Modded Assets Questions

[uncut kestrel]

clean the addressable, delete unitycrashhandler64 , apply again

[tulip sinew]

Is this step to upload the folder directly? I clicked on the upload interface but nothing happened

[uncut kestrel]

no

#1041207949508497548 message

[void pond]

you need to put this file in an empty folder, and then upload it to the website

[tulip sinew]

Sorry, I posted to the wrong place

[uncut kestrel]

it's OK

[tulip sinew]

I just tried to ask a question in there, but it seems that he won't let me send a message in there

How can I talk in that partition? I have a problem and need leave. Please help me. This is very important to me.

I see, it's because the partition is full and I can't join it.

[sharp pasture]

Where to find mods?

other than #modded-assets

[tulip sinew]

I followed the tutorial and replaced the original skin with the turntable skin. Now when I enter, I find that the character's portrait is gone. According to the hash value, I found that the hash value of the original skin has disappeared. What's going on?

[candid pulsar]

Create yourself

[sharp pasture]

[tulip sinew]

I can see the preview interface normally and can enter the game normally, but when I click on 2B's character, it won't open at all. What's going on? Can any good brother give me an answer?

[tulip sinew]

This is the file of 2b's portrait. When I repaired the file, this file existed. When I reinstalled the mod, this file disappeared, and then 2b's portrait disappeared. The character interface can't be opened at all, but it can be previewed in the nmm interface. What is the reason for this?

[hardy sigil]

How to update MMM to the new version? or where can i download the new version.

[gentle merlin]

Check if the file naming is correct

[tulip sinew]

There is no problem with the file name. He just deleted the original character's portrait when loading it, causing the character's portrait file to be unable to be found when entering the game.

[last shore]

NMM isn't applying the mods I deleted the addressables folder and redownloaded NMM and still isn't working

[ruby obsidian]

When you install a mod it overrides the original file and it won't show up when you search for it, when you disable it and run the game without it it'll download the original asset again. I don't understand what's your issue here

[ruby obsidian]

NMM 0.3.2: https://gofile.io/d/bBOBlM

[tulip sinew]

It's probably because it doesn't show up in the game. The mods made by others can be used, but the ones I exported myself can't. However, I have followed the guide and can see the character normally in the NMM preview interface.

I click on that character and he will pop up directly

大概就是这样

helpme

[ruby obsidian]

Did you try re-applying your mod?

[tulip sinew]

Yes, I tried many times.

[ruby obsidian]

What mod is it, maybe it's broken?

[tulip sinew]

2b的

But I can preview it normally.

He just doesn't work in the game.

Guys, I look forward to your help.

[final leaf]

open NMM and deactivate all mods. and apply. since the other mods are working and its only this mod, repack this mod. but before you repack, delete the addressable folder and repair the game from the game's launcher. open the game so that it can download the latest addressable files. latest catalogs have been posted recently, use those in a1teri's file finder site to find the name of the latest file. use those files to repack the mod.

it can work in preview because the preview only is a "viewer". the game has more data that check if the file is ok or not. which is why, when a mod doesn't work in-game, but works in a "viewer" it means the mod needs to be repacked with the latest files

[tulip sinew]

I have tried the method you mentioned several times, and the directory is also found from the file viewer. I don't know where I did wrong in this case. I have been working on it for 8 or 9 hours. I really want to finish it.

[final leaf]

is that a mod you made yourself?

if so, then could you share? I'll try it on my end

oh wait, gotta update the game 1st

[rich surge]

Hi everyone 🙂 Where can I share my first mod?

[fervent oasis]

hmm

you can post in #modded-assets

[mild bolt]

I don't have permission to post there. And when I tried to send a file here earlier, a bot blocked me too

[fervent oasis]

i jus gave you the role to post there

[final leaf]

different account

[tulip sinew]

No, I just replaced the original skin, but it doesn't work. I followed the tutorial.

[last shore]

I did this but I don't need to repack any mods at least I don't think I just keep getting stuck at 43%

[sturdy zodiac]

Great mod @rich surge but I have a question is there a swap version for the original skin or the free one ?

[final leaf]

the tutorial? If you mean the wiki, then that doesn't teach how to swap skins to base. although its almost the same, there is one more step to it. and if that doesn't fix, then this could be one of the few skins that has a "bg" inside, so will need a different method to swap it. unfortunately I don't remember that method and the guide wont contain anything related to swapping paid skins onto base to avoid risk. I think @void pond knows about that method

[final leaf]

yea coz usually it gets fixed before that.

and he isn't getting stuck at 43%

[last shore]

okay

[final leaf]

he can play the game fine

just can't open 2B's character page

[last shore]

yeah I had to do one at a time .-. thanks for the help 🙂

[rich surge]

I haven't quite figured out how it all works with file packing yet, I need to learn a bit. And this file was packaged for me by a friend, based on the new skin file.

[final leaf]

which part confused you?

[sturdy zodiac]

Oh ok 😊

[rich surge]

In fact, I haven't tried it yet 😅 at my leisure I will check how it works.

[tulip sinew]

I'm tired, brothers, so I can only give up. Thank you for helping me.

[crimson bane]

hello

None of the mod managers work on my side

[errant idol]

https://nikke-modding-wiki.vercel.app/ read and follow the Troubleshooting guide and you should solve the problems

[errant idol]

did you follow the guide to swap the mod correctly? or you just use 2b_02 mods and rename it to 2b_00. It is 100% that something wrong with your mod so it is not able to show in game

[crimson bane]

Is it normal that I'm stuck on this?

[errant idol]

stuck

[crimson bane]

I'm stuck downloading the configs

[fresh gust]

It's sometimes a DNS/ISP/VPN issue

[crimson bane]

if I go through another mod manager, it tells me that

[fresh gust]

Do you have a VPN active or anything like that? If so, try toggling on... if not, try using a VPN if you have access to a decent one haha

[crimson bane]

How can I fix this?

whether i use it or not i have the same problem

[errant idol]

stop using vpn then

or use another ip address

[crimson bane]

ok but that won't change my problem in any case

[errant idol]

open the mod managers as admin? reboot pc?

[uncut kestrel]

Check the adressable folder,if the catelog name is unidentified,delete it, login nikke again, apply nmm again

[crimson bane]

found!! I took another version of the software, it works

thanks anyway

[errant idol]

nmm 0.2.7?

[crimson bane]

latest

[crimson bane]

Which modpack do you recommend that is complete in terms of skinmods?

[rose barn]

Hi, is there a way to swap a standing nikke lobby or an event lobby for another event lobby or burst lobby?

[uncut fox]

Don't really exist in this community

[fresh gust]

No modpacks, generally find the ones you like from #modded-assets or just create your own with tools

The mods are so niche in some cases for people's preferences that modpacks just don't really make sense thematically or anything

[modern wolf]

I agree haha, if i have to use mods, will be just to "get" the skins i can't get.

[pulsar island]

my mods dont work since the update is there any fix for it yet ?

[void pond]

2B skin is bugged iirc because that skin got "acc" and "bg" at the same time... so my hex editor script corrupts the .skel

[crimson bane]

my game loads indefinitely

[pulsar island]

i keep getting this when i close NMM and i think this is why my mods are working can someone help me with this ? (nvm acutally i just launched the game and my mods work again but can someone help me if this is a problem later on ?

[uncut kestrel]

are you change the folder setting ?

right click the nmm folder > properties > uncheck read only

or try to change location first

[pulsar island]

(its the same folder) i uncheck it but then it keeps checking itself again

[uncut kestrel]

do you uncheck it and include sub folders

or just check the setting .json property

[scarlet sedge]

soo finally managed get mods working, just one question is Burst Audio still not a thing?

[pulsar island]

ya i did that it uncheck its i press ok then when i go back to check it read only is still on for some reason it keeps rechecking it self (sorry for the late reply)

[uncut kestrel]

you can just uncheck setting.json first, If it fails to resolve,apply to subfolders

[uncut kestrel]

not support now

[pulsar island]

sorry where is that ?

[uncut kestrel]

same folder with nmm.exe

[pulsar island]

the settings.json isnt checked with read only

[uncut kestrel]

any hidden file in nmm folder?

[pulsar island]

sorry i cant really tell

[uncut kestrel]

maybe turn off anti virus ,run as admin,try again

[pulsar island]

oh shit this worked

so should i just add the NMM as an exclusion

[uncut kestrel]

yes

[final leaf]

@tulip sinew this is why your mod is not working. it has some stuffs inside that skin that can't be swapped onto the base.

[sturdy zodiac]

Guys does some one have updated link for :

• miagi mods uploaded by @limpid blaze
• his other links does not work too #modded-assets message does anyone have that too
• this account too #modded-assets message

[paper raft]

Is it possible to add physics to 2b?

[crimson bane]

when i apply the mods the game loads indefinitely, i was stuck for almost 1 hour

[tulip sinew]

I have fixed it, thank you everyone, the reason is that the file name was not changed

[crimson bane]

Who are you talking to?

[final leaf]

it worked in-game? does it not have any "bg" or "acc" in that skin?

[tulip sinew]

It's working fine in the game now, I'm learning how to change the icon

[crimson bane]

My game gets stuck on loading "add catalogue path", it stays like that for a very long time

[austere steeple]

Hello everyone, I am playing nikke's private server version (very convenient, because I have never played the official server)

Recently I am studying how to install the terminal and the mod to take effect, but I found that the mod I found seems to be invalid. The game version is 134.12.5, yes, it is the version a few days ago, and I can't seem to follow up with the latest update 134.14.8 (it will report a system error). Does anyone know why, or what I missed, or the mod is invalid?

