#aic-factory
1 messages ยท Page 469 of 1
I need to clean up my hetonite setup, anyone got some good compact ones?
I've place 6 sets of conduit manifolds going from main aic area to the purification nodes. LOL
what's your map facility protocol usage now, the one with 350
ok so if i dont import effluent and instead make my own, i use:
60ori
15xira
7.5ferri
0.25water
0.125sewage(loops)
with a byproduct of
0.25inert effluent +
0.325sewage excess
i cramped this entire thing in, plus i have turrets and ziplines, plus i also have automatic watering at the eco farm and im at 496, so you must have used quite a lot in your build...
Manifold and 2 pipelines
please delete that farm
so the reason im clogging is because my treatment is overworked
i was considering that, it does take a chunk
but also, the food is useful
wdym 
same lol! did you place down another set to bring the xircon effluent back?
respect
don't need to use it now other than power saving, but setup for now because it might be used more in the future
ofc duh
manifold and 1 pipe handle sewage, and the other pipe handles the effluent
dunno how much food you needed for this game.... like the extra stat is just for trimming
I was debating whether it was worth it. I still have 2 extra forges im trying to figure out what to do with.
whats the math on fluent import
was sorta annoying, but felt a bit like an achievement
I placed 5
aka, how much sewage do i move to purifier,etc
i don't math, just go with my instinct
every unused sewage ofc
how does that even work
I realized too late I could teleport with the tether so I just stuck with my route. xd
splitter converger, etch...
very nice tho
you can teleport without breaking conduit connection
Yeah blasting the farm was enough to get my main AIC area filled to the brim, gonna go back and just use whatever's left after this for that lol
nevermind I found it
I just need to limit my crucible thats making Xircon Effluent now 
what the f***
pretty impressive, what's its power use?
destroy the plot too if you needed more
my whole factory at full load is 6.9k (nice) which i have already turned off a few sections
should aim for 6.7k
not bad
can you check how much sewage youre purifying
yalls' are so much better than mine
any belt design to split 3/4 or 0.75?
Don't suppose you have blueprints? I normally make my on setup but the structure limitation is going to get me unless I optimize
organize yo pipes
nah i cant make another hxira line cuz id be at 270/min xira which im already at ~270/min usage so the forge wouldnt have any xira to use
no
3/4 is 1 - (1/2*1/2)
if using 30/min for 1 cupri refinement, about 160/min?
13.5/m SCW, 12/m Hvy Xiranite, 30/m Hetonite, 30/m Xiranite
160?
? with 12 forges you have 300 Xira/min and 2 forges for HXira
how
yea im already running that
i built my factory modular
so it is just plug and play from my various components
wdym using 30 for cupri refinement
5x30 from cupri, the extra is from the 1.5 swc crucible
i'll just have to sell the rest of the xira
i dont think 1.5scw is supposed to make 10/min
its basically an hxira/min anyway
@zealous gust
yeah, that's why it is about 160/min, dunno the exact number
well, sure, though I was hoping you had a copy/paste of the xiranite setup.
i do
here lah
I have to go back and make a fail safe for the sewage on that one xiranite line making effluent for the extra 6/min hxira. If it fills up then effluent stops and sewage stops which stops cuprium 
168.49
Wait...so what is the use of the new purification node ?
roughly iirc
free effluent
for completing the sewage draining quest
Just free effluent ?
vi, u know how to make 18/30?
<0.2/sec free effluent
Cause I dont think we have a source of like..unlimited sewage beside our own productions ?
i end up just use 0.25+0.25+0.25 
there isnt
we use our own sewage
you can subtract.. its smaller..

