#aic-factory
1 messages ยท Page 251 of 1
Dawg just do 2 line of SC
Max profit
Looks about 1,5 SC
he probably does have 3 but working at 50% each because of that power usage
3 sc + 1 lc is 900 ori/m
What do you transfer?
Yeah 2 SC line with 100% efficiency gives you 12/min
1500 ferrium
yeah looking at the ferrium usage, it's probably 3 50% sc maker
@gentle sentinel
ahhh ok
anything to improve in this syringe farm?
he doesnt want to overheat his facilities
give them a break
the interns inside matters too
Is your battery okay?
yea battery is on main factory,
I meant the waste input
can this be sold ?
you shouldnt be using 120/min of ferrium in meds C
No
what else should i use ferium for?
SC battery?
wulin sc bat
so i'm guessing for SC batt we want 3x Dense Orig and 2x zircon inputs for max efficiency?
2 line of SC battery
4 dense and 1 zircon
It needs 2 Ferrium line
so 8 line of ori, 1 line of ferrium, 2 line of xiranite/sc maker
wdym by waste input 
Where you need to make Effluent xircon
nuh uh
Why tho 
pretty good but its not small enough for me
why not 
my build rn is jank but it all fits in main AIC
reduces wuling battery usage
In exchange of reduced Profit
no?
what do i use that for
?
sc w battery is still at 12upm
Make SC Battery
hmm
Yeah? You could've used that line of ferrium for Syringe C
What do u want more free space for
i wonder if i should craft hc
This base mean easy build
does the new battery and srynge A not enough to buy out qingbo stocks
Ask @marble yarrow ngl
it does
as low as this
so no profit reduced
-2? what 
dont worry idont wanna solve the decimal
this better
the 9 is after battery use
yeah you can go mad and use 2
So do i
is this when ur not making any gear comps
I might do that later
I'm hovering at 3.5kw power 
you want a mega list, i have
i kinda wanna max out my gear comp stockpile im ngl
oh cool
Use water inlet and outlet
1.1 gear comps ratio config with ferrium meta-transfer (in items/min):
0 comp: 12 SC / 6 YazA / 2.75 Yaz C/ 0 CumpriumComp
1 comp: 11 SC / 5.5 Yaz-A / 3 Yaz-C / 1 CupriumComp
1.5 comp: 10.5 SC / 5.25 Yaz-A / 3.125 Yaz-C / 1.5 CupriumComp
2 comp: 10 SC / 5 Yaz-A / 3.25 Yaz-C / 2 CupriumComp
3 comp: 9 SC / 4.5 Yaz-A / 3.5 Yaz-C / 3 CupriumComp
just saying that the .125 yazC for 1.5 is not worth it lmao
gonna use more power just for .125
how did ur factory look like?
for yaz C
my factory looked like a normal yazC 6/min but with half the refiners
so just 2 refiner, 1 fitting, 1 moulding
idk what extra are u talking about
you can make more profit by crafting more xiranite comp + low cuprium comp no?
maybe im just a fraud ๐ฅ
also, damn the flame + marsh works soo well
but where tf are those ferrite parts coming from
Oh you're making 2:1 sc heal a bat
God, I think I'm an actual fucking plumber
I don't know where an inlet goes half of the time
Is there anyone wants to share their blueprint that produce everything. Idc if they have lowest yield
ig i'll put grinders here so then i can optimize the battery process
it should be 25/min once it died out. and it perfects 3.125
i mean the depot storage
has there been a brain big enough to configure the cuprium parts to distribute SLOW ENOUGH to send just enough for 4000 [or very close above/under it] curpium components per week
so you meta transfer 1.5k parts?
without using item control port.
then 30 ferrite into mold
yeah
and then u split the remainder between moulding and fitting
its a 2 depot output of ferrium that totals to 37.5
one depot self-staggers to output only 7.5/min
I can't place anything on the top right area of main aic in valley IV even with max upgrade, can anyone help?
just need to produce 0.4/min comp which is like 4032/week
It keeps saying restricted
fk ts im sticking to my 3/min bro ๐ฅ
yeah its still ok tho
.125 of 16
would need a 4/min cup line
it looks satisfying to do yea
but its beyond me
i can only do simple stuff like 5.25 yazhenA
Btw now that i look at the new turret it's just ifrit 
Flamer+knockback+slow is giga broken ngl
surely this wont clog my drug liquids
@small creek
related: do we know to compute the power drain of PAC if runnong on just battery reservers?
yeah imma just 1/25th the part unloader tho
this part here is crazy
i cannot understand how u managed to throttle without a depot loader
this is what im saying when i say beyond me lol
the converger prioritizes the side inputs
oh ffs converger/splitter priority
yeap
looks like im never gonna get how that works
How can you even achieve 1/25 belt wtf
wait lmao wrong
2 1/5th belt
25/min
Trust
gonna depot loader the 5/min
i just didnt bother coz lmaooo
so like 30/2/3
can you guys check your seed picking unit for yazhen/jincao, i wonder why mine gone after logoff when i put 50 in before
but yeah imma turn it to be realistic
It's mathematically impossible to get a multiple of 5 with just 2 and 3 split
it is
yeah i even tortured gemini ai but they folded
30/2 = 15
15/3 = 5
put the 5 in the bag, and let the 25 go to work
what is even the point to make the new syringe ?
more money?
Pretty sure I saw a 1/5 a while ago by using 1/4+1/6
more money
Lemme find it
You're misunderstanding it, that's 25 per min not 1/25 of a belt
they give less than lc battery
oh 1/25 is just
why
i had a 1/5 belt
Money and a little better healing purpose i guess?
anyone?
hihi
Mine work fine
Sorry my brain cant process this
it is still about 50?
Yeah, clock between 49 and 50 since yesterday
i always preload planters with half stacks
Huh, you too have some issue with log off factory production then?
yeah, still fluctuate
basically it does a 1/6 division with a 1/2 and a 1/3, and feed 1/6 back to the initial converger
And while you're online everything is fine I assume?
yup
FUCK
holy shit its so close
I doubt it can be a coincidence
Counting you in and myself it's three instances of log-off issue I personally know
the routing looks convoluted to fit 3 wide
atp do i just go around wuling and hydro mine everything
I've read a few people are having issues with offline sewage, where it's either getting clogged/not used or disappearing/overused. Is everyone having these issues?
like im not sure where else i can save power atp
I had an offline issue with my xircon production fluctuate despite fine ratios.
water treatment costs so much
I cant tell which is splitter and which is converger, do you have a record of that
where is this screen ?
Happened to me too. I ran out of carbon and when I checked planters, they were out of yazhen
is your yazhen A using all 4 lines of cuprium ore?
click on your aic
I was using three at the moment for syringes and one for components
I'm curious if devs know about this issue
why does it look like it isnt 1/5th ๐ญ
the thing is, once one of the line get clogged sewage will not go to xiranite

