#aic-factory
1 messages ยท Page 483 of 1
Hey guys! I just started at the wuling factory and im a bit hung up on how water works here. While i get that belt moves at 0.5units/s and pipes at 2units/s, the way water capacity drops by 1's, 2's, or a certain number is confusing me. But my main concern is pipe splitters. Do they slow down production the same way belt splitters might? I've run some tests on four different setups to compare (refer to the 1st photo) i added capacity usage and maximum so you guys can get their flow. But the capacity numbers arent making sense ToT is it the flow rate or the facilities? If anyone could explain the underlying math behind all this id rlly appreciate the help!
jesus lmao I actually hit the building limit on main aic
the last forge has been an issue
Dont look at the number of liquid in the pipe
many such cases
What should i do??
pipe max flow rate is 2/s
you can calculate current flow rate by the ratio in pipe for example 16/32 = 0.5 x 2 = 1/s
Wait...does it affect capacity?
Also dont always look at it 
The way they display flow rate is confusing
that 2/s is a scam
longer pipes keep more liquid, yes, but it doesnt matter.

Like when a pipe is full it always show 2/s
pipe only show max flow rate so u have to manually calculate real rate by yourself
Flow rate at 2/s when full, right?
No

Uhh lmao i dont..
youd have to sit and see if its a constant 2/s or a fluctuating one, or calculate yourself
Flow rate must be calculated manually to be correct
pipe full = 2/s or more
Well to me its always 2/s eveh while running
think of it as all pipe section is a storage tank, and that 2/s is how much they can pump to the next one
Each pump gives you 1/s flow, each facility usually uses 0.5/s
remade the factory, now it's exact change
You must calculate it yourself how much flow is in a pipe
if you want 2/s in pipe to calculate then you always needs to connect to 2 pump to 1 conduit.
@stray jasper
eventually 4 sources of sewage (since they all produde one per 2s)
Wait wha 16/32 is the capacity right?
only conduits bother to show the actual flow rate
yes agreed, the statement before was for water only lol

capacity ratio x 2/s = real flow rate currently in your pipe
assuming nothing clog your pipe
Ooohh
Man came here with a question and now he has even more questions 
It will take a while to process things
I dont want it end up like the belt splitter again..
Then again, production speed
most input is 0.5/s, the harder question is to calculate the output especially when you try to converage pipe
im at max at what we can currently produce. any suggestion on what to use the meta regional transfer?
simple
pump = 2 unloaders
pipe = 4 belts
This one's confusing.... pipes always at 2units/s (flow rate) but you're saying 1/s
it's max vs real
or maybe im just blind and havent encountered 1/s yet
max vs real
pipe can do max 2/s
but can you put enough stuff inside the pipe to reach that flow rate
you can merge 2 pump into 1 pipe sth like that
Pipes have max flow of 2/s
But Pumps are 1/s
So you can put 2 pumps into 1 pipeline
Or as every facility is 0.5/s, u can put the output of 4 into 1 pipe
or how much will overload your pipes
one thing that rlly surprises me, for the first time, pipes do actually change flow rate but belts dont.
what im saying is the flow rate displayed in the pipe isnt always true
Ohhhh. Pumps are 1/s
finally connected my pipe system to the new area, the gain in power usage is the most impactfull, -7 waste treatment consume a lot of power, i was above 6600 now i'm below it 
bruh
@stray jasper reason
example
oh right
one thing you guys might notice if you do a lot of 2/s pipes is
im at max at what we can currently produce. any suggestion on what to use the meta regional transfer?
splitters and mergers sometimes bug out and fail to deliver 2/s
@tribal crescent send me some mortars pls
i was above 8000 when i started my full overhaul now it is this.
its a completely random ordering bug but you will eventually hit it
for turrets put battery in
free 1500 bomb
its full, anything else?
1 pack of 50 scw battery is enough for like 6700 rounds of fight
i want 27 mortars
nuh uh
ohh, the 2 pumps is new to me. How do you do that? connecting 2 into 1 pipeline
2 from random spawn, 15 from myself, 10 from sahred
it's ok as long as i have enough for trading
different types of bottles to fill different type of liquid
no need to shutdown anything
I don't really get this new purification node. I used them to clean the two sewage pools, but what else can we use it for? Aren't they far away to the factory to serve it?
pipe converger

