#aic-factory
1 messages · Page 349 of 1
Is there anyway to expose the black residue liquid
I mean i use my v1.0 pipelinr from Jingyu to Wuling just to transfer sewage 
+1 technically free via 12/min SC bat
and who knows how much we're getting through that sewage to effluent conversion
We haven't reached HC bat too
pov you dont have enough power for water treatment so you pull this move
HC isn't a concern in this patch at least
they would've advertised it in 1.2 stream if we were getting them
......
wonder when will be my turn to have 0 sanity in this game....
what are the fascilities that you're able to place outside of the core AIC area?
Just...wondering
ones that only use pumps
everything, as long as they are not using belt for input and output.
YE
basically anything as long as what you're doing with it has nothing to do with belts
yes, the purifiation unit can work that way
are the new gears worth it for Laev?
ty
but the problem is when you are making bp, they cannot be included into bp or you cannot place the bp with partial outside AIC area
I kinda... don't want to make heavy xiranite
#team-build tbh
that's the chat to ask at
Sadly people don't really know much about the current state of builds
not yet at least
I am still using the old set on her myself
where is this in the markerstone area?
i need hg to remove that 512 building capacity
dang
aight, thx
yeaaah
i honestly could fit everything in the pac area
I read that this was outdated?
Potentially?
it's not, it's in Test Area, which will only drop on mid-may
very lol, at least with the redeemer out
but they just changed 1 gear only 
nope, not in this version, wait after fang yi banner over, then we'll get that new map
Honestly I've not looked into the builds yet
99% of my sanity went into leveling the chars themselves as opposed to gearing them
Mostly to avoid artificing gear I will replace in 1.x
doesn't her banner last the whole patch? and that we'd get new map mid-patch
bro, I'm ttyping the fahhh, but the double gg censors it 
i just put some support 4p, get a level in ult gain for supports
And min-maxed signature sets for the chars I got like Lavei and Yvonne [soon Fangyi]
Cost effective
FAHHHH
almost, not sure how long re-run banner last
.roadmap
does the bot have charcters builds?
or is it just the overview for the games events+ showcasing your account or something
oh so her banner does end mid-patch
with so many equipments, i'm just using whatever gear they use at character introduction training area.
too many choices plus upgrading them can be a headache....
ngl the true patch countdown is the pass lol
That's a poor way to go about it I think
shall we move to #team-build ?
Let people go on with AIC here while we can go over builds
4/1 ratio again
Hm?
Isn't it 2:1
Or do you need 2 water 1..forgot what it's called