I bet no lines were clogged during the night since at the morning when I logged in today everything was working fince except my reactors ran out of xiranite (I left extra in before logging off)
well well well would you look at that, many people are starting to notice the offline clogging issue too
I can't think of anything other than some kind of server side issue.
this is pissing me off
My factory might suck, but it does it in calculated way
im thinking of something like this to prevent it
it works when i tested it 
yeah i should test it first
What's this clogging issue?
Ok so this is the first cycle, then after that it's 17.5+(17.5/3) and keep repeating am i getting this right
how should i get this down to 1/min?
Is it better to make new batteries or syringes for trading tho? :/
let it run online for hours, it doesnt clog. which is totally weird
i did though?
split the xiranite to 1/3, 2/3 going back into depot
but it is fluctuating
Belts slow down while offline
Split feeding lines so only 1/3 goes into facility and two back into storage
But that shouldn't cause a clog no?
Presumably clog happens because of pipes I think, not belts?
I'm not in the loop here, what's clogging?
yeah
you got this faster than i did
Clogging happens to sewage
guys, is 2 lines of sc wuling batteries the way?
But items that are transported by belts tend to disappear
Does it cause cuprium to clog with sewage?
I still dont get how it's 1/5 in the end tho
Yep
Basically any part of the cuprium system may clog while offline
Either from running out of items or overflowing
is the config same?
so i should see 6/min of crust?
Use priority flow and it shouldn't clog even if belts slow down
There might be desing issue, but not in my case at least. I ran out of belt-fed items somehow?
It won't fix the actual slowdown due to the bug, but it will stop things from breaking. Plus it's a good idea anyway since making components triggers the same failure condition
All my machines have been clogging when offline since launch 
like this?
How could reactor that takes 30 xiranite per minute and fed directly from depot node run out of extra xiranite
im just gonna replace the conduits every time it clogs 
sho youre saying if i dont build components, it shouldnt be clogging?
i will never learn priority shenanigans
cuz there is 3 more reactors?
Yes, but I believe there's a bug rn where belts slow down when offline. It would likely trigger the same failure condition as building components
tbh I think of using fluid tanks as extra buffer, so if it overflows you can replace it with empty one
Apparently kyostinv ran into this bug
that also sounds good
nope, I was feeding one reactor with one unloader directly, no splits
but i dont even know where to put it anymore
im edging fac limit and the space is tight af cus i put everything in core AIC
bruh how tf
I personally just put all originium dust into Tangtang's village
good thing my 10.5/min SC looks safe from sewage clogging
subpac has a whole lotta nothing
im not talking about splits, do u use 1 reactor with xiranite total?
did u split the sewage from yazhenA by 22.5/22.5
well its 200 meters max or 250 max if you consider the pull limit.
thats what i did lol
Maximum refers to maximum production based on your design, not absolute maximum
Two reactors (60 xiranite/min)
Xiranite production maxed obviously
no didnt. i just have an extra water treatment
ew 50 more power..
beat it
beating it UGGGGGHHH
Had to abuse chatgpt but damn this is clever
im not even gonna ask how
If that's what you're using without priority routing of some kind, you are still vulnerable to this issue
its ok im not fighting imaginary problems
i did my homework but i also forgot my steps ๐ญ
Making components is a pretty common occurance I'd imagine
holy shi?!?!?!
it's works as infinite sum of fractions
jincao tea isnt sellable in outpost?
not now at least

