#tech-support
1 messages · Page 45 of 1
That's a beefy gpu
rx 7800 xt 16gb
You mean editing the ini file?
will upgrade to 9070 xt soon
eh I actually don't like DLSS compared to the native TAAU, DLSS causes me to stutter here and there while TAAU keeps a constant 120
fuck nvdia
What's your gpu?
I have a 3080Ti 12GB
Well i bought it for cheap 640 euros
instead of 890
Try forcing the game to use preset K (dlss overide)
4060ti is not enough for 4k sadly
That's a nice deal, in my country when i buy my gpu 7900xtx cost 1000$+
indeed it was an outlet model one used for shows
very good card regardless
I wish the store in my place do that, they never open the box to show gpus here lol
Well it's a 1440p not a 4k gpu?
*Can still run Endfield 4k max 120fps (dlss preset M performance ) tho
ah yeah makes sense this one was used for CES or something like that
, nice
you should join the red team
we'll welcome you
🗿
i am not biased for any gpu vendor
My experience with 6700xt is not a smooth ride lol. Both amd/Nvidia make good gpus
I would argue it depends on the manu
yeah definitely but in general
My 6700xt ran extremely hot 
must have been unlucky 🥲
Had to undervolt it and even then it's 90c hotspot (new paste and properly applied)
Yea, but still it's great at the time. Went from 2060 6gb to it is a life changer
But it died after 1 year of heavy gaming
under heavy load my 7900 xtx gets 180 fps in arc raiders and maintains about 76 degrees on temp
but yeah not every gpu is meant to last
i did have a rx 6800 which was defective
someone complaining awhile ago
his CPU temp reaches 85c ryzen 7 5800x
default settings CPU
told him to undervolt but never listen
man I can remember every card i had since 1997
Yea, but some gpus are mode to last. Somehow my 2060 is still going strong after all this time
Aio? Or air?
AIO 240mm
I think there might be something wrong with airflow or bios
my ryzen 7 5700x also getting that temp 85-94c with 240mm AIO before
in default settings
even with my 360mm right now in stock CPU settings reaches 85c lol
how weird
bad silicon chip
How? My dad has a 5700x on a 4 heatpipes 15$ single tower. It's only run at 85-90c default and 100c OC r23. He's using the 6 heatpipes deepcool dual tower now (the temp go down 10-20c)
Cinebench R23 or Endfield?
Cinebech will bottleneck the CPU lol reaching 99c
Without oc 💀 ?
stock settings lol with my last 240mm AIO
i guess its a Faulty AIO
Did you set Aio pump to 100%?
yup
i think that cpu is just trying to commit suicide
Does it make any sound?
its always 100%
Damn, the cpu is trying to go to pc heaven
ikr
you don't have warranty right ?
but now after switching to 360mm AIO plus undervolt it now sits 49-53 no matter what game or settings you play with
Lol that's wierd
i have 2 type of Undervolt
1 with performance mode and 1 with temp wise
I checked and it's already Preset K, still performs worse with DLSS Quality and DLAA compared to TAAU. Even tried DLSS Swapper from 310.4 to 310.5.3 and it's the same
temp wise by limiting to 4.0hz
I still don't know why it heat up that much with 240 aio
the other one with max hz and 60-70c temp in games
This is the first time i see this
not enough surface area on the IHS to transfer the heat
my AIO was like 5 years old
it was from my old pc XD
AHHH makes sense
my 5900X runs around 65-68C, but I have a custom loop with dual 360mm + 280mm, one of the 360mm is 60mm thick too
The liquid inside must have evaporated lol
yeah lol. btw thanks for yesterday
no more crashing now
also copied your MSI afterburner settings
definitely a nice setup
the cause was the GPU undervolting
Nice that's a solid 5-10% performance boost
demn
Now it should beat 3070 and on par with stock 3070ti
yo my friend yesterday got his hand at a second hand 4070Ti super for just $300
I never dream to have custom loop lol, it cost as much as my pc for everything
a stupid student is selling it wants to buy a macbook to play valorant
stupid reasoning
thanks, I love PC hardware stuff so I put a lot of extra effort into the build itself. Would love to upgrade from my 5900X+3080Ti custom loop but I don't justify upgrades unless I see a 2x jump so maybe next gen lol
Wtf? Mac is really bad for game???
ikr
whoa that's an insane deal
300$ damn
i dont think i will have to upgrade for another 5 years with a 7900 xtx and 9960x cpu
why would someone want a mac for gaming ?
ofc. i wont even build a pc right now
the prices are ridiculous
i will upgrade to 9070 xt soon
i have no idea
I can even sell my 4060ti 16gb for more than what i paid before lol
can you get it for a good price ?
yeah, that's honestly so good for another 2 gens. If ngreedia actually put 20GB of vram on the 3080ti like they planned instead of going with 12gb, I could stretch it out longer
well i guess 6000 series will be much more focused on AI perfomance rather than raw power
Same, i'm sticking with 1440 dldsr and preset M performance. It will last 5 more years especially with 16gb
but honestly raw power cannot sustain future graphic cards
Raw power computing already hit its wall
I heard Jensen want to make the gpu with only ai power
much better actually. no more Heater in the room
how about
open ai
fails soon
along with oracle
then nvidia crashes about 20 percent
i dont think that will gonna happen
they are burning through 220 billion
all they have left is 40
so either nvidia invests
or they die trying
Doubt it, Microsoft would save them
of course microslop would save them
we are in AI era now
My game started lagging? Just today ...
so they wont let that happen
China will save pc gamers 🗿
hello which platform ?