But yeah it is still good to know
i'm not a minmax type of person : /
you will need somebody else to discuss about gear.
haven't tinkering around about weight prioritizing primary stat or the 3rd stat which provide attack boost / ultimate gain / skill boost.
only 1 thing for sure, upgrading weapon essence provide permanent staying power, at least for now, more RNG but less head ache for future.
1 = 2s per crucible
4 = 2s per puri
I mean it's one thing to min-max a whole other to find a build suitable for casual...well whatever deosn't matter
100% valid
just look up an image online and copy the gear off that ig
for efficient purification output, you need 2 purification unit, its output then combined via converger before being fed into something.
2 sides of endfield players:
- Ocarina/Genshin player
- Factorio player
I am the first
at least the current purification unit.... in case we get another better purification, just like the crucible
why people saying its 4 crucibles per 1 purification unit?
Cuz u do
1 crucible is 0.5/1s
Purification unit needs 2/1s
Simple maths
that is for model with converger at purification input.
haven't tried it to cehck actually, don't think it is safe.
if it worked, will safe 50 energy
....I guess that's the best that can be done for now
Unless I killed Yazhens altogether just to get that lil bit more Hetonites
New stuff is so slow man
Why the hell is reactor crucible so slow
Wait...pipes can go over depot busses?
yes
Yes
well damn lmao
the normal height is still taller then depot bus
weird but yeah. the columns shouldve stood at the top of the depot bus
Does anyone have a decent build for a size 3 main PAC, size-2 valley sub-PAC, and size 1 for the other two? I'm currently making a few things, but I feel stuck, and touching anything feels dangerous.
.... you need to explain about what representing size 3, size 2, size 1 .....
The size upgrades
owh... wait, that's.... tiresome to keep bp for multiple size AIC upgrade state
I thought reactors can only process one at a time like regular facilities. Won't feeding two powders into a reactor just get it backed up?
just upgrade sizes to max man
then you can get any bp
use temporary setups to get enough bills
one powder is being passed through to the reactor behind it
I need a few more days for that for the bills. :(
At least I have distribution maxed, depots almost maxed, recycling maxed.
Kinda hate how we didn't get enough cuprium to run the new parts at full speed
Is there another update soon?
Currently I'm basically just making origocrusts, Beta capsules, and ferrium parts.
is it possible to achieve 12 heavy xiranite and 12 batteries production? (I still have one extra forge, i do not know where to use it)
There are at min 4 extra nodes in the new area
That opens later
next month
Not right now
hopefully that does it
May 14th when we get the +4 forges
that sucks, guess ill use that extra xiranite gears them
Then we can
I see
we gettin there
The new mortars are so funny
We just need a orbital strike tower. 
I wish we could've placed them closer together though
final patch will allow to rain main pacs on enemies
I just did the lvl 2 auto-defence for the science park with 10 heavy turrets, and man, it was a bit sketch.
The scorpions in the Southeast just barely all got killed.
is this how to plumb and crucible?
hey, im stuck at region lvl 11, any idea how to increase to lvl 12 ??
I full upgraded all subpac + main, upgrade the new store
the photo
there is a new environment thingy
I did too
depot node?
there is a new depot node ???
just upgrade lv
final patch is Gundam's colony drop....
I thuibk its photo, bcz im a 3/4
I HAVE DONE IT
also this
We are going to have gustav cannon in the future?!
finnaly... sewage less battery
what is the xircon yield btw
Will we get a summon type tower? Might be good for afk farm 
ok thyx, itwas depot node
waiting till the game allow what the endmin done during prolouge
Do yall really like the factory.. like really really like..
finally managed to update wulling AIC to almost max efficiency 
Bcs idk what im doing
spotted unused ferrium
not that hardcore micro setup, but yeah
it's enjoyable, just like a permanent puzzle rather 1 time puzzle for map exploration.
Can smn do mine..😭 i dont get this at all
copy someone's full base
i said almost 😄 It can be used to produce Jincao Drink but with 15 per min it roughly give half Jincao Drink per minute 😄
But i domt know what level i could copy or where to start..
https://www.youtube.com/watch?v=y2xuoY4kJa8 ended up using this guide to go from 1.0 to 1.2 max efficiency factory
#ArknightsEndfield #EndfieldCreators #springwake
💬 Discord: https://discord.gg/fxDgmSJ7vG
🐦 X: https://x.com/ItsPaik
Full guide for the optimized 1.2 factory in Arknights Endfield.
I show you how to place the blueprints step by step to easily produce hetonite, xiranite, cuprium, xircon, batteries, and disks.
Copy the blueprints from the...
Oo
lets start by what level are your account? and RDm level?
47? I think
i never relied on some blueprints at all. and that gave me the fun and really like AIC gameplay, since i poured out a lot of time to understand everything
48
press esc to show the overall menu, bottom left is your account level
Its so confusing because i get lost on the most basic names
how about regional development level?
This?
https://www.youtube.com/watch?v=y2xuoY4kJa8 Follow this guide , but before doing so make around 500 cuprium parts to be able to craft some of the needed things
#ArknightsEndfield #EndfieldCreators #springwake
💬 Discord: https://discord.gg/fxDgmSJ7vG
🐦 X: https://x.com/ItsPaik
Full guide for the optimized 1.2 factory in Arknights Endfield.
I show you how to place the blueprints step by step to easily produce hetonite, xiranite, cuprium, xircon, batteries, and disks.
Copy the blueprints from the...
Cuprium parts..?
probably find bp for SC valley 4 battery and medical [B]
These?
oh nvm you are in valley 4 , sorry dont mind me
just playing around but does anyone have ideas for how i can give this line more waste without clogging up the xircon crucible
Well i have the water area too
the outlets come from 2 hetonite lines
But i wanna get 5 star artifacts
ignore that video, its on another region
unless i just make another hetonite line or smth
your progress not reaching that far yet

even one full hetonite line atm is kinda impossible
well not a max capacity one but like
have you unlock sandleaf?
No.
this is what mine look like rn
Idk what that is..
try to find bp for SC valley 4 battery and any medical [B] item for under account lvl 32 in #1461542035617091681
you haven't cleared 1.2 story yet?
Idk what any of this means.
i have
a plant that unlocked in Power Plateau Valley 4 before battle againts a boss
use the expanded crucible then, not the reactor one
do you skip early tutorial for factory part?
why? I don't think i've got any reactions here that warrant needing the expanded one
Well no. But i did it in January..
RHIS THING IS SO CONFUSING BRUH
go to simulation section in game to refresh some memory of it
How long will this take
i'm trying to use this line to make heavy xiranite primarily but also use the leftover xircon effluent to make xircon
just so i don't clog
at least full hetonite line is useless 😄 basically you need 150 per character and only few chars need new gear, you can always upgrade it with old gear and in most of cases there is better alternative in old gear.
depending on how fast you will understand
why are you outputting the sewage?
So how long would u think itd take to master the factory.. because i wanna skip monday this week.
1 day is enough, if you just follow the turorial and learn to tweak blueprint at least for valley 4 region
K. Do u recommend any videos
just in game simulation, learn by doing
press t for the tech tree thing then on top bar, there is simulation button
is this the most advanced fomular we can run in a crucible atm?
pretty much
yeah i think, hadn't tweak mine because the power consumption not that much different
formula aint advanced, its just the 3 reactions at a time that is great
i wished the reactor crucible was faster
good enough for update?
the other one is on heronite component, pretty much similar
liquid heavy xir is just jeavy xir + water right?
you don't meta transfer dense ori?
wait you need more than water for it?
for?
K ty
xiranite comp, you steal from sc bat right
yeah they pretty much explain everything in there as a basic how-to
no? unless u using for making battery
with that production idk if you can keep up with outpost bills generation
yeah i still can
how much SC are you spending for power
do the in game AIC tutorial.
then slowly start implementing them.
start from simple things like refining originium, making amethyst part, ferrium part.
then do moderate ones like steel part , buck c, citrome c, LC batteries once you get access for depot, plantation / seeder, and protocol stash.
then do advance ones like HC batteries, buck a , citrome a.
3 bank
i mean other turret also 3 bank is good enough,
so you are producing only 8 SC and using 3 for banks?
yea
what items are you selling in the outposts? only SC + HEAVY + Yazhen A?
heavy xira
3 banks using lc bat?
no, it is 2 xiranite + 1 xircon liquid, which require 1 xiranite on its own.
this correct?