anybody got best blueprint for wulong currently? Mine can work but it is slowly depleting my ores, i want one that is sustaining and wont make me run out of mats
credit to starficz for the loopback tech tho
The offline lag bug is scary..
This afternoon all works good..
Just login now finding almost all my orig mine not working even water supplied normally..
Luckily the orig stock still have some left, not emptied yet..
Need to dc the inlet outlet then connect it again to make the mining work again..

When will this ore be released??
Probably you these mines need some water buffer in them?
this actually work, no more clogged even offline KEKW it also emptied my sewage tanks.
the offline clogging is a bug problem, let the devs handle it
nah, I can't w8 I fix it thru sheer will.
yk theres water here
the 2 conduits and 2 fluids (so total of 2000 storage) are still zero. lets check if how many will clog daily
I don't like the pipe in Endfield. It have feeling of inconsistent.
What's the point of using water mining rig on ores other than cuprium?
use less power
Yess.. Me take there coz faster after replacing the one below it with hydro..
So one time travel..
Reasonable.
i personally have zipline going to the rares so i just put water pump and conduit there easy
If you replace all old rigs with water ones it's at least 200 power saved
Just doing it like this..
ive been observing the offline clog for days now. all i could see is that the liquid xiranite is the one that slows down. thats why the sewage keeps clogging in the crucible.
Oh thanks for the reminder i still need to replace thos in jingyu too
Yeah i used chatgpt lol
my braincell shriveled
Do you know which belt is slowing down? Priority flow does prevent the clog but it won't prevent the slowdown from happening
Tbh with those insane 3200 power batteries I personally won't bother replacing all old rigs with new ones
oh so it's just a lim function in math
That's more reason to do lol
You dont want to waste them
yeah
realized all my node spots have paired up
scuffed ahh 13/min should yield 1 comp per minute
I mean it's still theoretically impossible to get 1/5 but you can approach that i guess
im sure its not the xiranite belt because we have no issue when making LC battery before. the problem starts when it starts turning into liquid xiranite. lesser liquid xiranite, more sewage build up.
I believe we'll get even more powerful ones (to match 3 types of valley's), and I don't wanna min-max every bit of my resources anyway
im doing 1 pump per 3 mining spot instead of this, js to futureproof when we get all high purity node
truly blursed if i do say so myself
future proof. yeah...
also jingyu is maxed
Currently you only need around 8 batteries/min for stock bills. Components are also limited in how many you can use a week by catalysts, so spending more batteries on power up to a point has zero impact
isnt it just about to reach maxed
Hmm, I was hoping the belt in question could be pinned down. If you just want to avoid the clog, use priority flow. I'm not sure how you could test belts without knowing how the sim runs while offline
so rdl 11 isnt max?
12 is
8 is net yield correct? So if you're using 2 thermal you have to make 11
we're talking abt mineral purity
Yes, but 6600 power is also very hard to use. As I said, more power up to a point has no cost
kinda
so in a sense, jingyu is maxed purity

satisfaction
balance in all things
unless my math aint mathing, a single fluid pump is enough to power 3 of the new hyrdo mining rigs right? even at max purity
1 more defence building, light warehouse or zipline and here comes meltdown lol
yeah thats the base one
We're the same
ITS FINE I ONLY NEED TO DO THE DEFENSE LIKE ONCE
3 hydro mining for 1 pump is minimum ratio

