Try the impulse RC driver fixer
#USB device not recognized
gentle cypress
I already tried that, it doesnt detect it either
sullen crescent
Does Configurator say dfu bootloader at the top?
gentle cypress
No it says Virtual Mode (Experimental)
sullen crescent
No it says Virtual Mode (Experimental)
Then it's not connecting. You might have conflicting dfu drivers on this computer.
gentle cypress
how to I check or fix that?
gentle cypress
Then it's not connecting. You might have conflicting dfu drivers on this compute...
the problem ist that the drone is not connecting to my pc. When checking the device manager, the drone isnt detected when plugged in
gentle cypress
I tried a different computer, but it also said USB device not recognized
gentle cypress
https://hackmd.io/@nerdCopter/rJv5TUrQ2
I tried that as well but It is still not working
dense lintel
I tried that as well but It is still not working
everything in that list?
gentle cypress
as far as I see yes
dense lintel
what target was flashed? it should be DARWINF411
gentle cypress
yes it was DARWINF411, latest firmware version and then I loaded the Firmware from their website from my files
dense lintel
could be a bad flash. force DFU mode with physical boot button, then reflash.
after flashed, check for working status
if it works, do not paste full cli dump. just use the things need for settings and tune, not anything to do with resources.
gentle cypress
when trying to force DFU mode and then plugging in, it still doesnt recognize the drone
gentle cypress
no it only shows Virtual Mode (Experimental). I have no possibility to access the usb device (my drone)
dense lintel
makes no sense to me. might be Windows issue.
you can disable virtual mode from options tab.
forcing DFU should result as the screencap above.
gentle cypress
I was thinking that it could be the usb port. When plugging in the usb cable, the only lights, that flash are the ELRS receiver lights. Maybe the usb port connection got damaged