#aic-factory
1 messages · Page 281 of 1
maybe some time, because was too frustrated with the whole sewage bug
if your sewage full at the end side, the sewage will stay and reacted with liquid xyra
hmm, it might work if you immediately drain out the sewage?
The scenario you described is easily explained by belts going out of the depot pulling out xiranite at the same time as the stash sent xiranite to the depot. I would not trust those results without isolated testing
as in sewage doesn't accumulate after the passthrough
maybe, it just without protocol stash, direct feed to AIC make my xiranite warehouse more stable
It would, but due to the reactor bug this would not be reliable unless you used priority flow on the output of the passthrough
i see thank you all, i managed to find space so ill just make it so it doesnt pass through another crucible, that should be enough to perma fix it right?
true 
You need to be able to sustain some amount of Liquid Xiranite there to occupy the slot, otherwise if it's just 1 it will be eaten and produce the effluents
for that issue, yeah, for sewage bug, dunno
it should be same sustain, idk what happened for it to break down last time but its basically just 1 refiniting unit to 1 crucible, i think thats 100%?
Yes, but you need to build a bit of a buffer amount in order for the Liquid Xiranite to hold its slot permanently
If its exactly enough (1), it runs the risk of being eaten
Because it's actually always trying to process both reactions
how do i go on about that? by having a fluid tank or just by having 50 in the crucible?
But it can't do both due to slot limit
In the crucible itself
Guys
You can disconnect the xira output and let it build up a bit
it shouldn't reach if your output flow is smooth
it is clogged at the end of sewage?
okok i gotchu thank you
Wouldnt it be better to just disconnect the belt output from the 5th crucible, so everything can build up?

Liquid xira, sorry
How do i get 5th forge
likely never
cant yet, maybe next update
or yeah never
U mean outposts or?
uh it is up to u
how does metastorage works in region transfer?
Will wuling have 5 武陵 sunce 武 sound similar to 五
you pick the mat you want, the devs will make the item for you and transfer it
Basically what happened is, it sees Water+Xira, and Sewage+Liquid Xira at the same time, so it tries to do both
The total items involved for both reactions is 6 however, and crucible can only track 5, so it won't actually proceed with both, only the first (Water+Xira)
But if say, there's only 1 Liquid Xira, it can see that after it consumes it, there will be space for the 2 Effluents, so it will do that in between the time it takes to make more Liquid Xira, which now can't proceed because there's no more space
If you have Liquid Xira buffer amount in the crucible itself, it will be able to reserve its spot
陵 sounds similar to 零(0) so it's actually 50 
Oh
devs?
let just say system
Oh then its 2 kinda make sense
U know
Free mats basically
i thought u just share locale depot of valley 4 to wulling
i still didn't get
That's normal transfer, yes
that rizz 
Meta transfer is completely free
wait are you trying to use metastorage transfer?
so like 1.1k ferrium production out of thin air?
what?
we don't need factory in valley 4 for meta transfer?
yes out of thin air
It doesn't take from your resources
i explained it by logical sense but he didn't understand 😢
I don't remember the exact numbers but yes free
i am not resetting my metastorage transfer rn, but here is how it looks when you go to regional transfer. you can switch from stockpile to metastorage transfer and you get the item from dev? thin air? dijiang? protocol space?
Doesn't affect your existing prod from that region
Ye
free bombs, batteries, bottles.....
free arsenal tickets pls 
oroberyl pls ._.
well, basically that's the metastorage menu.....
i want to evade double taxes by using 1 reactor for liquid xyra and xircon eff but it isn't working 😢
220/222, lost 2 already with that much, about the same with 3/500 from xyra + 3/500 from xircon eff
idt its possible
but u can do liquid xira and jincao/yazhen soln
it's inflation, even the in game economy cannot escape it
can't evade taxes

Oh.. meta storage is like they make those on the OMV Dijang and send it down
That's why it took so long and so few 
took me a bit but I'm finally happy with my wuling factory/profits
But weird that it needs from and to region 
and then perlica send you 30k paypal bill
I'm pretty sure metatransfer exists to "simulate" other regions while they are offline
That's why it doesn't interact with the depot at all, it's just to let you use other regions' resources while not simulating them
damn... bro there is water like literally very near the Ferrium mine
Imma chill like this
I'm giving up. until we can do something about the tax
1 c type? Not 3?
Its clogged earlier