do we need different types?
oh
nothing is too far enough

pipes will go no matter what
also you can save power

does show off counts?
So they want us to connect the pipes up till the factory? Damn
Soo fusing 2 pipes into 1 thru converger, does it affect flow rate?
there is nothing to do
its not too hard to do with the conduits, just need some effort
there is nothing else to do in game anyway
they adds up
so why not go for it
Helps prevent the case of factory clogging if you're trying to split multiple different liquids from bottles at once
max is still 2/s
it does. it gets to maximum possible
1+0=1
1+1=2
1+1+1=2 still
just remove some relay tower to turn it off
Hmm
Should i move all my plant production to jingliu valley?
A certain video taught me to not let tang tang in charge of battery manufacturing
A single pipe can handle up to 2 units/sec.
So what's shown on the flow rate rn in the pipe isnt showing the actualy flowrate and there's a formula for it?
o
it shows max
You don't need to do it if you don't want to, but it's just like a 10min run back and forth with conduits
pipe max limit is 2/s
1 pump produce 1/s
1 machine use 0.5/s
so 1 pipe full load can handle 4 machine
but generally most things work with 1/2s
or 0.5/s
except a few
like pumps who do 1/s
So this for example isnt showing the actual flow rate but the max
yep
most of thing work 1 / 2sec
so 30 / min
but some 1 / 10
that's 6/ min
what do you use to get sewage? i t know u can refine cupium but what do i do with those cupium it's all clog and no sewer
Now i see why you guys saying it lies
its the same with belts, its just the speed
you make sure you don't clog cuprium
that's about it really

yes max flow rate not actual rate
what do i use to burn them?
produce Hetonite to consume the cupium
or cuprium components
okay thankyous
Flow rate is just the carrying speed of it. Think of pipes as like belts. Belts have a flow rate of 0.5/s, pipes at 2/s
send extra sewage to water treatment to delete it
or send to purifier node to recycle it
bruhhhhh thats ez to miss How is anyone supposed to figure that out on their own? lolol
just math it
Well an empty pipe still shows 2/s
you can check real liquid usage in aic
oh i meant i want to get them not get rid of them
or try and error. normal stuff
Back then i only figure out the actual flow based on the gap between the items on the belts, now pipes im using formluas to figure out the actual rate
making hetonite and cuprium will make sewage
oh and xirconite effluent/inert
wait no
makes sense.
you can check from database in the game
just heto and cu
im gonna write everything down lmao
there are no formulas. just simple + - * / 's
@stray jasper rough estimation of your image is sth like this when calculate
hetonite, cuprium and xircon
someone dropped one
when in doubt check the database
i know i the problem was just i cant burn my cupium because idk what to do with it now ill just make 3 of cupium part makers
๐
feel like teacher is marking the paper lol
make yazhen syringe A
YO. sooo capacity is multiplied by flow rate
Yeah, basically just gotta do the math since we can't see gaps in liquids
wish the dev can add the ratio in the tree
oh sorry
sewage usage -> mix it with liquid Xiranite (Xiranite + water) to make Xircon effluent
then use Xircon effluent mix with Ferrium powder to create Xircon (Solid)
then use Xircon (Solid) mix it with Dense Originium Powder (DOP) to create SC battery
excess Sewage can also be use with Purifier Node to make Xircon Effluent, 30 sewage -> 1 Eff (rate is very poor, only use on excess sewage)
HHHhhhhh man
welcome to the rice fields
note that by create Xircon effluent it also create "Innert Xircon effluent" (Innert) which can be recycle at Purification unit (unit not node)
yeah why so many powder
inert xircon effluent can also be treated in a water treatment facility
but they cannot be treated in the purification depot in test area
sewage only
discrimination tbh
but what can you do
I can feel the asian pride running in my veins
still less than sandleaf
sandleaf has more uses tho
sandleaf: plz let me rest
but generally we wouldn't recommend use water treatment unit on Innert
because we can recycle them back into Xircon Effluent
never

note that if you recycle you will create extra water and xircon effluent
use purifier, what question/statement is that XD
which uh
it's just im suffering from this i cant get sewage because this thing is full
you may need to calculate if they are worth to use
a purification unit costs 50 power, same as the water treatment unit
wym u use only 71 whtat even is that 
what are you making bro
๐ญ ๐ญ
show base
fastest way is to dump like 10k to V4 first while you finding solution
core000000000000000000011_23-a1
one thing bother me, why it call Innert xircon effluent
what innert mean that liquid too dry and very hard to move
and how did purification unit just extract water and Xircon Eff from them
it should be call "Dilute Xircon Effluent" instead
read the description of the items
even the sewage
there's a reason why we can recycle sewage back into effluent
also for inert
but that doesnt explain why it's innert
basically there isn't enough xiranite in that to react with anything
so it's inert
latest event got me into the farming, here's my plot! Kinda proud of it :)
yes I put the chubby lung statues at the entrance
I see
You can use 1 for two fields so could lower it to 3 per row
I did try it, it ends up having the "end" plot unwatered tho
How is this??
Oh yeah, you only have 5, you can place 6 in each row
1 forge is on standby
bro ๐ฅ
Yeah, but each column is its own unique plant type, can't add more
it is nice, but after finishing the base, all I see is 512/512 from the manifold
i can't use it man, already maxed out
I mean, if its good for you like it is now its still good ๐๐ป
Just wanted to say you could have more
How can i make 3 comp at the lowest yield while making sure it wont gobble up the whole factory material?
Cuprium part is a dead stop for me cause its all used for hetonite
I hit the cap of max constructed machines AND max pylons lmao.
plus i don't need that much heavy xiranite anyway rn, already maxed it out in depot
.elasticpeak
Same xD
Just do lots of splitters
splitters and converger to speed limit
cuprium comp?
also how many lines of cuprium do you have
or maybe just screenshoit base
I ask chatgpt for the setup lol
Well all used for 30 hetonite per minute