can you even survive with this
i need 3 input crucibles ( water, sewage, recycled xircon)
did you make lc bat
Hey, so I tried to connect a inlet manifold collecting xircon effluent and connected it to a normal in conduit outlet and it's dispensing water??
Uhuh…
oh wait, liquid heavy xiranite, it is heavy xiranite + acid in crucible, no waste produced.
What machine do i use to get rid of excess precipitation acid?
are we able to meta transfer liquids?
liquids are not a thing in the valley sooo
mhm maybe, right now i'm all in for making gear. Only 1 machine for 6 sc/mins. And other 2 machine runing like 2-3sc/mins from this
usually it is connected to wrong conduit
no meta transfer available for wuling yet.
maybe we will be able to do it, via bottled liquid
stick with 12 SC because thats the only way to catch up with the outpost bills
Future proofed my parts setup

best usage of purifying unit, is to take the inert product from your 12 SC line. its exactly the amount needed to purify it into a xircon effluent for a heavy xiranite forge
ho hum that could be made obsolete if we get a more efficient powder recipe
*Future proofed for patch 1.2
in general if you sell the majority of SC wuling and heavy xiranite then sell 1 more other item at each outpost it should be enough
i mean i can run that but have to turn off other gear machine
My HXira is now 100% a byproduct of Xircon production
you still need 2 xiranite lines to the hxira forge
taking to haruchan's design for hetonite
Now I get surplus Xiranite
calm down.
you are overfed by other people design and showcase.
or rushed by catching up to latest story.
rate my 7-8 forge of the sky base
I just want the new girl 20 pity away from hardpity👅
uhh good luck on the rng, hard pity ( 120 ) always a pain.
hope you won't forced to reach 120....
where's the wuling planter+seeder?
last rite at 80th ?
sandleaf for carbon 💀
4 forge come with it, 2 need carbon transfer and last 2 stabilized carbon. But i can change it into 6 forge with seeder have to move other 2
i prefer's fruit's 7 xiranite forges in 1 subaic
becuase it includes everything inside of it
thoughts? I cleaned up the pipes as much as possible. no flow issues.
#1494206812147417188 message this one
You can clean the top piping further afaik. Flow is 2/s even when passing through crucibles so just feed 1 crucible to the next.
i mean i built it in tangtang aic arent fit enough all of it

it works in the outpost aic
yeah that 7 forge is in jingyu outpost

where are those 2 plant to 2 shredder came from?
are pipes counted separately from buildings in terms of fac count in wuling?
Did you guys make all the variants of bottle?
Except cryston, yes. 
i tried that at first but ran into problems. splitting it off half way fixed the flow.
Hmm weird, my flow's been perfect
i'm eager to do all the variants of experimental bottle
i'll cryston everything soon™
i'll try it again and see if it still does it
Sometimes it bugs out
I had like a few iterations of piping where it was just not flowing properly. Only deleting and replacing the crucibles/pipes fixed things
Wish we able to use acid jet spray though
It's done, I'm now making 12/min sc batt, 4.5/min parts, 6/min HXira as a byproduct of 12/min Xircon production and it's all modular to produce a few comps of all types by just flicking a switch off
not in 512
I love that making Hxira technically only costs 60/min Xira if u do it right
Not wasting the inert effluent is huge
W purification unit just let us swap the output ports pls
tbh i'm giving it some extra xir anyways so i can keep xircon at cap
I might wanna use separation unit for xircon inert just to use as purification 
I might use the last 30 xiranite to make a suboptimal HXira setup
huh? u can make carbon from yazhen? 
Split the 30 into 3 parts lmao
yup it's why i asked where the wuling plants are at
it would be wise to do so so that you can make jade gourds later
But wait can’t do that
I have a lot of excess HXira alr
It’s not making anything
Is this your first time experience it? 
meh it hidden, dont show for me like only show those?
imagine not using wuling plants since 1.0
when i try put it it add in my database
I have like 5.5/min HXira accounting for making comps
lmao
it's teh same with bottled liquids need to do it once to unlock the formulas
welp im rebuilt
Buckflower, citronflower, sandleaf, wood, yazhen, jincao being refined turn into carbon

