Resource ledstrip

[dense widget]

i have speebybee mini 405

the ledstrip pad not working

What do you advise me to do to resource one of the pins to work

Id: "d1af55a7-1f94-48f0-a1e6-7f8388b04cb9"

[trim vigil]

Hey! We think our bot can help with your question; click the button below to generate an answer.
Please also give us a support ID

1. Open the CLI tab
2. Click the "Submit Support Data" button
3. Optionally enter a brief description of the problem
4. Wait for it to finish
5. Copy the resulting support ID
6. Paste it here

{'cause': 'thread creation'}

[low stirrup]

resource LED_STRIP 1 A08
save

https://github.com/betaflight/config/blob/d01892da28fb33274941b10fbf2f92e6f033305c/configs/SPEEDYBEEF405MINI/config.h#L45

[dense widget]

Will it be solder same pad ledstrip ?

[low stirrup]

yes.. that's what the pad is for

your other option is to reflash the target, but do not put in your "broken" backup config

[dense widget]

Yes, maybe it was a mistake on my part

thank you deadbyte🩵

[dense widget]

Not Working:(

[dense widget]

The plan has changed.☺️😄

[low stirrup]

even after you reflashed the target?

when you reflashed, did you have LED Strip in the firmware options?

[dense widget]

i cant remmber that

but i can found in Bf , When I get home

[low stirrup]

you reflashed the target, right? did you applied your backup?

could you submit a new support id please

[dense widget]

Id: "d1af55a7-1f94-48f0-a1e6-7f8388b04cb9"

[low stirrup]

this says your LED_STRIP pin is still set to A00, instead of A08

the target definition calls for a08 for the LED_STRIP

[dense widget]

wait

PA8 ?

[low stirrup]

which means you've reapplied the broken config backup

[low stirrup]

PA8 = A08

see that Serial TX resource and the define for uart 1 TX pin..

[dense widget]

this new

Id: "336fc7e9-7bf2-4a82-881a-a78794651202"

[dense widget]

this old>>>> sorry

[low stirrup]

let me ask again: did you reflashed the target or did you just changed the resource mapping via the commands I have posted above?

[dense widget]

I just the changed resource 🥲

[low stirrup]

then your other option, as already mentioned, is to reflash the FC, but again, do not apply the config backup, at least the part where the resource mapping is being done (if your backup is from a `dump all' file)

[dense widget]

Nope 🥲 ,
I didn't save it

[low stirrup]

[dense widget]

[low stirrup]

why was the LED_STRIP resource different from the target definitions? did you changed it yourself because it wasn't working thinking that would solve it? or did some youtube video told you to set it to that pin, while the video is using a different FC than what you have?

[dense widget]

No... I changed it myself, because it wasn't working,

I thought I was a tech expert😂

I know I messed up💔😁

[low stirrup]

https://tenor.com/view/joker-clean-wash-you-hands-hand-sanitizer-gif-16752599

[dense widget]

😂😂😂😂😂😂😂

[low stirrup]

resource mapping is the last thing you'd do when something isn't working..

the very first thing you should do is ask, more so if you don't really know what you're doing.

it's better to ask first, than blindly try things yourself.. you'll get "haroled" more with the latter, than the former