving away because simply I couldn't take it with me (it was too big and heavy)
next gen portable x86 cpus are goung to be real nice but it's going to be a hot minuet before they result in notebooks
that lso doesn't help in term of dedicated graphics
2000 bucks though you should be able to get a lot more bang for the buck :/
4080 kind of big gpu bang
(jurt turn the overclocking off, elevate the back off the desk for air flow and it should be fine. if noisy)
Thank you - in terms of work then - would the asus be better since it's battery is 10 hours (not gaming just work like word documents, pdf's emails etc)
That way, at least I can benefit from the asus as being for work if I decide to later on buy a PC
I really like the lenovo legion - but maybe the asus would be more work friendly?
the asus is going to have much better battery life outside a power adapter
not 10 hours but 8 hours should be easy
maybe 9 hours
Perfect thank you - I think I will go with the asus then
lol
double lol

Pretty sure it’s illegal to leave the pump unattended but whatever people do whatever they want in this city
reminds me of winters when they would have cars idling and unmonitored and wondered why they got stolen
I'm American - but I've been abroad for study/work in the UK for almost 6 years now. This year is my last year (but I'm back in the US for 5 months) After this year, I will finally learn how to drive because the UK drive on opposite sides of the road
I'm kinda scared to drive if I keep seeing irresponsible drivers 🤣
Have the patience to sit in ur car for a few minutes tbh
No I’m gonna pump my gas and then walk inside the store because I NEED my Starbucks iced coffee
im not sure if its because im old now or people are just genuinely really stupid now days
I think modern vehicles give people a false sense of security so they dont take driving very seriously
we need rattling death traps again
Anyone stupid enough to spend money drinking that deserves their car to be stolen
I think too many people drive cars too big for them now atl here
also I cant blame anyone that wants remote start it gets to -40 degrees here in January
They shouldn’t be in an SUV when they can barely drive properly
It’s like -10 in winter here
you know its bad when you gotta plug in your engine heater at night or your car wont start
So it’s just sit there for a while
The worst part is getting ice off and waiting for windscreen to clear up
Fargo (1996) - A Finder's Fee Scene: Jerry (William H. Macy) asks his father-in-law for a $750,000 loan and is denied.
BUY THE MOVIE: http://bit.ly/2hg9Oq4
Watch the best Fargo scenes & clips:
Fargo Best Scenes playlist: http://j.mp/1znrtgl
FILM DESCRIPTION:
Filmmaking siblings Joel Coen and Ethan Coen both embraced and poked satirical fun at ...
true
Waiting 30 mins for the ice to melt so I can drive
Idk if it’s any better with new cars either
if you're really lazy some 93 percent isopropyl alcohol on your windshield will thaw that shit right up
True
I normally am up early enough where it’s in my driveway I can leave it running
It’s not on a main road or anything and camera can see it anyway
also if you park outside wax your car before winter time it helps a lot prevent ice and snow build up so you arent spending 15 minutes brushing the shit off
Luckily doesn’t snow much here it’s just ice for a couple months a year maybe
I actually need to buy stuff to wax my car anyway
I’ve been saying that for a year tho
thats the spirit
thats all car projects in general
buy the parts
sits in the garage
8 months later
maybe get to it
and then the shit doesnt work but you cant return it

Lmao
I don’t have any parts now bc I fixed the gearbox mount
Idk how I was living with it how it was before tbh
I haven’t bought wax or cleaned my engine bay still
nice loud clunk when you put it in reverse
It took me 2 months to get round to washing it
Nice loud clunk when u do ANYTHING
Lmao
It felt horrible as well it was like u were crunching through gears even if u were shifting fine
wanna hear a ghetto trick to make your own bushings for mounts
buy some of this
then inject it into the mount bracket
let it cure
there you go

Lol
It’s not expensive to just replace them tbh
Nothing on my car is ever expensive and it’s not unreliable so I normally don’t have to do anything jank to fix it
Now I’ve said that I imagine everything that is about to go wrong will go wrong within the next week though
ya i don't leave my car gassing up but I have gone inside and left it parked there after filling up
only in quiet gas stations though
doing that in a busy gas station is rude fa
Pull part out of box now it’s store credit only on return
thats completely normal
im just going to assume she spaced out and forgot to return it
because nobody can possibly be that stupid or naive
thanks dorman
I refuse to buy dorman shit after my idler tensioner failed after 8 months
you know, something that should last 10 years
AMD Ryzen 7 7800X3D officially faster than Ryzen 9 9700X Don Waligroski (AMD) confirms the difference will be smaller than expected, but the current-gen X3D CPU will be faster. Perhaps this is why AMD is rumored to be launching its Ryzen 9000X3D series much sooner than expected. The latest rumors suggest the new X3D desktop […]
AMD really doesnt want you to buy these I guess lol
idk why they're bothering with non-x3d
at least when the 7000 series came out it had some pros over the 5800X3D
I mean it kind of makes sense to not want the new non x3d CPUs to surpass last gens
It is basically their most notable product
When the 7000 came out it was only as fast as the 5800x3d and that was a much bigger jump
7600 and 7700 are very similar in practice
i don't really get the point in that lol
because then people will hold off until the next x3d
Plenty of people who don't care about the gaming performance and plenty of companies that will still slap those into gaming PCs and plenty of people with little knowledge who will pay more for worse gaming performance
fwiw
the mid tier cpus end up being some of the better chips you can get at their price points once the platform actually matures
Idk I see it as AMD still looking at the enterprise side of things
A million and one bad prebuilts for gaming or business use can use these chips
I imagine the 9600x will still be cheaper than the 7800x3d as well
It’s $400 at msrp for the 7800x3d
Imagine buying a 6 core CPU in 2024