whos gonna bother bringing sewage from other areas
ROFL, the biggest question atm is what even is the point of the Purification Node
a lot actually
....well I guess since I already built this long overhauling conduit oulet...hopefully they will get used in the future
I did, I dont even use the effluent 
it works!!
like, just build the pipeline
probably
free xiranite
I am so disgusted by this thing
gather all sewages in one place then manifold
just wait till we can actually pump out 30/s sewage
I doubt we can
we still have to put down like 10 conduits down to reach the unit no?
great
max sewage can be treated is 6/s
So I guess in total we just make 4 Xiranite forge to make 4 more batteries ?
no ori
Manifold and one conduit or pipe In, and 1 conduit or pipe Out
no ferrium
max is 6/s but we cant reach that when producing other things
Oh, Welp, 3 xiranite and 1 heavy xiranite ?
the purification node serves as a waste processing unit.. because your leftover sewage has no where to go
so this is just to.. at least get something back albeit its small
also save power
i can do with just 4 set of conduits
wat
in wuling only ig
2 more in test area
I did 5 in total
well if we count both area than it is 6
i used 5 sets per
yeah 5 pairs, though idk if I can do it again for another line, the teleport into test area was pretty nasty
i forgot you could teleport
alas, im gonna have to redo the entirety of my freakin base cus i had heavy xira in the wrong area ๐ฅฒ
the amount of hours i will now have to spend to rebuild my whole base
ah lovely
what were the originiuim veins for tho
for you to use
i didnt check how much extra it gave
I don't feel like redoing, it'll only last 3 weeks before I have to flip it again won't I
wrong area?
ye cus i need to add the xira pipes from that one area ๐ญ
At most I guess I'll build a ginormous sewage pipeline at some point
do I need to build it 2-way?
Are you doing any evil production hacks like meta transfer to achieve this?
its just metatransfer ferrium dust
Hmm
mine's one-way cus I haven't even bothered unlocking lv4 
I just see 4 devices that are a product of feature creep
I'm too lazy to pipe heto sewage over
@craggy oyster
u make 5 xircon from it?
maybe i should do ferrium and turn it into dust cuz 1.5 sc only needs 7.5/min ferrium
couldn't you have just bottled it and moved it to wuling instead of piping it
what
I need to build more xiranite now....
320 power 
where's the fun in that
Me when things go wrong in my AIC.
So with this you have
2 H Xira
10 Xira
ya
And 2.1 battery production lines
wasting all this space not stashing cuprium tbh
not like power is an issue anymore
I have an array of thermal banks ready to void excess sc batteries if it starts piling up
meta transfer doesnt matter for xira tho
Are you just using meta transfer for Hetonite production?
still matter to me, getting beyond 6.6k kinda 
I'm not at my PC rn, so I'm just taking notes before I sleep
Meta transfer heavy xira
nah i shut it down for all in medicine
on second thought... maybe i shouldnt do that..
I used to shut everything down except my rigs.
Now I just turn off the planters since they're the ones that get everything going.
What does one do with the extra ori ?
make more battery
The normal one ?
Huh ? You can only have 2 scw battery factories due to lacking of feri no ?
no ?
wait does one get a new feri node to raise it to 120
nope still 90
i suddenly have a xircon effuluent shortage all across base any clues as to why that might be?
I cant figure out why my originium output is 530/540 and its not full I checked every pump and they should all be operating at full speed
im using kyostinvs blueprint
Then you are capped at 2 SCW batteries cause 60 feri for 2 batteries and 30 feri for hetonite
im not running hetonaite at 100%
im running 50% hetonite and 1 full yazhen a
the the last 30 is split to heton and battery
Ok thats a strange schematic, why not 100% ?
you can do extra battery by using metatransfer
im close to capping hetonite and i feel like this can make better use of the extra SIRcon im getting from the puri node
my production
ignore first half, my scw capped 
I wish. I could then eliminate sandleaf powder excess from my ancient battery line
the sewage clog is real

Welp, guess I go do normal battery
Cant be bothered to go setup another scw battery line
wdym by .. "normal battery"
LCW
okay then
1600 one. I use that
sure thing
is the test zone recycler worth it at all? the effluent production seems pitiful
yesss
you always have a choice to ignore that extra 6~7 SIRcon
and probably 300 saving on your energy bill
i recycle everything and use that extra eff for a third hxira
i use that for the extra SIRcon
we have too much xira excess
cuz.. im not capping battery yet
i dont have xyranite excess.... if i see that thing close to capping i turn on my 500-cigarettes.. i meant 5000 component
I think I'm cooked chat
sewage from heto to make eff for 1 hxira, the inert recycle just enough for another 1.5 swc switch use the remain 60/m ori
the extra inert->eff from that go to another hxira
I will run out of protocol capacity before being able to pipe those sewage to purification node

