tribal moat
just dont follow eu regulations
#04 lite settings
swift folio
ideally you change your goggles to output 1200mW and channels to 60mbps with the FCC hack. As for restrictions in your country, you will need to decide on what you wanna do
keen valley
ideally you change your goggles to output 1200mW and channels to 60mbps with the...
O4 Lite cannot go to 1200mW, even on FCC.
swift folio
O4 Lite cannot go to 1200mW, even on FCC.
sorry whatever the maximum is for o4 lite
stark patio
ideally you change your goggles to output 1200mW and channels to 60mbps with the...
Yes but... I have n3 goggles...
glacial granite
Maximum output on the 04 lite is 700mW
glacial granite
Ummm why my Is 100mw?
Firmware locked
stark patio
Firmware locked
What do you mean?
glacial granite
When you update the firmware thru DJI app, when you select region, will region lock it in the firmware to lower output.
swift folio
Ummm why my Is 100mw?
Is it possible for you to the fcc hack?
Go to the section: “DJI Goggles 2 and O3 Air Unit“ and put the ham file in your sd card.
https://oscarliang.com/dji-fpv-system-fcc-700mw/#Enable-FCC-Mode-in-Caddx-Vista
It should work on your goggles
you’ll know it worked when you have more output power options show up.
stark patio
Go to the section: “DJI Goggles 2 and O3 Air Unit“ and put the ham file in your ...
I have n3 goggles
swift folio
I have n3 goggles
yeah it should still work for it. Other people online have said so. Can you at least try?
stark patio
yeah it should still work for it. Other people online have said so. Can you at l...
I did't understand what i have to do
glacial granite
I did't understand what i have to do
Follow the steps in the tutorial link. There is a process. Need to have SD card, files, and some time. We are asking for you to at least try the tutorial posted. This is on the Betaflight Discord channel, when having issues with Betaflight. We are trying to help, but only so far we can carry this due to the Forum posted.
stark patio
Nothing
swift folio
Nothing
wrong file
it has to the file starting with ham
DJI Goggles 2 and O3 Air Unit
The procedure to unlock FCC is different for the DJI Goggles 2, as well as the DJI FPV Goggles V2 if you updated its firmware to support the O3 Air Unit.
In FCC mode, 7 channels in 20MHz mode, 3 channels in 40MHz mode, up to 1200mW output power
In CE mode, 3 channels in 20MHz mode, 1 channels in 40MHz mode, up to 25mW output power
CE mode is very limiting, you can perform the “FCC hack” to unlock higher output power (more range and signal penetration) and more channels (allows more pilots in the air at the same time) if that’s legal to do where you fly.
Simply get the file “ham_cfg_support” and unzip it to the root directory of the SD card and put it in the goggles.
Download here: https://drive.google.com/file/d/1ug2U_i5kdrKQQ2I17NLJBXm2tKQeNj5Q/view?usp=share_link
To check if you are in FCC mode, go to Settings => Transmission => Channel Mode, switch to Manual, under 40MHz bandwidth, you should see 3 channels available in FCC mode. If you are in CE mode, it will only show 1 channel there.
The FCC mode is permanent, however you can go back to CE mode from FCC mode by factory reset the headset (in the menu Settings / About).
@stark patio
try this one
stark patio
and dont put it inside any folder in the sd card.
But 04 lite have only internal storage
swift folio
But 04 lite have only internal storage
no put it inside your n3 goggles sd card
you dont need to touch the o4 lite
stark patio
DJI Goggles 2 and O3 Air Unit
The procedure to unlock FCC is different for the ...
Like this?
swift folio
Like this?
move the ham file into E: drive
and delete those two folders “unlock_fcc_unzip…”
stark patio
move the ham file into E: drive
Now i had to put It in the goggles, right?
Ok It worked!
II have to thank you all for helped me
swift folio
II have to thank you all for helped me
no problem. so your unit can only go up to 700mW max