#aic-factory
1 messages ยท Page 239 of 1
ive been wondering this for a while, why does a Protocol Stash base item need an exit port? can you set it to pull things from depot to put on a conveyer belt?
exit port just an extra
thats sooo weird though, be nice if it could be a portable unloader
How many mining hydro rigs can 1 pump manage ?
tfw
you can place item control on output to control what you let out
It took me 2 hours to fit 4 forges in this tiny space

the ratio miner pump is 1:3 right ?
Yes
you can set it to storage mode, and make it like a temp output for max 300 output in case you forgot to come back and turn the auto output off. I use that to make xiranite bottles sometimes.
depends.
high purity consumes 1/3 of a pump
low purity consume 1/6 of a pump
mix and match to achieve a total of 1
and you need more space for plant factory on other place as well
guys i forgor, conduit can take up to 120/min of liquid sam as pipe right?
FINALLY FIGURED OUT MY AIC BUG
or just use 1 pump for 3 miners and dont worry about it further
2/s = 120/min
yes
Same like me before implementing thr hydro pump..
this applies to anything you don't want a production line to be automated
Does anyone know or can link me to a 1.1 LC Battery and Medicine Wuling Factory?
All the ones I find are either 2 Forge LC factories or 4 forge SC Battery. I can't see a 4 forge Lc battery and Medicine facotry.
yeah, thats the minimum
rate my abomination
@marble yarrow 1 pump can power 3 rigs right?
2/10 not enough pylons
rigs meaning hydro?
Yes
use this:
high purity consumes 1/3 of a pump
low purity consume 1/6 of a pump
mix and match to achieve a total of 1
I seperated the xiranite production just in case
Where do the sewage pipe goes? :/
tianshi's office
Aye thanks
My xircon was going into the packager on odd seconds so I would lose 1s of time consistently. This led to my power being 1s slow every time a battery entered. I waited till the unit capped on zircon to perfectly align with the timer and it finally runs smoothly
๐ ๐ ๐ ๐
so you can:
3 high
2 high 2 low
1 high 4 low
6 low
to Zhuang's office 
Got itttt
man, thats kinda nuts for the new battery, are they even worth it
i still have to fix the sewage part
just wanted to mess around myself for once instead of going straight to blueprint
Note that this only really matter if you canโt get it below 3.4k. Once you drop below it you donโt have to bother being too optimised
you are forced to do it if your outpost is level 3
the outpost generates more than double bills than level 2
so you chase it
it's just a byproduct for us to make better meds 
unlimited power
I got my setup to fit in a 33 x 62 if you want it
Asia though
Itโs a 12/min
They are needed to fulfill outpost's needs
max efficiency ?
Mhm max efficiency
if you do 12/min you cant do new components though
BUT IT USES BOTH BUS DEPOTS
more power, better trade offer
THATS THE ONLY ISSUE
yeah i just set it up for this and left 1 spot unchanged
Thereโs a pool of poisonous water, what do I do with it?
im below 3.1 k
drink
Water treatment
Mine is 53 x 27 pretty proud of it
Thatโs only half of it
Mine is 33x62 12/min
wdym ?
2 separate lines
pump into water treatment
But I have external Sandleaf, sewage and xiranite production
This is what it looks like but doubled and rotated
I'm pretty sure it's as efficient as mine
So itโs 2 parellel but 180% lines of battery
We need flex channel....
The other side is from the other line is the thing
The full line is straight
The other side of the depot is the mirror parellel
btw i like splitting SC by depot unloading xiranite and dense origs
hmmm...

OOOOOOH I SEEE
You reuse both actually
Only need external 60/min
Then both internals produce 30/min each
okok I see the vision
@marble yarrow how did you do your conduits around this mine
that's originium ore, you dont need water over there
less power usage
WAIT YOU CAN USE WATER DRILLS ON EVERY ORE ?
yesir
Bruh
just not worth it on 2 ori mine
i took some before it went before the conduit
and it doesnt cost energy
dont mind my long pipe
I'm gonna redo every mine in my world then, thank's guys
Hereโs my setup after stitching
uh remember you need fluid pump and pylon as well
Something that just came to mind but it's something I'm curious about, is there anyway you can mass clear your aic base? If you wanted to start over with a different layout?
My wuling bases are both pretty packed but I'm having different ideas of what I want to try
hydro mine saving
Bulk select and ctrl + f
Isnt it better to use one depot core in the middle than use 2 at each end?
This way ur depot sealed no?
Need to edit to extend for other use?
If only one in middle, the other core can be place at other places for other need?
I would but I wanted to run a Sandleaf powder between them
You can do that if you shred the Sandleaf externally
How do i start my aic progression in wuling?
Get a forge of the sky asap
Thatโs the most important
I already got that nd also maxed 1st layer of aic upgrade for wuling
Ok then produced LC bats until you hit lvl 3 outpost
Get forge, make xyranite..
Mine all the ores coz its the base of production..
time for some crazy ass pipelaying
Is that the purple battery?