@valid gazelle
help
guys, am i cooking or am i cooked?
what what
stash useless facilities
cooked
you'll be fine
gg.. LOL
you are grilled to medium rare. With a side of gravy and salad
you need 1 sewage for battery
too much sewage, one line worth of sewage is enough for 2 crucible
and 2 expanded or 4 crucible
Seriously is there any use for this? No subpac and the xor production is too low
that's worth 300 power
for now
i like it how my design looks weird comparing to yours.. even when i took yours as inpiration..
Only 300 and alot od piping involved
i dont use expanded one thats why
pipe is a mess with it
The expended doing double duty
i prefer aesthetic over compact
I prefer sanity over compact
yes 
Time to rebuit it vro
Imagine we get hc wuling bats next update
probably
we dont have much use for hxira
I wpnder if they will increase facility limit in wuling city
your double xira is beautiful though 

aight
got the balance down
looks good
I dunno why I made this, but if it helps someone here, you're welcome...
https://www.youtube.com/watch?v=O6hUFg5RZuE
Hetonite?
component? we only need a handful of them
I mean batteries are still the more important resource
H.Xira only has monetary value at this point...
At least we got a new Depot Node out of this update...
What to do with 1 million event currncy and an untrimmed medal?
Wait does the medal record the full amount of items made or just the num required to get it
my factory stopped because i hit cap on scw, had to take it out to protocol stash
wow
Just destroy them all
Or setup more thermal banks
If you can't sell them...
See how much power you can make
improvement ๐ฅ
now you're medium raw
my factory has been successfully spaghettified
im still doing the story before 1.25 
late reply, my bad
it was built with two in mind, I think there's a third
1 water output can do 4 machine that working 1 unit per 2 seconds right?
yep
i dont want to trash zfy again, but it's just the same story structure as laevatain 
There's some level of convergent evolution with that 60 xiranite/m tileable design.
I couldn't be bothered to save space
which 60 xyranite
will it turn to a crab soon?
there's too much space
Yours and mine, I sacrificed space to make mine symmetrical
Is there any 7x sky king xiranite that allows for a zip next to aic?
There's fruit one.
mine is symmetrical
well.. 80% of it
one water output can be use for 4 machines that making 1 units per 2 seconds right guys?
1 water per 2
i said yep already

oh i didnt notice. sorry xd
oh wait to clarify tho
1 pump can only support 2 facilities
but 1 pipe can support 2 pumps
forge forge forge
1 pump 2 machine
2 pump 1 pipe into 4 machine
Lmao i just woka up
good morning Fruit ~
it's real 
Hi hi
ah i see
XD
2 pumps = 4 facilities on 1 pipe
Im too dumb to remake the messy factory.
So just add 3 xir forge + 1 hxira
Ori just add to the lcw line
And add the copium to max produce syr A..
-_-)
Pipes being able to fit 2 pumps of throughput is such a curve ball when belts are stuck at 30/m
but that can tighten my builds so much
I need to tear down my whole wuling factory later cuz it's a mess after I spaghetti it for the event.
@restive wasp
harunachan wouldnt approve
all because of @subtle finch asking me how I was gonna fit 4 more forges
I made my 16x69 cuz funny

is there some tech for forcing a ratio of fluids to enter a building
Could I make it more compact? Yes.
Do I want to? Not really.
We have lots of extra space in this game.
like maybe with all the fluid mixing wizardry
I have a 26x40 triple xiranite that I copied from someone here. It's quite nice
that will have to be the most ancient tech of manual splitting
i have space left for another 2 forges and 1 heavy xira.
another tight space for 1 loop of sandleaf or jincao
but is there a way to ensure it still works even if one side has underproduction
ah i see, thx
On closer inspection, mine is approx 13x69 cuz the fluid output is accounted for when stacking design.
mine was designed based on aesthetics and compact in mind
do u want a specific ratio or just max possible into a building at any time
cus the former is impossible, and the latter is priority split
had to come to @dreamy jungle to employ the ancient snek ๐ slithering technique
Oh yea, let me try to find a pic of this mess of a design
Vi have u seen my new marker stone
no ?
Then lemme show u 
I can't believe I"m still burning orig even though event is over
the goal was to figure out how to make a single crucible setup for xircon that doesn't jam up the moment anything is low
i hate general questions like this, it usually points to attempting a less efficient approach
30x26 valley HC
I would like to see if anyone has a more compact design.
Guud enough ig.. -_-)
1 - hxira bottler
2 - hxira
3 - full heto
4 - 3x regular xira
this smells like half xircon reactor 
all stashless ofc
I can't believe I'm just using sane ratios
forbidden snek ๐ slithering technique
๐ฅ
The snaking is cursed cuz we can't mirror the things
This is like, pre space age Factorio workaround
btw can u believe that the entire top part uses only 1 depot loader
The possibilities are endless if we could only mirror things
here ?
yep
holy shite i had to squint so hard
interesting..
looks like there is still a bit more to the place? ๐ค
that there is a big boy

