obsidian bluff
I have a SpeedyBee F7V3 and my problem is the App on the PC say that he not found storage on the chip and on the Mobil App it say that a have storage on the chip i dont now what to do pleas help.
Betaflight Version:MCU F722 Clock=216MHz, Vref=3.28V, Core temp=66degC
Stack size: 2048, Stack address: 0x20010000
Configuration: CONFIGURED, size: 3544, max available: 16384
Devices detected: SPI:1, I2C:0
Gyros detected: gyro 2 locked dma
GYRO=BMI270, ACC=BMI270
OSD: MSP (53 x 20)
BUILD KEY: b004459a394267e3246b615f4fa9e131 (4.5.1)
System Uptime: 40 seconds, Current Time: 2025-03-09T16:56:07.487+00:00
CPU:13%, cycle time: 315, GYRO rate: 3174, RX rate: 15, System rate: 9
Voltage: 4 * 0.01V (0S battery - NOT PRESENT)
I2C Errors: 6
SD card: Manufacturer 0x22, 491520kB, 05/2165, v12.8, 'MK '
Filesystem: Ready
GPS: NOT CONNECTED, UART6 9600 (set to 57600), NOT CONFIGURED, version = unknown
Arming disable flags: RXLOSS CLI MS
diff all:
diff all
version
Betaflight / STM32F7X2 (S7X2) 4.5.1 Jan 3 2025 / 10:55:15 (77d01ba3b) MSP API: 1.46
config rev: 9905ee9
start the command batch
batch start
reset configuration to default settings
defaults nosave
board_name SPEEDYBEEF7V3
manufacturer_id SPBE
mcu_id 004f00213333511830333932
signature
feature
feature GPS
feature TELEMETRY
feature OSD
serial
serial 1 64 115200 57600 0 115200
serial 5 2 115200 57600 0 115200
master
set acc_calibration = 46,-55,26,1
profile 0
profile 1
profile 2
profile 3
restore original profile selection
profile 0
rateprofile 0
rateprofile 1
rateprofile 2
rateprofile 3
restore original rateprofile selection
rateprofile 0
save configuration
save
wheat vine
worn shoal