Oh.. XD
You want straight graph?
Lol can't escape taxes even in game
Even OG AK has texas

bro did you forget about me already 
we talked like yesterday 
We're good citizens.. So we pay tax..
-_-)
Guys how to connect conduits?
EN don't read
Click on facility and drag a cable
No offense but genuinely I totally understand
People dump on EN for not reading, but asking is simply a way to get info faster
Its 1.5 c per min cause im using only 1 belt
What is it again?

Like i said, forget about fluctuations.
its a feature 
Bro u should be asleep
why u awake
honestly man idk
wtf you remembered him but not me
Ofc i remember u but i forgot ur issue again
i was watching then played marvel rivals and now im on arknight bc i lowkey barely grinded it
so im catching up on lost work

u should call me now wink wink

cuz i aint waking up at the designated time lmaoooo
There's so many people talking here
always asking "why my sewage this, why my sewage that?" Or "why is it clogged and why its fluctuating?"
Ill sleep
like a certain someone said forget about the fluctuating!
u right sleep is precious
Ah right tax evasion. Nah im a good citizen 
Being a good citizen looks like
I hate belt bug 
somehow with overflow I am still having deficit xiranite
but way slower
like 200 per day
tbf I am doing to same thing I just modulated it


while having 0 at the cuprium refining unit
the belt bug made me have surplus xircon though
while offline
Yeah ur doing it wrong
cause i dont have any sewage build up since friday
I wanted to buffer it intentionally so the sewage wouldn't be a factor of slowing down xircon production
At a cost of 200 xiranite eh?
I could always slow it back down ngl
Is there still fluctuations?
Looks clean
is your xircon in the last crucible 0
Yes
i see
does your xiranite pile up in depot?
let me make a module that can alternate vetween buffer mode and despense mode
Why not compare?
so when the xiranite pile up to certain amount I use the buffer mode, but when it drops back down I switch to despense mode
Make separate
https://x.com/AKEndfield/status/2035552043302346908 dev knows our diabolical thought on sewage.....
and yes, they acknowledge tower grilling formation
//The Traveler's Guide to Talos-II // Special Edition 2//
Gotta hand it to Talos-II, there's always something new around the corner!
▼//Download game from official website
https://t.co/7ppoi3uzIb
#ArknightsEndfield #Endfield
One has buffer the other does despense
Really??

so I have to feed one of the xircon crucible back without merching first
can anyone test if this setup actually tax xiranite?
Nah i always use that
ok cool
so it's just production
Go to sleep
heckkk no
i told uuu i barely grind today i had lotta work to do and now im free i gotta lotta cleaning up to do in the factory!
Yeh the production process makes things poof
im a busy man
Okay good luck with that
but i guess when xircon capped in the last crucible my xiranite usage will be balanced
let me try to clog my xircon first
and see
that's what happen when you don't input 1:1 sewage, it makes all crucibles stay at 0
Im still waiting to see no2 on my sewage