Also good morning technology my body aches
@hard drift
People gaming don’t care
And probably won’t need to for a couple years still
Although I think the 9600 probably should’ve been an 8 core cpu
I asked them to fix this light and they said they have more important things to do
Yeah work by candlelight bitch
Lmao right
I knew you loved dewalt
smh

Fuck... They're installing wood flooring or something upstairs so it's constant rolling and shuffling sounds then lots of pounding then vacuuming
Left arrow go brrr
any of you have an idea why I would get partial data from a powershell cmdlet randomly
I think that would just make me stop using Youtube tbh
I've got a script that invokes Get-NetAdapter and some days it returns all data, other days things like the mac address, interface alias, and IP addresses are blank "" yet the state shows they're still connected
It's running on a few hundred hosts and some of them will go an entire week with no full data, some others 1-3x in that week it will be full. The day it works varies by host as well.
Checking error logs and see nothing out of the ordinary
I get google needs to make money but if they are gonna do this they need to regulate who can show ads because I’ve heard so many people get nothing but crypto scams and shit
Google only cares about money
CRC Brakleen brake parts cleaner is non-flammable and formulated to quickly and effectively remove grease, brake dust, brake fluids, oils, and other contaminants from brake parts, lining, pads. CRC is a worldwide leader in the production of specialty chemicals for the maintenance and repair profe...
@potent arrow
thats a pretty good deal for a large can
some of these reviews sound so fake lmao
In summation, the CRC BRAKLEEN Brake Parts Cleaner stands as an irreplaceable asset in the maintenance of my electric golf carts' brakes. Its non-flammable nature, efficiency, and impressive cleaning power render it the definitive choice for those who take golf cart maintenance as seriously as I do. Whether you are a fellow golf cart operator or a vehicle maintenance enthusiast, this product is a must-have to uphold the safety and peak performance of your electric golf carts.
who the fuck says "in summation"
LMAOOOOASDASD
I've noticed that the video player is broken by the preroll ads half the time now because of the changes to the ad system (no time stamp, can't seek)
Jjfwiifiwsj LMAOO
Take out all the lights so it becomes a safety issue and they’ll have no choice but to fix it 
lmao ikr
vehicle maintenance enthusiast
peak performance of electric golf carts 
i'm sorry but i was picturing the golf cart scenes from "Jackass" when I was reading that 
yea chatgpt gave me something similar but not as funny
As a vehicle maintenance enthusiast, I recently had the pleasure of using EZBake Brake Cleaner on the brakes of my electric golf cart, and I must say, it exceeded my expectations. This product is incredibly effective at removing dirt, grime, and brake dust, leaving the components spotless and functioning optimally. The fast-drying formula ensures that there's no residue left behind, which is crucial for maintaining the integrity of the braking system. Additionally, the spray nozzle is designed for precision, making it easy to reach those tight spots. Overall, EZBake Brake Cleaner is a top-notch product that delivers outstanding performance for electric golf cart maintenance. Highly recommended!
I feel like it would be easy to write something much funnier
Here's another shot at making the AI funny:
As a Southern alligator keeper who enjoys a stiff drink and a smooth ride, I gotta say, EZBake Brake Cleaner is a real gem for my electric golf cart’s brakes. This cleaner slices through grime like my favorite bourbon cuts through the heat, and the fast-drying formula leaves everything clean as a whistle. Plus, the lavender scent had my wife thinking I was stepping out on her—until she saw how spotless the brakes were! Highly recommend it, y’all!
Is this a good minimum frame rate or should I change a certain setting?
what are your specs
ad blockers go brrrr
I know there's a settings page that shows all the specs. I forgot how to access it 
gimme a second to find it
that seems fine
good
Also and I'm not sure if this is SE fault or mine, but I was getting fps drops in certain scenes despite the score I got
thats just normal
ok phew
yes
where it feels like the game stutters or pauses
yup!
that usually means the game took too long to draw the frame causing a massive frame time lag spike, could be anything from slow hdd to older computer just being normal in general
honestly if your current setup plays it fine its not gonna change much
Tfw you know it means hours but hope it means minutes
chkdsk?
Yep
I mean, when I built my computer, I was taking reference of the recommended specs for DT. I'm pretty confident it will run well, but I was just trying to make sure
Crystaldisk showing at least 100 bad blocks

