#tech-support
1 messages · Page 26 of 1
It's only a 3050 issue
Im pretty sure I saw some people using optiscaler with this game in Vulkan
(but I would caution against that, could trigger the anticheat)
Render scale
Render scale
It's good enough at very high render scale
What are your device specs btw
when I turn on 120 FPS my GPU goes up to 80°C Is that normal? when I switch it to 60 FPS the temperature drops to around 60°C
Yeah I know fsr4 doesn't work in windows on vulkan... But it does work with dxvk I think so not sure exactly what's the issue
Then play on 60fps buddy
I mean it could be normal depending on the gpu.
Yeah
I mean 60 FPS doesn’t look very smooth to me cuz the frames feel a bit choppy compared to 120 FPS lol
alr gotcha
Yeah I'd run at 120 probably. Most GPUs won't kill themselves if they overheat. They just get slower until temps normalize
Well you gotte play on 60fps if ur device can't handle 120 for longer. U can always lower the graphics
yeah, i can handle it with lossless scaling btw
I think his device can handle it. What GPU you got?
Lossless will incur higher GPU usage btw. So you could potentially loose performance using it
RTX 2060
Mine peaks at 65.
Why I use a second GPU... Don't gotta worry about the overheard
Yeah 2060 good to at least 85 without any throttling
what GPU are u using?
And after that it won't die. It'll just slow down a bit
3060 12GB undervolted.
ahh i see
My dual 9070s run at less than 60 and throttle at like 65 I think... There isn't a set max temperature for all GPUs.
Yeah maybe, he didn't tell what his specs were
- 20 series run pretty hit. Had a blower 2080ti once and that thing lived at 85c and would just throttle 20-30% to keep cool
And had some 290x back in the day that ran at 94c 100% of the time
You can adjust the limit with MSI Afterburner as well.
MSI fps cap can cause frame pacing/input lag so use in game ideally
Assuming in game is good... It may not be
Optimally should not set over 90 though.
If you got a freesynx/gsync id set to max fps limit and let it rip
If not can decide if tearing or input lag is worst
I was talking about temp limit, lol.
But pointless to go higher FPS than what game runs at unless if it actually lowers ur input latency. Game does have Reflex for that too.
For capping, I just use its control panel, I never set it from the game or third party apps.
this quest keeps repeating itself, i talk to noffman, the convo ends and i teleport back to sub PAC but the quest doesn't end, i talk to noffman again and same cycle goes on forever, anyone else faced this issue? or anyone got any fixes?
I'd try relogging first.
i've tried
Oh yeah 90c can be bad.
Actually in my 9070s I pay attention to the hotspot generally. Max that I've seen is 97C and max is 110c. It's like 40c delta over average.
And yeah not much point in going above monitor refresh rate... But 95% of gamers have 120+ nowadays
hello guys im having issues downloading the game, when the 35gigs finishes it still download 10 gigs then 3 gigs, and after that it tries to verfiy then it resets to 0% is this normal? do you guys need to download 10gigs after 35gigs? it resets after verifying 99%
im on pc
no epic or steam
just the luncher
I had to resume mine like 5 times in two different PCs to install.
It's just borked probably
thats not the issue, mine resets to 0
dose anyone else have this problem?
no matter where i look there is no fix
Mine is 144hz GSYNC but the game max is 120.
Not with the verify step no. Just the download part
Which is perfect actually... You wanna stay caped a little below max refresh rate with gsync/freesync
did u download another 10 gigs then 3 afterward?
Dimensity 8200 ultimate + 12gb ram
Depends on the game really, usually I just set to 144, if osu! I go higher for as little latency possible.
I've only faced tearing issue on my laptop.
Ohh i guess have to wait they update native 1080p
Because im okay with low setting but not low res
Yeah it's just so that you don't reach 144fps, which will either disable gsync and cause tearing. Or if vsync is enabled it will kick back in and you'll loose a frame every time it reaches 144hz.
Then make render scale to very high. I should most probably give you higher than atleast 45 fps if you have all other settings higher it may lag in certain areas
where should i go for help?? with my issue guys?
I cap at 120/143, 220/240, 320/360hz depending on my setup
Nah, VSync is always disabled, that's bad. And if it's stable 144, it's fine.
Yeah that's the better way.
Then in the off chance it reaches 144 it just tears... But tearing above 144fps won't be super noticable
Nah, still don't get tears, I play games that go over that too.
Only ever faced tearing on laptop.
Go for 1000fps in osu, almost 0 latency
If you did like a high speed video of it, you could probably see it. But it's be hard to see by the naked eye yeah
With some trick you can unlock the 120 cap
I can sorta see it up to 240hz on my displays. And then it's just gone after 300hz for sure
Also gsync/freesync cause flicker on OLED so sometimes nice to have off...
I've not had any GPU issues, even at 4K the game only uses my 4080S about 40-60%. But CPU... There seems to be a bug with it with the CPU usage and Temps.
https://www.reddit.com/r/Endfield/comments/1qnw8yg/strange_cpu_gpu_usage/
OLED vrr flicker is much worst than any tearing
I just have it uncapped, I think game goes up to 960 during gameplay iirc giving almost 0ms latency.
I assume you know about hardware flip presentation model?
If not look that up.... Beyond 300fps you gotta fight for ever last MS of input lag
What do you mean high speed video of it? Like recording physically?
Yeah. Like I was saying though the more fps the less tearing is noticeable
Under100 is when it's super super distracting
Idk, never had tearing on desktop even at 60 back when I didn't even have a gaming monitor.
But I don't use OLED either, not interested in it.