Recently they just released ram for 1/4-1/3 the price of others
Temp, Memory? observe it on Rivatuner first
what are your specs ?
Idk ryzen 5
The number?
I forgor
have a look in system under windows
go start>dxdiag
oh okay well let us know later
Laptop?
Yeah that's the brand
so its not lag but performance?
2050/3050/4050?
3050
just wait until he can turn on the system again
Ye
so we can see the full picture
That'd be ideal
But yeah it was smooth all week. I think there's a performance mode
That turns off when unplugged
Nyeeh
Thanks 🫡
have you played the new wuwa patch
i swear it tears my heart apart
I just got home, i'm about to play it
put some water on the side to drink
It's going to be pretty devastating and sad, right?
i said nothing go and fullfill your duty
witness with your own eyes
still no hotfiix?
i don't think hotfixes exist for this game 😅
slowfix perhaps
My Endfiled is running smoothly again. it might have been that deactivated performance mode back then.
yay
performance mode ?
ah you mean you are on a laptop
@storm cairn hi, just wanna let you guys know. i tried to uninstall the ACE but it still didn't work, so i search my error log on google and tried everything that they suggesting. it works after I deleted endfield folder at this location:
%userprofile%\AppData\LocalLow\Gryphline
So i think the cause is corrupted cache or something, at least that's what gemini told me 😅
Fake broken road. (Yeah... I'm out of Sanity.)
yeah the laptop needs to be plugged to do performance mode which makes the games run smooth
yeah that's pretty normal laptops on battery have like 70 percent reduced performance
ZeroSanityGaming Squad
anyone know how to find this 1 combat tower. i check in all my sub pac base none tower and in all map its say 0/10
240fps using smooth motion lol
This occur since yesterday, not occur before that, so it's time to retire?
||USE A RAM INJECTOR|| TOS TOS TOS
hello on pc/mobile other ?
when youre trying to place a tower it counts that ghost of a tower against the limit already. if the limit is 10 you can place 10 and trying to place another one will show 11/10 over the limit - so in placement mode you will never see 0/10
for some reason my game is noy opening. i played yesterday too and now its not opening. im using iphone 11. it doesnt seem like there is an update either. any idea how to fix it?
Am I good running the game at 70-78temps for hours? They say its still a safe temp. But I wonder if its still safe if it runs at that for hours.
it goes 60-65 while on menu interfaces. like operational manual, etc.
and 70-78 while on actual game.
Isn't that normal temp for gaming
fully restart the iphone the scheduler gets stuck on older phones like this
thanks alot! wasted so much time just to find this 1/10 hahaha
Then I blame idiotic windows shenanigans and shall recommend you either reinstall windows or switch to linux

hmmm alright, imma give that a try
Debloating windows do wonder for this game
LTSC ftw
you know it's ridiculous how much telemetry there is on the normal windows
that fixed the issue, ty
you're welcome have a nice day ❤️
I've looked into LTSC, but it seems that they use different license and I need to back up everything to install that
90+ is dangerous imo but people will tell you to be careful going over 80. silicon is vodoo and you cant really exactly determine when it goes into the danger zone
You can "trick it" in regedit to "upgrade"
It's normal for 3000 series not normal for 40/50
Token exchange gave me the wrong currency. Is there any way to fix this?
Awesome. I guess I won't need to undervolt it.
Though I don't really recommend it, a clean install is way better
nope no taking backsies unfortunately
I kinda want to buy separate ssd to install that linux gaming distro
Bazzite?
Disabling a bunch of useless services (wifi, Bluetooth, location, fax and dozens more) really make window run faster
Devs need to fix this to make it clear what you're exchanging for
i understand what you mean be sure to suggest so if you want
i swear i am still crying this wuwa update broke me
what exchange are we talking about here?
i think some people would disagree on wifi or bluetooth being useless but ymmv
Quota exchange
Soon... i will know how you feel
(only 100gb left)
Well for pc just plug the ethernet cable in, it's way better
Yeah
where do you have a choice on what to exchange there? wasnt it all linear or am i misremembering
ah yeah it is 132 gb now but they overhauled the engine and updates to much better textures
Even cat5 is a lot better than wifi 6e in term of stability
i agree. but i have also lived in a places where that was physically impossible
Wired > Wireless
Quality wise
It's pretty neat, though you can't change between the deck-like "gaming" edition and desktop edition without a reinstall
Yea, i watched the stream they really increased the quality of the game by a lot
True
You have to pick if you want a Deck-like experience or just a desktop mode on install
Steam Big Picture is still in there, though you won't be able to autoboot into it
Oh just the ui
And btw did you win aemeath 50/50
i will not pull her for good reason
I'll prio convenience, I wont see the UI when I'm gaming anyway
I see
you'll understand once you get far into the story

prepare to be fuming and crying at the same time
hey guess what
nox was asking
for another employee
you know what i said
||no way i am getting underpaid with your scummy tactics||
Why does this happen to me
Tried verifying game integrity with the launcher ?