Using only 4 super crucibles, 1 purification and 1 forge to make 12 Xircon and 6 HXira is so good
the whole carbon thing makes me wonder why we can't combine ferrium powder with carbon power in the grinder to make steel
Damn simple to setup too
Only issue is that it consumes so little sewage
Wasted like 300 power on treatment units
you know why, sandleaf won't allow it
does anyone have a factory focused on making only xiranite components + clearing the outposts for money? there isn't any reason to not artifice using the xiranite pieces since they are the cheapest
Well some of the cuprium comps are good matches too
And they’ll release good match heto comps mid patch I think
Well, cuprium powder + sandleaf powder into grinder is...
good match is rng anyways, it only matters for upgrading the nonset cuprium pieces since they have higher stats compared to xiranite only
Better rng is super helpful when u are limited weekly by catalysts
you can still hit pity using good matches
good match
goes 12/12
But it’s quite simple to do what u want
Time to nuke all my Wuling factories and start over
i'm waiting the day a battery recipe just being made by sandleaf alone....
do I have to forgo heavy xiranite production?
No it’ll affect battery
You can do it yourself tbh
On a single line of the dense og powder
Just split it 1/6
Then feed it into a refining unit 2 times then send to depot
changed it back. seems to be working now! 👍
Make sure your depot is empty of the triangle originium
Then make a 1 to 1 setup of xiranite to og somewhere into a gearing unit
The packed og triangle will regulate your component production
Furthermore if u set a switch on the belt for splitting off dense og powder
You can toggle production of components on and off
I’ve done this for all my setups
Of all component types
Eats a little into my max profit but I can consistently buy out outpost so not a big deal
suffering from success
Make some more batts goddamn
Bro u still lose more income than just doing 2 sc thermal banks at 6.6k lmao
Ain’t no way it’s economical
I think capping out a specific production is worse
1sc 1lc is better assuming you are still making 12/min sc batt
But ill do u even better, 1 scw + 1hcv for 4.5k power
purification unit is such a useful machine once you have 4 crucibles making inert xircon effulent
you get a whole 0.5u of normal xircon effulent back
you can use 60/min if im not wrong
That’s cos it’s job is to be used to make HXira for cheaper
Instead of the 90 xira
Plug your HXira into zircon production
thinking I should just run 2 sc banks at full to keep stock down atp
Then it only cost 60 xira
how much of this can i make per min
i love the aic factory
4.5
should i be selling it or just throw it into the components for gear
components
make like 1k components then just sell them after

im making 12 sc and 6 lc rn
Thats not sustainable
yes the originium is unsustainable but it lasts like 12 hours anyway

So begins the suffering
Are u meta-ing dense orig at least
can i sell sc wuling batteries in this new outpost at higher levels
bruh..
And my calc for het parts: 6 cup -> 6 cup sol -> 1.5 het sol -> 0.75 het -> 0.15 het part
So what is everyone doing with the extra xiranite/forge?
stocking up for xir event
what if already cap
for 12sc it should be 60 xircon usage
Uhh
- Store some excess in V4.
- Bring xircon to cap
good poiint about moving some to v4
dynamic heavy-normal usage
making lc batt and selling raw
again im burning stockpiles of the stuff
i turned off my xircon line but it’s still 60 for whatever reason
oh that is a fun idea
Are you all short on originium from making that?
nevermind then, on first screen it was barelly 30/min
hold on, 4.5 of this and how many sc wuling batteries?
12
you only need to watch for heavy, since it depletes the xiranite faster
also, is this fully automated forever, or it will slow down once you empty stockpiles, or you transfering stuff from valley?
Is this assuming +1 heavy comes from the xircon production leftover?
do you mean 4.5 parts or 4.5 components
i will turn stuff back on like normal in idk 12 hours
i just wanted to be sure
approximately when the stockpiles run out
you asked abt parts so
yea
comp is half of that
bro 😭
yeah, the +1 using the inert from 12SC prod
heavy xir uses 30/m effluent right
i was like thats a bit low so i wanted to clarify
Can someone tell me what’s wrong
damn so i should just chuck all my cuprium at this mf
effluent line not active
it does, so it takes 3 xiranite
What is that?
heavy xiranite is effluent and xiranite
you have no effluent right now
How do I make that?
??
Gotcha my last 30 is tied up in various comp production so I’ll make a 2nd HXira line once I’m ok on comps
did you copy a blueprint
I fear I made it myself that’s why it sucks 
The useful byproducts feels tricky to find a way to recycle. Like that inert xircon, byproducts fusing into one additional output.