Wouldn't that cause instability with gameplay?
no, its a feature built into the game for dlss frame gen, but its disabled otherwise
Huh? No but it involves getting dlss frame gen to disable itself
its more that its against tos since you need to mod the exe
or is this a dlss 1x frame gen hack?
haha
Nah man, alt tab with dlss fg + discord overlay stuffs and you can get uncap fps without fg (fg setting is still on)
But it reset everytime you open than game
oh neat. im on amd so I gotta like... straight up mod the game
whcih is uhhh
little sketchy
Seems inconvenient to me, I'd rather the game officially support higher FPS.
Wish it had DX12 option over DX11.
yeah... and then some fsr4 while theyre at it
Idk if fsr fg can do the same trick on amd gpu but in other games with fps cap dlss fg can
Fsr fg on Nvidia gpus can't do the same trick (i mean in other games)
And the funniest part is that it work on almost every games lol
oh thats an nvidia thing then
I actually do use frame gen, but with lossless scaling.
Got a whole ass GPU for frame gen
But still i don't understand why endfield doesn't add uncap fps
Maybe there's some mechanic or physics tied to FPS
yeah it should have uncapped as option for sure
well it disables it for dlss frame gen enabled
so its not an issue
I used to considered using my old 2060 as a lossless gpu but aesthetic wise it doesn't look good
you need a lot of bandwidth to do dual gpu... and 20 series is stuck on pcie 3.0 which limits it quite a bit
Well the game uncap it for dlss frame gen and i can use alt tab trick to uncap fps without frame gen on (in setting it's still on but it's disabled in current session)
since most mobos have 16/4x pcie 4.0 slots
Yea and that too
itll be limited to 3.0 4x which is not a lot on 90% of motherboards
I got a dual 8x 5.0 motherboard and these two 5.0 gpus just for this
like 16gb/s over the pcie lanes
thats triple 1440p though, its just a question of how many pixels you have
Mine is a aorus b660m pro ddr4 so i only has 1 pcie 4.0 x16 and 1 pcie 3.0 x4
Running lossless on 2060 with 3.0 x4 isn't ideal enough for me to try
“DOO NOT REDEEEM!!!!”
“DOO NOT REDEEEM THE OROBERYLS!!!!”
- someone probably
Yeah it'll cap out beyond some 1080p 150hz and below or something like that
If on 1080p go for it though
anyone else have high ping? i used to get 23 ish now i have 165
my monitor is only 1080p 180hz and i usually play with dldsr 1440p
it seems to be only endfield getting high ping so i dont think its my wifi
Will you probably can check it out then. You also get more input lag the less bandwidth. But you can mess around with it though
It'll work decent for 90fps doubled probably
To 180
hi where I can to ask support for my bug quest ?
Hmmm, i think after hearing this i have the motivation to try
Hit me up in dms for advice if you want for lossless.
Thanks bro
In this channel or you can go to the ingame settings -> platform & acc(2nd last option) ->contact customer support then look for a blue dot like thing on the bottom right and explain ur issue there
I actually dont have the logistics menu in my Facility list, is it a bug ??
I encounter a problem which I don't know how to solve: Whenever I open and start the game, at loading screen I got freeze not just the game itself but also my entire screen, I can't do anything except forcing to shut down and restart. Before that, I can play the game normal, but now I can't ._. Anyone know the solution please help me
I stuck here for 3 day now can someone help
I try to contacted CS but no response
Can someone reach to mod or someone that will help
Can a phone with dimensity 9400e run the game at stable 60fps? I wanna replace my potato device
yea, should be a-okay
mine dimensity 1200 ultra can run fine at 60 fps
what platform are you on ? and have you tried to verify your file integrity of the game ?
dimensity 1200 ultra = snapdragon 875 or something I think
explain the issue at hand ?
:(
we just can place 2 forges of the sky?
after i comeback form wuling game try to open aic plan and then i'm stuck
i try to contact cs but no one response
you should be fine
even changing device won't help
does it do the same thing on the other maps with the aic plan ?
i think yes
i can't move or do anything
there was people run into same problem
the requirements: Snapdragon 855 / Dimensity 1000 / Kirin 990 or equivalent @arctic depot
that's odd but yeah seems like a wider spread issue then
they also try to contact CS but met with bot
how about your phone?
i don't know what to do anymore
no hope
On pc, and I did try like you said ._.
best to keep reporting the issue at hand if it is affecting multiple people
i just hope they see our feed back and fix it
any recent changes to your system or any updates ?
Is this normal though?
normal if you're running the game on dx11
definitely not normal i only use 6 gb of ram max on the game
dx11 has a memory leak
great so it is a known issue then
just use vulkan 
well the only reason to use dx 11 is if your gpu does not support vulkan
but hey hopefully it gets fixed soon enough
If your GPU is >10yrs old, fair
2016 was 10 years ago 
yeah I checked and the only update I made was these
hmm well should not cause any issues overall
idunno a lot of things can go wrong when windows does a feature update
happened with 24h2, now we have 25h2
everytime i upgrade aic in wuling outpost my screen will be stuck here, this doesnt happen in valley iv so everytime i need to force close the game
known issue keep reporting to the customer service that is the only thing you can do for now
thx
have a nice day and well let's hope they implement a hotfix soon
The Witcher 3 is considered a retro game
yo bro what is up with this game....its making my pc go into overdrive
it wasnt doing that before
I just had tang tang blow up the wall and my cpu started heating up like crazy
fans were going full blast
quit the game and it went back to normal
Anyone knows how to fix this yet?
It's driving me crazy
Happens like every 5 mins now
Game's considerably more CPU-heavy than other games, especially on systems where it has to do the heavy lifting for older, "not supported" GPUs
It's just that people are just now figuring out their stock CPU coolers are not enough
it hammers 2 cores of your cpu heavily i noticed
I don't even ever pay attention to CPU temps. Generally you shouldn't worry about it unless it was a bad cooler install. You should be able to run your CPU maxed out which is more than the game will draw generally.