How do I do it
hamburger menu on the start button
Lemme try
Seems like the game causes problems everytime there is a patch update
Only seems to happen on my laptop, my iPhone is fine
My laptop is Ryzen 7 32GB ram with 3k graphics btw, bought a few months ago
works on my machine™
containers for all!
Still showing game integrity fail
the TM makes it perfect
Anyone else have the audio bug where the game resets your audio volume on boot? When I go to settings I see the correct volume but adjusting the slider will change the audio to the new value, but the previous one is clearly just max. Is this just a bug?
what does windows event viewer say because your device ran into a problem right ?
no no i don't mean that go to event viewer in windows
Ok what do i look for
application errors, or system errors
system errors first since i saw you have the clock watchdog timeout
yeah they showing
can you take the most recent error
yeah fully open the log and show it here
sure sure
Do you need the other tab details also
should be enough with this
Who's nox btw?
What do i do now
i dont think thatll help determine the cause. you can easily provoke that error by using alt+f4 to exit the game. my event log is full of them and i have not had a single "actual" crash
the watchdog and error here are closely related
just give me a second
oh i completely missed the stop code in the photo. my bad
your drivers seems either unstable or are corrupted could also be chipset drivers best to fully update first
@half schooner found solution?
What do i do
I go to windows update and asus armoury crate update?
update your drivers for your gpu via amd's website aswell as chipset drivers
best to have clean files
amd website...
I have never done that before, it's my first gaming laptop
Today, Endfield isn't using high cpu usage like before but signalrgb bug is still there lol
I just go to the amd website and download the driver?
OK i downloaded, but windows there is some Windows update going on so I can't install the driver yet
I will try it after i restart windows
do you have amd adrenaline software? you can update your graphic driver from there
I do not
I have to download and install?
yea, you can use it to update amd drivers and chipset from there
I google amd adrenalin and it leads me to the site xomori linked
just fresh download it
since i suspect your current driver is not functioning
Ok gimme afew minutes for windows update restart first
fun fact one of my rgb modules killed my ram once

yeah usually does not happen
Anyone know how to resolve "error code: 2" ?
show the picture perhaps ?
Btw is 40c normal for ram? Can't be too careful these days 
totally fine
Restarted and installing AMD
good good let it update everything at once
should take another 5 mins
after restart
let me search for a workaround
I really hope this works cuz Endfield has been bugging me since release, freezing at least once a day
Should have asked here earlier
Ok AMD installed
What next? Restart endfield?
yeah try to run it again under vulkann
Fun fact a bios update burnt out the DP circuitry in one of my monitors
Still says this...
Relogging, Teleporting or walking to other map doesn't seem to fix this lmao
Anyone experiencing [ Depot Node II ] quest bug? I got the quest itself to talk to Bonnie... But when I reached the NPC there's no prompt to Talk...
hmm alright let me search for the hgdownload thing then
mostly corrupted file
What is corrupted
some of the game files might be broken or not how it supposed to be
Integrity check is checking for modified files
Now it says this
that just your network no
I am talking to you onlline tho
#tech-support message try this first
#tech-support message same for you
Do you have a stable internet connection or do you have very variable ping? It's possible the game files didn't download properly due to an unstable internet connection, and you're also getting that error, this is all guessing though
or just firewall thingy, or your isp blocking endfield
Is that a hidden folder
Easiest way to check is with changing dns, vpn, or just use warp
Where exactly is EndField_Data ?
You're Priestess, how the hell you can't deal with this
nope not a hidden folder you can find it in the drive you installed the game
Maybe if I was a mechanic, sure
or technician
can you be a little bit more human
instead of blabbering help them
Found it
you can find where you installed the game via the launcher and then follow the picture
So i delete HGDownload and restart?
Now while I have no issues, I also checked and I actually do not have that folder, are we sure it always exists?
it will delete itself when not needed anymore
It's their lore tho
That clarifies everything. Thanks
exactly then the game will get a fresh batch
Ok here goes
Not found, I checked all possible files in there and nothing. I never even get to play it, its been like that for the past 2 days now
Sounds like you might have to fully reinstall
did that 4 seperate times
You havent downloaded it do you?
Go to gryphlink launcher and click settings, go to installation path, click on it and copy the path
Then paste
I did that just now
I dont think any of the installs actually went through. The Endfield game folder should be full of files:
I did, but it always goes to "Downlaod Error code: 2" after reaching installation 100%
Yeah
Unsure if this will help or if you've seen it or not but found this thread on the reddit: https://www.reddit.com/r/ArknightsEndfield/comments/1qjxy5q/error_code_2_solved/
yeah i think trying to delete the launcher_tmp folder and trying to redownload again could help. Stupid question, but you do have enough space on the drive?
because the first cause coming to my head is the download not completing, the launcher subsequently failing to decompress the files and not being able to recover for unknown reasons
yep, I used the D file instead of C cause C is full for Genshin
Ill try deleting the launcher_tmp
I just turned on my pc and opened gryphlink, what do I do next?
try to launch it now
Just launch game?
try the reddit fix first, is your c drive almost full?
yeah thats another possible issue - the download completes but there is not enough temp space to decompress. How much space is left on C:?
