when i try to read my esc in esc configurater it says failed to read esc 1 2 3 4

[latent python]

2025/04/20 09:19:21: Chrome (135.0.0.0) on Windows
2025/04/20 09:19:45: Port selected
2025/04/20 09:19:50: Opened serial port
2025/04/20 09:19:50: MultiWii API version received: 1.44.0
2025/04/20 09:19:50: Flight controller info, identifier: BTFL version: 4.3.2
2025/04/20 09:19:50: Running firmware released on: Apr 7 2023 03:15:27
2025/04/20 09:19:50: Board: SBF4, version: 0
2025/04/20 09:19:50: Unique device ID received - 0x029002b3433510433373737
2025/04/20 09:19:55: Trying to read 4 ESCs
2025/04/20 09:19:58: Failed processing command cmd_DeviceInitFlash after 5 retries.
2025/04/20 09:19:58: MessageNotOkError: Message not OK
2025/04/20 09:19:58: Failed reading ESC 1
2025/04/20 09:20:01: Failed processing command cmd_DeviceInitFlash after 5 retries.
2025/04/20 09:20:01: MessageNotOkError: Message not OK
2025/04/20 09:20:01: Failed reading ESC 2
2025/04/20 09:20:03: Failed processing command cmd_DeviceInitFlash after 5 retries.
2025/04/20 09:20:03: MessageNotOkError: Message not OK
2025/04/20 09:20:03: Failed reading ESC 3
2025/04/20 09:20:06: Failed processing command cmd_DeviceInitFlash after 5 retries.
2025/04/20 09:20:06: MessageNotOkError: Message not OK
2025/04/20 09:20:06: Failed reading ESC 4

[fading wadi]

Hey! We think our bot can help with your question; click the button below to generate an answer.
Please also give us a support ID

1. Open the CLI tab
2. Click the "Submit Support Data" button
3. Optionally enter a brief description of the problem
4. Wait for it to finish
5. Copy the resulting support ID
6. Paste it here

{'cause': 'thread creation'}

[latent python]

Id: "36bf4e4a-fe9a-4962-b3c6-b41ebc3a429c"

[fading wadi]

✨AI-Generated response✨

That error often means the flight controller isn't successfully communicating with the ESCs in passthrough mode.

Make sure you have a battery plugged into the quad when trying to connect to the ESCs. Also, ensure you've selected the correct ESC/Motor Protocol in the Betaflight Configurator Motors tab that matches your ESCs (like DSHOT300, DSHOT600, etc.).

The provided documents don't detail this specific error, but general troubleshooting steps often help. You can review the Motors tab configuration here:
Motors Tab

If the issue persists, please ask in the #1052457584772255784 channel for more detailed help.

-# {'cause': 'button press'}

[timid jay]

maybe ask ESC-COnfigurator Discord:
https://discord.gg/QvSS5dk23C