Also if you are in AMD and using MSI to monitor it then it can cause stutter so id disable.
People should learn that laptops require cleaning, at least once every 1-2 years
Computers can survive more due to more airflow than laptops
Yeah, though it's not generally going to kill stuff to clarify. Just make it loud and/or slower
Stuff auto throttles nowadays
Hell the laptops will probably just throttle all the time to varying degrees
Like phones
That auto-throttling is usually violent for temperature triggers
Is there any way to force my ipad to reach high graphic settings, it's stuck at medium
the game probably restricts you to those settings because it can't handle higher
At one point when I was still on an air cooler my CPU dropped from 4.9 to 1.6 upon reaching 100°C from an all-core chromium compilation
Aww shucks
Is there any way to bypassing?
i would not bypass it it will cause you more trouble than you want
Oh okok
Thanks 
it is what it is regardless have a nice day
i think the game config is running on SQL for the gamepad so unless someone figure that out you are SOL
meaning it is running database entries for gamepad changes
it's a pain in the butt changing those permanently
yes, it works
no it started happening recently....since the update
before it was fine
i was just standing around and it went up
yehm but it started happening recently. check the post i put above. lot of other people experiencing it as well
How do i change my game files location on PC
it's under the launcher settings
Do i need to do it before installing?
nope you can change it anytime
I see, thanks
you're welcome have a nice day
honestly the game is primarily running on 2 cpu cores it is normal that it overheats i suppose they are not able to fully multithread yet
I am saying that it started happening recently....after the update. There are multiple people experiencing the issue. It was fine before the update......
why do people excuse these things ill never understand
i am not excusing it just wait for a fix they messed up the threading pipeline most likely
ooof
essentially what is happening now is that literally one side of your cpu is getting cooked
you're welcome unfortunately i cannot relate since my threadripper is distributing the cpu load automatically
dang expensive pc for gacha lol
i used to build servers for a living hahah i refuse to go back
nice
what you can do for now is just limit your fps to prevent overheating
not sure if thatll help according to some post ive seen but Ill see
i usually clean my pc every 10 months
it will definitely reduce load on your cpu so less heating overall
been doing that since 2019
Respect
take care of your toys 
exactly especially when you are running 24 cores
I dont even think im using high fps. Im using frame generation or whatever its called
frame generation will still increase cpu load regardless
ah thought it used gpu mostly
yes mostly gpu is used but you are inserting another workload for the cpu aswell albeit minimal
up to you what you do with it
I'm stuck in a soft lock with the yvinne quest. I left her lab and now can't reenter to find her vinyls. any idea or solutions?
relog your account seems to help some people
how
Let me try
let me know how it works out for you
yes
thank you
So uhh there are no solution to fix my problem ? ._.
as of now the only thing you can do is report the issue to the customer service
alr thx
hope they help you out
Can I copy my progress and items to another server? I picked the wrong one because it showed less ping in the EU server when I first started, and now my main progress is there, which has a lot of ping. Can I copy my progress to the Asia server? 😭
nope no way to copy the progress it is region locked to the servers
Nothing to do about it
you know what you can try ask of they can transfer your data via customer service worth a try
Any magisk module that can boost fps of AE on low end phone
honestly most modules will only boost performance by about 15 percent
Gaming-X Magisk should be good for that
but you are pushing the boundaries on a device that can barely handle the game then
it is at your own risk
Sure I'll try. Thanks for your response 
you're welcome have a nice day
Do you have the support email id?
why game stuck in this screen
Wha do I do when I run out of power.. 💔
that's not a technical issue XD
phone? pc ?
It's kinda hard asking help in general 😿
there is a help section in the discord go there i am sure somebody will help you out
umm can someone help me?
i jus finished the last main quest in wuling
what do i build first ?
refer to the help section this is only for technical support
can someone help me how to fix nvidia app not detecting any graphics/system settings for endfield?
also my frame generation option in the game's setting is somehow gone idk how or why
Try restarting the app.
you can still things through the global settings too
DLSS Option Gone
Note: Hypergryph has intentionally removed DLSS for select graphics cards to mitigate possibly related bugs. No news on an official return.
- Navigate to
EndField Game\Endfield_Data\boot.config - Open
boot.configin a text editor, delete the following line:remoteBoot=https://game-config.gryphline.com/api/remote_config/1003/prod-engine/default/default/engine_config - Save the file AND right-click > properties > check mark "read-only" > apply
Is it banable to play this on Linux? I wanted to get this on my steam deck but I don't know if you can get banned for trying to use Linux or something cuz anti cheat shenanigans
plenty of linux people are playing the game
halo guys when i playing this game why always blackscreen but the game still working?
definitely looks like a unstable driver when this happens try to do the following that metalman suggested
Perfectly playable on Deck, if you need help setting it up shoot me a DM (you need to do some stuff on desktop mode, install ProtonPlus & Faugus Launcher from Discover)
Just some caveats for Deck use though:
Virtual Keyboard doesn't work, if you want to input text (schematic codes, blueprint naming, etc)
In-Game WebViews (for news screen, gacha rates & microtransactions) are broken
oke it fix now after i verify integrate and restart my pc now its work, thanks for advice
Alright, I'll probably try setting it up later. Was just worried if I could get banned was all lol since I've probably put in more time than id like to admit into the game already lol
good to know it works 🙂
i cant change my settings, trying to put fps to 120 and Graphic quality to very high but it doesnt switch at all
Hi! Can someone help me? I am faced with the problem that my microsoft surface computer has an arm64 processor and Windows 11 OS. When I try to launch the game, an error appears: compatibility problem with my arm64 architecture, is there a way to launch the game on this device, or do I just have to install the android emulator and run the mobile version ?
hmm did you change any files before trying to change settings otherwise try verifying your game integrity first
ok ill try rq
it's simply not supported run an emulator
(((
does anyone have this problem like me or am i the only one
also is there not a native android store on that pc ? there should be both windows store / the android store natively integrated on your os
your connections seems unstable looking at that picture. are you sure your internet is working properly ?
well i run any game and connection seems stable
you still failed to join 
are you using the native launcher ?
the what?