What did I miss to increase Wuling RDM7 to higher level?
theres a new recycling station
make sure you level your outpost, your stock exchange and your monitoring station
and then mine all your cuprium
behold the cursed ahh 1/min of both components
@marble yarrow everything in maxed v4 is high purity, wouldnt it make sense that maxed jingyu would also have all high purity?
exactly
Can someone tell me how to unclog this the reactor is f
but thats the thing, theres still low purity nodes left
plus, realistically how much would it take you to configure a mining spot if purity changes?
outpost level not high enough but maybe I should recheck again
Enough water?
future proofing they say
i could configure spots rn by purity but i dont want to do the extra work later
lmaooooooooo
bro ๐ฅ
click on reactor
so much smaller. totally didnt force tangtang's crew to process resources
Hmm weird, something with filling unit then
whats in the filling unit different med?
it looks like you're trying to make 6/min yazhen c? but there's not enough ferrium to sustain that
deficit of ferrium leads to excess of fluid
He has ferrium
the top ferrium parts isn't saturated
But filling unit isnt working
cant wait for 1.2 where the outpost gains some culture and accepts jincao tea
then i can cut the yazhen planters
It is, the belt is just too short so dont see it moving
well, it's switched off
I have alot of fer
turn it on
Wtf!
oh, lmao right 
Bro there's a text saying it's off
Thanks guys! Omg

kekw its off XD

they no need power just water the new mining rigs
game just decided issa me, mario. disconnected my hidden lines for whatever reason
Did i miss anything?
well i use 1 for 4
yeah but people doesnt like to go more than 3
most of my spots, i use 2 pumps for 7 nodes
you really like to do extra reroute later...
its not like you reroute it later
using water pump cost more protocol safety right?
you just add pump in the spot when purity increases
plus i dont like lazy excuses
๐ญ
unless they give me better rigs im not )
what else you gona do? we making our own content to balance things out
ill just enjoy my free energy
non min-maxer hate this trick
actually its ok if people have 3400 usage or below
fuck u, unAICs your AIC
yea i let my factory rest because im a good corpo
for little power use no sems worth it replace the rigs
i feel so proud of myself for figuring this out
i wouldve never have had this much fun had i copied a blueprint
its ok for u
not for me
Peak
meanwhile, some of us are looking to plug gaps
whats the max production this patch?
the 999 ping is the cherry on top
0 comp: 12 SC / 6 YazA / 2.75 Yaz C/ 0 CumpriumComp
1 comp: 11 SC / 5.5 Yaz-A / 3 Yaz-C / 1 CupriumComp
1.5 comp: 10.5 SC / 5.25 Yaz-A / 3.125 Yaz-C / 1.5 CupriumComp
2 comp: 10 SC / 5 Yaz-A / 3.25 Yaz-C / 2 CupriumComp
3 comp: 9 SC / 4.5 Yaz-A / 3.5 Yaz-C / 3 CupriumComp
@marble yarrow btw i dont have the clogging sewage described earlier
me too
all my conduit and water treatment have literally 0 sewage in them
they just go directly i guess
is there any point to looping the waste back onto itself or nah
maybe because we are doing not 12/min SC
Sewage clogging is due to xircon/batteries dropping below maximum capacity. Capacity being based on your design, not 12/min
i'll not change my 1.5 component to see it for the coming days
just design better
chen approves
unrelated but ive been watching cinderella gray lately
That's what priority flow is lol. A better design that doesn't have this issue
BP for the 3 comp
im not into the agenda
I'm a for-profit factory worker, not for-operator
this is the only thing i did with my sewage and i have no clog
pretty sure this is just regular ratio splitting and not priority flow
6 treatment on the right spot is all you need
How much sewage are you feeding to effluent and what's your maximum battery production?
its ok theyre just trying to promote their "better" design
these are my sewages
22.5/22.5 between conduit and water treatment
12/min but im doing 10.5 rn
Priority flow is better than a naive design, but it's not the only design capable of handling sewage priority
Closed loop with partial priority also works and I'm sure there are other solutions too
I wish they made Xircon ineffluent a fertilizer
my factory doesnt yet fck me up so until then its just imaginary enemy
If you have it set up to split sewage for 10.5, then that is your maximum. Only dropping below that would cause issues.
spraying my plants with Xircon ineffluent would make farming way better
i mean thats what im trying to say
we have our own agenda about our design
priority flow isnt necessarily better when other things accomplish the same thing
replacing water with xircon ineffluent
if there was one "better" design then there wouldnt be a billion blueprints out there
I'm only claiming it's better than a naive design, at least for raw output
I removed all my sprinklers
The advantage it has over say your design is flexibility
I want to try using more compact designs, but my OCD is forcing me to make it look good
Yes
fuck ts
Doit
never planted a sprinkler ever since
priority design sound good if we prioritize something? 
lmaooo
shut up dark kermit
forgot eco farm existed 
I use eco farm to make fluffed jincao and jincao infused
The reason I ended up with priority flow is that it handles any level of battery production without manual control
join the darkside
it heals a low health op to max instantly
I can adjust my component/battery ratio whenever I want without also tweaking sewage
what eco farm? (I knew it exist but ughhh)
If you don't mind manually controlling sewage, that absolutely works
i only live for the batteries
i actually just put a relay switch around it and turn on every once in a while > water and i move the switch
a motivational message for today:
If you find yourself struggling to work within the set size restrictions, remember that this is a you problem, and efficiency can always be improved.
go make more comps bro, those batteries aint going anywhere
turn that shit up to 6/min ๐ฅ
they gonna be full someday
close enough
put them in v4 depot ๐
almost enough for 1 set
i made some of my wuling battery and component in V4 because i moved so much stuff over there during 1.0 during preparation 
Iโm going to rework my sub AIC some time this week to do 4 furnaces, 2 xircon and hopefully 4 cuprium ingots
theres an item control port here that increases cuprium input (and sewage output) for that
3 is permissible but 4 would be nice
i have a bunch of item control ports everywhere working as switches
I dont really bother with fully cramming everything for now. were gonna get new stuff to build in a month
what does that even do
replacing Yazhen C to HC valley using meta storage 25/m dense ori. if 2/m is real I can replace this to occilation of power instead of SC wuling.
Probably we will have to rebuild the factory next update
Ill have to filter the xiranite to pass through a protocol stash in the event I want to intercept it for components
cramming or not, rebuild
item control port for SC batteries xiranite input to increase from 10.5 to 12, and also increase sewage use
definitely, will changes again cause there will be two new area which is one is a outpost.
Cramming makes me feel good
go nuclear on the AIC
so for flexibility, i literally just click a button on both control ports
I made my V4 sub AICs all do one buck capsule A and process steel at the same time
i just did one buck capsule per aic and then 18 batteries on the main one
LMAO... I like this clipping
Priority flow requires no manual input at all, which is why I like it. If you want to use a manual control, that absolutely works
cursed
fcking pipes...
blessed
Do not fuck pipes

