#fc is brong ?

1 messages · Page 1 of 1 (latest)

scarlet drift
#

Good morning, I have a problem with a new FC that I bought, it makes me do what I show in the video, I only soldered motors, capacitor and power cable. After it disconnects from betaflight the FC starts to heat up, I don't know what I can do or if it burned for some reason.

betaflight 10.10.0 , fc https://www.getfpv.com/t-motor-f7-aio-f722-fc-35a-2-6s-blheli-s-esc-hd-analog-25x25.html

www.getfpv.com
T-Motor F7 AIO - F722 FC + 35A 2-6S BLHeli_S ESC (HD + Analog) - 25x25

The T-Motor F7 AIO is a compact flight controller featuring advanced components such as an onboard ESC with Bluejay & BLHeli_S firmware, a quality MPU series gyroscope for improved noise reduction, 16MB Black Box space, and an integrated barometer.

keen axle
#

send FC close up photos

scarlet drift
keen axle
#

looks fine from this side, try to desolder all peripherals

scarlet drift
delicate hawk
#

How hot are we talking? You can get a cpu temperature in the OSD. It’s normal to get up to 70 degrees when sitting still. Normally the air from flying cools it off.

If it’s getting so hot it burns your skin, you likely have a short or some wires in the wrong spot.

keen axle
#

If it just gets up to 70 degrees it's normal. I thought the problem was that it was getting hot and not working.

scarlet drift