#tech-support
1 messages · Page 215 of 1
@noble tendon hello man I saw in history you had perma crashes during process 6 as well and wanted to know if you managed to fix it
i just restarted my pc
and used dx11
You need to update regardless no way around it

Anyone have a fix for the gamepad UI broken ? Even editing the gamepad on a ini file is fine for me 😢
kk, neither worked for me...have fun in my stead lol
Besides it will be up on cachy repo or aur repo
Soon enough
Never takes long
is it the memory sheet for you too
when I played through process 6 yeah that phase took me 1h+ instead of 10 min
and since then it has not stopped, sometimes I have a couple minutes somethimes 10-20
Do I need to remove the existing discord folder in /opt or just unpack the targz there and it'll replace files?
Also are config/login info files saved somewhere else or in /opt/discord?
maybe its just something with that stage i have no clue
Have you tried yay -S discord first ?
To see if there is an available update on AUR
Yes, 0.0.134 is not available yet
i see WARFRAME 
what the hell happened to my launcher? the thing is smaller and theres a big gray box around it the box not visible in photo
relaunch it
this the launche
restart your computer
fixed it
You play too? 


game is bored at this point
with weapon nerfs on fun weapon
i quit like before covid
Ahh
randomly download the game and log in to see whats up thats it
I only play if someone calls me for help
or if new story drops
We still have blast technically Kestral prime a billion bounces build lmao
Although it has melee influence soo not different from any other build from the past 2 years lmao

nah
og blast was fun
red blst crt lvl 1000 nox dies in one hit
now all i do is spread democracy

hope this helps!
Oh well for now I just unpacked and copied it to /opt/discord, its working for now
with how often discord tends to update on linux, I think it might be a good idea to do that regardless
just so it won't bother you anymore
fair enough
at this point it might almost be better to just use the web version, all apps are becoming glorified web browsers at this point thanks to electron

Yeah i get what you mean
@vast marlin you should play WOT heat
Suicide tanks ftw

Can Endfield be played on Linux?
yes
Wait rly?

If it works it works 
Is there something specific?
Blue screen ?
only this dump file
Im not gonna open that
happened this in the morning, turns out it was my anti sag gpu fault, and then it was already fixed except the crash
So why don't you read it for me
What are your specs btw ?
And driver version
And windows i assume
i asked claude recently and he said
Back to your dump:
APPLICATION_VERIFIER_LOADED: 1
Failure.Bucket: INVALID_POINTER_READ_AVRF_c0000005
AVRF = Application Verifier Runtime Framework. This isn't a typical crash — the Unity runtime is actively monitoring memory access, and it caught a violation.
rcx = NULL during Unity's rendering loop → most likely an object in the scene was destroyed but its reference wasn't null-checked before being accessed.
Current Suspects
Bug in Endfield itself — not hardware, not drivers
Check whether similar crashes are reported by other players on the same patch version
Unity 2021.3.34 — this version is fairly outdated, Hypergames hasn't upgraded the engine yet
in event veiwer its written unityplayer.dll faulty module
Try Repair files ig
ryzen 9 7900
32gb ddr5 6kc30
2x 1tb nvme + 2x sata 3
rtx 4090
b650i mpg edge wifi with latest bios
596.25 nvidia driver version
win11 25h2 latest build
i did, and... still crashing
Does it js randomly crash or does it crash after doing something specific
Ah perhaps C++ runtimes
randomly
sometime 5 mins after playing the game, sometime 30 mins
Endfield doesn't have any different dependencies right?
i will try to reinstalling the runtimes
Try reinstalling the game itself
I run it via faugus
aight
All the necessary packages are downloaded
There are no other necessary packages other than what windows already has
Nope just proton for translation really
Cause linux of course
I tend to be on arch linux or cachy os
But it is up to you whatever distro you want
guys can I ask for this
apparently wuling city has its map updated
and now I have 2 ziplines inaccessible 
since i can't access it to remove it myself
...is there a way other than sending mail to customer service?
so, when i start my game by clickin the "play" button on the laucher, it start then closes itself 10s after. When i click the "start with Direct X11" and start the game, the game screen freeze on the "hypergriff" screen but i can hear the title screen music and for some reason i cant alt tab when launcher is opened? lol
What have you tried so far ?
rn, i tried to start the game and closing the launcher, it """"fixed"""" it, but the game feels extremely laggy and alt tabbing doesnt work, i have to press win+d to go back to my desk either it's not working
Try repairing via the launcher first
Otherwise try repairing C++ runtimes
kk thanks
ok nevermind, it just happens with every fullscreened game for some reason..?
ok so actually, its not every fullscreen game, it's like, game with launchers; Endfield had bugs, HSR had bugs, FF14 had bugs, but ultrakill and terraria has not any bugs
ill try to reboot my pc
Sure do that
Random bug I encountered caused my old hardware I got through an electric gate I didn't power lol
alr fixed it, just some windows update that randomly decided to pup an hour ago and fucked my pc while it worked well before? lol
Ah good old windows
🔥
forgot to close my bsod debugger lmao
its amazing that vulkan launched after removing one line in the boot config 
Hi Linux chat
I've heard it's good
Runs well on Linux?
Surprisingly well actually
140 fps on a 7900 xtx at 4k
The login for one of the main managed switches on our campus is literally password. And they pay someone to manage our network. Luckily they have a secondary Unify control panel for the APs but that's still funny. It's also what allowed us to essentially send commands to all the LG WebOS TVs on campus via ssap. There is several more oversights and security flaws in the entire network. Do I tell them about it or not? I graduate my A level in a month anyways-
Wowie
Then my 5070ti should have no issues at 1080p@120
What CPU?
UE5slop usually terrorizes my 5700x3d
Tell em
14900K and it's RE-Engine
So really well optimized
Hmmm
Endfield spikes the hell out of my CPU too lmao
Specifically in Wuling city I get rough fps drops
Ive had this issue since a few days after 1.0 came out
It pegs one core at 90-100% in the city and my game stutters when I walk around
If I stand still and move the camera it's perfectly smooth
I tested this on Linux and Windows and it's about the same
@proven sundial so i was saying that
power reset in the complex
fuck my notes i forgot to save
well hoping i won't need them anymore shit's already configured
Endfield does run a lot better for me than on windows
OH FOR FUCKS SAKE
fuck your comedic timing xomori