Use wuling pylons coz its auto connecting..
A lot easier to progress.
Yass for now.. Mk for origin, mk2 for ferrium..
annoying ahh new battery setup of mine
New greens
For the 2-nodes only, why dont use the regular mk 1?
Ohhh
i can optimize it but im lazy rn
Tbh im kinda stuck in a rut after starting wuling
hmm you could definitely optomize that, make it take up less space
I dunno how i did it with valley 4 but i feel like it's harder to start in wuling lmao
ye ik
but it doesnt matter because u can only really have one of the new battery setup
We need to have HC wuling bat to talk about optimization 
well technically 2 but u already use 1 grass for the disks
is thsi tuff
and left 1 out for the powerlines
im at 30 mil
Doesnt laeva get 3 bonuses at refugee camp?
Anyways thanks @pulsar cypress
due to how expensive the new battery is + how strong it is, u shouldnt really run more than one setup for this lol
I put gilberta and yvonne on 2nd and 3rd camp, both get all 3-bonuses
Place lae in refugee
yea
ok its way above head level. non-intrusive
am i the only one or for some reason i aint getting 480 yield ๐ฅ
Do pipes flow in a certain order?
Im trying to make sure there's no blockage.
Pipe of sewage -> pipe spliter at reactor crubille->pipes continues to another pipe splitter at 2nd reactor -> pipe continues to water treatment.
Assuming the reactors are 90% operational will they still get priority on the sewage while the rest are treated?
i had to cut down originium usage since it was being used up
im alr wuling lvl 9 btw
Missing some nodes probably
it will always split 1/2
bro, i went around all of wuling to check im using mining rig mk 2 and did in fact use all mining spots ๐ญ
I want to rework both AICs so bad, but my outpost still at lvl 2 
that sounds abotu right
hmm i still think it will be fine then, oh well gonna test it out and check back in an hour to see if my aic is messed up again ๐
@quartz sinew Pipe works like how splitter splits the flow
uh wrong ping?
Oh what
Ah sorry, accident
yh nws haha
Or just not powered rig probably
how do you split this
ts the only spot i didnt touch
so i have 1 xiranite being split into 3, so 1 reactor crucible will be making less liquid xiranite which means the reactor cruible that takes liquid xiranite + sewage will be backed up by sewage
so I hope adding the water treatment to the sewage piping will solve that
Yeah there
whaaaaaat ๐ญ ๐
Smack the fake wall
r we fr
Yeaa.. There's ore in there..
If you branch out into 3 pathways with a main and sub branch, the flow unit distribution will be 1/s, 0.5/s, 0.5/s.
You can imagine that distribution with the splitter
peak
Anyone have blueprints?
pump 1 = 3 high ferrium
pump 2 split to 2:
1 path to splitter of 3 low ferrium,
1 path to conduit
Endmin lore accurate gameplay: send pipes everywhere in wuling 
aight
ok. i think im done. no idea what else i could build
piping in this day and age of conduits
erm ok... that area i was onto, is that a quest or
Nope just fake wall
Smack that thing 
free protocol capacity is real

There you go
normal xiranite components?
ty btw
i have like 70 originium/min left to spend and nothing to do with it
Eat it raw or sniff it in the dust form

good idea
Youll gain art power 
You shall truly become MC
Isekaid 
would endmin grow if they ate raw originium
Time to find out
cinema
For the love of 20 power, its the same as using 2 of mk 1 rig 
maybe thats how the thing in the trailer happened. they ate too much
But you still need 1 pipe
Every little changes just to save power
๐ฅ
what 1 pipe
Already spend more than 12 hours today, both the whole story and some factory 
The origium package needed for Xiranite comps for when you need them/fits in deliveries too
That's 7 nodes, 2 pumps is 6 pipes
Nani? We cannot discharge sewage into swimming pool?
nope
yeah... i guess i could balance the 2 component types..
my plan of turning wuling into india failed
Nope
๐ฅ
There's 1 made by the dev in the new map tho
With 800 sizes
You need to clear it to get the chest
Really?
its working. lmao
What... How
Is it because when the pipe becomes too long, the storage inside the pipe still count as 1 thing?
