#Mamba f435 AI

1 messages · Page 1 of 1 (latest)

spare quest
#

I have purchased a Mamba F435 AI (anti interfearance) stack and i am having a bunch of issues with it. I am unable to upgrade the betaflight firmaware. Currently 4.3 out of the box but I need to update it to get osd on the DJI O3 air unit and this feature is only available on 4.4 and above. The issue with updating the firmaware is that the target MAMBAF435_2023A (DIAT) does not exist. I have tried installing the hex file and config file provided by the manufacturer but this has yet to resolve my issue. When connecting the flight controller pops up as FlightNG AT32 FC. I do not know if this means anything other then the prossessor.

status

MCU AT32F435/7 Clock=288MHz, Vref=3.27V, Core temp=49degC
Stack size: 1024, Stack address: 0x2002fff0
Configuration: CONFIGURED, size: 3856, max available: 16384
Devices detected: SPI:1, I2C:1
Gyros detected: gyro 1 locked dma
GYRO=ICM42688P, ACC=ICM42688P, BARO=DPS310
OSD: MAX7456
System Uptime: 15 seconds, Current Time: 2024-04-11T19:18:53.382+00:00
CPU:30%, cycle time: 126, GYRO rate: 7936, RX rate: 15, System rate: 9
Voltage: 0 * 0.01V (0S battery - NOT PRESENT)
I2C Errors: 3
Arming disable flags: RXLOSS CLI MSP

version

Betaflight / MAMBAF435_2023A (DIAT) 4.3.2 Aug 15 2023 / 17:41:28 (norevision) MSP API: 1.44

config: YES

diff all

version

Betaflight / MAMBAF435_2023A (DIAT) 4.3.2 Aug 15 2023 / 17:41:28 (norevision) MSP API: 1.44

config: YES

start the command batch

batch start

reset configuration to default settings

defaults nosave

board_name MAMBAF435_2023A
mcu_id 1049c12f04f5c0000d499717
signature

feature

feature -SOFTSERIAL

master

set acc_calibration = 38,25,24,1
set motor_pwm_protocol = DSHOT600

profile 0

profile 1

profile 2

restore original profile selection

profile 0

rateprofile 0

rateprofile 1

rateprofile 2

rateprofile 3

rateprofile 4

rateprofile 5

restore original rateprofile selection

rateprofile 0

save configuration

save

amber hamlet
spare quest
#

So what is the best course of action? Can i do anything before they release it? But thank you for the help and the quick response!

red rover
#

You might be able to kind of get this to work with Betaflight, not all features are functional

spare quest
#

I have already integrated it into my build so i doubt they want it back.

amber hamlet
#

someone was working on a target, I can find notify them here if you want

red rover
#

I made one

spare quest
amber hamlet
spare quest
amber hamlet
#

if you got a target done and it doesn't run 100% correctly... may be better than nothing

red rover
spare quest
#

Oh nice.

red rover
#

In short:

  1. Flash the DARWINFPVF435 target
spare quest
#

Thank you!