Could be some sort of routing issue. I'd try connecting to a VPN and see if that changes anything.
i just open the game from the epic games or the game itself
what vpn do u suggest
1.1.1.1
try this first and let me know your speeds ? https://www.speedtest.net/
sure gimme a sec
I'd usually just go with something like Hide.me to debug stuff like this. The free tier isn't good enough to actually play through, but it's enough to see if it is actually a routing problem.
will radmin or zerotier be good to use too or not
Depends on how you use them, I suppose. If you can use it to route your traffic through another location, it might. I haven't tried either of those tho, so I'm not sure.
ok i will try them
Havent found an answer to my question in this channel, so, anyone has a solution to Endfield opening new ports every 10 seconds? It keeps opening them without closing so there are literal hundreds in CLOSE_WAIT status a few hours, eventually overloading my router.
also for some reason it lets me play on the aisa server but i have to start from the start again
As mentioned, there are a lot of Linux players, including myself.
And at the very least, the mods approved and pinned the Linux guide I posted in this channel. They definitely aren't anti-linux
what OS are you running ? and share your system specs seems very odd
okay, I just worry too much sometimes lol, Ty for the help
Damn. I just checked my own system and looks like I've got hundreds of these as well. Hasn't affected my performance yet tho. Defiintely feels like some sort of bug.
I didnt notice either until the NAT table went full and I was unable to open new sites in the browser xd
Np! Enjoy the game 
Win 11 Pro 26100, 9070xt + 7800x3d, gigabyte b650 (Gaming X AX v2) ddr5 board and rams 32gig
overclocked cpu and xmp profile on rams but I have no reason to believe its related
definitely a capable system how about emptying the game cache so it resets connections and such
Um my thing isnt installing its been releasing resources 0.00% for a while now
Guys I have an old PC but I found something bit odd. Well my PC is I5 8th gen with DDR4 16GB ram but the GPU is GTX660 2GB. In game I get pretty good performance with around 60-50fps but randomly it crashes my whole system (I have dual monitors) and even the mouse isn't even moving
Close and re-open the game. That happens to me too
How do I do that? The repair thing didnt do anything and I cant find an option in the launcher either
Oki 👍
I can hear the sound playing but the display freezes
installing it on hdd or using dx11 can cause memory leak
how to fix it
my bad delete it manually
I use afterburner to check my specs bro but everytime it's normal
Your gpu is just getting overloaded you don't have enough Vram kind of normal
Any way to force shader compilation again? I updated driver, cleared DX cache, but no way to make the game recompile and now it's stuttering bad.
same thing check my picture up above
Good. Found another way too. Launch on VK, then back to DX.
2GB VRAM is definitely very low for this type of game. From what I remember 6GB is the recommended. You may get away with it on super low settings tho. Worth a try if you haven't already.
sadly this didnt do anything, close wait ports from endfield just keep piling up
does anyone plays ak: endfield works perfectly on linux?
Works great for me. There are installation instructions in the pinned posts 👍
okay, thanks twin
Hmm definitely report this issue to customer service i assume a hotfix is needed for that one
Ye, will do, thanks.
hey. how do i use fsr4 in this game?
3 days ago I was playing the game on pc just fine but today when I tried logging in, the game suddenly got lagged (all settings on lowest). Anyone knows the issues?
When I claim my pre draw reward it doesn't work, it just says I have no in game character even though I have one
Why the hell is Endfield using 25 GB of my RAM?!?
Multiple people
you can use Steam directly, or Faugus
Also, typical Asian game, uses 40% of my CUP and 0.2% of my GPU.
Memory leak. Are you using DX11?
I am not, and it does it right after launching
i'm using heroic launcher back then, but always stuck at white screen
8GB ram still works btw
even on 6th gen intel igpu
Heroic and Lutris are a bit buggy with it
Try installing the Windows version from the official site in Faugus (using dwproton from ProtonPlus)
i already done with it
yeh bro....devs broke something in the game with the last update. cpu temp going into overdrive after a while of playing......even lowering frame rate does nothing and I went all the way down to 30fps
6th ? now thats new
I think the yield and usage system is bugged, because it's showing me (screenshot) even though I have all the ferrium and Originium available on the map and I'm maxed out everywhere.
Looks about right. What's your dev level for Valley IV?
even on amd fx cpu, it still works (according on yt)
Yeah uh... then you missed an Originium node somewhere.
does it go to 90% imediatly ?
idk
i heard that the game eat more ram cause of the cache that it doest off load
when you use a igpu
Might just be Windows doing Windows things. It likes to keep RAM cached if it's got the space to do so.
always has been, but hey. they're not gonna be cpu bound
im using a i3 8th
cpu stays at 34%
Look guys the only reason why there is a memory leak is because they most likely broke the garbage collecting system
and also the TAAU feels kinda buggy
i'm still using intel xeon E3 1225 V5 which is equal to core i5 6600 (maybe)
for AIC building, it's great, but for competitive?
does it lag on combat ?
not quite often
restarting the game works for a bit for me but it eventually goes back into overdrive. Strange thing for me is....the temp is really high but the usage is low.
Yeah, the game's pretty much unplayable atp
im kinda worried if the game reaches 96% of memory
heres a post about it and thats just those that report it
theres probably tons more
the quetion is
does they changed their thermal paste?
yeah
I am IN A MENU
jeez
its not the thermal paste unless that was a joke haha
specs ?