Like real liquid mechanic
7 spots
4 high 3 low
1 pump for 3 high (1/3 x 3)
1 pump for 1 high 3 low (1/3 + 1/2)
Oh i see
yes
Hell nah
ok so all my wuling mineral nodes are hydro-based LMAOOOOOOOOOO
When wuling reached lvl 12, it'll become a problem again tho
Every nodes will be high purity
Yeah you gotta redo them when next patch drops
reduced energy for the rest of the patch? great
Bruh 
It's fine i can accept 10 more power
means i can store so much SC until next version
this is the endfield endgame that have been promised 3000 years ago
Just to emptied the only outpost 
Yeah I was gonna say this is optimizing for the sake of optimization since the outpost caps our income anyways right
soo ! they updated ๐ we cant put depo outside any more ! good thing the ones that already are ! remain`s on the same possition ๐
Yeah just for the optimization
Must be under 3400 power usage
what is wrong with the naming system of this game? i shrunk the name of this blue print down to a single letter and it still says it contains prohibited characters, started with "Xirinite Dry Plants"
Considering the sewage treatment requirements
is there an easier way to connect all the hydro mining rigs like i used two fluid pumps and converged them to provide enough fluid to all hydro rigs or can u use that new underground water method is that better
most hated thing
This is so peak
0.5/s treatment for 50 power fuk u mean
I'm comfy at 4k lol
can u use the underground fluid inlet for hydro rigs
I'm at 4.49k 
Next patch they introduce the new fluid thats gonna be made from literally doing anything and takes 17 treatment plants to take care of
Btw news for the unemployed
u can no longer put an item in the 2x2 conveyer loop
I predict
it actually just remove the item downright
dont worry about that, it takes 6 seconds to mine the rock and the water pump puts out 1/sec so just 1 pump can sustain 6 mine spots
is it possible to use up 100% of the cuprium bottle and parts?
I have a feeling one of them is gonna eventually reach depot cap and then the battery production dies . . .
He powered defence tower with batteries probably
Even with no Ziplines it still too low
Oh has anyone tested how much the SC wuling gives in a turret
31 zipline (some are unpowered) like 2 or 3
idk why but mines wont get enough after using splitters so used two pumps
50 lasts us like 10 years now trust
like 5 out of 6 rigs work so i need an extra pump
Mine is 3.3k so not far off tbh. Just deactivate some of the useless stuff
How do I connect these to the pump?
tab ->z -> resource tab -> pipe splitter if you need those.
else just press q and pipe
Question regarding the hydro rigs, Are they better than the regular mining rigs or should I only use them on cuprium
Press Q lol
You can put pipes outside aix area
i am not joking btw
the ones from prev ver will still exist so keep it as a relic
uh i jus oriented the input header of each in way of pump then used splitters and stitched together
i was under the impression that the new underground inlet thing does it better but i alr did mines
Where do I access it, I'm using mobile
tragic
well, i just did this
now
wut
then why is it blocked in my side
imma record
what area is this? wuling or valley 4?
I need to stop with making tiny ah production lines
wack ahh bug
wuling
how is it so low? one wuling battery line is what i use for power and it gets me to 6.2k power
i use 2 HC + 1 LC wuling
is bro using the 2nd tier battery
this is my wuling power
o
just make an SC battery setup
i use one tier 2 wuling battery and one blue battery
oh shit how do i dispose of sewage im not gonna pollute the river am i
water treatment unit
also u cant dump sewage water
the benefits of overproducing before 1.1
water treatment unit, gotta keep environment clean
damn i was going dump it
i cant discharge no more
i wonder how much more tier 3 qinbo stockade produces
do i even need all these batteries
not really
Definitely can get it below 3.4k
just have one good line for power, rest to sell for monies
nah im too lazy rn imma stash it then put it back on boom sewage gone
i use 900 power even without the factory
Changing all the old rigs to water rigs save you at least 200 power
Delete syringe C production too
It's not really needed
do you use 4 thermal banks at end of your battery feed? banks use batteries over 40 seconds and each battery comes out every 10 seconds
i just load them up and set up banks somewhere else. outputs are not a problem in wuling
yeap thats why your power is so low
Wut
where do I access pipes?
before 1.1, i had 2 battery production lines, 1 for power 1 for sale, everyday i got 20k batteries to sell. also had a line for medicine for more sales
?? you had 4 power banks going out of 1 battery line?
Lmao sorry didn't notice
thats so many wasted batteries
On phone you need to change to aic mode
Press tab, u're still at explore mode
Tap top left
Or if u're on phone yea, tap top left
Then Q
no thats how it works, 40 seconds to use a battery and packaging unit can put them out every 10 secs, so you can use 4 banks and the power stays consistent, i never drop below 6.6k power
It's not consistent btw
yes but you can also have 4 outputs. 3 going into a stash and 1 going into a power bank
it is, my power never drops
you dont neek 6k power ever
It's consistent on paper, but it is not in practice
yeah, when your online
is it possible for someone to make a sewage blueprint ts sux
i have the same setup in valley 4 and it has never turned off
I missed the chat
What paper r we discussing here
thats the best part, i dont need more power, meaning for the rest of Wuling coming out, i can just add, never subtract from base
sure but youre kinda wasting resources
its future proofing
as long as you outsell outpost
i dont think he is. burning half of his battery output
What's going on here
but me? nah. i'll store extra like crazy
if you ever go offline, your belts get fucked and you lose a very small amount of items, you can see this when you just log in the game, switch aic reports to 1 day or several hours you'll notice the yield is lower than expected
Dat's true
What's wrong with that?