Hey shit happens atleast your os did not break
Someone before had their windows fully broken
Because of one update

I do this funny thing called "disabling notifications for the crash reporter" and suddenly my system never has any crashes

yeah but when your game suddenly freezes it ain't fun
Yeahhhh but like i said latest micropatch
Did something nasty

14900K runs at 6 ghz
Even then it is fully stable under occt
I've had stutters and fps drops in Wuling city since a few days after launch (some patch ruined it)
Same for if I run around the stockade area
Everywhere else is basically smooth all the time
what happened to Huawei 😂
Game is no longer opening in my mate x6
I wanted to grow the factory w a foldable screen
No idea all my other games run extremely smooth
Same
Endfield uses a modified version of ACE anticheat
So it's possible it's just got a bug that pegs CPU
Huawei ? Is that still supported in europe ?
Because my system should not struggle with this game in the slightest
I guess i have to datamine it again
I hate doing it but hey
Atleast it will give me enough info

I know some guys who can probably look into the anticheat and figure out exactly what's happening
after all they're the ones who made endfield work on dwproton and most ACE games work with wine 10.15 and newer
Problem is they're busy and rn focused on other projects
All good things take time
But yeah i guess i'll just have a round of rhetoric being a good assistant again
Compare previous versions

I've had my issue since right after launch, is the issue
It was very very good the first few days, and then some early hotfix ruined it forever
I've noticed no additional lag as of any recent patches
It's just been the same amount of it
I should not mess with ace but hey
As a wuwa dev i guess i can take a look

For research purposes
Annoying for you honestly
Meh just use a burner acc
Pretty much the option
Anyway imma get some sleep
Expecting another 2000 lines of errors tommorow

Done. I formated my PC too just to be in the safe side. Gonna test
No idea, I’m from Mexico. But I played the game on mine during launch and it was fine. Now it’s just closing automatically after updating it.
@barren elbow
hey
could you try to attach additional information to this bug report if possible?
perhaps the map/minimap, and a screenshot of the entire room?
i will try to find a video cause i completed story , was before the final part there
Yeah, didn't work. Even though I even formated windows
underclock your GPU slightly
i'd rather continue trying to figure out what's causing it tbh
might be hardware-related, even though it's only on arknights endfield
Ever since I changed my hardware of place adrenaline is lagging horrible (even though I did formated it after tickering with the hardware)
did you fully reseat it?
My motherboard showed a screen saying it had a new CPU installed (I didn't even touched the CPU) and asked to press F1
So I did
Yeah just did. Didn't work. Even checked if xmp was active
might want to reinstall again
Didn't work reinstalling windows, now I'm trying to an even older version of adrenaline
Okay, I made adrenaline work normal again installing 25.2 version
Now to know how the game will work
So it just my net or game is so slow to open this morning?
could you describe your issue with a little more detail if possible?
So basically I'm just stuck at loading more than normally and game is not responding at loading like endfields exe not responding
Is there still no solution to the DLSS option disappearing issue? I've changed the boot config file, removed one line and added a new one and still no DLSS option. I'm using a 3050 laptop and this wasn't even an issue back then. The game just looks terrible on TAAU compared to DLSS
what have you tried so far?
I've done this one
@lean prawn
- Click here to navigate to [[Reliability Monitor Troubleshooting]](#tech-support message)
- Click here to navigate to [[Windows System Corruption Fixes]](#tech-support message)