are all of the work at the same time or they take turn? all at the same time right?
ok this should be 0.875/min syringe c
Instead of producing syringes at such a low ratio, i recommend just producing it in bursts to save power
a lot of people like cutting the cardiac in half huh...
All at the same time one time
Do depo loaders get clogged
i had the basic prototype of that like 2hrs after they revealed the expanded reactors 
When things back up
regular crucible ๐ญ
I did the same shit lmao
pseudo sus crucibles
How are guys settings up your plants and handling sewage?
I am thinking:
2 lines sewage fed into expanded crucible for xircon production
Purifier to take 4 lines innert to feed forge for heavy xiranite 1
6 lines sewage to test area
Then sewage output from hetonite into extended crucible to create effluent for forge heavy xiranite2 - the innert will get sent to local purifier
Finally the output of the local purifier + test area treatment to be sent to crucible to produce leftover xircon - the sewage from here can also be send to test area or we can use an expanded crucible and add some water and xiranite so the sewage becomes self consumed
Is thus the way?
we have 3 puri nodes
i dont need power
I wish I had the protocol capacity to drag acid and effluent to main aic 
Until someone told me you can multi recipe the expansion crusible
FUCK ACID ๐ฃ๏ธ
even sewage alone almost screwed me over
im using
2 sewage from copium to the SIRcon
1 sewage from copium to the extra heavy xyranite line
5 to the puri node
- 1 from the hetonite
okay now where does the test area get the bottles
where those people at not wanting to share pump between mineral beds because of future high purity nodes

imagine having depot bus port at puri nodes
sure let me bottle stuff outside of pac

Doing that same, gonna do the last part tomorrow thought
how do I fit bottles in here
i share even with high lol
uhhh
You're pulling pipes from main anyway, just unbottle there

okay but there is literally no bottle
i always keep it at 3 per pump no more no less
idk where you're pulling bottles from
there is no sustained way to get back empty bottles
I have 1 extra pump for mining and it annoys me
Huh
just look at the beautiful scenery and no bottling
We're on different pages.
I was thinking about sewage from cardiac
random ahh sewage pipe ruining the scenery ๐ญ
yes i pull sewage from cardiac too
i did my test area piping without ruining the area
I just do a bunch of conduits
Why so much bottle talk
it stll looks nice
I'm enhancing the scenery
Anyone wanna rate this
ayo how did u get pipes over?
Cuz I'm not pulling a pipe from cardiac back to AIC
okay but what if im not using camera and just playing
well...
Okay cool similar
You're also using all the leftover treated effluent to produce leftover xircon?
ya
uhm.. that's.. not a concern......

the usual way? by pressing Q?
guh I don't really play with kbm in this game
what's the controller button for it?
idk look at your bar
I mean conduits exist
mid, you tried to save space that are unusable, better just have a regular pattern
Just use the teleport trick to make it easier
How much extra xircon are you getting?
With the extra 2 lines of origium looks like we can only generate an additional 1.5/m SC Bat as we need to metatransfer ferrium right?
How does one pump sewage to test area?
Conduits
That's a lot of conduits
This was the old one
yea, nothing

I used 5 conduits I think
anw i am absolutely LOOKING FORWARD to redesigning my core aic
yay ~
use yazhen for carbon not sandleaf
oh right there's my big water line for mining too
say goodbye to this piece of shit
Yea its a old build
cuprium refining
I use this nowadays @silent violet
Okay cool nice!
So burn extra dense origium until dead for 3/m, then once hoard is done go back to 1.5/m
it does save space.......in a way ?
you can...
but why
+10 power -100 sanity
wtf that's actually genius
dont do it 
oh god..
i think you should help pracyformerci instead
Doable - but only flop is your mining is now attached to your production - so if something clogs or you play with your factory the mining will go down with it
cus wuling is missing a pump for 1 low purity rn I think
I know the consequences
oh nvm it's 1 high
that's a risk
that's 1/3pump
a risk is not a consequnce if it doesnt evolve into one
Maybe use the purifier water for ecofarm since its not so critical?