And of course windows is dumbfuckery enough to willing write to them
SSD?
So now D4 crashes every time i go to character creation
Yea, sandisk iirc
Not even sure if it’s under warranty anymore
well the good news is its extremely rare that even if the writes fail reading from it rarely is an issue
so you can still access the contents
Depends on how bad the failure is
sata SSDs are pretty cheap too so might as well just replace it
True
I wouldnt even waste the time trying to fuck with it, just get a new drive and clone it
Though tbf if it’s not a total write off once it’s replaced a zero-write might be enough to mark off the bad sectors so it’s still usable
I’m hoping chkdsk solves the problem for a month or two
I already burnt $400 yesterday on my car
My computer can limp along for a little bit
You know what the fucking hilarious thing is hank?
My OS install is on an ancient as fuck hitachi deskstar 120gb hdd
And it does not give a fuck how old it is 
Did you get frame skipping in your test?
no
because Hank owns a 4090 😉
Oh good, I’m already down to just 3:40 left on this
things you can check, make sure your SSD/HDD isnt going bad or is slow.
Make sure you are using XMP on your memory
make sure your shit isnt overheating
But… i like jalapeño poppers
from my experience its rarely the GPU that causes frame spikes, its usually ram/hdd/ssd
Do you think I will have frame skipping when DT officially releases?
no idea
Fair. Not sure why I assumed you would know xD
its kinda hard to say because we dont really know what the game will entail. a benchmark is literally what it means, a benchmark for your computer
its supposed to stress test it in situations that are unlikely in the real game
but if you do have them, then try those suggestions above
specially XMP, its not on by default and you leave a lot of performance on the table
@deep sapphire https://x.com/HardwareUnboxed/status/1801081145679069539
no fuckin way
WELDING AI
Alright I turned off fullscreen and instead borderless windowed and I actually had no frame skipping
https://www.dewalt.com/product/dck299d1w1/20v-max-xr-hammer-drill-power-detect-tool-technology-and-impact-driver-combo-kit AI is just DEWALTS(TRADEMARK) 20 VOLT MAX**(BULLSHIT) WITH PATENTED POWER DETECT TECHNOLOGY
Expand your system with versatile 20V MAX* tools powered by innovation. This kit includes (1) 20V MAX* XR® 1/2 in. 3-Speed Hammer Drill and (1) 20V MAX* XR® 1/4 in. 3-Speed Impact Driver. Developed with innovative POWER DETECT™ Technology, this Hammer Drill/Driver recognizes its battery and adjusts its power output accordingly. This kit also inc...
do you have a lot of shit running in the background
damn ur computer sucks bro
Unless you're referring to task manager as well which I didn't touch
Christ i hate how long this takes… still another 2:30 to get 
Alright I'm just going to wait for full release then because I def reached the recommended specs for it. Thanks for answering my many questions 
can the smart people of this discord help me
whenever i have my huion drawing tablet connecting and mirroring my screen my colors get desaturated asf
mirrored
main only
god it doesn't pick up in screenshots
im losing my mind
HDR settings probelly.
*probally.
The Huion likely doesn't support HDR, and windows likely has it on, the mirroring would disable it.
Or the inverse, which is what happens with my monitors. Turning on HDR makes everything giga-washed out. xD
dont think my monitor supports HDR
Yea…. It might be time to pick up a new ssd on my next day off…. Barely halfway done with chkdsk’s sector recovery 
where do you see this ?
like where the log file ?
Go to the folder where you extracted the benchmark files, and there should be text documents listed there
thats strange, theres nothing there for me
did you save it?
perhaps theres some setting in benchmark I turned off or the sort
oh you had to manually save it ? I mustve missed that 
i'll just run it again then, thanks
oh yeah I recently got a new laptop and my score was around 16k, game itself seemed to run fine in the benchmark too 
I was just curious of my actual frames which is why I asked 
as long as the 1% low isnt too far off from the average you're all set
this is the recommended specs. My pc is right on the t hehe
Wait… how is the minimum gpu still from like 1998?
thats a 2014 card

970 my beloved
Probably because they had to make the compromise for the latest gpu at the time during ARR to allow as many people as possible to play. In other words, I think it was probably a rushed choice at the time for them to pick that card
Jokes aside, i ran a 1050ti until last year when i finally upgraded to a 3080
I hope what I said makes sense lol
Me too, but I instead got the 2060
I haven’t seen many games with a 10 series as the min gpu fwiw ¯_(ツ)_/¯
Actually, looking at some quick info, it’s because that’s the oldest card that supports dx12
oh my
Blackmagic Design has announced the Blackmagic URSA Cine Immersive camera designed for shooting spatial video content for Apple's Vision Pro headset.
The URSA Cine Immersive camera features a custom stereoscopic 3D lens system with dual 8K sensors, capable of capturing a 180-degree field of...
5 units total will be built
i'll take it
4060
i love Asus' bluetooth controllers. i love how there isnt a single fucking device i can connect to
unless i hold it right at the motherboard io shield
he rolled
jsyk the wifi attena on the board also works as the bt attena
i know
but also windows Bluetooth

also ffs my cable for my display tablet is too short now to connect to my PC, so i thought i will just buy a long USB-C cable because this thing is technically able to be used via just USB-C instead of USB-A + HDMI.
but guess neither my gpu nor my PC are able to deliver enough power for that, because it doesnt even turn on :/
ah for fucks sake
usb c pd kinda should cook well for that
its because for some reaosn i have to use the top USB-C port on the tablet if i want to deliver signal and power at once, but the top port is so tiny that only their specific fucking cable fits and a longer one is almost 70€
bottom port, which is bigger, fits my standard anker usb-c cable, but for some reason only allows for data transmission but not power
wdm tiny?
does the jacket interfere?
grab your hobby knife and shave it down
it's just a bit of rubber : P
yeah the jacket
just shave it diwn
both looks like standard usb c to me
just trying to grift a specialty cable from you
Im glad my current mobo has an external antenna for wifi/bluetooth. I never have issues now
welp still doesnt work. nice