If you can solve it, I will be very grateful, nmm version is 032

[crimson bane]

me, mods put the game in infinite loading

[crimson bane]

The game is stuck loading even though I followed the mod manager steps, what should I do?

[austere steeple]

Try delete C:%HOMEPATH%\AppData\LocalLow\com_proximabeta, restart game

[crimson bane]

As soon as I put the mods back, it does the same thing again.

[last shore]

@crimson bane you have to do what @final leaf said to me. look at the attachment

[crimson bane]

can we rename the mods?

[last shore]

mm, I'm honestly not sure I just know I had a problem with being stuck on 43% as well and I had to disable the mods and activate one at a time to see what mods were causing the issue

[crimson bane]

well, no mod works for me

[last shore]

those may need to get repacked then

[crimson bane]

even the most recent ones cause me this problem

[last shore]

damn. the only thing I can say is make sure that your NMM is up to date because I know the creator updated it yesterday I believe, and to try and follow the steps that @final leaf gave which is here:

open NMM and deactivate all mods. and apply. since the other mods are working and its only this mod, repack this mod. but before you repack, delete the addressable folder and repair the game from the game's launcher. open the game so that it can download the latest addressable files. latest catalogs have been posted recently, use those in a1teri's file finder site to find the name of the latest file. use those files to repack the mod.

[crimson bane]

where is the latest version? because if it's 32, I already have it

[last shore]

Step 1: Backup Your Mods
Create a new folder (e.g., on your Desktop) and move all of your mod files from NMM into that folder so you don’t lose them.

Step 2: Uninstall NMM
Completely uninstall NIKKE Mod Manager (NMM) from your system.

Step 3: Clear Game Cache
Press Win + R, and find the where the game is
%AppData%/../LocalLow/com_proximabeta/NIKKE
In that folder, delete the folder named:
com.shiftup.addressables

Step 4: Repair the Game
Launch the NIKKE Launcher and click the “Repair” button. Then launch the game.
Let the game load completely and download any required updates.
Once it’s done, close the game.

Step 5: Reinstall NMM
Download and reinstall NIKKE Mod Manager.

Step 6: Set the Game Path
Open NMM and set the correct path to your NIKKE game installation.

Step 7: Re-add and Test Mods
Add a single mod from your backup folder.
Activate it, click “Apply Mod,” and launch the game to confirm it works.

[crimson bane]

can you ping me the latest version of nmm please

[last shore]

the latest version is 0.32

[last shore]

@crimson bane

but to be safe I would just uninstall the one you have and redownload it because I think the creator did like a patch update for 0.32 yesterday

[crimson bane]

I'm doing it, I'll keep you posted

[crimson bane]

I just did everything and bad news, the game is stuck again at 43%

[ruby obsidian]

Do you use lobby wallpaper mods? Sometimes people use them with NMM and game stuck at 43 mine included lmao

I need to switch to Naoh's NMM but I'm lazy

[crimson bane]

no, skin cover and aim mods

[ruby obsidian]

If I were you I'd try disabling some of my mods and try like that. Trial and error you know. If you are hundred percent sure your NMM setup is correct

I'm really not qualified for helping people troubleshoot but that's what I do usually, to fix such stuff

[crimson bane]

I did all the mods and nothing changed.

and I doubt that the most recent mods are already defective

[neon dawn]

Try previewing the mods in the list. If any of them load infinitely without showing the mod then they're outdated.

[uncut kestrel]

cannot preview ≠ outdated

[neon dawn]

ye, outdated isn't the right word. Mb.

[void pond]

yea, you can use the physics fixer tool on doro tools #1041207949508497548 message

[void pond]

#modded-assets message

[neon dawn]

What to do when the mods don't work even when after i repacked them?

[crimson bane]

How do we preview?

[neon dawn]

The eye icon

[void pond]

na0h repacker?

[uncut kestrel]

main reason it interferes with previewing is LZ4 ,even if it can be previewed, it might not function properly , just like that earlier 2B case

[neon dawn]

Yeah, I specifically used that to repack.

I even tried to do it manually after but still no shot.

[crimson bane]

I just did it, I kept the ones that appear and don't work

[void pond]

how old are the mods? are they named for NMM (cXXX_XXX_aim/cover/standing_author_character) ?

[crimson bane]

So what do I do?

[void pond]

if you're on Windows 11 you can use Na0h NMM instead, that one got an improved native previewer

1. go to Na0h X acc --> x.com/na0hmod
2. click on his discord server and join
3. after joining go to the channel #how-to-install and download his NMM
4. set nikke.exe path again, select your mods to be activated, etc
   after that you're ready to use it like the og NMM and to use its previewer

[crimson bane]

This is the same technique I did and it didn't do anything.

[void pond]

the mod works ingame at least?

I read you downloaded the og NMM right? Na0h NMM is not the same than og NMM

Na0h version comes with more features including improved previewer

[void pond]

so 2B skin can be swapped normally then?
I'll try the manual way with UABEA later to be sure, skipping the hex edition

[crimson bane]

Well, I took recent mods, I checked the previews to make sure if it works then applied one by one, the result remains the same

[crimson bane]

I have this problem

[rocky shell]

try restarting your PC and set the game path first. looks like the game accessing some file there

or close all nikek processes

[crimson bane]

Exactly, I set the game path and I have this error

[rocky shell]

just copy the content from NKAB manually over to NIKKE then

[crimson bane]

When I apply the mods after completing the game path, I get this error

[crimson bane]

What is NKAB and where can I find it?

[rocky shell]

hmm you only activated my neon mod, right?

[rocky shell]

NikkeModManager\Tools\nkab

[crimson bane]

no, another one I had that's supposed to work

in which NIKKE folder

[crimson bane]

and then?

[rocky shell]

dDoes Apply Mods work now?

[crimson bane]

still not

[sturdy zodiac]

i think this issue is due to a mod being incompatable or too old .
i was having this problem but when i removed an old "Volume" mod i just installed it worked fine

[crimson bane]

except that he does this to me with all the mods

[neon dawn]

Yes.

Last year-ish. Some of them work but some don't. Weird as hell.

[void pond]

I would recommend to only use/repack mods from 2024, mods from 2022-2023 need an extra step with NAU first

[crimson bane]

Are there names to give to the mods?

[void pond]

the name format you see on all the recent mods are a needed format so NMM can load them properly

c010_00_standing_author_Rapi, etc

well the important part is c010_00_standing_, the author and mod name can be what you want
c010_00_standing_doro_Rapipidorowhatever

[indigo sentinel]

guys can someone help me please to find vanilla naga mod? nothing i can find anywhere, only options for skins, but i dont have it to use( dont want to mess with the swap things

[void pond]

what u mean vanilla naga?

[austere dagger]

default skin i guess

[void pond]

I only remember seireiko mod for default naga, it needs repack tho

[austere dagger]

i only have a futa version of this

[void pond]

well, his mega link with old free mods is kinda hidden on 2024 post

[hardy sigil]

hey! can you tell me what is "mod swap" :))) i'm new, i really don't know.

[void pond]

when you swap skins over the default character (visually), or a character over another character (visually)

[crimson bane]

Where can I find mods other than here?

[rose barn]

How do I replace a lobby with another? I dont want just to replace a Nikke standing by another one but, for example, replace the default Rapi lobby with the Ludmilla event lobby

[paper raft]

Has someone already done that and is it easy to do

[void pond]

I use it myself and yea it's easy to use but the requirements are around 12GB of dependencies to use all the tools included in doro tools

[paper raft]

Damn

Not gonna attempt it

[void pond]

check this guide:#1041207949508497548 message
altought to swap an event lobby over a character lobby is a bit more complicated

[void pond]

there are pinned messages on #modded-assets where modders share free mods, if you see posts with no downloadable files it's because they are on their mega or they are paid mods that require subscription

[rose barn]

Thank you! I probably didn't express myself correctly, I wanted to change one Lobby event for another, the Rapi one I was referring to is the one that appears when you start the game.

[void pond]

for your homescreen after to enter to the game right?

[rose barn]

Yep

[void pond]

if you're talking about the animation you see when NIKKE is loading that is not a lobby, it's a video

[rose barn]

Nono, I mean the lobby screen, the one that you see when you enter the game. Where the Campaign button, the Ark button, etc appears

[void pond]

in the case of event lobby files you can swap them following the video I linked too

just rename the .atlas + .skel + .png files to match with the event lobby you're swapping and it will work
you can apply lobby mods with Na0h NMM

[rose barn]

Perfect. Again, thank you so much

[void pond]

👍

[crimson bane]

I have a mod that worked and now it doesn't, why?

[void pond]

maybe just needs reapply?

[crimson bane]

that's what i do, i noticed that no mods work, it blocks loading at 43, again

[void pond]

but you said it was working, the game should be stuck at 43% with outdated mods or NMM failing to apply the mods

[rose barn]

@void pond sorry to bother you, do you know if there is a table like the one in the link (https://kxdekxde.github.io/nikke-lobby-burst/lobbyburst.html) but containing the event lobbies?

[void pond]

not yet, I need to make one but meanwhile you can use this:
https://github.com/kxdekxde/nikke-lobbyburst-mod-manager/blob/main/AddressablesJSON/lobby_event_data.json

[rose barn]

Great, thank you

[hardy sigil]

mod repack simply put in software to refresh it? rename it? or do we have to do something more complicated?