what do you guys meta storage transfer if you dont need the feature?
we make a little over that
wont that clog the puri ?
This is insanity, and I'm all for it
I am not doing ts ๐ฅ
Yeah shit you're right
omg there's fake walls again
dw we have this thingy
Welp, that's surprisingly easy, although i still don't know where to use the effluent
so much stash smh
stash SUCKS
what is life without stashes
heaven
Do y'all just have pipes everywhere
wait do I need to make 14 SC to have enough water to mine with
the stash is the door to my fist
They should automate the ecofarm harvests so we can have definite rates and include it in production

if you dont wnt stashes how about depot bus
i feel threatened..
bussing
wait wait i have something too then
bussin ๐ฅ
alright everything collected again, minus readables cus idc about reading
both
bruh
ill use the aic as a depot loader

save 1 fac with converger 
no :>
i want symmetry
converger also count as fac?

diff limit from building limit right?
same
same
or is loader not building
loader building
building loader
I got hit with 512 at some point cuz I used too many filters.
Filters sadly makes I/O look nice but waste it

wait then converger counts toward building limit, not just logi limit?
yes
what the hecky
belt logistics count to fac limit
pipe logistics count to pipe logistics limit
okay shush i need to think of how to redesign this main aic
3 for zipline, 2 for buildings, 1 for pylon relay condults
okie
nigerooo 
i need a banger scw design that i can kinda mirror
fuck this shit
is there a way to get all the acid from the test area into wulling??, like, kilometers of pipes or something?

a waste of space though
i cri in a corner now..
where is the xircon ๐ญ
Did they add more facility capacity
are yall just making the xircon separate
some where else 
aaay
I make it beside my batteries


absolute gugugagah ~
graaaahhhh
FINALLY, IT WORKS ๐คฉ
bruh.
heres my xircon with hxira under it
+21 pipe usage
conduits unironically use less fac
here's my SIRcon with my SIRcon extra
I wish I had the pipe logistics cap for that
my mining is a mess so I wasted it all on that
optimal hydro just got way more annoying
this is how much I have to spare
just do normal rig for anything other than cuprium for less sanity usage
27
are your outposts full
sorta
I stashed everything i can stash in there
sfukhetti 
just to save on wuling city build limit
this is what i have left in wuling
my wuling is pretty empty
Should i use hydro mining rig or electric on originium?
hydro mining rig
saves 5 power per vein
unless you plan to share water between spots, electric
+3 facilities
Portable rig and manually grab them
I will grab you
more power saving if connecting low-purity
you have to connect wuling with qingbo for max savings now
but pump need 20 power xD
I'm not doing that shit
The purification is inherently bottlenecked by the pipe's 2/s flow rate 
Need beeg pipe
hmm, i might be a genius
has anyone found a use for the little trickle of xircon from the test area without unbalancing the entire factory 
25 power for 5 electric rig
20 power for 5 hydro rig
2+2/3 and 6+1/3
silver lining at least you can finalize qingbo pump setup ig, what changes is just pipes leading out of stockade
jingyu stays at 3.5
bottle it
3rd hxira line
current situation
since when did a trickle brick anything
trickle means free roundrobin merging doesn't even matter
i was told to ask AIC factory questions here
tell us
producing 1 clean xircon liquid need 30 sewage 
so what y'all suggest hydro or electric
Hydro.
okay it's time to start running the conduit back from test area.....
also...demn lazy connecting condults from testarea to pac 
5 power saved for 3 additional facilities
You can daisy chain the crucible, 2 pipe means 4 crucible worth since they flow at max rate of 2 liquid per second
maybe I should conduit a bit for mining too
no you can't run same recipe twice
you cant process same recipe in one crucible simultaneously, only different recipes
i see damn looks like i have to play geometry with these machines then. was hoping expanded could save space
is there a use for expanded crucible even then? just heavy xir?
I'm tempted to make a fully optimal base for the lolz
Expanded crucible compress multiple crucible processes into 1 device
It's not actually useful from what I can tell
Basically you saved 5 Crucible in xircon production, into 2 Expanded Crucible
Being optimal this patch isn't even that challenging
xircon,, and you can merge 1 normal crucible which make hetonite solution with one that make hetonite
idk "optimal" sounds horrible this time around cus you have to run test pipe there and back
The test pipe ain't that horrible to setup actually
oh I forgot to upgrade stonks
I just did it, it kinda did suck
1.4m for stonks smh
eh do it anyways ig
wtf
It's definitely for a future problem
hmm similar with mine, but using depot bus ๐ค
you just shove it back into whatever uses eff and save a trickle of xiranite
you stuck these in 1 expanded?
Currently the only bottleneck for the purification is the pipe, it can only do 2
k is this max or is there something else to upgrade that I forgot
no these 2
some do this you can ask others for their design
what do you mean by it can only do 2? the flow rate?
Ye the flow rate
i see
also for xircon these 2
lol I only have 10 friends with the new stock item
anyone has blueprints using them?
that in fact is not the bottleneck?? it's the amount of sewage we have
14 ๐