give me the tablet model rob
I'll look during the conference for you
I'll be bored out my wits
huion kamvas 16 2021
now im getting it to turn on via usb-c, but no signal, no matter if connected to the gpu or mobo or whatever
kk I'll check when I get to the meeting
Oh yeah everyone hates these for the connections iirc
I have the older one where u can’t even use usb C like that and only their proprietary one works properly
U might be able to find the solution on Reddit tho bc this kind of issue isn’t uncommon
turns out my usb-c cable does not support transmitting videosignals
ah what a mess
ordered one now but it wont be here before saturday.
but still fuck huion for only including a less than 1m long cable with their tablet
that's usually for power charging
if the cable is too long, it has too much resistance for power charging
ironically only the cable specifically for external power sources has an extension cable included
HDMI and the data-USB-A do not. and neither has the usb-c cable that goes into the tablet in the end
Then she picks up her twin brother HDMI
other engineer says he fixed the cloned log events issue a couple days ago
run a search for log_level=WARN and find out all he did was change the forwarder config to drop cloned events if its ingest queue was full, not stop the events from being generated in the first place
Hmm
https://youtu.be/0JMuZ56BQyE?si=eDe_yzOhvUUfPU5a @deep sapphire how tf did they get the Cadillac Le Mans car for this
Race Car vs. Road Car! We race the Cadillac V-Series.R (LMDh) versus the Ferrari 296 GTB with Asseto Fiorano package, the McLaren 750S, and the Porsche 911 Turbo S (992.1) through the 1/4 mile — including a roll race!
=
This episode is presented by Valentine One Radar Locator: Find radar before it finds you https://bit.ly/Valentine1_Hagerty
Cl...
I dunno but it’s sexy
apparently it was Mobil 1
lol
so they had the full Cadillac racing crew out to do this
and yea in a roll race there is nothing on the street that can beat the cadillac
the hybrid mode requires dumping the clutch for the V8 to drag start so it loses acceleration
and the only reason they use hybrid systems is fuel efficiency during the races and then also its the fastest way to get up to pit speed so you can get out of the pit faster
Doesn’t the corvette e ray use a similar system
yea
it doesnt clutch dump tho
the clutch dump is super rough and you will just lose traction
the e ray actually matches the rpm's of the motor to the V8 then starts it as soft as possible cause obviously you dont want an instant full 3500 pounds on the driveline under a hard load
whaagstshdjrjdjd
I mean, that's because it's not sending the video over the serial data connection-ish.
There's lots of power-only, 2.0 data-only, and non-side-channel USB-C <-> USB-C cables out there.
it may have still fixed the issue though, since i can actually load until D4 how
that thing is dead
“Rotation rate”
That’s a mechanical drive
You need to transfer the data off it now
That’s A LOT of bad sectors
Yeah, that's a wholelotta not-good.
if it dies it dies, i have nothing to move data to until next payday anyways
it's also fucking hilarious that it's apparently so fragile too
Not all mechanical drives are bad but seagate sadly had a period of time with shoddy quality control
the hitachi drive in here is a decade+ older, has higher C5/C6 failures, yet CDI still says drive's healthy
¯_(ツ)_/¯
Health status is based on SMART status.
It's not auctually representative of if it's good or not.
And it's up to the drive to say "Oh hey, I'm having issues"
That drive has no errors.
When you see “reallocated sectors” that literally means parts of the drive are essentially ruined for good and your drive is moving that content to another one
When you see a lot of those
fair
That means that drive is toast and is near complete failure
Mind you, 900-ish bad sectors on a spinning disk could be just a bad chunk of a track, but yeah, it's good to start looking at replacements.
oh i am, but getting my hands on one is a "next payday" problem, not a today one
i already burnt a paycheck on my car tuesday
Which would be "oh, this is dying like now."
Yeah
i'm annoyed at how expensive car batteries have gotten in just 3 years
Supposedly they had a year of really shitty ones too
otherwise i'd have been able to buy two SSDs as replacements without any issues
2021
I'm trying to find a weird size battery for mine, :/
on the plus side, my motherboard does actually support nvme drives
so i'm not forced to try and find 2.5" form factor ssds
sadly my only real choices for nvme drives are samsung evo or crucial
Yeah if that’s your primary drive you use for gaming and what not you would benefit substantially going to an nvme drive
Just bring it into orileys
They gonna charge you a core fee if you don’t at any place anyway
ngl though, i'm seriously impressed that the hitachi drive's actually still alive
Yeah she has some miles on her
112k hours
I’ve seen mechanical drives from the 90s still work fine it just depends
Like I said above seagate for like a 10 year span had seriously bad QC with their consumer drives
It's a ln2 size from japan
4,667 days, 12.79 years of active service
have fun paying more in import fees than the battery actually costs