I will nvr be ok on comps
asking becouse i was playing with idea to do some more lc/sc too but im too lazy to play with switches, so i wanted to send some originium dense powder from valley to make use of xeranite after i stockpile components so it will be fully automated without any need to do something with switches
Still finding a way to reuse efficiently
Inert actually quite simple and very useful for making HXira
you get it from sewage + liq xir or purifying inert
did you set the liquid output from each crucibles ?
Can spend 2 line instead of 3 line xira
I don’t know I’m sorry
Is that the pipe on reactor crucible
the crucible you're using to make effluent isn't getting any sewage
i'm guess the most bottom one is the starting one.
there should be xiranite input and water, become liquid xiranite.
then the liquid xiranite become input fro next crucible with sewage, then you set this one xircon liquid as input toward that forge....
either the xiranite input is not there yet or no sewage input available
I’m too lazy to adjust midpatch so my heto part setup is 240/min instead of being balanced
The expanded crucible kinda sucks, when there is still only 2 pipes input & output.
Imma let it self regulate
Wait so this doesn’t work?
only reason to use expanded is if you want to do several recipes at once
Not like the cuprium is making anything else (I tied cuprium comp production to the initial refining)
Maybe could find a way to combine xiranite liquid + xircon effluent production.
Cuz that needed 6 slots, and old version is only 5 slots
looking at that other screenshot you've got it isn't recognizing the sewage
WAIT MY REFINING WASNT ON SO IT DID NOT MAKE SEWAGE IM SORRY
@calm scarab Wdym? U can do 12Xircon with only 4 enhanced crucibles
it is working, but the next crucible does not receive any sewage input.
sewage + liquid xiranite will produce liquid xircon and xircon waste.
liquid xircon for heavy xiranite, xircon waste to water treatment or purification unit into liquid xircon if you want some backfeed stuff
Need 3 output pipes for xiranite liquid, Xircon eff & inert xircon eff
Wait why need an out for xira liquid? That never leaves the system
This isn’t making heavy xianrite
The xiranite liquid that is produced can be internally processed? Like just input water + sewage?
Yeah? Why do u need it to be outputted to anywhere?
you can use the same liquid you produced in the internal storage to make another liquid
Oh nice. I was just thinking out loud in here.
Never thought of that
Lemme drop my setup its ugly but its fully efficient
that is xircon liquid right ? not xiranite liquid.....
Its supposed to be xircon effluent
xircon liquid is xircon effluent or something....
why do you want to do 120/m xircon
Oh lmao I mean 12SC
It says effluent so do I connect the pipe to water treatment into the thing instead?
yeah nvm 12sc uses 4 expanded still
Finally got 7 xira lines in the sub aic,but I had to cheat and pull 2 sandleaf lines from elsewhere
this is set up correctly
you’re just not making effluent for whatever reason
check all inputs
Every day I come home and my expanded crucibles have clogged themselves up 😡
This never happened with the basic chains. It's the sewage.
that picture is correct, assuming xircon effluent from crucible to forge.
Unless.... heavy xiranite require AIC research ( i forgot if it does require research )
I used the blueprint 😭
double check your pipe outputs on the crucible
you did something wrong then
click the crucible, screenshot the detail
is there an alternative to filling unit to transfer sewage to other map?
looping sewage in the prod lines is a trap
what are you making
Runs fine all day while I'm on. Only clogs when I'm offline. 
why is usage ending in 8 for this btw?
need sewage on the second crucible
Life. Im enjoying the AIC for these sandbox-like elements.
also uhh make sure you're putting in xiranite and not heavy xiranite
where is the sewage input for 2nd crucible ?
the 1st crucible, water is not to be set as output unless you converge water input before
oh hmm you are
ohh, im using the 8.3333 xiranite for extra LC with dense ori meta transfer
Okay!
However it’s doing this so I’m a bit confused
empty the xiranite
Here's my Xircon + HXira setup
delete the forge and place it again, to delete whatever liquid in that
this is without LC
and see if it still doesn't work
oic
....Have u unlocked the recipe? In the skill tree?
The purification facility could use some improvement, why acid & that hetonite solution have to come out at specifically those two points instead of flexibility like the crucible?
I did the main quest I think
next survey I'm gonna put in option to swap purification outputs
Like the T button
this in tech tree
Did u unlock everything
I think he doesnt have that upgrade lmao
Turns out I have not 
BROTHER
holy
Its ruining the setup flexibility
STOP I DIDNT REALIZE
current way requires too many bridges