Pipes are great
even if u automate the sewage, you still have to manually control the ore/xiranite inputs so ๐คท
installed pump on the other side
I tested a priority flow design for yazhen c, to use excess ferrium from battery downthrottling
It was a huge mess of belts
I have that extra 30+25 ferrium output that I donโt feel like doing anything with
I really wish to have Factorio circuit in Endfield
Having to use belt wizardy is just pain for me
I would love arcospheres in endfield, that would be amazing
Linear algebra solvers are always so fun in factory games
1 cm worth of clipping 
Iโm comfortably at 3.3k power usage and I think adding a Yazhen C would take me to the next tier
Cannot wait to see some meltdown
pipes coming out of the rock
water from the rock from the bible modernized
The funny part is that linear algebra solvers are wildly overkill for arcospheres. A basic balancer is enough lol
We're plumbering like mario here

making sure that pipes can clip for 1cm height difference
How do you even place that
holy
wuling is beautifull
that's gilberta
she photobombed me

sure... she photobombed you....
its beautiful
bully
the child probably deserved it
plus she had to let off some steam after lae smacked her
somewhere out there someone saying "no, that should've been me"
any advice to reach world lvl 8 ? im stuck at lvl 7
we doing hill billy stuff with our pipes
outposts, mines, upgrades
Environmental monitoring station
penguin compels you to do everything
do it
ok in need 70 points to reach lvl8
hill billy perlica request you fine fellow to spend your well earned trade money as tax for upgrades
only this ?
I wish Android players can install these
still broken in 1.1 at the moment
Did you get the stockade recycling stations
Damn
KEKW
full upgraded
And the delivery depot upgrade?
I recall managing to get to level 8 without level 3 sub AIC
tangtang approved
how do you even get up there normally
oh thxxxx
thx u so much, im lvl8 FINNALY
water stairs and some ingame approved parkour, inside the main building
Me when someones request made it obvious that they don't read the tutorial, not even the database version:
How about read tutorial then forgot about it? 
.cantread
naruhodo. (not naruhodo it)
i read none of it. just clicked to clear off that annoying dot
Nice
damm. I gonna love this combination if the result actually work. right now is working fine. I let this run until tom. if it does work.