It's super not standard here, there's a couple that are likely-ish to fit, and I might look at just ripping out the one in there.
Works for me.
Not like it needs CCA in my case. xD
It just needs to close the contactors long enough to boot the traction pack up.
Walmart sells pretty decent batteries for cheap
looks like H5/LN2/47 are all sameish
I think they offer 3 year warranty too
I'll have to check, I think mine's more narrow, but I only gave it a brief look.
Thanks for the point in the right direction tho.
What car is it
nissan?
wtf is rhat
Subaru's EV./
oh, have fun with the markup
This thing literally just closes the contactors, buffers the 12v system, and doesn't charge when it's plugged into a L2 charger. xD
An EV using a lead acid battery. 12v auxiliary?
Yeah, it's an aux.
Pretty much every EV uses one for booting up.
It doesn't charge when you're plugged in, as the DC -> DC converter from the traction pack isn't activated, but the screen in your car is on while it charges. xD
Tesla converted their 12v to 48v didn’t they
Which is what killed mine, it's working well enough if I drive it every couple days, but I'd like to get ahead of it.
I thought they were looking into it, did they finish it?
No idea tbh
little cheap 12v solar powered maintainer?
They use pretty thin wires which I’d assume is from being able to run at a higher voltage
Those things charge so slow it’s almost pointless
Same with battery maintainers
I had one it took all fuckin night to even get enough amps to crank the motor over rofl
The real answer is to just unplug the car when it's done charging rather than leaving it tethered to my house.
My issue is one of my roomies decided to plug it in after I'd unplugged it and I didn't notice for a week.
Honestly that’s kinda silly though that seems like a common enough situation
Like what if you didn’t drive for a few days and left it charged
That's usually fine.
i feel like that's a failure of the charging station design too
EV bros not good…
The issue is that the charge cycle turns on the screen, which is ran off 12v, and 12v doesn't charge until the contactor's on.
Better stick to the Chevy small block
It's more a failure of the way charging happens. xD
like if it's fully charged up, kill off the charging cycle until the plug's physically removed and put back in
Essentially, the charging is only designed to load up your traction pack, either AC in or DC in.
rinse/repeat
You should report that to NHTSA and Subaru that’s such a stupid failure point
Not a bad idea tbh, I'll have to check and see if there's any firmware updates, but I haven't got notice of one either.
I’ve heard Subaru USA is pretty decent about that stuff
I've never really had an issue with them, and the battery's not utterly dead, it contacts fine, I just have to be more careful about it.
Which part of that is I just don't drive enough.
also I dunno why I didnt suggest this earlier but couldnt you just ask your roomate to give you a jump
at least enough juice to get the system energized
I did.
It just drained the battery enough that it's unhappy taking a full charge and holding it.
I've got the self-jumper in the car in case something happens, I just prefer to keep ahead of things.
lmao wtf
Lead-acids are already unhappy enough in 100+ degree heat, you're lucky to get 2-3 years out of a nice AGM out here.
AGM are typically more reliable than older lead acid type cause they are designed for multiple small loads
but fair I guess
I dunno that car is too new for an OEM battery to fail like that
you got bumper to bumper warranty?
probably get declined because "user error" or some stupid shit
Yeah, I've considered hauling it to subaru, but every report I've read is that getting that 12v replaced (I'm not the first person this has happened to, unusrprisingly), is a several-week wait at the least.
As it is, I'm just watching the charge time more closely and taking it out a bit more.
supposedly this forum poster said subaru had an update last year that will automatically shut accessory mode off if no activity is detected in 5 minutes
next time I buy a battery im ditching the fuckin old GM style and converting to a top post battery
god I hate the screw terminal GM bullshit
THEY ALWAYS FUCKIN STRIP OUT
What do we think of this? Mind you, I am PC illiterate never having owned or needed one before but I kind of want to make the switch from console. This was suggested to me:
LOL
it's fucking 2024
and we still have shitty lead acid 12v batteries in cars that die if you look at them funny
actually what i'm most impressed about atm is the batteries in my jeep still work lol
seems for most people on the jl wrangler forum, the oem batteries die arround the 2 year mark
... if you're lucky 
no idea who MXZ is but the specs are fine
might wanna upgrade to a larger hard drive in a later date, can always add onto what you already have
there's a lot worse choices than that (newegg link). there's one system I found that could be better but the motherboard on it is really cut down to a price point so I can't recommend it
lmao
AI POWERED PERFORMANCE
honestly mobo features on a pre built probably isnt a deal breaker
they probably wont even enter the bios once
though hopefully EXPO is enabled
yea whenever you see naked VRMs, wow
getting really tired of the fact you have to turn the shit on in the first place
hopefully yeah
"its overclocking" yet they advertise the speed with it on
yeah, no
its probably not a huge deal being those can handle 120c comfortably
but
tit for tat
just buy whatever you want either is fine
yea the whole thing about motherboards