Like, observe this setup of immense beauty
even then a sewage clog shouldn’t affect anything?
this runs just fine
pur facility can't merge the pipes like the crucibles do
yah if I could swap this wouldn't need the bridge
sewage clog affects xircon prod cause it makes sewage
no place for sewage = no xircon making
Is it viable to make cuprium components in the current economy 
Oh you're only doing two steps in one. I've got all 3 like in the tutorial.
(Ignore the sewage output, I have that set up so I can "tap" it to a silo to restart the thing).
you can do it if you're cool with 3 het parts a minute
I'm currently doing 3 het/min and stocking up raw hetonite tbh
how to set the sewage flow to exactly 0.5unit/s? i only use 1 xiranite for xircon so it produces 0.5unit/s sewage
but if i use water treatment it will drain all the sewage
1k het comps more than enough for any gear I'd need to make with it
Cuprium production too. Inventory capped, stops producing cuprium AND sewage. Sewage production also rips like that, experienced it this morning.
true but in perfect world expanded crucible making xircon recycles its own sewage and you don't input any into it
well when sewage first exits what makes it you get 0.5 sewage
and so cups go to other reactors or waste

let me get this straight
Buying out all the weekly catalysts cost 14.4M bills
but the outpost only generates 7.7M bills per week
which means you need to earn 6.3M in stocks, deliveries, and environment monitoring 
Still thinking how to recycle 😂. Currently no time to dedicate to thinking about it.
it doesn’t
really
as long as the output is not clogged it won’t affect much
th only sewage clog you should worry about is the one from cupirum
you're good on sewage clog as long as you don't loop
wonder if there's a wiki page featuring this tech tree for simple information when not in game
So many extra recyclable byproducts, trying to find a way to close that loop completely.
eliminate most of them
it’ll be a headache to manage
...I have a question.
Its possible to have maxed ferrium bottled water and ferrium bottle, right?
yeah
and if you want to send the liquid to storage, change bottle type depending on where you got the liquid
Yes
what would happen if i unload the bottled ferrium and there's not enough space to hold the extra ferrium bottle 💀
you should chill out a bit when you start to tap into the 90% discount and below ones
Waste of power if you ask me hahaha. Unless its for making new products.
you can destroy items
or sell them through depot node
yeah but is the destruction automated??
no lol
otherwise it's a lot of pain and suffering cuz you hoarded too much
oh my god endfield 😭
Fluid separation facility is the most useless facility. Still waiting if Hypergryph can force us to use this facility
if it really scares you you can hide material in V4
again, that would require manual work
dumping bottles out gives you bottles back
you can use those in production and stuff
yeah but what if you overcap bottles
nah it's fine tbh
sell
...Why do you want all those ferrium bottles in the first place?
it automates dumping like above
thinking of what to do with the excess xiranite once xiranite comp is maxed out lol
Do most people that make 13.25 SC/min use 6 reactors? Or 5 reactors but with 6.25/min sewage input? I wonder how we get 6.25 from 30
nah dont slander em like that, it's a lifesaver i didnt expect when i needed to transfer liquid one base to another
well that's what the upcoming xir event is for. It will require all the xir you've got.
Right now i'd rather dedicate PACs to specific productions that has the fluid near the PACs.
what event?
where can is see this
.roadmap
and for the specific new items: https://endfieldtools.dev/factory-planner/recipes/
New stuff involving A LOT of xir is coming on the 28th
if you can’t be assed to actually go there transfer the job to sb else
can someone throw me a screenshot of the dev comm about the event lol
Just speaking strictly in terms of efficient production and not for hoarding purposes.
a guy showed me that. a moment
not everything has to exist for the sake of efficiency. It lets you do things you otherwise couldn't with liquids between bases
bottle acid and separate at other aic if you wanted to acid in another base
Is it not possible to switch the fluid type outputs in the purification machine?
Nope and it's annoying.
My god
Not now, we are gonna riot in their survey for that
It really is
It's not pretty.. but it works.
"the manufacturer gave us some bribes to make the outputs that way endmin"
Yeah, like what Belmont said, the one click button to alternate outputs simple & good enough too.
I really wish there's a way to auto switch over production once you ran out of mats
pretty much impossible cuz you'll end up with leftovers that clog the damn thing
Give us more than 2in2out for expanded crucible 
The solid item did, but not the pipes😭
They read the first half not the second half 
should I take the right side grinder unit off and replace it with xfer powder
to save 2 originium lines for xira comp
the ui would be weird
How do I regulate the amount of plants produced?
I modified Kyo's 1.1 base by getting rid of the Extra section and putting up a splitter onto the yazhen supply line, making only every other one go into the refining unit so as to not clog it up (the extra 30/min sandleaf powder is all I need for the dailies, I don't need any else clogging it up). The ratio is 420/410.
How should place the prod lines between the planting unit and the seed-planting one so that my production and consumption of yazhen are equal?
expwndex crucible has like 2 uses anyway
like yk how the current one is 2 pipes out and 1 item out right
if you were to put like 3 pipes it would be asymmetrical
I'll take an image to show what I'm trying to do gimme 5 minutes
No
I wonder if they could use yellow & orange highlights for their output belt as well.
what is the current max setup for wuling PAC?
Allowing only one type of solid output belt with 4 output belts sounds so redundant.
Maybe you can produce at 120/min in the future 
The crucible's recipes none even can process items 120/min. Only 30/min🫠
Maybe future tech tree includes improved efficiency 
Just put all sandleaf into a deport node separately
My sandleaf production is fine, it's yazhen I need to regulate
bussin'
any tips my wuling been at 0 power for 2 months already
Get power
How does one play without power for two months 
bring v4 hc battery to temporary power your base, while start making wuling battery
that is the neat part
you don't
someone remind me how to cut a belt in halves again
like 15/min output instead of 30
Use a splitter
Splitter
You are welcome
i jsut left it there or maybe ak:en might not be my main gacha. but yeah i need to do it now to utilize the bp mission and reach level 12 wuling still at 10. all because i made an irrigation for the plant plot, harvesting untilthe required number of materials been gathered for orobeyl rewards and shocked to see it fell to 0 power the day after that.
Like and subscribe
and feed back to the same line to cause clogging?
Thats one method yes
Uh did u not make any battery 
Remember to space splitter and converger or it will randomly break
Speaking from personal experience
is it possible i believe ot. how
Moving acid is a pain
You tp to V4 take battery then tp back to Wuling
For a moment I thought you drained the whole damm reservoir
I wish.
Moving it from A-B was time consuming but works
Then unbottle in core AIC
what is the max setup for the current wuling factory?
as if using conduit was a pain...
I need space for that
you know exploring and you have a chance to gte wuling battery from drops. but idk where are the spots and i dont believe once you collect those from destroying boxes you do it again after reset. because from my experience i keep destroying that one box that gave me wuling battery before and it never gave me again
I don't want extra yazhen
Go look up a 1.0 wuling mega base guide and use those blueprints
I insist that you add spaces between coverger and splitter.
anyone have compact hetonite component at 0.75 eff?
yeah ill do that. but before that i need to destroy all the zip lines i planted across the map. which is already a hassle huhuhu. anywayyy thankssss. have a great day ahead
uhh, for easy transfer, go to dijiang.
open inventory, there should be button there to connect to v4 warehouse or wuling, so just go to v4 warehouse, grab hc battery, dropto wuling until max then install thermal bank at wuling
idk why people still use that outdated pic, this is the simpler 15/s limiter
Just use your brain, no way you need pic for that
ill try thank youu
No brain left, only chatGPT. 
Heavy X Bottles snug inside the facility. Won't need to worry about acid bottles
yall are we f***ing serious......
Even chatGPT cannot save you
Shame, I'd rip down half the pipes if we could move acid around
youre not gonna believe the shit that killed my base's power
.... mine more brain cell then refine it into brain....
the cuprium clogged itself due to having no ongoing hetonite
this then killed my sewage

