I encountered the following problem: on the stand, my one motor and esc produce a thrust of 3 kg, but when I put it all on the device, it cannot rise. Its weight is 8 kg, when calculating the maximum take-off weight, it turns out to be 12 kg.
But it still does not fly.
The conductivity is high, so the problem is not in this.
There are also enough batteries, we will lose the battery with a large discharge.
The problem lies in the software part or in the communication between the political controller and esc.
Please help me with this problem.
#The drone is not delivering full power
fluid loom
dry warren
Use English so that many people can understand you.and hlep u
full rose
I encountered the following problem: on the stand, my one motor and esc produce ...
This is an international server, please write in english so that people can understand and try to help. Use an online translation service if needed
outer pollen
I encountered the following problem: on the stand, my one motor and esc produce ...
Які деталі ви використовуєте? Який розмір квадрокоптера?
Пишіть англійською, якщо це можливо, щоб інші могли вас зрозуміти, хоча я також розмовляю українською.
fluid loom
The drone is not delivering full power
fluid loom
Які деталі ви використовуєте? Який розмір квадрокоптера?
Пишіть англійською, як...
size 11"
emax 50a regulators
Ukrainian motors
outer pollen
size 11"
emax 50a regulators
Ukrainian motors
What KV motors? How many cells is the battery?