The final boss of menus right there 👀
Ryzen 5 5600, GTX 2080, 32 GB DDR4 (3200 MHz), Win10
Are you using TAAU by any chance? I have a strange hunch.
i'm still use an DDR4 2400 (ECC active to 2133)
works great, but not for forza
it's default, idk i want to de-active that
Even if I am, I am not sure I can get into the game long enough to change it before it freezes again.
there are 7 which of the programs are eating the ram ?
Only one of them's the actual game, the rest seem to be some kind of sub-processes.
My theory (based on literally nothing but a wild guess) is that TAAU is bugged, and swapping to DLSS/FSR might fix it.
TAAU is forced, im trying to find a way to brute forced it off
I guess you'd need a RTX card to get the DLSS option 
he have a 2080
Really? Why is there no DLSS option then? Unless the only DLSS optinos are too recent for the 2000 series.
probably
Hello ppl. is it normal for game?
trying to read this
looks like memory leak
13900k 8 cores on 100% load ...
TAAU is not causing any problems for me though and i am using a 9960x and 7900 xtx
cpu ?
8 cores what about the other cores ?
Yep
8 cores on 100% is a tad much, yea. Especially on a high end CPU like that
100% loaded in game - 1st time i see game that can do that
non stop load
are you on the highest settings ?
i tryed all settings - no matter what u do - 8 cores always goes at 100% load and stuck
i heard the second map have some really funky fog that wrecks performance
but is this even on the first map ?
all maps
jeez
The volumetric fog does seem to sike performance, yea. Even on high end systems. I had to put mine down to medium to keep it from randomly dropping to 20FPS.
On ps5 I keep getting stuck on resources loading , anyone else ?
how much vram is it using ? for it to be 90%
Another memory leak great
high settings ?
It's without Direct11 option game load, with Direct11 u have few cores 100% load and memory lick
With 8GB of VRAM, 90% makes sense.
Licking memory is an expensive hobby these days 
Best to report this issue to customer service with this memory leak so they can hotfix it
untill now
is the patch today or on sunday ??
maybe sunday
why does the background look kinda pixelated? gets worse with other cutscenes too but couldnt get a screenshot
my theory is the TAAU
Im using dlss
then i dont know
i though this was normal cause on low settings
Looks like some form of low quality Depth of Field effect.
oh ok ty
It's been like this since launch has to do with the rendering engine they'll change it soon enough
oh ok
AA such as TAAU and DLSS being applied on top of depth of field, instead of before depth of field.
Yeah it's very weird but i already reported this issue
Anyone else having an unstable fps? Like i can get 90fps but it somehow drpps to 20ish fps like every 5 seconds but the thing is my gpu isnt even fully utilized and just sits around 40-50% its the same on any graphic presets be it very high or very low
Specs ?
I7 13650hx
rtx 4050
12gb ram
1tb nvme ssd
notebook ?
what
oh wait i miss read the model
didnt saw the x
oh wait it is notebook(laptop)
hows your CPU temp?
Yup it's a laptop
Endfield actually uses your GPU? How did you get it to do that?
Most likely throttling
I dont really know how to check it but it only utilizes 40% at most
4050 is a 6GB card, I believe. VRAM getting filled up and having to dump/swap could explain the FPS drop. Make sure the textures are set to the lowest possible.
oh ye, didn't notice the 4050, VRAM loading in new stuff could defiantly be the culprit
Also definitely try to use DLSS with Performance settings to see if that helps. Might take the load of the VRAM.
Rtx 4050 on 1080p should not cause issues
im always using it
True. But tbf a lot of things that shouldn't be happening seem to be happening right now 
thats what im thinking too
how does GPU load look if you press ALT+R?
only 40% utilization and its sitting around 65c
ye GPU is basically sleeping, albait a little hot for 40%
ive been trying to figure out how to get it at a stable 60%+ utilization
ive seen the game beings table when its above that threshold but it just wont stay there
Any chance the laptop has some funky power savings featuers in play?
im just using smart charging atm
Is it nvidia? You can try setting the exactly endfield exe to use the dGPU in the nvidia control panel.
I had similar issue on wuwa and it seemed to have work back then
if the charging thing doesnt work.
i'll try turnijng it off
Hi i make a mistake and hit clame trying to move the rewards to the backpack please help 🙏🏻🙏🏻🙏🏻
ok nah its not helping
still stuck around 40% uti
Not a technical issue bud go to the help section
youre cooked, this cant be undone
60 fps limit, if not already.
Vsync off. (should have gsync already)
DLSS quality. if that runs bad drop to balanced.
Framegen on (since I guess your display is higher refresh than 60)
Shadows medium
Fog medium
Texture quality high
Scene details Very high
Vegation high
Screen space reflection High
Contact Shadow OFF
Don't have a webbrowser running in background
game got 16gb RAM recommended, you got 12. Any closed app in the background is a win
my frame gen option is gone
on day 1 it was there
Now that's interesting
After some update its gone
only the dlss thing is present
but nof rame gen option
Why’s it saying failed to connect to server
i think dx11
that's why. Have you tried running it with vulkan?
I enabled the checkbox below the play game on the game splash screen
How to do so
It keeps failing connecting to the Server
turn off the game, and uncheck that box
and whats the difference? btw
Im curious between vulkan and dx11 since alot of game asks between those 2 to run it
Same for me I’m confused, is the game down?