which killed all production
Respectfully skill issue
are we f***ing serious with this shit
im being punished for being slow
how tf is that even possible
just don't clog 
how was i supposed to know cuprium powder can clog in under a day
It doesnt
how tf is it clogged
U didnt set up properly
Therefore
Skill issue
are you one of those that ran 8 crucibles in advance?
im seeing clogged proto stashes and a capped powder depot
i want to confirm in 1.2 do we basically stopped produced medicine since ferrrium and cuprium is allocated to hetonite?
(excluding some crazy min maxing tech)
looks clogged to me
i had to go to school
Bruh did you protostash cuprium and other stuff 
i didnt have time to setup hetonite
its just powder
Show het production line
so much powder that it cant stash due to insufficient space
yeah refined ore seems more flexible anyways, you could've burned it all away on comps if you had no time to do anything else with it
thats it
Powder gain/loss should be neutral if your het line is setup properly
stashing powder before you have hetonite set up clearly a bad move
the confusion is we don't encounter that because our system works reliably 
i didnt set it up yet cause i had school
it's k just set it up now
and my dog ate my homework
Well then u shldve expected it and setup overflow belts
how was i supposed to know not setting up a temp hetonite would snowball so hard
unless you have a dead factory with empty depot for 3 days straight you aren't losing anything anyways
whats overflow pipes
Emergency buffers
smh just delaying your problem
Aka stuffing your entire AIC with protostash
I like your style, bold and angular
just discarded 10k
why stop at 10k, delete it all
should buy me some time to get a temp hetonite
cause i intend to setup my hetonite
i hope we are getting another subpac..
idk i can squeeze 12 xyranites in without more space in my goldfish brain
nah you can totally fit 4 more forges 

you dont need one, so far only core aic and less than half of Marker Stone AIC is used
What the F***
ngl I don't have space for 4 more forges either
i guess i'll have to make that happen
Jingyu AIC is completely empty
cus I sprawled belts everywhere for fun
what is this
what is what ?
do yall not know how to be space efficient?
is that a requirement ?
if it fits everything it's efficient
⬆️
at least it didn't clog for 8hrs

fix your production before you judge someone's base 
sounds like yall are low on space unless im not reading this right
the production is fine

no I'm just into the aesthetics of miles of belts
^^^
its just a rare case of the snowball effect from unexpected sources
free real estate
having some spacing makes the factory looks better (for me)
gonna make use of paddings and margins

why do we only get 180 cuprium.....
we all ask that question
if only I had the patience to stitch pictures together for full base spreads like this
make it an even 2 game.....
when is game doing this for me
import it to enkad and take a screenshot there 
what is the current max production at wuling?
oooh right i should look into this
but enkad has no lighting 
why are we shitting on other base
but would you... global lighting or shady/shiny spots stitches

I'll take the funny lighting just cus it's shiny
have someone crunched the numbers yet? on whether its feasible to buy all the artifice tickets
am i only yielding 0.75 of the liquid hetonite
yeah, gotta deliver and stonks
every week
that doesnt look right
oh no, delivery?? 😭
unless I missed something
idk if i have the patience to wrestle with other players every day i sometimes resort to V4
let me find the calc
someone help me out on this pls
i wanted to know if its enough for artifice tickets and artificing
how much of that liquid hetonite should be yielded?
Yes, and its gonna be like that for a good while
thats bs
0.75 is like close to nothing
can such a rate even reflect on the aic's statistics
wait... I might've calculated the stocks wrong
do I need to cut down my yazhen syringe production if I want to make 6/min hetonite parts?
calculating it as +3500bills on 125 items/day is correct?
yeah you have to do some deliveries
is the extended reactor even worth using on hetonite
5 of the reactors dont even need to run a 2nd formula
so you can double with cuprium solution
5 trillion hetonite
?
you literally answered your own question
you have your own answer

is this correct for 25/m?
wait wait imma do math on this one
look's good
assuming the converger isn't angry
5/min is the only cursed one
idr if that actually works, roundrobin is mysterious to me still
it is correct but add gap between your convergers and splitters.
you can test that visually. every 5 units, there is one skip line
I need a better wuling plant setup that can daisy chain and not take up stupid amounts of space
roundrobin only works if all converger neighbor are belts
if it has anything else like splitter/converger/unloader/unit input
it behaves in priority mode instead of roundrobin
I'm so tired of putting plants in every single planter
I know. Half my main site is sandleaf. 
nvm it is 25/min
It feels good watching my Hetonite production run smoothly
ye this was the intent
I checked on the Xira line
meanwhile my hetonite is off cus I'm lazy to swap my medA off
I built the whole thing and then decided I had enough factory
that's a lot of yield
Yeah
dude is asking for a xircon crucible clog here
I should probably turn off my hetonite comps tbh
guys rate my double acid pipeling to main AIC
even without PWM (3/min burn) you're making more SC than you can sell right?