lol... i dont think this is getting completed
final resolvement
not sure about other but i only pick the highest which is 119k
pretty much yeah
?? are the splitters of use here?
It can cage the mobs, i heard it got patched, but i never tried it myself
i tried it, didnt work
I just did all 3 for the new places. Not sure if mine is getting done though.
i tried with other large buildings, and it got patched
the spl-splitt-splitters sp-splits xD
Why is my expanded crucible gets clogged every second? And the production of xircon effluent is slow
@valid plank this is my 240/m setup
not enough sewage?
bro didn't output inert
I output inert and xircon
bridges
unless you change after posting image, this is not connected
bro forgot pipe output
scheduled clog
this is mine
Now my xircon and inert stays 0. And there's no inert liquid coming out of the output going to the purification unit
using bridge pipe
a 1-wide pipe can be like that, just a visual bug
visual bug, this is fine
Just a visual glitch
ugh why does it disconnect at 220m
this is stupid
and it doesn't know how to take up slack

+20m already post buff 
Horrid
They stay at 0 because they are being taken somewhere to be used isn't that what you wanted ?
brain isnt braining
if only it calculates distance on a straight line 
Nah its the visual bug, cause it should at least appear 1 at any point. But stays 0.
lmao
finally got it smh
it can remain as 0, being produced and transported in same frame
it's still not full cus it's so slow 
1/10s eff, takes a while
what's your split of copper between heto and yazhen?
i dont do yahzen. full heto
basically the extra. im out of pipe logistics
If my cuprium gets full
My wuling factory will get clogged and batteries will stop producing
how can i get rid of excess cuprium?
gaming pipes
hetonite?
make it parts sell it
Use them
or make cuprium comps
no just raw curium
it clogs up my refineries, which clogs everything else
if my cuprium gets to 68,000
hmmm you're right
i meant use it to make hetonite
full hentonite parts right now has highest input to output ratio of stock bill output
I have one factory making this
But it uses cuprium ore
It's the cuprium itself which clogs
this is a bunch of spaghett
hentonite is made from cuprium , just dump cuprium for hento no?
then i assumed you are not running 100% hetonite
btw do y'all doesn't care appearance or overall look of AIC?
i do care
depends
Yes
sometimes i just need to fit things where they can
is there a way to bring back liquid xiranite to it's original form?
no
turn liquid xira into effluent and feed into something that uses it thats already max efficiency
can you show a picture on how you produce Hetonite actually
The blue print I use seems to need to use cuprium ore > refinery > produces liquids > that's used for heavy xiranite etc
i gotchu
splitting ratio is a headache, so i chose simplicity
i have too much scw in stock anyway
i had 50 extra xirinite and 1 extra forge...what im gonna do with it?
cuprium > shredding > crucible > purification> crucible
split half/half
do 120 heto and 120 yz
yazhen is 1.1 bills per base ore
hento is slightly higher at 1.15 iirc
the power defecit is only worth if ur burning HC valley4 batts
i use .5/s sewage from hetonite to make eff for hxira
make another xiranite then make gear components
you're forgetting if you do half/half you get 15/m ferrium back
if you xfer ferrium (+25/m) you get enough for one port yz C
yes it has this
Is... Is this good?
If it is working fine.. Its good.. ยฐ-ยฐ)b
It's perfectly fine, I think
more pipes pls
how is your yields so high!!
yea but i have a bugged metatransfer so im tryna exploit is as much as possible
just max out ur resources
mine
wait a min
so you can put reactor crucible outside zone
ur getting the xircon back from test site?
I'm only dumping sewage
its the bug lmao
I think I'm not maxed because I'm not wuling level 14
wait till you see the really op ones
bruh
yes, and i recycle all inert i produced
ive still got my floating sandleaf planters above my facotry lol
also the inert sideproduct from eff for hxira gives just enough eff for 1.5scw, which use the extra 60/m ori
you can put anything not connected by belt outside the aic
water treatment conduit fluid tank crucible purification unit etc.
ye but ur using more ferrium then no?
how much
I have 15 left over from doing half heto + 25 xfer = 40
30 is going toward yaz C
should I ditch yaz C
i do ferrium metatransfer instead of dense ori powder
ye that's what I'm doing
xfer ferrium
but I'm using it toward yaz C, not xircon
should I ditch yaz C?
are there new ferrium veins in the test area?
no new ferrium node
You can turn off medC. Let it pile up till almost max depot.
Then run 6/m or 3/m.
Saving energy/battery.
Thats what I do.
Good enough 
I'm trying to finish my setup here, but can't quite place the last pipes, what is supposed to be my output?
Ig ill just max out part
my med C and A are one unit
Same with me.. 1 unit.
i dont see any problems here, whats this last pipe youre referring to
I finally made it back to aic 
is there any mine that increase in purity level?
yes
hmm...
inert?
how tf did you get dark mode
im currently metastoraging the experimental jade parts lmao the devs didnt fix the metastorage bug kek
need to buy that whel pack ๐ฃ๏ธ
oof i missed fun thing to abuse for giggles
youre wasting metatransfer though
and tf you mean you need to whale for darkmode ui?
dude it gets taxed isntantly from my invetory but its funny as hell to show off
nah i just got the image from game files and asked chatgpt to night mode it and then replaced the in game image
it was surprisingly easy
ah
I have 370+ eff from the wall, I wonder how long this will take to drain
i swear bros gonna get banned one day
probably
what im guessing is you are distributing water unevenly, so some crucibles are not running at full speed
ive got so many bugged things in my world its insane lol
looks deadlocked cus you clogged puri at some point
I need to know what is the output on the yellow outlets on the middle crucibles
yours has pipes there but they're empty