Difference is better cpu usage and utilization
Its Not down but maybe the Servers are overloaded
Vulkan is a lot better for multithredding, where DX11 prefers low core/thread count. It also speaks native language to hardware (kinda) while DX11 needs a translator in between
Seems like a server issue perhaps a temporary outage
Probably overloading from all the ppl playing at the same time cuz its pretty new Game still
@meager jewel your laptop shouldn't have any issues running vulkan, and should technically gain performance by using it
Yea you should not use DX11 unless you have a specific reason to do so. It's not a good option.
why the hell does the VPN connection runs better than my actual connection, this doesn't make any sense
Internet routing is dark magic few ever understood properly xD
the constant 0-1ms display doesn't make sense aswell, like I'm not sitting inside the server now am I
ITS FACTORY TIME!
Well i can tell you right away why because some vpn node connections are closer to eachother then isp nodes
if the servers are far from you, a vpn might connect to server near you and then connect to game server using a server near the game server
the VPN literally connects to the same city server/node as my ISP/regular connection does
game ran perfectly fine first few days in terms of connection/latency but for like 3-4 days it's been a clusterf
Maybe your ISP has some funky traffic filters, and decided to put a throttle on it. Sadly probably more common than we realise 
yeah i turned it off and my frame gen option is back
Is it running more stable though ?
Should be since he doesn't run any fossilized hardware
i also tweaked the texture quality to low while the other things are still at very high now it runs perfectly smooth thanks you two
Apparently they are blacklisting specific GPUs from using DLSS and/or Frame Gen due to the pixelated background issue
Something about them not working well with the more advanced DLSS 4 features
if your GPU usage still is low, remember the graphic settings I posted here #tech-support message
Since I think you should be able to run the game at higher graphic settings than you currently are
Alright good to know
I will try email support for help i was hoping to find help here but it seems this is community help not support from the company.
I appreciate the help from the community. Hope everyone is enjoying the game. Best regards to all
to soften the blow, the stuff from that event is extremely easily obtained in game.
you can them in like
a few hours of playtime
its not a big deal dw
i tried running TAAU now it utilizes 80%+ and it somehow gets even smoother
try it with DLAA
im just worried about the temps being at 72-75
Why’s my game saying failed to connect to server
No issues with other games right ?
Yes
A lot of people seem to be having that issue. I'm starting to think the login servers are struggling.
CPu is safe until around 95 degrees, and the GPU 85
Yeah seems like the servers are having logging issued
Like my internet is fine, wuwa,Genshin, hsr, and zzz all working 😭
Have they announced that it’s a known issue yet?
Or we just have to wait a while
Not as of yet but a lot of people have been reporting the same issue unable to connect
Ah well I hope they fix it soon
Walkthrough on how I created my minimalist fps overlay in MSI Afterburner.
Download Links:
MSI Afterburner - https://www.msi.com/Landing/afterburner/graphics-cards
Font (Open Sans) - https://fonts.google.com/selection?query=open+sans
Circle Image - https://drive.google.com/file/d/18dUOedYl7NRs_3-wKgIJe1_HG0zwyJHS/view?usp=sharing
OVX Export ...
7 min and you got a nice customizable overlay
A little bit of patience nothing to do about it for now ❤️
teleporting to my wuling sub pac is a crash 100% of the time 🙁
Did you monitor what happens when you do so ?
wym my pc usage?
Yes are there any spikes of any sort ?
hm the cpu does spike to 100% as it crashes
its not just the tp that crashes me its the whole zone
Hmm
yo chat why cant i play endfield
black screen on vulkan
1 frame every three seconds on direct
but people with worse specs can play the game fine am i cooked?
Running dx 11 or vulkan ?
is it me or the audio is bugged when re running the game?
vulkan
Can you try dx11 and see if it does the same ?
Specs ?
Is this on laptop?
Because from what I've experienced, the game hates Intel Graphics 😭
I need more than that search for system information
alright
yeah its on laptop
theres alot of stuff in system information
what do ya need to see
Do you know if you have a dedicated GPU in your laptop apart from Intel?
Share all the pictures so we have a full overview
nah
should i just dm it to you or place it down here
System > About is pretty complete now in W11
Placing it here should be fine
im having 30 - 40 fps loss in power plateau is it the same for everyone or do i have a setting wrong or something
Not really
idk that looks plenty to me
thats allat ram
Windows 10 doesn't have the one above
Yeah that's DoF implementation fucking up, but surprised it's the whole scene
Is it even still about DoF
oh yeah its this
IM TWERKING WITH THIS
what the hell is DoF dawg 🙏
Depth of Field
does everyone had this problem or only those in lower specs range?
ah yes
Same same info but yeah a 2 core cpu is not cutting it
is there anything i can do to fix it or am i fried
Still can't figure out if you have a GPU, go to task manager > performance > gpu then it should have a name there
uhh this is what it shows
Ah okok
windows dont usually show the right search u want🥀🥀
Your system is simply too old
am i fried or lowkey enough to play the game at low settings
ur deadass not gnna able to play the game dawg
my system is simply too old
Try out dx11 if it works
it finally reached the end of its time
Older GPUs might not support the shader level that the game needs
try uh repaste and some cleanup?
Even my phone runs it better than your pc 😂
aw hell nah
stuffs old like that tends to not getting any care
its so over bruh
Look on the bright side. At least hardware is cheap these days, right? 
i just did some disk cleanups to gain space for endfield
dk how to do repastes though
Regardless of what you try to do
bro i have no job
i mean hardware cleaning
guess i gott wait til im 21 and genuinely get an upgrade
It aint cutting it
dust and stuffs
lmao
nuh uh this is the worst time to buys hardware ive seen in 20 years of my life
Truth. Was just being silly. (It helps mask the pain
)
@proven sundial i wanna know how old my specs are
like how old does it have to be to be rendered unable to run endfield
yours atleast 7 years old
ohhhh shit
thats pretty behind ngl
well i did get this from my father so it makes sense
It's 9 years old bud
not really the matters of how old it is. js how good it can handle heavy loads and stuffs. but 7 is quite too old for nowadays
is gen 7 that old🥀
damn im really behind
that gpu is 10ish years old
It is what it is
To be fair there is 10 year old hardware that could do well here. This is just fairly low end, even back then.
well
As long as you run it on ssd it will run fine.
can i inject it with compund V so it overclocks and be able to play endfield for 24 hours
laptop from 2016 having an ssd lol
No need to tell him lies 😂
nah bro it gnuinly runs one frame per 3 seconds its NOT running fine 🙏 💔 💔
You could watch an Endfield slideshow.
