panchroma filament mat PLA

[latent eagle]

Hello guys,
I want to use this filament in my Bambu Lab P1S with a 0.2 mm nozzle and AMS system. I used the generic PLA profile, but it didn’t work for me. Can anyone help me with this, please? https://ca.polymaker.com/products/panchroma-matte?srsltid=AfmBOorUKDsbKXVBe0AjqjHlngF-zqDS97W7qp4D1ozBPfW1_inTaPcE

[olive cipher]

What didn't work? If you could explain what happened that'ld help. Pics also help

[latent eagle]

printing very thin first layer only

[olive cipher]

Did you also change you nozzle size in slicer settings by the way?

Just to confirm, you meant 0.2mm nozzle diameter or were you refering to layer height?

[latent eagle]

yes i did change. Even I printed with Elegoo PLA filament its work works well,

I got a new First time panchroma filament mat PLA

[olive cipher]

What are your current print settings?

Do you have pics of the failed prints?

[latent eagle]

I did use generic PLA and now panchroma filament mat PLA

[olive cipher]

Bambu generic profile works decently

At 0.4. Not sure for 0.2mm 😅

[latent eagle]

i use 0.2 mm

[olive cipher]

Pics of your failed prints might help us understand better what's going on

[latent eagle]

I did not click

[olive cipher]

Hmm ok

What are your current print settints?

[latent eagle]

But I did notice filament is not coming out from nozzle

[olive cipher]

Speed, temp, etc

If you manually load it does it come out?

[olive cipher]

With 0.2mm, the filament dwells longer in the hot zone which causes it to swell and may cause clogs. Though polymaker's jam-free technology does help with that.

[latent eagle]

ok

[olive cipher]

How about speed?

[olive cipher]

Seems a bit too fast in my opinion for a 0.2mm nozzle