I wonder if it can figure out doing the prime splits
now ask 7/min
should i open up my game and do nothing
yes
Yes
okay
tho
Literally my artillery line up on energy avlum
lol, obiously not train well
normally you should
on a bloody single player game
I love artillery barrage
I have 8 set up and now all i need to do is sit in a corner and wait
okay what now
Currently rushing through 30 sanity potion soon to expire
here is not pretty version, yield is 3/min
fr, i burned all of them a while ago

Oh neat
Can the rest applicable?
omg i didnt do my 3 deliveries today
im so washed
good thing i logged on for no reason
gahhhh the small trinkle of xiranite is now approaching 80k ๐ญ
you just need to determine what speed you need, and set up spliter and converger accordingly
i need the speed REALLY FAST like a piston
Do you notice it crashing even when not playing a game or playing other gacha game ? Which has anticheatxpert ?
at least not
Oh- so by default, pipes are given 1/s due to pumps...
only crashes with endfield
tho like
since it's kernel
it's treated as system level of important
and it dies mean my pc dies
lol
well it is ACE.sys
due to single pump connection
i don't play other games with ACE either
is sewage from cuprium 0.5 or 1 actually
mmmmhhhh.. ok
mmmhh..
0.5
OMG MIKAPIKAZO
omg someone with eyes and a pixiv account
YESSAR
0.5/S, 1/2S = 0.5/S
if the machine can push 2/s liquid out onto a pipe will it do so
or does it stick with 1/s
Pretty cool 
or 0.5/s
it will be 2/s if machine can do it
...does it push 1/s like pump?
right now there isnt one
the only way to get 2/s is by multiple source and pipe converge
what machines get water out?
lol should have added 0.33ml
oh
Pump and purification unit
YEah ! Purification!
and purification unit when it purifies inert xircon effluent
note that the ratio is 4 inert to 1 effluent and 1 water
so the actual rate will be lower if you don't map 2/s inert into it
or 4 crucibles worth
wait. I cant still follow i havent touched that part yet ?v?
lol
when you can unlock purification we can talk abt it
the pandora box
ill ask when it comes to machines that has a water unloader

it used to be black magic
Lmao
but right now we have magic number of stuff
to make it simple without too much thoughts
coz if not done properly.....instead of 0.5/s, you might deal with 0.25/0.33..etc bad stuff
priortiy pipes?
but you didn't hear anything from me
lol too late
๐คซ
Man's trying to poison his mind
anyway dw abt it too much
no i think i get it. It's only a method
ye
endmin not making more orignium for my gear is making me insane
so called child of originium
zzz
where are the catastrophes when you need them
Astrophe's cat
holy crap got an essence with +4 on first stat and +3 on last stat
Something like this
Not sure when or what will be use but still crazy nonetheless
Phone shot cause i cant screenshot this for some reason
Unfortunately no
That essence has 2 sub stat
use your hard earn bill to buy tickets to target farm?
Elec dmg and atk is the same branch
guys
I dont need to cause everyone got their own essence already
my factory is making sc battery for power, lc for stock bills and buck capsules. am i doing everything right
And i still have 100 to spare
Oh..
So in other world its entirely useless now
Sheet
biggest pog cuz of the +3 3rd line, gg... altho #salt-mine-gacha-flex
bruh I literally never got this
since I always use tickets
Oh thought it was more for operator roll
Why am i not gaining prosperity when selling?
Cause its max for this current version
Gotta wait for future update
Ohhh
any news on when they will increase the stock bill rate ๐ญ
next patch
source: trust me
source: it came to me in a dream
and next patch we'll have ||Chen SP||
Source: trust me once again
Need more aic events, i love aic events
I hate aic events
No way that is silly chen
Cant really hoard gourds anyway since daily stock bill is limited
you don't know when my wife got serious..