Nah
Its 1:1
i mean the latter 0.99 is caused by the former 0.99 
miko do u need sandleaf powder later on in the game??
Yes
I have max sandleaf powder 
In my depot
Sandleaf is the foundation of most factories
Let me sleep
My mind's telling me noo
But my bodyy~
tell your mind the consequence of not sleeping, less time to play more
@wispy grove made two BPs 
xiranite rn is 19860
let's see if it pile up after offline
What even is that
okay
sewage buffer = clogging sewage in xircon eff crucible
it makes xircon production super stable by sacrificing more xiranite usage
sewage 1.99/s = merging the sewage from xircon to 2 cuprium refiner, while redirecting the remaining cuprium refiner sewage to treatment
this makes sure the sewage input is less than the crucible bug tax so you won't lose xiranite, but results in less stable xircon production
thermal banks use origirum every 8s so with one belt you are only powering 5 thermal banks at once
or 4?
my math not mathing
i just use 2 battery and one protocol stash
and i have like 3 of those type of units
then when i get hc battery ill do same thing but with those
on and on and on lol
Factories looking much better now heh
why this fitting unit doesnt send anything to the left facility?
can you show a bigger picture
agreed
are you saying no part is coming out for the left belt
you are using all input connection.
you are not using any output connection of that fitting unit.
sharkfin whatchu rate the factory!!!
we cant tell which direction its going from tho so idek if tahts the case
may just be invferted
Oh well, it went out few hours ago 
why your photo are always tilted 😭
bc my monitor to big mannnn
i just want my 10 per minute into gearing why it's not sending anything
so i do tilt to get full frame
Cause i just keep running out of the purple rock stuff
dont color over it
And my originium ore kind of-
Depleted cause by thermal banks
so mine them what i did was just stop everything i was doing and mined the rocks i always prioritized those
and id sleep and overnight id get what i need
so just stop using them let it build out to max then start using it again so then youll be fine
placing converger/splitter right at the exit causing random issue is a known bug, try to avoid doing that
ty
anytime
I have 11k back in the Valley 4 depot
I just don't have a high enough level to do the meta transfer or Regional transfer
RIP
yeh seems like moving converger 1 cell up fixes it
u need to fovus on getting valley 4 to level 8
idek how ur at wuiling alrdy im regional lvl 11 on valley 4 and havgent gotten to wuiling yet
yea, as long as you don't put it right at the exit
bridges are totally fine
so just focus on ur valley levels and wuiling just use what you can
if you want you cna just do 3 way split
wdym by 3 way split?
you have one splitter and it has 3 diff items going in diff locations
thats how i do most of my things
cause I sadly ended up focusing more and rushed through on the story stuff and didn't put much effort into the factory building stuff
very bad lolll me i got everything through the factories got credits and allat
i feel u w that i did that yesterday and im doing it rn bc i want my alc factory as tight as possible
and using most of my items to full capability
backfeed one xircon crucible sewage back and merge with 1 cuprium sewage, then feed into the xircon eff crucibles. The other cuprium feed into treatment
I mean i was running the sewage throught the bottom left
and it was working fine
if you want to solve the overflow you will need more space
all of a sudden it was doing some weird back feeding thinh
I have a wall of pumps unseen
nah it only happened when power went out
ive seen it happen online
there's already a warning from any edging site that if you edge you risk getting unstable factory because the game isn't running exactly how we calculated it
well i dont have an overflow problem if i dont try and be sneaky with the pipe

A very direct and compact as possible xiranite forge i can possibly do
tbf as long as the factory has 90%+ efficiency I call it a win
I stink
like 11/m battery instead of 12/m
I think what happens is liquid xiranite that stays in the crucible can react with the sewage if there's enough room
if it falls to 10/m then there is something wrong
yeah its weird that it does that
there are some offline bug causing it
offline bug with belts speed
so i just bypass it
crucible tax bug, belt stutter bug
and now its fine
how do I do it the easy way
that's why I say 90%+ efficiency when you go offline is acceptable for me
honestly what i did was just upgrade depot nodes the stock thingy and then the sub pacs
so i stocked up on ALOTTT of items took me like 4 days
cuz i lowkey was playing the game for like 16 hrs a day icel
upgrade owl station, depot ( daily delivery quest ) , each sub region lvl, stock store ( the bunny guy )
for each sub region lvl, assign operator who can give extra exp when trading with the sub region.
basically i was doing something like this
the largest income is maxing your outposts
sure
but the left cruicible was completely fine
but it takes time
my overkill anti clogging system
because im making slightly less then optimal batteries
imagine u did all that work for nothing and it clogs the next day..
but if everything maxes it auto makes optimal batteries