I think my issue is a bug man, I did everything, all my games are running fine besides Endfield and it only crashed until then in the new wuling map

I just stopped playing wuwa and it didn't crash, didn't lag at all. Even put the highest quality just to test because I don't like how hot my hotspot get, but it did run fine

yeah this is possibly the case
@desert lake
Is there a way to report? I did through inside game but didn't get any answer
it's been reported already ✅
@regal sail
e?
DLSS/FG options are still missing for you, right?
yes
even after trying this, right?
yes
could you launch the file explorer and paste %ProgramFiles%/GRYPHLINK/games/EndField Game into the leftmost search bar for me please?
@work atm so i dont have my laptop with me, i can later
ok hi
^
k
let me know once it finishes
you can launch the game now
k
check your DLSS settings on the main menu screen

😭
Hello, I updated my game and now that I'm trying to get in it's giving me "Game integrity check failed. Please try again. (208)"
I reset my laptop and then did the verify game integrity through launcher and I'm still getting the same error
Exception Encountered Or ANY Connection Issue [Error Code: 207]
- Change your DNS manually to
1.1.1.1 (Cloudfare),8.8.8.8 (Google),9.9.9.9 (Quad9), or use a service such as Cloudfare WARP or Proton VPN to resolve the issue. Switching your internet connection may also work.
Did you set it to read-only in properties?
no, i forgot to
Ah
Do I really have to use a VPN 😭
there's free VPNs available
My game was working normally before
you can also switch your DNS
Hey zen have you tried having someone get new nv dlls from another source? Went through some old forums where dlss swapper gave them working dlls for their game.
haven't done this yet
i gtg i cant try that rn
there was a slight mismatch between the existing dlls and the ones which verifying the integrity of the files provided
Still getting the same game integrity check failed
which DNS providers have you switched to?
8.8.8.8
try the rest
Still getting the same error
ProtonVPN time 
is there any way to download to .8331+ with intel iris xe
@somber fiber
- Click here to navigate to the [[Intel DDU Tutorial]](#tech-support message)
It's not a network error though
but the latest driver that iris xe can use is .7___ something
.8331 doesnt exist for iris xe
its only available for arc
they're compatible but not optimal
ohh ok thank you
Endfield is the only game I'm getting the error in
you can either update to the latest .8331+ drivers, or the other drivers which are now separate for your system
Do I have to uninstall and reinstall the game?
All of them
I already uninstalled, I'm gonna reinstall it again and see if that works
1.1.1.1/1.0.0.1 and 8.8.8.8/8.8.4.4?
along with 9.9.9.9/149.112.112.112?
@fleet hedge
Stuck on compiling shaders. This after a few restarts of troubleshooting being stuck on loading resources (not releasing, loading). It isn't an issue with hardware or drivers, those have already been ruled out
switch to dx11 and back to vulkan after launching the game ✅
What that did was get Compilng Shaders stuck empty, and not full
Enough to not have problems prior to today, playing daily since launch, and play more intensive games
could you share your full system specifications if possible?
Unless something broke in the past 12 hours with nothing updating, aka something that can't happen, then my specs objectively cannot be the issue. So no, it isn't relevant
Do you want help or not 
Literally though, Endfield the only game that gives me headaches just trying to get it to open to play
it's difficult to diagnose technical issues without having additional information 
Irrelevant information doesn't make progress in solving the problem
try increasing your shader cache size
Nothing could've caused this randomly today that wouldn't have already done so
Not on my end