guys what should a proper factory produce? mine does SL battery for selling , LC for powering and buck capsules
I got like 13.5/m sc
6/m heto
12/m heavy
btw turns out I don't have to worry about ferrium not being enough at all
since I put ferrium dust into depot
Will it really last that long
once xircon clogs, ferrium dust will accumulate
and vice versa

or if your hetonite line is slightly off of 100% (mine apparently is)
eh wouldn't worry too much
Use metastorage from valley iv
71k ferrium dust in depot rn
if you're still at valley 4
try to max your ore production first
at max you can make like 18 buck A, 18 HC battery + some buck C
but if you're not at max, you can make whatever you want
if you're at wuling already, start making xiranites and wuling batteries
you can forget buck capsules

Ferrium is strictly worse than dense orig to metatransfer
things would balance itself out eventually
I believe it will just shut itself down lmao
im still on v4 and thanks
there's no way ferrium deficit would get my scw yield below 3/m lol
iirc max is 1080/min ferrium, 560/min orig
and for the purple stone.. iirc it was 240
if youre outputting ferrium powder, it wont affect everything else
which seems to be what youre doing
ye
but that specific setup will just turn off forever
might as well remove
save power, etc
This is hysterical. Went through the trouble ferrying literally all sewage that wasn't being used for batteries or one of the heavy xiranite lines and that's how much extra Xircon I can make lmao
what u mean turn off forever?
the rest can still be utilized for hetonite
so the machine consumes 0.5/s unit sfrom the previous pipe's units
yes
unless somehow I clog them both, which is unlikely
ohhh okoky. Also by 1 full pipe, you mean max flow rate or full capacity or both?
consider them to be the same thing
like belts, something that has no gaps is at the max flow rate
both
hour passed, you still at this pipe flow rate
1 pump 2 machine
2 pump = max flow rate on combine pipe

Maybe in a day I'll get to turn on a third battery line for approximately like a few hours
yeaa.. lolol
I just wanna make it reach 100% efficiency ๐๐ผ
saw a post on reddit about a wall blocking pipes in markerstone from outpost level up so i went and checked . . .
funny enough the xiranite forges still run
so not sure if i need to move things
Technicaly the new sewage plant can only generate 12/m XIrcon Efluent, right?
I mean the "max" it could ever generate
very stupid fencing, there's nothing inside there either . . .
Oh was gonna say, 12? I can barely manage 6 lol
yeah, the "hypotetical" max
If I've done the math correctly, since the 3 treatment machines can only do 2 sewage per second, that's 360/m, which translates to 12/m xircon efluent
yea 60/(30/(2+2+2)) = 12
Is there any blueprint with every thing that is in the game for wuling.... I can't find one

Funny that even before the update i dont use that space so it doesn't matter lol
damn fencing

