eager summit
i have seeds that i need to bring up to the main floor but the elavator is broken and other elavators work. https://medal.tv/games/the-last-caretaker/clips/lu3Z7Gbm9nKYCWGZF?invite=cr-MSxSb3IsMTY4MTU3Njk2&v=30 and i will see if i can provide my save
here is my save(its too big so i put it in a dropbox): https://www.dropbox.com/scl/fi/lo8542yem49ma4ql5um5u/76561198306510451.zip?rlkey=alimxseqc04vc71lt745l8bz3&st=nk1iycjy&dl=0
ruby ferry
it's beacause he don't be on a floor, u have to go in the elevator to manual active it
eager summit
it's beacause he don't be on a floor, u have to go in the elevator to manual act...
i did that
hasty wasp
is the complex powered yet? if not you need to find a different way into the station and power it
fervent locust
Some elevators are indeed broken/bugged, devs are aware of it though, according to known issues list.
Let's hope there is a patch forthcoming shortly. Cause I'm stuck as well, because of broken elevators.
eager summit
is the complex powered yet? if not you need to find a different way into the sta...
It is fully powered
hasty wasp
It is fully powered
it wasn't bugged for me which is why i was checking. bugs are to be expected this early on
eager summit
Some elevators are indeed broken/bugged, devs are aware of it though, according ...
Is yours fixed in the patch?
tacit cliff
I had the elevator stop working for me, it turned out there was a small bollard stuck between the lift and the wall... once I removed it, the elevator worked again. idk if its the same in your situation. there are cases i've come accross where the call buttons down work, like the oil rig, but the on lift buttons do. however, when I had the issue with lazarus main entry lift, the call buttons worked, it was the blockage that bugged it and got the lift stuck.
eager summit
I had the elevator stop working for me, it turned out there was a small bollard ...
I just tried and looked and I found nothing stuck. Maybe a cable bit I removed it and it doesn’t work still
tacit cliff
thunderrock... I checked your save. you've a few issues. the cables need to be moved... hug them to the wall. You have a bollard stuck aswell... just like i had... its behind the platform control panel
also, you're not providing enough power to the main breaker on the roof, you need to put in a battery and a lumimax and repair your wind turbine
eager summit
also, you're not providing enough power to the main breaker on the roof, you nee...
Ohhh ok ty I appreciate it
tacit cliff
no problem. as long as you move the cables away from the lift, remove the circled bollard & give enough power to the main power switch on the roof... your lift will work again 🙂