I tried downloading at C file first, file is full
when you redownloaded you did a clean install onto D or moved files?
that might be the problem
clean install
since most download goes through c drive
It ~should~ go into the launcher_tmp but the decompression likely happens in a Temp folder on C:
I'd def try following the reddit steps I linked before deleting or reinstalling anything imo, the 3 people (including OP) seemed to suggest it resolved that error for them
good to know it works have fun ❤️
also worth noting that depending how full your C drive is you may still encounter issues as a lot of registry or program configs are stored in C, which could be creating problems; but that is only if you had like 500MB free I think that'd truly be an issue but I'm just guessing
guys, im running a Ryzen 7 5700X and RX 580 GPU, according to the requirements this should be enough to run the game smoothly and i get 90 fps but it Stutters so much. randomly goes to 2 fps whenever i start moving around.
Yeah thats why I was asking how much space was left on C:
Hi, I have a problem. My mouse pointer doesn't appear when I use the inventory, map, pause menu, etc.
Do you have a controller connected?
Sounds probably like graphics settings issues, that GPU is min. spec
i have everything on the lowest settings
No, I don't have any controllers connected.
driver issue prob
can you show how much it uses on the task manager ?
and im using the DirectX11
ok wait imma lauch the game
Hmm, that was my first thought. I had a controller with stick drift for a while and it kept hiding the mouse in dual-control games
I run overclock'd mx350 and it goes pretty well
Does holding 'alt' do anything?
controller have a prompt to switch
do you have other software running in the background?
Even though I press the Alt key, my mouse pointer still doesn't appear.
also best to use vulkan with that gpu
how do i do that
I assume you've already tried force restarting (alt f4 since I guess you can't quit normally w/o cursor)
in the launcher you have an option to enable or disable dx 11 just disable dx 11
yeah i have that enabled
Dx11
Game run with Vulkan by default
Ohhh
Just uncheck and you'll use vulkan
k
I'm in windowed mode; I can simply move my mouse away from the game to the PC desktop. I tried uninstalling and reinstalling the game, but nothing changed.
which part of task manager should i show? performance tab or the game app itself
performance tab
ok wait, it transfering my game files from 1 drive to anoter
Do you have the cursor on the main menu? If so, have you tried playing in a fullscreen mode and see if that affects anything?
why transfer ?
ah okay then
I already tried switching to full screen, but the problem persists. This issue hadn't occurred until today; I was playing normally yesterday.
What GPU do you have? Also, when in-game try using Alt+Enter and see if that does anything
@broken swift i'm dead i think i will not touch wuwa for 3 weeks
My GPU is an RTX 3050. I already tried alt+enter, but the problem persists.
noticed anything in particular when it first happened ?
I simply opened the game as usual, and when it started loading, specifically during the "loading shader" part, my mouse pointer disappeared.
can you list what you have tried so far to fix it ?
I have no idea what could have happened; even after maintenance, the problem hadn't occurred.
do you have other software or overlay running in the background?
My only other thought would be reinstall drivers
Discord is the only thing I have, but I've always had Discord open.
try disabling the overlay for discord first, also check if nvidia overlay is active
i would say verify your games files first and try launching the exe as a secondary option
Adjusting in-game graphics settings, changing resolution and full screen/windowed mode, accessing my PC's mouse settings, uninstalling and reinstalling the game
meanwhile check if your graphic driver is updated as well
I already did that, but the problem persists.
I already did that, I already updated the drivers and the problem persists
you don't have any other games that have this issue right ?
hello, id like to know is there a way to remove tags that are created outside the map area?
#help go there people will probably know
The problem doesn't occur with other games, such as Fortnite, Minecraft, Stellaris, and Heartopia.
hmm alright have you tried disabling fullscreen optimization under the game exe ?
How can I do that?
while the game is running btw
i see you are running out of memory
yes that is most likely causing your freezing
hm, i just moved my game to a better drive and It stopped stuttering
wierd
No way it was that easy of a solution
i would still limit your backround apps while running the game
here the full image if you confused, in your game folder find Endfield.exe
I wanted to try something, I opened the game in Direct 11 and my pointer appears
i choose dx11 version and started game but now i cant use vulkan anymore
Let me do the .exe
repair the game first your vulkan must have broke while switching
alr
Perfect, my pointer is showing up now, thank you very much.
you're welcome have a nice day ❤️
it didnt work
♥️♥️♥️
can you tell me your full specs ?
is that the 6 gb version of the gpu or 3gb ?
3 gb
alright then have you tried disabling dx 11 in the checkbox in the launcher ?
let me see if i can find a workaround
it fixed itself ?
yea i guess
alright then well have fun then
i'll be off now
i'm sure somebody else will help out if needed
.paypal
hey everyone. any updates on fixing the 90% CPU usage problem?
.nonews
Besides limiting the CPU power (game still runs fine) to "fix" temperature issues, no news
What cpu?