I tried to get to fancy with the pulling of xiranite and it bit me in the ars
Maybe not because the first few minutes the sewage was constantly being filled and used
I just do outlet direct
thats good the factory must grow
we could tecnically make xircon affluent and inert effluent off of base
the amount of belt bridges i use is truly concerning
Didn't feel like making a separate plant farm so i just combined it with xiranite forge
from "i'll minmax the shit out of that AIC" to "if it works don't touch it"
Surely this time I've solved auto-management Wuling 
WHY PIPE NO PIPE
already empty or output not set or wacky elevation or reaction clogged
its aic
i have redrawn it
crucible jammed because pipe isn't piping
treatment plant is idle
Looks like left is full to me
is it better to use 2 LC wuling batteries instead of 1 SC wuling battery since SC batteries are worth 4 more bills
Show us whats inside
i figured it out
effeluents weres backwords
inert was going to the zircon reactor
and the good stuff was getting treated
so when the zircon line backed up with garbage it stopped making the goods to then trash them
wait the crucibles work outside the area?
I think it's better to use whatever you're actually producing
damn that looks good
Ive fixed another problem on it gonna see if anything else breaks
the current factory release seems to be a bit randomly buggy
the issue with going full on LC afaik is that originium supply won't be able to keep up
but if you're only going with 2 LC and no SC, then that idk of
if you're worried about like the excess power being wasteful, I recommend using dige to come up with an oscillating bank so you can save up batteries
the crucible tax go brrr
nah its a mix of weird back flow
and my power system fluctuating
fair
but i think the current one now
is super solid
it even supports full battery making
automatic comp makers
if xirnaite is fulll
I have enough origium i think, im just making 1 lc and 1 sc set cos currently also trying to make components so can't do 2 sets of sc
ur probs making too much comps
is this good enough or i can do better
yup sounds good
what do you have on metatransfer if I may ask?
you can have ferrium on metatransfer and increase jincao drink to 2.75/min
1500/h right
yup
Yass..
25 per min hn
I thought making components costs more xiranite than originium
ok i'll try
there shouldn't be a reason to transfer orig from making comps
i would say making comps is one of the few things u DONT have to be super optimal on
Or make it drink C 3/m..
Just dump ferrium manually once in a while if u have surplus from v4..
my syringe C line with a 25/min ferrium meta. although I took the design from someone else in this channel
yeah but the xiranite you take is more than the originium you'd take from the battery ratio
manually...
you literally cannot do that, comps cost xiranite too
if I run only at 2.75, then the top refining and fitting unit will be turned off
if it's on, then it's around 4.25/min
Mine A&C with 1 crucible..
me who forgot to turn a sandleaf loop back on when I switched from xiranite components to lc batteries
only to wake up at both sc and lc battery lines at half efficiency
yup
25/min input?
Too complicated..
but... why there
1/6 is deposited so it's 30*(1-1/6)
also extra converger
See my second line ferrium at top left..
That 2 splitter already make 2.5..
Just simple like that enough..
nvm i'll do like u
just do it from the unloader, tbh just meta ferrium directly and save yourself a refiner
I actually start to not understand things anymore, but I'm not complaining
I haven't logged in for like 8 hours, and there's no sewage buildup at all in my battery line
lol
yeah I'm just pretending 1.5% loss on battery line is normal and moved on from it
it means I'm like 3k bills short of daily regen but w/e
Its all just our hallucination..
Yess.. Yess..
There's no such thing as clogging, item lost, item slow down..
*nod nod
Everything always working fine..
*nod nod
well yeah, my meds run at 99.8% offline the difference is huge
guys how do i get there
Blue zip?
Its just hallucination..
Just pretend it didn't exist..

fly
i think it does exist...
there used to be some ziplines on TOP of the mountain on hulu cave
It does exist but probably blocked by invis wall after the update..
Ur just wasting time..
Like this one also the same ig..
Even though its plainly in sight and only 80 range..
It always says blocked..
connect it like this :D
i just did it recently probably there's no invis border
they should increase zipline limit tbh
for fun :]
Also, if they update the invis wall..
Rip the zip and pylon..
hm...
i didn't think about that...
then they should make it possible to delete my own zipline on map
I mentally struggle to see how you did this
Simple.. Ask other who have one share their zips..
U add ur pylon and zips before removing the shared one..