I was going to download the mods people shared, but it looks like there will be old mods that need to be repack.

[neon dawn]

I could be wrong but u have to decrypt the original files according to the mods and put them in the "bundle_files".

My personal steps using "Na0h_repacker":

1. Use Alter1 and Everything finder to get the original files according to the mods.

2. Decrypt them to get the raw files and put them in the "bundle_files" folder.

3. Put the mods u want to repack in the "old_mods".

4. Run "Repack.exe" and ur repacked mods will be in the "repack_mods" folder.

Feel free to correct me if I'm wrong or an easier way to do it.

[rose barn]

Does anyone know why I can't see any lobby backgrounds when I run the Doro Tools Lobby Background Swapper, am I missing something? I remember running it and downloading a bunch of images, but I had to reinstall Doro Tools and now it doesn't seem to work.

[fresh gust]

Did mods need repacking recently?

EDIT: No it didn't, I just had to delete old addressables

[crimson bane]

At first it worked, then when I tried to try another mod, it got stuck at 43%. So I removed the mod that wasn't working, and the game continues to crash.

[hardy sigil]

How? This seems simple.

[fathom tinsel]

does lobby and burst mod files need to be removed to be able to login to the game when the times where nmm is not updated yet?

[uncut kestrel]

you should remove the addressable folder

when you apply the mods, original asset have been deleted

[crimson bane]

What do I do about my problem?

[uncut kestrel]

if you replace the asset directly, will not be affected by update

[fathom tinsel]

oh so if i apply it directly the mod still works? or dont work but it wont crash the game

[uncut kestrel]

if nmm is not ready for new configuration but you applied it for new addressable,you will stuck at 43%

[crimson bane]

Well, my game without mod freezes at 57% for a long time.

[fathom tinsel]

ok so if i add burst/lobby mod and applied them with nmm the addressable folder needs to be removed whenever new update come, but what if i apply the mod directly to the folder?

[fresh gust]

If you're using other mods then yes most likely, and it's good practice anyway to do so

[fresh gust]

repair through launcher to reset the game to default

[crimson bane]

already done 3x and nothing changes

[fresh gust]

That can't be correct - try deleting your addressables folder then so that the game is forced to reacquire the files

[crimson bane]

like what folders and files?

at worst, I uninstall and reinstall

[fathom tinsel]

damn i used to do that but i dont anymore cause they just suddenly stop being applied and the game wasnt stuck whenever they dont work, i thought danieru fixed smth somewhere so they dont stuck at 57% anymore

[uncut kestrel]

If you're only using L/B mods, you can directly replace the files , until today, they're not encrypted. If you're mixing different mods, delete addressable folder and unitycrashhandler64.exe at every maintenance , wait the new nmm configuration .

[fathom tinsel]

as long as i keep the vanilla folder it'll be fine then for l/b right

[crimson bane]

I feel like even after uninstalling and reinstalling the game, I'm stuck at 57..

[uncut kestrel]

i don't understand what you mean

[uncut kestrel]

delete whole "com_proximabeta" folder

[crimson bane]

I just uninstalled and reinstalled the game

[uncut kestrel]

uninstaller will not clear com_proximabeta

[crimson bane]

I uninstalled it, the folder was no longer there

[uncut kestrel]

if there are not new folder rebulid,this indicates that you've changed the location before , check the actual path in the settings.json at nmm folder

[crimson bane]

And if the path is there? What should I do?

[uncut kestrel]

If the issue is caused by mods, deleting them should fix it and allow you to log in normally. If you still can’t log in after removing them, then it’s not mod related ,for example, you might not be using the official server. In that case, you’ll need to resolve the issue on your own.

[crimson bane]

The problem is that it asks me to download 13mb of files every time I restart the game and then hangs at 57% when the download is finished.

[fathom tinsel]

this is the addressable folder they were mentioning, assuming you dont understand where the folder is
#1041207949508497548 message

[fathom tinsel]

cause like older burst/lobby mods have to be applied in their appropriate folder before current version nmm made them possible right, i was confirming if i applied them like that i need to replace the folder/files with the vanilla one(without mod) whenever update come. or maybe are all older l/b mods dont work anymore outside the ones that can be applied with nmm?

[void pond]

every time you add or remove a mod you need to click apply again, Idk what is the issue with your mods tho

[crimson bane]

Well a file is corrupted so my game crashes, impossible to delete the corrupted file even by command

so maybe the mod manager is not well optimized

[void pond]

it seems like you have the same issue someone else had some days ago, your Python path is wrong because probably you have multiple Python versions installed... you need to uninstall Python and Python Launcher and after that install it again using doro tools installer .bat file

[uncut kestrel]

when you delete the addressable folder, the lobby asset will be automatically restored upon login,no further action is needed. Just keep an eye on Discord for any updates about new configurations

[hardy sigil]

I had a similar problem to you the other day, if I open MMM and apply the mod before entering the game, my game will freeze at 43% or 57%. If I open the game and let it load "tap to continue" then start the mod, I can still enter the game. But my mod doesn't work, the character's appearance doesn't change no matter what I do until I change to MMM 0.32 from another link, after completely deleting the old MMM and using that new MMM, everything works perfectly

[crimson bane]

I reinstall the game somewhere other than the old folder, so as not to have the corrupted file that I can't delete anymore.

The thing is, I have what you tell me, but it still crashes at 43% with the mods.

[uncut kestrel]

what is the corrupted file ?

[crimson bane]

a folder named "ba" in "unity"

[uncut kestrel]

"still crashes at 43% with the mods" i just want to know, do you try to login without apply any mod and clear addressable?

[uncut kestrel]

manual or unistaller?

[hardy sigil]

If this error is in the game files, you can press repair. When removing the mod, just delete the version.dll file.

[uncut kestrel]

this is game data file, repair only fix the launcher and client

[hardy sigil]

The mod itself doesn't interfere too deeply with the game code. It just overwrites if there's an error, delete the mod and it's gone. It doesn't damage the game files. But I still don't understand, what did that guy do to cause such an error in the file?

[crimson bane]

I uninstalled the game and tried to delete the "ba" folder myself. And finally, I already tried that, I already said it above

[hardy sigil]

why did you delete the game folder? did anyone tell you to delete "com proximabeta"? Deleting game files will cause the game to not work properly.

data in game files, best not to delete it. just overwrite it, with software or file if you have enough knowledge

[crimson bane]

If what's preventing me from launching the game is a corrupted folder that can't be deleted, you can imagine that deleting another folder won't change anything. And yes, I tried everything until I discovered the corrupted folder.

[hardy sigil]

and you should also uninstall using launcher instead of uninstalling manually. Uninstalling using launcher will delete all games including in appdata

[uncut kestrel]

It's obvious the client wasn’t fully closed ,I don’t believe it can’t be deleted after pc restart,good luck.

[hardy sigil]

you just don't know how to delete it. If it's a really stubborn folder, you still have admin rights. But if it's really stubborn, then you probably need a USB to quickly reinstall Windows and download new games and new mods.

[rose barn]

Thanks for the reply, I uninstalled Python and the Launcher and reinstalled it, but there was a new error (the one in the image) and now the other doro toolls like character swapper don't even open. I tried uninstalling again Python and deleting and downloading again DoroTools, but the error persists

[crimson bane]

Where can I find other mods? Other servers, other social networks

[celest flume]

Is there a way to fix ERROR! Update Bundle: 'EndianBinaryReader_Streamable_BigEndian' object has no attribute 'save'?

I used Naoh's repacker

[hardy sigil]

-I'm using it, someone sent it above. The previous mod is still version 0.32 but has errors. After downloading from the new link, the error is gone.
-But you know. MMM does not affect the game code as deeply as you think, it just overwrites it and if there is any error, you just need to delete MMM and the error will disappear immediately.
What I need to say has been said, you should uninstall the game using the launcher, do not uninstall it manually because it can easily cause errors.
-If you encounter any problem that is too difficult to solve, choose a faster way, which is "reset PC", simple but effective, you will have a PC with completely new data. At that time, you should use it carefully because only using it incorrectly will cause errors.

[neon dawn]

Did u put decrypted files in the "bundle_files" folder?

[neon dawn]

#1041208182539825182 message

[celest flume]

Oohh, thank! I'll try that

[void pond]

open cmd and type pip install requests

[uncut fox]

Ping the poster

[regal moth]

Im unable to find the original author for the standing mod because I had used the character swapper, if anyone knows who they are please tell me so I can give them proper credit

[uncut fox]

Yes

[fallen lance]

@rocky shell what's your NMM's name convention for the favorite item scene?

[red briar]

you can do it with doro tools, if you give me some minutes ill send the files, but you can do swaps for normal skins yourself with doro tools, it is not dificult and will take you less time than wiating for someone to share it

there you go

question people, how to i swap a skin mod from one skin to another from the same character, for example a mod for the cinderella sklin 01 so it works with cinderella skin 00

[void pond]

Idk what is going on with your Python installation tbh, it's saying some modules are not found when the script is supposed to install those modules
Try going to installation_scripts folder and run install_requirements.py first

[rose barn]

I solved it by installing some of the requirement manually, the thing is that Im facing again the problem at swapping lobby background

this

[void pond]

you can't use the tools until you make sure to have all the dependencies and Python properly installed

because all the tools use the same dependencies

what you see before that background preview window? you should see the cmd window displaying a lot of files being copied

[rose barn]

I think I did it, the 1_INSTALL_REQUIREMENTS finished correctly. Is there a way to check if everything was properly installed?