But it's a bit better than last week, i'm at ~45-55% while last week it was ~50-60%
I'm on a 9700x and I average around 45% as well
I was doing so well the past day or so then I start crashing again 😭
intel core i5-11400 2.60 GHz
game was working just great at max settings for a couple weeks
when i load the game the cpu usage is 27 - 35%. after some time usually an hour the usage goes up to 90% and stays there no matter what. same location etc
even on menu
restart game and launcher
thats the only way to fix 😭
Well it's not fast enough for Endfield
My 14600k which is 3 times faster uses avg 50% so...
No i mean performance wise
Both at max clock
The first 5 minutes only use 20-30% and has a bit stutters. The game then run very smooth after that 5 minutes and stayed at avg 50%. (Stayed that way even after 4 hours)
Hello, any news on the Linux crashing issues?
i'm having crashes too and from what I can see, using ntsync has helped a good amount of people
Isn't ntsync always on already?
well you need to enable the module
but you can check if it's being used while playing the game by running lsof /dev/ntsync with the game open
Can someone helo with the mouse cursor goung missing. Holding alt doesnt work
Apparently it's not running for me. I'll look into it
your task manager show 50% right?
you can enable it with sudo modprobe ntsync although that doesn't persist between reboots
Msi afterburner
for more info on it though you can go to dwproton's git issues page, there's an open issue talking about the crash and goes into more detail on how to do it
That gives me a fatal error, module isn't even found. Looks like I got some work to do
what kernel version are you on?
i'm not sure if msi afterburner takes e-core into count or not
6.8.0-71-generic
oof yeah that's it, you need >=6.14
Well it's the same for task manager
this guy has 13600k and task manager shows 100% even his e-cores dont reach max
just look at hwinfo for peeking e cores
But those 8 e cores can single handedly beat my old 12400 tho
yo guys, did the server went down or smth, i cacnt log in for some reason
Can someone helo with the mouse cursor goung missing. Holding alt doesnt work
hmmm, ye probably my wifi issue. was playing and got logged out. then its blank like this
It's using almost every cores for me
And btw the speed showing in task manager is wrong
use hwinfo 

There are 3-4 threads that is chilling at 0% lol
Does it better than hw monitor? i have never used it before
yes
did your mouse cursor disappear mid way through the game?
hwinfo is better but there are other software
damn 115w
never used the cpuid monitor, but it looks more sparse with what you've shown 
When i logged in it was gone. It still functions but i cant see if
cpuid is enough tbh
It's 125-130w last week lol
Yea just tried hwinfo, it's way more detailed than cpuid
But hw monitor has enough information for me
try restarting the game if you haven't, also let me know if you have other software or overlay running
i did restart didnt work and i have nothing running besides ak.e
try switching to dx11. if it works, switch back to vulkan
we recently have this issue
whats even is missing the cursor could be🥀
everyday the game spit out a new issue🥀🥀🥀🥀
everything is an issue at this point
thats a scam only core 1 and 2 can boost up to 4.4 4.5🥀
i took the bait L me
hey does it just disappear but the cursor is still actually there or its totally not there?
It's the scam for every non K cpus. My 12400 couldn't even do 2 cores 4.4, max 1 and it's in rare scenario. My old 9100 (8 years ago) was the same too
the former
do tla file integrity check yet?
dont know how
K cpus on the other hand... 5.3ghz pcores and 4.0ghz ecores (just like advertised) lock even at 95c 100% in cinebench 🗿
.
really want to have 14600k, but its price also got hike 💔
embrace the Haswell generation🔥🔥🔥
why cant i find nvidia dlss in image enhancement? (the only option is taau)
intel cpu... always causes overheating issues
ngl ingame dlss only help u lower gpu usage to 20%
I got lucky and bought it for 215$ with voucher (og price 260$), after that the price go up to 280$
thats all
DLSS Option Gone
Note: Hypergryph has intentionally removed DLSS for select graphics cards to mitigate possibly related bugs. No news on an official return.
- Navigate to
EndField Game\Endfield_Data\boot.config - Open
boot.configin a text editor, delete the following line:remoteBoot=https://game-config.gryphline.com/api/remote_config/1003/prod-engine/default/default/engine_config - Save the file AND right-click > properties > check mark "read-only" > apply
it maybe felt slightly more hiccup
Only in the faulty batch tho.
The new batch doesn't have that issue
just noticed that msi afb has keybind for osd toggle
what
yeah we have that
"new" 
did the integrity check and still no cursor
do you have nvidia overlay on?
yes
is the discord overlay enabled as well?
try turn it off it might be the cause
technically it rivatuner app, but yes msi afb always have key bind
every gaming pc should have msi afb installed 
somehow, i don't believe that for intel...
I'm the same as you but after buying it (the new batch from 2025) I believed it
it has gotten better so i leave it at that for now
Assrock and A sus mobo mainly
oh yea, amd recently having that issue
@golden zenith @storm cairn both overlay turned off and it still wont show up
did you try changing to dx11 for a while?
yes and no luck
didn't get a confirmation
any1 having a problem game stuck at 30-38 fps?
i even tried 480p lmao and it didn't go up
it was fine yesterday before morning 30mb update
1080/720, low/high everything the same
Disable the igpu and only use dgpu
i havn't re install driver tho
do you have a fps limit enabled anywhere
don't have igpu
120 on the setting
send me your spec here, in the meantime while i process, restart your pc
anywhere outside the game 
oh mb
i forgor adrenaline


here
alr ty
ima continue rerolling


what is your other GPU other then the integrated graphics
nvidia geforce rtx 4050
can't really think of the root of the issue, so for now i give a bit of basic troubleshooting you can do.