Is someone using too much thermal banks or feeding too much?
can fluid output units dump liquids besides water? because that would be so funny
wuts the point of making sc battery u can't even sell it in the outpost rn
yazhen/jincao/xiranite
that is so incredibly minor
If you click on a fluid it tells you if that is dischargeable or not
you need to level 3 before doing it
oh 
can't pollute Wuling with my copper waste water ๐
Lvl up outpost pro
*bro
First thing I did 1 hour after update 
Outpost lvl 3
im takinn it slow k
me as soon as i logged in after maintenance
Yeah see that flutter, that's why dont directly connect 4 thermal banks straight from a battery packaging
Yap yap just chill
and in valley 4 nothing happened
Hmmm.......
yeah i got 90% of the way there but I had no operator bonus for prosperity ๐
no avywenna?
Ahhhh so he/she has the output of the packaging unit to 4 thermal banks?
really? i thought it was pog or lifeng both i dont have
to 2 actually
well, i had
Ah so 3 batt/min are gone?
yes
I see"
now im using 1.5
hmmm i see, I just noticing it now . . . i thought it was faction-> outpost prosperity hobbies-> sample gathering expertise->active defense
Will that flutter turn our thermal bank off?
amethyst is so incredibly useless
make zipline
looks like have to manually check each operator ๐ til
Since it'll have like many batteries inside already
if they had turned off for even 10 seconds the factory wouldve shut down so i doubt it
How do we mine Cuprium again
wait a sec I just checked . . . all the operators do follow this except ayywenna
help my lazy ahh
use the new rigs
Using the newest mining rig, which is powered by water, not electricity. Have water pump near the mine and connect them
are the sc batteries even worth producing for stock bills? dont they take double the xiranite + ferrium so we're net neutral in raw resource to stock bill efficiency?
I tried to pump normal water into it
but it didn't connect
Hmmmmmm yea I guess dat's possible
Hmmm it should've work :/
After making my syringe, my area looks neat
I'll try again thank you
ig imma add the extra 2 forge skies now
Can u screenshot?

lvl 3 outpost doubles the hourly stock generation. so you keep up by producing higher value items
Just in case, make sure u're using water pump instead of the pouring out one
@marble yarrow 30 to 12.5 was just the first problem, now i need to do 30 to 8.75 
you dont plan on making new components?
Ok lets say, you are currently at 3.9k/4k power, you're using 4 thermal banks which are directly eating battery from 1 packaging unit, it looks normal but as soon as you log off, once a while one of the thermal stop working for a period of time, resulting in your stored power dropping, when it's turned back on the power come back to normal, but if you dont have much surplus power to keep up with the downtime of that one bank, eventually your entire electricity goes to 0
hmm is this stable? also what's good to metatransfer now?
gonna go insane
ratio things
Already done. I have 4k

can meta transfer parts
how do u ratio 8.75 ๐ฅ
i think ill shutdown my component factory when i cap them out
7/24
wait so like, you can only do up to four cupriums rn...
but making a drink at optimized speed requires 3.
belt = 30
split into 3 so 30-> 10-10-10
take one of those 10 split in half to 5 in half to 2.5 in half to 1.25 ๐ if you meant splitting out
Ahhhhh yeaaa it's possible
a drink at full speed requires 4
so what do you do with cuprium if you want 12 batteries lol
wow the 1.25
wait i unironically need this, thank u
i was bashing my head against the wall for half an hour now
i actually trained my google gemini chat for it
U can't sustain 12 batteries if u want yazhen + gear components too
it was a bug I encountered today and Hypergryph fixed it, thanks for the help
Ayeeee
yeah you basically have to pick ebtween Yazhen and gear right?
which better?
you can also do half/half
i produce components at 50% efficiency and drinks at 75% efficiency
doesnt gear require xiranite though
Or just get 10 batteries per min, no need 12
it does
you can just make 0.5~1 component/min
There's also visual bug with pipes, sometimes they dont show the liquid inside and it looks empty but there's still liquid inside, dunno if it's just bc my low specs or not
idk once you stockpiled 5-10k Gear there isn't much reason to hoard more i feel
esp if you already hoarded xiranite from the patch before
10k is enough for one full team
Doesn't 1 character need like 10k gear comp?
i think
True
if you got more than enough xiranite component hoarded
just
just use those for artifice silly
spending 16k on cuprium gears sounds like a huge scam when you can spend 8k on xiranite component dupes
Im sure next patch theyll add more gears again
Lvl 90 gears comin
and a new resource so that your stockpile is pointless
Yeah i saw 2 new more ores incoming
How many miners can be powered by 1 pump?
Well the point of having a factory is u gotta meet the world's demand
3-6
6 low purity, 3 high purity
High purity needs 1/3
Low purity 1/6
Damnit I need to redo my pumps I have a 4 somewhere
i would have no problem with the gearing system if catalysts werent capped at 80 per week
what's doable with the extra yields especially the cuprium bottle ๐
just do 1 pump for every 3, you're going to have to back track too much once more regional development levels improve purity of remaining low purity nodes
Whats with those extra bottles?
i wonder about that. jingyu valley purity supposedly already reached max but there are still quite a few low purity nodes
time to wait chat
for the red components and stuff

factory is back operational on me
same
2 fitting unit 1 moulding unit
so 60 cuprium parts
30 cuprium bottles
Issue is syringe A wants 60 parts while gearing component also wants parts so i have it 50-10
which leads to 25 bottle/min used in the syringe
is this correct?
you've gotta be fucking kidding me
what's the policy with spoilers for the new area?