[rose barn]

this is all I see

[void pond]

run the script install_requirements.py again, if you see the message "requirements satisfied" or something like that then they are properly installed now

[void pond]

yeah this is wrong, Python is running from another location different from my case

[red briar]

in modded discussion there is a pinned message about doro tools

[rose barn]

It does, it opens and closes quickly, but I recorded the screen and checked that that message appears in all requirements

[rose barn]

Should I try installing in C: disk? or is there a more proper location?

[void pond]

oh true, it seems you installed it on D:
Python needs to be on C:

You can set the PATH to D: too iirc but it's complicated so better to reinstall it

[rose barn]

Ok, I will try again. Thank you so much for the guidance

[void pond]

this is how you cmd window should be displaying the progress

oh, I forgot to make a video for the lobby background swapper

[rose barn]

I'm installing doro tools again because even with Python on C: disk the cmd was the same that I showed you. I have to mention that my Unity folder is on the same path that the game data (idk why), is that a problem?

yep, I installed again, checked the requirements were properly installed and the problem is there

[void pond]

can you check if you got the folder "naps" on this path?

%USERPROFILE%\AppData\LocalLow\Unity\com_proximabeta_NIKKE\naps

[void pond]

if not then yeah, that is the problem.... all of my tools use the normal path for naps folder, not the one the NIKKE launcher uses when the user sets the game installation path to another drive different from (C:)

[void pond]

ok it's still fixable, where you have your Unity folder?

[rose barn]

here, same directory as the game itself

[void pond]

"com_proximabeta_NIKKE\naps" folder is in there?

[rose barn]

yes, and "saus" folder too

[void pond]

ok then install this program: https://schinagl.priv.at/nt/hardlinkshellext/HardLinkShellExt_X64.exe

[rose barn]

Done

[void pond]

right-click on your com_proximabeta_NIKKE folder and select Pick Link Source

go to your folder LocalLow/Unity again, right-click>Drop As...>Junction

you should have some kind of shortcut for your com_proximabeta_NIKKE created on your LocalLow/Unity path now

[fresh gust]

When I had this issue before, I had to uninstall all instances of Python and start fresh, and then it was fine

[rose barn]

Does the "Pick Link Source" have the Icon of the installed program? because I can't find it

[void pond]

oh you got it on Spanish lol, it's "seleccionar el origen del vínculo"

[rose barn]

Yeah haha, I thought you would understand since I saw "Usuarios" on the video you ent

[rose barn]

Done

[void pond]

then drop as>junction is in Spanish too..... and idk how it's in Spanish

[void pond]

you have the shortcut now?

[rose barn]

Yep

[void pond]

now you just need to fix the issue with Python paths and after that the swapper should work

try running the swapper first

maybe the issue is fixed now

[rose barn]

It's working!

man, thank you SO MUCH

for the help, the patience and most important for answering

[void pond]

nice, leave it like that and you should be able to see the images now on the viewer window
that swapper is the slower among all of my swappers because it needs to process 300+ backgrounds one by one

for me with my HDD takes around 12 minutes

[rose barn]

yeah, the first time I runned it it took around the same time

then stopped working lol

[void pond]

that's why I only use it one time after game is updated to generate the file with my favorite background again and then never use it again until next game update

[rose barn]

Yeah, I tried this (several times) but seems that wasn't only that haha

[rose barn]

I'll do the same, lately I spend more time modding than playing hahah

[crimson bane]

The mods are no longer showing up. Do you know why?
-Yes, I've already disabled and re-enabled the mods.
-Yes, I've applied the mods.

[void pond]

are you running the installer as Admin? the installer doesn't need admin privileges

also try uninstalling UnityPy 1.23 to install 1.21 version

1.23 doesn't work as well as 1.21 for my scripts

[fresh gust]

You went through everything on the troubleshooting page?
https://nikke-modding-wiki.vercel.app

Mods have always worked for me after going through all the steps, except where NMM was not updated yet (but in this case, I can confirm NMM is updated and working atp)

[void pond]

what were you running?

following this video right?
https://autocompressor.net/av1?s=UyoiMbYz

go to the scripts folder and try running install_requirements script first

do u see something like this at least?

you installed Microsoft C++ Build Tools before to install doro tools requirements right?

https://github.com/kxdekxde/doro-tools/blob/main/README.md

UnityPy fails to be installed when C++ depencencies are missing iirc

I mean the dependencies I show on the video

👍

[rose barn]

@void pond Sorry to bother you again, may I ask if it's possible to choose the lobby background I want to be replaced? Or always will be the default one?

[upbeat gale]

i like you

[void pond]

you can pick any of the backgrounds that appear on the viewer window when they finish to load, but the lobby to be replaced will be always the default one... they change the default one to the summer lobby only on summer season so you will be fine until then

[rose barn]

Oh, I see. I wanted to apply a different lobby background for different nikkes, but at least being able to change one is good enough. Thank you!

[void pond]

https://tenor.com/view/thumbs-up-nice-well-done-approve-good-job-gif-17766914

[void pond]

yeah, standing models on lobby share the same default background sadly

[upbeat gale]

As shown in the image, I'm having a problem: my interface is in Chinese, but the video tutorial is in English. This makes me completely clueless. How can I switch my software to English? Or, can I just follow the steps in the video in the same order? Would that work?

[void pond]

you just need to leave the default marked ones and to mark the one at the bottom of the list manually, I think that was enough

[upbeat gale]

You're an absolute miracle worker!

[void pond]

let me know if it worked

[upbeat gale]

Unfortunately not. I'm having the same problem as the person above me.

[void pond]

@fresh gust @rare horizon do you know what is this issue?

[void pond]

oh wait, maybe you have the same issue related to Python not being installed in the correct place

try uninstalling Python and Python launcher and then run the python installer .exe directly

select "pip" on installation and enable PATH

[void pond]

open a new cmd window and input this:
pip install UnityPy==1.21.0

then do the same for the other modules:
pip install PyQt6==6.8.1
pip install Pillow==11.2.1
pip install tqdm==4.66.5
pip install Requests==2.32.3

[upbeat gale]

I saw the prompt about updating, so I went to the official Python website and ran the update command. It showed 'Update successful' — let me test it now.

[void pond]

wait, you have multiple Python versions too?

[upbeat gale]

I have zero computer skills.

[void pond]

https://chatgpt.com/share/686c2832-0ce8-8008-8e7c-08feb956f629

I'm learning Python from scratch too with chatgpt help... since ai is doing all the coding and I have no idea what I'm doing most of the time

[upbeat gale]

The last one seems to have worked. I'm also using AI to learn.

[lusty pier]

Does anyone have a fix for this?

[void pond]

it seems like the problem is your Windows blocking Python paths or something... maybe that's why Python can't install the modules

some users had that issue on Windows 11, and Idk how they fixed it because I moved back to Windows 10 a long time ago

[void pond]

oh wait I just saw this with more attention lol, when you install Pytho you need to mark all the checkboxes and click on Install now

[upbeat gale]

The other commands have started running too, except for the first one.

[void pond]

uninstall Python and Python launcher again, and reinstall it enabling all of the checkboxes

oh, and click on disable path limit thing too

[void pond]

what is that tho?

[upbeat gale]

I did implement that step later.

This might sound strange, but I think encountering issues and then fixing them is actually part of the fun of playing with mods.

[void pond]

I think Windows is the problem now, it's blocking your path to Python or something

[lusty pier]

Its a skin swap for Moran's canceled design. The standing swap works fine but the aim and cover are both like this

[upbeat gale]

There's some progress now — at least it's no longer crashing.

[void pond]

it could be the texture size being wrong in the .atlas

check the .atlas texture size info, it needs to match with the actual texture size

or send the assets here so I can see them

[void pond]

UnityPy installation still failing and that is the most important module

it must be 1.21.0, I tried with 1.22 before and that version doesn't work with my scripts

Idk about 1.23 version tho... maybe they improved it

[void pond]

ok let's go with UnityPy 1.23 for now then

try running doro updater to download doro tools now

if that version of UnityPy works you should be able to run all the tools and to get the generated modded files

[upbeat gale]

No luck — still getting the same two errors.

[void pond]

nono, if you installed 1.23 you don't need to run the script that install 1.21 anymore

go with 1.23 for now, let's see if that version works with the scripts

[upbeat gale]

Let's try this.

[void pond]

I only tested 1.20, 1.21 and 1.22... and 1.21 was the way to go for my scripts

[void pond]

someone testing 1.23 is helpful

[void pond]

can you access to mega.nz from your web browser normally?

[void pond]

you can access to my mega link directly then, that saves some headache
https://mega.nz/folder/ELEmEDyK#U0iobhXNez5nuWALOrYdzg

download the whole doro tools folder

as .zip

[upbeat gale]

How do I use Command Prompt to fix these two errors? I'd like to try tackling them myself.

[upbeat gale]

This might serve as a fallback option.

[void pond]

yep, the issue is the textures are 1024px but the .atlas data is 2048px

[upbeat gale]

Update the dependency in requirements.txt from UnityPy==1.21.0 to UnityPy==1.21.3.

Now let's see if the doro updater actually works!

[void pond]

[void pond]

don't use it if MEGAcmd is not working for you, download from my mega link directly

[lusty pier]

So I would change the .atlas size in uabea?