search Kyostivn on YT
must correct...
Does his blueprint have a code
Iโve pretty much got the pipes down, but Iโm still a bit confused about the machines. Is there a way to tell how fast the water is flowing inside them? Or does the flow rate not really matter since machines usually just need a single unit anyway?
the codes are on the comment section of his vids I think
Oh so I can get every base blueprint
watch his videos, you'll get it pretty easly
actually nvm...there are some recipes that needs 2
Holy fuck I just noticed for myself now lol
I'm guessing this is the top for now? ๐ค
We usually use unit per second to measure liquid flow rate and item per min to measure belt speed, for example the xircon formula needs 1/s effluent and 30/min shredded ferrium, then it gives 30/min xircon and 0.5/s sewage
I guess they perfectly built the fence with 4 holes
Is there any 1.5/min sc bttery bp?
nah, you cant' place pipes through it now
if you had it before the level up they still work
but cant move
4 holes that instantly repair themselves like amoebas when the obstruction is removed
I also noticed the reactor crucible has 2 liquid inputs so it prob helps speed things up if i insert 2 xircon effluent. Also how much flow rate is even considered enough to run 1 machine at full efficiency? is 0.5 rate enough?
depends on the recipe
You just need to match the formula usage to run it at full efficiency is
soo pipe flow rate doesnt matter? as long as it gets in. What about recipies that asks for 2 like Xircon production (fluid)
Pipe max flow rate is 2/s, that's way more than enough
What you want to consider is the speed that you make effluent, since you can only make 0.5/s from 1 recipe
But you need 1/s, so you need 2 effluent making machines
Maybe if I take this one line of inert effluent alllll the way up to my core AIC with the facility space I don't have, I can set up a 1/4th efficient effluent line and maybe get 1 additional Xircon yield!
Value
Im curious where did you guys find out machines take 0.5/s?? It's never shown anywhere in the game. You guys are scientists xd
Itโs kinda obvious tho
Mathing out the intake
looking at the formula
for example this uses 1 water every 2 seconds
its super good
i hope they dont add premium belts or pipes it be pretty good if they double the speed cuz then you wouldnt need have messy belt work and have like proper overflow splitting
not sure this bug or not,
but some time water from my lower outlet (2/s full load)
not given water to my top left reactor
now I have to connect extra outlet
in Valley IV i produce:
Buck capsule C: 24/min
Buck capsule A: 18/min
HC Valley Batt: 18/min
and i still have originium 20/min extra yield
any advice?
fix for now, not sure will it drop when I go offline
If you've already made 1000s of production units and don't feel like manually transferring Dense Originium Powder, then just let it sit there. 
what production units?
Refineries, Mines, etc.
why would i need so many?
To instantly make them as you need (on blueprints) in newer regions
that's good enough, you can have everything in shop,
and later you will buy every thing and make Valley 4 storck useless
so I suggest if you are not going to flex production, I suggest dont do anything more
Just got done figuring out pathing. Without glitches or exploits, going from Marker Zone up into Wuling City takes less Conduits than cutting into Jingyu Valley and going up into Wuling City by 1.
how about origocrust?
sure why not, just make sure you split it into 2/3 (20/30) so it doesn't effect main production
thanks
20/30 is
20 use for yours origacrust
10 stash it back to storage
do i make more sc batteries?
yeah, you can make 12/min fairly easily
nah im so confused i actually have no idea what im doing , what should my fac do
i def can i just dont have space well i can do some shenanigins with protocol storage
with your xiranite limitaion this is all you can do,
do main mission to unlock more Skyforge
what should i do next?
Surely this pipe can survive a relog
then let me introduce you
99% max profit (1% left due not making splitter too complex)
bro squeeze that buckflower fact more its taking too much space
you probably don't need that many thermal banks, save off the excess into a protocol stash so you can sell them later
but what about the power
idk what do make for valley 4 what should i produce
Guys what machines can cause sewage?
just make some lc's until you can make SC batteries
thats it?
Hetonite
and heto
well how much power are you generating vs how much power are you using?
then try to speedrun through Orginium lodespring and Power Plaute to unlock steel , then imporve the factory CUZ YOU NEED STEEL
Just refining?
i think i did already
and xircon and heto production
nvm i dont have sand leaf
oh nice then make Ferrite parts and steel parts and some dense orginum farms until you can make 6/min HC batteries
so only make batteries for v4?
if you have power platue unlocked it'd be fine
v4?
valley 4
yeah cuz in wuling you have better batteries
okay
you should try to make 10>=/min batteries in Valley 4
you can cut it too if you plan on making the Buckflower health pack thingy
I guess the machines designed to unload liquid are the ones that can cause sewage
cuz those need steel or if you make Canned Citrome (A)
My sewage control x_x
well yeah all the machines with recipes thatr produce sewage will produce sewage i guess
whats the first thing i should farm/produce after unlocking the wuling AIC? Im done w/ Valley IV final factories, but im hella confused on what to do in wulijg
okay thx
Honestly. Wait until you have water piping and then unlock forge of the sky and build at least one of those. (With water)
xiranite, batteries, and syringes are the main sellers in early wuling
Afterwards, progress sorry until you unlock the first AIC and then go casually. No need to rush.
Xiranite first, if your power is too low. Bring some batteries from V4 temporarily.
xeranite is the start of everything
Then battery and unlock ferrium
hell. I'm still using v4 batteries
already done that, pretty surei. also unlocked tangtang stockade
unlock the first set of facilities and produce lcw batteries until your first outpost accepts them, then produce scw batteries and yazhen A meds, then once both your outposts take scw batteries and heavy xira/heto parts then produce those 3
Ok with tang tang, then make sure you have all ore. And then copy blueprint
xiranite is hard to build tho
Don't use V4 plants. The WL plants make it much easier
And blueprint always solution to hard factory
maybe might as well play story till u unlock cuprium
should be pretty simple compared to the big battery lines on v4
https://discord.com/channels/950244160684834837/1487561669180788867
I still use this guys blueprint (it's almost half as big as my personal)
Plus 2 options. 25x40 and 20x50
Best to get familiar with Xiranite production lines
you might be making a lot of them
~~battery lines only big if optimal ~~ looks at my two originium and one xiranite battery lines in WL
I do have a symmetric one that comes in at around 25x30, completely modular, and I'm real proud of it
Symmetric single? Or double
(60/s)
Cus fruit's is a ... Triple.
I really like my single but it's fat.
But it also has a single point of water input accepted from two sides. And modular. So not that bad
conduit off center I kid
the cool thing about this is 3 of these will fit the main aic exactly when laid side by side
Definitely count belt nubs
Pipes ... It depends personally.
pipes depends here too because side by side you can daisy chain it into 26
https://youtu.be/MYPkDnEYJXY?si=TuMwdQQf_HPqdPQo
Can someone help me with this video
Blueprints code:
Asia:
Wuling 1: (EFO0101O36708ai90E179)
Wuling 2: (EFO01A7u1e4A6UE769ieO)
Wuling 3: (EFO017i89AE70e54eO2Ai)
Wuling 4: (EFO01eAo0UOeai4uuoui8)
Wuling 5: (EFO01u8U4o6u230U8AeOU)
Wuling 6: (EFO012O9A5u2UE8E3e3Oo)
Wuling 7: (EFO017i89o8o6E583O2Ai)
JV Bottom: (EFO01a6584543eA47oe5e)
JV Top...
what do you need?
There's lots of optimization available but it removes aestheticโข for. Efficiency.
Ah hey, another sensei
i also like my double forge
You can watch minehttps://youtu.be/NuKfmdMs8I4
0:00 Test Area Review
1:13 Stats and Economy
2:27 Preps
2:51 Sky King Flat
3:37 Main AIC
7:07 MarkerStone
9:13 Sanity less Behavior
Code For NA/EU
Asia on Pinned Comments and in Process
META transfer Condense Originuim Powder
Sky King
Xiranite1
EFO019A618a6U7e215UI2
Xiranite2
EFO01A5ie97i42EO691eO
Main AIC
โฆ
it's pretty easy to set up and make more than kyo's
I wanted help with that bro cuz I set that up
I was somehow able to squeeze 9/10 of my xiranite into my main aic (while keeping all established factories the same) while still keeping enough realestate to add more stuff.
nicely organized
snek all the way ๐
embrace the snek ๐ slithering technique
is that 8 forges of the sky?
What's with the two outputs on bottom Sandleaf planter?
10
You asking me???