Is it worth to have LC WULING BATTERY IF WE CAN MAKE SC VERSION ?! (For trading and Powersupply)
I THINK ANYTHING GOES BUT HOW DID YOU GET SPOILED
oops
had top view on
no it's not that
you need sc version cause outpost stockbill generation increased, and sc batteries sells for more bills
I want to say spoilers
So keep both is your answer r8
the policy is we ball
it's factory related, not story related
Factory spoilers no way
this is my syringe/component setup
what a spoiler
not sure . . . currently trying to figure it out rn im thinking of making extra syringe C instead of LC
max RDL and the new area and we still can't go beyond 90
there's two mineral deposits in the new area, both for cuprium
theres not much to do with ferrite rn so i dont mind
and the three new RDL tiers don't increase the purity of the ONLY FERRIUM VEIN IN ALL OF WULING
ngl chat
new healing item and the preferred trade for the sky kings flat
oh nice idea, giving me some new ideas to fix my issue
new healing item is made from cuprium

oh there's another one?
I thought the syringes were made with ferrium bottles
well at least they changed the target item
I mean the ones you used to need for sky kings flat
didn't know they added another one
well shit they changed the preferred trade
30/min per production line
wdym it was always batteries
guys i optimized everything, but my ferrium gain is low, is that already including metastorage ?
I am 97% sure they wanted syringes before
they didnt
no, with metastorage it should be 115
6/min component is crazy
ur using 3 power banks?
Yeah he's using lc batt
lc batteries shouldve been blue...
You have 50k+ ferrium in store, so wait a bit and see result, otherwise you have problem with product line
also using up only half of cuprium parts so itll clog up soon
claustraphobics fear me
๐ just decided i will just use up extra cuprium bottles in depot delivery . . .
You're not regional lvl8 yet
i dont need this game remind me of my work
how many cuprium farm do you guys have for the armors?

This is old image
this can run consistently right?
just check your aic report
That's such a big bp, but as long as it works then sure
aic report shows any potential problems if you let it run for an hour or so then use it to fix
Just need 10mins to see the problem lol
sewage blockage wasn't showing in 10 mins for me . . .
it messed with my xiranite production after like overnight
i briefly considered sewage cycling if there wasnt enough to spend cuprium on but that would be sooo complicated
Sewage is a bit trickier, cuz those unit can store up to 300 or something
Same thing actually, you'll need 2 treatment unit for sewage either way
but you wouldnt need to process 2 cupriums
it needs to be run for 3/min
Why wouldn't you, you still need them for syringe A
so, just got a good tip from a friend, if you transfer a small amount of cuprium ore or cuprium parts to valley IV using backpack or dijiang trick, you can then metatransfer it back for free extra production
which is why i ultimately didnt do it
Why 3, you should aim for 12/min battery, (6/min each)
now make a ring of towers around it
definetly went down by abit
i cant place anymore sadly
theres a limited on it
yeah somethings wrong
need to produce 12/ min other battery to lvl the AIc
Oh you're not maxed yet
is it can run consistently
How do I get water to the new mining rigs when lines limit is right here?
buildings must grow
what you think abt mine
Unlock underground pipe first. Alway do main quest first
Do i just have to have a bunch of pumps or is there something i can do to use less?
these stashes are abit concerning, 1.1 update launch is already over so you dont need to keep more to level outpost fast
use pipe splitter
1 pump can sustain 4 facility
Oh yeah i forgot about that
I already unlocked the new skills, i just haven't done the tutorials of it
Thanks
thank you!
Wtf r those stashes D:
Why would we need it?
be sure to connect inlet to pump tho
use conduit
i mean true but it works so yh :D
to store batteries for extra storage who needs lvl up the AIC fast
here, i dont have delay in it for ferium
Roger roger i will do the tutorials to understand the new buildings and see how it goes
Ah so u can transport em to wuling?
yes and sell later
so, youre making ferrium bottles and 2 ferrium parts. thats 120 ferrium/min. theres only 90 ferrium/min on the map
But we're kinda capped by outpost bill generation no?
2 pump is enough
yes but they probably upgraded a day later I think
Owww got it
tysm for the reference
I did like this lol
a more sane way to do it really
yas, have 2 bottles and 2 parts since 1 outfit in fitting unit is directly bottles
idk. but it shouldnt be consuming more than its making thats for sure
looks kinda good, i just wonder if metastorage is already calculated in, if no than its sufficient
25
yeah and before ferium bottle runs out, wuling lv10 is gonna be here and fix it with better purity mining spot
So true
Which of the pinned blueprints is the best one for completed Wuling endgame?