nothing, that setup only output inert
oh nice I didn't brick my factory yet
Is there a way to use one expended crucible to go from Xiranite to Xircon if only one of them ? or do I have to use 2 step at least ?
I have issue with sewage that clog it, but if I set a Sewage output, it don't work anymore
this is my setup which is similar as yours
you may have a bottleneck somewhere else
@jolly shore you need to pull out some sewage, bcuz your formula need to create sewage
Can do everything in one but because it can only do one xiranite->xircon line at a time it's half speed
Mine.
ok, so better to do 2 expanded crucible for Efluent and go to another crucible for xircon ๐ค
you can do with just 2 expaned crucibles
am i tweaking or are expanededs useless and just use more energy
*the cursed 1 exp cru.. ||dont do it||
not useless
2 crucible merged
saves space
You can run 2 formula in a single expanded
no if you use them to do more than one recipe
If they do the work of 2+ crucible, it's more space effcient
.....there's so much excess xiranite
3
Eh yah 3
isn't this enough to run another forge on heavy smh
Yess.. 3 heavy xir.. ยฐ-ยฐ)b
thanks, here's hoping it doesn't get clogged while I sleep
i m running 3 hxira
why does it keep lagging? is this a factory issue or a device issue
I still don't want to deal with >12SC though
seems like a device issue
what can i even for a ps5
I think its internet, it happen to me sometimes when i was on mobile data
you chose ps5, live with it 
Mine.. XD
you know what, possibly true. i frequently get visual glitches where sections of pipe and tracks just go invisible but the products go through just fine
I mean, able to do this recipe for 100 seems like a steal imo
This is with conduiting sewage to test area?
Nop.. Havent work on it..
Lazy..
Meta dense + making dense from new 60 orig.
When depot almost full, start making lcw again. Turn to 2 hxira - 10 xir forge (rn 3 hxira - 9 xir).
im genuinely confused how people look at this
and call the expanded crucible "useless"
XD
they dont probably
literally no difference 
Am i dumb or pumping sewage into purification node is inefficient than doing same loop in factory area ?
you are dumb
the purification node serves as a waste processing unit.. because your leftover sewage has no where to go
so this is just to.. at least get something back albeit its small
and you save probably 300 power
With the cost of facility placement count.
(Since ur dragging conduit back and forth)
again.. you have the choice of choosing not to but so far i dont see anything in the game being useless
Man, this facility limit is killing me
the inert xircon from the 2nd hxira alone is enough for 1.5 sc using the new orig right?
no need to get the one from test area back?
Its just.. Minmaxing stuffs..
Generally, as long as u can empty the bills..
All is good..
someone explain what I'm doing cus idk wtf I'm doing
you can get it back for 3rd 
yes I'm doing 13.5m bat
Is there a sandleaf version for wuling or do I still have to use sandleaf?
Well.. As long as its working fine.. Its good.
Just ignore the rest.. XD
Though I'm not using inert from that xircon for heavy
I'm trying to dump my wall eff so it hits steadystate
yahzen/jincao for carbon
sandleaf
missing one thing to use sandleaf on
Just realized that yazhen produce carbon more efficient so i have to replace all my bucket flower. Rebuilding my whole aic core
Life is good
what's the new total value for half heto again
omg so many test area 106k 
ok this should be the max possible stock bills/min
now to figure out how much I can cut back while making some components
time to ditch wuling ig
cuz I'm p sure this is beyond overkill
wuling is 119k though 
for 15 sc wuling you had to cut down on hetonite ? how much cuprium allocated for that ? and what are you meta transferring ?
*me who just utilize shared zips..
Its already filled the whole map of test area.
is there like, an early-game wuling aic setups that u can possibly do ;;