i haven't used a cheapy one in a while but
the quality on cheap boards looks fine to me?
and I think the difference between a bottom end board and a mid-high end one is mostly snake oil and marketing
features and asthetics pretty much
otoh GPUs
features you dont need
the build quality on all the versions si shit
honestly not sure i've ever noticed a difference
but again i haven't touched a cheap board since the days when you'd buy a 'refurbished' PCCHIPS or ECS board off ebay
you arent getting 800 Mhz by turning the voltage up and changing multiplier settings
RIP 2600K
we miss you
i mean what's 800mhz when the processor is already 5ghz and the game doesn't push it past like 30% anyway (unless it's ffxiv)
yep
I remember when X58 and first gen core i series came out
the i7 920 was a fuckin bargain value lmao
i also hate how they've minmaxed things such that you can't buy a "best" all purpose computer anymore
you could just jack up the FSB like crazy and get 4 GHz out of a 2.4 GHz CPU
you can get gaming performance or creative performance
and there's no fucking overlap at all
i think that was most notable with amd
where the 7950x3d is notably worse than a 7800x3d in almost everything I think?
and workstation motherboards cost way too much
tbh
maybe not best but you can certainly have a pretty decent jack of all trades with an X800 series processor or X700K
this whole "it's for business so we fucking rip you off" thing makes me think we should stop subsidizing business purchases
I think when people say they need productivity but game they mean im gonna run blender when im bored one weekend
if the US stopped letting busineses write off their servers
oh god
dell would be dead probably in like a year
like at this point it's so ridiculous
had to pay intel extra money for some business class virtualization shit that was already on the CPU anyway
why does 'business' have to cost like 3x more
and the business doesn't care because it's not their $$
yep
they just need it now
and that it works
all they care about
pffft
they are still doing this scam
they make massive margins on them
100 percent
like I honestly see AMD fucking off from the Radeon gaming sector
and only focus on enterprise
if they have a limited allocation at TSMC why bother making massive GPU dies that nobody is gonna buy
sell them to commercial space
yeah I fuck

i like how iphone batteries seem to last like 3 days if you don't use them much... and then suddenly after a few years they can barely survive a day lmao
idk why but the cursor movement in wayland is beginning to really get on my nerves
I mean I wouldn’t want to run high end CPUs on cheap boards with shit VRMs but u could
But the difference between mid range and high end is nothing
Unless u need something niche like my friend bought a specific x670 board for the PCIe lanes
Porsche’s New 3.6L 911 GTS Hybrid Engine Is A Huge Improvement!
Get the Laifen Wave here: https://bit.ly/3XoPGG6
Sponsored by Laifen. Subscribe to EE: https://goo.gl/VZstk7
The Porsche 911 GTS has a new hybrid powertrain, and it’ll convince you to go hybrid over the GTS’ previous 3.0L twin-turbo engine. The benefits are extraordinary, with more...
Have to admit the new blazer looks nice even if it's probably a POS mechanically 
Kinda looks like an evoque
yeah but its not a 1993 K5 Blazer
those are pretty rare because they changed it to the Tahoe 2 years later and made them 4 doors
What model has had the biggest makeover over the years I wonder? Rav4 is a lot larger than it used to be. Blazer is arguably smaller and shifted from a bronco-alike to almost a crossover now.
yeah the blazer is kinda weird, they ditched the K5 and only sold the S-10 Blazer
Maybe those early 90s Mustangs 
then they got rid of that and had the Trailblazer
that was a flop so they got rid of the blazer all together
and now we have the new blazer
the trailblazers had an inline 5 engine
kinda weird
Owners try to buy spark plugs and they come in packs of 4 smh /s
I lost count of how many spark plugs i went thru with my saturn bc of fouling lol
good ol oil burning
same on the camry rofl
got maybe 10,000 miles out of them
the thing I hate about spark plugs is the bullshit marketing
anyone will tell you to use whatever came with the vehicle
but you go to any part store
and they have 400 options
Near the end I was replacing them like every oil change
Yeah I only ever got the base copper. I think they said the iridium etc. were actually bad for the car bc they sparked hotter
An SS model was introduced for the 2006 model year. This was the first time a production SUV wore the Super Sport badge, which was first introduced with the 1961 Impala.[6] The TrailBlazer SS came standard with a 6.0L LS2 V8 engine which produced up to 395 bhp and 400 lb-ft (540 nm) of torque, the same standard engine as the 2005–2007 C6 Corvette, except with different exhaust (more restrictive) and a taller intake manifold to better use the engine's torque characteristics in the much heavier body. The suspension was stiffened and lowered from the factory, with an air-leveling system in the rear, and rode on 20 in (510 mm) wheels wearing 255 mm (10.0 in) wide tires—all which contributed to much improved handling. The TrailBlazer SS also came with a 4.10 rear axle ratio, improving off-the-line acceleration, and was available in both rear-wheel-drive and all-wheel-drive configurations. About 1.7% of total TrailBlazer production had the SS package (Regular Production Option code B4U).[7]