I just did a tangtang/ch'en moment
"gacha players cannot read"
factory layout looks like a mess, but i think i got it
install mod 'ability to read'
Instruction unclear: installing more gachas to play
Hmm...
so apparently, the problem with "leading" sewage through the 1st reactor to the 2nd one is that if there is a problem Im unsure of, it will automatically creates xircon + xircon effluent in the first reactor and clog up the entire thing, usually from having liquid xiranite running out
I don't know where I need more water 
moar water
Isnโt this wasting 30 ferrium per min?
Finally, you don't need to keep the cuprium component farm on much since you will artifice them with Xiranite one that are cheaper right ?
i suppose, but i'm unsure of where to use it and i've had enough staring at topview for now
You can meta Originium blocks for easier Xiranite Components 
Why Xiranite Comp tho
For gear
no, like, why not Cuprium
Because then you need to do all the liquid management 
Cuprium gear is very limited right now, so we don't need that much of it.
Is there any way to fix "this placement is restricted"?
worst for me. XD
anything is safe to copy so long as you dare
I'm copying it then
I have everything they used
Well for the water just do this
One pipe can actually carry 3+ water per second
Mixing it together like this improves the water output
2/s is pipe max 
2 water / second is max throughput
but don't mix two waste on one water treatment
you can get 2 Cuprium Comp per minute with like 10 SC, 5 Syringe A and 3 Syringe C production
I left 2 cuprium part production for 2 days already 58K lol
I'd rather make more batteries 
my c-component is very little producing but overtime it will be huge.
If you're doing that line you have enough to empty out the Outpost, but oh well, each person to their own i suppose
pwm but for cuprium component
I can sleep well with this again.
nice
the fact that ya'll have spare materials to consider HCV batteries in wuling is insane
you love getting it?
YO
not for long :3
virgin conduit users vs chad visible pipe enthusiasts
just wondering if worth set up zipline there
Its one zipline on the bottom
I mean I put one to the top of the wheel for fun
with 20 slots, sure why not
i made a test for offline clugging bug. and my primary suspect:liquid xiranite
for now i only set up the test. ill go offline later
i hope it works
u mean here?
yup
that's true but it ate up power but the battery is spent anyway since I am not min-maxxing my battery usage
so far I have a 5 zipline network from the nearest TP point to there
I wonder if I could bring that down to 4
same count on mine
Just realized I've been living in the stone age 
hard mode enjoyer
cutting down by one
There's actually a challenge mode in Factorio where you can only build in small area block
that you have to fit your factory
I wonder if HG do event like that in AIC
Doing alright for now. 
Guys there is only 1 sub PAC in wuling right?
yup
yeh
1.2 is the next one
Yep, for now
can't w8 for april mid. I want my Mi Fu right now.
still contemplating about Rossi
I want more AIC stuff so I could finish building it and never go back 
well She's Physical and Heat abilities
I'll have ptsd after Wuling
LMAO
Rossi squadmate perhaps?
Am not sure yet but She's excel in Vulnerability.
busy building every char available, forgetting i havent trim re-crisis
The hell are you supposed to do to optimize smth bro, my battery line already takes up all of the depot bus spot
Tbh when I first saw Mi Fu I thought she's electric damage :/
she's emotional damage
what do you think She will be?
Squeezing everything as tight as possible, then crying because you can't understand what's doing what
Am going to loose it if She's another Physical
how do i click on a transport belt if a pipe line is coving it in top pov?
Leek Gurl definitely a electric
Final, zipline count 
sadly, you need to dismatle the pipe 1st before conveyor
Either you can't or through belt building mode
Tbh I do that but I see people using every space there is on the aic
Then I feel like a dumbass for not realizing what I'm doing wrong and am still is
Click the bulk mode and turn in the simple view, will make pipes dissapear for example
i highlight the section using click and hold, then double click to select and unselect the whole pipe section. i would be left with only selecting the belt
you go normal view mode
I personally finished building Valley factory with 1/3 of one sub pac free and no resources left to process except amethyst
SC & LC Bat
probably better you try have spacing between some machines first then you cramped it after you done?
whats the max originium ore yield at wuling for the current ver?
58k
that max storage
480/min rdl 8
all this for a battery
raw 480/m
Dont you like it ?
Also that looks nice, You dont want to see mine XD
I am on the side of using sub PACs for processing ores and some other materials and then finishing all crafts on main PAC. But Wuling hates me and my ways :(
took me forever to make it work
But does it not feel satisfying once it works?
also you can proces the xiron affluent outside AIC area
my soul feels healed
gonna have to check again as it seems, only have 390/m and deym im using 540 every min
mine, it's like jenga
@outer bramble You dont believe me?