20 minutes for a 5 second dialogue
Ofc cause u allocate 5 gb vram only on your igpu
Try to increase it to at least 16gb
how
Uhhh nvm u need more ram
Don't listen to schiess just accept hard reality
Is that gtx 940m gpu?
I'll just assume you aren't that tech guy who can't optimized your own hardware.
It's old but endfield is optimized
idk bro my hope meter is kinda very high rn i might just believe anything good LMAO
Bro i make servers do not bullshit me
is there way to bypass the device isnt compatible?
Who cares it's software not hardware
It just clear to me lmao
U don't know shit
Do what you want
ye but its at 0% so thats that
For you to shut up if u aren't being helpful at all
I aint listening to bs
might as well try atp
lets see how far this goes
You aren't using your dedicated gpu arent u
Make sure you have a fire extinguisher on hand 
Since your igpu has more usage
no i dont even know how to use or modify my gpus
Endfield could never be this worth 😭🙏
Better to have a laptop with no Endfield than have no laptop and no Endfield 🙂↕️
Have you tried to update your gpu drivers to the latest on nvidia?
nah
i have 10 outdated drivers brotato
That's the problem too
i dont bother updating them
You gotta update your gpu drivers to the latest
wel atleast til endfield
So you did already?
what
Worth pointing out that Nvidia stopped supporting this line of card in their drivers last year 
i didnt know you could update your gpu
damn it im one year late
It's an sol situation regardless
It was nov i think still good enough drivers to boost fps
i will genuinely play endfiled on 25fps bro
im not missing out on endfield
😂 ✌️
so uh
how do i update it
Yea try doing that lmme get link
https://www.nvidia.com/en-us/drivers/ try to find your gpu name here
Select geforce
Like this
Select game driver ready
Yes
How to fix crashes on Xiaomi pad 7?
btw
Its 900m series i think
i see
i typed in the whole name and nothing popped out before
i was about to say that
Got ya
Try and clear your app cache on android
Still doesnt work
alr
Was it working before ?
Most of the time it will
60fps consistent for sure
Endfield is very well optimized
So I'm confident it's just drivers
i see
well were about to find out in a few seconds
Restart laptop first before try to play
should i download it somewhere else
so is the file path good?
Yes
do we have a fix for fckass pixelated DoF?
Nope not as of yet
does everyone had it or just some specific one? like low specs guys and stuffa
this game has no borderless fullscreen mode?
It oocurs with a lot of systems i'm running a 7900 xtx and 9960x and it still happens
Just a rendering issue really
it is running with borderless fullscreen
thanks
I'm running ryzen 7 57003xd and a 4080 super. I haven't encountered such atm.
i have some friends with even lower specs like mine doesnt have such problem
Maybe corrupted files etc
Can try to verify integrity or repair the app or launcher
makes no sense, they did made a file verification whenever the game boots
but will try tho
just restarted and now gonna try starting endfield on directx wish me luck
Goodluck. Hope it runs smoother now.
anyone else crashes when they try to change resolutions..
i mean it doesn't really crash, it's just completely frozen now
Depends on your monitor probably or your gpu can handle the resolution u want.
Are you going for higher resolution?
i'm changing it to a lower one
cause my game keeps freezing constantly
it was using like 13gb ram just now 😭
whats your monitor native resolution?
1920x1080
should be
i changed it to like 1200x900
actually choosing anythin kinda just freezes it
idk google said changing to windowed might help
Weird it's first time i heared it
Try changing your native reso on your display settings on pc first
does anyone else have server issues since launch ? i get disconnected from the server so often its literally making me want to stop playing.
To reso u want in-game it might help or maybe not
hmm alright thaaanks
Sure lemme know if it works
well i mean it kinda improved
It's been happening to a lot of people
has the devs said anything about fixing their servers yet?
it is? Hmmm....
anyone else have issues with purchasing things through epic games? like completely unable to buy anything
Welp I'm not assuming your are using hdd which is quite bad ngl....
I saw one reddit thread on it but not sure how many people are talking about it
u using paypal?
nope
Like i said sol brother
just like not being able to purchase anything, not even a payment window pops up
This is a known issue
yeah global data lines (idk what they called them in english) are getting fucked, u can use cloudflare it works great
ok cool wanted to double check
wait i should try out vulkan
triple the performance, cant ask more than that
no vulkan is terrible on these old hardware
sorry idk how to do that. can you explain or tell me how to search it up?
Try it. Vulkan gives more performance most of the time.
Especially on old ones i think
its doesnt divided each generation like directx did, running vulkan would be running the latest software with the oldest hardware and its not the greatest combo
u are on pc yes?
yea
here download it
it just a vpn
time to pump and dump some penny stocks
bro i got as far as the endmin peeking on the elevator
thats like a 50% increase
First change dns to 1.1.1.1
i am trying it now
if doesnt works, then u can install and try warp too
he js installed it i think, hey it works with me and i only know that much
thanks, i did that already so am onto warp now
u can try cloud gaming
Both are same tbh, it depends on how u setup it
ah but i hate those typa stuff with the queue and all
And Warp isnt Vpn
Fighting on with a full 5 fps ?