its not very clean but its somethng
it's 14.75/min effective, by metatransferring dense originium powder you get a 25/min line of that, so with that, the 2 new originium lines and 1 xiranite line, you can make half efficiency SC batteries (14.75/min effective but I got a dense powder stockpile that's burning)
does anyone have marker lvl 3 yet
let me grab the clumsy setup I did
Maybe search manually one by one..
Xiranite blueprint.
Like lcw battery blurprint.
Syringe C blueprint.
Like that.
ok ok thank uu
while jingyu lvl3 + marker lvl2 is 46k/hr
and that's with zhuang + tangtang for liaison
so we def can slack a lot for comps
by making half efficiency hetonite parts, you leave exactly half of a ferrium line to do this
and you use the rest of the cuprium for yazhen A
the expanded crucible is goated for this cuz it's doing 3 recipes at once LMAO
- xiranite + water = liquid xiranite
- liquid xiranite + sewage = xircon effluent
- xircon effluent + ferrium powder = xircon
again, you need to metastorage transfer dense originium powder for this to really work
random zips I haven't taken down while experimenting still
and if you recycle your inert effluent, you should have exactly one bonus xiranite line to do this
I am THIS close to turning Fangyi into a human sacrifice if there's not another Ferrium source
am I doing this correctly
so real, 90/min ferrium is bricking my ass so hard
if this was 105/min there would be zero issues
but now I had to make this mess
did anyone use this for factory yet?
Me needing just half a vein of Ferrium
With level 14 regional you can feed up to 240/sec of sewage into this without bricking battery production
which gives you 2/3rds of a pipe needed for a Heavy Xiranite line
it doesn't really matter tho since we're bottlenecked on Ferrium
do we even have that much sewage
eventually your originium is going to go dry by 5/min since this is using 60/min instead of 55/min
What's the difference in bringing output mats to protocol stash vs the PAC directly and using the depot loader. Aren't they just the same?
you can put the protocol stash anywhere
same
as long as its powered and you have space to put it
oh time to deliver xiranite 
anyone know how many bill marker stone outpost generate per hours at lvl 3?
sry I meant 240
might cause issues with the other battery production but technically it would even out but it would clog sewage slowing cup a bit
cause i noticed on other blueprints that they put belts into the PAC, why not just use protocol stash
power
a stash denier, or its more compact that way
early wuling while waiting to upgrade outpost :
- import +- 10k hc battery from v4
- mass produce xiranite
- mass produce originium cube
- combine them into lc battery
- produce yazhen c
- produce cuprium part
after unlocking sc battery at 1st outpost, switch to sc battery , heavy xiranite and hetonite parts
Why is it not growing im using it with and without water yet it isnt growing
power saving, space saving
Guys im using all core aic space to buid 300/m xiranite, 12 scw/m is this bad, can i still build enough stuff with leftover space ?
each way has its own reasons
bruh thank god you edited that, I was so confused where you were getting all that sewage from
oh wait we make enough to stop delivering now or nah?
this is standard for everyone
unless you want to put in some extra work for a few more scw
Ahh thank you
You need to garden it yourself
That one must use farm area.
Iirc.
Bruh
that's going to depend on how much leftover space you have
my main AIC area is both a disorganized mess and also relatively compact to the point I'm kinda proud of it
rare plant cannot be growth using seed / planter factory unit.
only growth in designated farm area
craft the seed with carbon to make plot and plant those plots.
I was hoping to use it as an effluent dump
effluent is money
why would you dump effluent..
because somehow I make too much