thats hot
4:10 gears
Gonna help my friends put in some techron and the aftermarket module that disables ecomode on their Odyssey bc the engine is rough atm
oh the cylinder deactivation shit in the 3.5 going out? lmao
The ecomode parks the pistons for too long so they dry out and gum up, then damage the piston rings
you'd think these companies would get the fuckin picture that we dont want this shit and if its gonna completely destroy your engine at 100,000 miles thats inexcusable
So the recommendation is to simply get the module that turns that shit off and run some techron thru it to clean out the gunk and expand the rings slightly to counteract the dmg
I may buy a chevy 2500 just so I can get the 6.6 engine as it doesnt include cylinder deactivation
And yep, it's only at 108k miles. No reason for it to be as rough as it is atm
I think the deactivation is fine in the V8s since it can turn off exactly half, whereas I think with the V6 it has to cycle thru 2 or something
They don't cover it for 2016, only 2013 and earlier bc of a court case
They wanted to charge them $3500 to rebuild the motor
And ppl on the Odyclub forum said it's usually not worth it bc half the time they don't put it back together right and other shit goes wrong then lol
They do the ecomode thing for CAFE credits
But yeah it only helps by like 1-2mpg
It works assuming you have good oil pressure
When you don’t the lifters get stuck closed
And rub against the cam lobe
Over time it shaves off the entire cam lobe
why does this look like a hardware unboxed thumbnail

SUPPORT OUR WORK - Grab a GN Case Badge - https://store.gamersnexus.net/products/gn-3d-multi-level-pc-case-magnets-amd-ryzen-intel-gn-logo or a GN CyberSkeleton V2 Shirt https://store.gamersnexus.net/products/limited-edition-foil-cyberskeleton2-cotton-tshirt
In this video, we meet with ASUS physically to go over the ASUS RMA and warranty investi...
ohh boy
ah, yes, "smug youtuber vs faceless corporation", the classic
I like this smug youtuber though
Except he knows what he's talking about so he has every right to be smug
plus ASUS has gotten away with this for decades
I remember my X58 board having shot dimm slots and they refused to do anything
just kinda used to smug people who don't know what they're talking about at this point... too many of those in the world...