im more limited on xiranite than I am originium, but thanks for the headsup
can i ask what is ts
power saver
Having belts is risky as it may not work properly offline. I'd suggest doing beltless or using Protocol stash (unpowered).
does replacing those belts with other splitter or item control work
Usually, you just use convergers.
makes sense
Pwm?
You mean dige
I just keep everything below 3.4k power instead, save me the trouble
Ill just add one belt next to it to make it1 every 54secs
I can't experiment if i keep using lower than 3.4k
Am i trippin?
If i do every 54 secs, the ave power is 2370
- every 216 sec will be 592
Thats lower than 3400
Maybe i wont risk it
Every 36s is good enough 
chat how many pump can maximum go into 1 pipe
Splitter+item control port
equal rate?
split into 2 then split those 2 into 2 each
You need 3 splitters in total
1 pump for 3 rigs
In daisy chain ?
Oh wait pipe
yea water pump
2 pumps 1 pipe
how many water/s
4
/
2 2
/\ /
1 1 1 1
Inlet and outlet things
He said 4 different items, which is cursed 
Let me show my current set up
Maybe he gonna use 4 refineries
Holy....
I have very tight space

Bro what in the world are u cookin
you’re early game aren’t you
why worry about all this
feed them all into a single stash
Nah I am currently in wuling but I am trying to create everything back in the old region
Segregation fears you bro
yeah and why 4 stashes separately
??
Man did anyone played create mod from Minecraft?
Hes a good citizen. Always separate meds to cans
I have 2 block space from where one belt is coming from
In create mod this was possiable so I though may be but that was not the case 💀
Youre using 1 belt for 4items
Yeah in a nut shell
Oh i see
Then why the f do they have converges for ?
So just in case one item gets full storage
just because something exists doesn’t mean you have to use it
The others doesn't get clogged along with it
convergers are for converging those 6/m item lines
even then you could just use 1 stash
Man there is no space
1 item gets full storage it will affect every other items
To use stach
you have 4 in your bp
Thats why its a separate stash
I know I know but I was cooking
what are you smoking
offload it to a stash behind it
No no im not against you. I think its smart
But you wouldnt have that problem if u didnt put all 4 in one belt

I though may be if I use spliter and item port I can seprate them but no it gets divided in to 2 still
On a different note entirely, what do I do with those bills
unlock next region level
Wait there is a third one ?
V4 has 3 outposts and max region level is 12
Do all main quest first
^ do more story
Oh I see
I am currently focus in wuling ill see later
upgrade those bunny store, you'll get to buy pull tickets and other upgrade materials or operator gift.
also advanced buff/healing food.
oh if you have wuling unlocked you can get the final outpost in v4
V4 which area ?power plateau ?
yes
I haven't been there since the fight and collecting those sand leaf
you don't use factory for sandleaf planting?
buy things
why do you just casually have 15m excess anyway
you never once thought those bills actually did something
Gear crafting
Guys I created a feedback https://discord.com/channels/950244160684834837/1485227609800441987
i went afk for 2h but yeah crucibles that don't need items input/output could be left outside AIC area
her name is Levitate 
woah, server can force kick you for being afk ?
what if you are on menu screen
set up a macro that moves around every few minutes
gets banned for using 3rd party app 
Because there's nothing else to buy
30m buck
Untouched
should i bother post my factory in blueprint channel?
if u think its a good contribution, sure 🤷
just post them :3, can always have more build samples :3