if you're absolutely certain that the aforementioned information is entirely irrelevant, and you're certain that there's zero potential issues whatsoever from your end, you may consult the functionality tutorial in the pins for additional help, @kindred bear 👍
- Click here to navigate to [[Arknights: Endfield Functionality Tutorial]](#tech-support message)
All this has done is make it so that instead of being stuck on a full or empty bar, sometimes it partly progresses and then empties out and gets stuck
Well none of that worked, guess I just can't play Endfield anymore. Good job devs, you broke something and now I can't play. Glad I wasted money on this shit.
if you're interested in receiving in-depth technical help, we can continue assisting you further here if you're willing to provide additional information, such as your system specifications 👍
it's alright if you aren't willing to though
Irrelevant, as this was not an issue on my previous login and nothing has changed since then. No updates, no downgrades, no hardware changes, not a single change. It cannot be the problem randomly if it wasn't before.
There is no official info about upcoming dev log? I want to see if they are working on performance optimization on mobile
information regarding any upcoming devlogs generally release further along the update schedules
so you can expect an announcement for it towards the end of this version patch
Jeez
If possible I'd like to refer you to contact #contact-us if you think we ask for "irrelevant" stuffs.
For general, we community tech helpers here are asking for specs to diagnose if your system is not on the issue on the way, because the more you update, the more heavier the game can be, and the more assets, the more your system is under heavy load
I HAVE NOT UPDATED SINCE THE LAST TIME I LAUNCHED THE GAME WITHOUT ISSUE. HOW MANY TIMES DO I HAVE TO SAY "NOTHING HAS CHANGED" FOR THAT TO BE CLEAR?
Anyway frame gen on mobile become unstable big spread fps if i multitasking the game app. To fix the frame gen big spread fps, i have to close game and relogin.
and what's the last time you did this?
The game has not updated. Windows has not updated. My drivers have not updated. My hardware has not changed. It has been twenty hours. Nothing. Is. Different.
you don't understand what it means for not updating in an online game or make the system driver meet it's need no?
I have logged in almost every day since launch, and this is the first time I've had any issues with not loadi
Oh
You're just being a dick
Cool
Stop "helping" people if you're going to be rude
let's just leave it at that 👍
Just don't be rude when you're trying to "help" people, why is that so hard
It being a new day when nothing has changed should not warrant the game entirely breaking. Nothing has changed.
Then if possible, may I ask on how are you certain we are rude, please elaborate further. We just asked basic questions to step forward.
Right, because this was "just asking" and not blatantly rude. Because nobody would ever read this as condescending because you're not happy I'm annoyed at having to repeat myself.
The tone in this message isn't exactly coming off as wanting to help, either
if there's believably no fault/error on their end and there's no solution to their issue, persisting with this discussion any further will only result in disagreements and conflict @sudden sinew, @kindred bear
customer support might be able to resolve your issue though as was mentioned
I had no intent on continuing until "How are you sure I was rude" came from the person who also said I don't know anything :)
If you see like that, we apologize on our side, if possible please do have consult from customer support (#contact-us) as mentioned
You're only apologizing because your friend is telling me to shut up
please do remember this is a "player helps player" channel, we can actually start with our casual tone, please understand, and we do start collecting needed informations before we jump to conclusion, thanks for understanding