[void pond]

the updater should be downloading from my mega link but it seems like it's nor working for you

[void pond]

no, just change the texture size to 2048x2048 with Paint.NET

let me see if I can fix those textures

[upbeat gale]

I pulled an all-nighter, but I'm buzzing with energy!

[void pond]

@lusty pier

[lusty pier]

Thank you

[fresh gust]

Go into the folder that says Portrait_Swapper
Double-click X_MAINBATFILE.bat
Follow the instructions

[languid flame]

Where did I mess up?

[neon dawn]

Repack the mod.

[languid flame]

How can I repack the mods?

[neon dawn]

Download and install the following:
-Na0h_repacker. (Can't find the link, may need to ask one of the modder to get it)
-NAU + .NET Runtime 8.0. (https://nikke-modding-wiki.vercel.app/downloads/NAU.rar_)
-Everything File Finder. (https://www.voidtools.com/downloads/)
-Nikke File Finder by A1teri, this is just a website u can access. (https://a1ter00.github.io/nikke-file-finder/)

After that follow these steps:
#1041208182539825182 message

[void pond]

UnityPy is needed for the tools usage, not for doro tools download

run script 10 to clean the folders, when the scripts fail to swap a file they will ramain in the folders so you need to delete them manually before to make a swap again or run the script 10 to clean those folders

I'll see if I can finish to modify UABEA to add it to the portrait swapper

[languid flame]

where can i download Na0h repacker?

[languid flame]

I So I didn't find Na0h repacker, but I found a repack script by gjopin.
First, I tried to decrypt all files in {%USERPROFILE%\AppData\LocalLow\Unity\com_proximabeta_NIKKE\naps} then I run getfiles.py in the repack script to get original files in folder called original bundles.
After that, I put the old mods in modded files folder then run repackscript.py, this script must unpack assets from old mods and then repack them based on patterns found in original files, the new repacked mod's files must be in folder called Results.
But after doing all of that, I don't see any files in Results,
and I checked both script files, it gives me no change made to the original files in cmd.

[neon dawn]

I've never used gjopin's repacker so I can't tell.

Found the link to Na0h's.
https://mega.nz/folder/IT0xySZJ#eYi5p8-1SPUUSwumfp1Cew

Files in "bundle_files" folder should be "bundle type"

After that run the "repack.exe", this should be the result if u succeed.

[crimson bane]

When you create a mod, do you have to draw what you want to do?

[crimson bane]

when I put the naps folder in A1ter, it doesn't load, nothing appears

[ruby obsidian]

Lobby mods still not supported in Danieru's NMM right? Is it gonna be updated sometime or he just leave it like that

[ruby obsidian]

Na0hRepacker is in the Doro Tools, it comes with all other tools

[crimson bane]

What should I put on the A1teri website?

OK, well it doesn't work on my side

[ruby obsidian]

Put these in a folder and upload that folder on the website

[crimson bane]

thanks you

[crimson bane]

I found a character, c010. What do I do?

[ruby obsidian]

You use that site to find character codes, once you find the code you need you'll find the file in the "naps" folder C:\Users\%USERPROFILE%\AppData\LocalLow\Unity\com_proximabeta_NIKKE\naps. Just copy-paste that file name in your search bar, or alternatively, download Everything app to find it faster

You'll use NAU to decrypt those files. So first find the file, second drag the file onto NikkeAssetUnpacker.exe and then you'll have the same file but with .bundle format. Rest is depends on what you wanna do

[crimson bane]

ver 00, is this the file?

[ruby obsidian]

As you can see, all file types have "aim", "cover", blabla on top. First you need to know which one you looking for. Let's say you were searching for Rapi. Her ID is 10, so it's c010. You see 3 files here for her "cover". c010 00 ... is her default form. c010 01 is her first skin and 02 is the other. Again let's say you need her default cover, so you need the first one. Which is: 7eb36cebb6d23867ae6046986a7ed88d

That's the file name yes, you'll copy that and search in naps folder

[crimson bane]

ok, and why are there 2x 00?

[ruby obsidian]

What do you mean? Default versions are 00

[crimson bane]

How do we know which file it is?

[ruby obsidian]

I literally just told you

[ruby obsidian]

Send a bigger screenshot, showing their path

[ruby obsidian]

I don't know why it shows 2 for you but it's the same file anyway, just do it

[crimson bane]

in any case, it can't find the file :/

[ruby obsidian]

Do you currently use a Rapi mod?

[crimson bane]

Yes, I was just going to test it by repairing the game data, we had the same idea x))

[ruby obsidian]

Mods overrides the original files. So yeah, disable the mod, relaunch the game and try again. You don't have to go for a repair, it'll download the missing file itself

[crimson bane]

he still can't find

[ruby obsidian]

It should if you disabled the mod and applied, then launch the game and then quit again

Sometimes people remove the tick from the mod but forget to click apply, are you sure you did correctly?

[crimson bane]

I unchecked, repaired and launched the game

[ruby obsidian]

Try some other file to see if you can see them

[crimson bane]

why does it work for one but not the other?

[ruby obsidian]

Because this one is for her 01 skin, that means you did not disable the mod correctly

Just delete or move the mod out of the mods folder and launch the game again

[crimson bane]

still not

[crimson bane]

I do this?

[crimson bane]

I just tested it, it's better like that x))

Sorry, I'm really not comfortable with English.

[ruby obsidian]

Hey no worries, it's totally fine with me. I hope I was able to help

[crimson bane]

Yes, better than the wiki ^^"

[crimson bane]

I drag the .bundle into assetstudio but nothing appears

[ruby obsidian]

What does it say? There should be a command line too

[crimson bane]

nothing, just "preview not available"

Is it me who is stupid or is the tutorial complex?

[crimson bane]

I don't have the command prompt behind

[crimson bane]

when I restart it, the console logger does not appear

[final leaf]

the console isn't necessary, it doesn't appear for me either. he is most likely using a different asset studio that logs what it's doing in the console

[ruby obsidian]

Still, there's nothing in "asset list" tab when you drag the file onto Asset Studio?

[crimson bane]

Nothing

[final leaf]

what file are you trying to see? send it here. lets see if we can open it on our end

[final leaf]

also, which part of it did you not understand? asking so that I can try and make it easier for people to understand.

[crimson bane]

So far, it's fine, I just don't understand why it doesn't work.

[ruby obsidian]

Can you send me the original file too

[final leaf]

that's why

[ruby obsidian]

Maybe adding gifs would be helpful. I'd say video but gifs catch attention quicker

[ruby obsidian]

I decrypt it with NAU again and now it works

[final leaf]

yep

if it was not encrypted to begin with

so putting it in NAU only encrypted it, and then will need to be decrypted to be open it

[crimson bane]

I am in process asset

yet, I had put it in NAU

[ruby obsidian]

Can you try opening this?

[crimson bane]

It works, I don't understand why it doesn't work when it comes from me

[final leaf]

when you put it in NAU, what did it say in the console?

[final leaf]

v24 key is missing?

check your NAU folder, open keys folder

[ruby obsidian]

I was gonna say that but they never mentioned errors so I thought everything was fine on their end lmao

[crimson bane]

ok, I have the files and renamed them, do you advise me to do it myself or by AI?

[crimson bane]

It's good for the keys, I'm stupid x))

I don't know how to draw with a mouse.

[final leaf]

well, you could use a stylus if you are more comfortable with that.

[crimson bane]

No, I don't have it lol

Is it possible with AI? I was vaguely told that.

[ruby obsidian]

I mean I also use AI but you kinda need Spine for that to work

[crimson bane]

Go ahead, I'm listening to you carefully.

How does it work?

[final leaf]

Spine is a paid software by esoterik

[crimson bane]

ah, so it's dead for AI too

Well, it's not possible for me, so at least I would have tried.😅

[final leaf]

well, there is a tutorial by Na0h in the wiki (mod suggestion page), where he showed his way of drawing. so maybe you could try and see if you could do something similar with AI. it will be hard definitely, but on paper, the process is same.

[crimson bane]

what is ai?

[final leaf]

wdym?

[ruby obsidian]

He doesn't use AI there, Lady means maybe you can re-create what he does with AI

[crimson bane]

What is the link for AI?

[ruby obsidian]

And honestly obviously there's a limit for what you can do with PNG editing but still there are many good mods like that, @frank finch also does it like that

And I love Winter's stuff really

[final leaf]

he didn't use AI. he drew/modified it by himself. as Rwyn said, I only meant that you could try and use your AI to do what he did by hand.

[crimson bane]

I understand, but which AI should I use?

[final leaf]

what issue did you face when you tried to get them?

[ruby obsidian]

I'd say first watch the video to get an idea. As for AI, why not just Stable Diffusion with a nice model

[crimson bane]

that's to say ?

Where can I find the video?