you probably miss a node. or its not powered.
Yo guy u guy got optimize battery usage blueprint? for 4.5k usage
I really wish that we had 1 more slot in the crucible. This isn't stable enough. ||Also, it's at half efficiency anyways since it definitely jams if you feed in the xiranite without the splitter||
i believe it but still find funny for whatever reason 
You dont have the ammount of slots you need to do this efficiently sadly
Imagine being able to flip input-output sides too
NGL, biggest complaint about the factory is how it truly hates giving you enough resources for doing the outpost supplies and one other production line, just a single extra cuprium unloader for the cuprium components at half efficiency is just too much for the resource supply to handle.
They gave us a reverse flow button for the pipes but not for the conveyers.
I believe you should just let components run for some time, top-up your storage of them and turn off, solely grinding trading items after
I think so too
I destroyed my xiranite components crafting at 48k limit and since then barely used 1.5k
I need to start producing the new gear and Xiranite gear again
turn on/off some of factory production is quite annoying
I have 40k too and my problem is Bills to craft them XD
Especially if it's a huge supply chain after them
right
Everyone's problem, mate. Wuling is a land of broke people.
I get that that's the only workaround we have for now, but the factory feels so stupidly limited in what you can do. If I want to make a production line for something unrelated with the sky flats, it will start slowing down my game progression. I don't want to have to choose between progressing my economy and having fun. That shouldn't be a choice.
erm
did you guys use different pumps to extract cuprium or just one
space and unloader is quite premium
unless that zipline is for the rares in the cave
which i just fkn hate lmao
they put BOTH qingbo rares in a fucking cave
how are we supposed to zipline now
3 pumps for that large cuprium spot
that one only needs 2 pumps
one pump can feed any of these combinations
3 high purity
2 high purity + 2 low purity
1 high purity + 4 high purity
6 low purity
this one?
ye
cause like. i gotta use different ones
im prety sure you can do it with 2 pumps no?
splitters? yes
yes you can use the convergers & splitters
convergers and bridges also work as normal
Just drag them into your hotar
weird. idk how though
It is a problem indeed and I hope devs will do something about it in the future. For now even 1.1 version feels like same 1.0 without much of a gameplay changes (not including wonderful QOL changes). They had planned a lot up ahead and changing stuff on-go is hard.
Yeah, these ziplines is for the rares in the cave
facility list > logistics
thats crazy but no thanks lmao
Ofc in the caves smh
And atop the giant wheel
whats the new best wuling aic loadout?
actually i hope the blight floods into the cave sealing it forever
fuck the qingbo caves
yeah you're right actually, I got confused with my main PAC which used a different amount of pumps
I will kill you
Nope
Let's pile up originium there and grow nice crystal walls 
Also i decided to use the farming spot
Too bad the blight is not flooding in these caves for you
ty i was a little confused over there
also, with the latest update is it possible to make extra stuff at the sub pac at all?
U can fit everything inti main
Otherwise u can just put something in the pac if u want, sure
Depends on what you wanna put in there?
Here is my Wulling factory
my yazhen minus 8 after 2hrs logoff, why HG WHY
:)
๐
i dunno extra stuff i can sell for stockbill ig but when i look into it its almost impossible to achieve with limited resorces lmao
I am quite new to HG (and Arknights at all), are they usually good with server-related stuff? xd
U can easily outsell current wulling stock/h as is
Is these ziplines in the middle for fun?
don't ask me, i'm new to HG as well
babe what do u think abt my subpac
They are both so i dont need to take the shit elavator
And to get to the very top of the big waterwheel
I personally would recommend to put originium dust things production there and free some space on main area for something
Disgusting
My subpac is my glorified powerstation XD
all it does is feed a singular batery
Any1 think that with all this fluid stuff now we should have LC, SC, and HC fluid tanks with 1, 2, and 3 inputs and outputs, respectively?
Sub PACs are quite small to do something big
theres literally nothing in it ๐ฅน
Smol
I see
Feeding originium?
Literally execution worthy
in the end i decided to use two pumps
๐คท
Dont u shrug me