i wonder if it's a bug since cuprium bottle and ores do not show up as an option
if it makes 12 batteries and 6 syringes its maxed
tbh when it gonna increase wuling city mineral I thought that included ferium too
I recommend leander blueprint, he's the goat
Totally not biased
also cause the 2nd point about it being source region . . .
wuling is really stingy about copyrights
no sprinklers no pipes no cuprium
cant have shit in valley 4
what's the use of xircon?
SC wuling battery
hmm reminds me to transfer xircon to valley depot see if it can transfer
oh
also xiranite/cuprium components
oh really? even with cuprium bottle or ores in valley IV depot, you cant metatansfer? then its definitely a bug that it works for cuprium parts
didnt pay attention earlier to ferium cause yesterday i still had delay in it, someone pointed out it was not needed so did abit rework
i had to resort to blueprinting
execution tomorrow
endfield made me realize that i probably shouldn't try to minmax my factory setup
probably why i got frustrated really quick
and still wrong !
like goddamn
there is
a lot lot of output slots left
when i blueprinted the blueprint route
like yeah, maybe i shouldn't have tried to max things out and be more casual about it next time
๐
how can it be wrong, or what spot do you mean exactly
don't see any changes
yeah. the battery setup takes up like 40% of the core aic area. it can get a bit daunting
only yazhen you can sell
thats kinda dumb
Are these two the only cuprium ore nodes so far?
i think it was the same way with berries/lemons in v4
yeah it's a bug, notice how you can see cuprium ore and parts on the AIC report for V4 side, but other items like xiranite doesn't exist
I MEAM I GET IT YOU WANTED TO MAKE Xircon ! but only need`s 1 line of powder ! NS FOR PACHAGING YOU NEED SOMETHING LIKE THIS !
is it? the blueprint i pasted takes a lot less than that lol
that one was from yesterday, i just build it without testing since i needed parts
either that or we'll eventually get a v4 expansion that allows production of cuprium
How many cuprine nodes can be supplied by one pump?
depends, 3 high purity or 6 low purity
yet u are still cloging !
i might have overblown it a bit
i think atm you technically only need 2 pumps but 3 pumps is just easier to setup
dont mind the Mo;ding unit !
why are we moding 
time to sleepge and let the factory done it deeds
fluid pumps get 1 water/s
rig needs only 1 water every 3 seconds
so 3 rigs
that's high purity, low purity is 1/6s
If im making xiranite,so which section would they go in the local depot in the products right?-
yeah but you're saying needing 3 pumps
right now we have a total output of 120/min, One rig can supply enough for 60/min
no I'm saying technically two if you rig up both efficiently with inlets/outlets
but you'd need a cross map network of inlets/outlets which is annoying, and for a small boost to efficiency
IDK how to make those xiranite going up to 120 per min becuase for some reason the max is only 90, while the xircon porducion was cut in half
Yeah lol i just learned about low purity is only 1/6 water, but im too lazy to redo all of the pumps, and eventually they will be high purity anyway
something wrong with your forges
yeah exactly, just too much effort for 10 energy saved lol
will this keep my base powered enough to not go offline?
Show pic of your xiranite production
Inb4 it's sandleaf
how can i get water here for rigs?
couse cloging sewage ! as for Xine / for sure a band is off !
Conduit
connect via inlet/outlet conduits is the easy way, you can technically just keep bringing it over via pipes
there's a small platform just north of there where you can put pumps, iirc
now is 120, when i double check it, one of forge sky didnยดt have it pipe water as i accidentally delete it now is back to 120
thank u both!
nice
solved the problem i think
is it not possible to double up xircon effluent/xircon production? since we have 6 inputs/outputs in total in the reactor
this guy did one input for FOUR water demands in all cuprium slots when it should've been two pumps
we have 2 fluid and 2 item inputs, and two of the same for outputs
and no it's not possible
will leveling up the sub aic increase regional development lvl?
crucible doesn't make things fast enough
No
True
well that sucks
while yes you could get the flow rate higher, it will just clog it
upgrading aic areas does not affect RDM
upgrading outposts does
one give the true answer pls
i did
However
i mean we both did, your question could be unclear though
outpost means sub AIC selling section right?
yes
how is it unclear tho
I'm not sure if u're asking about leveling up ur outpost, or aic facilities section
idk, could mean upgrading sub AIC as in upgrading via steward or the trading page
I said leveling up tho and other thing is just expanding AIC area right
Ahhh my bad then
True"
bottleneck at your xirantie production?
Maybe your Forge/Xiranite production lack of Water needed, like u need 4 Pump to have 120/xira per production
How to check if the node pure or not?
inspecting the mining rig should show it or do it in the map click on the ore
I mean, between different nodes that close to each other, not on the map.
put a rig down and check via menu of the rig interface
weird, it was just a bug or timing issue but now my data looks perfect
go to the rig window
high purity minespot has glowing light that rises
not if your special effects are at minimum 
i have so much extra room in my factory
yup but I also recently changed my graphics/performance setting in-game and that minespot glowing thing disappeared/wasnt noticable for me.
what do you guys do on inert xircon?
water treatment facility
aside from that
nothing
this xircon produced 60 per min but now it procues 40 and tbh idk if is because of sewage/pipe
REVERSE
that looks right though no?
yo guys just wondering if its possible to have 2 SC wuling battery production without lacking of originium
u out 2 ways same thing !
how is your sewage line connected
not sure I can optimize it further than that right?