in a sub aic????
oh i see
the idea is when you actually run the pipes, it'll come out to 26+26+27=79, and your main aic is 80 wide
which is why I love my solution so much
Can anyone help me with it
wide lol
it looks like this
Alright, what's the matter?
pin time stamp and I will take a look
After 13:09 he deleted everything and then rebuilt why tho
super tile-able
And that's 32 x79 all with belt nubs right?
Fruits 25x40 doubled for main AIC is 25x80. Which. Is insane to think about.

I thought that was for people already built his facotry
I think you're already set and done
as long as your batter is 13.5/m you shouldn't be worry about it
yeah
I built everything before 13:09 and then I reached that and then he deleted everything and I was left shocked
Mine is 14.75 btw
It also clears any jams and residual liquid. Common fix for if a BP doesn't work
You missed the first sentense my brother
at the 13:09
So it won't affect my production
Like it won't improve the production
Yep
as long as you see 13.5 battery and 12 heavy xiranite while turning off all the components
the very first thing he says is that it's only for players who used his other 1.2.1 video
In your video I don't see a jungyu valley BP
I still can't get over how KyostinV just flushed all the xiranite efluent into water treatment.
I named it sky king flat
He did WHAT ?
Wait you're getting 17 extra xircon from test area?

is this normal
vertical pipe in the middle always blank and water just magically teleport to top pipe
middle pipe never show any liquid inside even if checking info
No you're joking..
Yep
Yes
This good enough?, what else should i make
I think I need to pipe more sewage ...
Tho i am running half heto
I'm slightly dumb and set up a conduit.... And not a manifold....
And now the conduit is at max pipe capacity....
Yep, you heard it right, there is not production on xiranite, it's all goes to water treatment
Oh...
WHAT ..
No..
Why

pretty common bug
He's bad at pipe, i guess
I called that out on one of my video
why 2 extra copium refiner?
Well do yours BP has gear production??????
Xiranite. More. Follow a blueprint.
and don't use buck flower. The WL plants are 4x as efficient
even it doesn't produce much, it works as a buffer to filled up the lost xiranite while producing compoment
They are called "extra" for a reason you know
and sometime whole pipe stop working because of this
Yeah, and very easy to use
For when 2.2 comes out and increases the cuprium mine efficiency once more
I basically wanted a BP which just provided me everything the wuling area has

~~i understand inert into treatment. But. Full effluent? Dang. Ouch~
You just turn it on when you need it
even if you forget to turn it off, it wouldn't product too many of them over time either
I am low on gears yk
0.25/m on xiranite/cuprium component
0.4/m on cuprium
Aiya, so slow.
Give me max efficiency component for like. The two hours my Hxira lasts lol. and then I choke on it and it starts to clog everything else
then you can just delete that over complicated belt and connect it normally, then it will goes 3/m
If I turn it on it won't lower my xiranite reserves
Not meant to trash guide makers tho (you guys help players and that's huge)... but holy shite there are some questionable guides up there

