I would appreciate if someone could help me with connecting my Beta85x to my TBS Crossfire Module, i can't bind the 2 together, The light on the crossfire module keeps blinking green which indicates that its in binding mode, however on my beta85x nothing happens...
#Help
wanton tendon
wanton oasis
I would appreciate if someone could help me with connecting my Beta85x to my TBS...
The crossfire nanoRX on the drone... What is it doing? There's a button near the antenna that you push to get it into bind mode
You will need to access agent lite on the handset to confirm OTA firmware update. There might be a way to do this with the tx module button, but I can't remember how.
wanton tendon
on the one i have there is no button near the antenna sadly
only one next to the usb c port
on the right below the usb c
im stuck on this screen on my remote. nothing happens
still cliff
@wanton tendon Is the drone crossfire?
wanton oasis
This thing with the red white yellow and black wires coming out of it is your Crossfire nano more than likely. There's a light on it... What does it do when you plug in power to the drone?
It is in a clear plyable shrink wrap
I can actually see the little membrane button through the shrink wrap on the right side opposite the wires
Typically these come unbound and will boot up in bind mode automatically. Unless you got it used, in which case it will be bound to someone else's radio and you will need to push this membrane button (although current betaflight should kick it into bind with bind_rx command in CLI).
Edit: glad you got it working