you don't have to call me out so blatantly bro
i wouldnt own any asus products out of choice except i got my x670e for like $200
but i think a lot of the time the cheap vrms are the same vrms anyway lol
but we're kinda confusing 'low end' and 'mid range' I think
what the fuck are you supposed to do about them
you tell em to shut up, now you’re the asshole
i mean steve is always right but hes a really annoying presenter bc of the smugness imo
GN would be better if he did the research and writing and let someone less... condescending be the face of the channel
ijustine 😄
its annoying bc the content is good but steve just irritates me 50% of the time
he doesn't bug me. I think the people who parrot everything he says on reddit are the most annoying.
never trust anyone who thinks they’re right
lol
Intel confirms Raptor Lake-S stability issues are caused by incorrect value in microcode, update on the way Intel has not yet released a statement on the Core i9 stability issues, despite promising such a statement by the end of May. However, it seems that Intel admits that the problem is not simply caused by motherboard […]
hmm
That's... hilarious?
Join us on a journey through automotive history as we uncover the story behind what many consider the worst Chevrolet ever produced. In this video, we dive deep into the design, production, and legacy of this notorious Chevy model.
🔻
"John Tasoulas - The Dead" is under a Creative Commons (CC-BY 3.0) license
/ johntasoulas
Music promoted ...
@deep sapphire https://x.com/twaniimals/status/1801420281602576483?s=46
I nominate these guys as the official #technology-discussion mascots
I'm glad they are wearing their proper PPE
lmao
guys thinking of upgrading my pixel 3a to higher pixel, should I get a 7 pro?
or 8 pro? ._.
buy an iPhone
waits for the arguments
naw buy a oneplus open 
Raul Arbelaez, VP of the IIHS Vehicle Research Center, breaks down the 2023 Ford Expedition's performance in the IIHS small overlap crash test, and contrasts that performance with the good-rated 2023 Jeep Wagoneer.
Check full safety ratings for the Expedition, Wagoneer, and Chevrolet Tahoe: https://go.iihs.org/news-large-SUVs
Subscribe: https...
LMAO
ford
bro vehicles from the 90s did better than this
I read commercial vehicles tend to use aftermarket leafs
and they do a half assed job installing them
which is pretty ridiculous because if a leaf breaks that could kill someone
Nah that just sheared
They install them here
Probably happened today, I checked that truck yesterday and it was fine
@deep sapphire man leaf spring shackles just like to disintegrate
This truck was also fine a few days ago
I think it’s cause of the rivets, and also the fact it’s a truck that goes from 17 tons empty to 25 tons full
is that being held with a weld bead?
💀
Nah
There is a hot rivet that goes through the whole leaf spring
The welds keep the shackles from moving which is what causes the rivets to shear off
They start twisting and tap the leaf spring and eventually loosen themselves to the point where they will rattle themselves apart
my truck has that and a nut on the top
was a nightmare to take off while trying to replace the axle shackle bolts
I had to use 2 ratchet straps
I wish it was bolts but the rivets are supposed to give a lil so they don’t snap in the middle, it’s better they shear at the bottom and don’t allow the whole bundle to fly apart
and then the great china made shackle bolts stretched on me
take my advice
just buy them from america
it aint worth saving a couple bucks
I mean yuh these are peterbilts
"grade 8" yeah okay
This company doesn’t cheap out on parts, Utah DOT is exceedingly strict to the point we got a fine for a lug checker being off
So if anything is our fault we can expect hell
Yeah I figured as much
Most states probably are
If someone dies due to a faulty repair gonna be some criminal charges coming back to the shop
I have a 7 pro (paid $290) and I'm happy with it
it's obviously not hot shit cpu and older (model) so will be harder to find one with perfect battery
Oo one plus open is better?
Want to have the one that has the longest software support lol
thats why im glad that we do everything in house except for warranty stuff obviously
we just had a brand new 2024 Peterbilt go down and it was a warranty repair and they covered it completely, total invoice was 100k
apparently it was the most expensive warranty invoice so far this year for Peterbilt
Is heavy diesel mechanic a pretty sweet job
I’ve heard mixed things
Some love it others find it really brutal
well
im basically at the bottom rung rn
i just do the inspections and help when needed
I think maintenance mechanic is still the best
but CNG/Diesel stuff is very rough but god is the pay crazy if you get with a good company
the techs here make 40 an hour minimum
plus raises every 6 months
i mean i doubt it. all the folding phones will be a headache after a year lol
or after a few drops*
the techs that have specialized training make insane money
the pixel fold would probably be fine if you want a pixel
but I wouldn't spend >$1k on any phone, never mind a folding one
one of the electrical guys has been with the company for 10 years and he makes like 250k a year 
nice
That’s wild cause automotive electrical shit really isn’t that difficult
base trucks? yea. we install like an extra 3 or 4 systems tho
Its all a circuit at the end of the day
cameras, TPMS, some extra safety stuff, extra control panels
Live to ground
I could probably make a killing developing those units hhaha
I dislike how accurate this is, but I can't say you're wrong.
i know how to toy with canbus
I could make it so you could turn on your lights by hitting a button on the steering wheel
or honk the horn XD
i wonder why air brakes are their own thing like
afaik air brakes work the opposite of hydraulic ones but that's only in a mechanical sense
Hydraulic brakes would overheat and fail
it still has a pedal, no?
Yeah
i wonder what the special air brake training is
I hate when people throw those stupid hose clamps all over shit
use the ones that require pliers instead of the screwdriver type ones
they actually work better
if ur air runs out u die :3
The worm gear ones? Yeah they aren’t great but for a cooling system it’s fine
i have power side steps on my jeep and it did come with a nice little harness
with a fuse on it ofc
idk ive never seen them not leak before
so i ran it across the engine and through the firewall
People install them on high pressure lines
ok kinda kidding 😛
You need to use ear clamps
i forgot what exactly i did
yea ear clamps go hard
but it's tied up on the same channel as the regular wire harness is
My roomie's car has far too many holes in his firewall for all the crap he's running through it. xD
they used this weird box under the cowl which
seems like an utter shit place to run wiring
Not quite swiss cheese yet, but he's been going that way for awhile.
i mean it's basically a raceway across the top rear of the engine bay
but there's no room for additional wires and I couldn't figure out how to open it anyway
seems like a great place for leaky water to end up
Was eyeing on pixel fold, but not coming to Australia. What the heck
Also yeah, a new technology still haha
Assembling a mid 90s Windows NT workstation computer! Specifically NT 4.0 with two Intel Pentium Pro 200MHz processors, maxed-out RAM, and a Matrox MGA Millennium video card. All in an awesome metal case on wheels. Testing, dusting, building, troubleshooting, games, CAD rendering and more! Most of which I've never done so let's dive in and make ...
talking bios lol
Jesus, that case has wheels
that wasn't too unusual in the day lol
ooo neat
i want it lol
rofl at the price
nevermind
are you at a porsche dealership
Yuh
Cars and coffee
Coffee stand made out of a tandem motorcycle this is so awesome
I want one of those bikes ngl
https://videocardz.com/newz/intel-finds-root-cause-of-raptor-lake-cpu-stability-issues-bios-with-new-microcode-underway uh oh @deep sapphire still not fixed 
Intel confirms Raptor Lake-S stability issues are caused by incorrect value in microcode, update on the way Update: Intel has denied the report that the issue described in the leaked materials is the root cause of the instability on Intel 13/14th Gen Core series: “Contrary to recent media reports, Intel has not confirmed root cause […]
after the bios update I havent really had any issues
intel was pretty accommodating though they follow up with you at regular intervals if you dont reply to their emails
that was pretty nice most companies dont care


Grab some G54 merch here - https://www.en.garage54.ru/
Let's just say - some compounds are better than others.
For business inquiries: promotion@garage54.ru
wow lol
To fit bigger GPUs potentially
Probably
Or u can have bottom mounted fans which is popular for ITX cases maybe
wait i sent the wrong pic. that one is the nano and there it makes sense, because smol pc
but the compact has the same
wait even the regular torrent has it up top 
^^^^^^
im just worried about the PSU sucking up the hot air from the cpu
i think the o11 is just the best design for these things
me crying in Cougar xqx case w top PSU
the torrent is pretty much the best case for temps still
not too bad tho but man I feel jank
i would need to check out fractal cases in person before ever buying another lol
i used a focus g for my brother's computer once and it was, even for $50 or whatever, a shitty case
perhaps my standards are too high
prob bc reasonable volumn inside?
but it felt like a $25 case not a $50 case
yeah a bit high but not too high
idk how their higher end cases are
fractal is usually really solid