Was it a mistake to build sky forge independently from depot? No
Fair enough
accordingly, there are a small amount of xiranite losses when its being transferred from protocol stash to depot.
but personally....its too annoying for me to care for now =.=
i just make it self looped regardless.
protocol stash loses items?
10 second delay
also i probably should checked this earlier
Less faster than direct feed
wher yazhen solution, no optimal, rebuild
if its just delay, its fine....but when you do go offline......
items just mysteriously dissapear.
I have four directly connected to the crucible
but correct ration for cuprium is 2 parts line and 1 set of refiners into a bottles?
welp, heading out.
which makes one line of the new sryinge right
60 cuprium into parts 60 cuprium into bottle
Are these pipes directly from pump or fed by two outlets
pump directly
there is room to squeeze conduits in to the foot print
and 4 pumps
cause i'm refining the cuprium here as well
you can make yazhen solution and liquid xiranite in one facility to save energy, consider that before it's too far
I have so many pumps it becomes a wall (consequences of outlets and inlets usage)
not really, mine's independent as well
This is possible but i dont wanna imagine how difficult it is
Is it?
Probably not
just load yazhen into crucible that's all
^^
although it does mean you'd have to build your xircon and meds line next to each other
it would ruin the astetic
i am just abt to do that lmao
what's max wuling production?
and also not tileable
xircon/batteries on the left, meds on the right
I have mine below the battery production
in the middle is a shared xiranite depot that splits between batteries, cuprium comp, and xiranite comp (bottom)
depends on your setup, but if going for full profit:
12/min sc wuling battery
6/min yahzen syringe A
2.75/min yahzen syringe C or jincao drink (requires ferrium metatransfer)
Which is this
it's a valid approach but i'm not going to sweat that 50 power
my AIC is too far gone to care about aesthetics 
I mean tbf, that external reactor looks really cool
tbf i didn't know that was even allowed
Hardcore
100 power if you make both syringes though
guys which is the most efficient blueprint for RDM 9 wuling?
is that it? doing 1500 fer trans
Only work for pipes
mine so far
yup
tho your jincao's actual output could be higher
Wait, you can do two core depot?
syringe A should be flat as well
added in 1.1 yes
you have to buy the second core slot from the owl tho
jincao goes like this, maybe that's why it's like that
my brotha
ic
you just need 2 refineries, 1 moulding, 1 fitting if your only have 1 belt
this is mine. which runs at either 2.75 or 4.25 depending if I have 30/min or 60/min ferrium
if only running at 2.75, then the top refinery and fitting would be turned off
Man, I didn't even knew steward was updated
and controls would be adjusted
to change the flow
I currently run it at 2.75, but it was running at 4.25 when I took that screenshot
my current setup, bottom left is junk though

dang i really need that pov
I have a zipline there too if you want

although I prefer the one a bit lower more since it has a clearer view
why splitters are so weird
i had a splitter with bridge on the right side and converger on left side
and it send 100% items to bridge
changed it to bridges both sides
now 50/50
building outputs also do that
like my pic above? or different view?
the one I have
this
tho I also have one here
yeah this looks better
didn't get there myself tho, someone also shared it to me a few days back
Fuyu zip better imo, coz it make the ss really horizontal..
like this?
same i dont
lmao
im saving for rossi
i skipped laev
eh... just pull what you like 
however given that the reconveners we have are only RI registered operators in the original game
game doesn't have meta anyway. you can clear all stage with random bs
the choices aren't that much
i'm kinda hopping rossi can also do the funny thing by virtue of being a different heigh/having an alternate jump animation
the game thankfully allows waifu over meta strat
tangtang looks nice
The meta is Estella
i think i should get tang tang
1st pic what i want/had to do
2nd pic is what happened before
it's a known thing
this is old splitter priority bug. it have been abused so much.
This bug trigger when you put converger right beside splitter
it will prioritize the belt without converger
and dev seems have 0 intention to fix this
and this seems to have become a feature

wait its predictable?
ye
I think there's like, little to no randomness in the AIC
unless if it's like an actual bug or something
so if you test enough, even "random" looking events can be predicted and be used lol
wait wrong vid
like the biggest thing i want in the factory is overflow/underflow splitters
I want actual splitter priority
I think more or less like a diverter splitter
like it prioritizes branch A if possible, uses branch B otherwise
Imagine dev try to fix it, but it becomes messy instead..
All factory will be ruined coz we all use it..