"We can actuaally start with our casual tone"
If your casual tone is "lmao you don't know anything", that is a problem and nobody reasonable would disagree with that
How about we get back to tech support
This conversation isn't going anywhere so best to drop it.
Remember people here are volunteering to help so be nice to them and also vice versa. Arguing over this stuff is not productive.
hey t404, do you know why my ip addr showing 2 ips, i know one from NetworkManager & the other i don't know where it dhcp
not here rn xD
also one is your own ip one is broadcast
not productive
yo, does anyone know about the "PlatformProcess.exe"? (don't really need help btw, just wondering what it is because i'm curious
)
it just handles the in-game browser/webview stuff, if you're asking about the crash reports it was generating upon exiting the game, that issue should've been resolved with the 1.2 version update
oh shit is this not the right moment 
tysm!
still getting crash reports? - or just curious as mentioned?
unreal engine has it iirc
ah no, not at all, never got one, just saw the program running in the background because my pc cam pointed it as "high background memory usage"
ah
yea it does require a lot of ram
idk if it's smilliar to FWindowsPlatformProcess but it processes the (background) work for the game to load
np

it not broadcast, it legit showing 2 ips diff ip... oh well, i ask Max later


like one with 255 at the end?
one with .106 & other with .64
they both showing broadcast ip as well
give me a while
ok
after the brd?
also here's an example of ip a output
agree you xD
i thought i had that shaders issue as well but mine loaded after my 2nd try :D
resource issue: hash check bug or system bug
shader: game loads under heavy proccessor condition, may load or may not load
That can happen if you have multiple things trying to configure the IP. Top suspect would be systemd-networkd.
mostly if you config or your system
i figured it my config, but im not sure which one
Try sudo systemctl stop systemd-networkd.service systemd-networkd.socket && sudo systemctl mask systemd-networkd.service systemd-networkd.socket.
You should run sudo systemctl status systemd-networkd.service to see if it is actually running in the first place though.
yea it enabled, give me a while
After that you'll probably want to do sudo systemctl restart NetworkManager.service.
I thought it was a dhcpcd thing xD
am back
That's also possible, but I usually check for systemd-networkd first.
yea
nah, it just me figuring shit out on arch
Yep Arch defaults to systemd-networkd, which is... certainly a decision.
NetworkD is entirely config-dependent
Because it's already there with SysD
To be fair though NetworkManager is also a bit of a pain in the butt.
Yeah but no it's most likely a second IP configured in NetworkManager, a KeepAliveD advertisement or an enabled dhcpcd
^


but ign0res prolly chooses what to pacstrap xD
Some archinstall tutorials send you to dhcpcd, since it's just set & forget
But for advanced stuff you need NetworkManager
yea
uhh pacstrap
So ignores probably installed both, was switching to NM, forgot about dhcpcd
Or just list running services and shit with systemctl status
i didnt forget, i just didnt know where & how, there a lot of shit tbh
well it me being a pebcak, just fafo on arch
Oh right t4 check DM
are the black dots intended?
Question, i am not a tech guy but should I still 60fps my game even if I turn on the frame generation? And what does frame generation does in my game
Looks like a shaders issue
Did you recently update your GPU drivers and the game didn't do a shader recomp after?
You can trigger a recompilation by either deleting the game shader cache in AppData, or switching to DX11 and back to Vulkan in the launcher (boot once on DX11, reach title screen, restart on Vulkan)
how to restart on vulkan? im blind to these things
Just untick the Dx11 box under the play button, inside the launcher
alright tick the dx11 and boot. then reboot with the dx11 off
Something's probably limiting your FPS
Do you have VSYNC on in the game? Or didn't raise the game's FPS cap from settings?
Im using phone
Sd 8 elite
And saw this option
I am actually surprised myself. Didn't see this when I play before
You might've found a bug 
Though it shouldn't do anything without the Nvidia hardware, maybe at most crash
I'ma boot the game on my phone in a bit have a look myself
There was nothing in the live device overrides last I checked
Alrite tyt
Yeah I don't see it, game's fully updated as well
I believe that's a bug, but I'm not staff to give concrete feedback
using dx11 the black dots are gone. but unticking the dx11 gives the same problem
What GPU do you have? And what driver version?
nvidia 3060 v572.52
i saw reddit post saying newer version of nvidia driver is getting more problematic. idk what how where.
596.21 seems fine for Endfield
just don't update to 595.xx
595 indeed had issues
But 596 is fine
small indie gpu manufacture, please understand 
alrigt then should i update to 596?
ill try reinstall first then lol
Don't forget to select advanced > clean install during driver installation
-# flashback of me having PTSD from MHWilds crashing that time 
still persists after clean re install. is there any other alternatives before doing nvidia driver update?
oh nvm just scrolled up
596 is stable for endfield
they "fix" endfield stutter issue & it stable for this game
got it, i play quite a few different games and idk what they did after the 591 drivers but all the updates since then have been horrid
hopefully they figured out whatever it is they were trying to do with 596 lol
speaking of shaders
sort of off topic
has anyone done the "opt in for beta" in the global settings
you mean the Nvidia settings?
they have a "clear cache" option now for the beta and wondering if that's worth attempting
i think MetalmanBonker opted in
usually i manually do it if needed but curious if that's actually useful
yea
think about this...when the regular releases were already quack enough and you're wanting a little bit more problem on your hands.....sure why not

it's whatever for me
people on slower cpus with less cores will likely find it useful
dynamic fg is too aggressive atm
I hope they are working on a variable mode like LS does it
it's included in the 1.2 version update for select devices 👍
Huh
Why the fuck do you need FrameGen on already high-end chips? Will they enable 120fps on mobile?
they're using the Sd 8 elite, so it is supported for their phone
but it's been reported to have really bad pacing issues at times and it just falls apart in specific situations
I tried it, it's really bad on an sd8 gen 3
like actually falls apart lol
like 50% more frames but it goes up and down so much
Frame Peacing out
on a separate note, there's been some more fixes 👍
i'll create a few placeholders so i can update the patch notes properly in the future
oh yeah I experienced that time where Nefarith's HP disappeared
lmao
yeah it's a commonly reported issue
discord only allows for 5 attached image links in a message
this should be enough to last until the end of version 1.2 hopefully
how about we just type it out
if it isn't, i'll just splice multiple of them into a single image to create more space down the line