- Check for any update. Your go to will be Nvidia app, ASUS Driver hub and Windows.
- Check if any other games is affected by this issue. If it only Endfield, Need to dig deeper for the issue.
Help me on how to unlock tht foggy place
Alright thanks for helping
have you tried switching from fullscreen to borderless/windowed or the other way around? also if you have mouse trails turned on with windows, try turning that off, those are both apparently issues that can happen sometimes for the mouse not showing/working 0.o dont know if it will fix but wouldnt hurt to try atleast
good call, forgot that can affect as well
^
js walk up there. by the road
ur at work unc twin
i called him an uncle twin and he just said yup😭
guys is using another app to bypass the ch play safe like i dont want to get ban but i cant play since ch play dont allow me to install
I just came to check in and see this message 
stuff like qooapp would be fine
Thank you for clarifying that. I did a kernel update, ntsync runs out of the box and all my problems appear to be solved as well as some FPS improvements
im using like shizuku and apkz to bypass the you need to download on ch play smth is that safe
I really don't care how I'm called, as long as it's not defamatory
then someone gonna throw in the "Can I call u mine" joke

nooooo, who hurt u 
not sure ive never reach that far. but should be fine the only one complaint about root is banking apps
@storm cairn i thought it blocked by some fence?
If your bypass the google play store know we are not supposed to help you here
what get blocked btw. kinda confusing here
i think you need to progress through the story a bit more, you can go to #help , i cant really help you there
Hope you are well
Please tell me how long it takes for technical support to respond via email?
Usual response 7 days
a week or so
ok tysm
what
oh the
the uh fog
Plenty o' people
? Just chillin', at work
Alright then take care 
What the
that gate thats on the road going up the hill should open after doing a certain story quest or something, you reminded me about it and i walked over and its open now 0.o
just google the game8 guide for it
Or get an assistant like this
is that one of the Razer ai companions 
It's the tobbie bobbie you can connect them to your wifi
They search info for you
damn how big is it
iPhone 16e iOS 26.2
Using EasySMX x05 controller
Weird glitch when I press the Y button.
25 cm tall
You must be using rapid fire
one left in stock on amazon for 52 usd 
Is it the same one though ?
"Zivko the Robot is an intelligent Hexiped robot. This STEM robot is a great introduction to Artificial Intelligence (AI) technology. Zivko has two function modes: Follow or Explore. In ""Follow"" mode, Zivko follows whoever approaches it and acts like an obedient pet.In ""Explore"" mode, Zivko c...
is there like an enhanced model
That's the v1
And yeah there is the v2
I can't find it bro 
Ah damn
No I don’t think so. 🤔
What do I do if I just consumed all my extra character dupe tokens on the endpoint quota exchange but didn’t receive any currency?
Ah weird since i have an easy smx 20 i was thinking that
Best to report to customer service #contact-us
Yeah no idea why it’s happening very annoying tho
Try resetting your mode switch on the back perhaps
Could be a bug. Did you try updating the firmware (or reset everything)?
the endpoint quota only exchangable with duped 6* operators
I swear i cannot stand this username 😂
Any idea what might lead to my screen being stuck on Compiling Shaders? Playing on PC with an 6700xt and ryzen 5 5600 processors, I updated my drivers and tried clearing my cache in Adrenalin
Screenshot ?
@proven sundial is it worth it to store Endfield in sata 3 ssd? My nvme is almost full (130gb wuwa 💀 )
It should be alright
you shouldn't notice much of a difference
Ok thanks guys, now i can install re4r to replay it after finishing wuwa
wuwa 3.1 runs even worse than 3.0 
Wuwa 3.1 actually runs better for me 😅
3.0 part 2 was running much better, but now we're back to square 1
Can you perhaps switch to dx11 once
It's better for me tho. Especially on mobile, but my phone battery went up to 47c (still worth it)
It is on dx11
Ah you ran on vulkan before ?
Idk just the in-game launcher and from what I remember this has always been checked
Switch dx 11 off
And try again
Vulkan is better for your amd system
Still stuck on shaders being compiled. I'll try resetting the shader cache in adrenalin once again with dx11 turned off
If you do so better to restart the whole system
Because temp files tend to float around
Do the NA/EU Server have problems at the moment? Yesterday it was Cloudflare but everything is running normal again but Endfield is still reaching 999ms from time to time
It's more of a routing issue
DE? Telekom?
I did reboot my pc, now instead of compiling shaders it's stuck on loading resources
Ah one step further
Almost there
Let me think
did you check game integrity?
Yeah I verified it multiple times now
Show me the screenshot please
i cant see the curser ingame since yesterday
I meant from the resources 😅
what the hell bro why there is no option to turn off motion blur bs , i got motion sick after play like 30 minutes 
dev are you crazy or what
This screen? Or what do you mean?