what in the
I had to abandon my jingyu to farm water pipe cus I ran out
you're lucky we only need 2 pump's worth of acid
or unlucky, idk if you want more pipes
look again
you ruined it at the very beginning when you went underground, 0/10
its 4 pumps
isn't it 3 pumps?
if you're running max copper to heto
oh you're making lesser batteries. I just went with full wuling battery on hetointe. we make to omuch wuling batteries for stockpile to be a concern, and there's still hetonite/ehavy xiranite overflow
oh right 3
the map ruined me 😭
no I'm not making less bats
this is with xtransfer dense powder
bats is still 12/m
what i mean is, would the next pipeline put you into pipe limit
that's why I had to ask for 25/min
I mean, 12 + the lower quality one
no
12 SC + xira gear
not 12 SC + LC
oh you're making components okay
have u already seen im running 2 sources 😭
assuming you're doing xira gear with just transfers, I see little point in delaying. let the xiranite "clog" and get another outlet. For the other side, let it hang back, you're ultimately waiting for transfers anyway
at least i support that more compare to bottling fluids just for aic transfer
I ran out of facilities
nice pipes
it's not jank enough if you hit 512
their base have stronger water pressure
ricefield area 
a solution I never iamgined to use
holy big brain
it's giving off the same vibes
genuinely what are you trying to over there
w8, u can do dat?
We need an #aic-art crossover channel 
i made a few
#scenery-captures message
#scenery-captures message
How many factory chains should be built to ensure maximized efficiency in producing products? And what are the factory cains that needed to be built ti produce the most used products? Example: to efficiently produce 5 xiranite, you need two carbon chains rather than 1
Wait that's genius
generally you can look at this via the ratio of the product you're making.
I know but like the amount of things needed it and the other things that needed the thing to build the thing is just kind of too much, i was hoping whether there would be some sort of chart or excel doc that i can read
Reminds me of Satisfactory, before all the free planning apps came out.
it's like I'm seeing my base but a different format
this is art, hang it on a wall
I was making a 50x50 full cycle 4xriranite production and now that I'm done I want to save it as blueprint. It says I placed too many facilities and blueprint cannot be saved. what's the limit? why the limit? it's stupid, we already have a size limit

Do I even need more than 1 extended reactor for hetonite?
Ain't it just 5 normal and 1 extended so it can also process the hetonite liquid
does the manifold conduit flow double liquid?
yeah just that
5 normal 1 extended
is one purifier enough for that?
2
no
the underground pipe acts as a singular pipe, so only 1 fluid type
so whats the point of manifold anyway?
condense building
1 manifold outputs at the same speed as 2 conduits
only matters really if you reach building cap
where is etreum
is this the correct way to produce xircon effluent
do I need another water treatment plant
damn new cannons are so fun
i heard they can produce 2 mats?mine only one can u enlighten me
instead of 2 reactors producing half-xircons, you better have one producing full xircon belt, and another helping it by giving it the xircon effluent
this is my 12 SC setup
there are 2 ways to do it
the basic version
the self backfeed version (same with harunachan's pic above)
damn that's cool
does it clog?
haruna is using the 2nd version
that is less prone to clogging compare to the basic version
because the basic version requires space in the sewage pipiline to function properly
none of them should theoretically clog if refining units/sewage remains constant
I have this, constant refine/sewage but it clogs a bit.
i vouch more for the 2nd type, backfeed has always been cooler
, and self corrects itself
hi, how do i dump water? trying to get rid of water from the purification unit from the xircon effluent process
overflow to river. fluid supply unit
feed it to refining unit if you can, those need constant source anyway
or xiranite liquid crucibles
it generates very low water it will slow stuff down
i have dedicated water lines for those, don't wanna make more spaghetti and theres no overflow gates in this game
oh rivers accept water infinitely?
#aic-factory message
refer to this image for example
as long as the source is infinite. yes.
you don't want 4x inert purification to not run at 100% anyway, so i dont get very low water stuff
the 60/min xircon - 6/min heavy xiranite production is a closed system than needs to run at 100%
agreed. that is fine in and ofitself. the water bit is slow is what I mean. unless you combine the 2 yields on to something.
Hi, im having trouble getting my factory to max effciency. How do you guys balance ur forges between normal n heavy xiranite, like 6 to 2? n is it even practical to use the purification unit to remake xircon affluent
4 forges for battery
2 for xiranite to feed heavy
1 for actual heaby
1 free
You dont need to do the inert from batteries -> effluent
It just frees up 1 forge and bit of power
Actually no
It doesnt 
yea lol
i see, so ur only doing 6 heavy xiranite /min?
But uh ye
Saves 1 xira line to use elsewhere
U realisticaly cant do more rn
is there any way to control whats orange and yellow on the purifier
Nope
i was cranking out 12/min yesterday but my reserves r drained the next morning so that isnt feasible i think
this piece of shit isnt pointing in the right direction
Can only suffer
is that answering me?
Yep
I'm a little pissed at how nice this fits together
WHY TF
its best to use inert from 4 reactors in the 12/min SC for a purifier, insted of treating them with 4 treatment
Yeah i know
i see, also how do you make 4 hetonite solution /min while producing xircon for the batteries. my cuprium is not enough to do all that, do u do it in 1 huge production line?
Oh, it does save power actually, im dumb



