copy timing of 2 samples

[iron topaz]

i highly recommend using a larger grid snap option, click the magnet in the top left and set it to "Line"

you can quantize these samples by clicking the drop down in the top left > tools >quantize start times

now when you draw in a sample it should snap easier

[misty adder]

@iron topaz thankyou i've done that, but that is not really what i meant.

[iron topaz]

🤷

i'm not sure what you're asking then

[misty adder]

sorry for the bad explanation. but i mean i wanna copy the samples stands so like 1 clap is at 0.1 seconds the second clap at 0.5 seconds. those positions i wanna put the other sample in.

[iron topaz]

you could duplicate the clap, make it unique, and then replace the sample, the start time should be the same for whatever other sample you'd want to put in

[misty adder]

so that what i mean, but i've done it manualy now but i'm wondering if there is a quicker way.

[misty adder]

i will try, thankyou.

[misty adder]

not sure how you do that.

[iron topaz]

not really no

i suppose

the quicker way would be to just use the channel rack instead

that way you can just paste the midi into the other channel