ahhh how i missed running 5 kilometers to place several repeaters
nope i wanna make 1.5 comp
does stockade have its own subpac for electricity main source?
Nope
nope
make 0.75 of each comp
how do you even power the new mining
Probably I could make 1 more battery line but I still yazhen syringe [c] for outpost 
You get power and power up pumps?
Like always
from the jingyu valley sub pac
yo
all the way to the stockade

like our glorious supreme chief wishes
Still not even close to Aburrey quarry vibes
to be honest aburrey quarry is way worse lol
timestamp to see if it decrease again tomorrow
I HATED THE QUARRY
the stockade aint even that bad
i could do that too
just have to find a way to reduce my power consumption
Actually that area between Power Plateau and Science park was way worse
delete the sprinklers, delete syringe c
i think i can hit 3.6k if i do hydro rigs and turn off some facilities
You either go through cave or struggle through thin area
you havent done water rigs ?
do that now man
might disconnect while im in the middle of it lol
200 power saved at least
uhh any way to mine these here?
Nike: Just Do It
Use water inlet and outlet
use conduit if you don't want to use long pipes
does your product down stream changes too (powder, bottled yazhen etc)? it always happens to me when other parts of my integrated plant have excess
Water conduits
Here is my solution
noting this down
But I personally made it with very dumb pipes that are for some reason able to go through the ground
Ok, i am back here
Guy.. i want to ask..
yeah, for usage though since they use less, yield for productive items not changing if i use depot
Do we stop using ferrium
I stopped even checking them since I got all I need for weapons, now just blindly etch
ferrium goes to t2 batteries now
Cause yahzen syringe A is using cuprium?
For new one yes, but ferrium is used for making xircon, thus new batteries
But only need 1 dust right
Another screenshot for you
oh i see, im also doing the simulation for these conduits hold on
My aic barely can fit the crucible x.x
Why the heck we need like 6 crucible
does your offline graph dips from time to time?
you can also go like this, you dont actually need power next to miners
By the way, what's now the most optimal trading material output of factory? Because I'm sitting at 12 old batteries per minute and 6 new syringes. Also 3 new batteries but the are used for powering up system.
Oh, that much easier
One sc battery is 3200 ๐ฟ
9sc 6syringe? yeah that still clears outpost bills
How's the 2 Comps layout doin
12 new batteries
i stopped coz im doing other things 
Why are u using 3 new batteries bro

They are 3.2k each..
I mean I have 12 SC batteries (1600 power ones and they're not used) and 3 for 3200 (they are consumed by factory)
Not 100% efficiency or sum
bruh
oh yeah i forgot how much fun it was to build in this game
almost 5k energy usage
do that until you are level 3 outpost
absolutely not, heh
What
Nice, thanks
Is there a hidden formula for sewage water?

dont create new battery if you are still level 2 outpost
I love to have cute little 1.6k energy free
You know, easing the bills of Wuling citizens
Or you can only get sewage from cuprium?
Hella wasteful
But, you do you
From cuprium and xircon
only from copium and as side effect of xiranite t2 production
Basically you can loop the xircon production with its own sewage
No hidden one?
not as im aware of
which also means that if you max out the syringes and red gear mats, you wont be able to produce t2 batteries
More than that, I know. Will do better later. Have a huge headache after dealing with pipes all day 
Do red gear need xyranite?
it needs corpium so you get sewage from it
ie,. you need to keep processing corpium to make t2 batteries, even tho they dont use it directly
How many copium output can you produce?
120/m or 4 belts
Development 9 don't increase copium?
no
It's limited only to parts, yeah?
yeah
*cuprium components
They do yes
though my outpost still in level 2 so I don't know yet
Unfortunate. But since you preferably not need syringes you can trade them too ig
yeah, you just need to sell red syrines so that they dont overflow
4 skyforge how many xyranite?
120/m
120?
I think so

2s for xiranite process
4 wulling battery x.x
basically, the math currently is, you can make 1x t2 syringes and 2x t2 batteries, this eats all xyranite, originum and corpium and leaves 1 belt of ferrium unused
if you are going to make gear mats, it will need to eat into those
pretty much
pretty much
Bad news the new crucible eat alot of effing space
one belt of ferrium can still make yazhen C if you dont wanna waste it
not really bad news we have space anyway
you can do some nifty setups with it to save space
but there is way too much space anyway
Can you trade syringes for both components production?
i alreadt collected my initial set up
Or can you?
time to go offline
you probably can but why would you
I guess you can through many many conduits connected together but why would you do that
just move all sky forges to outpost and make rest of stuff in core