i think this one for output. assume the left stash as splitter
would easily solve the overflowing sewage problem in the sc wuling battery line
bug also work with stash yeah
isn't sewage overflow problem already been solved. the unsolved one is the crucible tax, that make item vanish from you when offline
yeah more or less ig
thats it?
i put a splitter on both lines and then a converger the lower priority?
does the splitter have to be against the building?
to trigger the bug you must first have splitter or converger right next to building/the first splitter
the one with more converger/splitter will get lower prio.
the belt with no converger/splitter or less will have higher prio
this bug is more stable by using stash
especially on offline
or you can use your production building directly like refiner unit instead of stash
that won't trigger the bug
you put the splitter in the output
not input
in the output side
i designed this awhile ago
oh... 
we unlocked 3 povs now
it does a 50/50 production split between batteries and chips/parts
west east south povs
until one of the two items is full and then becomes full production on the other
we need north next
seems already a good design then 
yeah but for educational purposes lets say i wanted it to prioritize full sending the chips first with the priority bug
but here works just fine 50/50
converger to the left belt on the top
left one is converger sending things to the left
oh... right
what is the building on the bottom?
no wait
does that split on the middle depot now have the priority bug?
try remove the splitter and put it again.
nah nah everything works good now just curious why it doesnt follow pattern mentioned before
took 5 cuprium from bottles and 5 curpium from parts so nothing would be staying afk
before was just 10 from parts
probably because it's a bug. and yeah it might not work sometimes. but usually after you remove and put splitter back, the bug usually triggered
i see
based on whats been described so far i suspect its an intentional optimizer to protect against joshs
oh... wait no. the bug didn't trigger here. it behave somewhat different here because your converger have another input.
if the belt with red arrow have full speed. it will make the belt with blue arrow can't go to the left side. but since red belt not at full speed it working normally
its beautiful
aight, rebuild time
i assume this blue belt have full speed?
can someone send me a dige that has exactly 1 battery every 40secs
bro actually making LCW..
i just found 100% material usage while doin comps 
well it's outputting 10 cupri, idk if full speed means this or max belt capacity
whats this?
its a production vs materials balancing
oh... strange... indeed 
not full speed should not trigger bug
dunno about this one
let me rephrase is that a personal sheet or is that a tool thats available?
Yo guys, can anyone guide me to the AIC factory in Enfield? I'm level 50; I still don't know how to use the AIC factory. I just finished the main story quest, and in Valley IV I don't focus too much on that factory, and now I need to make a factory now for resources, and I don't know how to start. Can anyone guide me? Thank you very much.
go place miners one every single ore node
turn ore into dusts and shinies
wait why making LC batt when you already using 2 xircon crucible, won't that just wasting on power usage?
I`m stll confused how used the machine yet
uh... i don't know where to start. like you know it's just like puzzle, where you order and combine building?
machine is you build it based on the in game recipe
i mean, i just need +1 packaging unit right?
yeah... but why not just make all of it into SC tho?
what mat should i start first??
but its ONLY if doing comps right?
since i buy all the expansion on valley IV
true
except the last depot node
ain't there in game tutorials for stuff? As for where to start, the endgame is just making stuff to sell so it's medicine and batteries iirc
actually my reason is to slow down SC a bit, and let LC accumulate
Have you used electric mining rig in every ore vein?
Oh btw how to increase your power i search it on youtube and i still don`t get it
create batteries > put batteries in thermal bank > power
mining ores ig, getting electricity to origin lodespring
Yee but i dont know how im confsed
that is not how you should think. you should start thinking on what the final product you want to make.
so you think from top down. that way you can know the recipe
oh... i see... 
yeah, get your mining rigs in order first 🫡
is this all of the location on ore
there's ores on each area
ores are in each and every location, need to get all
why do these 2 relays wont connect
Thermal bank.
Try use originium ore or use batteries
why indeed 
also look, im turning 0.125 SC (400 power) in to a 0.5 LC (800 power)
origin lodespring mentioned because it doesnt have it's own AIC or PAC so you need to start in originium science park and connect electricity to origin lodespring which could be not that obvious
oh cmon js tell me why
three types of ore if im correct it`s the color blue, purple, and yellow.
purple ore almost useless if not minmaxing
on v4? yeah
just get max orange and blue
so only i get orange and blue
also you cant get last blue ore mining place before completing wulfgard quest
i already all the quest hehe
I dont know why either but the power facilities inside the AIC area will not connect with those outside, only to the PAC so your PAC is probably 80m away from that pylon
