I'm encountering a "Radar error restart the CAR" message when using Sunnypilot on my 2023 Hyundai Santa Fe Calligraphy. I am using release-c3 which i switched to about a month ago from Stock OP. I never had this issue on stock OP. This error started happening about a week ago and it is becoming more frequent. I had used used Sunnypilot at the beginning of the year and was getting the same error but never reported it. I switched back to Stock OP for 7 months after that with no issues. I have a short three minute route where the error occurs. I will post it once i upload the logs.
#Radar Error: Restart the car
63 messages · Page 1 of 1 (latest)
This is fixed in staging-c3, can you please verify?
Yes, I will install that branch and see if I still get the error. Thanks for the quick reply.
I installed staging-c3 and went on a short ride, no error. I will use for a week to make sure it doesn't come back as i wasn't getting the error on every ride.
@charred lodge yesterday i had the Radar error restart the car message while on staging-c3.
I had two more radar errors and a no panda situation this morning, I will attach the routes once I upload the logs. All while still running on staging-c3, I never had back to back radar errors before after restarting the car.
This is the route ID for the First time i got the radar error after using Staging-c3 branch: 2cd5c775e97b2458/00000045--5d8a2a4e62
This is the route ID for the Second time it happen and i got a No panda Error and i had to restart the car to clear the no panda: 2cd5c775e97b2458/0000004b--71145f0310
This is the route where after restarting after the last route, it cleared the no panda but still had a Radar error: 2cd5c775e97b2458/0000004c--2528d2b0e9
i had that error before my issue was the wire causing that issue. if possible change wire to check if that might be issue for you.
Thanks but I doubt it’s the wire. I only have this issue when running sunnypilot. I had zero errors with stock OP running for months between using sunnypilot
I'm having a similar issue. I get an "Open-Pilot is not available. Please restart." message on a 2022 Hyundai Santa Fe running sunnypilot latest release branch. So does switching to staging-c3 fix the issue or is it just a temporary fix? Same as you, I've never really had that restart message come up under stock OP.
Honestly I couldn’t tell you. I’m still on staging-c3 and it still happens from time to time I get that error. Sunny last told me he is working through the backlog when they announced the issue with people getting banned so I’m just waiting for him to look at my logs and let me know what’s going on. But like I said in my initial post I never got the error running stock OP .
I've started seeing the error Radar Error Restart the Car today on my Acura RDX 2021. I am on the dev-c3 branch.
Got a route?
@tawny thicket @steep osprey @clear gulch is it still an issue?
Yes, I had it happen just last night do you want that route as well?
Yes please!
@charred lodge 2cd5c775e97b2458/0000004b--71145f0310 this is from the beginning of this month, unfortunately i forgot to preserve the one from the other day. But i believe in this one i got radar error and no panda error. i checked and it looks like i uploaded logs for this one. I have another route after this where i restarted the car and still got a radar error. Let me know if you need that one and i will go upload the logs for it.
@charred lodge I just doubled check and i did upload the logs for the trip after the one i just sent where i got radar error again after restarting the car. here it is 2cd5c775e97b2458/0000004c--2528d2b0e9
For me it looks like a hardware issue, have opened a support ticket with Comma
@charred lodge have you gotten a chance to look at the route logs I sent?
Same issue here, tried unplugging, cycling power, rebooting. 2021 sonata hybrid running dev-c3
Hmm I never got a radar tracks available except the first time I switched to the test build.
@charred lodge happy birthday again. It’s been a while since we last heard from you about this radar error issue. I was good for a little while since I last sent logs but now I’m getting it from time to time again.
Yeah I get this all the time.
@here we’re refactoring sunnypilot at the core, so this should be handled once done. Stay tuned!
Which Uniden is that?
How are you able to safely do 18mph 🤯 I can’t see anything clearly out of that windshield!
R8
I was moving to a spot that was sunny to help expedite haha
I had my windows rolled down
I’ve been using the R7 with a custom firmware, R8 is even more wild then haha
Is that the firmware made by that guy on rdforums?? How is it? I have only KA bands here
Yes! I got the firmware from “Mithheru” that authored the custom firmware
It’s very very nice, the new version that’s coming out will have “stealth mode”, which is pretty exciting (no clue what it is yet tho)
More customization and better false-positive mitigation
Which had been fairly annoying on highways prior to this custom firmware
Wow that is nice! I'm in the rural USA and my commute to work is mostly surrounded by farmland, so I don't get any falses thankfully.
New user, 2022 Kia Niro PHEV. I get the Radar error immediately. Works fine on OP and FP. If I'm reading correctly you have a fix in the works? Willing to test as needed.
We're refactoring sunnypilot now, which will also have this fixed when ready. Will ping when it's ready to test!
I've also been experiencing this exact error. Happens upon starting the car. Have to reboot C3 and cycle the car to fix it. On dev-c3
New rewrite will fix this!
I'm really looking forward to it and the new driving models
Same! After MADS is merged, we are working on model selector next 🙂
I wonder if stealth mode will help with the spectors, aka the radar detector detectors
Also plz fix I'm dying bro
@charred lodge is there an ETA for this to be fixed? I'm in a really cold climate and have to reboot the device every single time I get into the car and it sucks
Watch out for the announcement soon!
Radar Detector & Countermeasure Forum
As of today, I've just completed v159 international for the R7.
This update builds upon v150 and v157 international and is now available and released for all hardware versions!
In coming weeks I hope to put some new release notes together and I'll keep this first main page updated.
I will aim...
I'm using this now on my Uniden R7
It's actually quite good
Wow I'll need to check that out, thank you!!
I haven't seen any updates, so I'm guessing it's still being worked on?
#dev-feedback message
We’re no longer updating the current version of dev-c3. Are you still seeing the same with dev-c3-new?
I had no idea dev-c3-new was a thing lol
Haha, we’ll have an announcement somewhere for dev-only then 🙂
Might have gotten buried
Is dev-c3-new taking place of dev-c3? Should everyone switch over?
Check out the announcement I linked. I have that covered on there.
Gotcha
TLDR: features are coming back slowly/weekly, and is using the latest code, passed all unit tests.