If you need fast gears.
Just put some stashes on V4. Manually fill them. And belt them into a gearing component. Ez solution lol
And some aren't even easy.
Kaysum.. let realsuke help
I abuse the teleports and put basically all my conduits next to them when available
so despite having to pipe sewage from all the way at marker stone, I only needed to run on my legs for 2 nodes
Too many helpers confuse him
??? if you use my blueprint, yep, it produces extra 13/m of xirnanite if you don't connect stuff to test area, 18-19/m if you connect
I havent seen Kyo's base yet but damn the amount of people going here to ask for help with his bp is just..
Marker stone. Is. Oof.
I rebuilt most of my cuprium in main base.
Make a response video where you repurify and recycle his effluent.
Title it "increasing Kyo max production"
I set up his factory for my video once and I was suprised by flushing the xircon effluent
Basically every ytuber suggest his bo
nah, you just put on random splitter and converager and look at the production
guys is this good for valley 4 what else do i need to make?
Make MORE
more of what
He makes clear and easy guides. And it's easy to follow.
might not be the best. But it's great for beginners
I have 30k bottles of effluent, I should turn on the 18/min heavy xiranite tap soon lol
Just play Valley 4 at your bare minimum effort, save your passion and energy for Wuling
HC valley 4 batteries.
Buckflower and citrine A.
okay , when is wuling unlocked
When you finish V4
When you finnish the story
Finnish
When patch 1.0 drops.
that is after what point

finnish
if i take down a zipline in valley IV and put it in wuling, will it still have the same amout of likes?
laughs in sami
Its gone
When you fight a Giant Stone that looks way too sexy
i think around ch3?
just by stashing it?
only about 120h into the game
Yep
shit, i had quite a few with over 100 and some at 300-500
dang ok i
yall check the likes on those
i only just killed triagellos ive got a long way to go
@pine sail this part is a bit confusing and how to increase the gear production
This is exactly how he flushed those xicon effluent down the drain
It surprised me when a random memo got.. over 1k
i just checked when removing them from valley iv
it DECREASED
Nope. Nope.
My eyes hurt looking at that
Nope
the areas in v4 are, in order:
hub base
||pass||
||quarry||
||science park||
||lodespring||
||plateau||
you'll have to clear all of that to get to wuling
remove that and connect normally, let me do it for you
It will be a huge help
Very dedicated 
okay ty
๐ค
This way xiranite coponent and cuprium will be running at 1.5/m
this should do
but if you turn one of them off, it's gonna be 3/m
and the heternite will also be running at 3/m
but be warned, you can produce too many of them
And one last thing I won't run low on xiranite or any other product if I use the full gear production not that partial one......

as we have limited catalyst per week
You can turn the cuprium component off, then xiranite one will be running at 3
Actually. Question for you, I know you have the space to spare (and the depot bus to spare)
But why separate the bottom right depot node. Why not. Zigzag down from the left side and depot it from the bottom. Make the double double xircon belts slightly shorter?
100
Not component the xiranite raw

not enough ๐ญ
Dude, just stick to one Blueprint plan, either my BPs or his BPs, we should have xiranite covered
I think .. i never thought of that really because i didnt have the expectation to have such a small secondary heavy xyranite line so the goal was to make it symmetrical and to as far right as possible
saved the depot node. Use it as decoration as a flex
But it serves as deco there too
This was the original idea
But SIRcon has no other use and we only need 12 scw
That looks spectagular
Mine is like this tho
Cuz we only need 60 SIRcon
Wait using the extra purified water for a planter is actually genius.
DON"T, NO
it's really bad
I tried that once and ends up make an appology video
Big fan of the ominous black boxes in top left. Kinda mysterious
because once xiranite is maxed
This is my current layout
Your factory shutdown
Yep
because purified water stuck
The whole thing about wuling is how 1:30 of an effluent can frick your entire system if you try to backloop

Honestly .... My factory shuts down twice a week.
last night. Cuprium capped new depot so no sewage, so no xircon so no battery so. I might try it
But thanks for the heads up
Oh wait you meant. Actually using the plants. I just want more. I'm at 8 k and would like it at. Maybe 20k both
how did you able to capture the whole factory in 1 image
I saw your build the other day, I can see OCD is consuming you through your lay out
I didn't
that's a compliment btw
That was a bunch of ss stitched together
Huh wha- ? Huh ?
I am on and off and lurking here
vi go make a base with only plant being sandleaf
Make a double xiranite compact blueprint. But no water.
a good challenge i believe
actually I had a . Kinda ugly one. Might fix
I admire your patience tho..
Honestly if someone came to me asking about someone else's bp i wouldn't really help

well he did try to link his first
But he did help. So. Props to you tbh
More like certain things happened and im traumatized with people asking about troubleshooting bps