I use a splitter to power up a thermal bank too for power so I get 6.6k power and use about 4.1k
as for gear pieces I can turn off some depots to let it run for a bit (so I make 6 batteries and 3 syringes instead) yet to find a better solution. but once I have enough I turn it off. (also ignore the ores its readjusting)
check each reactor for if there's any clogged outputs
Whatโs going on with your xiranite output for the cuprium gear
Do you have stockpile
that would clog to 30/min, they look different
any gearing components?
The gearing unit xiranite input flow looks staggered
Can you screenshot that section too
And do you have xiranite already stockpiled
If your gearing unit isnโt producing at top speed your cuprium will cap and your sewage output will drop
Then you cannot sustain more than 4 xiranite outputs
is it better to meta transfer cuprium ore over ferrium now?
Xircon should be 60 ! a pipe is not right ! in the out/in !
unless you're doing components no
actually imma just say it's a no
you make more by transferring ferrium
Let me see this section
Is anything off
your sewage lines are wrong
it's not
it's theoretical 120/120
isnt ferrium just for the medicine solution c?
I donโt get how though
finally aic has some uses kek
idk how to do that sewage system
Doesnโt make sense to me
c is 16, a is 22
ferrium is weight 1 and cuprium weight 2, so you get half of 22 if you transfer cuprium, for 11
Oh okay ty
you need two sewage lines (use a combiner) for the next xiranite product after fluid
i forget the name of the fluid 
balance 
btw this is akward , and all rig`s are powerd and working !
oh no lol
not again 
now you gotta check to see which one is in storage mode
If youโre using the hydro drills, did you make sure that each pump corresponds to the right numbers and types of ore deposit
How do I make the lines go faster
I wish i could trade Valley IV stock bills to Wuling Stock bills at like 1:10 exchange rate or something
stop production at the end and let it all cap out
then turn it back on
we can make cuprium as a god?
what i should use in regional transfer?
if its the right production ratios to sustain it should keep the belts full
no ferrium is better
Ok basically it's like this, 1 sc battery = 2 xiranite liquid + 2 xircon liquid + 1 xircon solid (5 total crucibles)
And you need 1 sewage per second, the xircon solid already making 0.5 sewage back into the cycle, so you need 0.5 sewage from outside which is exactly from 1 copium refinery
i just noticed the price are double like waaaaat 
8k vs 16k but why such a big diff
i only use 2 rigs/pomp !
because the outposts generatemore stockbill now
probably because of increased stock bill sources
Inflation is real even in game lol
you get like double the amount of bills from trading now iirc
also looks like cuprium is from the stockade so maybe they taxing us
what next, 12dola a cup of boba tea?

Copium refinery XD
say... how much power does an SC Wuling battery yield?
3200
Three thousand two hundred
ho hoo, interesting
That's why you gotta get everything done below 3.4k power
Is anyone also still having trouble with Xiranite? We just got two more forges but still can't keep up because demand spiked too.
pwm tech 
whats wrong with your forge production
it should be 120/min yield but yours keeps going down
missin water
i think the planters might be messed up actually
One sec, loading into game now.
Like the planting unit?
Cuz it still doesn't work
Maybe cuz I consume way too much sandleaves?
at the end, the planting unit is the start
oh no one fixed that problem for you? your setup is wrong
let me find a pic
this is two 30/min
use half
for one or use both
found the prob ! the pipe was off possition :))
We have just two ore in new area right so how do I level up the regional level than?
upgrade depot, stock, outpost, recyclers, env station
same shit as always
I have all recycled station maxed depot lemme check i had everything maxed before updates
Level up outpost
new level caps
so what stuff i am missing exactly
Everything basicallyl
level 3 outpost, environment station, depot, stock redistribution
Thanks
That is gonna take time ig
yes
Domain Expansion
||Misinformation||
Okay, so I've been racking my brain at this for awhile, and figured I'd just come here to see if I'm insane, or if there is no solution.
Basically, it "seems" the only way to properly manage sewage water is to optimize inputs and outputs. I ran into the issue that I basically set my factory to make "Cuprium Parts" primarily as a means to produce sewage water to fuel the bootstrap half of the Xircon factory (With the second Xircon factory self fueling with its own produced waste feedback).
Alas, my factory "filled up" on Cuprium parts, leading to the lines backing up while I was asleep, sewage water production halting, and Xircon not getting fed to the batteries, blah blah blah...