i've also considered doing that
it'd make it much easier to attach a specific image/link next to the bugfix for every line
i kinda wish that they give us a version to copy & paste
No issues on the Elite (SD8 Gen4)
At least on my side, on the tablet
how high do you get
base 30fps?
though I'd love it if they unlocked 120 for mobile
No like no FrameGen
I was playing last night
oh I was talking about the frame gen mode
Didn't even know about the option
try it 
But will look for it when I get home tonight, didn't bring my tablet with me today 
if this happens it'd only be for apple 
yea at base 60fps I jump around 70-90fps
I might just use it then lmao
Big ass screen with HRR, game doesn't support it

So anyway I've completed the peak Linux experience
My ONT SFP runs Linux
My Router runs Linux
My PC runs Linux
I have a Linux VM on my phone

Do they announce about it fixing?
growing grass in the operator menu is crazy
there'll be optimizations and fixes for it in the future 👍
Alrite, so for now it has a issue. Ty
hey guys, I wanna ask, idk what happened, after the update my graphic setting for the game changed to high quality (it was custom before), and i can't find render scale anymore, can anyone help
what are your system specs?
if you're using a nvidia graphics card, there's a chance it switched from TAAU to DLSS
which is better
ohh
@olive steeple
- Click here to navigate to [[Graphical Settings Information]](#tech-support message)
it just its too hot for my laptop for it to go to high which is why i changed it to custom (lower graph overall)
what's your laptop model?
and graphics driver version
render scale adjusts the native resolution and DLAA/DLSS UltraQuality/Quality/Balanced/Performance/SuperPerformance adjusts the native resolution as well
DLAA is 100% and ultra quality is 77%/68%/58%/50%/33%
i5 gen 13th, rtx 5050
591, 86
update to 596.21 👍
select custom installation -> clean install
follow the nvidia control panel settings guide after clean installing that's above this link for the best configurations
- Click here to navigate to [[Graphical Settings Information]](#tech-support message)
these settings which include a few optimizations
hey guys my endfield is missing its frame gen and dlaa option , before the update it works just fine , my graphic card is on rtx 4070 and i already updated the driver to 596.21
you'll notice a slight performance increase for essentially no visual difference
@scarlet reef, you can try doing this first 
i see, will it generate more heat tho
nope
already did it , doesnt change anything
Warning (3, 1060, 158001) [78b97e30764e818186a566]
It is detected that you are running hacking tools, please close
unnecessary programs, restart the machine and try again. (1-7000)
but.... i don't have hacking tools
i just wanna build my factory 🙁
@scarlet reef, could you launch the file explorer and paste %ProgramFiles%/GRYPHLINK/games/EndField Game into the leftmost search bar for me please?
next delete these files and verify the integrity of the games files, you can launch the game and check for the DLSS/FG options afterwards
you can safely ignore it and continue playing the game 👍
have you received that message more than once?
it just goes back to the launcher and won't let me play
the anti-cheat may detect certain software on your computer and it'll cause an issue if you're trying to launch the game
are you playing on a laptop per chance?
yes, laptop.
ASUS?
acer, nitro V 15
check task manager for any running applications which may interfere with the game and close them
nvm managed to fixed it by deleting the remote boot line instead
any optimization software, overlays, etc
btw, is this work on everygame or just endfield?
it's for every game
they're driver-level optimizations
i'll help you with your in-game settings after you finish clean installing the 596.21 driver and set the nvidia control panel changes
i see, ill try, if i see another prob, ill tell
still gives error
you can navigate to 3D settings after setting it to use the advanced 3D image settings as you've done
@queen crane
make sure you disable vsync in-game
you can check here for which settings have the most impact on heat/performance
the dots still persists after newest driver update + clean re install. help
Dx11 doesn't have it from what they were testing earlier
btw i already know why there is microstutter this update
gpu disconnects every 700 ms
just sent the whole file to hypergryph
works normally on dx11.
I did everything, downgrade my driver, updated, even setting low options but didn't fixed
- Click here to navigate to [[Reliability Monitor Troubleshooting]](#tech-support message)
- Click here to navigate to [[Windows System Corruption Fixes]](#tech-support message)
the people in this channel may help you here after you finish these tutorials 👍
can confirm it's a game bug
i'll report it for you aswell
also already reported ✅
Snowshine on Vulkan?
yup
Ah
What kind of fucking bug is that??