[final leaf]

yea, those "needs manual processing" most like means that hose specific files have a "bg" and/or "acc" in those skin, so those can't be swapped with the same method (if those bundles belong to the skins I think they do). and I don't remember how those swaps were made, maybe someone else can help you

[final leaf]

https://nikke-modding-wiki.vercel.app/modSuggestions

[void pond]

what about the other swappers? the problem is only the portrait swapper?

your NAU folder has got all the keys from v0 to v24 right?

do you know which script is the one failing?

the character swapper saves the files right?

ok so the problem is not UnityPy on this case

try running A__GET_RAW_FILES.bat first

can you open them with UABEA or AssetStudio?

tools for modding manually, it's what We used before doro tools

https://github.com/aelurum/AssetStudio/releases/download/v0.18.0/AssetStudioModGUI_net8_win64.zip

https://github.com/nesrak1/UABEA/releases/download/v8/uabea-windows.zip

ok I can open the files with AssetStudio so they are decrypted properly
now run scripts 2, 3, 4, 5 and 6

run script 7

do you have a folder in "Repacked" now?

any error on the cmd window when you run script 7?

your repacked folder is empty right?

oh there is a problem with the paths it seems, the textures should be extracted to the folders "Extracted...", not in the same folder where the bundles are located

do you have all these folders?

clean the folders running the script 10, then run get raw files again and run only the scripts 2 and 3

check your folders again

the textures stay in the folders then?

right-click on the script 3>Edit with IDLE>Edit with IDLE 3.13

click on run>run module

that should display the error I think

the process is not finishing properly..... so maybe the problem is indeed UnityPy version

that is the version you have I think, because 1.21.0 was failing for you right?

I use 1.21.0, try with 1.23 then

maybe UnityPy developer fixed the issue 1.22 had for NIKKE bundles

on 1.23

oh you don't have the bundles still loaded on UABEA right? if you loaded one of them on that program

that can block the file and the script will fail to modify it

you will have to do it the manual way using UABEA I guess
There is a guide about it here: https://nikke-modding-wiki.vercel.app/modCreation

UABEA CLI modification is giving me a headache but if I manage to complete it I'll replace UnityPy for UABEA CLI for the portrait swapper

that is just the code, dw about it

👍

[languid flame]

So this packer does all things.
Decrypt the naps folder, unpack old mods, and repack them?

[scarlet sedge]

is there a way other than opening the game to know which skin is which(ID wise)

[void pond]

https://kxdekxde.github.io/nikke/characters.html

[hard iris]

hi anyone can help me? why i install mod not success
i readed guide use NMM, but nothing change when enter game

i get some file MOD from Modded-assets, when trying use NMM, but nothing change

[void pond]

There are some errors based on what I can see on the screenshots:

1. you have 3 mods for 2B "standing" applied at the same time when you should have only one active, multiple mods active for the same character model generate conflicts for NMM.
2. NMM folder should go in the same drive than NIKKE game but not inside NIKKE game folder. Example:
   C:\NIKKE
C:\NMM
   https://autocompressor.net/av1?s=GhMcUuC3

[hard iris]

oh sorry, i trying do same video, but nothing change when enter game
my path game :
:D\NIKKE
:D\NMM_0_3_1
my setting game all high. but nothing change (i did try moran / sora skin mod) when appy mods,
and i checked path D:\NIKKE\game\nikke_Data\StreamingAssets\aa\StandaloneWindows64 (got mods folder), but nothing change
-you have any other way? help me

[hard iris]

I did as you guide, exit tray icon nikke before use NMM (run with admin)-> deactivate all ->apply-> then activate all -> apply-> notice Finished applying... -> Close NMM-> run GAME Nikke-> Nothing change
-Maybe i delete game, and down again

[hard iris]

worked ! when i redownloard new game and use new NMM 0_3_2
Thank all guys support me 😆

[crimson bane]

Why doesn't the texture load normally?

[hard iris]

anyone have mod guide swaps costume nikke? I want to change default skin to paid skin , ty

[tawdry cape]

seriously ? fucking NM broke again ?

[hard iris]

oh sorry NMM worked, but i found some mod swaps costume from pinned messenger, all worked, but missing some character, i want try mod
if can't, it's okay, tks you

[crimson bane]

Does anyone know why I have this?

[tawdry cape]

is there a SMART modder here who did non payant EVE costume?

[elfin edge]

Better work with this summer update I need that rapi skin

[tawdry cape]

i'll buy the skin only if mods will supress her shirt

who wants to pay 60$ to not see her beautiful breast

[elfin edge]

I like the skin but I'm not paying 60 for a standing image

[tawdry cape]

considering i use a lot rapi rh i'll buy the skin probably

[void pond]

use RGBA32 for the texture format option when you reimport textures with UABEA, if you leave it on BC7 the texture is corrupted like that iirc

[rustic silo]

Sorry if this is a dumb question, the wiki says to look for this directory to find the encrypted assets:

\NIKKE\Unity\com_proximabeta_NIKKE\naps

Where is this? It's not in either of these folders:
%USERPROFILE%\Appdata\LocalLow\com_proximabeta\NIKKE\
F:\Games\NIKKE (this is my install path)

I did global search on my C: and F: drives, and there's no folder "naps" or any of the encrypted filenames I'm looking for

[glossy heath]

try %USERPROFILE%\AppData\LocalLow\Unity\com_proximabeta_NIKKE\naps

[rustic silo]

I see a bunch of folders there!

Is there a way to submit a change request to the Wiki to note that correction?

[glossy heath]

well try searching for the encrypted assets there

[rustic silo]

My searches are turning up nothing so far...

Do I need to obtain a newer update of the catalog files that are on the wiki or something?

[glossy heath]

yes you need newest catalog, idk how old your current one is

[rustic silo]

Ah, I just simply grabbed the one listed on the wiki

[glossy heath]

try these

[rustic silo]

Hm those seem to match, getting the same encrypted filenames

I don't need to do anything special like extracting files before I search that directory?

[glossy heath]

not sure what you're doing wrong but it works for me

you upload the catalog files to A1teri site, you get the name and you search that file name in the naps folder

[rustic silo]

Yeah so searching for 2b gives me this

Maybe I should try that universal search tool, Windows search is weird sometimes

[glossy heath]

I can find b9e534a41f07f1567f1f76efa88629f4, her 00 aim

[rustic silo]

Can you send me the folder directory for that file? I want to confirm if the file is there on my end

[glossy heath]

%USERPROFILE%\AppData\LocalLow\Unity\com_proximabeta_NIKKE\naps\b9

[rustic silo]

Would the file be missing if it's already modded with NMM?

[glossy heath]

yes

[rustic silo]

ohhhhh okay, so I need to wipe my mods and start fresh if I wanted to pull a bunch of files

Thanks for the help, I'll try again later

[glossy heath]

@final leaf can you add this to the wiki?

[rustic silo]

Might also be worth putting a disclaimer that any characters that are already modded will not show up in a search

[ruby obsidian]

I thought it was known. I mean if a character is modded it overrides the original, common sense

[rustic silo]

I'm not too familiar with the modding mechanism in place, some game modding techniques don't actually move the original files

Also the modded file is not located there either, that was probably what threw me off, not seeing the original nor the modded file

[ruby obsidian]

It's in the wiki already though

[rustic silo]

Anyways, thank you so much again for the help 😺

[glossy heath]

where?

[ruby obsidian]

Mod creation page

[rustic silo]

These are incorrect

Is my understanding

[glossy heath]

not the one I sent

[ruby obsidian]

Forgot to remove "NIKKE" probably then

Last time it wasn't like that

[glossy heath]

no, its literally different directory and not nikke folder

[rustic silo]

Levi's comment from earlier has the correct location

[glossy heath]

this may depend on people tho, that's why I'm not saying to replace it, just add it in case others have issues

[final leaf]

huh, people still kept resources in c drive? sure I can add it there

[ruby obsidian]

Aren't they there by default tho

[final leaf]

yea, not anymore. tho that was default previously

[rustic silo]

My game and mods are all on my F: drive, but those files are automatically put on the C: drive

[final leaf]

but game recommends to move them to game's location

[rustic silo]

Should I do a full re-install?

[ruby obsidian]

I never get a recommendation like that damn shitup invading my C drive

[final leaf]

you don't need to re-install

open launcher

settings

there should be an option to move resources

[ruby obsidian]

That's a nice addition actually, without having to use a third party stuff or just wasting time mklinking

[ruby obsidian]

Still an average player probably use it default yeah it would be nice if you add it

[rustic silo]

It says it recommends NOT moving them

But you can if you want to

[final leaf]

what happens when you click that?

whatever that is, that's your recommended directory

[rustic silo]

I get made to look like a clown that's what happens

😹

So the default directory is not the recommended one, how bizarre

[final leaf]

it becomes the default one when you re-install

[rustic silo]

Understood, I'll go ahead and migrate

[final leaf]

after the last update, I re-installed, and mine default was the recommended one

[ruby obsidian]

I mean I really can't blame you, even I didn't know that you can do this via launcher now lmao I assume only a very small percentage of the playerbase actually moves their assets to another location

I did mklink that before but I have like 600gb~ empty space in my SSD anyway not really need it

Shitup adding nice things is always surprising to me

[worn mango]

Alright, so uhhh

I’m reading up on the tutorials and stuff, but I wanted to make a version of Pinne that appears in the livestream,

what I’m asking is, should I try looking for base parts and stitch it together like a Frankenstein or should I start from scratch and replicate the art style? For the parts that make up the live 2d anyway

[tender gate]

Does anyone mods Unreal Engine games?

I'm looking for an easy tutorial, want to do some swaps on a specific UE game 🙂

[crimson bane]

how does it work?