Try this in order first
- Check for Game integrity
- Try switching to windowed/fullscreeen/borderless
- Switch Rendering to DX11 or Vulkan
I see well you are going to have to do the old trick right here
Alright I'll give it a go
Sorry if it's a headache for ya
I'm booting the game back up now after deleting the folder
why the heck endfield keeps showing this when i quit the game
If it does not work right away restart the pc
Give me that log 
what log
i also have that issue, but i not having in-game issue so i ignore it
That's the WebView process, another buggy mess in most gacha games on PC
keep getting it since release day
AKEF uses it for the microtransactions purchase browser, news screen, and banner rates screen
Along with the popup when you start the game with "welcome email address"
Ah yeah the web engine
Yeah it's still stuck on loading resources
that error usually comes with this lol
it didnt worked, any of this
Weird how about we try game exe as admin and launcher
Yes
@golden zenith before the shader compiling i see for short time the curser, after that anymore
ye it occurs everyday
I swapped back to dx11 and now I'm back at the shaders are being compiled phase
Well i honestly don't know what else could help
I think I'll try a clean reinstall but yeah it's looking pretty doomed
for me this is work. after you delete the folder you do the Game integrity and then try open the game no need to restart
there could be multiple things that cause this issue, for now do some basic troubleshoot for your system
- disable any 3rd party software or overlay you running
- check for any drivers update. (if you not sure, put the specs here)
- check if other games got affected. if it only Endfield. Might need to dig a bit deeper
Well atleast it helps you out have a nice day ❤️
what was the last thing before you do before this happen?
already tried yesterday, even reinstallation, the problem ist the patch from yesterday
Like PC-wise? Or game-wise? Or wdym? I played Endfield yesterday and it was fine, I played some Civilization 5 yesterday but I've played Civ 5 like, multiple times and this launch problem only started this morning
I tried updating my drivers, verifying game files, deleting the HGDownload folder, switching back and forth from Vulkan and DX11, resetting shader cache in AMD Adrenalin, running Endfield.exe as administrator and the Launcher as admin
Did they release any notes ?
i think they did, let me double check
@lunar sequoia hey sorry for the ping but any idea why mango and btop would display 2 different vram usage?
how much vram do you actually have? mangohud might be adding the gtt usage to the vram amount
4Gb vram
they only update the patch note
yeah, then mangohud added GTT to vram amount
whats gtt tho? first time i heard about that
That's everything ??
yea

apparrently they broke the mouse cursor with this update
This is getting worse by the day
basically where you put vram in system ram, it’s not inherently bad but if you’re using a lot of it then it is possible you’re losing some perf
Hi, I've been experiencing a BSOD (memory management 0x1A) since yesterday.
After checking the minidump generated by the OS, I confirmed that the crash was caused by the ACE (Anti-Cheat Expert) software.
Does anyone else have this problem?
I already updated BIOS to the latest, memtest+ for RAM.
OS: Windows 11 24H2
for now, reinstall the graphics driver. if issue still persist, you might to use DDU. if that doesn't work, like me know
Thanks mate, I think before that I'm doing a clean reinstall now the way I installed it before through the website/launcher, if that doesn't work I'll try google play games or epic games and then I'll reinstall the graphics drivers if it still doesn't work
When crafting legendary equipment, 80k credits were used instead of 8k. Give me my credits back. I was charged over 300k credits for 4 items.
do you mind telling whats 3rd party software you have and do you have any anti-cheat running in the background?
Is there a function to like...
Put my team in a hold position stance?
The flame trap roasted them very nicely here.
😄
No but they should not take damage
They do take damage.
Tried.
Laser and steam is fine.
Flame is not, took damage.
They never took damage for me on that one they used to phase through
They devs must have broken it
Right there good sir
Thank you sir/ma'am
You're welcome have a nice day 😆
there must be something common with the mouse issues
My other talk with the first guy
Solved it
When the mouse dissappeared
Need to scroll back up far
i know, he swap rendering device and it works
do u have any antiviruses other than defender?
vanguard?
no. only defender
I also tried disabling the memory integrity (core isolation). It is still crashing.
Do not disable memory integrity unless you know what you are doing
anyone having this problem? when i open menus i get 60fps but when i close them and get back into the game it drops to below 20. i wasnt having this problem about 3 hours ago but i closed it for a bit and now this happens
those kernel anti cheats would want that to be turned on
and it says gpu at overload even on low settings for some reason
yeah this will happens when ur vram/ram got maxed out
pls check if they are
i am still keeping an eye on this
it says its maxed even on very low settings its a recent issue
how much ram do you have?
ill be more familiar with the event viewer, does it said anything in there?
OK, I see.
I know what I'm doing.
Just because I migrated my VMs from Hyper-V to VMware platform yesterday. I want to turn off Hyper-V completely to let VMware work without overhead.
So, memory integrity is forced to be disabled.
And after that, the crash happens.
