#Fl to voicemeeter to play guitar :D
1 messages · Page 1 of 1 (latest)
Share your current setup, and voicemeeter routing.
My guitar is plugged on my Minifuse 2 and the sound goes into FL studio
Im happi sound = great etc
BUT
If i want the sound to go to Voicemeeter Potato so i can make people happi cuz i play the guitar
I think voicemeeter has the signal but it is WEAK
and people just SLIGHTLY hear it
even with master and everything BLASTING
idk what are peak meters
First input = my mic
and the two other are possibly the guitar
the 3rd one is getting the signal
And where is the signal peaking in VM?
like what the highest it reaches ?
Sure.
both of them has signal (i guess the first one is the raw sound of my plugged guitar and the other one is the one that goes through guitar rig)
You have access to 12dB of gain from within voicemeeter, use that if you need to.
Wait a sec, why are you using vociemeeter if you have loopback on your interface
You should be using the virtual ASIO driver voicemeeter provides.
in fl ?
Yup. Set your ASIO driver in FL to one of the VAIO things.
Under the ASIO options.
Give me a sec to wrap my head around this again.
You need to pass the Real mic/guitar into Voicemeeter, then process it, and send it back to VM, then send it to your headphones/discord.
Kinda yes
In the past it worked it did like: Real guitar plugged in audio interface, sound goes directly to fl studio (to process it) and it goes to VM and in discord and Headphones
Alright, my brain is working now.
In voicemeeter, HW input 1 is your mic, HW Input 2 is your guitar.
Mic should be routed to the first "virtual send" (B1)
Guitar should be routed to the second virtual send (B2) (Or B3 for VAIO3)
In FL, use the second Virtual ASIO device. (or VAIO3)
Your guitar should go from your interface, through voicemeeter to FL, processed by your effect chain, then sent back to vociemeeter in the "Virtual inputs" area.
Send this to (B1) again, and probably A1, your hardware output/headphones.
From here, set discord to use the first virtual audio device, which should be a mix of your Mic, and the processed guitar from FL.
WDYM? you see it all here
Oh lord yeh
im blind af
sryy x)
In FL the only asio thing that works is still minifuse asio driver
What do you mean by this? What does "works" mean here?
I mean that this is the only asio thing that makes sound when i play
and the sound goes directly to my hearphones
Do you see the signal bouncing in voicemeeter?
If there's significant delay/latency, you may have to restart the VM audio engine.
Also ensure you're using the ASIO output, not the WDM/similar.
I had some delay at first, but switching from WDM to MME and back fixed it on my end
Am i doing great ?
Thhat looks right here.
yeh thats why idk what im doing wrong
Did you try the restart?
Did you try the MME thing for the inputs?
idk if it'll help but i have a program call RSmods installed (a thing for rocksmith)
Yep for both
i've been struggling for days so i restarted a lot
How does your loopback work on your interface?
Do you have much control over it? (is the volume down for that device in windows?)
Since your interface offers loopback, I'd 100% recommend going that route instead of Voicemeeter.
can you explain what is the loopback plz
Cuz my current audio interface setup look like this (ima draw it 2s)
front
(blue = led turned on)
In FL Studio, when using your Minifuse driver, what outputs do you have?
In the windows audio settings, pull up that input device.
?
Double check the volume seen here
they are 100% both
When you play audio through them (in FL) do the levels look the same?
The mic should show activity on the loopback channel at least.
You're on the output side of things, look at the input
my microphone does move when i speak
Hmm. That's cursed. The interface should be sending data from FL, through loopback, and it should show as activity on that page.
Tada, that's the issue
The windows device was set to a low level, so your original voicemeeter setup should be as it was.
However, I still think you should use your loopback for this.
Like we say in france CHAMPAGNE !!!
Yeh but from now i'll just be happy with that x)
If it works, it works.
Thank you so much for your time
No problem.