KEKW what they did to Snowshine.
I can't replicate since Am using Optiscaler FSR.
I suppose it's another rendering bug with the rain
It’s not like I’m writing this without having tried anything. I’ve already tried everything and checked every single detail, but the problem still hasn’t been resolved. I even took the laptop apart to replace the thermal paste and thermal pads, and checked the voltage of each component, but found nothing wrong. Crucially, I didn’t have any of these issues with the previous version; they only started after updating to this version.
Go in water, get her wet
still good
On vulkan api ?
Vulkan -> d12 -> fsr 4.1
Hmm curious
but yeah you are using a forbidden tool
Optiscaler is still not allowed to be injected
but hey atleast you are not having it there
I tried this time, but the menu thing always annoyed me reason not to use it. but overall ITS SO GOOD
i'm going to fiddle around later to see what can fix it on my end
NOW WORK CALLS


also am kinda dissapointed for Fangyi rain wetness
rest charecter released till now effect can be noticed much more
but fangyi not so much

She's a leek, she absorb water 
but the tail getting wet is good enough?, 10/10 will Fangyi wet again.
nope, just barebone FSR
I think FSR and DLAA have different system. not sure how it works though.
Share your gamescope patches already 
Yeah She's gorgeous in any form. XD
it still needs QA
it's almost done
I'll be QA 
NANITE
MAX
i hate it

i have to wait for the stupid implementation
on wuwa
i wonder how bad it will be again to integrate

HBD man
Happy birthday Banga man
mine started off with fighting with my older sister
well the 2nd oldest
why? cuz i bought a pair of brand T shirts to gift my brother in law

ok enouf unlucky talks
should i keep using DLAA or usue DLSS with quality mode?
I don't even celebrate mine
I get older by a day, not a year
Hell, we get older every hour, every minute
true
never celebrated mine too
cuz nobody irl cares to throw a party or anything even a nice lunch or dinner
also this is annoying when i launch the game from launcher it just minimizes here instead of tray
like why

Anyway this isn't Depression-support
Have a nice day while i wait for nanite instructions


good luck of ur suffering
dont lose hair tho
your resolution is not high enough


What is even happening to your windows and games

NUKE IT
and go LTSC
less headaches less problems
i had to nuke my windows like 8 times
i have to register for it? 
nope
no need to register
besides
one line and you can activate it for FREE
oh nvm took me to wrong link
github one? 
I used to nuke it every 3 months just to be safe instead of waiting for it to break itself lmao
no further disclosure
IYKYK
longest span my windows worked perfectly was 3 years
ultimate challenge


Na am thinking how do I word this
mine iis like a year old now almost
you could if you disable the windows update
I have a lot of:

windows xp was the best windows
xp is alright, 7 is peak
What even is that?
Just a fully written rust based operating system

nanite time
4??????????
Also who dis chara
she from GFL2
Full form idk what that is 
Girls FrontLine 2