16gb ram 4gb vram it was working fine just about 3 hours ago when i closed the game
the ingame vram/load indicator is bullshit dont believe it, monitor your pc yourself
this is how it shows
open task manager and look there
lol if it works pls comeback to give us a confirmation
mine looks like this and its not even CLOSE to using everything
idk if there some sort of overusage of ram rn cuz its using up 99%??
you have anything else open?
its always been that way when i play a high usage game but this type of issues never happened
alr try this
16gb of ram is almost like baseline to run the game
try turn off ur background apps
yeah but ive been running it on 60fps on high settings for more than a week now i started playing on 26
ive run it on high even with operagx the ram guzzler open and it wasnt an issue
are you fullscreen?
no i use borderless
can i send a vid to show what exactly happens
here use this
ok lemme try this
u js maxed out ur ram and it start to panic
@proven sundial @golden zenith magic of reinstalling just worked, no idea what the problem was but clean uninstall into normal install seemed to have fixed the issue
pls ping us if u dont know how to use it tho
alright
Hmm then that makes me think windows had no more control over reading and writing happened to me on wuwa once
u gave ur kernel to some random ass people on the otherside of the globe
🥀
Huh ?
After that, at first, I think it is my fault for disabling the memory integrity.
I turn it back on to see if it is working. But it is still crashing.
So, I come here to ask if it is caused by a recent game update (patch).
wa i though u said windows doesnt have control over whats going on
no i dont think so?, the dev logs doesnt said anything other than some quest bugs
I have checked the event viewer. Only see the error reporting with minidump.
I haven't see any errors about the game itself.
@storm cairn ok so i did that once and ran it but the problem still persists, and i still have about 8.5gb ram free with the game open
🥀 sorry im not good enough to debug these kind of logs
What does the bluescreen say anyway
0x1A memory management
whats ur vram usage when it does this?
I already tested my RAMs with memtest86+. So, I can confirm the RAMs are normal.
i took a video of the issue can i send it here
yeah sure
brother
the menus and stuff dont cause the issue
Ok can you list everything you tried so far so i have a good idea
try this setting
yeah but thats the problem ive been running it on high settings since 26th it just started causing problems today and only outside of menus
alr
idk what they changed but ive play the game since 22th and 4gb of ram cant really handle it at high, mine is like a maxed out setting for it, anything higher and the vram will explode
hmm maybe some sorta patch cuz it was running good even up until about 3 hours ago on high settings
ill try those settings u recommended but i dont even see dlss
what is your full spec, you also said taskmgr RAM usage at 99%
only taau
ig ur specs is similar to mine whats ur specs?
endfield always take more than 6gb of vram on my 3060 12gb lol
even with medium and some settings turned off it still taking 3.5gb over 4gb of mine lol
this and 3050ti 4gb vram
turn up 1 thing and the whole pc exploded
u have a rtx 3050 right?
yea
yeah follow my setting you will be fine
what i genuinely dont understand is how it ran fine until now
since when can a 3050 4gb can runs at high tho...
its still causin issue after i did that
it was 😭
i closed the game to take a break and came back on and it didnt work
maybe a reinstall would work
settings u gave me
even on low it doesnt work?
When i fill the bottles it doesn't progress the quest
can you ss your taskmgr?
nope might genuinely be a driver issue i think im gonna try reinstalling those maybe
Try to fully relog
went like 8.2gb vram on release day
it isnt even using my gpu much
Wdym
on very low my gpu usage stays at 70%
check ur power setting
Um, Hello? Is there a way to link your Arknights: Endfield account to your Discord account?
no way on hell did this 3050 ran at 63c
its always set to perfomance
🥀
its a laptop
i had the thermal paint changed a few months ago
Log out fully from the game
I already did
no i mean thats too cool
i think im gonna try reinstalling
nah it used to go to 90 and stuff but now its cooled down a bit since i serviced it
ive been on balanced everytime ive played the game bro 😭 its just today that ive got this problem
The cpu and gpu temp is off balance 
I see sometimes removing the bottles and getting new ones help
GO GET SOME PTM7950 JESUS
Aight ima try thay
look when i open menus the frames back up for some reason
you also set the toggle to thermal
Only liquid metal can save the guy with that temp 
does it stays lock at 30?
out of menus yes but when i open menu it goes above 60
That seems like a dead system in the short term ...
Ohhh i understood what was wrong I was using amethyst bottles cause the ferrium ones went to depot 😭
i genuinely dont understand the problem cuz it was working fine
i mean, when it dropped it stays lock at 30?
not locked it fluctuates between 10 to 30
Good good made you check it 
ngl might be some kind of dynamic fps lock to help cool down your laptop
ive never had that happen before
99 fucking degree is not joking
ive had it over 90 since i got this laptop and its been fine
its been 4 years now
i even changed the thermal paste for the gpu and stuff
90 is still hot tbh
Those temperatures are really abysmal
Check the cpu clock, if it's too low then it's definitely thermal throttling
i feel bad for that laptop
i cant even feel the heat when i touch it
but do try reinstall if you think it will help, all i know is the menu things will happens if your system is somehow overloading
wait let me try
this is worse
hmm alright cuz i remember this happening one time with cyberpunk and i reinstalled it and it was fine after
is your taskmgr running in the in-game menu or in-game in-game
i use one of those small desk thingies with fans
i bet my balls
How? It should heat up the entire laptop with that temp
that after u got some good thermal paste this will go away
so who cooking with that laptop
ingame not menu