BASICALLY, in an ideal world, I would have a feed system that first put sewage water to use, but whatever wasn't being used, hit a protocol stash, and then went to a seperate facility for water treatment. I'm doing a similar system with all cuprium parts right now, where each has a "fallback" storage protocol (IE, I make parts, but I don't store them, i send them to make components, if components max, there's a protocol storage between the fitting unit and the gearing unit, so instead of backing up and halting production of Cuprium, thus halting my sewage source, it starts storing parts... in addition, i also have a protocol stash between the cuprium and the fitter, so nothing gets stored until things back up, but then, if they get backed up, i have a seperate small factory that produces and stores Cuprium bottles to act as a "sink" to keep the sewage producting even if I cap on Components and Parts.
The Xiranite lines for the gearing unit "component" are filtered down to minimal feed by a DAC operating at 1/128 with splitters and mergers for each, but, the DAC is built so that when it "backs up" all Xiranite shunts to the gearing components, allowing a perfect final sink, without shutting down Xiranite reliance.
What
technically the outpost has enough stock you just need to do the trades
Remember, each plant makes 3 powder, so use up all output lines on a shredder.
But... point is even with all this, I can't figure out a way (Either because there isn't or just I'm brain fried) to make it so that I "use" sewage water where needed, and if it isn't needed, rather then just wasting and sitting idle, it is treated providing no bottleneck or sink like I'm basically doing for all other parts of the line.
try using pwm but with sewage
... wow, so simple... right, so 99% goes to where I need it, but if it backs up, it gets routed to treatment.
thanks XD.
yes
you can use the cuprium produced for sewage to make parts or bottles and then use it them for the consumable A.
also delivery node you can use the excess tehre
Just run your factory on vibes
no problem, you can also do three lines sewage combined into one since there's enough and it doesn't cap the pipe (1.5/s out of 2/s cap
any over cap will bypass the pwm filter and be treated
I was told the solution was to have a 2.5 sewage line hooked up to the machines and a treatment so that when the machines fill up it just all goes to treatment
Facilities that can't mirrio
Why can't they just make normal facility that requires water input
Like 2 input from 2 opposite side
that doesn't really work though
So i can make something mirroring
unless I'm picturing it wrong
i just split my AIC in half and copied my setup but rotated
I'm doing the xiranite type with the infinite sandleaf
not with jincao?
So my plan is to make 2 of those line that mirror through a main axis
xiranite production right?
Yeah
All the lines are essentially the same since I just copy/pasted after building one.
your grinders
actually brb
Is the pipe capacity two or three
2/s
Wait
I have an ingenious idea
If the leak of skyforge cap is 6
I can make a cluster of 3 xiranite line
With the middle one being fed by the excess sandleaf powder of the rest

Ok, I think I see the problem now, thanks.
I'm just afraid that shit will take up alot of spaces
But it's 1.1
Space doesn's matter much yet

I finally finished my main AIC with 12 battery + 6 yaz syr [A] + 3 yaz syr [C] and a lot of free space. Sub AIC is empty. 
how tf do you figure out how to minimize your space usage
like actually
i caved in into blueprints cuz i got mad
Alot of pain an suffering
Thinking too
Can someone guide me how should I proceed to max the regional level and max production
Like i had the latest layout from that forum but now as new things came should i change my production or keep them same? If have sub pac lvl 2 and those old stuff main pac just 1 area expansion and depot bus
np
But you get kinna used to it if you've done it for valley 4
i kinda blueprinted that so uhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
like i get the logic behind it
but the process pissed me off cuz of the addition of the pipe entry coming from the side LOL
max regional is upgrading all depots, stocks redistributions, outposts, environment terminal for wuling side, and doing quite a few recyclers
i dont get it, why everything so low. Even all the ore yield are low
layouts.. change for wuling side when you get outpost level 3
I did the same, and some I more optimize, some change for my usage. Also previously I like to use calculator at github for optimization.
I mean my subpack is lvl 2 first i need to max it for it I need more stuff to farm so should I change my layout to some other one i was following the one given in forum
Long way to go i mean
not using enough > no space in depot > miners stop working > yield go down
use ones before 1.1 update so lc and c meds
i think it would've helped a lot for me personally if theres a way to keep the production tree available to be checked in one click
i accidentally crippled my aic and put purple batteries in, how long is it supposed to take to revive itself
its been like 5 mins so yea
just take batts from valey4?
i did
Yep been using since the launch is my production slow cause I am still stucked at that stage even though I am daily selling the stuffs
idk why its still 0
load them right into power banks
you need two thermal banks with purple batts not one
it should start working right away
oh ok
You have to kickstart it with extra thermal bank
Also I don't use full AIC blueprints. I was looking for good compact blueprints for one production.
made it yourself? you can use the blueprints in the forum if you'd like they're quite reliable
ig blue battery dont work
Essentially you need above your current power usage of 2.46k
nope i copied from aforum
so use however many you need to reach above that
is it making components too? at 3/s
yep
yeah turn it off
cauise i dont use it now
make another battery line
ummm its still not working
also regional transfer some ferroium
you need 3 thermal with the blue batteries
xiranite fram too should i remove
this one right
batteries need xiranite
just replace with battery
yes
Did you even build your own AIC ever?
Kickstart it with 3-5 unconnected powerbanks, stocked fully with batteries.