It also uses same 1.1.1.1 cloudfare
wdym it is technically a vpn? atleast thats what i read on reddit 3y ago
Hmm hmm, If you properly setup dns, that will be enough.
nextdns is free if cloudflare doesnt work
am trying it now and seems stable enough
its weird cause i did change my dns a couple weeks ago to that one
does it reset or smth?
either way thanks you both!
I mean it does secures ur personal connection, but there isnt any option to change regions like typical vpn have nowadays.
Its just more than 1.1.1.1 but it is built on same 1.1.1.1.
In some rare cases dns doesnt work and warp helps
Most likely bcs of a problem in ur net, someone explained abt this better few days ago.
ong vulkan is still a black screen
this truly is over
back to roblox ig
😔
Well i was right all along
Look on the bright side. At least nothing blew up!
well i mean he was technically right updating your drivers optimizes your game and stuff
Updating drivers on that was not going to help a dual core cpu and a 2gb gpu run it
It's a lost cause
damn bro 2gb
is it a known issue that the game crash when you alt tab before a loading screen ?
Trust me bro i would save your pc if i could but there is no helping that one on this game 😅
Anyone know how to fixed this ? ._. it the reasons I keep crashing the game but I don't know what to do :DD
well atleast i know my father only used this device for storing files and stuff
Ah well atleast the machine has been doing its service
yeah, probably gonna modify it once i get a JOB
Or build a desktop at some point
A cheaper option is getting a phone that can run it
true..
im not used to phone controls though which sucks
Im pretty sure most androids can connect to an Xbox controller
Exactly a nice alternative
Speaking of controllers, I wish the game would let us map buttons because combat is wonky for me, I've kinda learned but it still feels awkward 😭
If you want a phone recommendation, I'm personally using Moto Edge+ 2023 and it's running well for me, it can run the game and it's like $450
That's the automatic crash sender log
Not the crash reason
Factory work on controller is fucking awful, combat is okay
I find factory work kind easier than combat, but I am pretty early in so maybe that's why. But combat is weird, have to use the bottom of my thumb knuckle to dodge and my thumb to attack
Learn right-sided crab, you don't need RT & RB
Thumb on cam, pointer on X, middle on B
Yeah, that feels even more weird 😭
Appreciate the advice tho, but the game should really just let me map my buttons 😓
Hi, when i close the game, it still keeps running in task manager and doesn't let end task and can't start the game either since it keeps showing the game is running.
Having to restart pc each time is kinda annoying
If you have a controller that has remapping software (like an 8bitdo), you can swap-remap B and RB
Or map B on a rear button if you have them
Nah, I'm running a base Xbox controller
I basically map all my basic attacks to RT because of shooters
Can I run Endfield via Socks5 proxy?
I have VPN client up on my router (Russia) with local socks5 gate
Pretty sure the Xbox app lets you remap to some level of control?
Pretty sure it can, but you need to tunnel it 'cus it doesn't support proxying natively
So if you use some software that configures a virtual interface for the proxying, it'll work
Hello guys. I've been here for over an hour, the monsters haven't appeared, I've already tried everything I could, teleported, went far, far away, reloaded, checked the game files for corruption, and completely restarted the game 10-15 times, but nothing helps, I've already tried everything...
https://github.com/wiresock/proxifyre
Something like this
I love this game, why me, why my account with this error 🙁
How did you manage to install it? I have the same phone but it doesn't appear in the AppStore...
Thanks, I'll try to catch it on the router side then
Don't want to add new variables in the scheme
If you have an openwrt/opnsense box, that's a choice as well lol
crazy🥀
Someone know how to fix it? Please
Yeah, I have podkop vless cliend on my openwrt running
i'll try to add HODCA CDN providers to the tunnelling by default
sorry i dont remember such fight
howd u get into this btw? i want to learn some too
maybe looking around
Uhmm, i have a proplem in this quest. When I went to talk to Noffman, It didn't let me complete the task; instead, it sent me back to the teleportation point and kept showing me to talk to them ༎ຶ‿༎ຶ
they could just not at that spot
But I've tried everything, run every inch, killed every monster in this location and all the nearby ones, absolutely all of them, and even watched how others complete this mission according to the guides, everything is fine with them, I'm the only one who's such a miserable idiot.
sooo like is it normal for it to start using more and more ram the longer i play...?
Are you fuckin' kidding me, after game restart i see this, but mission not completed, what the hell nah
There's a known bug causing a memory leak (I think when running in dx11 mode?). If it gets to large, just restart the game.
how long do they take to answer support emails, it's been 3 days 
man

happens in vulkan too
Guess I haven't run into it with Vulkan, so maybe hardware dependent?
hmm, perhaps. maybe i'll try a fresh install
Did the allfield and returnofall codes expire? 😔 I guess it’s not 11:59 pm
this game hate me, thanks
can someone help me guys, i have the app, already viewed character view, but still can't complete - Appreciate the help in advance
'
o/ Just reporting that on mobile, the left and right triggers while using the 8bitdo Pro 3 aren't recognized
set the controller to dinput mode, if you can
it doesn't work in console-compatible mode
it's an 8bitdo issue on android
should be a switch on the back with 3 positions
X, S, D
X for xinput (wired & dongle)
S for switch input (bluetooth, dongle & wired)
D for dinput (bluetooth, wired)
Ohohoho, thanks! I was indeed on S mode, I'll try D and report back o7
Is anybody else having this issue on mobile?
Comes when trying to login and goes back to tap to continue screen if I tap on it
This started after reaching wuling, I get lag spikes going in and out of the city region
another advantage to that switch is that you can set it to X for PC, S for Switch, D for Mobile
and get 3 connection profiles out of it, so you only have to flip the switch if you want to switch devices
(if the dock/dongle is plugged into the PC and you use bluetooth for switch)
Whats wrong with the Game rn