had the same trace yesterday, have you found a fix ?
NTSYNC
for some reason I didn't have it load automatically on boot
hey there quick question how did you make optiscaler work with TAAU, because so far I've tried it but the thing is asking for me to use DLSS or XeSS both of which aren't options to begin with
care to explain what this is ? some kind of translation compatibility thingy I read ?
is this a device issue or in game?
It's a special driver in newer kernels designed to increase compat rates with windows applications
If you can do sudo modprobe ntsync in the terminal and it doesn't return any errors, you should be able to just enable it on boot (for some distros it exists but doesn't get enabled automatically)
that is probably device issue, as for what it is im not sure gotta ask the tech experts here
nuthing here chief, how can I have a crash related to some piece of software I don't have ??
Did it error when running? Or just returned a new line?
I tried this mate and still no dlss option unfortunately
Going to try AMD super resolution
It's exactly because you don't have it loaded, it falls back to FSYNC (the old implementation)
returned nothing, just new command prompt
apparently it's from 6.14 onward and I'm on 6.19 so that's weird
oh I'm a dumbass modprobe shows loaded modules
What distro are you on?
No return means it loaded successfully, you can check lsmod | grep ntsync
or is it the other way around
And to set it on boot, you can
echo "ntsync" | sudo tee /etc/modules-load.d/ntsync.conf
lsmod returns ntsync 20480 0
That means it got loaded successfully
Do this one, so it gets enabled when the computer starts (instead of having to do modprobe manually)
modprobe loads a driver
rmmod unloads one
lsmod lists the loaded drivers
any idea as to why it did not load it automatically anymore ?
It doesn't get loaded automatically, only if your distro sets it to do so
Fsync mostly does its job as a fallback, but there are occasions like that crash when it fails
After this, you can try a system restart and see if it got loaded
If ls -l /dev/ntsync returns stuff post-restart, the autoload works
linux or windows?
windows
going to need to find my config files xD I use goverlay on linux which gives you a nice lil interface
oh I see
much appreciated
Oh yeah I have to ask were you running dx11 with optiscaler?
Because I tried running vulkan and it just crashes on startup
Not even going past the Gryphline logo
no using vulkan
I see
amd card?
ah
not compatible?
I do know the devs disabled dlss on that card
yeah unfortunately
does the boot config file edit no longer work?
Was willing to deal with TAAU if I could force sharpen it
but yeah
No unfortunately
w8 you can use TAAU as API for optiscaler?
Tried zencrox's other alternatives like deleting the dlss dll files and then verifying integrity but still doesn't work unfortunately
personally I use TAAU and then force CAS sharpening to clean up the image
but with optiscaler you should be able to force the game to show dlss
ahh so its just CAS sharpening.
should be safe. games usually don't ban optiscaler usage
Its still bannable but devs doesn't strictly care if you use like optiscaler.
as long as it doesn't effect currency and such. should be safe.
if you wanna be safe, don't use dlss spoofing, and just use CAS sharpen
Alright
For CAS sharpen I need to install ReShade first right?
Or just CAS directly
alright
`; -------------------------------------------------------
[CAS]
; -------------------------------------------------------
; Enables RCAS sharpening
Enabled=true
; Enable motion sharpness
; Set to false. Motion sharpening in upscalers often causes
; "trails" or "fizzing" on character edges in Endfield.
MotionSharpnessEnabled=false
; Sharpening will be added or removed according to motion length
; Leave at 0.0 since we disabled the feature above.
MotionSharpness=0.0
; How much a pixel should move before motion sharpness applied
MotionThreshold=0.0
; How much a pixel should move to reach maximum MotionSharpness value
MotionScaleLimit=0.0
; Enable debug highlighting for motion sharpening
MotionSharpnessDebug=false
; Enable Contrast based sharpening
; Setting this to true helps the factory machinery look
; grounded without making the hair/grass look sharp.
ContrastEnabled=true
; Contrast based sharpening value
; It helps define edges without the "Vaseline" feel.
Contrast=0.1`
I would set it up around that, and change the contras=0.1 to a higher value for more sharpening
I personally think 0.1 is just enough. but if you want more, try 0.4 to 0.6 @desert lake
alright I changed the settings in the config file
I don't need to open optiscaler menu for this to work right?
I just need to save?
should work by default if you got optiscaler installed
since it's already enabled in the config file
what was it?
Needed to reinstall optiscaler because the option I did was for dx11 not vulkan specifically
on 0.1
off
discord crashed when I tried top post the off image xD
easiest to see is eyes and lips, chins
anyway, as long as it lessen the blurry effect, Am good at it.
Thanks mate
any of ya'll know where i can find the splash art for the charecters in good quality ?
main site dont have them
.datamine
wiki should have or forums
anyway that pot3 fangyi, low key flex
https://endfield.gryphline.com/special/over-the-frontier btw if you want high quality dev created artwork and community artwork go here
Hey nanite is actually not too bad
i don't know why i was complaining
just had bad experiences with the other implementations i suppose
Is this the right channel to ask for help with technical problems? I am having an issue when launching the game: when I press “Play” the launcher window goes away for a few moments and then returns, the game doesn’t open and I’m not sure what to do
Right channel
Can you provide some more info? System specs? Operating System?
he just got banned from the server ?
... Looks like it?
weird
Though a ban would also clear messages afaik
lmfao
bro wiped out
speedrun server ban?
help why i cant rotate the camera during fangyi ult..
like where? and which device do you have?
can some1 help me i sign in to arknight/ gryphlin with googel now i have a new googel account and a new email and cant play arknights
i mean is cant rotate the camera to see her frontview...
also cant log in the old account cuz idk the password from googel
lol that's normal
cause the devs developed it that way
did you not have another account linked to the old one ?
like another email
to get back into the google account
When I start the game I see this error message. If anyone could provide aid I'd be extremely grateful.
when I click it, it goes away then pops back up a second later
nope
only googel
how about cellphone number or anything else ?