i only did wolfgard
so yeah get 1080 blue and 540 orange
then either research how to build factory or just copy someone's blueprint
latter one is boring but works if you don't like factory gameplay
can also do the latter one and reverse engineer it so you learn 
Range?
umm i got a problem i dont know how to power up my electric mining
electric pylons
Electric pylon.
yee i dont know how to connect on relay tower
but 0.5 LC need 2.5/min xiranite. and 0.125 SC only need 1.25/min xiranite 
you are just burning more xiranite tho
from originium science park
nowhere, you have to bring it from other region
whaa
Well, yeah it's very far
And way more frustating to do
its not that bad, but it is pretty bad
i just told you that like 5 min ago
that is gonna be pain
Well, at least it's not as bad as what i did.
Building a lot of relay from main PAC to almost everywhere just to realize there's sub-PAC about to build
i wonder if the future of endfield factory will be terraforming the planet
atleast ur not one of the people who go far and beyond from originium science park to power plateau
i did not know this factory will gonna be hard
when i went to wuling and i saw their pylons there I thanked god
i dont even start in every region
there's a learning curve, yeah
you can do it o7
A curve??
you need to study a bit for factory
wait i thought thats called a rowboat
oar you sure
no the oar is the paddle on the boat
Selling sewage bottle?
then i thought those are called paddles
attached paddles are oars
and paddles need 2 hands unlike oars
they should give you negative earnings for that
Aint no way i would pay while i made cuprium bottles.
Besides people can simply discharge or use it as weapon 
This part stopped working pls help
why is that bp similiar??
I have an advice, stop using that bp
That bad?
it clogged like 4 times in a row for me
Shit
shits flows to another crucible and cant produce xircon
Does making 12/min SC Wuling really end up having extra 60/min sandleaf?
Any advice what else you started using instead of this?
they made a new one on that thread
you prolly used the old one
oh btw whats yazhen syringe B?
can we go any lower on power making the same list of things?
no. 12 SC are eight grinders aka 8/3 sandleaf lines. you need 80/min sandleaf total. even if you do 2 full sandleaf loops for both SC lines, that should only be 40 extra
i finally figure it out how to connect on the hub to originium scinece park to connect relay towers
personally if you have sandleaf production in your SC line, id go for a full loop and a half loop(1 seeder and 1 planter only) for space
we are saving power with this 🗣️
what if
idk abt that chief
oh
whats with the space in the yazhen C lmao
space for more refiner if ppl want
wait what
you have whole PAC in originium science park
why connect from HUB
the way i do it only has 1 depot loader and converger
also
i dont have relay tower yet on orignium science park
thats 2 convergers tho
probably just need to complete side quest
oh
to unlock it
you still need to connect from hub to orig science park tho
to complete the sidequest
zipline thing
there's a side quest to do that?
to unlock subpac on that no?
Why is the cuprium gear have the same sht as the one tier lower one
to connect HUB with science park
i remembered i have to place a zipline where the injured ppl are to subpac
eh, it's not hub, it's lvl4 PAC quest
oh alr
you talk to dapan to unlock it correct?
to unlock pac? idk i just found it thru quests tab
promoting to lvl 2* quest
i forgot the story
Iirc its about injured people wanted to go back to outpost
ah yeah forgor abt that, other people to save in lvl4
So still good i did not waste time?
maybe
if youre planning to explore the whole park
and there are also some ferrium ore area on the left so its worth it
Alr thank you
I hope we get floating belts we can layer like these ones.
then when you go offline, you lose more materials since you have 3 belts running from 1 end to another facility 
i cant remove belt that hides behind a pipe from top down view and you asking for more layers )
my best friend
shiny new battery line
I was thinking to lessen the Protocol Capacity in Wuling City is to Outsource everything needed like every Pump will be build in Jingyu Valley or Qingbo Stockade. Though Pipes will be all over the place.
@wispy grove weirdly this setup still buffer the sewage in the crucibles, despite theoratically it's outputting a totall of 1.99/s sewage while offline
3 eyed skull formation..

oh I was late, they actually fix it now...

oh
but we are still having clog issue so it isn't really fixed 
so that's why my sewages tanks no more
we showing off battery lines?
who reported it tho?
unless they read our conversations here
they kinda check the official server for bugs sometimes
Many people probably. Even in Content Creators talk about it.
Each time they read here..
The point of talk always the same.. XD
hmm, is it applied tho? or they forgot conduits?
I am still building my overflow system regardless
sure and i respect the symetry
Im so finished 😭
doesnt matter, ill post it on blue prints anyways

btw they haven't addressed the belt bug yet though
it only stated about crucible and treatment. No news in others.
and reactor
someone stole my xiranite
while im sleeping
I dont't they will fix it, Its a tick issue until they introduced Mk.2 conveyer belt.