[worn mango]

OK, so, im trying to do this, etctracting images and so on, but i cannot for the life of me get doro tools or literally anything else to work

so. am i better off to use spine esoteric? does that have everything i need?

like i cant even get the nikke asset unpacker to work wtf

[void pond]

NAU needs NET SDK 8.0 or later to work
https://builds.dotnet.microsoft.com/dotnet/Sdk/8.0.311/dotnet-sdk-8.0.311-win-x64.exe

and if the scripts to download the tools don't work you can download from my mega directly:
https://mega.nz/folder/ELEmEDyK#U0iobhXNez5nuWALOrYdzg

[worn mango]

i see

i just wanted to draw tiddies man

😭

[worn mango]

either way thanks a ton

[void pond]

there are some guides here if you want to learn manual modding without doro tools:
https://nikke-modding-wiki.vercel.app/modCreation

[worn mango]

literally all i need is to get centi files in a manner that i can go in and edit,

the issue is that whenever i open anything it closes itself as it opens, or shows an error message and then closes

ok, now it DOES work, but its not extracting the files

hmmm

[void pond]

I made a quick guide for modding althought it's with one of the tools from doro tools #1041208182539825182 message

[worn mango]

yea thats the one ive been referencing

using as reference

sorry

[void pond]

two tools*
one of them need 12GB of dependencies to work

[worn mango]

oh i see

im not tech savy bear with me

where do i get the dependencies, the game itself right? NAU is accepting those but wont extract them

[void pond]

https://github.com/kxdekxde/doro-tools/blob/main/README.md

I show the dependencies to install on the linked video

[worn mango]

thanks again, i know it must be annoying to repeat this

[void pond]

np, I like to help

👍

[worn mango]

its starting now, but repack says its missing PIL from image, any idea what that means?

[clear crystal]

Miagi says you need to download all of it . I download mine and put all of it in the same file. The main one will sync with the rest so don't worry

[clear crystal]

Portrait swapper is icon swapper

[clear crystal]

If you load in your own custom portrait then that's a different story. How do you you do that? I have some already made ones not custom one. I also want to have one of my own

Damn it. How do they even know how make custom portrait again??

[pulsar ledge]

Hi... Does anyone know how to fix the error where it stays at 43% of the initial loading screen forever?

[crimson bane]

so we select 002,003,004 and 005 then we move it into 001?

[clear crystal]

No just download everything and click on the 001 file, leave the rest alone. You just have to make sure all the files stay together in one file or drive. The 001 will auto sync with 2,3,4,5.

I mean the original file is like 1 gb ( sort of ), you don't want to wait that long to download it right? The author splits it for a reason

[crimson bane]

Especially since they were all downloaded separately in my download folder.

[clear crystal]

It's meant to do that. Doesn't mean it's unusable or anything

[crimson bane]

I know, I just don't understand the .zip.001

[clear crystal]

It looks like this

[crimson bane]

OK, when it's like this, what do we do with the others?

[clear crystal]

Nothing. The top file is what you use

The bottom 4 just there to support the first one. Give the first one more files

[crimson bane]

okk

thanks

[clear crystal]

No problem

[regal moth]

Does anyone know if miagi's mods that he just put out are able to be used right away in nmm or do we have to repack them? Im not even close to done downloading so a little heads upw ould be nice

[clear crystal]

You can use it right away no repack needed

I use it myself

[regal moth]

aight thanks

[crimson bane]

I have this

[ruby obsidian]

You'll remove the .001 from the first one, then extract. Keep them in the same folder and names like that

[regal moth]

I tried using unarchiver one and it was able to extract right away if its more convienient for you that way

[pulsar ledge]

can anyone hel me with this? it´s been like this for 20 minutes agter i tried changing bursts.

[void pond]

pip install pillow

icons swaps are more complicated so idk how to make a swapper for it

[crimson bane]

Can someone please send me a copy of the c010_00_cover file?

Name: fb8628ea24b0f07b4aa23ca7b6253f83

[broken abyss]

does the game ask you to redownload resources after modding?

[crimson bane]

yes but the source code of Rapi remains untraceable

[worn mango]

It remains invisible

[broken abyss]

i know this is a dumb question, but do you mean rapi or red hood rapi?

i really know nothing about this.

[crimson bane]

just Rapi

rapi 00 on cover

[broken abyss]

oh okay thanks

i was nervous their

there

[crimson bane]

for my part, I can't find it in my files, even after removing the mods

[broken abyss]

can you tell me why aren't the mod on when i have already activated it on nmm?

[crimson bane]

For your mods to work, you need to link the NMM software to the game in its installation folder. Once linked, you put your mods in the NMM mods folder, activate them, and press "apply."

[broken abyss]

yeah... i tried all of that. but when i log on the game it just doesn't appear.

and i've even logged a second time.

[crimson bane]

Check that your mods are working, if you have Na0h's NMM, you can preview the mods. If the character appears, it means it works, if it doesn't appear, it means they don't work, you should update.

[broken abyss]

do you need to like, check the whole thing?

or just some of the added files?

[crimson bane]

if you have cover and aim, check one, unless it's not the same author

[broken abyss]

i checked yesterday, and they all showed up. but they don't show ingame.

[crimson bane]

Otherwise, if you renamed your mods, it won't work. The mod must be named "c***0*(aim/cover/standing)(Author)(character name)

[broken abyss]

i kept the name as it was.

[crimson bane]

did the mods work yesterday?

[broken abyss]

nope

[crimson bane]

So good!

[crimson bane]

okay, so try checking your mods

[broken abyss]

do you mean like preview them or something?

cause i don't really understand what do you mean by checking.

cuz the preview version still works.

[crimson bane]

Prévisualisé le personnage oui

can i pm you?

[broken abyss]

yes

[crimson bane]

ok

[unreal island]

why cant i find unity in locallow

[worn mango]

If I want to remove something from 2d texture like say clothes, I just erase it in the png right?

Or do I need to do something like this? #1041207949508497548 message

[crimson bane]

A mod that makes the character transparent, what is it caused by?

[worn mango]

Removing the asset or making it transparent?

[crimson bane]

a mod makes the character invisible

[worn mango]

Uh ok?

I’m not asking to make the entire character invisible just certain parts of it

[crimson bane]

Ah, I thought you were talking to me about my problem, sorry

Can someone please send me the Rapi cover file?
Here's his name: 7eb36cebb6d23867ae6046986a7ed88d

[clear crystal]

You can use Doro tools to find it for you

[tulip lagoon]

Hai, I checked pins but I'm a little confused, can someone tell me how I can swap ingame skins and not mods?

like Helm's Gacha skin over default Helm ?

[crimson bane]

even if the game file is not found?

What causes a black square in Ludmilla's textures?

because even when in the normal texture, my NMM displays black areas

[glossy heath]

use doro tools

[tulip lagoon]

me partially confused
it shows alot of files but no exe
which am I supposed to open?

I saw some screenshot here from another member which uses a pretty clean GUI of doro tools

but idk where to find it

[glossy heath]

run mainbatfile

should be at the bottom

[tulip lagoon]

ow thanks

[glossy heath]

not sure what can cause that, did you download requirements?

[tulip lagoon]

yup, I downloaded everything

oh wait my python is 3.12

maybe it's that

[glossy heath]

unlikely but worth a try

[tulip lagoon]

other bat files are working such as burst swapper but not character swapper

[glossy heath]

maybe anti virus flagged something?

[tulip lagoon]

nah antivirus is off

what does GET_RAW_FILES do?

in character swapper

[glossy heath]

part of the swapper to swap stuff

downloads the raw files from the cloud or idk how to call it

maybe try redownloading the swapper

[tulip lagoon]

well I'll look into it later, the lobby swapper is working so I must ask this first

what goes first?

Helm 02 or Helm 00 ?

( Need Helm gacha over Default )

[glossy heath]

00

[tulip lagoon]

well this stuff isn't working for me although I'll try redownloading doro tools manually

@glossy heath is there anyone here who does do skin swaps and wouldn't mind sharing them?

[glossy heath]

most ppl can do that if they have the swapper

[clear crystal]

Unless you have some modded skins you don't have to get raw files and do it manually, You can use the X_MAINBATFILE in the swapper and it will help you.

[tulip lagoon]

I sent a video above

X_MAINBATFILE doesn't open for me

a cmd menu pops and closes itself

^

[ruby obsidian]

Pregnancy = but when cata makes a sex mod people lose their minds lmao

[clear crystal]

I didn't notice the video. That's one hell of a flash. Maybe it's broken somewhere, I'm afraid I can't help much on that

Possible python app got corrupted or something since practically nothing works without that thing

[rotund juniper]

Title screen mods are still working?

Another question, if nmm keep loading file preview for long time (looks infinite), is it file broken or no?

[tulip lagoon]

preview does not work for everything

it's np

[rotund juniper]

is there another way to see like a preview?

[clear crystal]

see it ingame

[rotund juniper]

boring, sincerely

[clear crystal]

beside previewing in nmn, there's no workaround

https://tenor.com/view/napoleon-there's-nothing-we-can-do-napoleon-pyritesian-gif-17490332095914688011

[rotund juniper]

About title mod, can i replace for any other video?

I want to replace to a video with 13min

I dunno if its possible

[clear crystal]

Title? You mean Lobby mod?

[rotund juniper]

That file called mov_title.mp4

[clear crystal]

I don't know what that is. Can't help with that

Maybe someone else may know

[rotund juniper]

it's here

[clear crystal]

Huh I never touch it. Maybe better not touch it. It's in the official game files after all

[unique vale]

you can just replace any video and have same name

done it before

[clear crystal]

Oh? Interesting

[unique vale]

nothing breaks

[clear crystal]

There were some title mods I have seen in the past but I thought that was just some outside edits

[clear crystal]

You heard Dquags. You actually can and no needs for doro tools.