I happened to set up his blueprint before, so I think I can help
If it's my blue I can almost tell the issues by telling me the numbers, but I can't really do that with someone else's BPs
Honestly... the blueprints forum has so many more blueprints with smaller footprint and more optimized... But it is hidden from people by default iirc
Well ya.. if someone is using my design i recognize immediately

Blueprint forum also. Sorts by like. Recency?? The older ones are the better ones.
Making video and being good at game are two different skill sets
Generally you can't have both
Ha- such is life
just commission a vtubers to make your video and $profit$
Imagine if haruna makes a guide on how to make the all-in-one pac
The amount of people flooding in here asking questions
I can already tell "How do I pipe acid im at my limit???"
is gonna pop up a lot
But dang that factory is impressive
everything in the main aic?
"why can't I place this ???"
Tbh. I've seen a video where someone's guide was. Place this bp. Let it. Something.
Delete half of it and place this bp.
Like. One BP was a Kickstarter. .... I'm like. Bruh. That's way too confusing for general people. Too much work.
up to date with the new forge limit?
Yel
I have so many people come to me, just to find out they forget to put sandleaf somewhere, accidentally deleted a pipe, or iddn
i saw one for 8 forge
inclusing auto switching forge to make Xiranite and Hxira?
'or did't pay reasonable amount of attention to my video
He had built that 12 fots layout before the update came out
(i did too)
Not yet
Forget Sandleaf. I understand.
Accidentally deleting a pipe???
That project is hard.. Hecker is having issues
I can see it being feasible. I have like 3 redundant productions lines turned off in the main aic
can probably replace them with xiranite forges
idk abotu heto though
I don't even know how that happen
this blueprint won't fit. Let me delete some stuff off the side to make it work
He just came in and said: oh Found the problem, one of the pipe is somehow not connected
I purposely made my 2 parts of the double xyranite confusing

See if any funny person is gonna ask how to connect
anyone did mistake slike these?
Wait it's two parts? Too long? I thought skinny enough to fit one bo
Longer than 50
Its 13x60
I mean. It .... Feels self explanatory
It js
Follow pipe. Make sure water good
where is yours
We do a lil trolling
uh what should i do with refugee camp and ifnra i didnt place anything on those


uh
place things
that make things

I'll see you tmr. Good night ~
i recommend speedrunning v4
Oofs. I went looking for the BP. And found out you just posted it....
then uses a ultimate v4 bp or sth
Main PAC no input/outputs. Wasteful. Unfollowed, blocked, reported.
3 relay towers top right. Extra wasteful.
No zip lines in base. Why even share this
Middle is fine. Looks good to me
Oh right.. mb i should have placed more to fill the space
is this max?
Its max as your heart wants it to be
Damn, this is pretty good
@pine sail just watch your video, and I got some question
how do you deal with Excess Xircon effluent? or there wont be any excess?
it's not max btw, max should be 14.75 battery, but we already produce more than we can sell by 20%+
Holy pylons
Oh, I use them to produce the excess xircon effluent and clogging the xiranite to gain 12-13/m extra xiranite
nvm was wondering, but already more than half facility limit used for xiranite forges ๐
Oh into hxyra ?
This part specifically,
clogging xiranite?
yeah, you will see xiranite is not feeding at max speed, and clogged by xircon effluent
is this a website for preview?
that's how I deal with extra xircon effluent to get extra xiranite
You need Effluent to create HXyra
And effluent is from liquid xyranite so by jamming extra effluent in he slows down Xyranite consumption
enkad it's in hte pinned messages here
website factory planner/simulator
Im using test area to squeeze that extra SIRcon to get 14.75 battery
Or.. i even doubt if Im getting 14.75
It is higher than 14
tyvm
haruna did use my triple forge for the all in one, but modified the pipes a bit
You don't need test area, the main constrain is not xircon effluent and xiranite, the main constrain is Ferrium
He sure did..
Nope the main constraint is .. dense originium
For me at least*
Yeah, Ferrium and originium are equally important, but originium can only goes into battery, but ferrium can goes to heternite and syrnige C
Anyway imma sleep fr now..
I dont plan to run C
And my heto is only half, maybe that's why
NEVER do C syrnige this patch
Night ~
night

that's interesting, so you dont have to control sewage manually I like am doing
Everyone got their witch craft to control their out put
I mainly use depot unloader and belt, rarely the pipe
- Overflow valves for fail safe with pipe splitters (i cant do this)
- Control with material inputs into the facility (i can do this)
I ask Hjoyn, he show me that output picture, but he haven't explain how he calculate it, so I just cant just trust him fully.
My goldfish brain ๐ can't handle complex mathematics
Yeah, I make the blueprint base off his calculation btw, I just calculated myown and get the similar result
me too, but i'm excel god and that's what i'm doing
I thought with originum meta transfer, the most you could go is 14.125 without depleting anything?
behold my creation!!!