[crimson badger]

I'm having issue while using the nikkemodmanager, anyone knows what‘s this problem

[tulip spoke]

Hi, I'm a modding newbie. Today is my first day trying to unpack Nikke, and I want to extract the character Spine models. However, I heard they are encrypted. All I've managed to extract so far are the story CGs. How can I extract the character models?

[ruby obsidian]

You can find character codes in KXDE's or A1teri's websites https://kxdekxde.github.io/nikke/characters.html, and when you find the file locations you can decrypt them with NAU and extract them with AssetStudio. All the stuff you need is in Nikke Modding Wiki: https://nikke-modding-wiki.vercel.app

[tulip spoke]

What is the Unity version used for decrypting the files? When I try to decrypt, it shows that no Unity files can be loaded.

[ruby obsidian]

Hmm try using the original file sometimes you don't need decyrption

[rotund juniper]

is it possible put video on lobby screen too?

[worn mango]

How can one add assets to a character, as in like, add an extra object

Same things goes for removing an object

Like say I add Marian prime’s hat onto modernia, how could I do that

[austere barn]

Try re applying the mods multiple times before entering. If that doesnt work, follow the 43% method but do not enable all mods. Slowly enable one at a time (turn one on and apply multiple times again, enter game, see if mod is working, if it does, leave game and turn on another, repeat), do this until one mod causes the problem again so that you can identify the problem

[steel rose]

I sincerely hope this man never gets another level skip on his collection items ever again.

This website is utter dogshit

[austere barn]

Apparently its a way for him to earn money without asking for donations so

[steel rose]

And yet he could have just used one of the 10000 link shortener websites and achieved the same thing without me seriously contemplating hunting the servers down for this website to wipe it's existence from the map

it's an abomination

[worn mango]

Where can I find the npc files? I can’t seem to find Yuni (masked) or Red shoes.

[ruby obsidian]

You need Spine for that. Simple editing, color changes etc. can be done via png editing but if you want extra stuff on top of an existing asset, you need Spine

[worn mango]

sigh
Of course
I don’t exactly have $400 laying around though

[worn mango]

Not even unity works?

[ruby obsidian]

I know the feeling very well... I even got banned from Spine forum for 15 days for calling them out lmao but in the end it is what it is

[worn mango]

I get it if it’s liscencing but like come one, at least keep the features in the standard version

[ruby obsidian]

Because Spine literally monopolized the 2D texture stuff, there's really not much alternative, as most games use Spine itself and other softwares really can't open those files, unless exported as json. And it's still not good as Spine. Fucking capitalism ruins my life lmao

I ask my friend catalyzer to downgrade files sometimes so I can work with 🏴‍☠️ version of Spine, it's an old one of course. Still it works for most cases though

Really only downside is that the latest one is better for quick works. Auto weights blabla. You can ask someone to do this for you, I'm sure people would help

[worn mango]

I mean I might

[worn mango]

I wanted to try doing full animations mainly, so it’s possible

Like animations using edited and the original models

But I might just try doing it the old fashioned way at this point ffs

[lusty pier]

it forced me to wait another hour because I was afk on the site and the captcha expired

[worn mango]

….welp.

I think it’s because I went a little outside the lines and erased some stuff but ffs

That leaves me with no choice but to use spine

[final leaf]

that looks like texture size issue

check the mod creation page on the wiki and go to troubleshooting section

3rd point

[worn mango]

I checked and it’s 2048x2048 soooo

Ok hold on let me show you what I did to it

I did get answer on if adding or removing stuff would work (no)
However I think my mistake is that I went outside the normal boundaries in some places

So now when it uses it, it’s confused as to why it’s poking out of the expected zone (I think?)

Either way, I’ll stitch it together in some sort of preview so it’s not a total loss

[final leaf]

going out of the boundary shouldn't cause other parts to move to random location though. it would only cause that part to show up in different location. let's say you were painting on the shoe and went out of the boundary. the shoe will look normal and the extra part of the shoe that you painted will show up on a different part of the body, maybe the hair or the face.
Did you modify the entire body and went out of boundary in every part?

[worn mango]

No just a few

[final leaf]

the midriff, doesn't even show up in its original spot

open the original texture on Asset studio

[worn mango]

Ahhhh wait that’s it

For the midriff I superimposed an edited version I compared to the pelvis

Then merged the pelvis
So,
Maybe it’s out of alignment?

[steel rose]

Same, that's when i started really getting pissed off

[final leaf]

and then open your modded file on Asset Studio. check if these infos match with your modded file compared to the original texture

[final leaf]

could be

[worn mango]

Alright hold on

[final leaf]

but I still think its a texture size mismatch issue

[worn mango]

Well number one the modded file doesn’t have the edited thing on it. Number two it looks normal. So, idk,

I’ll try recompiling and see if that does anything

Oh duh

[worn mango]

It’s because I rotated it by mistake when I edited it

Thanks again
I’ll let you know if still have a problem

[worn mango]

@tulip lagoon your archive files are broken as shit

[trail nymph]

lol i dont think thats gonna get fixed unless some other modder will fix it

[worn mango]

sounds about right -_-

[ruby obsidian]

What's wrong with archives?

[sour tendon]

Hi guys I'm new to this, am I doing something wrong here? Why is all my mods not working(I'm using NMM 3.2 and started NIKKE with the official launcher after apply the mods)

[austere barn]

Did you do the select game path thing

[sour tendon]

yup

[austere barn]

Hmm

Can you dm me the mod files really quick? I’ll test them on my end

[sour tendon]

Yeah of course, thank you

[austere barn]

👍

[austere barn]

Is the nmm folder in the same drive as the Nikke folder with the game

[lament sparrow]

does it have to be in the same folder as the nikke application as well or just same drive

[austere barn]

I just put mine in the same folder as the nikke folder

but yes same drive

[lament sparrow]

I see

it worked, thank you

was having the same problem lol

[gilded nest]

Sry to ask but I can I get a guide to install mods in android..? I started using discord after many years and it's quite confusing...thanks

[ruby obsidian]

Mods don't work on Android anymore

[gilded nest]

Oh ... how sad...thanks tho

Hb pc?

[ruby obsidian]

Yeah only PC

[gilded nest]

Oh I meant is there any guide for pc version?

[ruby obsidian]

Everything you'll need is here https://nikke-modding-wiki.vercel.app

[gilded nest]

Many thanks!!

[sage wraith]

hi, I'm trying to use Doro Burst Swapper, but it doesn't make any files in "swapped". After finding successfully characters, it has problem with processing bundles: "Error processing ...\Burst_Swapper\BundleForTheSwap\decfc685f66aab40346b91cdccdabed4: params must be an instance of BC7CompressBlockParams" (in example I used Rapi 00 to Neon 00). It happily ends this part with "3___Bingle_repacker.py ran successfully".

Then, idk if expected behavior, it lists all characters in format:

    "Character": "Delta",
    "ID": "c020",
    "skin_code": "04",
    "hashed_name": "

some have hashed names, most don't. Then checks hashed names a lot after each processed file. And it ends on happy note with "All scripts ran successfully.", but nothing gets created in "swapped".

Idk if related, but anything related to UnityPy 1.21.0, was a problem for me. It would crash when at this part on installing essentials. Together with gpt I tried adding, suggested by it, 3.11 python (instead of my current 3.13), but what finally worked was "upgrading" requirements.txt to UnityPy 1.21.3.

[clear crystal]

Does anyone know how to use the Physics_Fixer in DoroTools? How to use it?

[tulip spoke]

Why does it show that the Unity file cannot be found when I load the successfully decrypted bundle file with Asset?s the file corrupted?

When I put the "characters" file into NAU to decrypt it into a bundle file, and then put them into Asset to view, it shows no Unity file. But when I watched others' tutorials, they could do it. Why is this? What did I do wrong in the process?

[next steeple]

do anyone have gacha cinderella glass princess mod over default costume

[worn mango]

Whenever I tried to extract it it kept saying some of the files were corrupted

Like
It extracted the rest just not some of them

Like the centi files for example

[ruby obsidian]

When it comes to parted archive files you normally only unzip the first one, i.e. XX.zip.001 and the archive program will do the rest, extract the others on its own. Unless you change the file names, they all should be exactly like this: 001, 002 etc

I don't get your problem really, are you trying to get files out of the archive separately or something

[worn mango]

When you said this I realized I was being stupid again and it worked

However I have a new problem

why is there an Anne mod in here?

[ruby obsidian]

Well this server has rules, because certain character previews may be against Discord's Terms of Service and that might nuke this server, but overall modding has no rules. I've seen nude mods for almost all characters until now really

[worn mango]

I mean fair

But like
Seriously? Her?

[ruby obsidian]

Haha yeah it do be like that sometimes. I've seen one Signal before, like, who ever actually used Signal in game bruh

[worn mango]

I mean
Fair

Well in any case I’m going to fix my crow mod, one way or another.

[ruby obsidian]

You got this 🗣️

Tho why didn't you just take a screenshot instead lmao

[worn mango]

I’m too lazy to

[worn mango]

Hey where can I find npc files? I wanna edit Jien next

[torpid bane]

damn I didn't know crow was that detailed with a handful layers off

[burnt nova]

Has anyone else had trouble extracting Miagi's mods?

They downloaded just fine albeit misrecognized as like "002 file" because of the .002 suffix. I take it out so it ends in .zip but then I can't extract them.